Parkside PKLL 8 A1 Translation Of The Original Instructions

C

ROSS LINE LASER PKLL 8 A1

IAN 290958

KREUZLINIENLASER

Originalbetriebsanleitung

LASER CU LINII ÎN CRUCE

Traducerea instrucţiunilor de utilizare originale

CROSS LINE LASER

Translation of the original instructions

GB / CY Translation of the original instructions Page 5

RO Traducerea instrucţiunilor de utilizare originale Pagina 19

DE / AT / CH Originalbetriebsanleitung Seite 33

H

V

1 42

8 7

3

5

6

5 GB/CY

List of pictograms used ............................................ Page 6

Introduction ....................................................................... Page 6

Intended use ............................................................................ Page 7

Description of parts ................................................................. Page 7

Scope of delivery .................................................................... Page 7

Technical data ......................................................................... Page 8

Safety notes ...................................................................... Page 8

Safety instructions for batteries / rechargeable batteries ..... Page 10

Initial use ............................................................................. Page 12

Inserting / Changing batteries ................................................ Page 12

Switching on / off .................................................................... Page 12

Use automatic levelling system............................................... Page 13

Using individual lines and crossed lines ................................ Page 13

Working without the automatic levelling system ................... Page 14

Practical guidance .................................................................. Page 15

Working with the tripod .......................................................... Page 15

Maintenance and cleaning ................................... Page 15

Storage ................................................................................. Page 16

Disposal ................................................................................ Page 16

Warranty ............................................................................. Page 17

6 GB/CY

List of pictograms used

Please read the instructions for use.

Danger of explosion!

Wear safety gloves!

Attention!

Protect yourself from laser radiation!

Do not stare into the laser beam!

Cross Line Laser PKLL 8 A1

Introduction

We congratulate you on the purchase of your new product.

You have chosen a high quality product. The instructions for

use are part of the product. They contain important information

concerning safety, use and disposal. Before using the product, please

familiarise yourself with all of the safety information and instructions for

use. Only use the product as described and for the speciﬁed

applications.

If you pass the product on to anyone else, please ensure that you also

pass on all the documentation with it.

7 GB/CY

Intended use

The product is suitable for the the determination and veriﬁcation of

horizontal and vertical lines. The product is exclusively suitable for use

in enclosed operating sites. Any other use or modiﬁcation of the product

shall be considered improper use and may result in serious accidents.

The manufacturer assumes no liability for damages due to improper

use. Not intended for commercial purposes.

Description of parts

1

H-button to switch on / oﬀ horizontal line

2

LED indicator (red: levelling oﬀ, green levelling on)

3

LOCK switch

4

V-button to switch on / oﬀ vertical line

5

Battery compartment

6

- Tripod thread (underneath)

7

Laser beam opening

8

- Screw

Scope of delivery

1 Cross line laser

1 Tripod

2 1.5 V-Batteries, Type AA

1 Set of instructions for use

8 GB/CY

Technical data

Operating voltage: 3 V (direct current)

Working area at least

1)

: 8 m

Levelling accuracy: +/- 0.5 mm / m

Typical self-levelling range: ± 4°

Typical levelling time: approx. 4 seconds

Operating temperature: +5 °C–35 °C

Max. relative humidity: ≤ 90 %

Laser class: 2

Wave length (λ): 635 nm

Maximum performance P max: 1 mW

Tripod mount:

Batteries: 2 x 1.5 V-Batteries, Type AA

Product weight: 250 g (without batteries)

Tripod weight: 280 g

Product dimensions: approx. 77 x 61 x 90 mm

Tripod dimensions: 65 cm

1) The operating range can be reduced by unfavourable environmen-

tal conditions (e.g. direct sunlight).

Safety notes

DANGER OF SUFFOCATION! Packaging materials (e.g. ﬁlms or

polystyrene) can not be used as toys. Always keep children away

from the packaging material. The packaging material is not a toy.

Do not work with the measuring tool in an environment where

there is a danger of explosion, where there are ﬂammable liquids,

gasses or dusts. Sparks can be created in the product, which could

ignite dust or fumes.

9 GB/CY

This product may be used by children from the age of 8, by per-

sons of reduced physical, sensory or mental abilities or a lack of

experience and / or knowledge if they are supervised or instructed

with regard to the safe use of the product and have understood

the risks resulting from use. Do not allow children to play with the

product. Cleaning and user maintenance may not be carried out

by children unless they are supervised.

Do not leave the switched-on product unattended and switch the

product oﬀ after use. Others could be blinded by the laser beam.

Risk of eye injury.

Do not expose the product to moisture or direct sunlight.

Do not expose the product to extremely high temperatures or tem-

perature ﬂuctuations. For example, do not leave it in your car for a

long time. In the case of large temperature ﬂuctuations, let the product

acclimatise before using it. In extreme temperatures or temperature

ﬂuctuations, the precision of the product can be impaired.

Avoid strong impacts against the measuring tool. Damage to the

measuring tool can impair its accuracy. After a strong impact com-

pare the laser line with a known vertical or horizontal reference

line to check it.

Turn the measuring tool oﬀ when you transport it. When it is switched

oﬀ the pendulum unit is locked, which otherwise can be damaged

in strong movements.

Do not bring the measuring tool near to heart pacemakers. The

magnet inside the measuring tool creates a ﬁeld that can impair

the function of pacemakers.

Keep the measuring tool away from magnetic data carriers and

devices that are sensitive to magnetic inﬂuences. The eﬀects of the

magnet can lead to irreversible data losses.

10 GB/CY

Protect yourself from laser radiation!

LASER

2

P

max

< 1 mW

λ = 635 nm

EN 60825-1:2014

Do not look directly into the laser beam or the laser beam

opening

7

.

Viewing the laser beam with optical instruments

(e.g. loupe, magnifying glass etc.) is associated with risk injury to

the eyes.

CAUTION! If operating or adjusting devices than other than those

described here are used or other procedures are carried out, this

can lead to dangerous radiation eﬀects.

Never direct the laser beam at people, animals or reﬂective sur-

faces. Even looking brieﬂy into the laser beam can cause damage

to the eyes.

Safety instructions for batteries /

rechargeable batteries

DANGER TO LIFE! Keep batteries / rechargeable batteries out

of reach of children. If accidentally swallowed seek immediate

medical attention.

11 GB/CY

DANGER OF EXPLOSION! Never recharge non-re-

chargeable batteries. Do not short-circuit batteries / re-

chargeable batteries and / or open them. Overheating,

ﬁre or bursting can be the result.

Never throw batteries / rechargeable batteries into ﬁre or water.

Do not exert mechanical loads to batteries / rechargeable batteries.

Risk of leakage of batteries / rechargeable batteries

Avoid extreme environmental conditions and temperatures, which

could aﬀect batteries / rechargeable batteries, e.g. radiators /

direct sunlight.

Avoid contact with the skin, eyes and mucous membranes. In the

event of contact with battery acid, thoroughly ﬂush the aﬀected area

with plenty of clean water and seek immediate medical attention.

WEAR PROTECTIVE GLOVES! Leaked or damaged

batteries / rechargeable batteries can cause burns on

contact with the skin. Wear suitable protective gloves at

all times if such an event occurs.

In the event of a leakage of batteries / rechargeable batteries,

immediately remove them from the product to prevent damage.

Only use the same type of batteries / rechargeable batteries. Do not

mix used and new batteries / rechargeable batteries.

Remove batteries / rechargeable batteries if the product will not be

used for a longer period.

Risk of damage of the product

Only use the speciﬁed type of battery / rechargeable battery!

Insert batteries / rechargeable batteries according to polarity marks

(+) and (-) on the battery / rechargeable battery and the product.

Clean the contacts on the battery / rechargeable battery and in

the battery compartment before inserting!

12 GB/CY

Remove exhausted batteries / rechargeable batteries from the

product immediately.

Initial use

Check that the delivery is complete and that there is no visible

damage.

Remove the packaging material from the product.

Inserting / Changing batteries

Open the battery compartment

5

.

Insert the batteries. Ensure that batteries are inserted correctly

(polarity) according to the picture on the inside of the battery

compartment.

Close the battery compartment

5

.

Note: when the battery is low, the LED indicator

2

blinks red.

Always replace all batteries at the same time. Only use batteries

from the same manufacturer and with the same capacity.

Remove the batteries from the product if it will not be in use for a

prolonged period of time. In long periods of storage the batteries

can corrode and can run themselves down.

Switching on/oﬀ

To switch the product on, push the LOCK switch

3

to the

position

. Immediately after being switched on, the product

releases two laser lines from the laser beam opening

7

.

13 GB/CY

To switch the product oﬀ, push the LOCK switch

3

to the

position

. When switched oﬀ, the pendulum unit is locked.

Use automatic levelling system

To work with automatic levelling, place the product on a level, ﬁrm

surface, or fasten it with the

- tripod thread

6

to the tripod.

When it is switched on, the automatic levelling system automati-

cally corrects irregularities of ±4° within the self levelling area.

The levelling is concluded when the laser lines stop moving and

the LED indicator

2

goes green.

If automatic levelling is not possible, e.g. because the base of the

measuring tool deviates by more than 4° from the horizontal or

because the product is being freely hand-held, the LED indicator

2

will go red and the horizontal and vertical laser lines will be

switched oﬀ.

Note: operation without automatic levelling will always be indi-

cated via the red LED indicator

2

.

Note: if the product is agitated or its position is changed during

operation, the product will automatically re-level. After re-levelling

check the positions of the horizontal and vertical laser lines against

reference points to avoid errors.

Using individual lines and crossed lines

When the product is performing automatic levelling and the base

of the measurement device deviates from the horizontal by less

than 4° (green LED on), carefully press the H-button

1

to turn the

horizontal line on or oﬀ.

14 GB/CY

Or correspondingly press the V-button

4

to turn the vertical line

on or oﬀ.

Crossed lines can be locked with this product:

When the product is performing automatic levelling and the base

of the measurement device deviates from the horizontal by less than

4° (green LED on) hold down the H-button

1

until the LED indica-

tor

2

goes red. Now automatic levelling is switched oﬀ and the

crossed lines are permanently switched on - even if the base of the

measurement device deviates from the horizontal by more than 4°.

You can turn this mode oﬀ again by pressing and holding down the

H-button

1

until the LED indicator

2

goes green again. The au-

tomatic levelling system has been switched on again.

The crossed lines are turned oﬀ as soon as the base of the measuring

tool deviates from the horizontal by more than 4°, and the LED indica-

tor

2

will turn red again.

Working without the automatic

levelling system

Put the LOCK switch

3

into the position .

Hold down the H-button

1

until the red LED indicator

2

comes

on. Now the product will release two laser lines from the laser

beam opening

7

that are not levelled. Operation without automatic

levelling will always be indicated via the red LED indicator

2

.

15 GB/CY

Practical guidance

Always use only the middle of the laser line for markings. The width

of the line depends on the distance.

Working with the tripod

The tripod oﬀers a stable, height-adjustable measurement base.

Align - thread

6

with the - screw

8

of the tripod.

Maintenance and cleaning

The product requires no maintenance.

ATTENTION! Never submerge the product in water or other liquid

s.

Do not allow water to enter into the product during cleaning.

Keep the product clean to ensure good, secure work.

Use a dry cloth to clean the outside.

Clean the laser beam opening

7

with a soft air jet. In cases of

heavy contamination, remove the dirt with a slightly damp Q-tip.

Do not exert any strong pressure!

For repair purposes the product may only be

opened by a professional.

Have the measuring tool repaired by qualiﬁed professionals and

only with original replacement parts. This ensures that the safety of

the measuring tool is maintained.

16 GB/CY

Storage

If you will not be using the product for a prolonged period of time,

remove the batteries and store it in a clean, dry place that is not

exposed to direct sunlight.

Disposal

The packaging is made entirely of recyclable materials,

which you may dispose of at local recycling facilities. The

Green Dot is not valid for Germany.

b

a

Observe the marking of the packaging materials for waste

separation, which are marked with abbreviations (a) and

numbers (b) with following meaning: 1–7: plastics / 20–22:

paper and ﬁbreboard / 80–98: composite materials.

The product and packaging materials are recyclable, dispose

of it separately for better waste treatment. The Triman logo

is valid in France only.

Contact your local refuse disposal authority for more details

of how to dispose of your worn-out product.

To help protect the environment, please dispose of the product

properly when it has reached the end of its useful life and

not in the household waste. Information on collection points

and their opening hours can be obtained from your local

authority.

17 GB/CY

Faulty or used batteries / rechargeable batteries must be recycled in

accordance with Directive 2006/66/EC and its amendments. Please

return the batteries / rechargeable batteries and / or the product to the

available collection points.

Environmental damage through incorrect dis-

posal of the batteries / rechargeable batteries!

Batteries / rechargeable batteries may not be disposed of with the

usual domestic waste. They may contain toxic heavy metals and are

subject to hazardous waste treatment rules and regulations. The chemi-

cal symbols for heavy metals are as follows: Cd = cadmium, Hg =

mercury, Pb = lead. That is why you should dispose of used batteries /

rechargeable batteries at a local collection point.

Warranty

The product has been manufactured to strict quality guidelines and meti-

culously examined before delivery. In the event of product defects you

have legal rights against the retailer of this product. Your legal rights are

not limited in any way by our warranty detailed below.

The warranty for this product is 3 years from the date of purchase.

Should this product show any fault in materials or manufacture within

3 years from the date of purchase, we will repair or replace it – at our

choice – free of charge to you.

The warranty period begins on the date of pu

rchase. Please keep the ori-

ginal sales receipt in a safe location. This document is required as your

proof of purchase. This warranty becomes void if the product has been

damaged, or used or maintained improperly.

18 GB/CY

The warranty applies to defects in material or manufacture. This

warranty does not cover product parts subject to normal wear, thus

possibly considered consumables (e.g. batteries) or for damage to

fragile parts, e.g. switches, rechargeable batteries or glass parts.

19 RO

Legenda pictogramelor utilizate .................. Pagina 20

Introducere .....................................................................Pagina 20

Utilizare corespunzătoare ...................................................Pagina 21

Descrierea componentelor ..................................................Pagina 21

Pachetul de livrare ...............................................................Pagina 22

Date tehnice .........................................................................Pagina 22

Indicaţii de siguranţă .............................................Pagina 23

Indicaţii de siguranţă pentru baterii / acumulatori .............Pagina 25

Punerea în funcţiune ............................................... Pagina 26

Introducerea / schimbarea bateriilor ..................................Pagina 26

Pornire / oprire......................................................................Pagina 27

Folosirea sistemului automat de nivelare ............................ Pagina 27

Folosirea liniilor indivduale și a liniilor încrucișate .............Pagina 28

Funcţionarea fără sistem automat de nivelare ...................Pagina 29

Indicaţii de lucru ................................................................... Pagina 29

Lucrul cu stativul ...................................................................Pagina 29

Întreţinere şi curăţare ............................................ Pagina 29

Depozitare ......................................................................Pagina 30

Înlăturare .........................................................................Pagina 30

Garanţie ............................................................................Pagina 31

20 RO

Legenda pictogramelor utilizate

Citiţi manualul de utilizare.

Pericol de explozie!

Purtaţi mânuși de protecţie!

Atenţie!

Protejaţi-vă de razele laser!

Nu priviţi niciodată în razele laser!

Laser cu linii în cruce

Introducere

Vă felicităm pentru achiziţionarea noului dumneavoastră

produs. Aţi ales un produs de înaltă calitate. Manualul de

utilizare reprezintă o parte integrantă a acestui produs.

Acesta conţine informaţii importante referitoare la siguranţă, la utili-

zare şi la eliminarea ca deşeu. Înainte de utilizarea acestui produs, fa-

miliarizaţi-vă mai întâi cu instrucţiunile de utilizare şi de siguranţă.

21 RO

Folosiţi produsul numai în modul descris şi numai în domeniile de

utilizare indicate. Predaţi toate documentele aferente în cazul în care

înstrăinaţi produsul.

Utilizare corespunzătoare

Produsul este adecvat pentru redarea și pentru veriﬁcarea liniilor

drepte și perpendiculare. Produsul este destinat exclusiv pentru utiliza-

rea în spaţii interioare. Orice altă utilizare sau modiﬁcare a produsului

este considerată necorespunzătoare scopului şi reprezintă pericole de

accidente grave. Producătorul nu îşi asumă răspunderea pentru dau-

nele rezultate din utilizarea necorespunzătoare. Nu este destinat utili-

zării în scopuri comerciale.

Descrierea componentelor

1

Tasta H (pentru pornirea/oprirea liniei orizontale)

2

Indicator de control luminos cu LED (roșu: nivelare oprit, verde:ni-

velare pornit)

3

Întrerupător BLOCARE

4

Tasta V (pentru pornirea/oprirea liniei verticale)

5

Compartiment pentru baterii

6

Filet stativ1/4”-(spate)

7

Oriﬁciu ieșire laser

8

Șurub 1/4”

Pagina se încarcă ...

Parkside PKLL 8 A1 Translation Of The Original Instructions

Parkside PKLL 8 A1 Translation Of The Original Instructions

în alte limbi

Lucrări conexe

Alte documente