Ubiquiti B-DB-AC Manual de utilizare

Dual-Band airMAX® ac Radio with

Dedicated Wi-Fi Management

Model: B-DB-AC

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Introduction

Thank you for purchasing the Ubiquiti Networks® Bullet

™

AC. This Quick Start Guide is designed to guide you through

installation and also includes warranty terms.

Package Contents

Dual-Band airMAX® ac Radio with

Dedicated Wi-Fi Management

Model: B-DB-AC

Bullet AC Compression

Seal

Quick Start Guide

Installation Requirements

• Shielded Category 5 (or above) cabling with drain wire

should be used for all outdoor wired Ethernet connections

and should be grounded through the AC ground of the PoE.

We recommend that you protect your networks from

harmful outdoor environments and destructive ESD events

with industrial‑grade, shielded Ethernet cable from Ubiquiti

Networks. For more details, visit

www.ubnt.com/toughcable

• Surge protection should be used for all outdoor installations.

We recommend that you use two Ethernet Surge Protectors,

model ETH‑SP, one near the B‑DB‑AC and the other at the

entry point to the building. The ETH‑SP will absorb power

surges and safely discharge them into the ground.

To LAN

To Antenna

ETH-SP

ES-8-150W

B-DB-AC

TERMS OF USE: Ubiquiti radio devices must be professionally

installed. Shielded Ethernet cable and earth grounding must

be used as conditions of product warranty. TOUGHCable

™

is designed for outdoor installations. It is the professional

installer’s responsibility to follow local country regulations,

including operation within legal frequency channels, output

power, and Dynamic Frequency Selection (DFS) requirements.

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Hardware Overview

Cable Gland

Body

Compression

Seal

Ethernet

Port

N-Type

Connector

LEDs

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Hardware Installation

1. Unscrew the Cable Gland Body and detach it from

the Bullet.

2. Feed the Ethernet cable through the Cable

Gland Body.

3. Slip the Compression Seal around the cable.

4. Seat the CompressionSeal into the

CableGlandBody.

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

5. Connect the Ethernet cable to the port located on

the bottom of the Bullet.

6. Securely attach the Cable Gland Body onto the

Bullet. Ensure the Compression Seal is securely

compressed and tightly sealed around the cable.

24V 1A PoE

M/N: BM5HP

RESET

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

7. Connect the Bullet to the N‑Type connector of

the antenna.

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Accessing airOS via Wi‑Fi

Verify connectivity in the airOS Configuration

Interface. There are two methods, the UNMS

™

App

and Web Portal. Both are available for 15minutes

immediately after you power on the device. If

necessary, you can power cycle the Bullet AC to

re‑enable its Wi‑Fi.

Proceed to the appropriate instructions:

UNMS App

1. Download the UNMS

app from the AppStore

(iOS) or Google Play

™

(Android).

2. Connect your device’s Wi‑Fi to the Bullet AC SSID

named: B-DB-AC:<MAC Address>

Note: Ensure that DHCP is enabled

on your Wi‑Fiadapter.

3. Launch the app.

4. Tap the Bullet AC on the Connections screen.

Bullet AC

BDBAC

192.168.172.1

:F08FC2552017

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

5. Tap Connect on the Login screen.

Bullet AC

BDBAC:F09FC25EXXXX

192.168.172.1

6. Select your Country and tap Done.

United Kingdom

Argentina

Armenia

Aruba

Australia

Austria

Azerbaijan

Bahrain

Barbados

Belarus

Note:

For the Country setting, U.S. product

versions are restricted to a choice of Canada,

Puerto Rico, or the U.S. to ensure compliance

with FCC/IC regulations.

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

7. Under Configuration, customize your settings

as needed.

Bullet AC

(Not Applicable)

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Web Portal

1. Connect your device’s Wi‑Fi connection to the

BulletAC SSID named: B-DB-AC:<MACAddress>

Note: Ensure that your Wi‑Fi

connection has DHCP enabled.

2. Launch a web browser and go to:

http://setup.ubnt.com

3. Enter ubnt in the Username and Password fields.

Select your Country and Language. You must

agree to the Terms of Use to use the product.

Click Login.

Username

Password

Select Your Country

English

Note:

For the Country setting, U.S.

product versions are restricted to a

choice of Canada, Puerto Rico, or the

U.S. to ensure compliance with

FCC/IC regulations.

The airOS Configuration Interface will appear,

allowing you to customize your settings as needed.

For additional details on the airOS Configuration

Interface, refer to the User Guide available at:

www.ubnt.com/download/airmax

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Installer Compliance Responsibility

Devices must be professionally installed and it is the

professional installer’s responsibility to make sure the

device is operated within local country regulatory

requirements.

The Output Power field is provided to the professional

installer to assist in meeting regulatory requirements.

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Specifications

Bullet AC

Dimensions 190 x 46 mm (7.48 x 1.81")

Weight 196 g (6.91 oz)

Enclosure Powder-Coated Aluminum

Networking

Interface

Gigabit Ethernet Port

Antenna Connector N-Type Connector

LEDs Power, Ethernet, (4) Signal Strength

Max. Power

Consumption

8W

Output Power 22 dBm

Power Supply AC to 24VDC, 0.5 A Gigabit PoE

Adapter

Power Method 24V Passive PoE

(Pairs 4, 5+; 7, 8 Return)

ESD/EMP Protection ± 24 kV Contact / Air

Operating Temp -40 to 70° C (-40 to 158° F)

Operating Humidity 5 to 95% Condensing

Shock and Vibration ETSI300-019-1.4

Certications

CE, FCC, IC

Operating Frequency (MHz)

Worldwide

2412 - 2472

5150 - 5875

USA

2412 - 2462

U-NII-1:

5150 - 5250

U-NII-3:

5725 - 5850

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Safety Notices

1. Read, follow, and keep these instructions.

2. Heed all warnings.

3. Only use attachments/accessories specified by

the manufacturer.

WARNING: Do not use this product in location

that can be submerged by water.

WARNING: Avoid using this product during an

electrical storm. There may be a remote risk of

electric shock from lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage,

frequency, and current requirements indicated

on the manufacturer’s label. Connection to a

different power source than those specified may

result in improper operation, damage to the

equipment or pose a fire hazard if the limitations

are not followed.

2. There are no operator serviceable parts inside this

equipment. Service should be provided only by a

qualified service technician.

Limited Warranty

UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”)

warrants that the product(s) furnished hereunder (the

“Product(s)”) shall be free from defects in material

and workmanship for a period of one (1) year from

the date of shipment by UBIQUITI NETWORKS under

normal use and operation. UBIQUITI NETWORKS’

sole and exclusive obligation and liability under the

foregoing warranty shall be for UBIQUITI NETWORKS,

at its discretion, to repair or replace any Product

that fails to conform to the above warranty during

the above warranty period. The expense of removal

and reinstallation of any Product is not included in

this warranty. The warranty period of any repaired

or replaced Product shall not extend beyond its

original term.

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

*640-00311-05*

640-00311-05

Warranty Conditions

The above warranty does not apply if the Product:

(I) has been modified and/or altered, or an

addition made thereto, except by Ubiquiti

Networks, or Ubiquiti Networks’ authorized

representatives, or as approved by Ubiquiti

Networks in writing;

(II) has been painted, rebranded or physically

modified in any way;

(III) has been damaged due to errors or defects

in cabling;

(IV) has been subjected to misuse, abuse,

negligence, abnormal physical, electromagnetic

or electrical stress, including lightning strikes,

or accident;

(V) has been damaged as a result of using third

party firmware;

(VI) has no original Ubiquiti MAC label, or is missing

any other original Ubiquiti label(s); or

(VII) has not been received by Ubiquiti within 30

days of issuance of the RMA.

In addition, the above warranty shall apply only if: the

product has been properly installed and used at all

times in accordance, and in all material respects, with

the applicable Product documentation; all Ethernet

cabling runs use CAT5 (or above), and for outdoor

installations, shielded Ethernet cabling is used, and

for indoor installations, indoor cabling requirements

are followed.

Returns

No Products will be accepted for replacement or repair

without obtaining a Return Materials Authorization

(RMA) number from UBIQUITI NETWORKS during the

warranty period, and the Products being received

at UBIQUITI NETWORKS’ facility freight prepaid

in accordance with the RMA process of UBIQUITI

NETWORKS. Products returned without an RMA

number will not be processed and will be returned

freight collect or subject to disposal. Information on

the RMA process and obtaining an RMA number can

be found at:

www.ubnt.com/support/warranty

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Disclaimer

EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED

HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS

AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE AND

HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE

NO OTHER REPRESENTATION OR WARRANTY OF ANY

KIND, EXPRESS, IMPLIED OR STATUTORY, INCLUDING,

BUT NOT LIMITED TO, REPRESENTATIONS, GUARANTEES,

OR WARRANTIES OF MERCHANTABILITY, ACCURACY,

QUALITY OF SERVICE OR RESULTS, AVAILABILITY,

SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET

ENJOYMENT, FITNESS FOR A PARTICULAR PURPOSE AND

NON‑INFRINGEMENT AND ANY WARRANTIES ARISING

FROM ANY COURSE OF DEALING, USAGE OR TRADE

PRACTICE IN CONNECTION WITH SUCH PRODUCTS

AND SERVICES. BUYER ACKNOWLEDGES THAT NEITHER

UBIQUITI NETWORKS NOR ITS THIRD PARTY PROVIDERS

CONTROL BUYER’S EQUIPMENT OR THE TRANSFER OF

DATA OVER COMMUNICATIONS FACILITIES, INCLUDING

THE INTERNET, AND THAT THE PRODUCTS AND SERVICES

MAY BE SUBJECT TO LIMITATIONS, INTERRUPTIONS,

DELAYS, CANCELLATIONS AND OTHER PROBLEMS

INHERENT IN THE USE OF COMMUNICATIONS FACILITIES.

UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR

THIRD PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY

INTERRUPTIONS, DELAYS, CANCELLATIONS, DELIVERY

FAILURES, DATA LOSS, CONTENT CORRUPTION, PACKET

LOSS, OR OTHER DAMAGE RESULTING FROM ANY OF THE

FOREGOING. In addition, UBIQUITI NETWORKS does not

warrant that the operation of the Products will be error‑

free or that operation will be uninterrupted. In no event

shall UBIQUITI NETWORKS be responsible for damages

or claims of any nature or description relating to system

performance, including coverage, buyer’s selection of

products (including the Products) for buyer’s application

and/or failure of products (including the Products) to

meet government or regulatory requirements.

Limitation of Liability

EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW,

IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES,

AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT,

SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER

DAMAGES (INCLUDING LOST PROFIT, LOST DATA,

OR DOWNTIME COSTS), ARISING OUT OF THE USE,

INABILITY TO USE, OR THE RESULTS OF USE OF THE

PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT,

TORT OR OTHER LEGAL THEORY, AND WHETHER OR NOT

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Note

Some countries, states and provinces do not allow

exclusions of implied warranties or conditions, so the

above exclusion may not apply to you. You may have

other rights that vary from country to country, state to

state, or province to province. Some countries, states

and provinces do not allow the exclusion or limitation

of liability for incidental or consequential damages,

so the above limitation may not apply to you. EXCEPT

TO THE EXTENT ALLOWED BY LOCAL LAW, THESE

WARRANTY TERMS DO NOT EXCLUDE, RESTRICT OR

MODIFY, AND ARE IN ADDITION TO, THE MANDATORY

STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF

ANY SOFTWARE (EMBEDDED IN THE PRODUCT) TO

YOU. The United Nations Convention on Contracts for

the International Sale of Goods shall not apply to any

transactions regarding the sale of the Products.

Compliance

FCC

Changes or modifications not expressly approved by

the party responsible for compliance could void the

user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions.

1. This device may not cause harmful interference,

and

2. This device must accept any interference

received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply

with the limits for a Class A digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference when the equipment is operated in a

commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the

instruction manual, may cause harmful interference to

radio communications. Operations of this equipment

in a residential area is likely to cause harmful

interference in which case the user will be required to

correct the interference at his own expense.

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

This radio transmitter (FCC: SWX‑BDBAC) has been

approved by FCC to operate with the antenna types

listed below with the maximum permissible gain and

required antenna impedance for each antenna type

indicated. Antenna types not included on

page 18, having a gain greater than the maximum

gain indicated for that type, are strictly prohibited for

use with this device.

ISED Canada

CAN ICES‑3(A)/NMB‑3(A)

This device complies with ISED Canada licence‑

exempt RSS standard(s). Operation is subject to the

following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference,

including interference that may cause undesired

operation of the device.

This radio transmitter (IC: 6545A‑BDBAC) has been

approved by ISED Canada to operate with the antenna

types listed below with the maximum permissible

gain and required antenna impedance for each

antenna type indicated. Antenna types not included

on page 18, having a gain greater than the maximum

gain indicated for that type, are strictly prohibited for

use with this device.

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

CAN ICES‑3(A)/NMB‑3(A)

Le présent appareil est conforme aux CNR d’ISDE

Canada applicables aux appareils radio exempts

de licence. L’exploitation est autorisée aux deux

conditions suivantes :

1. l’appareil ne doit pas produire de brouillage;

2. l’appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage

est susceptible d’en compromettre le

fonctionnement.

Le présent émetteur radio (IC: 6545A‑BDBAC) a

été approuvé par ISDE Canada pour l’exploitation

avec l’antenne types énumérés ci‑dessous avec le

gain maximal admissible et requis l’impédance de

l’antenne pour chaque type d’antenne indiqué. Types

d’antenne non inclus dans cette liste, ayant un gain

supérieur au gain maximal indiqué pour ce type,

sont strictement interdits pour une utilisation avec

cet appareil.

Ceritifed Antenna Types (Types d’antennes certifiées)

Antenna Frequency Gain

Omni 2.4 GHz

5 GHz

13 dBi

Sector 2.4 GHz

5 GHz

17 dBi

22 dBi

Dish 2.4 GHz

5 GHz

24 dBi

34 dBi

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

RF Exposure Warning

The antennas used for this transmitter must be

installed to provide a separation distance of at least

20 cm from all persons and must not be located or

operating in conjunction with any other antenna or

transmitter.

Les antennes utilisées pour ce transmetteur

doivent être installé en considérant une distance de

séparation de toute personnes d’au moins 20 cm et ne

doivent pas être localisé ou utilisé en conflit avec tout

autre antenne ou transmetteur.

Australia and New Zealand

Warning: This is a Class A product. In a

domestic environment this product may cause

radio interference in which case the user may

be required to take adequate measures.

CE Marking

CE marking on this product represents the product is

in compliance with all directives that are applicable

to it.

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

CE RF Exposure Warning

This device meets the EU requirements (2014/53/EU

Article 3.1a) on the limitation of exposure of the general

public to electromagnetic fields by way of health

protection. The device complies with RF specifications

when the device is used at 29 cm from your body.

Country List

AT BE BG CY CZ DE DK EE EL ES FI FR HR HU

IE IT LV LT LU MT NL PL PT RO SE SI SK UK

BFWA (Broadband Fixed Wireless Access) members noted in blue

Note: This device meets Max. TX power limit per

ETSI regulations.

The following apply to products that operate in the

5 GHz frequency range:

Note: This device is restricted to indoor use only

when operating in the 5150 ‑ 5350 MHz frequency

range within all member states.

Note: All countries listed may operate at 30 dBm.

BFWA member states may operate at 36 dBm.

Note: Operation in the 5.8 GHz frequency band is

prohibited in BFWA member states. Other countries

listed may use the 5.8 GHz frequency band.

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Pagina se încarcă ...

Ubiquiti B-DB-AC Manual de utilizare

Acest manual este potrivit și pentru

Ubiquiti B-DB-AC Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente