Silvercrest SMS 5.0 A1 Manual de utilizare

V 2.0

English ...................................................................................................... 2

Hrvatski ................................................................................................. 29

Română ................................................................................................. 56

Български .............................................................................................. 83

Ελληνικά .............................................................................................. 110

Deutsch ................................................................................................ 137

SilverCrest SMS 5.0 A1

2 - English

Contents

Trademarks ........................................................................................................ 3

Introduction ........................................................................................................ 3

Intended use ...................................................................................................... 3

Supplied items .................................................................................................... 4

Technical data .................................................................................................... 6

Safety instructions .............................................................................................. 7

Copyright ........................................................................................................... 9

Overview ......................................................................................................... 10

Prior to use ....................................................................................................... 12

First use ............................................................................................................ 12

Inserting memory card ....................................................................................................................... 12

Switching the device on and off ........................................................................................................ 12

Inserting slides .................................................................................................................................... 13

Inserting negatives ............................................................................................................................. 14

Inserting photos .................................................................................................................................. 15

Inserting business cards ..................................................................................................................... 16

Main menu ......................................................................................................................................... 17

Selecting recording source ................................................................................................................ 17

Recording ............................................................................................................................................ 17

Flipping ........................................................................................................................................... 18

Adjusting brightness ....................................................................................................................... 18

Adjusting colour ............................................................................................................................. 19

Recording and saving .................................................................................................................... 19

Memory full .................................................................................................................................... 20

Memory card protected ................................................................................................................. 20

Playback ............................................................................................................................................. 21

USB mode ........................................................................................................................................... 22

Formatting the memory card ............................................................................................................. 23

TV-out .................................................................................................................................................. 24

Storage when not in use .................................................................................................................... 25

Troubleshooting ............................................................................................... 25

Environmental and disposal information .......................................................... 26

Conformity information .................................................................................... 26

Warranty and servicing advice ........................................................................ 27

SilverCrest SMS 5.0 A1

English - 3

Trademarks

Microsoft Windows is a registered trademark of Microsoft Corporation, USA.

SD and SDHC are registered trademarks.

USB is a registered trademark.

Other names and products may be the trademarks or registered trademarks of their respective

owners.

Introduction

Thank you for purchasing a SilverCrest product.

Intended use

The SilverCrest SMS 5.0 A1 multi scanner is an information technology device and is not designed

for commercial use or operation in a company. It can be used to digitize slides, negatives, paper

photos and business cards. This device may only be used for private purposes, and any other use is

not as intended. Furthermore, the device may not be used outdoors or in tropical climates. This

device meets the requirements of all relevant norms and standards in conjunction with the

Declaration of Conformity. In the event of any modification to the device that was not approved by

the manufacturer, compliance with these standards is no longer guaranteed. The manufacturer does

not accept any liability for any resulting damage or faults in such cases.

Please observe the regulations and laws in the country of use.

SilverCrest SMS 5.0 A1

4 - English

Supplied items

Take the device and all accessories from the packaging. Remove all packaging material and check

that all parts are complete and undamaged. In the event of an incomplete or damaged delivery,

please contact the manufacturer.

SilverCrest SMS 5.0 A1 multi scanner Power supply adapter

128MB SD card USB cable

Video cable Photo/business card holder

SilverCrest SMS 5.0 A1

English - 5

Business card fixing Negative holder

Slide holder Backlight

rail





Cleaning brush

(for slides and negatives)

Operating instructions

(symbolic representation)

SilverCrest SMS 5.0 A1

6 - English

Technical data

Image sensor 5-megapixel CMOS sensor

Screen approx. 6 cm (2.4 inch) TFT LCD colour display

External memory SD/SDHC (up to 32GB)

Scan method single pass

Scanner resolution 1800 dpi

Exposure control 7 levels

Colour setting 7 levels

Light source negatives/slides: 3 white LEDs

photos/business cards: 8 white LEDs

Colour depth 24-bit

Connections composite TV-out (3.5 mm jack)

USB 2.0 (USB mass storage)

Power supply

Operating temperature 5 °C to 35 °C

Storage temperature -10 °C to 50 °C

Operating air humidity max. 85 % rel. air humidity

Dimensions (W x H x D) approx. 190 x 205 x 165 mm

Weight approx. 900 g

Power supply 5V , 1.0A

Power consumption in standby mode

approx. 0.6W (multi scanner with power supply

adapter)

approx. 0.2W (only power supply adapter)

Power supply adapter manufacturer: Taiytech

type designation: TYTM0500100EU

input: 100-240V

~

50/60Hz, 0.18A

output: 5V 1A

System requirements - PC with a free USB 2.0 port

- Microsoft

®

Windows

®

XP, Windows Vista

®

or

Windows

®

7/8

The technical data and design may be changed without notification.

SilverCrest SMS 5.0 A1

English - 7

Safety instructions

Before using this device for the first time, always read the following instructions and pay attention to

all warnings, even if you are familiar with handling electronic devices. Store these operating

instructions in a safe place for future reference. If you sell the device or pass it on, always include

these operating instructions. They are an integral part of the device.

DANGER! This symbol in conjunction with the "danger" note indicates an

imminent dangerous situation which, if not prevented, could result in serious

injury or even death.

WARNING! This symbol in conjunction with the "warning" note indicates

important information for safe operation of the device and the safety of the

user.

This symbol indicates an imminent risk of an electric shock.

This symbol indicates other important information on the topic.

Only use the supplied power supply adapter (manufacturer: Taiytech /type

designation TYTM0500100EU) to connect to the multi scanner.

DANGER! Ensure that

 no direct heat sources (e.g. heating) can affect the device

 no direct sunlight or bright artificial light reaches the device

 contact with sprayed and dripping water and corrosive liquids is prevented and the device is

never operated near water; in particular it should never be immersed (do not place any objects

filled with liquids such as vases or drinks on or near the device)

 the device is not in the immediate vicinity of magnetic fields (e.g. speakers)

 no fire sources (e.g. burning candles) are placed on or near the device

 no foreign objects penetrate the device

 the device is not subjected to any extreme temperature fluctuations, as this could result in

condensation and electrical short circuits. If the device was subjected to extreme temperature

SilverCrest SMS 5.0 A1

8 - English

fluctuations, however, wait (approx. 2 hours) until the device has reached ambient temperature

before use

 the device is never subjected to excessive shocks and vibrations

If the aforementioned instructions are not adhered to, it poses a risk to your health or the device

could be damaged.

DANGER! Children and persons with disabilities

Electrical devices do not belong in the hands of children. Persons with disabilities should also only

use electrical devices within the scope of their abilities. Never allow children or persons with

disabilities to use electrical devices unsupervised. Unless they have been instructed accordingly or

are supervised by a person responsible for their safety. Children should always be supervised to

ensure that they do not play with this device. Small parts can be fatal if swallowed. Also always

keep plastic packaging out of reach.

It poses a suffocation risk.

DANGER! Power supply adapter

Only insert the power supply adapter in a suitable mains socket that is always easily accessible.

Never touch the power supply adapter with wet hands. It poses an electric shock risk. Always

disconnect the power supply adapter from the mains in the following situations:

 If there is a hazardous situation.

 If there are any unusual sounds or if smoke is emitted from the power supply adapter.

 Before stormy weather, when there is the risk of lightning;

 The power supply adapter was damaged.

 If the power supply was exposed to rain, liquids or extreme moisture.

 If you want to clean it.

 The power supply adapter consumes power even in standby mode, thus it must be removed from

the mains socket to be completely disconnected from the mains.

Pay attention to these instructions to avoid a risk of fatal injury or fire! The power supply adapter

also may never be blocked because there is a risk of fire. Never try to open the housing of the

power supply adapter. There is a risk of a fatal electric shock.

SilverCrest SMS 5.0 A1

English - 9

DANGER! Cables

Always handle the cables by the connector and do not pull on the cables themselves. Never place

furniture or other heavy objects on the cables and take care that the cables are not kinked,

especially near the plug and connection sockets. Do not connect the cables over hot or sharp

points and edges to prevent damage. Never make knots in any of the cables or tie them together

with other cables. Ensure that all cables are placed so that no one can trip over them and they do

not cause an obstruction.

Operating environment

The device is not designed for use in environments with high humidity (e.g. bathrooms) or in

extremely dusty conditions. Operating temperatures and operating air humidity: 5 °C to 35 °C,

max. 85 % rel. air humidity.

WARNING! Cleaning / maintenance

It is necessary to repair the device if it has been damaged in any way, for example, if the power

supply adapter or housing is damaged, if liquid or objects have penetrated the device or if the

product has been exposed to rain or moisture. Repair work is also required if the device is not

working properly or has been dropped. If smoke is produced, or there are any unusual sounds or

smells, the device must be switched off immediately and the power supply adapter must be

removed from the mains socket. In these cases, the device should not be used until it has been

inspected by authorised service personnel. Only have the device repaired by qualified personnel.

Never open the housing of the device. Only use a clean, dry cloth for cleaning and never use any

corrosive liquids. Never try to open the housing of the device as this would void your warranty.

Copyright

All information contained in these instructions is subject to copyright and is provided for information

purposes only. It is only permitted to copy or duplicate data and information with the express and

written consent of the author. This also includes commercial use of the content and data. The text

and illustrations are based on the state of the art at the time of printing. Subject to change without

notice.

SilverCrest SMS 5.0 A1

10 - English

Overview

An additional illustration of the controls with the relevant reference numbers can be found on the

fold-out inside cover of these operating instructions. You can leave this cover page folded out while

reading further sections of these operating operations. Thus you always keep a reference to the

relevant control in sight.

SilverCrest SMS 5.0 A1

English - 11

1 Power button

2 Status LED

3 OK/Capture button

4 Mode button

5 Playback button

6 Memory card slot

7 Negative/slide slot

8 Screen

9 Photo/business card slot

10 Backlight slot

11 Power supply connection

12 USB 2.0 port (USB mass storage)

13 TV-out port (3.5 mm jack)

14 Right/Colour (to operate the menu or change the parameters)

15 Down/Flip (to operate the menu or change the parameters)

16 Left/EV (to operate the menu or change the parameters)

17 Up/Mirror (to operate the menu or change the parameters)

SilverCrest SMS 5.0 A1

12 - English

Prior to use

 Remove all protective foil from the device and accessories.

 Connect the plug of the supplied power supply adapter to the power supply connection [11] on

the rear of the multi scanner.

 Insert the power supply adapter in a mains socket that is always easily accessible.

WARNING! When laying the cable, make sure that nobody can trip over it.

First use

Inserting memory card

WARNING! Switch the device off before you insert or remove a memory

card.

You must insert a memory card to be able to save pictures. Proceed as follows:

Slide the memory card with the contacts upwards and pointing towards the multi scanner into the

memory card slot [6] until it snaps into place. To remove the memory card, press it lightly. The

memory card is ejected slightly and can be pulled out.

Switching the device on and off

To switch on the device, press the Power button [1] once briefly. The status LED [2] lights up blue

when the device is switched on. During the scanning process, the status LED [2] lights up red.

To switch off the device, press the Power button [1] again briefly.

SilverCrest SMS 5.0 A1

English - 13

Inserting slides

 Open the slide holder at the point marked "OPEN". Place up to four framed slides in the device

as shown in the following image. Make sure that the slides are not inserted the wrong way

around or upside down.

 Close the slide holder.

 Insert the backlight rail, with the reflective surface facing upwards, in the backlight slot [10] until it

noticeably snaps into place.

 Insert the slide holder, with the inscription facing upwards, in the direction of the arrow in the

negative/slide slot [7]. Insert the slide holder in until it noticeably snaps into place in the first

position. For more slides, insert the slide holder in further until it noticeably snaps into place in the

next position.

 To record the slides, please read the section "Recording" from page 17.

 Remove the backlight rail and the slide holder after you have recorded your slides. You remove

the backlight rail by pressing it down lightly on the protruding point and pulling it out.

SilverCrest SMS 5.0 A1

14 - English

Inserting negatives

 Open the negative holder at the point marked "OPEN". Then place the negatives in the device as

shown in the following image. Make sure that the negatives are not inserted the wrong way

around or upside down. In this case, you can refer to the numbering on the negative strip. The

perforations of the film strip must engage in the corresponding retaining pins in the negative

holder.

 Close the negative holder.

 Insert the backlight rail, with the reflective surface facing upwards, in the backlight slot [10] until it

noticeably snaps into place.

 Insert the negative holder, with the inscription facing upwards, in the direction of the arrow in the

negative/slide slot [7]. Insert the negative holder in until it noticeably snaps into place in the first

position. For more negatives, insert the negative holder in further until it noticeably snaps into

place in the next position.

 To record the negatives, please read the section "Recording" from page 17.

 Remove the backlight rail and the negative holder after you have recorded your negatives. You

remove the backlight rail by pressing it down lightly on the protruding point and pulling it out.

SilverCrest SMS 5.0 A1

English - 15

Inserting photos

 Open the photo/business card holder at the point marked "OPEN". Then place a 10 x 15 photo

in the device as shown in the following image.

 Close the photo/business card holder.

 Remove the backlight rail, if it is still inserted, by pressing it down lightly on the protruding point

and pulling it out.

 Insert the photo/business card holder, with the photo upwards, in the photo/business card slot

[9]. Insert the photo/business card holder as far as possible.

 To scan the photos, please read the section "Recording" from page 17.

 Remove the photo/business card holder after you have scanned your photos.

SilverCrest SMS 5.0 A1

16 - English

If you want to scan smaller photos, e.g. 7 x10cm or 9 x 13cm, use the business

card fixing to ensure that the photo is lying flat in the photo/business card

holder.

Inserting business cards

 Remove the protective foil from the business card fixing.

 Then place a business card in the device and place the business card fixing on the business card

as shown in the following image.

 Remove the backlight rail, if it is still inserted, by pressing it down lightly on the protruding point

and pulling it out.

 Insert the photo/business card holder, with the business card upwards, in the photo/business

card slot [9]. Insert the photo/business card holder as far as possible.

 To scan the business cards, please read the section "Recording" from page 17.

 Remove the photo/business card holder after you have scanned your business cards.

SilverCrest SMS 5.0 A1

English - 17

Main menu

After you have read the safety instructions and have connected the device as described, switch on

the device. Now press the Mode button [4] to access the main menu. You navigate within the menu

via the keys Right/Colour [14], Down/Flip [15], Left/ EV [16] and Up/Mirror [17]. Press the

OK/Capture button [3] to confirm the selection. To exit the menu, press the Mode button [4] again.

The following options are available in the main menu:

20 Select recording source

21 Format memory card

22 TV

23 USB mode

24 Energy-saving mode (automatic switch-off

after approx. 3 minutes)

Selecting recording source

After you have inserted your slides, negatives, photos or business cards in the device as described,

select the recording source. The following options are available:

25 Negatives (colour)

26 Slides

27 Negatives (black & white)

28 Photos

29 Business cards

Recording

After you have selected a recording source, a preview of the inserted image is displayed on the

screen [8]. You can recognise the recording mode by the flashing red dot in the upper left corner.

You can now flip the image horizontally or vertically and adjust the brightness and colours before

recording.

SilverCrest SMS 5.0 A1

18 - English

Flipping

Press the Up/Mirror button [17] to flip the image horizontally.

Horizontal

flipping

Press the Down/Flip button [15] to flip the image vertically.

Vertical

flipping

Adjusting brightness

Press the Left/EV [16] button to adjust the brightness. A lamp symbol then appears on the screen

[8].

You can now adjust the brightness in the range

from +3 (bright) to -3 (dark) with the keys

Up/Mirror [17] and Down/Flip [15]. At the

same time, the current value appears in the

lamp symbol. To apply the current value, press

the Mode button [4].

Pagina se încarcă...

Silvercrest SMS 5.0 A1 Manual de utilizare

Silvercrest SMS 5.0 A1 Manual de utilizare

Lucrări înrudite

Alte documente