EN MY4836- User manual
1
Product Features
1.Measure Weight, Body Fat, Hydration, Visceral Fat, Muscle Mass, Bone Mass,
Calories , BMI and so on.
2.Records data to App allowing for you to check progress and maintain goals.
Dear users:
Thank you for choosing our Smart Body Analysis Scale.
This product is designed by your body relationship, to monitor the fat, water, muscle,
bone, BMI, visceral fat and so on. The product use 2.4G HZ wireless transmission protocol, can
connect Bluetooth from mobile or tablet to transmit data.
In order to ensure the accuracy of measurement data and service life, please read the
instructions carefully before use and keep it safely for future reference.
More Details
·Weighting scope/dividing value:5kg-180kg/0.1kg, division compensation:0.05kg
·Battery:4XAAA battery
·Three units: kg/st/lb
·The battery voltage is less than 2.4V,shows “Lo”,15seconds after auto power-off
·Overload display “oL”, Over Value:182.5kg
How to Ensure Accurate Readings
·Always measure barefoot. Do not step on the scale with wet feet, wearing socks or shoes to
prevent slipping, damage and inaccurate readings.
·Recommended to be placed on hard and flat surface only.
·Always weigh yourself on the same scale, same place and same surface if possible.
·Recommended measurement time should be after waking up but before the breakfast, and next
weight should be two hours after your meal but before your next meal, or two hours after dinner
but before bed.
·Erroneous measurements can occur if feet are dirty, dry or extremely callous.
·Body fat percentage estimates will vary with the amount of water in the body, and can be
affected by dehydration or over-hydration due to such factors as alcohol consumption,
menstruation, illness, intense exercise.
·Stand upright and not to the edge of the scale to ensure good contact with the film or
electrodes (the film and electrodes both are conductive media depending scale models).
·Horizontal line should be running below arch of each foot.
·Full feature of scale only available with corresponding app.
Maintenance
1.Keep scale surface dry to avoid accident by slipping..
2.Please put the scale in a dry place to protect the internal electronic components.