Beko TBN 81808 BX Manual de utilizare

01M-8910773200/8911323200-1121-01

EN / FR / IT / PL / SL / CS / SRB / SQ / MK / RO / AR

TBN 81808 BX

User Manual

Table Blender

CONTENTS

ENGLISH 03-16

FRANÇAIS 17-31

ITALIANO 32-47

POLSKI 48-63

SLOVENŠČINA 64-77

CZECH 78-91

 92-105

SHQIPTARE 106-119

 120-137

ROMÂNĂ 138-155

ARABIC 156-169

Please read this guide first!

Dear Customer,

Thank you for choosing a BEKO product. We would like you to achieve the

optimal efficiency from this high quality product which has been manufac-

tured with state of art technology. Please make sure you read and understand

this guide and supplementary documentation fully before use and keep it as

a reference. Include this guide with the unit if you hand it over to someone

else. Observe all warnings and information herein and follow the instructions.

Symbols and their meanings

These symbols are used throughout this guide:

CImportant information and

recommendations regarding the use

of the appliance.

AWarnings on personal injury or property

damage.

Suitable for contact with food.

Do not immerse the appliance, the pow-

er cord or the plug in water or in any

other liquids.

Electric shock protection rating

This product has been manufactured at environment-friendly modern facilities without harming nature.

4 / EN Table Blender / User Manual

1 Important safety and environmental

instructions

This section contains safety instructions to prevent

hazards that can result in injury or property damage.

Any warranty is void if these instructions are not

followed.

1.1 General safety

•

This appliance complies with international safety

standards.

•

Appliance may be used by persons with limited

physical, perceptual or mental abilities or persons

with a lack of experience and knowledge if they are

supervised or given instructions on the operation

of the appliance and any relevant risks they may

be encountered. Children should not tamper with

the device.

•

Do not use the appliance if the power cord, the

appliance or the appliance blade is damaged.

Contact authorized service.

•

Use only original parts or parts recommended by

the manufacturer.

•

Do not disassemble the appliance.

5 / EN

Table Blender / User Manual

1 Important safety and environmental

instructions

•

Do not operate the appliance or its components

over or near hot surfaces or do not put on such

surfaces.

•

Do not use the appliance for hot meals.

•

For security reasons, the product would not operate

in case you leave the lid open.

•

Your mains power supply shall be in align with the

specified information on the type tag.

•

Do not use the appliance with an extension cord.

•

Do not touch the plug of the appliance while your

hands are damp or wet.

•

Do not unplug the appliance by pulling on the cord.

•

Prior to cleaning, removal, accessory mounting,

unplug the appliance and wait for it to stop

completely.

•

Serious injury may result from misuse when

emptying the container, during cleaning and when

touching the chopping blade with bare hands.

Handle the chopping blade carefully, trying to hold

it only by its plastic part.

6 / EN Table Blender / User Manual

1 Important safety and environmental

instructions

•

Never touch the blades while using the appliance.

There is a risk of injury due to improper usage.

•

After cleaning, prior to energizing or assembling the

parts, dry the appliance and all of its parts.

•

Do not immerse the appliance, the power cord or

the plug in water or in any other liquids.

•

If you keep the packaging materials, keep them out

of the reach of children.

•

Children must not use the device. Store the

appliance and its electrical cord out of the reach

of children.

•

Always use the appliance on a stable, flat, clean

and dry surface.

•

This appliance is intended to be used in household

and similar applications such as:

- staff kitchen areas in shops, offices and other

working environments,

- farm houses, by clients in hotels, motels and other

residential type environments,

- bed and breakfast type environments

•

Do not squeeze or bend the power cord and do

7 / EN

Table Blender / User Manual

1 Important safety and environmental

instructions

not rub in on sharp edges in order to prevent any

damage. Keep the cord away from hot surfaces and

open flames.

•

Before using the appliance for the first time, clean

all parts carefully which come into contact with

food. Please see full details in the “Cleaning ”

section.

•

Do not touch any moving parts of the appliance.

Do not attach or remove the parts until the device

comes to a complete stop.

1.2 Compliance with the WEEE Regulations and Waste

Disposal

This product complies with EU WEEE Directive (2012/19/EU). This product

bears a classification symbol for waste electrical and electronic equipment

(WEEE).

This symbol indicates that this product shall not be disposed

with other household wastes at the end of its service life. Used

device must be returned to offical collection point for recycling

of electrical and electronic devices. To find these collection

systems please contact to your local authorities or retailer

where the product was puchased. Each household performs important

role in recovering and recycling of old appliance. Appropriate disposal of

used appliance helps prevent potential negative consequences for the

environment and human health.

8 / EN Table Blender / User Manual

1 Important safety and environmental

instructions

1.3 Packaging information

The product’s packaging is made of recyclable materials, in

accordance with the National Legislation. Do not dispose the

packaging waste with the household waste or other wastes,

dispose it to the packaging collection areas specified by local

authorities.

1.4 What to do for energy saving

Before adding solid food to the appliance, cut them into small pieces

as indicated in the manual. Follow the other instructions and durations

specified in the manual. If it is applicable for the food to be prepared,

select lower speed levels. Turn off and unplug the appliance after use.

2.1 Overview

2 Your Blender

The values provided with the appliance or its accompanying documents are laboratory readings in accordance

with the respective standards. These values may differ depending on the use and ambient conditions.

1

2

3

4

5

6

7

8

9

10 / EN Table Blender / User Manual

1. Measuring cap

2. Lid

3. Glass container

4. Chopping blade

5. Silicone Ring

6. Motor unit

7. Speed adjustment button

8. Non-slip base

9. Cable wrap (under the appliance)

Technical data

Voltage: 220-240 V~, 50-60 Hz

Power: 800 W

Insulation class: II

The rights to make technical and design changes are reserved.

2 Your Blender

11 / EN

Table Blender / User Manual

3 Operation

3.1 Intended use

The appliance is intended for home use only, it is not suitable for

professional use.

The appliance is designed to chop small solid foods (e.g. onion, potato,

carrot) and fruits (e.g. Strawberries, banana).

3.2 First operation

Clean the parts of the appliance before the first use (see 3.1.)

3.3 Start Up

23

1

Place the appliance on a

fixed and level surface.

To remove the glass contain-

er (3) from the motor unit (6),

turn it to the “ ” symbol and

take it out. Place the glass

container (3) to a level sur-

face and turn and lift the lid

(2) clockwise to open.

Place the ingredients you

would like to prepare in

the glass container (3) and

close the lid (2).

A

WARNING:

•Do not operate the appliance empty or without a lid.

•Do not touch the blades with bare hands.

•For security reasons, the product would not operate in

case you leave the lid open.

12 / EN Table Blender / User Manual

•In your fruit milk mixes (strawberry, banana, etc.), fill the milk

up to a maximum of 1000 ml. Otherwise, overflows or leaks may occur

during the process.

•Do not shred dried fruits such as almonds and hazelnuts with

the device.

•You can process food at a maximum temperature of 40°C in

the appliance.

•Do not insert any objects into the glass container (3) while the

appliance is operating.

•Use the measuring cap (1) port to add material to the glass

container during the mixing process.

WARNING: Do not remove the material from the glass

container (3) before the chopping blade (4) stops completely.

1

2

Place the glass container (3)

to motor unit (6) upright, turn

it to the “ ” symbol to lock it

in its place.

Plug the appliance to the

socket and start operating by

selecting the speed level (7).

When mixing is complete,

turn the speed adjustment

knob (7) to the “0” position

and remove the plug from

the socket.

3 Operation

13 / EN

Table Blender / User Manual

3 Operation

3.4 Crushing ice

WARNINGS:

•Add water to the glass container (3) to break ice in the

appliance.

•To process crushed ice, we recommend adding three

quarters of ice and 15 ml of cold drinking water to the container.

After adding 15 ml of water

into the glass container (3),

add 3/4 ice.

Plug the appliance to the

socket and start operating by

selecting the speed level (7).

To add more ice during op-

eration, open the meas-

uring cap (1) and add ice

cubes.

2

1

3

When mixing is complete,

turn the speed adjustment

knob (7) to the “0” position

and remove the plug from

the socket.

To remove the glass contain-

er (3) from the motor unit (6),

turn it to the “ ” symbol and

take it out. Place the con-

tainer (3) to a level surface

and turn and lift the lid (2)

clockwise to open.

14 / EN Table Blender / User Manual

3 Operation

3.5 “P” position

The process of 1-2 seconds operation in the position "P" on the speed

adjustment button (7) is called "PULSE".

For high speed mixing with short strokes, keep the speed adjustment knob

(7) in the "P" position. When you release the button, the speed adjustment

knob (7) automatically returns to the "OFF" position and the device starts

to stop.

3.6 Tips for blending

1. To add ice cubes to the mixes while the blender is running, dispose of

one ice cube at a time by removing the measuring cap (1). To make the

blender mix the ice properly, wait for a few seconds before adding the

next ice cube.

2. To add more food, remove the measuring cap (1) and insert the

ingredients through the hole. Make sure the food is cut to a size of 2-5

cm to fit through the hole. Put back the cap (1) when you have finished

adding ingredients.

3. While blending solid food like raw vegetables, cooked or raw meat, and

fruits, always cut these materials into pieces of 2-5 cm length before

putting them in the glass container (3). Do not put more than 2 units

of such food at once in the blender. This will speed up the blending

process and reduce the abrasion on the blender blades (8).

4. Unless otherwise described in the recipe, always add the liquid

ingredient in the glass container (3) first.

5. To blend a drink, put all ingredients in the glass container (3) at once.

6. Avoid over-blending. It is usually enough to blend for a few seconds.

7. Over-blending turns food into mush.

15 / EN

Table Blender / User Manual

4 Cleaning and maintenance

4.1 Cleaning

WARNINGS:

•Never use gasoline, solvents, abrasive cleaners, metal

objects, or hard brushes to clean the appliance.

•Be careful when cleaning the chopping blades unit.

The chopping blade (9) is sharp. Try not to hold it from the

blade side and do not immerse it in water.

•Never clean the blades with bare hands.

•Clean the table blender after each use. Do not let any

residual food dry on or in the blender. It will be harder to clean

it if you do so.

•Do not use boiling water. The bearings of the blade

assembly have a life-long lasting lubrication feature. Using

boiling water damages these bearings and shortens the

lifetime of the blender.

2

1

x2

2

3

1

Turn the appliance off and

unplug it. Wait for the appli-

ance to cool down.

Remove the glass container

(3) from the motor unit (6).

Rinse with water to clean up

large food residues that can

pile up in the container.

Place the glass container (3)

in its place. Add warm water

and 1 to 1 ½ unit of liquid

detergent and operate the

blender in high speed for a

few seconds.

16 / EN Table Blender / User Manual

4 Cleaning and maintenance

You can wash the glass container (3) and lids in the dish washer.

1

3

2

x2

Unplug the appliance. Remove

the glass container (3) from

the motor unit (6) and rinse

it with water. If necessary,

repeat the same steps.

Use a soft and damp cloth

and a mild amount of

cleaning agent to clean the

motor unit (6).

4.2 Storage

•If you do not intend to use the appliance for a long time, store it carefully.

•Unplug the appliance before storing.

•Store the appliance in a cool dry place.

•Store the appliance and its cord out of the reach of children.

4.3 Transport and shipping

•During transport and shipping, carry the appliance with its original

packaging. The packaging of the appliance will protect the appliance

against physical damage.

•Do not put heavy objects on the appliance or its packaging. Otherwise

the appliance may be damaged.

•If the appliance is dropped, the appliance may not operate or permanent

damage may occur.

Veuillez d’abord lire ce manuel !

Cher client(e),

Merci d’avoir choisi un produit Beko. Nous aimerions que vous obteniez une

efficacité optimale de ce produit de haute qualité qui a été fabriqué avec une

technologie de pointe. Assurez-vous d’avoir bien lu et compris ce guide et la

documentation complémentaire avant de les utiliser et conservez-les comme

référence. Joignez ce guide à l'unité si vous le remettez à quelqu'un d'autre.

Respectez tous les avertissements et informations contenues dans le présent

document et suivez les instructions.

Symboles et leurs significations

Ces symboles sont utilisés tout au long de ce guide :

CInformations et recommandations

importantes concernant l’utilisation

de l’appareil.

AAvertissements sur les dommages

corporels ou matériels.

Convient pour le contact avec les denrées

alimentaires.

Ne plongez jamais l'appareil, le câble

d'alimentation ou la fiche dans de l'eau

ou dans tout autre liquide.

Indice de protection contre les chocs

électriques

Cet appareil a été fabriqué dans des installations modernes respectueuses de l’environnement sans

nuire à la nature.

18 / FR Mixeur de table / Manuel d’utilisation

1 Instructions importantes en matière de

sécurité et d’environnement

Cette section contient des instructions de sécurité

visant à prévenir les dangers qui peuvent entraîner

des blessures ou des dommages matériels.

Toute garantie est nulle si ces instructions ne sont

pas suivies.

1.1 Sécurité générale

•

Cet appareil est conforme aux normes

internationales de sécurité.

•

Cet appareil ne peut être utilisé par des personnes

ayant des capacités physiques, perceptuelles

ou mentales limitées ou par des personnes dont

l’expérience et les connaissances sont insuffisantes

que si elles sont surveillées ou si des instructions

leur sont données sur fonctionnement de l’appareil

et les risques qui peuvent en résulter. Les enfants

ne doivent pas jouer avec l'appareil.

•

N’utilisez pas l’appareil si le cordon d’alimentation

ou la lame de l’appareil est endommagé(e).

Contactez un centre de service agréé.

•

Utilisez uniquement les pièces d’origine ou celles

recommandées par le fabricant.

19 / FR

Mixeur de table / Manuel d’utilisation

1 Instructions importantes en matière de

sécurité et d’environnement

•

Ne démontez pas l’appareil.

•

N’utilisez pas l'appareil ni ses composants sur une

surface chaude ou à proximité, et ne les déposez

pas sur une telle surface.

•

N’utilisez pas l’appareil pour des plats chauds.

•

Pour des raisons de sécurité, l’appareil ne

fonctionnera pas si vous laissez le couvercle ouvert.

•

Votre alimentation secteur doit être conforme aux

informations spécifiées sur la plaque signalétique.

•

N’utilisez pas l’appareil avec une rallonge.

•

Ne touchez pas la fiche de l’appareil lorsque vos

mains sont humides ou mouillées.

•

Ne débranchez pas l’appareil en tirant sur le cordon

électrique.

•

Avant de procéder au nettoyage, au retrait ou au

montage d’accessoires, débranchez l’appareil et

attendez qu’il s’arrête complètement.

•

Pendant l’utilisation du récipient, durant le

nettoyage ou lorsque vous touchez à mains nues

la lame de hachage, la mauvaise utilisation peut

entraîner de graves blessures. Manipulez avec

20 / FR Mixeur de table / Manuel d’utilisation

1 Instructions importantes en matière de

sécurité et d’environnement

précaution la lame de hachage, et tâchez de la tenir

sur sa partie en plastique.

•

Ne touchez jamais les lames pendant l’utilisation

de l’appareil. Une mauvaise utilisation peut causer

un risque de blessure.

•

Après le nettoyage, avant de mettre l’appareil sous

tension ou d’assembler les pièces, séchez l’appareil

et toutes ses pièces.

•

Ne plongez jamais l'appareil, le câble d'alimentation

ou la fiche dans de l'eau ou dans tout autre liquide.

•

Si vous conservez les matériaux d’emballage,

gardez-les hors de portée des enfants.

•

Les enfants ne doivent pas utiliser l’appareil.

Rangez l'appareil et son cordon hors de la portée

des enfants.

•

Utilisez toujours l’appareil sur une surface stable,

plane, propre et sèche.

•

Cet appareil est conçu pour être utilisé dans les

maisons et les endroits similaires tels que :

Pagina se încarcă ...

Beko TBN 81808 BX Manual de utilizare

Beko TBN 81808 BX Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente