Panasonic ER-GC71 AC Rechargeable Hair Clipper Manual de utilizare

Tip
Manual de utilizare
Operating Instructions
(Household use) AC/Rechargeable Hair Clipper
Model No. ER-GC71/ER-GC63/ER-GC53
PB017706 - ER-GC63 53
������
_(00COVER)_04-01-19.indd 1
2019/4/1 17:24:05
3
Português
125
Česky
247
Deutsch
21
Svenska
145
Slovensky
267
Français
43
Dansk
165
Magyar
287
Italiano
63
Norsk
185
Română
309
Español
83
Suomi
205
Türkçe
329
Nederlands
105
Polski
225
2
PB017706 - ER-GC63 53
_(00COVER)_04-01-19.indd 2
2019/4/1 17:24:06
Operating Instructions
(Household use) AC/Rechargeable Hair Clipper
Model No. ER-GC71/ER-GC63/ER-GC53
Contents
Safety precautions .................... 6
Important information ......................... 9
Parts identification ............................... 10
Preparation. ....................................... 11
Using the clipper ................................ 12
Maintenance ....................................... 15
Troubleshooting ................................ 17
Blade life ............................................ 18
Battery life .......................................... 18
Removing the built-in
rechargeable battery ......................... 18
Specifications ........................................19
Thank you for purchasing this Panasonic product.
Before operating this unit, please read these instructions completely and save them for future use.
3
PB017706 - ER-GC63 53
������
_(01GB)_04-25-19.indd 3
2019/4/25 15:04:00
English
Warning
This appliance can be used by children aged from
8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision.
The supply cord cannot be replaced. If the cord is
damaged, the AC adaptor should be scrapped.
The following symbol means suitable for cleaning under
an open water tap.
4
PB017706 - ER-GC63 53
������
_(01GB)_04-25-19.indd 4
2019/4/25 15:04:00
English
Do not clean with water when the AC adaptor is
attached.
Do not use anything other than the supplied AC adaptor
for any purpose.
Also, do not use any other product with the supplied AC
adaptor. (See page 10.)
The following symbol indicates that a specific
detachable power supply unit is required for connecting
the electrical appliance to the supply mains. The type
reference of power supply unit is marked near the
symbol.
(One of the power supply unit specified is provided with
this appliance.)
5
PB017706 - ER-GC63 53
������
_(01GB)_04-25-19.indd 5
2019/4/25 15:04:00
English
Safety precautions
To reduce the risk of injury, loss of life, electric shock,
re, and damage to property, always observe the
following safety precautions.
Explanation of symbols
The following symbols are used to classify and
describe the level of hazard, injury, and property
damage caused when the denotation is disregarded
and improper use is performed.
This product
This product has a built-in rechargeable
battery. Do not throw into flame or heat.
- Doing so may cause fluid leak, overheating, or
explosion.
Do not modify or repair.
- Doing so may cause re, electric shock, or injury.
Contact an authorized service centre for repair
(battery change, etc.).
Never disassemble except when disposing of
the product.
- Doing so may cause re, electric shock, or injury.
In case of an abnormality or malfunction
Immediately stop using and remove the
adaptor if there is an abnormality or
malfunction.
- Failure to do so may cause fire, electric shock,
or injury.
<Abnormality or malfunction cases>
The main body or AC adaptor is deformed or
abnormally hot.
The main body or AC adaptor smells of
burning.
There is abnormal sound during use or
charging of the main body or AC adaptor.
- Immediately request inspection or repair at an
authorized service centre.
The following symbols are used to classify and
describe the type of instructions to be observed.
6
PB017706 - ER-GC63 53
������
_(01GB)_04-25-19.indd 6
2019/4/25 15:04:01
English
This symbol is used to alert users to a specific
operating procedure that must not be performed.
This symbol is used to alert users to a specific
operating procedure that must be followed in
order to operate the unit safely.
Denotes a potential
DANGER hazard that will result in
serious injury or death.
Denotes a potential
WARNING
hazard that could result
in serious injury or
death.
Denotes a hazard that
CAUTION could result in minor
injury or property
damage.
WARNING
Always unplug the adaptor from a household
outlet when cleaning.
- Failure to do so may cause electric shock or
injury.
Power supply
Do not connect or disconnect the adaptor to
a household outlet with a wet hand.
- Doing so may cause electric shock or injury.
Do not immerse the AC adaptor in water or
wash with water.
Do not place the AC adaptor over or near
water filled sink or bathtub.
Never use the appliance if the AC adaptor is
damaged or if the power plug fits loosely in a
household outlet.
Do not damage the cord or power plug.
Do not deface, modify, forcefully bend or
pull the cord or power plug.
Also, do not place anything heavy on, twist
or pinch the cord.
-
Doing so may cause electric shock or re due
to a short circuit.
Do not use in a way exceeding the rating of
the household outlet or the wiring.
-
Exceeding the rating by connecting too many
plugs to one household outlet may cause re
due to overheating.
Always ensure the appliance is operated on
an electric power source matched to the
rated voltage indicated on the AC adaptor.
Fully insert the adaptor.
-
Failure to do so may cause re or electric shock.
Regularly clean the power plug and the
appliance plug to prevent dust from
accumulating.
- Failure to do so may cause fire due to insulation
failure caused by humidity.
Disconnect the adaptor and wipe with a dry
cloth.
Preventing accidents
Do not store within the reach of children or
infants. Do not let them use it.
-
Putting parts or accessories in the mouth may
cause an accident or injury.
If the oil is consumed accidentally, do not
induce vomiting, drink a large amount of
water, and contact a physician.
If the oil comes into contact with eyes,
immediately wash thoroughly with running
water, and contact a physician.
-
Failure to do so may result in physical
problems.
7
PB017706 - ER-GC63 53
������
_(01GB)_04-25-19.indd 7
2019/4/25 15:04:02
English
WARNING
Disconnect the adaptor from the household
outlet when not using.
-
Failure to do so may cause electric shock or re
due to electrical leakage resulting from
insulation deterioration.
Disconnect the adaptor or the appliance plug
by holding onto the adaptor or the appliance
plug instead of the cord.
-
Failure to do so may cause electric shock or
injury.
Protecting the skin
Do not press the blade strongly on your lip or
skin.
Do not use this product for any purpose
other than trimming beard and hair.
Do not directly apply the blades on ears or
rough skin (such as swellings, injuries or
blemishes).
- Doing so may cause skin injury.
Handling of the removed battery when disposing
Check that the blades are not damaged or
deformed before use.
- Failure to do so may cause skin injury.
Note the following precautions
Do not allow metal objects or trash to adhere
to the power plug or the appliance plug.
- Doing so may cause electric shock or re due
to a short circuit.
The rechargeable battery is exclusively for
use with this appliance. Do not use the
battery with other products.
Do not charge the battery after it has been
removed from the product.
Do not throw into fire or apply heat.
Do not solder, disassemble, or modify the
battery.
Do not let the positive and negative terminals
of the battery get in contact with each other
through metallic objects.
Do not carry or store the battery together
with metallic jewellery such as necklaces and
hairpins.
Never peel off the tube.
- Doing so may cause fluid leak, overheating, or
explosion.
Do not drop or hit against other objects.
- Doing so may cause injury.
Do not wrap the cord around the adaptor and
main body when storing.
- Doing so may cause the wire in the cord to
break with the load, and may cause re due to
short circuit.
8
PB017706 - ER-GC63 53
������
_(01GB)_04-25-19.indd 8
2019/4/25 15:04:04
English
DANGER
CAUTION
Important information
Before using an attachment, check that it has been
installed correctly. Failure to do so may cause hair to
be cut too short.
The appliance should not be used on animals.
Before and after each use, apply oil at the places
marked with arrows. (See page 17.)
Failure to apply the oil may cause the following
problems.
-
The blade has become blunt.
-
Shorter operating time.
-
Louder sound.
Store the main body in a place with low humidity after
use. Failure to do so may cause malfunction due to
condensation or rust.
The appliance may become warm during operation
and/or charging. This is normal.
Charge the appliance correctly according to these
Operating Instructions. (See page 11 “Charging”.)
This appliance contains battery that is only
replaceable by skilled persons. Please contact an
authorized service centre for the details of repair.
The battery contains alkaline fluid. If it comes
in contact with the eyes, do not rub the eyes,
and thoroughly rinse with clean water, such
as tap water.
- Failure to do so may cause loss of vision.
Consult a physician immediately.
After removing the rechargeable battery, do
not keep it within reach of children and
infants.
- The battery will harm the body if accidentally
swallowed.
If this happens, consult a physician
immediately.
The battery contains alkaline fluid. If it comes
in contact with the skin or clothes, rinse off
with clean water, such as tap water.
- Failure to do so may cause skin injury.
9
PB017706 - ER-GC63 53
������
_(01GB)_04-25-19.indd 9
2019/4/25 15:04:04
English
WARNING
DANGER
Parts identification
A
B
E
(J
(J
@
@
®
®
®
ER-GC71
ER-GC63/
ER-GC53
C
C
D
F
G
H
ER-GC71/
ER-GC63
ER-GC71
Main body
1 Trimming height indication mark
2 Dial (Height adjustment control)
9 Stationary blade
Mounting hook
Comb attachment [
(1 mm to 10 mm)
Comb attachment [
ER-GC71/ER-GC63
(11 mm to 20 mm)
AC adaptor
Adaptor
Power plug
Cord
Appliance plug
Accessories
Cleaning brush
G Oil
H Pouch ER-GC71
]
3 Power switch [ /
]
]
4 Charge indicator lamp (
)
5 Appliance socket
6 Water inlet
Blade
ER-GC71
ER-GC63/ER-GC53
7 Cleaning lever
8 Moving blade
(RE9-49/RE9-52/RE9-86)
The shape of the AC adaptor
differs depending on the area.
One of the power supply units
specified is provided with this
appliance.
10
PB017706 - ER-GC63 53
_(01GB)_04-25-19.indd
10
2019/4/25
15:04:06
English
Notes
To keep charging the battery will not affect battery
performance.
If there is crackling noise on radios or other devices
while charging, charge the clipper using a different
household outlet.
When the appliance is not used for 6 months or more,
the battery will weaken (leak battery fluid, etc.). Fully
charge the battery once every 6 months.
When charging the clipper for the first time or when it
has not been in use for more than 6 months, the
charging time may change or the lamp on the main
body may not glow for a few minutes. Please charge it
for more than 16 hours in such cases.
Recommended ambient temperature for charging is
0 °C 35 °C. Battery performance may decrease
outside of the recommended temperature.
A full charge supplies enough power for
approximately 40 minutes of use. (Based on dry
using at 20 °C 30 °C.)
The operating time may differ depending on the
frequency of use, the operating method and the
ambient temperature.
You can charge the battery before it is completely
discharged. However, it is recommended to charge
when the battery is completely discharged. The
battery life depends strongly on factors such as how
it is used and stored.
Preparation
Charging
Make sure that the clipper is turned off.
1
2
Connect the appliance plug to the
appliance socket.
Plug in the adaptor into a
household outlet.
Charging is completed after
approx. 8 hours.
Check that the charge indicator
lamp ( ) glows.
2
1
3
Disconnect the adaptor after charging is
completed.
(for safety and to reduce energy usage)
The charge indicator lamp ( ) continues to glow
after charging is complete. There is no indication to
show that “charging is complete”.
11
PB017706 - ER-GC63 53
_(01GB)_04-25-19.indd
11
2019/4/25 15:04:07
English
AC operation
If you connect the AC adaptor to the clipper in the
same way as for charging, and turn on the power, you
can use it.
If the remaining battery is too low, the blades may
move slowly or stop, even with the AC operation. In
this case, charge the battery for 3 minutes or more.
The battery will be discharged, even with the AC
operation.
Removing and mounting the comb attachments
Take care not to injure hands, etc., with the blade
when removing or mounting the attachment.
Removing the comb attachment
Hold the main body securely and remove
the comb attachment from the main body.
Mounting the comb attachment
Mount the comb attachment to the main
body until it clicks.
If the comb attachment is not attached
correctly, it may shift and end up cutting
too much during use.
Make sure that the clipper is turned off.
Apply the oil to the clipper before and after each use.
(See page 17.)
The appliance may not operate in an ambient
temperature approximately 0 °C or lower.
1
Mount the desired comb attachment and adjust
the trimming height as needed. (See pages 12
and 13.)
It can also be used without the comb attachment.
(Trimming height: approx. 0.5 mm)
How to adjust the trimming height
Make sure that the clipper is turned off.
Turn the dial and adjust the trimming height
indication mark ( a ) to the desired height.
2
Slide the power switch on the main
a
body to the “
the power.
Trimming hair
Trimming beard
” position to turn on
(See pages 13 and 14.)
(See pages 14 and 15.)
ER-GC71/
ER-GC63
ER-GC53
12
PB017706 - ER-GC63 53
_(01GB)_04-25-19.indd
12
2019/4/25 15:04:08
English
Using the clipper
Comb attachment
[ ]
Trimming height
(estimate):
1 mm to 10 mm
Trimming hair
Do not use when the hair is wet.
A wet hair may stick to the skin or bunch up, making it
difficult to trim.
To maintain sharpness, remove hair trimmings
between usages.
Before trimming, comb your hair with a comb.
Adjusting the length around the ears and sides
Holding the clipper with the power
switch facing outwards, trim
around the ears and sides by lifting
the tip of the comb attachment little
by little from the hairline.
ER-GC71/
ER-GC63
ER-GC53
Comb attachment [ ]
ER-GC71/ER-GC63
Trimming height (estimate):
11 mm to 20 mm
Trim your hair while holding
down your ear with one hand.
Holding the clipper with the
power switch facing outwards,
trim from the neckline to the
back of your head by lifting the
tip of the comb attachment little
by little from the hairline.
Notes
Actual hair length will be a little longer than the height
you set.
Setting of 10.5 mm is unavailable.
It can also be used without the comb attachment.
(Trimming height: approx. 0.5 mm)
13
PB017706 - ER-GC63 53
_(01GB)_04-25-19.indd
13
2019/4/25 15:04:13
English
How to align the length at the neckline and at the
back of your head
Indicator
16
17
18
19
20
Trimming height
(mm) (estimate)
16
16.5
17
17.5
18
18.5
19
19.5
20
Indicator
11
12
13
14
15
Trimming height
(mm) (estimate)
11
11.5
12
12.5
13
13.5
14
14.5
15
15.5
Indicator
6
7
8
9
10
Trimming height
(mm) (estimate)
6
6.5
7
7.5
8
8.5
9
9.5
10
Indicator
1
2
3
4
5
Trimming height
(mm) (estimate)
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
Shaping your sideburns
Trimming to an even length
Holding the clipper with the
power switch facing outwards,
trim slowly while crisscrossing
from various directions to
avoid missing any spots.
Notes
It is recommended to ask someone else to trim
around your own ears and neckline.
The desired results may not be achieved if hair is too
long. In this case, trim the hair to a length of about
2 cm before using the clipper.
Holding the clipper with the power switch at the
bottom, keep the blade at an angle of 90° against
the sideburns and move the clipper from top to
bottom along the skin to trim the sideburns.
Trimming the downy hair around the neckline
Trimming beard
Do not use with shaving foam applied or when the
beard is wet.
A wet beard may stick to the skin or bunch up, making
it difficult to trim.
Before trimming, comb your moustache with a comb.
Holding the clipper with the
power switch at the bottom,
touching the blade perpendicular
to the area of downy hair, and
move the clipper downward
along the skin.
90°
Trimming to an even length
Holding the clipper with the power
switch facing outwards, trim by
bringing the blade in contact with
the skin and moving the clipper
against the flow of the beard.
Hair trimmings may collect inside the
comb attachment when a large
volume of beard is cut, so discard hair
trimmings after each use.
14
PB017706 - ER-GC63 53
_(01GB)_04-25-19.indd
14
2019/4/25
15:04:14
English
Without comb attachment
Without comb attachment
Trimming the downy hair
Cleaning with water
Main body, blade and comb attachment
Holding the clipper with the power
switch facing outwards, trim by
bringing the blade in contact with
the skin.
The clipper cannot trim hair to
lengths less than 0.5 mm.
Maintenance
Clean the clipper and the blade after each use.
(If not cleaned, the motion will become poor and the
sharpness will worsen.)
Make sure that the clipper is turned off.
Remove the clipper from the AC adaptor.
Do not use thinner, benzine, alcohol or other
chemicals. Doing so may cause failure, cracking or
discoloration of the main body. Clean the main body
only with a soft cloth slightly dampened with tap water
or soapy tap water.
15
PB017706 - ER-GC63 53
_(01GB)_04-25-19.indd
15
2019/4/25 15:04:15
English
To remove light dirt
To remove heavy dirt
1.
Remove the comb
attachment and turn
the clipper on.
2.
Run water down the
water inlet at the front
of the main body, rinse
thoroughly for
approximately 20
seconds, and then turn
the clipper off.
1.
Remove the comb
attachment and blade.
2.
Clean the clipper, the
blade and the comb
attachments with
running water.
Shake up and down several times to remove the
water.
Be careful not to hit the main body on the sink or
any other object while draining the water. Failure
to do so may cause malfunction.
Without comb attachment
3.
Wipe off the water with a towel
and let it dry naturally.
It will dry faster with the blade
removed.
4.
Apply the oil to the blade after
drying. (See page 17.)
5.
Attach the blade and
attachment to the main body.
Removing and mounting the blade
Removing the blade
Hold the clipper with the switch
facing upward and push the
blade with your thumb while
catching the blade in your other
hand.
Mounting the blade
Fit the mounting hook (
B
) into the blade mounting (
A
)
on the clipper and then push in until you hear a click.
Cleaning with the brush
Main body and blade
Remove the blade. (See this page.)
1. Brush off any hair trimmings
from the main body and from
around the blade.
A
B
2.
Brush off the hairs from the
blade edge.
3.
Brush any hair trimmings out
from between the stationary
blade and the moving blade
while pressing down the
cleaning lever ( a ) to raise the
moving blade.
4.
Apply the oil to the blade. (See page 17.)
a
5. Attach the blade and attachment to the main body.
16
PB017706 - ER-GC63 53
_(01GB)_04-25-19.indd
16
2019/4/25
15:04:16
English
Lubrication
Apply the oil to the clipper before and after each use.
Make sure that the clipper is turned off.
Replacement parts
Replacement part is available at your dealer or Service
Centre.
1
2
3
Remove the blade.
Apply a drop of the oil to
each indicated point.
Attach the blade to the
main body, turn on the
power and allow to run for
approximately 5 seconds.
Do not use any blade other than the one dedicated as
it may cause defect in performance.
We recommend Panasonic oil WES003.
Troubleshooting
ER-GC71
ER-GC63/ER-GC53
17
PB017706 - ER-GC63 53
_(01GB)_04-25-19.indd
17
2019/4/25 15:04:17
English
Action
When the clipper is very dirty,
remove the blade and wash
with water. (See page 15.)
Confirm that the blade is
properly attached.
Replace the blade.
(See page 16.)
Clean the blade and apply oil.
(See pages 15 to 17.)
Problem
The blade has not
been cleaned
properly.
Makes a loud
sound.
The clipper has
become blunt.
Perform the following actions.
If the problems still cannot be solved, contact the
store where you purchased the unit or a service
centre authorized by Panasonic for repair.
Replacement parts
for ER-GC71/
ER-GC63/ER-GC53
Blade
ER-GC71:WER9615
ER-GC63/53:WER9605
Oil
WES003
Blade life
Blade life varies according to the frequency and period
of use of the clipper.
For example, the blade life is approximately 2 years
when using the clipper for 20 minutes twice a month.
Replace the blades if cutting efficiency reduces
substantially despite proper maintenance.
Battery life
Battery life will vary according to the frequency and
length of use. If the battery is charged once a month,
the service life will be approximately 3 years.
If the operating time is significantly shorter even after a
full charge, the battery has reached the end of its life.
Remove the built-in rechargeable battery before
disposing of the clipper.
The battery is to be disposed of safely.
Please make sure that the battery is disposed of at an
officially designated location if there is one.
18
PB017706 - ER-GC63 53
_(01GB)_04-25-19.indd
18
2019/4/25
15:04:17
English
Removing the built-in rechargeable
battery
Action
Charge the clipper.
Or use with the AC operation.
(See pages 11 and 12.)
Charge the battery for
approximately 16 hours
continuously to rejuvenate it.
If few uses remain even after
charging, the battery has
reached the end of its life.
(Fluid may be leaking due to
degradation at the end of
battery life.)
Contact an authorized service
centre for repair.
Push the appliance plug into
the main body all the way and
make sure the charge indicator
lamp ( ) glows.
Charge within the
recommended charging
temperature of 0 °C to 35 °C.
Have the battery replaced by
an authorized service centre.
Problem
Clipper stopped
functioning.
Operating time
is short.
The clipper cannot
be charged.
Clipper can be
used for only about
10 minutes even
after charging.
This gure must only be used when disposing of the
clipper, and must not be used to repair it. If you
dismantle the clipper yourself, it will no longer be
waterproof, which may cause it to malfunction.
Remove the clipper from the AC adaptor.
Slide the power switch to turn on the power and then
keep the power on until the battery is completely
discharged.
Perform steps 1 to and lift the battery, and then
remove it.
Take care not to short-circuit the positive and negative
terminals of the removed battery, and insulate the
terminals by applying tape to them.
Specifications
This product is intended for household use only.
19
PB017706 - ER-GC63 53
_(01GB)_04-25-19.indd
19
2019/4/25 15:04:18
English
Power source
See the name plate on the AC
adaptor.
(Automatic voltage conversion)
Motor voltage
1.2 V
Charging time
Approx. 8 hours
Airborne
Acoustical Noise
60 (dB (A) re 1 pW)
For environmental protection and recycling of
materials
This clipper contains a Nickel-Metal Hydride battery.
Please make sure that the battery is disposed of at an
officially assigned location, if there is one in your
country.
Disposal of Old Equipment and Batteries
Only for European Union and countries with
recycling systems
These symbols on the products,
packaging, and/or accompanying
documents mean that used electrical and
electronic products and batteries must not
be mixed with general household waste.
For proper treatment, recovery and
recycling of old products and used
batteries, please take them to applicable
collection points in accordance with your
national legislation.
By disposing of them correctly, you will
help to save valuable resources and
prevent any potential negative effects on
human health and the environment.
For more information about collection and
recycling, please contact your local
authority.
Penalties may be applicable for incorrect
disposal of this waste, in accordance with
national legislation.
Note for the battery symbol
(bottom symbol)
This symbol might be used in combination
with a chemical symbol. In this case it
complies with the requirement set by the
Directive for the chemical involved.
20
PB017706 - ER-GC63 53
_(01GB)_04-25-19.indd
20
2019/4/25 15:04:19
English
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303
  • Page 304 304
  • Page 305 305
  • Page 306 306
  • Page 307 307
  • Page 308 308
  • Page 309 309
  • Page 310 310
  • Page 311 311
  • Page 312 312
  • Page 313 313
  • Page 314 314
  • Page 315 315
  • Page 316 316
  • Page 317 317
  • Page 318 318
  • Page 319 319
  • Page 320 320
  • Page 321 321
  • Page 322 322
  • Page 323 323
  • Page 324 324
  • Page 325 325
  • Page 326 326
  • Page 327 327
  • Page 328 328
  • Page 329 329
  • Page 330 330
  • Page 331 331
  • Page 332 332
  • Page 333 333
  • Page 334 334
  • Page 335 335
  • Page 336 336
  • Page 337 337
  • Page 338 338
  • Page 339 339
  • Page 340 340
  • Page 341 341
  • Page 342 342
  • Page 343 343
  • Page 344 344
  • Page 345 345
  • Page 346 346
  • Page 347 347
  • Page 348 348
  • Page 349 349
  • Page 350 350
  • Page 351 351
  • Page 352 352

Panasonic ER-GC71 AC Rechargeable Hair Clipper Manual de utilizare

Tip
Manual de utilizare