Ubiquiti UC-CK Ghid de inițiere rapidă

Model: UC-CK

RESE T

Introduction

Thank you for purchasing the Ubiquiti Networks®

UniFi® Cloud Key. This Quick Start Guide is designed

to guide you through installation and also includes

warrantyterms.

Package Contents

UniFi Cloud Key Ethernet Cable

Model: UC-CK

RESET

microSD Card

(8 GB)

Quick Start Guide

System Requirement

Web Browser: Mozilla Firefox, Google Chrome,

Microsoft Edge, or Microsoft Internet Explorer 11

TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is

the customer’s responsibility to follow local country regulations, including

operation within legal frequency channels, output power, indoor cabling

requirements, and Dynamic Frequency Selection (DFS) requirements.

Network Topology Requirement

A DHCP-enabled network (for the UniFi Cloud Key

to obtain an IP address)

UAP-AC Outdoor

UniFi Cloud Key

UniFi Switch

Internet

UAP-PRO

1G

UAP-AC-LR

UniFi Security

Gateway PRO

LAN

WAN

Sample Network Diagram

All UniFi devices also support off-site management

controllers. For setup details, see the User Guide on

the website: documentation.ubnt.com/unifi

Hardware Overview

Front Panel LED

LED Color Status

White Factory defaults.

Flashing White Initializing.

Alternating

White/Blue

Device is busy; do not touch or

unplug it. This usually indicates

that a process such as a firmware

upgrade is taking place.

Blue Device is working properly.

Top Panel

Ethernet Port

Ethernet This Gigabit Ethernet port is used to

connect the power and should be connected to the

LAN and DHCP server. Power can be provided by an

802.3af PoE switch, such as the Ubiquiti Networks

UniFi Switch.

Bottom Panel

Micro-USB Port

RESET

Reset Button

microSD Slot

Reset The Reset button serves two functions:

• Restart Press and release the Reset button

quickly.

• Restore to Factory Default Settings Press and

hold the Reset button for more than five seconds.

Micro-USB Optional power source (5V, minimum

1A) if PoE is not available.

microSD Reserved for future use.

Hardware Installation

1. Connect the Ethernet Cable to the Ethernet port.

2. Connect the other end of the Ethernet Cable to a

port on a network switch, such as a UniFiSwitch.

1 3 5 7 9 11 13 15 17 19 21 22

2 4 6 8 10 12 14 16 18 20 22 24

SFP1

SFP2

RESET

Powering the UniFi Cloud Key

Use an 802.3af-compliant switch, such as a UniFi

Switch, or a USB power source (not included).

UniFi Switch

The UniFi Cloud Key can be powered by a UniFi

Switch or other 802.3af-compliant switch.

1 3 5 7 9 11 13 15 17 19 21 22

2 4 6 8 10 12 14 16 18 20 22 24

SFP1

SFP2

RESET

UniFi Switch Power Connection Diagram

USB Power Source

Connect the USB cable (not included) from the

UniFi Cloud Key directly to a USB power source

(5V, minimum 1A).

RESET

USB Power Connection Diagram

Software Installation

The UniFi Controller software is pre-installed on the

UniFi Cloud Key. Use one of the following methods

to launch the software:

• If you are using Chrome, go to the Chrome

Instructions section (recommended).

• If you are using a different web browser, go to the

Instructions for Other Web Browsers section.

Chrome Instructions

1. Ensure that your host system is on the same

Layer-2 network as the UniFi CloudKey.

2. Launch the Chrome web browser and type

https://unifi.ubnt.com in the address field.

Press enter (PC) or return (Mac).

https://unifi.ubnt.com

3. Enter the username and password for your

UBNT account. Click Sign In.

4. Click Find Cloud Key.

5. If the Ubiquiti® Device Discovery Tool is already

installed, proceed to step 7.

If the tool is not installed, you will be prompted

to add it. Proceed to step 6.

6. To install the tool:

a. Click Install.

b. Click Add app to confirm.

7. The Ubiquiti Device Discovery Tool will search

for the UniFi Cloud Key. Select it to continue.

8. Configure the UniFi Controller:

a. Select the appropriate country.

b. Select the appropriate time zone.

c. Enter an admin name in the Admin Name

field and a password in the Password field

to use when accessing the management

interface.

d. Confirm your password in the Confirm

Password field.

e. Keep the IP address or enter a hostname in

the Controller Hostname field.

f. If you have changed the default username

or password of the UniFi Cloud Key, then

you must set up login credentials. Select

Use non-default SSH credentials. Enter a

username in the SSH Username field, and

enter a password in the SSH Passwordfield.

g. Click Submit to save your changes.

9. Wait for the UniFi Controller to be adopted, and

then select it.

10. Click Launch Site.

The UniFi Controller management interface will

appear. You can manage your UniFi devices and

view network statistics using the UniFi Controller

management interface.

For information on configuring and using the UniFi

Controller software, refer to the User Guide located

on our website: documentation.ubnt.com/unifi

Instructions for Other Web Browsers

1. Ensure that your host system is on the same

Layer-2 network as the UniFi CloudKey.

2. The UniFi Cloud Key is set to DHCP by default, so

it will try to automatically obtain an IP address.

Assign a specific IP address to the UniFi Cloud

Key, or check the DHCP server for its IP address.

Note: The default fallback IP address of the

UniFi Cloud Key is 192.168.1.30.

3. Launch the web browser. In the address field, type

https:// followed by the appropriate IP address.

Press enter (PC) or return (Mac).

4. Click Manage to run the UniFi Setup Wizard.

Note: You can click Configure to change

the settings of the UniFi Cloud Key. The

default login is ubnt/ubnt.

5. The UniFi Setup Wizard screen appears. Follow

the on-screen instructions. For step-by-step

instructions, refer to the User Guide, which is

available at documentation.ubnt.com/unifi

After the UniFi Setup Wizard is finished, the UniFi

Controller management interface will appear.

Log in with the Admin Name and Password that

you created, and then you can manage your UniFi

devices and view network statistics using the UniFi

Controller management interface.

For information on configuring and using the UniFi

Controller software, refer to the User Guide.

*640-00214-03*

640-00214-03

Specifications

UC-CK

Dimensions 21.7 x 43.4 x 121.9 mm

(0.85 x 1.71 x 4.80")

Weight 110 g (3.88 oz)

Networking Interface (1) 10/100/1000 Ethernet Port

Buttons (1) Reset to Defaults

Power Method

PoE

Micro-USB

48V 802.3af or

Passive PoE (Pairs 4, 5+; 7, 8 Return)

5V

Power Supply 802.3af PoE or

Micro-USB 5V, Minimum 1A

Max. Power

Consumption

5W

Certications CE, FCC, IC

Operating

Temperature

0 to 40° C

(32 to 104° F)

Operating Humidity 20 to 90% Noncondensing

Safety Notices

1. Read, follow, and keep these instructions.

2. Heed all warnings.

3. Only use attachments/accessories specified by the

manufacturer.

WARNING: Do not use this product in location

that can be submerged by water.

WARNING: Avoid using this product during an

electrical storm. There may be a remote risk of

electric shock from lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency,

and current requirements indicated on the manufacturer’s

label. Connection to a different power source than those

specified may result in improper operation, damage to

the equipment or pose a fire hazard if the limitations are

not followed.

2. There are no operator serviceable parts inside this

equipment. Service should be provided only by a

qualified service technician.

Limited Warranty

UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants

that the product(s) furnished hereunder (the “Product(s)”)

shall be free from defects in material and workmanship for a

period of one (1) year from the date of shipment by UBIQUITI

NETWORKS under normal use and operation. UBIQUITI

NETWORKS’ sole and exclusive obligation and liability under

the foregoing warranty shall be for UBIQUITI NETWORKS, at

its discretion, to repair or replace any Product that fails to

conform to the above warranty during the above warranty

period. The expense of removal and reinstallation of any

Product is not included in this warranty. The warranty period

of any repaired or replaced Product shall not extend beyond

its original term.

Warranty Conditions

The above warranty does not apply if the Product:

(I) has been modified and/or altered, or an addition

made thereto, except by Ubiquiti Networks, or

Ubiquiti Networks’ authorized representatives, or as

approved by Ubiquiti Networks in writing;

(II) has been painted, rebranded or physically modified

in any way;

(III) has been damaged due to errors or defects in cabling;

(IV) has been subjected to misuse, abuse, negligence,

abnormal physical, electromagnetic or electrical

stress, including lightning strikes, or accident;

(V) has been damaged or impaired as a result of using

third party firmware;

(VI) has no original Ubiquiti MAC label, or is missing any

other original Ubiquiti label(s); or

(VII) has not been received by Ubiquiti within 30 days of

issuance of the RMA.

In addition, the above warranty shall apply only if: the

product has been properly installed and used at all times in

accordance, and in all material respects, with the applicable

Product documentation; all Ethernet cabling runs use CAT5

(or above), and for outdoor installations, shielded Ethernet

cabling is used, and for indoor installations, indoor cabling

requirements are followed.

Returns

No Products will be accepted for replacement or repair

without obtaining a Return Materials Authorization (RMA)

number from UBIQUITI NETWORKS during the warranty

period, and the Products being received at UBIQUITI

NETWORKS’ facility freight prepaid in accordance with the

RMA process of UBIQUITI NETWORKS. Products returned

without an RMA number will not be processed and will be

returned freight collect or subject to disposal. Information on

the RMA process and obtaining an RMA number can be found

at: www.ubnt.com/support/warranty.

Disclaimer

EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN,

UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR

THIRD PARTY DATA, SERVICE, SOFTWARE AND HARDWARE

PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER

REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS,

IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED

TO, REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF

MERCHANTABILITY, ACCURACY, QUALITY OF SERVICE OR

RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF

VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR

PURPOSE AND NON-INFRINGEMENT AND ANY WARRANTIES

ARISING FROM ANY COURSE OF DEALING, USAGE OR

TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS

AND SERVICES. BUYER ACKNOWLEDGES THAT NEITHER

UBIQUITI NETWORKS NOR ITS THIRD PARTY PROVIDERS

CONTROL BUYER’S EQUIPMENT OR THE TRANSFER OF

DATA OVER COMMUNICATIONS FACILITIES, INCLUDING THE

INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY

BE SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS,

CANCELLATIONS AND OTHER PROBLEMS INHERENT IN

THE USE OF COMMUNICATIONS FACILITIES. UBIQUITI

NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD PARTY

PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS,

DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS,

CONTENT CORRUPTION, PACKET LOSS, OR OTHER DAMAGE

RESULTING FROM ANY OF THE FOREGOING. In addition,

UBIQUITI NETWORKS does not warrant that the operation

of the Products will be error-free or that operation will be

uninterrupted. In no event shall UBIQUITI NETWORKS be

responsible for damages or claims of any nature or description

relating to system performance, including coverage, buyer’s

selection of products (including the Products) for buyer’s

application and/or failure of products (including the Products)

to meet government or regulatory requirements.

Limitation of Liability

EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO

EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR

SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL,

CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING LOST

PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING OUT OF

THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE

PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT

OR OTHER LEGAL THEORY, AND WHETHER OR NOT ADVISED

OF THE POSSIBILITY OF SUCH DAMAGES.

Note

Some countries, states and provinces do not allow exclusions

of implied warranties or conditions, so the above exclusion

may not apply to you. You may have other rights that

vary from country to country, state to state, or province

to province. Some countries, states and provinces do not

allow the exclusion or limitation of liability for incidental or

consequential damages, so the above limitation may not

apply to you. EXCEPT TO THE EXTENT ALLOWED BY LOCAL

LAW, THESE WARRANTY TERMS DO NOT EXCLUDE, RESTRICT

OR MODIFY, AND ARE IN ADDITION TO, THE MANDATORY

STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF ANY

SOFTWARE (EMBEDDED IN THE PRODUCT) TO YOU. The

United Nations Convention on Contracts for the International

Sale of Goods shall not apply to any transactions regarding

the sale of the Products.

Pagina se încarcă ...

Ubiquiti UC-CK Ghid de inițiere rapidă

Acest manual este potrivit și pentru

Ubiquiti UC-CK Ghid de inițiere rapidă

în alte limbi

Lucrări conexe

Alte documente