Silvercrest SKRD 30 A1 Operating Instructions Manual

Under-Cabinet Radio SKRD 30 A1

R

Кухненско радио

Ръководство за експлоатация

Radio

Instrucţiuni de utilizare

R

Under-Cabinet Radio

Operating instructions

Ugradbeni radio

Upute za upotrebu

Unterbau-Radio

Bedienungsanleitung

KOMPERNASS GMBH

BURGSTRASSE 21 · D-44867 BOCHUM

www.kompernass.com

ID-Nr.: SKRD 30 A1-07/11-V3

IAN: 69030

CV_69030_SKRD30A1_LB7.indd 1-3CV_69030_SKRD30A1_LB7.indd 1-3 17.08.2011 15:35:03 Uhr17.08.2011 15:35:03 Uhr

SKRD 30 A1

A

B

1

2

3

zt

4

uiopp

5 6 7 8 9 0 q w e r

CV_69030_SKRD30A1_LB7.indd 4-6CV_69030_SKRD30A1_LB7.indd 4-6 17.08.2011 15:35:09 Uhr17.08.2011 15:35:09 Uhr

1

SKRD 30 A1

GB

Index

Introduction . . . . . . . . . . . . . . 2

Information for these operating

instructions . . . . . . . . . . . . . . . . . . . . 2

Copyright . . . . . . . . . . . . . . . . . . . . .2

Proper usage . . . . . . . . . . . . . . . . . . 2

Warning notices . . . . . . . . . . . . . . . . 3

Safety . . . . . . . . . . . . . . . . . . . . . . . . 4

Danger from electric shock . . . . . . . . 4

Handling of batteries . . . . . . . . . . . . 4

Basic Safety Instructions . . . . . . . . . . 5

Operating components . . . . . 6

Setting up and connecting . . .7

Safety instructions . . . . . . . . . . . . . . 7

Package contents and transport

inspection . . . . . . . . . . . . . . . . . . . . . 7

Unpacking . . . . . . . . . . . . . . . . . . . . 7

Disposal of the packaging . . . . . . . . 8

Set-up location requirements. . . . . . .8

Electrical connection . . . . . . . . . . . . . 8

Inserting the battery . . . . . . . . . . . . . 9

Mounting under a wall cupboard . . 9

Disassembly . . . . . . . . . . . . . . . . . .10

Setting up the device . . . . . . . . . . .10

Providing mains power . . . . . . . . . .10

VHF wire antenna . . . . . . . . . . . . .10

Handling and operation . . .11

Switching On and Oﬀ . . . . . . . . . .11

Basic settings . . . . . . . . . . . . . . . . .11

Activating the settings menu . . . . .11

Setting the time . . . . . . . . . . . . . . . .12

Setting the date . . . . . . . . . . . . . . .12

Setting the memory function . . . . . .12

Setting the time of day format . . . .13

Setting automatic display dimming. 13

Setting the display dimming’s

switch on and oﬀ time . . . . . . . . . .14

Kitchen timer . . . . . . . . . . . . . . . . . .14

Setting the kitchen timer . . . . . . . . .14

Starting the kitchen timer . . . . . . . .15

Pausing the kitchen timer. . . . . . . . .15

Programming the kitchen timer . . . .16

Accessing the kitchen timer . . . . . .16

Programming alarm wake times . . .17

Wake with alarm tone . . . . . . . . . .17

Waken with radio . . . . . . . . . . . . . .18

Switching the alarm oﬀ . . . . . . . . . .18

When the wake time has arrived . .18

The Reminder function . . . . . . . . . .19

Radio operation . . . . . . . . . . . . . . .19

Switching the radio on/oﬀ . . . . . . .19

Adjusting the volume. . . . . . . . . . . .19

Manual station selection. . . . . . . . .19

Search for the next station . . . . . . .20

Saving stations manually . . . . . . . .20

Access saved stations . . . . . . . . . .20

Automatic station search

(AMS function) . . . . . . . . . . . . . . .20

Additional functions . . . . . . . . . . . .21

Automatic switch oﬀ (Sleep function) .21

Button lock . . . . . . . . . . . . . . . . . . .21

Bass accentuation . . . . . . . . . . . . . .21

Setting the display brightness

manually . . . . . . . . . . . . . . . . . . . . .22

Setting alternative display . . . . . . .22

Cleaning . . . . . . . . . . . . . . . .22

Safety instructions . . . . . . . . . . . . .22

Cleaning the housing . . . . . . . . . . .22

Troubleshooting . . . . . . . . . .23

Safety instructions . . . . . . . . . . . . .23

Malfunction causes and remedies .23

Storage/Disposal . . . . . . . . .24

Storage . . . . . . . . . . . . . . . . . . . . . .24

Disposal of the device . . . . . . . . . .24

Disposing of the batteries . . . . . . . .24

Appendix . . . . . . . . . . . . . . .25

Information regarding the

EG conformity declaration . . . . . . .25

Technical data . . . . . . . . . . . . . . . .25

Warranty . . . . . . . . . . . . . . . . . . . .26

Service . . . . . . . . . . . . . . . . . . . . . .26

Importer . . . . . . . . . . . . . . . . . . . . .26

2

Introduction

SKRD 30 A1

GB

Introduction

Information for these operating instructions

These operating instructions are a component of the Under-Cabinet Radio

SKRD 30 A1 (henceforth designated as the device) and they provide you with

important information about the intended use, safety, installation and connection

as well as operation of the device.

The operating instructions must be kept available in the vicinity of the device

at all times. They are to be read and used by anyone assigned to service and

repair faults in the device.

Retain these operating instructions and pass them on with the device to any

future owners.

Copyright

This documentation is copyright protected.

Any copying or reproduction, including as extracts, as well as the reproduction

of images, also in an altered state, is not permitted without the express written

consent of the manufacturer.

Proper usage

This device is only intended for the reception of VHF radio programmes, as a

kitchen timer and as an alarm by means of an alarm tone or radio in enclosed

spaces. The device is intended as a free standing unit or for mounting under a

cupboard. For these purposes the supplied stand and/or mounting plate must be

used. Any other use or uses beyond those mentioned are considered unintended

use. The device is not intended for use in commercial or industrial environments.

WARNING

Danger from unintended use!

Danger from the device can result if it is used for unintended purposes and/or

other types of use.

Use the device exclusively for intended purposes. ►

Observe the procedures described in these operating instructions. ►

No warranty claims of any kind will be accepted for damage caused by improper

use, unauthorised r

epair

s, unauthorised modiﬁ cations or for the use of unapproved

replacement parts.

The operator alone bears liability.

3

Introduction

SKRD 30 A1

GB

Warning notices

In the current operating instructions the following warning notices are used:

DANGER

A warning in this danger level indicates a hazard threatening

situation.

In the ev

ent that the hazardous situation is not avoided it can lead to death

or serious injury.

The directives in this warning are there in order to avoid the danger of ►

death or serious injury.

WARNING

A warning of this danger level signiﬁ es a possible dangerous

situation.

If the dangerous situation is not avoided it can lead to injuries.

The directives in this warning are there to avoid personal injuries. ►

IMPORTANT

A warning of this danger level signiﬁ es possible pr

operty

damage.

If the situation is not avoided it can lead to property damage.

The directives in this warning are there to avoid property damage. ►

NOTICE

A notice signiﬁ es additional information that assists in the handling of the ►

device.

4

Introduction

SKRD 30 A1

GB

Safety

In this section you receive important safety information regarding handling of the

device.

This device complies with the statutory safety regulations. Incorrect usage can

lead to injuries and property damage.

Danger from electric shock

DANGER

Risk of fatal electrocution!

A life-t

hreatening situation can arise from contact with live

wires or components!

Observe the following safety instructions to avoid electric shock hazards:

Do not use the device if the mains power plug or the connection cable are ►

damaged.

Do not, under any cir

cumstances, open the device housing. The risk of an ►

electric shock is present if the power carrying connections are touched or

the electrical or mechanical construction is changed.

Handling of batteries

WARNING

Danger from improper use!

For safe handling of batteries observe the following safety instructions:

Do not throw batteries into a ﬁ re. There is the risk of an explosion! ►

Do not short circuit batteries. ►

Do not attempt to recharge batteries. ►

Regularly check the condition of the batteries. Leaking battery acid can

►

cause permanent damage to the device. Special caution should be shown

when handling damaged or leaking batteries. Danger from acid burns!

Wear protective gloves.

Store batteries in a place inaccessible to children. If swallowed seek ►

immediate medical attention.

If you do not intend to use the de

vice for an extended period of time, ►

remove the batteries.

5

Introduction

SKRD 30 A1

GB

Basic Safety Instructions

For safe handling of the device observe the following safety instructions:

Before use check the device for visible external damage. Do not put into ■

operation a device that is damaged or has been dr

opped.

Damaged cables or connections should be replaced by authorised qualiﬁ ed ■

persons or by the customer service department.

This device is not intended for use b

y individuals (including children) with ■

restricted physical, physiological or intellectual abilities or deﬁ ciences in

experience and/or kno

wledge unless they are supervised by a person

responsible for their safety or receive from this person instruction on how

the device is to be used.

Children must be supervised in order to make sure that they do not play with ■

the device.

Repair

s should only be carried out by authorized specialist companies or by ■

the customer service department. Incorrect repairs can result in danger to the

user. In addition w

arranty claims become void.

A repair to the device during the warranty period may only be carried out ■

by a customer service department authorized by the manufacturer otherwise

no additional warr

anty claims can be considered for subsequent damages.

Defective components may only be replaced with original replacement parts. ■

Only by using original replacement parts can you guarantee that the safety

requir

ements are complied with.

Protect the device from moisture and liquid penetration. Never submerge the ■

device in water, do not place the device in the vicinity of water and do not

stand any object ﬁ

lled with liquid (i.e. vases) on the device.

Do not place any objects on the device. ■

Do not operate the device in the vicinity of open ﬂ ames (i.e. candles). ■

Avoid direct sunlight. ■

Always pull on the power plug when disconnecting from the wall socket, ■

never pull on the connection cable.

If malfunctions occur or thunder storms thr

eaten pull the po

wer plug from the ■

wall socket.

6

Operating components

SKRD 30 A1

GB

Operating components

(for illustrations see fold out sides ﬁ gure A)

Mounting plate/Stand

2

Control panel

3

Display

4

On/Oﬀ : On/Oﬀ switch (Radio)

5

Dimmer/AOT: Display brightness setting/Switch oﬀ timer

6

Lock/Mem.: Button lock/memory slot selection

7

Bass/AMS/Mode: Bass accentuation/Station search/Access setting menu

8

Alarm 1: Alarm 1 programming/Alternative display settings

9

Alarm 2: Alarm 2 programming/Alternative display settings

10

Preset–: selection of the previous memory slot

11

Preset+: selection of the next memory slot

12

Tune–: Decrease the reception frequency

13

Tune+: Increase the reception frequency

14

VOLUME/Snooze/Timer: Volume control/Alarm switch oﬀ /Timer setting

15

Wire antenna for VHF reception

16

Mains connection cable

17

Recesses for stand

18

Speakers

19

Battery compartment

20

Unlocking buttons for the mounting plate

7

Setting up and connecting

SKRD 30 A1

GB

Setting up and connecting

Safety instructions

WARNING

Damage may occur to property and injuries to people when

operating the device!

Observe the following safety instructions to avoid dangers:

Packaging material should not be used as a play thing. There is a risk of ►

suﬀ ocation!

To av

oid risks to persons and property, observe the requirements for the ►

set-up location and the electrical connections.

Package contents and transport inspection

The device is delivered with the following components as standard:

Under-Cabinet Radio SKRD 30 A1 ▯

Mounting plate/Stand ▯

4 Securing screws ▯

1 x Battery 3 V Type CR2032 ▯

Operating instructions ▯

NOTICE

Check the contents to make sure everything is there and for visible damage. ►

If the items supplied are incomplete, or damaged due to defective packaging ►

or transportation, contact the Service Hotline (see section Service

).

Unpacking

Remove all device parts and the operating instructions from the carton. ♦

Remove all packing material. ♦

8

Setting up and connecting

SKRD 30 A1

GB

Disposal of the packaging

The packaging protects the device from transport damage. The packaging ma-

terials are selected from the point of view of their environmental friendliness and

disposal technology and are therefore recyclable.

The recirculation of packaging into the material circuit saves on raw material

and reduces generated waste. Dispose of packaging material that is no longer

needed according to the regionally established regulations.

NOTICE

If possible preserve the device's original packaging during the warranty ►

period so that in the case of a warranty claim you can package the device

properly for r

eturn.

Set-up location requirements

For the safe and fault free operation of the device, the set-up location must fulﬁ ll

the following conditions:

When setting up the device place it on a ﬁ rm, ﬂ at and even surface. Use the ■

supplied stand.

Set up or mount the device in such a w

ay that the available ventilation open- ■

ings and the speaker ar

e not covered.

Do not operate the device in a hot, wet or very humid location or in the vicin- ■

ity of ﬂ ammable materials.

The surfaces of furnitur

e may contain components that could aﬀ ect and sof- ■

ten the rubber feet on the device. If necessary, place an anti-slip mat under

the rubber feet of the device.

The w

all socket must be easily accessible so that, in an emergency, the plug ■

can be quickly withdrawn from the socket.

Electrical connection

Before connecting the device, compare the connection data (voltage and ■

frequency) on the rating plate of the device with that of your power supply

network. This data must be compatible to avoid possible damage to the device.

Make sure that the device’s connection cable is not damaged and is not ■

laying over hot surfaces and/or sharp edges.

Make sur

e that the connection cable is not tightly stretched or bent. ■

Do not allow the connection cord to hang over edges (Trip wire eﬀ ect). ■

9

Setting up and connecting

SKRD 30 A1

GB

Inserting the battery

By inserting the battery you can avoid the loss of programmed time of day and

alarm times in the event of a possible power outage. The battery ensures that

the internal clock continues to run even during a power failure. When power is

restored the correct time appears automatically in the display

3

.

NOTICE

The device can also be operated without a battery. ►

Open the cover of the battery compartment ♦

19

on the underside of the

device by turning the cover to the left, with a coin, as far as it will go and

then lift oﬀ .

Insert the battery type CR2032 (supplied) into the battery compartment. ♦

The side with the marking + points upwards.

Close the battery compar

tment by attaching the cover and then with a coin ♦

turn it to the right.

Mounting under a wall cupboard

(Illustration see fold out side ﬁ gure B)

With the supplied mounting plate you can mount the device under, for exam-

ple, a wall cupboard. For mounting of the device proceed as follows:

Press both unlocking buttons ♦

20

on the rear panel of the device downwards

thereby, at the same time, sliding the mounting plate backwards and

remove the mounting plate .

Find a suitable set-up location for the device (see also the section ♦

Requirements for the set-up location).

Hold the mounting plate ♦

under the set-up location. Thereby the front edge

of the mounting plate should be approx. 3,5 cm behind the front of the

cupboard so that, after Remove the mounting, the device is ﬂ ush with the

cupboard.

Mark the 4 fastening points with a pencil. ♦

Using a spike or nail, make a small depression at the respective marking ♦

points. Screw the mounting plate

tightly with the supplied screws as

illustrated in ﬁ gure B.

Place the device aslant, with the front recesses in the top face, in the mount- ♦

ing plate

. Press the rear part of the device upwards against the mounting

plate until the device audibly locks into place.

Check to make sure that the device is secure. ♦

10

Setting up and connecting

SKRD 30 A1

GB

Disassembly

Press both unlocking buttons ♦

20

on the rear panel of the device downwards,

thereby sliding, at the same time, the device forward and then remove the

device downwards.

Unscrew the screws on the mounting plate ♦

and remove the mounting

plate .

Setting up the device

As an alternative you can stand the device on a top. So as not to cover up the

ventilation slots and the speaker

18

on the underside of the device, when setting

up the device it must be mounted on the stand . For assembly of the stand

proceed as follows:

Press both unlocking buttons ♦

20

on the rear panel of the device downwards

thereby, at the same time, sliding the mounting plate backwards and remove

the mounting plate . The mounting plate can now be used as a stand.

Slide both front retaining tabs of the stand ♦

into the rear recesses

17

on

the underside of the device.

Press both rear retaining tabs of the stand ♦

into the front recesses

17

on

the underside of the device until the stand audibly locks into place.

Find a suitable set-up location for the device (see also the section ♦

Requirements for the set-up location).

Providing mains power

Insert the mains connection cable ♦

16

power plug into a socket. The time of

day will be shown in the display

3

( o’clock).

VHF wire antenna

Unwind the wire antenna ♦

15

completely for VHF reception.

11

Handling and operation

SKRD 30 A1

GB

Handling and operation

In this section you receive important information for the handling and operation

of the device.

Switching On and Oﬀ

After the device has been connected to the power supply it is already switched

on. Via the On/Oﬀ

4

button you switch between the operational modes clock/

standby operation and radio.

NOTICE

The On/Oﬀ switch ►

4

does not disconnect the device completely from the

mains power. The device also consumes power when in Standby-Mode.

To completely disconnect the device from the mains power the mains

power cable plug

16

must be pulled from the mains socket.

Basic settings

After the device has been connected to the mains power supply it shows the time

of day and the day of the week in the display

3

. The device is in the operational

mode clock/standby operation.

Activating the settings menu

To activate the settings menu, whilst in the operational mode clock/standby operation,

press the Bass/AMS/Mode

7

button. The time of day, shown in the display

3

,

begins to blink. Each further actuation of the Bass/AMS/Mode

7

button switches

to the next setting potential. The menu item sequence is:

Setting the time of day ▯

Setting the date ▯

Setting the memory function ▯

Setting the time of day format ▯

Setting automatic display dimming. ▯

Setting the display dimming’s switch on and oﬀ time. ▯

NOTICE

The setting menu ends automatically if you do not actuate any buttons for ►

approx. 15 seconds. The executed setting is saved.

12

Handling and operation

SKRD 30 A1

GB

Setting the time

Prerequisite: The device is in the operational mode clock/standby operation.

Press the Bass/AMS/Mode ♦

7

button once. The time of day indicator

begins to blink.

Set with the buttons Tune+ ♦

13

and Tune–

12

the current time of day. With

each button press the time of day changes by one minute. Holding down

the respective button for more than 2 seconds starts the speed setting.

Press the Bass/AMS/Mode ♦

7

button again to save the current setting and

move to the next menu item.

NOTICE

The time of day will revert back to ►

o'clock if the device is disconnected

from the mains power supply and no battery is inserted or if the battery is too

weak.

Setting the date

Prerequisite: The device is in the operational mode clock/standby operation.

Press the Bass/AMS/Mode ♦

7

button twice. The date indicator begins to

blink.

Set with the buttons Tune+ ♦

13

and Tune–

12

the current date. With each

button press the date is changed by one day. The weekday indicator changes

automatically. Holding down the respective button for more than 2 seconds

starts the speed setting.

Press the Bass/AMS/Mode ♦

7

button again to save the current setting and

move to the next menu item.

NOTICE

The date will revert back to ►

, if the device is disconnected from the

mains power supply and no battery is inserted or if the battery is too weak.

Setting the memory function

You can set up to 10 date reminders to which an automatic reminder will be

triggered. The function SdA (SdA=Special Day Alert) is useful as a reminder, for

example, of birthdays or other recurring events. The reminder occurs every year

on the same date.

Prerequisite: The device is in the operational mode clock/standby operation.

Press the Bass/AMS/Mode ♦

7

button three times. The current setting of the

selected reminder date is shown alternating with the indicator . Next to

the indicator

is the number of the memory slot for that date. Possible

reminders are

to .

13

Handling and operation

SKRD 30 A1

GB

Select with the buttons Preset+ ♦

11

and Preset–

10

the memory slot for the

date to be set.

Set with the buttons Tune+ ♦

13

and Tune–

12

the date for this memory slot.

With each button press the date is changed by one day. Holding down the

respective button for more than 2 seconds starts the speed setting.

NOTICE

Press the Dimmer/AOT ►

5

button if you want to switch oﬀ the date

for the currently set date. The reminder now occurs every year on the

same date. . To deactivate the memory function, programme in a date

that lies in the past.

Press the button Lock/Mem. ♦

6

to set the time of day at which the reminder

function is to be triggered. The setting is carried out with the buttons Tune+

13

and Tune–

12

on the hour between 00 and 23. This setting applies to all

programmed reminder dates

Press the Bass/AMS/Mode ♦

7

button again to save the current setting and

move to the next menu item.

Setting the time of day format

Prerequisite: The device is in the operational mode clock/standby operation.

Press the Bass/AMS/Mode ♦

7

button four times. The current setting for the

time of day format is shown ( =24 hour format or =12 hour format).

With the button Tune+ ♦

13

set the time of day format to if you want a time

of day display in the 24 hour format .

With the button Tune– ♦

12

set the time of day format to if you want a time

of day display in the 12 hour format .

Press the Bass/AMS/Mode ♦

7

button again to save the current setting and

move to the next menu item.

Setting automatic display dimming.

Prerequisite: The device is in the operational mode clock/standby operation.

Press the Bass/AMS/Mode ♦

7

button ﬁ ve times. The current setting for the

automatic display dimming is shown ( = function switched on or =

function switched oﬀ ).

With the button Tune+ ♦

13

set the function if the display illumination

should be switched on and oﬀ at a setable time.

With the button Tune– ♦

12

set the function if the display illumination is

to be switched on permanently.

Press the Bass/AMS/Mode ♦

7

button again to save the current setting and

move to the next menu item.

14

Handling and operation

SKRD 30 A1

GB

Setting the display dimming’s switch on and oﬀ time

Prerequisite: The device is in the operational mode clock/standby operation.

Press the Bass/AMS/Mode ♦

7

button six times. The current setting for the

display dimming switch on time is shown (

= display illumination

dims at 11 o’clock pm (23:00)).

Set with the buttons Tune+ ♦

13

and Tune–

12

the desired time of day. With

each button press the time of day changes by one minute. Holding down

the respective button for more than 2 seconds starts the speed setting.

Press the Bass/AMS/Mode ♦

7

button again to save the current setting

and move to the switch oﬀ time setting. The current setting for the display

dimming switch oﬀ time is shown ( = display illumination switches

on again at 6 o’clock am (6:00)).

Set with the buttons Tune+ ♦

13

and Tune–

12

the desired time of day. With

each button press the time of day changes by one minute. Holding down

the respective button for more than 2 seconds starts the speed setting.

Press the Bass/AMS/Mode ♦

7

button again to save the current setting

and exit the setting menu. The current time of day is shown.

Kitchen timer

The device has a convenient kitchen timer with which, for example, cooking and

baking times can be monitored. The programmable time range of the kitchen

timer lies between 1 minute and 23 hours, 59 minutes.

Setting the kitchen timer

Press the Snooze/Timer ♦

14

button. The display shows . In the right

upper corner of the display

3

the saucepan symbol for the kitchen timer is

superimposed.

Turn the VOLUME ♦

14

knob to set the time range for the kitchen timer.

Turning in a clockwise direction increases the time; turning in a counter

clockwise direction reduces the time.

NOTICE

If, during the setting, approx. 15 seconds passes without any changes ►

taking place the device reverts back to the previous operational mode.

15

Handling and operation

SKRD 30 A1

GB

Starting the kitchen timer

After setting the time press the button Snooze/Timer ♦

14

again. The displayed

time begins to run backwards. In the right, upper corner of the display

3

a

backwards running clock is superimposed.

NOTICE

If, during the operation of the kitchen timer, another function is selected ►

the display of the remaining time fades out. The saucepan symbol and

the backwar

d running clock in the right, upper corner of the display

3

,

however, continue to be shown. Press the button Snooze/Timer

14

again to

allow the remaining time of the kitchen timer to be shown once more.

30 seconds before the kitchen timer run time has expired the device begins to

acoustically indicate, with individual signal tones, the arrival of the set time. Thereby

the interval between the individual tones becomes shorter and shorter. When the

set time has arrived the kitchen timer’s alarm signal sounds as a continuous tone.

Press the button Snooze/Timer ♦

14

to switch oﬀ the kitchen timer alarm signal.

Pausing the kitchen timer.

Press, while the kitchen timer is running, the button Snooze/Timer ♦

14

. The

kitchen timer is paused. The displayed remaining time begins to blink.

NOTICE

After approx. 15 seconds the device reverts back to the previous operational ►

mode. Press the button Snooze/Timer

14

again to allow the remaining time

of the kitchen timer to be shown once more.

To restart the kitchen timer press the button Snooze/Timer ♦

14

again. The

kitchen timer restarts.

To switch oﬀ the kitchen timer before the set time has expired press and hold ♦

down the Snooze/Timer

14

button for at least 2 seconds.

16

Handling and operation

SKRD 30 A1

GB

Programming the kitchen timer

You can preprogramme the kitchen timer with the most frequently used times so

that it is not necessary to continually reenter them. Up to 10 times can be prepro-

grammed. All 10 memory slots are preprogrammed with 10 minutes as standard.

For the programming of the kitchen timer proceed as follows:

Press the button Snooze/Timer ♦

14

to activate the kitchen timer.

Turn the VOLUME ♦

14

knob to set the time to be programmed. Turning in a

clockwise direction increases the time; turning in a counter clockwise direc-

tion reduces the time.

Press the button Lock/Mem. ♦

6

to activate the timer selection. Under the

kitchen timer saucepan symbol a blinking is shown.

Select with the buttons Preset+ ♦

11

and Preset–

10

a memory slot between

and for the timer that is to be set.

Press the button Lock/Mem. ♦

6

again to programme the set time on the

selected memory slot. The blinking under the saucepan symbol is now show-

ing constantly.

Repeat the process for the other memory slots. ♦

Accessing the kitchen timer

To access a programmed time for the kitchen timer proceed as follows:

Press the button Snooze/Timer ♦

14

to activate the kitchen timer.

Select with the buttons Preset+ ♦

11

and Preset–

10

the desired timer between

and .

Press the button Snooze/Timer ♦

14

again to start the kitchen timer.

17

Handling and operation

SKRD 30 A1

GB

Programming alarm wake times

The device has two alarms available. All settings for both alarms can be carried

out independently from each other. You can select whether at the programmed

time an alarm tone shall sound or the radio shall play.

NOTICE

If, during alarm wake programming, no button is pressed for approx. ►

15 seconds the alarm will activate with the current settings.

Prer

equisite: The device is in the operational mode clock/standby operation.

To set the wake time proceed as follows:

Press the Alarm1 button ♦

8

or the Alarm2 button

9

. The set wake time

of the respective alarm is shown blinking in the display

3

and the indicator

and/or appears. The weekday on which this alarm is to be activated is

shown above the time indicator.

Set with the buttons Tune+ ♦

13

and Tune–

12

the desired wake time. With

each button press the wake time changes by one minute. Holding down the

respective button for more than 2 seconds starts the speed setting.

Press the button Dimmer/AOT ♦

5

to switch between the weekday combina-

tions Mo-Fr, Sa-Su or Mo-Su. The respective selected combination is shown

above the wake time.

Press and hold down the button Dimmer/AOT ♦

5

for at least 2 seconds to

switch between the weekday combinations and individual weekday setting

alternatives.

NOTICE

With the individual weekday setting alternative you switch between ►

the days of the week with t

he button Dimmer/AOT

5

.

Press the Alarm1 button ♦

8

and/or the Alarm2 button

9

to save the set

weekday combination and move to the setting of the alarm type (tone or radio).

Wake with alarm tone

Prerequisite: The device is in the operational mode clock/standby operation.

To select “Alarm tone” for the respective alarm press the Alarm1 button ♦

8

or the Alarm2 button

9

several times in succession until, in the display

3

,

the symbol

appears.

18

Handling and operation

SKRD 30 A1

GB

Waken with radio

If you want to be woken by the radio, before activating the wake time carry out

the following settings:

Switch the radio on by pressing the On/Oﬀ ♦

4

button.

Select the station with which you want to be woken (see section ♦

Station setting).

With the VOL

UME ♦

14

knob set the desired volume (see section

Volume settings).

Switch the radio oﬀ by pressing the On/Oﬀ ♦

4

button.

To select “Radio” for the respective alarm press the Alarm1 button ♦

8

or

the Alarm2 button

9

several times in succession until, in the display

3

, the

symbol

appears.

Switching the alarm oﬀ

Prerequisite: The device is in the operational mode clock/standby operation.

To switch oﬀ the respective alarm press the Alarm1 button ♦

8

or the Alarm2

button

9

several times in succession until no symbols are shown in the

display

3

.

When the wake time has arrived

With the setting “Wake with alarm tone” a fourfold signal tone sounds

in intervals of 2 seconds. The volume of the signal tone will continually increase

until the maximum volume has been reached. The duration of the wake signal is

restricted to 10 minutes.

With the setting “Wake with radio” the radio will switch on. The previously

selected station will be activated for a maximum of 60 minutes at the set volume.

Press the button Snooze/Timer ♦

14

to activate a repeat wake after 9 minutes.

NOTICE

The repeat wake function is possible up to 60 minutes after the set wake ►

time has arrived.

Press the Alarm1 button

♦

8

or the Alarm2 button

9

to end the current

alarm.

NOTICE

The alarm becomes active again when the next wake time has arrived ►

(i.e. on the next day).

Pagina se încarcă ...

Silvercrest SKRD 30 A1 Operating Instructions Manual

Silvercrest SKRD 30 A1 Operating Instructions Manual

Lucrări conexe

Alte documente