Tesla WF81493M Manual de utilizare

Categorie
Mașini de spălat
Tip
Manual de utilizare
Product images are for illustrative purposes only and may differ from the actual product.
WASHING
MACHINE
WF81493M
User Manual
SRB
HRGR RO SLOENG
BiH/
CG
3
ENG
SAFETY INSTRUCTIONS
For your safety,the information in this manual must be followed to minimize the risk of fire or explosion,
electric shock, or to prevent property damage, personal injury or loss of life.
Explanation of the symbols:
WARNING!
This combination of symbol and signal word indicates a potentially dangerous situation which may result in
death or serious injuries unless it’s avoided.
CAUTION!
This combination of symbol and signal word indicates a potentially dangerous situation which may result in
slight or minor injuries or damage to property and the environment.
NOTE
This combination of symbol and signal word indicates a potentially dangerous situation which may result in
slight or minor injuries.
WARNING!
The electric shock!
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be
reused.
Before any maintenance the device, unplug the appliance from the mains.
Always unplug the machine and turn off the water supply after use. The max. inlet water pressure, in
pascals. The min. inlet water pressure, in pascals.
To ensure your safety, power plug must be inserted into an earthed three-pole socket. Check carefully and
make sure that your socket is properly and reliably earthed.
Make sure that the water and electrical devices must be connected by a qualified technician in accordance
with the manufacturer’s instructions and local safety regulations.
Pull out its plug from the power socket before cleaning or maintenance.
Do not use any socket with rated current less than that of appliance. Never pull out power plug with wet
hand.
Please remember to disconnect water and power supply immediately after the clothes are washed.
Risk to children!
EN countries: the appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
Children of less than 3years should be supervised to ensure that they do not play with appliance.
Animals and children may climb into the machine. Check the machine before every operation.
Kids should be supervised that they do not play with the appliance.
Glass door may be very hot during the operation. Keep kids and pets far away from the machine during
the operation very wet rooms as well as in the rooms with explosive or caustic gas.
Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may
result.
Risk of explosion!
Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible
4
ENG
or explosive substances( such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.)
This may result in fire or explosion.
The washer dryer is not to be used if industrial chemicals have been used for cleaning.
The exhaust air must not be discharged into a flue which is for exhausting fumes from appliances burning
gas or other fuels.
Before hand thoroughly rinse items of washing by hand.
CAUTION!
Installing the product!
This washing machine is for indoor use only.
It isn’t intended to be built-in using.
The openings must not be obstructed by a carpet.
Washing machine shall not be installed in bath room or very wet rooms as well as in the rooms with
explosive or caustic gases.
The washing machine with single inlet valve only can be connected to the cold water supply. The product
with double inlet valves should be correctly connected to the hot water and cold water supply.
Plug must be accessible after installation.
The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the
opposite side to that of the washer dryer.
The appliance shall not be installed at a humid place.
Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may
result.
Risk of damaging appliance!
Your product is only for home use and is only designed for the textiles suitable for machine washing.
Do not climb up and sit on top cover of the machine.
Do not lean against machine door.
Cautions during Handling Machine:
1. Transport bolts shall be reinstalled to the machine by a specialized person.
2. The accumulated water shall be drained out of the machine.
3. Handle the machine carefully. Never hold each protruded part on the machine while lifting. Machine
door can not be used as the handle during the conveyance.
4. This appliance is heavy. Transport with care.
5. That the hands shall not be inserted into running water extracting tub.
Please do not close the door with excessive forces. If it is found difficult to close the door, please check if
the clothes are put in or distributed well.
It is forbidden to wash carpets.
Operating the appliance!
Before using the wash machine, the product shall be calibrated.
Before washing the clothes at first time, the product shall be operated in one round of the whole
procedures without the clothes inside.
Flammable and explosive or toxic solvents are forbidden. Gasoline and alcohol etc.Shall not be used as
detergents. Please only select the detergents suitable for machine washing, especially for drum.
Make sure that all pockets are emptied. Sharp and rigid items such as coin,brooch,nail,screw or stone etc.
may cause serious damages to this machine.
Please check whether the water inside the drum has been drained before opening its door.Please do not
open the door if there is any water visible.
Be careful of burning when the product drains hot washing water.
After the program is completed, please wait for two minutes to open the door.
Never refill the water by hand during washing.
If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair
care products. it be placed in a tumble dryer they should first be washed in hot water with extra detergent ,
this will reduce, but not eliminate, the hazard.
Adequate ventilation has to be provided to avoid the back flow of gases into the room from appliances
burning other fuels, including open fires.
Do not dry unwashed items in the appliance.
5
ENG
Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot
removers,turpentine,waxes and wax removers should be washed in hot with an extra amount of detergent
before being dried in the appliance.
Items such as foam rubber (latex foam), shower caps, water proof textiles, rubber backed articles and
clothes or pillows fitted with foam rubber pads should not be dried in the machine.
Fabric softeners, or similar products, should be used as specified by the fabric softener instructions.
The machine whose lid can be opended during water extraction,that it takes 15s or more for complete
stop of water extracting chamber tub.
The final part of a washer dryer cycle occurs without heat (cool down cycle) to ensure that the items are left
at a temperature that ensures that the items will not be damaged.
Remove all objects from pockets such as lighters and matches before use the appliance.
WARNING: Never stop a washer dryer before the end of the drying cycle unless all items are quickly
removed and spread out so that the heat is dissipated.
Packaging/Old appliance
This marking indicates that this product should not be disposed with other household wastes throughout the
EU.To prevent possible harm to the environment or human health from uncontrolled waste disposal,recycle
it responsibly to promote the sustainable reuse of material resources.To return your used device, please use
the collection systems or contact the retailer where the product was purchased. They return and can take this
product for environmental safe recycling.
6
ENG
INSTALLATION
Product Description
Accessories
NOTE
The product line chart is for reference only, please refer to real product as standard.
Transport hole plug Supply hose
cold water
Supply hose hot
water (optional)
Drain hose support
(optional)
Owner’s manual
Installation area
WARNING!
Stability is important to prevent the product from wandering!
Make sure that the product should not stand on the power cord.
w
w
W> 20mm
Top cover
Water supply hose
Detergent dispenser
Door
Control panel
Power supply cord
Drum
Service filter
Drain hose
7
ENG
Before installing the machine, the location characterized as follows shall be
selected:
1. Rigid, dry, and level surface
2. Avoid direct sunlight
3. Sufficient ventilation
4. Room temperature is above 0 °C
5. Keep far away from the heat resources such as coal or gas.
Unpacking the washing machine
WARNING!
Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
There is a risk of suffocation! Keep all packaging well away from children.
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing. Make sure the small triangle foam is removed
with the bottom one together. If not, lay the unit down with side surface, then remove the small foam
from the unit bottom manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Remove transport bolts
WARNING!
You must remove the transport bolts from the backside before using the product.
You’ll need the transport bolts again if you move the product , so make sure you keep them in a safe place.
Please take the following steps to remove the bolts:
1. Loosen 4 bolts with spanner and then remove them.
2. Stop the holes with transport hole plugs.
3. Keep the transport bolts properly for future use.
Levelling the washing machine
WARNING!
The lock nuts on all four feet must be screwed tightly against the housing.
1. Check if the legs are closely attached to the cabinet. If not, please turn them to their original positions
tighten the nuts.
2. Loosen the lock nut turn the feet until it closely contacts with the floor.
3. Adjust the legs and lock them with a spanner, make sure the machine is steady.
1
2
3 4
Raise Lower
Foot
Lock nut
8
ENG
Min.60cm
100cm
Max.
Connect Water Supply Hose
WARNING!
To prevent leakage or water damage, follow the instructions in this chapter!
Do not kink, crush, modify or sever water inlet hose.
For the model equips hot valve,connect it to hot water tap with hot water supply hose. Energy
consumption will decrease automatically for some program.
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1. Connection between ordinary tap and inlet hose.
Do not kink or protract the drain hose.
Position drain hose properly ,otherwise damage might result of water leakage.
There are two ways to place the end of drain hose:
1
2
3
4
Slide bushing
Slide bushing
Clamp nut
Loosen clamp nut and
four bolts
Tap with threads and inlet hose Special tap for washing machine
1. Put the hose into the water drain 2. Connect it to a drain pipe.
Press slide bushing insert inlet
hose into connecting base
Tighten clamp nut Tighten clamp nut
Water drain
Water Inlet valve
Water supply hose
2. Connection between screw tap and inlet hose.
Connect the other end of inlet pipe to the inlet
valve at the backside of product and fasten the pipe
tightly clockwise.
Drain Hose
WARNING!
9
ENG
WARNING!
When installing drain hose, fix it properly with a rope.
If drain hose is too long, do not force it into washing machine as it will cause abnormal noises.
CAUTION!
Before washing, please make sure it’s installed properly.
Before washing at first time, the washing machine shall be operated in one round of the whole procedures
without clothes in as follows.
1. Before Washing
Hose
Retainer
NOTE
If the machine has drain hose support, please install it like the following.
NOTE
Detergent need to be added in “case I“ after selecting pre-washing for machines with this function.
Ma x .100 c
Mi n .60c m
Mi n .60c m
Ma x .100 cm
Trough
Bind
OPERATIONS
Quick Start
Plug in Open tap Load Close door Add detergent
Main
wash
Softener
Prewash
It’s recommend to calibrate the wash machine so that can serve you better.
1. Empty the wash machine;
2. Plug in;
3. Power on the wash machine and press “Delay” and “Speed” at the same time within 10 seconds then
display “t19”
4. Press
to start the wash machine and wait till display “****”
CALIBRATION
10
ENG
3. After Washing
Buzzer beep or “End” on display.
The working condition of the washer should be (0-40) °C.If used under 0 °C,the inlet valve and draining
system may be damaged. If the machine is placed under condition of 0 °C or less, then it should be
transferred to normal ambient temperature to ensure the water supply hose and drain hose are not frozen
before use.
Please check the labels and the explanation of using detergent before wash. Use non-foaming or
less-foaming detergent suitable for machine washing properly.
Before Each Washing
Check the label
Put small clothes into the pillow slip
Take out the items out of the pockets
Turn easy-pilling and long-pile fabric
inside out
Knot the long strips, zip or button
Separate clothes with different textures
WARNING!
When washing a single clothes, it may easily cause great eccentricity and give alarm due to great
unbalance. Therefore it is suggested to add one or two more clothes to be washed together so that
draining can be done smoothly.
Don’t wash clothes that have been in touch with kerosene, gasoline, alcohol and other flammable materials.
NOTE
If default is selected, step 3 can be skipped.
The function button line chart is for reference only, please refer to real product as standard.
2. Washing
Power On Select function or defaultSelect program Start up
11
ENG
Prewash detergent
Main wash detergent
Softener
Detergent Dispenser
Pull out the dispenser
CAUTION!
Detergent only need to be added
in “case I“ after selecting pre-
washing for machines with this
function.
Program
Cotton
Synthetic
Baby Care
Jeans
Mix
20C
Rinse & Spin
Spin Only
NOTE
As for the agglomerated or ropy detergent or additive, before they are poured into the detergent box, it
is suggested to use some water for dilution to prevent the inlet of detergent box from being blocked and
overflowing while filling water.
Please choose suitable type of detergent for the various washing temperature to get the best washing
performance with less water and energy consumption
Program
Intensive
ECO 40-60
Delicate
Wool
Sport Wear
Rapid 45’
Quick 15’
Means must Means optional
Control Panel
Cotton
Synthetic
Quick 15’
Rapid 45’
Sport Wear
Wool
Delicate
ECO 40-60
Intensive
Baby Care
Jeans
Mix
20ºC
Rinse & Spin
Spin Only
SpeedWash
My Cycle
Delay Temp. Speed Wash Extra Rinse Pre Wash
ON/OFF
Start/Pause
Press 3 sec to reload
Spin
12
ENG
The chart is for reference only, Please refer to real product as standard.
1. On/Off
Product is switched on or off.
2. Start/Pause
Press the button to start or pause the washing
cycle.
3. Option
This allows you to select an additional function
and will light when selected.
4. Program
Available according to the laundry type.
5. Display
The display shows the settings, estimated
time remaining, options, and status messages
for your washer. The display will remain on
through the cycle.
NOTE
Option
D
CB
A
E
I
J
G
H
FK
1
2
0
0
A
Delay
F
Pre Wash
B
Door Lock
G
Extra Rinse
C
Child Lock
H
Speed Wash
D
Reload
I
Spin Speed
E
My Cycle
J
Rate Of Progress (Pre wash- Wash-Rinse-
Spin)
K
Wash Time
Error
Delay Time
End
Pre Wash
The Prewash function can get an extra wash before main wash,it is suitable for washing the dust rises
to surface of the clothes; You need to put detergent into the Case (I) when select it.
Choose the Programme Setting time Start
Delay
Set the Delay function:
1. Select a programme
2. Press the Delay button to choose the time(the delaying time is 0-24 H.)
3. Press [Start/Pause] to commence the delay operation
Cancel the Delay function:
Press the [Delay] button until the display be 0H. It should be pressed before starting the programme.
If the programme already started, should press the [On/Off] button to reset the programme.
If there is any break in the power supply while the machine is operating, the selected program will be stored
in special memory when the power is restarted, press the [On/Off] button, the program will continue.
CAUTION!
13
ENG
Extra Rinse
The laundry will undergo extra rinse once after you select it.
Speed Wash
The function can decrease the washing time.
Choose the Programme
My Cycle
To memory the frequently used programme.
After choosing the programme and setting the options, press [Speed] 3 sec. before start to wash.
The default setting course is Cotton.
Press [Start/Pause] 3sec. Reload the clothes
Clothes
Start
Reload
This operation can be executed during the washing progress. When the drum is
still rolling and there is large amount of water with high temperature in the drum. The state is unsafe
and the door cannot be opened forcefully. To press
[Start/Pause] for 3 sec. to reload, and start the clothes adding in the midway
function. Please follow the steps as bellow:
1. Wait until the drum stops rotation.
2. The door lock is unlocked.
3. Close the door when the clothes are reloaded and press the [Start/Pause] button.
Press [Extra Rinse] and [Pre Wash] 3 sec. till buzzer beeps.
Child Lock
To avoid mis operation by children.
When child lock is activated and program starts, child lock indicator will switch on, and the CL and remaining
time on the display are alternately displayed in 0.5s.
Press the other buttons will make child lock indicator flash for 3s. when program finish,CL and END alternate
for 10s in 0.5s, then the child lock lights flash for 3s
• Only press and hold the two button can release child lock, even power off, switch off and program end
• The “Child Lock” will lock all buttons except Power button and Child Lock button
• Please release child lock before selecting program and staring washing
CAUTION!
Extra
Rinse
Pre
Wash
After Muting the buzzer function, the sounds will not be activated any more.
Mute the buzzer
CAUTION!
Press the [Temp.]&[Spin] button for 3sec. the buzzer is mute.
To act the buzzer function, press the two buttons again for 3 seconds. The setting will be kept until
the next reset.
Temp. Spin
14
ENG
Other functions
Temp./Temperature
Press the button to regulate the temperature (Cold, 20°C, 30°C, 40°C, 60°C,90°C)
Spin
Press the button to change the spin speed.
0-600-800-1000-1200-1400
Program Default Speed (rpm)
Cotton
1400
Synthetic
1200
Baby Care
800
Jeans
1000
Mix
800
20C
1000
Rinse & Spin
1000
Spin Only
1000
Program Default Speed (rpm)
Intensive
800
ECO 40-60
1400
Delicate
600
Wool
600
Sport Wear
800
Rapid 45’
800
Quick 15’
800
Programs
Programs are available according to the laundry type
Programs
Cotton
Hard-wearing textiles, heat-resistant textiles made of cotton or linen.
Synthetic
Wash synthetic articles, for example: shirts, coats, blending.
While washing the knitting textiles, detergent quantity shall be reduced
due to its loose string construction and easily forming bubbles.
Baby Care
Washing the baby’s clothes, it can make the baby’s wear cleaner and make
the rinse performance better to protect the baby skin.
Jeans
Specially for jeans.
Mix
Mixed load consisting of textiles made of cotton and synthetics.
20C
20C default, can choose cold water.
Rinse&Spin
Extra rinse with spin.
Spin Only
Extra spin with selectable spin speed.
Intensive
To increase the washing effects, washing time is increased.
ECO 40-60
This program is specially designed for washing duvet coats.
Default 40C,not selectable,suitabale for laundry washing at about
40C-60C.
Delicate
For delicate, washable textiles, e.g. made of silk, satin, synthetic fibres or
blended fabrics.
Wool
Hand or machine-washable wool or richwool textiles.Especially gentle wash
programme to prevent shrinkage, longer programme pauses (textiles rest
in wash liquor).
15
ENG
Sport Wear
Washing the activewear.
Rapid 45’
This programme is suitable for washing not very dirty clothes, save more
energy and washing.
Quick 15’
Extra short programme approx, suitable for lightly soiled washing as a small
amounts of laundry.
Washing Programs Table
Program Load (kg) Temp. (°C) (Default) Default Time
Cotton
8.0 40 3:39
Synthetic
4.0 40 3:17
Baby Care
8.0 60 1:42
Jeans
8.0 30 1:35
Mix
8.0 40 1:20
20C
8.0 20 1:01
Rinse&Spin
8.0
- 0:20
Spin Only
8.0
- 0:12
Intensive
8.0 40
3:48
ECO 40-60
8.0
-
3:32
Delicate
8.0
30
0:50
Wool 2.0
40
1:07
Sport Wear
8.0
20
0:45
Rapid 45’
2.0
40
0:45
Quick 15’
2.0
Cold
0:15
Concerning to Regulation(EU) No 1061/2010
The EU energy efficiency class is: A+++
Energy test program: Intensive 60/40C; Speed:The highest speed;
Other as the default.
Half load for 8.0 Kg machine: 4.0 Kg.
Concerning to Regulation(EU) 2019/2023
The EU energy efficiency class is: B
Energy test program: ECO 40-60. Other as the default.
Half load for 8.0 Kg machine: 4.0 Kg.
Quarter load for 8.0 Kg machine:2.0 Kg.
The parameters in this table are only for user’s reference. The actual parameters maybe
different with the parameters in above mentioned table.
NOTE
16
ENG
WARNING!
Before your maintenance starts, please unplug the machine and close the tap.
Cleaning The Cabinet
Proper maintenance on the washing machine can extend its working life.
The surface can be cleaned with diluted non-abrasive neutral detergents
when necessary. If there is any water overflow, use the wet cloth to wipe it off
immediately. No sharp items are allowed.
NOTE
Formic acid and its diluted solvents or equivalent are forbidden, such as
alcohol, solvents or chemical products,etc.
MAINTENANCES
Cleaning And Care
Cleaning The Drum
The rusts left inside the drum by the metal articles shall be removed immediately with chlorine-free
detergents. Never use steel wool.
NOTE
Don’t put laundry in the washing machine during the
drum cleaning.
Cleaning The Door Seal and Glass
Wipe the glass and seal after each wash
to remove lint and stains. If lint builds up it can cause leaks.
Remove any coins, buttons and other objects from the
seal after each wash.
d.
Cleaning The Inlet Filter
NOTE
NOTE
Inlet filter must be cleaned if there is less water.
• If the brush is not clean, you can pull out the filter washed separately;
• Reconnect, turn on the tap.
Washing the filter in the tap
1. Close the tap.
2. Remove the water supply hose from the tap.
3. Clean the filter.
4. Reconnect the water supply hose.
Washing the filter in washing machine:
1. Screw off the inlet pipe from the backside of the
machine.
2. Pull out the filter with long nose pliers and reinstall it
back after being washed.
3. Use the brush to clean the filter. 4.Reconnect the inlet
pipe.
17
ENG
A
1 2 3 4
Pull out the dispenser
drawer by pressing the
button marked with “A
Clean the dispenser
drawer under water
Clean inside the recess
with an old toothbrush
Insert the dispenser
drawer
Clean The Detergent Dispenser
NOTE
Do not use alcohol,solvents or chemical products to clean the machine.
1. Press down the arrow location on softener cover inside the dispenser drawer.
2. Lift the clip up and take out softener cover and wash all grooves with water.
3. Restore the softener cover and push the drawer into position.
1
2
3
6
54
Open the lower cover cap
Open the filter by turning
counter clockwise
Rotate 90° and pull out
the emergency drain hose,
and take off the hose cap
Emergency
drain hose
Remove extraneous matter
After water runs out,
reset the drain hose
Close the lower cover cap
Cleaning The Drain Pump Filter
WARNING!
• Be careful of the hot water!
• Allow detergent solution to cool down.
• Unplug the machine to avoid electrical shock before washing.
• Drain pump filter can filter the yarns and small foreign matters from the washing.
• Clean the filter periodically to ensure the normal operation of washing machine.
18
ENG
Description Reason Solution
Washing machine
cannot start up
Door is not closed properly Restart after the door is closed
Check if the clothes are stuck
Door can’t be opened Washers safety protection
design is working
Disconnect the power, restart the product
Water leakage The connection between
inlet pipe or outlet hose is
not tighten
Check and fasten water pipes
Clean up outlet hose
Detergent residues in
the box
Detergent is dampened or
agglomerated
Clean and wipe the detergent box
Indicator or display does
not light
Disconnect the power
PC board or harness has
connection problem
Check if the power is shut down and the
power plug is connected correctly
Abnormal noise Check if the fixing (bolts) have been removed
Check it’s installed on a solid and level floor
The start of the appliance does not work or it stops during operation.
First try to find a solution to the problem, If not, contact the service centre.
TROUBLE SHOOTING
Description Reason Solution
Door is not closed properly Restart after the door is closed
Check if the clothes is stuck
Water injecting problem
while washing
Check if the water pressure is too low
Straighten the water pipe
Check if the inlet valve filter is blocked
Overtime water draining Check if the drain hose is blocked
Water overflow Restart the washer
Others Please try again first, call up service line if there
are still troubles
NOTE
After the check, activate the appliance. If the problem occurs or the display shows other
alarm codes again, contact the service.
CAUTION!
Make sure that valve cap and emergency drain hose are reinstalled properly, cap plates should be
inserted aligning to hole plates otherwise water may leak.
Some machines don’t have emergency drain hose, so step 2 and step 3 can be skipped. Rotate lower
cover cap directly to make water run into basin.
When the appliance is in use and depending on the programme selected there can be hot water in the
pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished
the cycle, and is empty. When replacing the cover, ensure it is securely re-tightened.
19
ENG
Technical Specifications
Power Supply 220-240V~,50Hz
MAX.Current 10A
Standard Water Pressure 0.05MPa~1MPa
Washing Capacity 8.0kg
Dimension (WxDxHmm) 595x565x850
Net Weight 68kg
Rated Power 2000W
Product Fiches
D
Trade mark
Model identifier WF81493M
Rated capacity in kg of cotton laundry 8
Energy efficiency class on a scale from A+++ (most efficient) to D (least efficient) A+++
Energy consumptior 175 kwh per year,based on 220 standard washing cycles for Intensive programmes
at 60 °C and 40 °C at full and partialload, and the consumption of the low-power modes. Actual energy
consumption will depend on how the appliance is used.
Energy consumption of the Intensive 60°C programme at full load 0.82kwh
Energy consumption of the Intensive 60°C programme at partialload 0.75kwh
Energy consumption of the Intensive 40°C programme at partialload 0.73kwh
Weighted power consumption of the off-mode 0.50W
Weighted power consumption of the left-on mode 1.00W
Water consumption 11000 litres per year, based on 220 standard washing cycles for Intensive
programmes at 60 °C and 40 °C at full and partial load. Actual water consumption will depend on how the
appliance is used.
Spin-drying efficiency class B on a scale from G (least efficient) to A (most efficient)
Maximum spin speed 1400
Remaining moisture content 53%
‘Intensive 60°C programme’ and the ‘Intensive 40°C programme’ are the standard washing programmes
to which the information in the label and the fiche relates, that these programmes are suitable to clean
normally soiled cotton laundry and that they are the most efficient programmes in terms of combined
energy and water consumption.
Programme time of Intensive 60°C programme at full load 280min
Programme time of Intensive 60°C programme at half load 270min
Programme time of Intensive40°C programme at half load 270min
Duration time of left-on mode -
Airborne acoustical noise emissions during washing phase 57dB
Product fiche concerning to Regulation (EU) No 1061/2010
20
ENG
Airborne acoustical noise emissions during spinning phase 79dB
‘Built-in’ washing machine No
Energy test program: Intensive 60/40; Speed: the highest speed; Other as the default.
Supplier’s name or trade mark:
Supplier’s address (
b
):
Model identifier: WF81493M
General product parameters:
Parameter Value Parameter Value
Rated capacity (
a
) (kg) 8.0 Dimensions in cm
Height 85
Width 60
Depth 57
EEI
w
(
a
) 60.0 Energy efficiency class (
a
) B
Washing efficiency index (
a
) 1.04 Rinsing effectiveness (g/kg) (
a
) 5.0
Energy consumption in
kWh per cycle, based on
the eco 40-60 pro-gramme.
Actual energy consump-
tion will depend on how
the appli-ance is used.
0.545
Water consumption in litre per
cycle, based on the eco 40-60
programme. Actual water con-
sumption will depend on how
the appliance is used and on the
hardness of the water.
48
Maximum temperature
inside the treated textile
(
a
) (°C)
Rated
capacity
34
Remaining moisture content
(
a
) (%)
Rated
capacity
53
Half 29 Half 53
Quarter 21 Quarter 53
Spin speed (
a
) (rpm)
Rated
capacity
1400
Spin-drying efficiency class (
a
) B
Half 1400
Quarter 1400
Programme duration (
a
)
(h:min)
Rated
capacity
3 : 38
Type free-standing
Half 2 : 48
Quarter 2 : 48
Airborne acoustical noise
emissions in the spinning
phase (
a
) (dB(A) re 1 pW)
76
Airborne acoustical noise
emis¬sion class (
a
) (spinning
phase)
B
Off-mode (W) 0.50 Standby mode (W) N/A
Delay start (W) (if
applicable)
4.00
Networked standby (W) (if
applicable)
N/A
Minimum duration of the guarantee offered by the supplier (
b
):
This product has been designed to release silver
ions during the washing cycle
NO
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140

Tesla WF81493M Manual de utilizare

Categorie
Mașini de spălat
Tip
Manual de utilizare