Tesla WF61063M Manual de utilizare

  • Bună ziua! Sunt asistentul tău virtual și am citit manualul de utilizare pentru mașinile de spălat Tesla WF60832M, WF61033M și WF61063M. Sunt aici pentru a te ajuta, deci te rog nu ezita să mă întrebi orice despre instalarea, funcțiile sau mentenanța acestora. Documentația acoperă instrucțiunile de siguranță, informații de instalare, programe de spălare, și sfaturi de curățare.
  • Pot folosi detergenți inflamabili în această mașină de spălat?
    Ce trebuie să fac înainte de a spăla rufele pentru prima dată?
    Este necesar să deconectez mașina de spălat înainte de curățare?
Product images are for illustrative purposes only and may differ from the actual product.
WASHING
MACHINE
WF60832M
WF61033M
WF61063M
User Manual
MKHRGRBG HU RO SLO SRBENG BiH/
CG
3
ENG
SAFETY INSTRUCTIONS
For your safety,the information in this manual must be followed to minimize the risk of fire or explosion,
electric shock, or to prevent property damage, personal injury or loss of life.
Explanation of the symbols:
WARNING!
This combination of symbol and signal word indicates a potentially dangerous situation which may result in
death or serious injuries unless it’s avoided.
CAUTION!
This combination of symbol and signal word indicates a potentially dangerous situation which may result in
slight or minor injuries or damage to property and the environment.
NOTE
This combination of symbol and signal word indicates a potentially dangerous situation which may result in
slight or minor injuries.
WARNING!
The electric shock!
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be
reused.
Before any maintenance the device, unplug the appliance from the mains.
Always unplug the machine and turn off the water supply after use. The max. inlet water pressure, in
pascals. The min. inlet water pressure, in pascals.
To ensure your safety, power plug must be inserted into an earthed three-pole socket. Check carefully and
make sure that your socket is properly and reliably earthed.
Make sure that the water and electrical devices must be connected by a qualified technician in accordance
with the manufacturer’s instructions and local safety regulations.
Risk to children!
EN countries: the appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
Children of less than 3years should be supervised to ensure that they do not play with appliance.
Animals and children may climb into the machine. Check the machine before every operation.
Kids should be supervised that they do not play with the appliance.
Glass door may be very hot during the operation. Keep kids and pets far away from the machine during
the operation very wet rooms as well as in the rooms with explosive or caustic gas.
Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may
result.
Plug must be accessible after installation.
Risk of explosion!
Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible
or explosive substances( such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.)
This may result in fire or explosion.
Before hand thoroughly rinse items of washing by hand.
4
ENG
CAUTION!
Installing the product!
This washing machine is for indoor use only.
It isn’t intended to be built-in using.
The openings must not be obstructed by a carpet.
Washing machine shall not be installed in bath room or very wet rooms as well as in the rooms with
explosive or caustic gases.
The washing machine with single inlet valve only can be connected to the cold water supply. The product
with double inlet valves should be correctly connected to the hot water and cold water supply.
Plug must be accessible after installation.
Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may
result.
Risk of damaging appliance!
Your product is only for home use and is only designed for the textiles suitable for machine washing.
Do not climb up and sit on top cover of the machine.
Do not lean against machine door.
Cautions during Handling Machine:
1. Transport bolts shall be reinstalled to the machine by a specialized person.
2. The accumulated water shall be drained out of the machine.
3. Handle the machine carefully. Never hold each protruded part on the machine while lifting. Machine
door can not be used as the handle during the conveyance.
4. This appliance is heavy. Transport with care.
Please do not close the door with excessive forces. If it is found difficult to close the door, please check if
the clothes are put in or distributed well.
It is forbidden to wash carpets.
Operating the appliance!
Before washing the clothes at first time, the product shall be operated in one round of the whole
procedures without the clothes inside.
Flammable and explosive or toxic solvents are forbidden. Gasoline and alcohol etc.Shall not be used as
detergents. Please only select the detergents suitable for machine washing, especially for drum.
Make sure that all pockets are emptied. Sharp and rigid items such as coin,brooch,nail,screw or stone etc.
may cause serious damages to this machine.
Please check whether the water inside the drum has been drained before opening its door.Please do not
open the door if there is any water visible.
Be careful of burning when the product drains hot washing water.
Never refill the water by hand during washing.
After the program is completed, please wait for two minutes to open the door.
Packaging/Old appliance
This marking indicates that this product should not be disposed with other household wastes throughout the
EU.To prevent possible harm to the environment or human health from uncontrolled waste disposal,recycle it
responsibly to promote the sustainable reuse of material resources.To return your used device, please use the
collection systems or contact the retailer where the product was purchased. They return and can take this
product for environmental safe recycling.
5
ENG
INSTALLATION
Product Description
Accessories
Top cover
Water supply hose
Detergent dispenser
Door
Control panel
Power supply cord
Drain hose
Service filter
Drum
NOTE
The product line chart is for reference only, please refer to real product as standard.
Transport hole plug Supply hose
cold water
Supply hose hot
water (optional)
Drain hose support
(optional)
Owner’s manual
Installation area
WARNING!
Stability is important to prevent the product from wandering!
Make sure that the product should not stand on the power cord. w
w
W> 20mm
6
ENG
Before installing the machine, the location characterized as follows shall be
selected:
1. Rigid, dry, and level surface
2. Avoid direct sunlight
3. Sufficient ventilation
4. Room temperature is above 0 °C
5. Keep far away from the heat resources such as coal or gas.
Unpacking the washing machine
WARNING!
Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
There is a risk of suffocation! Keep all packaging well away from children.
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing. Make sure the small triangle foam is removed
with the bottom one together. If not, lay the unit down with side surface, then remove the small foam
from the unit bottom manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Remove transport bolts
WARNING!
You must remove the transport bolts from the backside before using the product.
You’ll need the transport bolts again if you move the product , so make sure you keep them in a safe place.
Please take the following steps to remove the bolts:
1. Loosen 4 bolts with spanner and then remove them.
2. Stop the holes with transport hole plugs.
3. Keep the transport bolts properly for future use.
Levelling the washing machine
WARNING!
The lock nuts on all four feet must be screwed tightly against the housing.
1. Check if the legs are closely attached to the cabinet. If not, please turn them to their original positions
tighten the nuts.
2. Loosen the lock nut turn the feet until it closely contacts with the floor.
3. Adjust the legs and lock them with a spanner, make sure the machine is steady.
1234
Raise Lower
Foot
Lock nut
7
ENG
Min.60cm
100cm
Max.
Connect Water Supply Hose
WARNING!
To prevent leakage or water damage, follow the instructions in this chapter!
Do not kink, crush, modify or sever water inlet hose.
For the model equips hot valve,connect it to hot water tap with hot water supply hose. Energy
consumption will decrease automatically for some program.
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1. Connection between ordinary tap and inlet hose.
2. Connection between screw tap and inlet hose.
Connect the other end of inlet pipe to the inlet
valve at the backside of product and fasten the
pipe tightly clockwise.
Drain Hose
WARNING!
Do not kink or protract the drain hose.
Position drain hose properly ,otherwise damage might result of water leakage.
There are two ways to place the end of drain hose:
1234
Slide bushing
Slide bushing
Clamp nut
Loosen clamp nut and
four bolts
Tap with threads and inlet hose Special tap for washing machine
1. Put the hose into the water drain 2. Connect it to a drain pipe.
Press slide bushing insert inlet
hose into connecting base
Tighten clamp nut Tighten clamp nut
Water Inlet valve
Water drain
Water supply hose
8
ENG
WARNING!
When installing drain hose, fix it properly with a rope.
If drain hose is too long, do not force it into washing machine as it will cause abnormal noises.
CAUTION!
Before washing, please make sure it’s installed properly.
Before washing at first time, the washing machine shall be operated in one round of the whole procedures
without clothes in as follows.
1. Before Washing
Hose
Retainer
NOTE
If the machine has drain hose support, please install it like the following.
NOTE
Detergent need to be added in “case I“ after selecting pre-washing for machines with this function.
NOTE
If default is selected, step 2 can be skipped.
The function button line chart is for reference only, please refer to real product as standard.
2. Washing
Max.100c
Min.60cm
Mi n.60 cm
Ma x.10 0cm
Drain
Bind
OPERATIONS
Quick Start
Plug in
Select Program Select function or default Start up
Open tap Load Close door Add detergent
Main
wash
Softener
Prewash
9
ENG
3. After Washing
The door lock and the [Start / Pause ] lights flash with the buzzer beeping or two small points flash on the
digital screen.
The working condition of the washer should be (0-40) °C.If used under 0 °C,the inlet valve and draining
system may be damaged. If the machine is placed under condition of 0 °C or less, then it should be
transferred to normal ambient temperature to ensure the water supply hose and drain hose are not frozen
before use.
Please check the labels and the explanation of using detergent before wash. Use non-foaming or
less-foaming detergent suitable for machine washing properly.
Prewash detergent
Main wash detergent
Softener
Before Each Washing
Detergent Dispenser
Check the label
Put small clothes into the pillow slip
Pull out the dispenser
Take out the items out of the pockets
Turn easy-pilling and long-pile fabric
inside out
Knot the long strips, zip or button
Separate clothes with different textures
WARNING!
When washing a single clothes, it may easily cause great eccentricity and give alarm due to great
unbalance. Therefore it is suggested to add one or two more clothes to be washed together so that
draining can be done smoothly.
Don’t wash clothes that have been in touch with kerosene, gasoline, alcohol and other flammable materials.
CAUTION!
Detergent only need to be added in “case I“ after selecting pre-washing for machines with this function.
10
ENG
Model: WF61063M
Means must Means optional
NOTE
As for the agglomerated or ropy detergent or additive, before they are poured into the detergent box, it
is suggested to use some water for dilution to prevent the inlet of detergent box from being blocked and
overflowing while filling water.
Please choose suitable type of detergent for the various washing temperature to get the best washing
performance with less water and energy consumption.
Model: WF60832M, WF61033M
Means must Means optional
Program
Cotton 30 °C
Cotton 40 °C
Cotton 60 °C
Cotton 90 °C
Synthetic
Synthetic 40 °C
Drum Clean
Cold Wash
Cold Wash 20 °C
Spin Only
Drain Only
Rinse&Spin
Program
Cotton 30 °C
Cotton 40 °C
Cotton 60 °C
Cotton 90 °C
Synthetic
Synthetic 40 °C
Drum Clean
Cotton Intensive 40 °C
Cotton Intensive 60 °C
Quick Wash 45'
Quick Wash 30'
Quick Wash 15'
Program
Delicate 30 °C
Delicate
Ends in 9H
Ends in 6H
Ends in 3H
Quick Wash 45'
Quick Wash 30'
Quick Wash 15'
ECO 40-60
Cotton Intensive 40 °C
Cotton Intensive 60 °C
Rinse&Spin
Program
Spin Only
Drain Only
Rinse&Spin
Delicate 30 °C
Delicate
Mix 60 °C
Mix 40 °C
Mix
ECO 40-60
Cold Wash
Cold Wash 20°C
11
ENG
Control Panel
Model: WF60832M, WF61033M
Prewash Extra Rinse No Spin Pause/Start
Press 3 sec.Press 3 sec.
Drum
Clean
Cotton Intensive
OFF
Spin Only
Drain Only
Rinse & Spin
Delicate
30°C
9H
6H
45’
30’
Quick Wash 15’
Ends in 3H
Cold Wash
ECO 40-60
20°C
Cotton 30°C
40°C
40°C
Synthetic
40°C
60°C
60°C
90°C
Delay
Drum Clean
Cotton Intensive
OFF
Extra
Rinse
Spin
Speed Pause/Start
Press 3 sec.
Press 3 sec.
Spin Only
ECO 40-60
Drain Only
Rinse & Spin
45’
30’
Quick Wash 15’
Delicate
30°C
40°C
60°C
40°C
60°C
Mix
Cold Wash
20°C
Cotton 30°C
40°C
60°C
90°C
Synthetic
40°C
Model: WF61063M
Off
Product is switched off.
Start/Pause
Press the button to start or pause the
washing cycle.
Option
This allows you to select an additional
function and will light when selected
Programs
Available according to the laundry type.
NOTE
When the program is finished,the Pause/Start and Door Lock lights
flash. (Model: WF60832M, WF61033M).
NOTE
The chart is for reference only, please refer to real product as standard.
12
ENG
Option
Prewash
The Prewash function can get an extra wash before main wash,it is suitable for washing the
dust off the surface of the clothes; You need to put detergent into the Case (I) when selecting it.
Extra Rinse
The laundry will undergo extra rinse once after you select it.
No Spin
It will not spin if you choose this function.
Model: WF60832M, WF61033M,
Model: WF61063M
Program Option
Prewash Extra Rinse
Cotton 30 °C
Cotton 40 °C
Cotton 60 °C
Cotton 90 °C
Synthetic
Synthetic 40 °C
Drum Clean
Cotton Intensive 40°C
Cotton Intensive 60°C
Drain Only
Rinse&Spin
Delicate 30 °C
Delicate
Program Option
Delay Extra Rinse
Cotton 30 °C
Cotton 40 °C
Cotton 60 °C
Cotton 90 °C
Synthetic
Synthetic 40 °C
Drum Clean
Spin Only
Cotton Intensive 40°C
Cotton Intensive 60°C
Quick Wash 45'
Quick Wash 30'
Program Option
Prewash Extra Rinse
Ends in 9H
Ends in 6H
Ends in 3H
Quick Wash 45'
Quick Wash 30'
Quick Wash 15'
Spin Only
Cold Wash
Cold Wash 20 °C
ECO 40-60
Program Option
Delay Extra Rinse
Drain Only
Rinse&Spin
Delicate 30 °C
Delicate
Mix 60 °C
Mix 40 °C
Mix
Cold Wash
Cold Wash 20 °C
ECO 40-60
Quick Wash 15'
Means optional
13
ENG
Extra
Rinse
No
Spin
Spin
Speed
/
Other Functions
Prewash
Press 3 sec. Press 3 sec.
/
Delay
Mute the buzzer
Child Lock
To avoid mis operation by children.
To act the buzzer function, press the button again for 3 seconds. The setting will be kept until the next reset.
Choose the
Choose the
Program
Start Press [Extra Rinse] and [No Spin]/
[Spin Speed] 3 sec. till buzzer beep.
Press the [Prewash]/[Delay]button for
3sec. The buzzer is mute.
CAUTION!
After Muting the buzzer function, the sounds will not be activated any more.
Only press and hold the two button can release “Child Lock”, even power off, switch off and program end, the
“Child Lock” will lock all buttons except power button and “Child Lock“ button.
Please release “Child Lock“ before selecting program and starting washing.
Model: WF61063M
When child lock is activated and program starts, child lock indicator will switch on, and the CL and remaining
time on the display are alternately displayed in 0.5s. Press the other buttons will make child lock indicator flash
for 3s. when program finish,CL and END alternate for 10s in 0.5s, then the child lock lights flash for 3s.
Only press and hold the two button can release child lock, even power off, switch off and program end
The “Child Lock” will lock all buttons except Power button and Child Lock button please release child lock
before selecting program and starting washing.
Program
CAUTION!
Model: WF60832M, WF61033M
14
ENG
Program Default Speed(rpm)
800 1000 1200
Cotton 30 °C 800 1000 1200
Cotton 40 °C 800 800 1200
Cotton 60 °C 800 800 1200
Cotton 90 °C 800 800 1200
Synthetic 800 1000 1200
Synthetic 40 °C 800 1000 1200
Drum Clean 400 400 --
Cold Wash 800 1000 1200
Cold Wash 20 °C 800 1000 1200
Cotton Intensive 40 °C 800 1000 1200
Cotton Intensive 60 °C 800 1000 1200
ECO 40-60 800 1000 1200
Program Default Speed(rpm)
800 1000 1200
Spin Only 800 1000 1200
Drain Only ---
Rinse&Spin 800 1000 1200
Delicate 30 °C 600 600 600
Delicate 600 600 600
Quick Wash 45' 800 800 800
Quick Wash 30' 800 800 800
Quick Wash 15' 800 800 800
MIX 60°C 800 1000 1200
Mix 40°C 800 1000 1200
Mix 800 1000 1200
Programs
Programs are available according to the laundry type.
Programs
Synthetic Wash synthetic articles, for example: shirts, coats, blending. While washing the knitting
textiles, detergent quantity should be reduced due to its loose string construction and
light forming bubbles.
Delicate For delicate, washable textiles, e.g. made of silk, satin, synth fibers or blended fabrics.
Drum Clean It applies 90 °C high temperature sterilization to make the clothes washing more green.
When this procedure is performed, the clothes or other washing cannot be added.
When proper amount of chlorine bleaching agent is put in the barrel cleaning effect
will be better. The customer can use this program regularly according to the need.
Spin Only Extra spin with selectable spin speed.
Rinse&Spin Extra rinse with spin.
Drain Only Drain off the water.
Quick Wash 15’ It is suitable for washing few and not very dirty clothes quickly.
Cotton
Intensive To increase the washing effects, washing time is increased.
ECO 40-60 Default 40°C,not selectable,suitabale for laundry washing at about 40°C-60°C.
Cold Wash Cold water to wash clothes.
Cotton Hard-wearing textiles, heat-resistant textiles made of cotton orlinen.
Ends in* The function can be set with this program, the total time including washing time and
delaying time is 3h,6h or 9h.
Speed
The speed is:
800: 0-400-600-800
1000: 0-400-600-800-1000 1200: 0-400-600-800-1000-1200
15
ENG
Program Load (kg) Temp. °C Default Time
6Default 6
Synthetic 3.25 Cold 2:20
Synthetic 40°C 3.25 40 2:20
Cold Wash 6Cold 1:00
Cold Wash 20°C 620 1:01
Cotton 30°C 630 2:40
Cotton 40°C 640 2:40
Cotton 60°C 660 2:45
Cotton 90°C 690 2:50
ECO 40-60 660 3:16
Cotton Intensive 40°C 640 4:04
Cotton Intensive 60°C 660 4:08
Drum Clean -90 1:18
Spin Only 6-0:12
Drain Only - - 0:01
Rinse&Spin 6-0:20
Delicate 30℃ 2.7 30 0:50
Delicate 2.7 Cold 0:48
Ends in 9H 640 0:59
Ends in 6H 640 0:59
Ends in 3H 640 0:59
Quick Wash 45’ 2.2 40 0:45
Quick Wash 30’ 2.2 30 0:30
Quick Wash 15’ 2.2 Cold 0:15
The new EU energy efficiency class is E
Energy test program: ECO 40-60. Speed: the highest speed; Other as the default.
Half load for 6Kg machine:3.25Kg.
The old EU energy efficiency class is A+
Energy test program: Cotton Intensive 60°C/40°C.Speed: the highest speed; Other as the default.
Half load for 6Kg machine:3.25Kg.
The parameters in this table are only for user’s reference. The actual parameters may be
different with the parameters in above mentioned table.
NOTE
Mix** You can select this procedure wash the tough clothes, that need much more time
and strength. It is used for the daily clothes made of cotton, such as sheets, chains,
pillowcases bathrobe and underwear.
* Model: WF60832M, WF61033M
** Model: WF61063M
Washing Programs Table
Model: WF60832M, WF61033M
16
ENG
Model: WF61063M
Program Load (kg) Temp. °C Default Time
6Default 6.5
Synthetic 3.25 Cold 2:20
Synthetic 40°C 3.25 40 2:20
Cold Wash 6Cold 1:00
Cold Wash 20°C 6 20 1:01
Cotton 30°C 6 30 2:40
Cotton 40°C 6 40 2:40
Cotton 60°C 6 60 2:45
Cotton 90°C 6 90 2:50
ECO 40-60 6 60 3:24
Cotton Intensive 40°C 6 40 4:12
Cotton Intensive 60°C 6 60 4:16
Drum Clean -90 1:18
Spin Only 6 -0:12
Drain Only - - 0:01
Rinse&Spin 6 -0:20
Delicate 30°C 2.5 30 0:50
Delicate 2.5 Cold 0:48
Mix 60°C 6 60 1:11
Mix 40°C 6 40 0:59
Mix 6 Cold 0:59
Quick Wash 45’ 2.0 40 0:45
Quick Wash 30’ 2.0 30 0:30
Quick Wash 15’ 2.0 Cold 0:15
NOTE
The parameters in this table are only for user’s reference. The actual parameters may bedifferent with the
parameters in above mentioned table.
The new EU energy efficiency class is E
Energy test program: ECO 40-60. Speed: the highest speed; Other as the default.
Half load for 6Kg machine:3.25Kg.
The old EU energy efficiency class is A
Energy test program: Cotton Intensive 60°C/40°C.Speed: the highest speed; Other as the default.
Half load for 6Kg machine:3.25Kg.
17
ENG
MAINTENANCES
Cleaning and Care
WARNING!
Before your maintenance starts, please unplug the machine and close the tap.
Cleaning The Cabinet
Proper maintenance on the washing machine can extend working life. The
surface can be cleaned with diluted non-abrasive neutral detergents when
necessary. If there any water overflow, use the wet cloth to wipe it off immedi
No sharp items are allowed.
NOTE
Formic acid and its diluted solvents or equivalent are forbidden, such as
alcohol, solvents or chemical products etc.
Cleaning The Drum
The rusts left inside the drum by the metal articles should be removed immediately with chlorine-free
detergents. Never use steel wool.
NOTE
Don’t put laundry in the washing machine during the drum cleaning.
Cleaning The Door Seal and Glass
Wipe the glass and seal after each wash to remove lint
and stains. If lint builds up it can cause leaks. Remove
any coins, buttons and other objects from the seal
after each wash.
Cleaning The Inlet Filter
NOTE
Inlet filter must be cleaned if there is less water.
Washing the filter in the tap
1. Close the tap.
2. Remove the water supply hose from the tap.
3. Clean the filter.
4. Reconnect the water supply hose.
Washing the filter in washing machine:
1. Screw off the inlet pipe from the backside of the
machine.
2. Pull out the filter with long nose pliers and
reinstall it back after being wash
3. Use the brush to clean the filter.
4. Reconnect the inlet pipe.
NOTE
If the brush is not clean, you can pull out the filter and wash it separately;
Reconnect, turn on the tap.
d.
18
ENG
Clean The Detergent Dispenser
1. Press down the arrow location on softener cover inside the dispenser drawer.
2. Lift the clip up and take out softener cover and wash all grooves with water.
3. Restore the softener cover and push the drawer into position.
NOTE
Do not use alcohol, solvents or chemical products to clean the machine.
Cleaning The Drain Pump Filter
WARNING!
Be careful of the hot water!
Allow detergent solution to cool down.
Unplug the machine to avoid electrical shock before washing.
Drain pump filter can filter the yarns and small foreign matters from the washing.
Clean the filter periodically to ensure the normal operation of washing machine.
CAUTION!
Make sure that valve cap and emergency drain hose are reinstalled properly, cap plates should be inserted
aligning to hole plates otherwise water may leak;
Some machines don’t have emergency drain hose, rotate lower cover cap directly to make water run into
basin.
When the appliance is in use and depending on the program selected there can be hot water in the
pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the
cycle, and is empty. When replacing the cover, ensure it is securely re-tightened.
A
1 2 3 4
Pull out the dispenser
drawer by pressing the
button marked with “A
Open the Service filter
Clean the dispenser
drawer under water
Open the filter by turning
it counter-clockwise
Clean inside the recess
with an old toothbrush
Remove extraneous
matter
Insert the dispenser
drawer
Close the filter by turning
it clockwise
1 2 3 4
19
ENG
Troubleshooting
The start of the appliance does not work or it stops during operation.
First try to find a solution to the problem, If not, contact the service centre.
Description Reason Solution
Washing machine cannot
start up
Door is not closed properly Restart after the door is closed
Check if the clothes are stuck
Door can’t be opened Washers safety protection
design is working
Disconnect the power, restart the product
Water leakage The connection between
inlet pipe or outlet hose is
not tighten
Check and fasten water pipes
Clean up outlet hose
Detergent residues in
the box
Detergent is dampened or
agglomerated
Clean and wipe the detergent box
Indicator or display does
not light
Disconnect the power
PC board or harness has
connection problem
Check if the power is shut down and the
power plug is connected correctly
Abnormal noise Check if the fixing (bolts) have been removed
Check it’s installed on a solid and level floor
Description Reason Solution
E30 Door is not closed properly Restart after the door is closed
Check if the clothes are stuck
E10 Water injecting problem while
washing
Check if the water pressure is too low
Straighten the water pipe
Check if the inlet valve filter is blocked
E21 Overtime water draining Check if the drain hose is blocked
E12 Water overflow Restart the washer
Other Please try the solutions again, if unsuccessful, please call our service line.
Description Reason Solution
Pause/Start
No Spin
Extra Rinse
Prewash
Flash
Off
Off
Off
Off
Off
Door is not closed properly Restart after the door is closed
Check if the clothes is stuck
Off
Off
Off
Flash
Off
Off
Water injecting problem
while washing
Check if the water pressure is too low
Straighten the water pipe
Check if the inlet valve filter is blocked
Off
Off
Flash
Flash
Off
Off
Overtime water draining Check if the drain hose is blocked
Off
Off
Off
Off
Flash
Off
Water overflow Restart the washer
Other Please try the solutions again, if unsuccessful, please call our service line
NOTE After the check, activate the appliance. If the problem occurs again, contact the service.
20
ENG
Technical Specifications
Power Supply 220-240V~,50Hz
MAX.Current 10A
Standard Water Pressure 0.05MPa~1MPa
850mm
595mm
D
Model Washing
Capacity
Dimension
(WxDxHmm) Net Weight Rated Power
WF60832M 6kg 595x400x850 52kg 2050W
WF61033M 6kg 595x400x850 52kg 2000W
WF61063M 6kg 595x400x850 52kg 2000W
1/248