Tesla WL71291M Manual de utilizare

Product images are for illustrative purposes only and may differ from the actual product.

WASHING

MACHINE

WL71291M

User Manual

SRB

HR RO SLOENG

BiH/

CG

2

ENG

SAFETY INSTRUCTIONS

For your safety,the information in this manual must be followed to minimize the risk of ﬁre or explosion,

electric shock, or to prevent property damage, personal injury or loss of life.

Explanation of the symbols:

WARNING!

This combination of symbol and signal word indicates a potentially dangerous situation which may result in

death or serious injuries unless it’s avoided.

CAUTION!

This combination of symbol and signal word indicates a potentially dangerous situation which may result in

slight or minor injuries or damage to property and the environment.

NOTE

This combination of symbol and signal word indicates a potentially dangerous situation which may result in

slight or minor injuries.

WARNING!

The electric shock!

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly

qualiﬁed persons in order to avoid a hazard.

• The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be

reused.

• Before any maintenance the device, unplug the appliance from the mains.

• Always unplug the machine and turn off the water supply after use. The max. inlet water pressure, in

pascals. The min. inlet water pressure, in pascals.

• To ensure your safety, power plug must be inserted into an earthed three-pole socket. Check carefully and

make sure that your socket is properly and reliably earthed.

• Make sure that the water and electrical devices must be connected by a qualiﬁed technician in accordance

with the manufacturer’s instructions and local safety regulations.

Risk to children!

• EN countries: the appliance can be used by children aged from 8 years and above and persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance in a safe way and understand the hazards

involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by

children without supervision.

• Children of less than 3years should be supervised to ensure that they do not play with appliance.

• Animals and children may climb into the machine. Check the machine before every operation.

• Kids should be supervised that they do not play with the appliance.

• Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may

result.

• Plug must be accessible after installation.

Risk of explosion!

• Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible

or explosive substances( such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.)

This may result in ﬁre or explosion.

• Before hand thoroughly rinse items of washing by hand.

3

ENG

CAUTION!

Installing the product!

• This washing machine is for indoor use only.

• It isn’t intended to be built-in using.

• The openings must not be obstructed by a carpet.

• Washing machine shall not be installed in bath room or very wet rooms as well as in the rooms with

explosive or caustic gases.

• The washing machine with single inlet valve only can be connected to the cold water supply. The product

with double inlet valves should be correctly connected to the hot water and cold water supply.

• Plug must be accessible after installation.

• Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may

result.

Risk of damaging appliance!

• Your product is only for home use and is only designed for the textiles suitable for machine washing.

• Do not climb up and sit on top cover of the machine.

• Do not lean against machine door.

• Cautions during Handling Machine:

1. Transport bolts shall be reinstalled to the machine by a specialized person.

2. The accumulated water shall be drained out of the machine.

3. Handle the machine carefully. Never hold each protruded part on the machine while lifting. Machine

door can not be used as the handle during the conveyance.

4. This appliance is heavy. Transport with care.

• Please do not close the door with excessive forces. If it is found difﬁcult to close the door, please check if

the clothes are put in or distributed well.

• It is forbidden to wash carpets.

Operating the appliance!

• Flammable and explosive or toxic solvents are forbidden. Gasoline and alcohol etc.Shall not be used as

detergents. Please only select the detergents suitable for machine washing, especially for drum.

• Make sure that all pockets are emptied. Sharp and rigid items such as coin,brooch,nail,screw or stone etc.

may cause serious damages to this machine.

• Please check whether the water inside the drum has been drained before opening its door.Please do not

open the door if there is any water visible.

• Be careful of burning when the product drains hot washing water.

• Never reﬁll the water by hand during washing.

• After the program is completed, please wait for two minutes to open the door.

Packaging/Old appliance

This marking indicates that this product should not be disposed with other household wastes throughout the

EU.To prevent possible harm to the environment or human health from uncontrolled waste disposal,recycle

it responsibly to promote the sustainable reuse of material resources.To return your used device, please use

the collection systems or contact the retailer where the product was purchased. They return and can take this

product for environmental safe recycling.

4

ENG

INSTALLATION

Product Description

Accessories

NOTE

• The product line chart is for reference only, please refer to real product as standard.

Transport hole plug Supply hose

cold water

Drain hose support

(optional)

Owner’s manual

Installation area

WARNING!

• Stability is important to prevent the product from wandering!

• Make sure that the product should not stand on the power cord.

Door

Service ﬁlter

Detergent dispenser

Drum

Drain hose

Control panel

Power supply cord

5

ENG

Before installing the machine, the location characterized as follows shall be

selected:

1. Rigid, dry, and level surface

2. Avoid direct sunlight

3. Sufﬁcient ventilation

4. Room temperature is above 0 °C

5. Keep far away from the heat resources such as coal or gas.

Unpacking the washing machine

WARNING!

• Packaging material (e.g. Films, Styrofoam) can be dangerous for children.

• There is a risk of suffocation! Keep all packaging well away from children.

1. Remove the cardboard box and styrofoam packing.

2. Lift the washing machine and remove the base packing.Make sure the small triangle foam is removed

with the bottom one together. If not, lay the unit down with side surface, then remove the small foam

from the unit bottom manually.

3. Remove the tape securing the power supply cord and drain hose.

4. Remove the inlet hose from the drum.

Remove transport bolts

WARNING!

• You must remove the transport bolts from the backside before using the product.

• You’ll need the transport bolts again if you move the product , so make sure you keep them in a safe place.

Please take the following steps to remove the bolts:

1. Loosen 4 bolts with spanner and then remove them.

2. Stop the holes with transport hole plugs.

3. Keep the transport bolts properly for future use.

Levelling the washing machine

WARNING!

• The lock nuts on all four feet must be screwed tightly against the housing.

1. Check if the legs are closely attached to the cabinet. If not, please turn them to their original positions

tighten the nuts.

2. Loosen the lock nut turn the feet until it closely contacts with the ﬂoor.

3. Adjust the legs and lock them with a spanner, make sure the machine is steady.

2

3

4

1

Raise Lower

Foot

Lock nut

6

ENG

Connect Water Supply Hose

WARNING!

• To prevent leakage or water damage, follow the instructions in this chapter!

• Do not kink, crush, modify or sever water inlet hose.

• For the model equips hot valve,connect it to hot water tap with hot water supply hose. Energy

consumption will decrease automatically for some program.

Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.

1. Connection between ordinary tap and inlet hose.

2. Connection between screw tap and inlet hose.

Drain Hose

WARNING!

• Do not kink or protract the drain hose.

• Position drain hose properly, otherwise damage might result of water leakage.

There are two ways to place the end of drain hose:

1

2

3

4

Slide bushing

Clamp nut

Loosen clamp nut and

four bolts

Tap with threads and inlet hose Special tap for washing machine

1. Put the hose into the water drain 2. Connect it to the branch drain pipe of the

trough.

Press slide bushing insert inlet

hose into connecting base

Tighten clamp nut Connection ﬁnished

Water Inlet valve

Water supply hose

Connect the other end of inlet pipe to the inlet

valve at the backside of product and fasten the pipe

tightly clockwise.

Water

trough

7

ENG

1 2 3

• Before washing, please make sure it’s installed properly.

Hose

Retainer

Ma x.10 0c

Mi n.60 cm

Ma x.10 0cm

Trough

Bind

OPERATIONS

Quick Start

1 2 3

4

65

Plug in Open tap Load

Add detergent Close drum door Close machine door

Select function or defaultSelect program Start up

• Detergent need to be added in

“case I “after selecting pre-washing

for machines with this function.

• Make sure that the drum ﬂaps are

properly locked.

• All metal hooks must be properly

hooked inside the rear door ﬂap.

• Check the roller before each

laundry, it must roll smoothly.

If default is selected, step 2 can be skipped.

NOTE

3. After Washing

If the machine has drain hose support, please install it like the following.

NOTE

• When installing drain hose, ﬁx it properly with a rope.

• If drain hose is too long, do not force it into washing machine as it will cause

abnormal noises.

WARNING!

CAUTION!

1. Before Washing

2. Washing

Buzzer beep or “End” on

display.

8

ENG

• The working condition of the washer should be (0-40) °C.If used under 0 °C,the inlet valve and draining

system may be damaged. If the machine is placed under condition of 0 °C or less, then it should be

transferred to normal ambient temperature to ensure the water supply hose and drain hose are not frozen

before use.

• Please check the labels and the explanation of using detergent before wash. Use non-foaming or

less-foaming detergent suitable for machine washing properly.

Prewash detergent

Main wash detergent

Softener

Before Each Washing

Detergent Dispenser

Check the label

Put small clothes into the pillow slip

Pull out the dispenser

Take out the items out of the pockets

Turn easy-pilling and long-pile fabric

inside out

Knot the long strips, zip or button

Separate clothes with different textures

WARNING!

• When washing a single clothes, it may easily cause great eccentricity and give alarm due to great

unbalance. Therefore it is suggested to add one or two more clothes to be washed together so that

draining can be done smoothly.

• Don’t wash clothes that have been in touch with kerosene, gasoline, alcohol and other ﬂammable materials.

CAUTION!

• Detergent only need to be added in “case I “after selecting pre-washing for machines with this function.

• Do not exceed the “MAX”level mark when ﬁlling in detergent,additives or softener.

9

ENG

Program

Cotton

Synthetic

Mix

Jeans

Sportswear

Drum Clean

20�C

Intensive

NOTE

• As for the agglomerated or ropy detergent or additive, before they are poured into the detergent box, it

is suggested to use some water for dilution to prevent the inlet of detergent box from being blocked and

overﬂowing while ﬁlling water.

• Please choose suitable type of detergent for the various washing temperature to get the best washing

performance with less water and energy consumption.

• The chart is for reference only, Please refer to real product as standard.

Control Panel

Program

Spin Only

Rinse & Spin

Wool

Daily Wash 45’

Quick 15’

ECO 40-60

Rapid 45’

Means must Means optional

1. On/Off

Product is switched on or off.

2. Start/Pause

Press the button to start or pause the washing

cycle.

3. Option

This allows you to select an additional function

and will light when selected.

4. Programe

Available according to the laundry type.

5. Display

The display shows the settings, estimated

time remaining, options, and status messages

for your washer. The display will remain on

through the cycle.

NOTE

Press 3 sec. to set My Cycle / Signal

Press 3 sec to set

Delay Function

Temp.

Spin

Start/Pause

Power

My Cycle

Drum Clean

Quick 15'

Rapid 45'

ECO 40-60

Intensive

Wool

Rinse & Spin

Spin Only

Cotton

Synthetic

Mix

Jeans

Sportswear

20ºC

Baby Care

10

ENG

Option

A

Display

Wash Time

End

Delay Time

Error

B

Door Lock

C

Delay

D

Pre Wash

E

Extra Rinse

Pre Wash

The Prewash function can get an extra wash before main wash,it is suitable for washing the dust rises

to surface of the clothes;You need to put detergent into the Case (I) when select it.

Extra Rinse

The laundry will undergo extra rinse once after you select it.

Choose the Programme Setting time Start

Delay

Set the Delay function:

1. Select a programme;

2. Press the Delay button to choose the time (the delaying time is 0-24 H/3H-6H-9H);

3. Press [Start/Pause] to commence the delay operation

Cancel the Delay function:

Press the [Delay] button until the display be 0H.It should be pressed before starting the programme.

If the programme already started, should switch off programme to reset a new one.

If there is any break in the power supply while the machine is operating, a special memory stores the selected

programme and when the power is restarted, the program will continue.

CAUTION!

Program Option

Delay Extra

rinse

Pre

wash

Cotton

Quick 15’

Rapid 45’

ECO 40-60

Intensive

20�C

Rinse & Spin

Spin Only

Program Option

Delay Extra

rinse

Pre

wash

Drum Clean

Baby Care

Sportswear

Jeans

Wool

Synthetic

Mix

Means optional(Some models have intelligent weighing function, please refer to the actual product)

11

ENG

Other functions

Choose the Programme Start

Press [Spin] and [Delay] 3 sec. till buzzer beep.

Temp.

Press the button to regulate the temperature (Cold, 20°C, 40°C, 60°C, 90°C)

Spin

Press the button to change the speed: 0-600-800-1000-1200

Child Lock

To avoid mis operation by children.

Program Default Speed (rpm)

Cotton

1200

Quick 15’

800

Rapid 45’

800

ECO 40-60

1200

Intensive

800

20�C

1000

Rinse & Spin

800

Spin Only

800

Program Default Speed (rpm)

Drum Clean

-

Baby Care

800

Sportswear

800

Jeans

800

Wool

600

Synthetic

1200

Mix

800

• During the “Child Lock”function is activing, the buzzer will beep “Di-Di-Di”, When

the buttons are pressed.

• Press the two button 3sec. also to be released the function.

• The “Child Lock” will lock all buttons except Power button.

• Cut off the power supply , the kid’s protection is to be released.

After Muting the buzzer function, the sounds will not be activated any more.

Mute the buzzer

CAUTION!

Choose the Programme Press the [Spin]button for 3sec., the buzzer is mute.

To act the buzzer function, press the button again for 3 seconds. The setting will be kept until the

next reset.

Spin

My Cycle

To memory the frequently used programme.

After choosing the programme and setting the options, press [Temp.] 3 sec. before start to wash.

The default setting course is Cotton.

Spin

Delay

12

ENG

Programs

Programs are available according to the laundry type

Programs

Cotton

Hard-wearing textiles, heat-resistant textiles made of cotton or linen.

Synthetic

Wash synthetic articles, for example: shirts, coats, blending. While washing

the knitting textiles, detergent quantity shall be reduced due to its loose string

construction and easily forming bubbles.

Baby Care

Washing the baby’s clothes, it can make the baby’s wear cleaner and make the

rinse performance better to protect the baby skin.

Rapid 45’

Washing few and not very dirty clothes quickly.

Mix

Mixed load consisting of textiles made of cotton and synthetics.

Sportswear

Washing the activewear.

Jeans

Specially for jeans.

Quick 15’

Extra short programme approx, suitable for lightly soiled washing as a small

amounts of laundry.

Delicate

For delicate, washable textiles, e.g. made of silk, satin, synthetic ﬁbres or

blended fabrics.

Wool

Hand or machine-washable wool or richwool textiles.Especially gentle wash

programme to prevent shrinkage, longer programme pauses (textiles rest in

wash liquor).

Spin Only

Extra spin with selectable spin speed.

Rinse&Spin

Extra rinse with spin.

Cotton ECO

To increase the washing effects, washing time is increased.

Drum Clean

Specially set in this machine to clean the drum and tube. It applys 90 °C

high temperature sterilization to make the clothes washing more green.

When this programme is performed, the clothes or other washing cannot be

added. When proper amount of chlorine bleaching agent is put in, the barrel

cleaning effect will be better. The customer can use this programme regularly

according to the need.

ECO 40-60

Default 40�C, not selectable, suitabale for laundry washing at about 40�C-60�C.

Intensive

To increase the washing effects, washing time is increased.

20�C

Washing brightly colored clothes, it can protect the colors better .

13

ENG

Washing Programs Table

Program Load (kg) Temp. (°C) (Default) Display Time

Cotton

7.5 40 3:39

Synthetic

3.75 40 3:17

Mix

7.5 40 1:37

Jeans

7.5 60 1:45

Sportswear 3.75 40 1:31

20�C

3.75 20 1:01

Baby Care

7.5

60 1:42

Drum Clean

-

90 1:18

Spin Only

7.5 -