Hendi 224328 Manual de utilizare

Stick blenders with

adjustable or ﬁxed speed

Miksery ręczne ze stałą

lub zmienną prędkością

224328, 224373, 282298, 224335, 224380, 224397, 282311, 224359, 224052

EN: You should read this user manual carefully before

using the appliance.

DE: Sie sollten diese Bedienungsanleitung sorgfältig

lesen, bevor Sie das Gerät verwenden.

NL: Lees deze gebruikershandleiding zorgvuldig door

voordat u het apparaat gebruikt.

PL: Przed użyciem urządzenia należy uważnie

przeczytać niniejszą instrukcję obsługi.

FR: Vous devez lire attentivement ce manuel

d’utilisation avant d’utiliser l’appareil.

IT: È necessario leggere attentamente questo

manuale utente prima di utilizzare l’apparecchio.

RO: Ar trebui să citiți cu atenție acest manual de

utilizare înainte de a utiliza aparatul.

RU: Перед использованием прибора внимательно

прочтите это руководство пользователя.

CZ: Před uvedením spotřebiče do provozu byste si měli

pečlivě přečíst návod k použití.

2

EN: Keep these instructions with the appliance.

DE: Bewahren Sie diese Anweisungen zusammen mit dem Gerät auf.

NL: Bewaar deze instructies bij het apparaat.

PL: Przechowuj tę instrukcję razem z urządzeniem.

FR: Conservez ces instructions avec l’appareil.

IT: Conservare queste istruzioni insieme all’apparecchio.

RO: Păstrați aceste instrucțiuni la aparat.

RU: Храните эти инструкции вместе с прибором.

CZ: Tyto pokyny uschovejte u přístroje.

EN: For indoor use only.

DE: Nur für den Innengebrauch.

NL: Alleen voor Gebruik binnenshuis.

PL: Tylko do użytku w pomieszczeniach.

FR: Pour une utilisation en intérieur uniquement.

IT: Solo per uso interno.

RO: Numai pentru uz interior.

RU: Только для использования внутри помещений.

CZ: Pouze pro vnitřní použití.

CONTENTS

1. CONTENT ORGANIZATION AND CONSULTATION MODALITY ................... 4

2. GENERAL INFORMATION AND CHARACTERISTICS.................................. 5

3. SAFETY INSTRUCTIONS .......................................................................... 10

4. PUT ON SERVICE AND USE ..................................................................... 11

5. MAINTENANCE, BREAKS RESEARCH AND CLEANING.......................... 15

6. SELLING ................................................................................................... 17

7. MANUFACTURING MATERIALS ............................................................... 18

8. ELECTRICAL DIAGRAM ........................................................................... 18

Dear Customer,

Thank you for purchasing this Hendi appliance. Read this manual carefully, paying particular attention to

the safety regulations outlined below, before installing and using this appliance for the first time.

Safety regulations

• Only use the appliance for the intended purpose it was designed for as described in this

manual.

• The manufacturer is not liable for any damage caused by incorrect operation and

improper use.

• Keep the appliance and electrical plug away from water and other liquids. In the event

the appliance falls into water, immediately remove the power plug from the socket. Do

not use the appliance until it has been checked by a certiﬁed technician. Failure to follow

these instructions will cause life threatening risks.

• Never attempt to open the housing of the appliance by yourself.

• Do not insert objects into the housing of the appliance.

• Do not touch the plug with wet or damp hands.

• Danger of electric shock! Do not attempt to repair the appliance by yourself, repairs

are only to be conducted by qualiﬁed personnel.

• Never use a damaged appliance! When it’s damaged, disconnect the appliance from the

socket and contact the retailer.

• Warning! Do not immerse the electrical parts of the appliance in water or other liquids.

• Never hold the appliance under running water.

• Regularly check the power plug and cord for any damage. When damaged it must be

replaced by a service agent or similarly qualiﬁed person in order to avoid danger or injury.

• Make sure the cord does not come in contact with sharp or hot objects and keep it away

from open ﬁre. Never pull the power cord to unplug it from the socket, always pull the

plug instead.

• Make sure that the power cord and/or extension cord do not cause a trip hazard.

• Never leave the appliance unattended during use.

• Warning!

As long as the plug is in the socket the appliance is connected to the power

source.

• Turn off the appliance before unplugging it from the socket.

• Connect the power plug to an easily accessible electrical socket so that in case of emergency

the appliance can be unplugged immediately.

• Never carry the appliance by the cord.

• Do not use any extra devices that are not supplied together with the appliance.

• Only connect the appliance to an electrical outlet with the voltage and frequency mentioned

on the appliance label.

• Never use accessories other than those recommended by the manufacturer. Failure to

do so could pose a safety risk to the user and could damage the appliance. Only use

original parts and accessories.

3

NLEN

4

EN

• This appliance should not be operated by persons with reduced physical, sensory or

mental capabilities, or persons that have a lack of experience and knowledge.

• This appliance should, under any circumstances, not be used by children.

• Keep the appliance and its power cord out of reach of children.

• WARNING: ALWAYS switch off the appliance and unplug from power socket before

cleaning, maintenance or storage.

1. CONTENT ORGANIZATION AND CONSULTATION MODALITY

MANUAL PURPOSE

MANUAL IMPORTANCE

The present instruction manual for the use is to be

considered as integral part of the machine:

• Must be kept for all the machine life.

• Must be coupled with the machine in case of its

ceasing.

• Besides to show all useful notices for the opera-

tors, contains (collected in speciﬁc chapters) the

electric diagrams that will be used for the possi-

ble maintenance interventions and reparation.

SCOPE / MANUAL PURPOSE

The instructions manual for the use has the pur-

pose to furnish to the commitment all necessary

information so that, except of an adequate supplied

machine use, is able to manage the same in the

more autonomous way and possibly safe.

Besides the present manual has been written with

the purpose to supply indications and warnings to

know the supplied machine, to understand its prin-

ciples and functioning limits. For possible doubts

you can call the Authorized Assistance Center.

RECEIVERS

The present instruction manual for the use, deliv-

ered in number of 1 copy together with the machine,

is supplied as integral part of the machine, is turned

both to the operators both to the skilled technicians

qualiﬁed to the installation, use and maintenance.

The prevention and protection service responsibl

e

of the commitment and the additional employers,

to whom is assigned the machine, must take vision

of the present instructions manual for the use, with

the aim to adopt all technical and organizational

measures.

RESPONSIBILITY

• If the present manual endures damages or is lost,

it is possible to request a copy to the Authorized

Assistance Center.

• The present manual reﬂects the technical state

during the machine manufacturing; the manufac-

turer reserves the right to update the production

and of consequence other manual issues, without

the obligation to update productions or previous

manuals, if not in particular cases regarding the

health and the people safety.

• Pay particularly attention to the residual risks

content present on the machine and the prescrip-

tions to which the operators must keep.

• The manufacturer is the responsible for the ma-

chine in its original conﬁguration.

• The manufacturer isn’t the responsible for dam-

5

EN

ages caused from the improper use or not correct

of the machine and documentation or for damages

caused from the imperative standards violation,

negligence, lack of experience, imprudence and

the not respect of regulation standards on behalf

of the employer, of the operator or the maintenanc

e

man and for every possible damage, caused from

an irrational, improper and/or wrong use.

• The manufacturer isn’t the responsible for the

consequences caused from the not original spare

parts use or of equal characteristics.

• The manufacturer is the responsible only for the

information showed in the manual original ver-

sion in Italian language.

• The non-fulﬁllment prescriptions contained in

this manual will cause the guarantee immediate

decay.

• The factory responsible, that supervision to the

working activities, in the ﬁeld of the foreseen re-

spective attributions and competence, must:

– Carry out the foreseen safety measures;

– Make informed the operators about the speciﬁc

risks whom are exposed and bring to their

knowledge the prevention essential standards;

– Prepare and require that the single operators

observe the safety standards and use the pro-

tection means put at their disposal;

– Get down to work more operators, contempo-

rary, on this product.

SIMBOLOGY MEANING

Here follow it is clearly speciﬁed the symbols and deﬁnitions meaning, which will be used in the present

document.

DANGER

It shows the danger presence for who works on the machine and for who is in the vicinity, so

the indicated activity must be performed in accordance with the actual accident prevention

standards and with the indications showed in the present manual.

PRECAUTION

It shows a warning on useful information and/or further recommendations and/or shrewd-

ness about the actual operation.

ATTENTION

It shows an operation to perform with attention to avoid damage to the machine.

2. GENERAL INFORMATION AND CHARACTERISTICS

USE DESTINATION AND MANUFACTURE PARTS

The mixer here follow called “machine”, is a porta-

ble machine designed to beat, whisk, mince, crum-

ble, emulsify, reduce in mash, etc, to use in the col-

lective and institutional restoration.

With the machine in function of the tool that is

used, it is possible to prepare directly in pot thick

vegetable and pasta soups, soups, mashed pota-

toes, creams, batters, mayonnaise, almonds pulp,

cheese creams and what other like that.

The machine is constituted from an electric motor

inserted in a unique fusion of plastic material (base

machine body), in which the motor shaft is connect-

ed to the work tool: electric mixer or whisk.

The tool is connected and blocked to the machine

body or with a screwed nut, or through a fast unhook

junction.

The feed product is charged manually in the con-

tainer and successively, with the use of both the

6

EN

hands and grasping the machine in the foreseen

areas (see ﬁgure pag. 14), the same is:

• Placed with the tool inside the container or the

pot;

• Screwed, and used up to the end of the feed prod-

uct working;

• Switched off and placed on an adequate support

bench.

On the basis of the operative modalities, and to the

used tool, the machine can:

• Work while is relied on the bottom of the container

(with the mixer tools), not exceeding however the

immersion nick,

• Work maintaining it hung, with the use of both the

hands (with the whisk tool),

• Work placed on a special support that can be

adapted to the pot. The support works as the op-

erator substitute for operations that request long

times or for feed treatments that can present

burns risks (vapor or spatters).

The feed product unload, when the working cycle is

ﬁnished, happens in manual way after having ex-

tracted the machine from the container.

All materials on direct contact with the food product

are in accordance with the actual hygienic stand-

ards for food.

In accordance with the functioning requirements

and production, the machine can be constituted with

different optional parts.

The machine is supplied with the identiﬁcation plate

on which the following data are showed:

ul. Firmowa 12

60-023 Gądki, Poland

TECHNICAL AND MANUFACTURING DATA

Code

224328 224373

282298

224335 224380

224397

282311

224359 224052

Motor power (W)/Voltage (V) 250/230 250/230 300/230 400/230 400/230 500/230

Maximum speed (revolutions/min) 15000 15000 13000 15000 15000 15000

Variable speed (revolutions/min)

only VV models

– 2500 – 15000 2000 – 9000 2000 – 9000 2000 – 9000 2000 – 9000

Sizes A (mm) Ø75 Ø75 Ø100 Ø100 Ø100 Ø100

Sizes B (mm) 285 285 350 350 350 350

Sizes C (mm) 250 + 20 250 + 20 300 + 40 400 + 40 500 + 40 500 + 40

Sizes D (mm) Ø75 Ø75 Ø85 Ø85 Ø85 Ø85

Sizes E (mm) 520 520 650 750 850 850

Sizes F (mm) – – 330* 330 330* 330*

Sizes G (mm) – – 120* 120 120* 120*

Machine body mass (kg) 1,0 1,0 1,8 2,1 2,1 2,4

7

EN

Code: 224328, 224373, 282298 Code: 224380, 224397, 282311, 224359, 224052

Continue acoustic power level

considered equal to considered A

Minor of 70 dBA

Current nature – frequency

Cfr. Machine plate

Full charge current Cfr. Machine plate

Use nominal voltage Cfr. Machine plate

Auxiliary circuits voltage Cfr. Machine plate

Protection system Double insulation

Protection degree IP X3

Max environment air temperature +40°C

Requested minimum illumination 500 lux

Product directive conformance 2006/42/CE, 2006/95/CE and successive modiﬁcations

and integration, Reg. 1935/2004

GROUP HENDI 224328

1. Machine body

2. Joint for tools

3. Mixer tool

4. Starting button

5. Tool blocking nut

6. Speed variator

8

EN

HENDI 224373, 282298, 224380, 224397, 282311, 224359, 224052

1. Machine body

2. Joint for tools

3. Mixer tool

4. Whisk tool

5. Tool blocking fast clutch

6. Starting button

7. Speed change controls

8. Starting safety button

9. Continuative use button

10. Mixer switch / whisk

NORMAL USE, IMPROPER USE, NOT CORRECT USE OR FORBIDDEN

The machine described in the present instructions

manual for the use is foreseen to be driven from an

only operator skilled and prepared on residual

risks, but with the competence, in safety matter, of

maintenance employees.

The operator should have at least the minimum age

foreseen from the social laws about the work and

having had the necessary technical training at least

from a more expert operator that had him prelimi-

narily trained for the correct use of the machine.

In its NORMAL USE, and reasonably foreseeable,

the machine can be used only to beat, whisk, mince,

crumble, emulsify, reduce in mash, directly in pot or

an adequate container to use in the collective and

institutional restoration.

According to the tool type, it is possible to prepare

directly in pot thick vegetable and pasta soups,

soups, mashed potatoes, creams, batters, mayon-

naise, almonds pulp, cheese creams and what other

like that.

The machine must be taken, supported and han-

dled,

placing the hands in the prescribed zone (see

ﬁgure

pag. 14).

The machine must not be used IN IMPROPER WAY;

in particular:

• It must not be used for domestic uses,

• It must not functioned with parameters different

from those showed in the technical characteris-

tics table,

• For every use of the machine with modalities dif-

ferent from those showed in the present manual,

the manufacturer declines every responsibility,

• The user is responsible of the damages resulting

from the lacked exercise conditions observance

in

• accordance with the agreed technical speciﬁca-

tions and order conﬁrmation,

• The tools must not be functioned on vacuum;

• Not tamper or damage intentionally nor remove

or hide the labels.

9

EN

The machine must not be used IN NOT CORRECT

WAY or FORBIDDEN so some damages or injuries

could be caused for the operator; in particular:

• It is forbidden to draw the electric feeding cable

or the machine to disconnect the feeding plug,

• It is forbidden to put weights on the machine or

on the electric feeding cable,

• It is forbidden to put the electric feeding cable on

sharp parts or with burn danger,

• It is forbidden the machine use with the damaged

and not integer electric feeding cable or with the

control devices;

• It is forbidden to leave the machine off with the

electric feeding cable connected with the feeding

plug,

• It is forbidden to insert any type of object inside

the motor ventilation cap;

• It is forbidden to put the machine above different

objects from the working ground used in the

food ﬁeld of height included between 900 – 110

0mm from the trampling level,

• It is forbidden the use of inﬂammable substanc-

es, corrosive or harmful for the cleaning or

products excessively alkalines as the caustic

soda or ammonia,

• It is forbidden to plunge the machine in water or

in other liquids;

• It is forbidden the not authorized personnel use

and with clothes different from that showed for

the use,

• It is forbidden the use of the whisk tool in the

machines with ﬁxed speed,

• It is forbidden to introduce in the pot with the

machine inserted and in function, products or

objects having characteristics different from

those showed in the normal use, such as for ex-

ample bones, frozen meat, not food products, or

other objects as scarves, etc…,

• It is forbidden to take, support and handle the ma-

chine, placing the hands in different zones from

those showed in the normal use and however

maintain in function the machine with an only

hand,

• It is forbidden to push or lets push from others

the feed products or the ingredients towards

the bottom of the pot with the inserted machine

and in function, and in general introduce the

hands or any other body part, in the pot during the

machine functioning,

• It is forbidden to introduce the machine in the

pot, more than the immersion nick and however

over the tool blocking nut,

• It is forbidden to remove the machine from the

pot, before that the tool is completely stopped

and however before 10 sec from the machine

stop control,

• It is forbidden to work on the tools block systems

before the tool complete stop, and however be-

fore 10 sec from the machine stop control and

connected to the electric feeding,

• It is forbidden the partial removal of the protec-

tions and of the danger signals.

• It is forbidden the functioning without that all the

precautions about the residual risks elimina-

tion have been adopted on behalf of the user,

• It is forbidden to smoke or use free ﬂame devices

and manipulate incandescent materials, unless

some suitable safety measures aren’t adopted,

• It is forbidden to activate or set the control and

blockage devices as knobs or similar both during

the machine functioning both if you aren’t author-

ized.

The user is however responsible of the damages resulting from the lacked observance of the speciﬁed

normal use conditions. For possible doubts you can enquire at the Authorized Assistance Center.

10

EN

3. SAFETY INSTRUCTIONS

INTRODUCTION

The lacked standards and safety procedures ap-

plications can be danger and damage sources.

The machine means bound in the use for the re-

spect, on behalf of the ﬁnal user, of:

• All rules, of insertion in the environment and of

people behavior, ﬁxed from the laws and/or appli-

cable standards; with particular reference to the

ﬁxed plant upstream of the supplied machine and

for its connection / functioning;

• All further instructions and use warnings making

part of the technical / graphic documentation an-

nexed to the same machine.

Except where differently speciﬁed, the personnel

which performs the installation interventions,

connection, maintenance, reassembly, and reuse,

damages or breakdowns, demolition and disman-

tling must be a skilled personnel qualiﬁed in safety

matter and educated on the residual risks, with the

competencies, in safety matter, of the maintenance

employees.

ENVIRONMENTS, WORKING AND PASSING PLACES

The work environment must answer to the directive

89/654/CEE requirements. In the working area for-

eign object must not be present. The employer, in

the directive 89/391/CEE respect, concerning the

measures realization turned to promote the safety

and workers health improvement during the work,

must provide to eliminate or reduce the showed re-

sidual risks as foreseen in the present manual.

WARNINGS ON THE RESIDUAL RISKS

RESIDUAL RISK DUE TO THE FIXED PROTECTIONS REMOVAL, INTERVENTIONS ON BROKEN/WORN PARTS

For any occasion the operator must not try to open

or remove a ﬁxed protection or tamper a safety

device.

In the phase of equipment, maintenance, tools

change and cleaning, and during all further manu-

al operations that happens introducing the hands or

other body parts in the machine dangerous areas,

a residual risk remains due above all to:

• Knocks with machine manufacturing parts,

• Grazing and/or abrasion with machine rough

parts,

• Sharp pain with the sharpened parts,

• Cut with tools sharpened parts.

Besides in the cleaning phase or unblock of the in-

serted pieces in the blades that happens also intro-

ducing the hands near the cutting tools, a residual

risk remains due above all to a cut with tools sharp-

ened parts.

Besides, the operator and the maintenance man

must be skilled for the intervention connected to the

manual operations with open protections, must be

trained on the joined consequent risks and must be

authorized from a responsible person and must use

11

EN

adequate individual protection devices, ﬁve ﬁngers

anti cutting gloves. All interventions on the discs

must happen keeping them with the blades towards

the bottom side.

4. PUT ON SERVICE AND USE

The machine management is allowed only to the

authorized personnel and opportunely educated and

endowed of a sufﬁcient technical experience.

Before to switch on the machine perform the fol-

lowing operations:

• Read with attention the technical documentation,

• Know what protections and emergency devices

are available on the machine, their location and

functioning.

The not authorized use of commercial parts and

accessories making part of the protections and

safety devices can cause some malfunctions and

the ranger situation beginning for the operators.

The operator must besides have received an ade-

quate training.

ASSEMBLY / DISASSEMBLY

The assembly / disassembly operations of every de-

vice of the machine are performed with the ma-

chine

stop and with the plug disconnected from the

socket,

or with the sectioning device in OFF.

The machine assembly goes on in different phases

(for example it is showed the machine with base

body).

TOOLS ASSEMBLY

HENDI 224328

Align and insert the coupling (5) of the mixer (3)

in the clutch (2) of the machine body (1)

Screw the mixer (3) up to fasten

it ﬁrmly to the machine body (1)

TOOLS ASSEMBLY

HENDI 224373, 282298, 224335, 224380, 224397,

282311, 224359, 224052

Align and insert the tools coupling (5) in the quick

clutch (2) of the motor body (1)

Turn the tools (3-4) up to fasten

them ﬁrmly to the machine body (1)

The disassembly activities perform following in

a backwards way the assembly phases previously

described.

12

EN

It is forbidden the use of the whisk tool in the ﬁxed

speed machines (VF)

It is forbidden the whisk tool use in the machines

with variable speed (VV) with the max speed func-

tion

WHISKS ASSEMBLY/DISASSEMBLY

For the disassembly pull the whisks (1) as soon as

they don’t part from a reducer group (2).

To assemble them insert the whisks basis (1) in the

reducer group pivot (2) and push thoroughly.

FUNCTIONING DESCRIPTION

The control devices are designed and manufactured

so as much sure and reliable and resistant to the

service normal stresses, to the foreseeable strains

and to the external agents. Besides they are clearly

visible, locatable and marked from a suitable marking.

Here follow the main control devices are showed:

TYPE/ COLOR REFERENCE / DESCRIPTION

Button / black

“

” / Button for the machine starting control with maintained action

Key / black

“

” /

Max speed switching button only for blender tool (only models HENDI: 224335, 224359, 224380)

Key / black

“ ” / Key for speed increase / safety key for starting (only models HENDI: 224335, 224359, 224380)

Key / black

“

” / Key for speed reduction (only models HENDI: 224335, 224359, 224380)

Key / black

“

” / Key for the machine starting safety (only models HENDI: 224335, 224359, 224380)

Display / red Speed visualization: from 1 to 9 / maximum speed visualization

(only models HENDI: 224335, 224359, 224380)

STARTING

The machine starting with impulse is possible only with a voluntary action on the control device foreseen

for this aim:

Model HENDI: 224328: „ ” only use with maintained action

Models HENDI: 224335, 224359, 224380: „ ” + „ ”. Only use with continued action.

13

EN

STOP

For the stop control push the button .

FUNCTIONING SAFETY

If the machine is under stress, or is submitted to too

long functioning times or submitted at overloaded,

the same stops immediately for the thermal protection

functioning. In this case wait that it is completely

cooled before proceeding to the starting function.

VOLTAGE LACKING

In case of electric feeding breaking or if the machine

is disconnected from the electric net, this last one

will be able to be restarted only following the start-

ing function, after the electric feeding back or the

reconnection to the electric net.

CONTROLS AND VERIFICATIONS BEFORE STARTING

VERIFICATION / CONTROL MODALITIES AND CHECKS

Check that:

• There aren’t inside the pot

extraneous objects

Sight control of the indicated parts, to check of objects or extraneous bodies

lacking as for example different tools, clothes, etc … and that there isn’t however

the food product

Check the cleaning:

• Of the machine external sides

• of the tool along its surface

• of the tool external sides

All indicated parts surfaces, before the machine use must be checked visually to

verify their cleaning. In case of molds presence or other type of dirtiness, provide

with the cleaning procedure in accordance with the chapter 5 indications.

Check the integrity:

• of the ﬁxed protections

• of the machine body

All ﬁxed protections, etc.. must perform the function for which have been

foreseen. Indicated parts sight check to verify their integrity in their surface

external part. The parts must be however changed at the ﬁrst erosion signals

or breaking (cfr. Authorized Assistance Center).

Check the functionality:

• of the control system

parts / control about

the safety;

• of the control devices.

All devices must perform the function for which have been foreseen. Control

directly the devices so that these ones determine the waiting function.

The actuators and all parts must be however changed to the ﬁrst erosion signals

or breaking (cfr. Authorized Assistance Center).

Check the absence:

• of strange noises after

the starting

During the functionality checking of the control devices, if there are strange

noises, due for example to a seizing or mechanical breaks, stop immediately

the machine and activate the maintenance service.

For any intervention type or for the parts change

that are damaged, activate the maintenance ser-

vice. The possible change must happen with manu-

facturer original products or at least of quality,

safety and equivalent characteristics. For analysis

contact the Authorized Assistance Center.

14

EN

PUT IN FUNCTION

The machine operator can put in function the ma-

chine following in order the under reported indica-

tions:

• Positive controls result for the preparation pre-

liminary operations,

• Positive controls result for the electric feeding,

• Plug connection in opportune current socket,

• Positive controls result for the assembly,

• Positive controls result / checks before the starting,

• Positive controls result ﬁnalized to check the re-

spect of all safety conditions,

• Introduce manually the feed product inside the pot,

• With the use of both the hands take the machine

in the foreseen zones:

– Place it with the tool inside the pot,

– Start, maintain and handle it up to the end of

the feed product work,

• When the food product has reached the desired

solidity, stop the machine and placed on a sup-

port adequate bench,

• Discharge manually the pot feed product, taking it

with both the hands and pouring out the feed

product where necessary.

It is forbidden to introduce the machine in the pot,

more than the immersion nick and however over

the tool blocking nut.

It is recommended to make not work the machine

on vacuum.

We recommend to control periodically the tire

gasket integrity placed under the blade (see draw-

ing) and change it if it is damaged or worn.

The gasket integrity prevents the working product

seepage inside the tool avoiding damages to the

mixer.

SWITCHING OFF

In succession, the switching off must follow what

here under indicated:

• Before the switching off wait the working conclu-

sion, or wait that the feed product has reached

the desired solidity,

• Stop the machine releasing the foreseen control

devices,

• Place the machine on a support adequate bench

• Disconnect the plug from the machine from the

feeding socket,

• Perform the cleaning interventions.

15

EN

5. MAINTENANCE, BREAKS RESEARCH AND CLEANING

MAINTENANCE PRESCRIPTIONS

INSULATION FROM THE EXTERNAL FEEDING SOURCES

Before to perform any operation of maintenance,

cleaning and parts change, the external feeding so-

urces must be sectioned and insulated.

Position on “zero” the protection device placed

upstream of the electric equipment feeding line.

Disconnect the general sectioning device and

provide to protect the plug with proper systems.

BREAKS OR DAMAGES RESEARCH AND MOVING ELEMENTS UNBLOCKING

Here follow are indicate the interventions for the breaks or damages research and moving elements

unblocking which can be performed from maintenance men.

TYPE POTENTIAL/S CAUSE/S MODALITY AND COMPARISON

Net voltage

lacking

General Blackout Contact the electric energy distributor

Fuses or magneto thermals

intervention place upstream of

the machine feeding line

After having eliminated the causes that have

determined the protection device intervention,

restore it. In case of problem persistency contact

an electrician technician.

Functioning

intervention

Protection device intervention

inside the machine

Contact an electrician technician: after having

eliminated the causes that have determined the

protection device intervention, restore it.

Cause/s not identiﬁable Contact directly the Authorized Assistance Center

The machine doesn’t

function: the blades

don’t rotate or don’t

perform correctly

the cutting

Feeding voltage lacking Check and restore the electric energy

Sectioning devices set on “OFF” Connect the plug on the feeding socket

Lacked running button

functioning

Check the button efﬁciency and eventually contact

directly the Authorized Assistance Center

Thermal intervention due to

the overheating

Wait the complete cooling before to machine

restarting

Visualization on the display of

the letter “E”

Speed reader damaged, contact directly

the Authorized Assistance Center

16

EN

EXTRAORDINARY MAINTENANCE

For the intervention of extraordinary maintenance,

consequent to breaks or revisions or mechanical

and electric damages, it is necessary an interven-

tion request directly to the Authorized Assistance

Center.

The instructions about the extraordinary mainte-

nance don’t appear in the present instruction

manual for the use and so must be explicitly re-

quested to the manufacturer.

CLEANING

It is forbidden to clean by hand the organs and the

elements in motion.

All cleaning interventions must be started only and

exclusively, after having unloaded the machine

with the food product in working and having insu-

lated from the electric feeding source and from

external energy.

The machine, the electric equipment and the ma-

chine board components must not be ever washed

utilizing water, and not in any kind of jets form and

quantity; so, without “bucket” nor “rubber” nor

“towel”.

Don’t put ever directly the machine in the sink or un-

der the tap.

The machine hygiene level classiﬁcation and the

associated equipment, for the foreseen use, are 2

(two): machine that, after a hygiene risk evaluation,

is in conformance with applicable international

standards requirements, but requests a pro-

grammed disassembly for the cleaning.

FREQUENCY PERSONNEL MODALITY

At the end of every

shift work and however

before the daily use

Operator All the surface and the machine parts destined to come in contact with

the food product or with the food zones (tools external and internal

surface) and the jets zones (tool superior surface connected with the

machine and machine external surface), must be cleaned and disin-

fected with the under reported modalities. For the grinding group dis-

assembly activities see the previous descriptions.

• Scrape the surfaces from the possible food product residuals (for

example with plastic scrapers);

• Clean all the food zone surfaces and jets zone with a morbid damp-

ened clothes (not draining) with detergent diluted in hot water (also

common soap for dishes is good).

 Don’t soak them. With a towel clean inside the grinding mouth. Use

speciﬁc products for steel, which must be liquids (not in cream or

pastries however abrasive) and above all must not contain chlorine.

Against the fat substances the denatured alcohol.

• Rinse with cleaned hot water and successively dry all food zone

surfaces and jets zone with soft clothes that don’t lose coats.

• The mixer tool, being in stainless steel, cannot be washed in dish-

washer, much less the plastic parts.

• The reassembly must happen only following working requirements,

leave the pieces wrapped up in soft dry clothes that don’t lose coats.

17

EN

PERIODS OF LONG INACTIVITY

• During the machine long inactivity periods provide to pass

vigorously on all steel surfaces (especially if stainless) a clothes

soaked of Vaseline oil so that to spread a protective veil.

THINGS NOT TO DO BEFORE OR DURING THE CLEANING:

• Enter towards the moving elements without to be previously

checked of their stop;

• Enter towards the moving elements without have stopped it in

safety stop (blockage in zero position of the electric feeding

sectioning devices)

PRODUCTS NOT TO USE:

• Compressed air with jets towards the zones with ﬂour warehouses

and in general towards the machine;

• Vapor equipment;

• Detergent that contains CHLORO (also if diluted) or its compounds

as: the bleach, the muriatic acid, products to clear the drain,

products for the marble cleaning, in general decalcifying, etc …

can attack the steel composition, staining and oxidizing it

unavoidable.

The only above described products fumes can oxidize and in any

case corrode the steel;

• Steel wool, brushes or abrasive discs produced with other metals

or alloys (ex. Common steel, aluminum, brass, etc…) or tools that

have previously cleaned other metals or alloys, that except to

scratch the surface.

• Detergents in abrasive dust;

• Fuel, solvents or inﬂammable and/or corrosive ﬂuids;

• Substances used to clean the silver.

6. SELLING

Actuation of the directives 2002/95/CE, 2002/96/CE and 2003/108/CE, about the dangerous substances

use reduction in the electric and electronic equipment, as well as the refuse selling.

The barred garbage symbol included on the machine shows the needs that the machinery at the end of its

useful life is sold in appropriate centers.

The present machine rubbish collection at the end of

its life is organized and managed from the producer.

The user that will be able to get rid of the present

machine will have so to contact the producer and fol-

low the new adopted system to allow the equipment

rubbish collection reached at the life end.

The adequate rubbish collection for the equipment

successive starting dismissed to the recycling, to the

treatment and to the environmentally compatible

selling contributes to prevent possible negative ef-

fects on the environment and on the health and fa-

vors the reuse and/or material recycling of the

equipment.

In the machine dangerous substances are not present.

18

EN

The product unauthorized selling on behalf of

the holder behaves the administrative sanctions

application foreseen from the actual standard.

7. Manufacturing materials

In accordance with the functioning and production

requirements, the machine can be constituted with

different typology of manufacturing materials.

GROUP

MATERIALS TYPOLOGY

Stainless Steel AISI 304 Plastic for food

Machine body •

Mixer cutting tool •

Mixer tool bin •

Mixer tool pipe •

Reducer case for whisk tool •

Whisk tool •

8. Electrical diagram

Code: 224328 Code: 224373, 282298

19

EN

Code: 224380, 224397, 282311, 224359, 224052

20

DE

INHALTSVERZEICHNIS

1. INHALT UND BENUTZUNG DER BEDIENUNGSANLEITUNG ................ 22

2. ALLGEMEINE INFORMATIONEN UND EIGENSCHAFTEN ...................... 24

3. SICHERHEITSANLEITUNGEN ................................................................. 28

4. INBETRIEBNAHME UND ANWENDUNG ................................................ 29

5. WARTUNG, FEHLERSUCHE UND REINIGUNG ....................................... 34

6. ENTSORGUNG ......................................................................................... 37

7. BAUMATERIAL ......................................................................................... 38

8. ELEKTRISCHES DIAGRAMM ................................................................... 38

Pagina se încarcă ...

Hendi 224328 Manual de utilizare

Hendi 224328 Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente