Husqvarna 120iTK4-H Manual de utilizare

Tip
Manual de utilizare
120iTK4-H
EN Operator's manual 4-19
DA Brugsanvisning 20-34
DE Bedienungsanweisung 35-51
ES Manual de usuario 52-67
FI Käyttöohje 68-82
FR Manuel d'utilisation 83-99
IT Manuale dell'operatore 100-115
NL Gebruiksaanwijzing 116-131
NO Bruksanvisning 132-146
PT Manual do utilizador 147-162
SV Bruksanvisning 163-177
CS Návod k použití 178-192
ET Kasutusjuhend 193-207
HR Priručnik za korištenje 208-222
HU Használati utasítás 223-238
LT Operatoriaus vadovas 239-253
LV Lietošanas pamācība 254-269
PL Instrukcja obsługi 270-286
RO Instrucţiuni de utilizare 287-302
SK Návod na obsluhu 303-318
SL Navodila za uporabo 319-333
BG Ръководство за експлоатация 334-351
EL Οδηγίες χρήσης 352-369
JA 取扱説明書 370-384
KO 사용자 설명서 385-398
MS Panduan Pengguna 399-414
RU Руководство по эксплуатации 415-432
TR Kullanım kılavuzu 433-447
UK Посібник користувача 448-464
VI Sách hướng dẫn sử dụng 465-479
ZH 操作手册 480-492
2
24
25
13
18 20
17
15
19
14
6
5
4
3
1
7
12
8
9
11
10
15
23
27
16
19
20 18
22
21
26
1
2 3 4 5 6 7
8 9 10 11 12 13
14 15 16 17
18
19
20
21
22
23
A B
C
24
25
26
27
28
A
B
29
AB
30
31
D
A
B
B
C
32
33
34
35
36
37
38
39
A
B
40
41
42
Contents
Introduction.....................................................................4
Safety..............................................................................5
Assembly...................................................................... 11
Operation......................................................................11
Maintenance................................................................. 13
Troubleshooting............................................................15
Transportation, storage and disposal........................... 16
Technical data.............................................................. 16
Declaration of Conformity............................................. 18
Introduction
Product description
Husqvarna 120iTK4-H is a battery telescopic pole hedge
trimmer.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
Intended use
Use the product to cut branches and twigs. Do not use
the product for other tasks.
Product overview
(Fig. 1)
1. Blade
2. Transport guard
3. Housing
4. Position split handle
5. Telescopic function
6. Front handle
7. Shaft
8. Harness support hook
9. Keypad
10. Power trigger lockout
11. Power trigger
12. Rear handle
13. Battery charger QC80
14. Power Cord
15. Power on and warning indicator
16. Battery
17. Battery release buttons
18. Battery indicator button
19. Warning LED
20. Battery indicator LED
21. Start/Stop button
22. SavE button
23. Warning LED
24. Operator's manual
25. Harness
26. Connector
27. Battery charger 40-C80
Symbols on the product
(Fig. 2) WARNING! This product is dangerous.
Injury or death can occur to the operator
or bystanders if the product is not
used carefully and correctly. To prevent
injury to the operator or bystanders,
read and obey all safety instructions in
the operator's manual. Please read the
operator's manual carefully and make
sure that you understand the instructions
before use.
(Fig. 3) Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
(Fig. 4) Use approved protective gloves.
(Fig. 5) The product agrees with the applicable
EC directives.
(Fig. 6) Rated voltage, V
(Fig. 7) Direct current.
(Fig. 8) Do not expose to rain.
(Fig. 9) Keep hands away from blade.
(Fig. 10) Telescopic function.
(Fig. 11) Split function.
(Fig. 12) Turn left to loose the knob, turn right to
tighten the knob.
(Fig. 13) This product does not have insulation.
If the product touches or comes near
high-voltage power lines, it can cause
death or bad injury. The current can
41553 - 008 - 31.10.2022
jump from one point to other points by
arcing. The higher the voltage is, the
larger distance the current can jump. The
current can also go through branches and
other objects, especially when they are
wet. Always keep a minimum distance
of 10 m between the product and high-
voltage power lines and/or all objects that
are touching them. If you must work in
this safe distance, always tell the related
power company to make sure the power is
off before you start work. Keep a minimum
of 15 m to other persons or animals during
the operation.
(Fig. 14) This product conforms to the applicable
UK regulations.
yyyywwxxxx The rating plate shows the serial num-
ber. yyyy is the production year, ww is
the production week.
Note: Other symbols/decals on the product refer to
certficaion recuirements for some markets.
Symbols on the battery and/or on the
battery charger
(Fig. 18)
Recycle this product at a recy-
cling station for electrical and
electronic equipment. (Applies
to Europe only)
(Fig. 15) Fail-safe transformer.
(Fig. 16) Use and keep the battery charger indoors
only.
(Fig. 17) Double insulation.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
the product is incorrectly repaired.
the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
the product is not repaired at an approved service
center or by an approved authority.
Safety
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION: Used if there is a risk of
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note: Used to give more information that is necessary
in a given situation.
General power tool safety warnings
WARNING: Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
Note: Save all warnings and instructions for future
reference. The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
Work area safety
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
1553 - 008 - 31.10.2022 5
Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
Electrical safety
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk
of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of a RCD reduces the risk of
electric shock.
Personal safety
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result
in serious personal injury.
Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal injuries.
Prevent unintentional starting. Ensure the switch is
in the OFF-position before connecting to a power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch
on invites accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached
to a rotating part of the power tool may result in
personal injury.
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away from
moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
The vibration emission during actual use of the
power tool can differ from the declared total value
depending on the ways in which the tool is used.
Operators should identify safety measures to protect
themselves that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger).
Power tool use and care
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it
was designed.
Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
Disconnect the plug from the power source and/or
the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool´s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
61553 - 008 - 31.10.2022
Battery tool use and care
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritations or burns.
Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or
risk of injury.
Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130 °C / 265 °F may cause
explosion.
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk
of fire.
Service
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is
maintained.
Never service damaged battery packs. Service of
battery packs should only be performed by the
manufacturer or authorized service providers.
Safety instructions for hedge trimmer
Keep all parts of the body away from the blade. Do
not remove cut material or hold material to be cut
when blades are moving. Blades continue to move
after the switch is turned off. A moment of inattention
while operating the hedge trimmer may result in
serious personal injury.
Carry the hedge trimmer by the handle with the
blade stopped and taking care not to operate any
power switch. Proper carrying of the hedge trimmer
will decrease the risk of inadvertent starting and
resultant personal injury from the blades.
When transporting or storing the hedge trimmer,
always fit the blade cover. Proper handling of the
hedge trimmer will decrease the risk of personal
injury from the blades.
When clearing jammed material or servicing the unit,
make sure all power switches are off and the power
cord is disconnected. Unexpected actuation of the
hedge trimmer while clearing jammed material or
servicing may result in serious personal injury.
Hold the hedge trimmer by insulated gripping
surfaces only, because the blade may contact
hidden wiring or its own cord. Blades contacting a
"live" wire may make exposed metal parts of the
hedge trimmer "live" and could give the operator an
electric shock.
Keep all power cords and cables away from cutting
area. Power cords or cables may be hidden in
hedges or bushes and can be accidentally cut by the
blade.
Do not use the hedge trimmer in bad weather
conditions, especially when there is a risk of
lightning. This decreases the risk of being struck by
lightning.
To reduce the risk of electrocution, never use the
extended-reach hedge trimmer near any electrical
power lines. Contact with or use near power lines
may cause serious injury or electric shock resulting
in death.
Always use two hands when operating the extended-
reach hedge trimmer. Hold the extended-reach
hedge trimmer with both hands to avoid loss of
control.
Always use head protection when operating the
extended-reach hedge trimmer overhead. Falling
debris can result in serious personal injury.
General safety instructions
WARNING: Read the warning
instructions that follow before you use the
product.
Remove the battery to prevent the product from
being started by accident.
This product is a dangerous tool if you are not
careful or if you use the product incorrectly. This
product can cause serious injury or death to the
operator or others.
Do not use the product if it is changed from its initial
specification. Do not change a part of the product
without approval from the manufacturer. Only use
parts that are approved by the manufacturer.
Injury or death is a possible result of incorrect
maintenance.
Do a check of the product before use. See,
Safety devices on the product on page 9
and
Maintenance on page 13
. Do not use a defective
product. Do the safety checks, maintenance and
service instructions described in this manual.
Children should be supervised to ensure that they
do not play with the product. Never allow children or
other persons not trained in the use of the product
and/or the battery to use or service it. Local laws
may regulate the age of the user.
1553 - 008 - 31.10.2022 7
Keep the product in a locked area to prevent access
for children or persons that are not approved.
Store the product out of reach of children.
Under no circumstances may the design of the
product be modified without the permission of the
manufacturer. Always use original accessories. Non-
authorized modifications and/or accessories can
result in serious personal injury or the death of the
operator and others.
Note: National or Local laws can regulate the use.
Comply to given regulations.
Safety instructions for operation
WARNING: Read the warning
instructions that follow before you use the
product.
If you encounter a situation where you are uncertain
how to proceed you should ask an expert. Contact
your dealer or your service workshop. Avoid all
usage which you consider to be beyond your
capability.
Never use the product if you are fatigued, while
under the influence of alcohol or drugs, medication
or anything that could affect your vision, alertness,
coordination or judgment.
Working in bad weather is tiring and often brings
added risk. Due to the added risk, it is not
recommended to use the machine in very bad
weather, for instance in dense fog, heavy rain,
strong winds, intense cold, risk of lightning, etc.
Faulty cutting attachment can increase the risk of
accidents.
Do not allow children to use or be in the vicinity
of the product. Since the product is easy to start,
children may be able to start it if they are not kept
under full surveillance. This can mean a risk of
serious personal injury. Disconnect the battery when
the product is not under close supervision.
Ensure that no people or animals come closer than
15 meters while you work. When several operators
are working in the same area the safety distance
should be at least 15 meters. Otherwise there is
a risk of serious personal injury. Stop the product
immediately if anyone approaches. Never swing the
product around without first checking behind you to
make sure that no one is within the safety zone.
Ensure that people, animals or other things can
not affect your control of the product or that they
do not come in contact with the cutting attachment
or loose objects that are thrown out by the cutting
attachment. However, do not use the product unless
you are able to call for help in the event of an
accident.
Always inspect the working area. Remove all loose
objects such as stones, broken glass, nails, steel
wire, string, etcetera, that could be thrown out or
become wrapped around the cutting attachment.
Make sure that you can move and stand safely.
Check the area around you for possible obstacles
(roots, rocks, branches, ditches, etcetera) in case
you have to move suddenly. Take great care when
you work on sloping ground.
Keep a good balance and a firm foothold at all times.
Do not overreach.
Deactivate the product before you move to another
area. Attach the transport guard when the product is
not in use.
Never put the product down unless you have
deactivated it. Do not leave the product
unsupervised when it is switched on.
Remove the battery before you pass the product to
another person.
Make sure that no clothes or parts of the body
come in contact with the cutting attachment when
the product is activated.
If anything jams in the cutting attachment while
you operate the product, stop and deactivate the
product. Make sure that the cutting attachment stops
completely. Remove the battery before you clean,
inspect or repair the product and/or the cutting
equipment.
Keep your hands and feet away from the cutting
attachment until it has stopped completely when the
product is deactivated.
Watch out for stumps of branches that can be thrown
out when you cut. Do not cut to close to the ground
where stones and other objects can be thrown out.
Watch out for thrown objects. Always wear
approved eye protection. Never lean over the cutting
attachment guard. Stones, rubbish, etc., can be
thrown up into the eyes which can cause blindness
or serious injury.
Listen out for warning signals or shouts when
you wear hearing protection. Always remove your
hearing protection as soon as the product stops.
Never work from a ladder, stool or any other raised
position that is not fully secured.
This machine produces an electromagnetic field
during operation. This field may under some
circumstances interfere with active or passive
medical implants. To reduce the risk of serious or
fatal injury, we recommend persons with medical
implants to consult their physician and the medical
implant manufacturer before operating this machine.
Always hold the product with both hands. Hold the
product on the right side of your body.
Always stop the product, remove the battery and
make sure that the cutting equipment does not rotate
before you remove material that is wound around the
blade shaft or caught between the guard and the
cutting attachment.
The electromagnetic field during operation can
interfere with the active or passive medical implants.
The persons with medical implants speak to your
81553 - 008 - 31.10.2022
physician and the medical implant manufacturer
before operating this product.
Hold the weight of the product with the harness to
make it easy to operate.
Long-term exposure to noise can result in permanent
hearing impairment. Husqvarna recommends that
operators use approved hearing protection.
Never use a product that has been modified in any
way from its original specification.
Never use a product that is faulty. Carry out the
safety checks, maintenance and service instructions
described in this manual. Some maintenance and
service measures must be carried out by trained
and qualified specialists. See instructions under the
maintenance heading.
Carry out an overall inspection of the product before
use. See the maintenance schedule.
Never allow anyone else to use the machine without
first ensuring that they have read and understood the
contents of the operator’s manual.
Check the working area for foreign objects such as
electricity cables and animals, etc, or other objects
that could damage the cutting attachment, such as
metal items.
Faulty blades can increase the risk of accidents.
Personal protective equipment
WARNING: Read the warning
instructions that follow before you use the
product.
Always use approved personal protective equipment
when you use the product. Personal protective
equipment cannot fully prevent injury but it
decreases the degree of injury if an accident does
occur. Let your dealer help you select the right
equipment.
Use a protective helmet where there is a risk of
falling objects.
(Fig. 19)
Long term exposure to noise can result in damaged
hearing. In general, battery powered products
are relatively quiet but damage can result from
a combination of noise level and long usage.
Husqvarna recommends that operators use hearing
protectors when using products for a longer coherent
time of a day. Continual and regular users should
have their hearing checked regularly.
(Fig. 20)
WARNING: Hearing protectors limit
the ability to hear sounds and warning
signals.
Use approved eye protection. If you use a visor,
you must also use approved protective goggles.
Approved protective goggles must comply with the
ANSI Z87.1 standard in the USAs or EN 166 in EU
countries.
(Fig. 21)
Use gloves when necessary, for example when you
attach, examine or clean the cutting equipment.
(Fig. 22)
Use clothing made of a strong fabric. Always use
heavy, long pants and long sleeves. Do not use
loose clothing that can catch on twigs and branches.
Do not wear jewelry, short pants, sandals or go with
bare feet. Put your hair up safely above shoulder
level.
Keep first aid equipment close at hand.
(Fig. 23)
Safety devices on the product
WARNING: Read the warning
instructions that follow before you use the
product.
In this section the product’s safety features, its purpose
and how checks and maintenance should be carried
out to ensure that it operates correctly. See instructions
under the heading
Product overview on page 4
to find
where these parts are located on your product.
The life span of the product can be reduced and the risk
of accidents can increase if product maintenance is not
carried out correctly and if service and/or repairs are not
carried out professionally. If you need further information
please contact your nearest servicing dealer.
WARNING: Never use a product with
defective safety components. The product's
safety equipment must be inspected and
maintained as described in this section.
If your product fails any of these checks,
contact your service agent to get it repaired.
CAUTION: All servicing and repair work
on the machine requires special training.
This is especially true of the machine′s
safety equipment. If your machine fails
any of the checks described below you
must contact your service agent. When
you buy any of our products we guarantee
the availability of professional repairs and
service. If the retailer who sells your
machine is not a servicing dealer, ask him
for the address of your nearest service
agent.
To do a check of the keypad
1. Push and hold the start/stop button (A). (Fig. 24)
a) The product is on when the LED is on.
b) The product is off when the LED is off.
1553 - 008 - 31.10.2022 9
2. Refer to
To start the SavE function on page 13
for
the function of the SavE button (B).
3. Refer to
Troubleshooting on page 15
if the warning
indicator (C) is on or flashes.
To do a check of the power trigger lockout
The power trigger lockout prevents accidental operation.
When you release the handle, the power trigger and the
power trigger lockout move back to their initial position.
(Fig. 25)
1. Make sure that the power trigger is locked when the
lockout is in its initial position. (Fig. 26)
2. Pull and release the lockout and make sure that it
moves back to its initial position . (Fig. 27)
3. Make sure that the power trigger and the lockout
move freely and that the return spring operates
correctly. (Fig. 28)
4. Start the product, see
To start the product on page
12
.
5. Apply full speed.
6. Release the power trigger and make sure that the
cutting attachment stops fully.
Battery safety
WARNING: Read the warning
instructions that follow before you use the
product.
Only use the BLi series and 40-B series battery. For
details, refer to
Technical data on page 16
. The
battery is software encrypted.
Use the BLi series and 40-B series battery that
is rechargable as a power supply for the related
Husqvarna products only. To prevent injury, do not
use the battery as a power supply for other devices.
Risk of electrical shock. Do not connect the battery
terminals to keys, coins, screws or other metal. This
can cause a short circuit of the battery.
Do not use non-rechargeable batteries.
Do not put objects into the air slots of the battery.
Keep the battery away from sunlight, heat or open
flame. The battery can cause burns and/or chemical
burns.
Keep the battery away from rain and wet conditions.
Keep the battery away from microwaves and high
pressure.
Do not try to disassemble or break the battery.
If the battery leaks, do not let the liquid touch your
body or eyes. If you have touched the liquid, clean
the area with a large quantity of water and soap, and
get medical aid. If you get liquid in your eyes, do not
rub but flush with water for a minimum of 15 minutes
and get medical aid.
Use the battery in temperatures between -10 °C (14
°F) and 40 °C (114 °F).
Do not clean the battery or the battery charger with
water. Refer to
To clean the product, the battery and
the battery charger on page 14
.
Do not use a defective or damaged battery.
Keep batteries in storage away from metal objects
such as nails, screws or jewelry.
Keep the battery away from children.
Battery charger safety
WARNING: Read the warning
instructions that follow before you use the
product.
Risk of electrical shock or short circuit if the safety
instructions are not obeyed.
Do not use other battery chargers than the
one supplied for your product. The recommended
charger is QC80 / 40-C80 when you charge the BLi
series and 40-B series battery.
Do not try to disassemble the battery charger.
Do not use a defective or damaged battery charger.
Do not lift the battery charger by the power cord. To
disconnect the battery charger from a mains socket,
pull out the plug. Do not pull the power cord.
Keep all cables and extension leads away from
water, oil and sharp edges. Make sure that the cable
is not caught between objects, for example, doors,
fences or equivalent.
Do not use the battery charger near flammable
materials or materials that can cause corrosion.
Make sure that the battery charger is not covered.
Pull out the plug to the battery charger if there is
smoke or fire.
Only charge the battery indoors in a location with
good airflow and away from sunlight. Do not charge
the battery outdoors. Do not charge the battery in
wet conditions.
Only use the battery charger where the temperature
is between 5 °C (41 °F) and 40 °C (104 °F). Use the
charger in an environment which has a good airflow,
dry and free from dust.
Do not put objects into the cooling slots of the
battery charger.
Do not connect the battery charger terminals to
metal objects as this can short circuit the battery
charger.
Use approved mains sockets that are not damaged.
Make sure that the cord of the battery charger is not
damaged. If extension cables are used, make sure
that the extension cables are not damaged.
Safety instructions for maintenance
WARNING: Read the warning
instructions that follow before you do
maintenance on the product.
10 1553 - 008 - 31.10.2022
Remove the battery before you do maintenance,
other checks or assemble the product.
The operator must only do the maintenance and
servicing shown in this operator's manual. Turn to
your servicing dealer for maintenance and servicing
of a larger extension.
Do not clean the battery or the battery charger with
water. Strong detergent can cause damage to the
plastic.
If you do not do maintenance, it decreases the
life cycle of the product and increases the risk of
accidents.
Special training is necessary for all servicing and
repair work, especially for the safety devices on the
product. If not all checks in this operator's manual
are approved after you have done maintenance, turn
to your servicing dealer. We guarantee that there are
professional repairs and servicing available for your
product.
Keep the teeth of the blade correctly sharpened.
Obey our recommendations. Also refer to the
instructions on the blade package.
Only use original spare parts.
Always use heavy duty gloves when you repair the
cutting attachment. The blades are very sharp and
can easily cause injuries.
Assembly
Introduction
WARNING: Read and understand the
safety chapter before you assemble the
product.
To assemble the shaft
1. Make sure that the electrical plugs are aligned. (Fig.
29)
2. Connect the ends of the shaft (A) fully.
3. Tighten the screw handle on the hedge trimmer head
side of the shaft (B).
To adjust the length of the shaft
1. Loosen the screw handle at the battery housing side
of the shaft (A). (Fig. 30)
2. Adjust the shaft to an applicable length.
3. Tighten the screw handle (B).
To adjust the harness
Always use the harness when you operate the product.
The harness gives maximum control during operation of
the product. The harness decreases the risk of tiredness
in your arms and back.
1. Put on the harness.
2. Attach the product to the harness support hook.
3. Adjust the length of the harness until the support
hook is roughly level with your right hip. (Fig. 31)
To install the battery charger (40-C80)
on the wall
CAUTION: Do not use an electric
screwdriver to install the battery charger to
the wall. An electric screwdriver can cause
damage to the battery charger.
1. Install the battery charger on the wall with the 2
screws (B). Use wall plugs (A) if it is necessary. (Fig.
32)
2. Install the 2 screw hole plugs (C).
3. Connect the power cord to the battery charger and a
mains socket.
Operation
Introduction
WARNING: Read and understand the
safety chapter before you use the product.
To do before you start the product
1. Examine the work area. Remove objects that can be
thrown out.
2. Examine the cutting attachment. Make sure that the
blades are sharp, and have no cracks and damages.
3. Make sure that the product works correctly. Examine
that all nuts and screws are tight.
4. Make sure that the handle and safety devices are
not damaged and are attached correctly. Do not
operate a product with missing parts or is changed
from its initial specification. Use protective gloves
when it is necessary.
5. Make sure that the covers are not damaged and are
attached correctly, before you operate the product.
1553 - 008 - 31.10.2022 11
Battery
WARNING: Read and understand the
safety chapter before you use the battery.
Read and understand the operator's manual
for the battery and the battery charger.
Keep the battery and the battery charger in the correct
ambient temperatures.
Ambient temperature
Operation of the battery 5 °C-40 °C / 41 °F-104 °F
Ambient temperature
Charging of the battery 5 °C-40 °C / 41 °F-104 °F
Battery status
The display shows the state of charge and if there are
problems with the battery.
(Fig. 33)
LED indicator Battery status (state of charge)
BLi10 40-B70
4 LED lights are on N/A The battery is 76% - 100% charg-
ed.
3 LED lights are on The battery is 76% - 100% charged. The battery is 51% - 75% charged.
2 LED lights are on The battery is 51% - 75% charged. The battery is 26% - 50% charged.
1 LED light is on The battery is 26% - 50% charged. The battery is 6% - 25% charged.
1 LED light flashes The battery is 0% - 25% charged. The battery is 0% - 5% charged.
To charge the battery
Charge the battery if it is the first time that you use it. A
new battery is only 30% charged.
CAUTION: Connect the battery charger
to a power outlet with the voltage and
frequency that is specified on the rating
plate.
The battery does not charge if the battery temperature is
more than 50 °C/122 °F.
1. Connect the power cord to the battery charger.
2. Connect the battery charger to a grounded power
outlet. The charging LED flashes one time. (Fig. 34)
3. Connect the battery to the battery charger. The
charging LED comes on. Charge the battery for
maximum 24 hours. (Fig. 35)
4. Push the battery indicator button, if all the LED
indicators come on, the battery is fully charged.
5. Pull the power plug to disconnect the battery charger
from the power outlet. Do not pull the power cord.
6. Remove the battery from the battery charger.
To connect the battery to the product
WARNING: Only use Husqvarna
original batteries in the product.
1. Make sure that the battery is fully charged.
2. Put the battery into the battery holder of the product.
The battery must move into the holder easily, if not, it
is not installed correctly. (Fig. 36)
3. Push the lower part of the battery and push it in fully
into the battery holder. The battery locks into position
when you hear a click.
4. Make sure that the latches lock in position correctly.
To start the product
1. Push and hold the start/stop button until the green
LED comes on. (Fig. 37)
2. Pull the power trigger lockout rearward and hold the
power trigger.
To operate the product
Start near the ground and move the product up
along the hedge when you cut the sides. (Fig. 38)
Hold the product near your body for a stable work
position. (Fig. 39)
Make sure that the tip of the cutting equipment does
not touch the ground.
Be careful and work slowly until all the branches are
correctly cut.
To adjust the angle of the cutting attachment
The cutting attachment can be adjusted in 7 different
positions.
1. Stop the product and remove the battery. (Fig. 40)
12 1553 - 008 - 31.10.2022
2. Hold the housing (B) tight.
3. Push and hold the lock buttons (A) at the 2 sides of
the housing (B).
4. Move the cutting attachment to the correct angle.
5. Release the lock buttons (A) at the 2 sides.
6. Move the housing (B) up and down until the cutting
attachment locks in position.
To start the SavE function
The product has a SavE function. The SavE function
gives the longest operation time from the battery.
1. Push the SavE button. The LED comes on to show
that the function is on. (Fig. 41)
2. Push the SavE button again to stop the SavE
function.
Automatic shutdown function
The product has an automatic shutdown function that
stops the product if it is not used. The green LED for
start/stop indication goes off and the product stops after
60 seconds.
To stop the product
1. Release the power trigger.
2. Push and hold the start/stop button until the green
LED goes off.
3. Remove the battery from the product. Push the 2
release buttons and pull out the battery. (Fig. 42)
Maintenance
Introduction
WARNING: Read and understand the
safety chapter before you do maintenance
work on the product.
WARNING: Remove the battery before
you do maintenance on the product.
Maintenance schedule
The following is a list of the maintenance steps that you
must do on the product.
1553 - 008 - 31.10.2022 13
Maintenance Before
use Weekly Monthly
Clean the external parts of the product. X
Examine that the start and stop switch works correctly and is not damaged. X
Make sure that the power trigger and the power trigger lockout function correctly
from a safety point of view. X
Make sure that all controls work and are not damaged. X
Make sure that the cutter blade and cutter guard have no cracks and that they
are not damaged. Replace the cutter blade or the cutter guard if they have
cracks or if they have been exposed to impact.
X
Replace the cutter blade if it is bent or damaged. X
Make sure that the screws and nuts are tight. X
Make sure that the battery is not damaged. X
Make sure that the battery is charged. X
Make sure that the battery charger is not damaged. X
Make sure that the screws that hold the cutter blades together are correctly
tightened. X
Do a check of the connections between the battery and the product. Do a check
of the connection between the battery and the battery charger. X
To examine the battery and the battery
charger
1. Examine the battery for damages, for example
cracks.
2. Examine the battery charger for damages, for
example cracks.
3. Make sure that the connection cord of the battery
charger is not damaged and that there are no cracks
in it.
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a dry
cloth. Keep the battery guide tracks clean.
3. Make sure that the terminals on the battery and the
battery charger are clean before the battery is put in
the battery charger or the product.
To examine the blade
1. Clean the blade from unwanted materials with an
anti corrosion cleaning agent before and after you
use the product.
2. Examine the edges of the blade for damages and
deformation.
3. Use a file to remove burrs on the blade.
4. Make sure that the blades move freely.
To clean and lubricate the blades
1. Clean the blades from unwanted materials before
and after you use the product.
2. Lubricate the blades before long periods of storage.
Note: Speak to your servicing dealer for more
information about recommended cleaning agents and
lubricants.
To lubricate the gear
Apply grease to the gear housing if the gear has been
disassembled by an approved servicing dealer.
Use Husqvarna special grease. Speak to your
servicing dealer for more information about
recommended grease.
Only use a small quantity of a special high quality
grease.
CAUTION: Do not fill the gear
housing fully.
14 1553 - 008 - 31.10.2022
Troubleshooting
Keypad
Problem Possible faults Possible solution
Green activate LED
flashing
Low battery voltage. Charge the battery.
The warning indicator
flashes.
Overload. The cutting attachment cannot move freely.
Release the cutting attachment.
Temperature deviation. Let the product become cool.
The power trigger and the start button are
pushed at the same time.
Release the power trigger and push the start
button.
The product does not
start.
Dirt in the battery connectors. Clean the battery connectors with com-
pressed air or a soft brush.
The warning indicator
is on.
It is necessary to do servicing on the product. Speak to your servicing dealer.
Battery
Problem Possible faults Possible solution
Green LED flashes. Low battery voltage. Charge the battery.
Error LED flashes. The battery is empty. Charge the battery.
Temperature deviation. Use the battery in temperatures between
-10°C (14°F) and 40°C (104°F).
Overvoltage. Remove the battery from the battery charger.
Error LED comes on. Cell difference is too much (1V). Speak to your servicing dealer.
Battery charger
Condition Possible faults Possible procedure
The charging LED is red. Permanent battery charger error. Speak to your dealer.
The charging LED flashes green. Temperature deviation, the battery is
too cold or too hot to use or charge.
Let the battery cool down or warm it
up. When the battery has the correct
temperature, it can be used or charg-
ed again. Use the battery charger in
ambient temperatures between 5 °C
(41 °F) and 40 °C (104 ° F).
The charging LED flashes red. Faulty battery Speak to your dealer.
1553 - 008 - 31.10.2022 15
Transportation, storage and disposal
Transportation and storage
The supplied Li-ion batteries obey the Dangerous
Goods Legislation requirements.
Obey the special requirement on package and labels
for commercial transportation, including by third
parties and forwarding agents.
Speak to a person with special training in dangerous
material before you send the product. Obey all
applicable national regulations.
Use tape on open contacts when you put the battery
in a package. Put the battery in the package tightly
to prevent movement.
Remove the battery for storage or transportation.
Put the battery and the battery charger in a space
that is dry and free from moisture and frost.
Do not keep the battery in an area where static
electricity can occur. Do not keep the battery in a
metal box.
Put the battery in storage where the temperature is
between 5°C/41°F and 25°C/77°F and away from
open sunlight.
Put the battery charger in storage where the
temperature is between 5 °C/41 °F and 45°C/113°F
and away from open sunlight.
Use the battery charger only when the surrounding
temperature is between 5°C/41°F and 40°C/104°F.
Charge the battery 30% to 50% before you put it in
storage for long periods.
Put the battery charger in storage in a space that is
closed and dry.
Keep the battery away from the battery charger
during storage. Do not let children and other not
approved persons to touch the equipment. Keep the
equipment in a space that you can lock.
Clean the product and do a full servicing before you
put the product in storage for a long time.
Use the transportation guard on the product to
prevent injuries or damage on the product during
transportation and storage.
Attach the product safely during transportation.
Disposal of the battery, battery charger
and product
Symbols on the product or the package of the product
means that the product is not domestic waste. Recycle
it at a recycling station for electrical and electronic
equipment. This helps to prevent damage to the
environment and to persons.
Get in touch with your local authorities, domestic waste
service or your dealer for more information about how to
recycle your product.
Technical data
Technical data
120iTK4-H
Motor
Motor type PMDC 36V
Weight
Weight without battery, kg 4.6
Noise emissions 1
Sound power level, measured dB(A) 91.32
Sound power level, guaranteed LWA dB(A) 94
Sound levels 2
1Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive
2000/14/EC. The difference between guaranteed and measured sound power is that guaranteed sound power
also includes dispersion in the measurement result and the variations between different products of the same
model refer to Directive 2000/14/EC.
2Typical statistical dispersion for equivalent sound pressure level is a standard deviation of 3 dB (A).
16 1553 - 008 - 31.10.2022
120iTK4-H
Sound pressure level at the operator's ear, measured according to EN 62841-1 and
EN 62841-4-2, dB(A)
81.3
Vibration levels 3
Vibration levels (ah) at front/rear handles, m/s2. Refer to EN 62841-1 and EN
62841-4-2.
1.223/0.816
Cutting equipment
Type Double sided
Blade length, mm 500
Blade speed cuts/min in the SavE mode 2250
Blade speed cuts/min not in the SavE mode 2800
Approved battery chargers
Battery charger QC80 40-C80
Input voltage, V 100-240 100-240
Frequency, Hz 50-60 50-60
Power, W 100 72
Output voltage, V DC/A 36/2 43/1.6
Approved batteries for the product
Battery BLi10 40-B70
Type Lithium-ion Lithium-ion
Battery capacity, Ah Refer to battery rating decal Refer to battery rating decal
Nominal voltage, V 36 36
Weight, kg 0.7 0.8
3Reported date for vibration level has a typical statistical dispersion (standard deviation) of 1.5 m/s2.
The declared vibration total value has been measured in accordance with a standard test method and may be
used for comparing on tool with another.
The declared vibration total value may also be used in a preliminary assessment of exposure.
1553 - 008 - 31.10.2022 17
Declaration of Conformity
EU Declaration of Conformity
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden,
tel: +46-36-146500, declare under our sole responsibility
that the product:
Description Battery telescopic pole hedge trimmer
Brand Husqvarna
Type / Model 120iTK4-H
Identification Serial number dating 2022 and onwards
complies fully with the following EU directives and
regulations:
Regulation Description
2006/42/EC “relating to machinery”
2014/30/EU “relating to electromagnetic compatibility”
2000/14/EC “relating to outdoor noise”
2011/65/EU “restriction of use of certain hazardous substances”
The following standards have been applied:
EN 62841-1:2015, EN 62841-4-2:2019,
EN 55014-1:2017+A11, EN 55014-2:2015,
CISPR12:2007+A1 2009, EN IEC 63000:2018.
TÜV Rheinland LGA Products GmbH, Tillystrasse 2,
D-90431 Nuernberg, Germany, has performed voluntary
type examination on behalf of Husqvarna AB.
The certificate has the number: AM 50491653 0001.
Huskvarna, 2022-05-13
Claes Losdal, R&D Manager, Husqvarna AB
Responsible for technical documentation
18 1553 - 008 - 31.10.2022
UK Declaration of Conformity
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declare on our sole responsibility that
the product:
Description Battery telescopic pole hedge trimmer
Brand Husqvarna
Type / Model 120iTK4-H
Identification Serial number dating 2022 and onwards
complies fully with the following UK regulations:
Description
The Supply of Machinery (Safety) Regulations 2008
Electromagnetic Compatibility Regulations 2016
The Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001, schedule 8
The Restriction of the use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations
2012
and that the following standards and/or technical
specifications are applied:
EN 62841-1:2015, EN 62841-4-2:2019,
EN 55014-1:2017+A11, EN 55014-2:2015,
CISPR12:2007+A1 2009, EN IEC 63000:2018.
For information relating to noise emissions, refer to
Technical data on page 16
.
Huskvarna, 2022-05-13
Claes Losdal, R&D Manager, Husqvarna AB
Responsible for technical documentation
UK Importer:
Husqvarna UK Ltd
Preston Road, Co. Durham
DL5 6UP
1553 - 008 - 31.10.2022 19
Indhold
Indledning..................................................................... 20
Sikkerhed......................................................................21
Montering......................................................................27
Drift............................................................................... 28
Vedligeholdelse............................................................ 29
Fejlfinding..................................................................... 30
Transport, opbevaring og bortskaffelse........................ 31
Tekniske data............................................................... 32
Overensstemmelseserklæring...................................... 34
Indledning
Produktbeskrivelse
Husqvarna 120iTK4-H er en batteridrevet teleskopisk
stanghækkeklipper.
Der arbejdes konstant på at øge din sikkerhed og
effektivitet under betjening. Spørg serviceforhandleren
for at få yderligere oplysninger.
Anvendelsesformål
Brug produktet til beskæring af grene og kviste. Brug
ikke produktet til andre opgaver.
Produktoversigt
(Fig. 1)
1. Kniv
2. Transportbeskyttelse
3. Hus
4. Position for knækket håndtag
5. Teleskopfunktion
6. Forreste håndtag
7. Aksel
8. Ophængskrog til sele
9. Tastatur
10. Strømudløserlås
11. Strømudløser
12. Bageste håndtag
13. Batterioplader QC80
14. Elledning
15. Tænd og advarselsindikator
16. Batteri
17. Knapper til udløsning af batteri
18. Batteriindikatorknap
19. LED-indikator for advarsel
20. LED-indikator for batteri
21. Start/Stop-knap
22. SavE-knap
23. LED-indikator for advarsel
24. Brugervejledning
25. Rygsæksele
26. Stik
27. Batterioplader 40-C80
Symboler på produktet
(Fig. 2) ADVARSEL! Dette produkt er farligt.
Personskade eller død kan forekomme
hos brugeren eller personer i nærheden,
hvis produktet ikke anvendes forsigtigt
og korrekt. For at undgå, at brugeren
eller personer i nærheden kommer til
skade, skal alle sikkerhedsinstruktioner i
brugervejledningen læses og overholdes.
Læs brugervejledningen omhyggeligt
igennem, og sørg for at have
forstået instruktionerne, inden du bruger
produktet.
(Fig. 3) Brug en beskyttelseshjelm på steder,
hvor du kan få genstande i hovedet.
Brug godkendt høreværn. Brug godkendt
øjenværn.
(Fig. 4) Brug godkendte beskyttelseshandsker.
(Fig. 5) Produktet er i overensstemmelse med
gældende EF-direktiver.
(Fig. 6) Nominel spænding, V
(Fig. 7) Jævnstrøm.
(Fig. 8) Må ikke udsættes for regn.
(Fig. 9) Hold hænderne væk fra klingen.
(Fig. 10) Teleskopfunktion.
(Fig. 11) Knækfunktion.
(Fig. 12) Drej grebet til venstre for at løsne, drej
grebet til højre for at spænde.
(Fig. 13) Dette produkt har ikke isolering. Hvis
produktet kommer i kontakt med
20 1553 - 008 - 31.10.2022
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303
  • Page 304 304
  • Page 305 305
  • Page 306 306
  • Page 307 307
  • Page 308 308
  • Page 309 309
  • Page 310 310
  • Page 311 311
  • Page 312 312
  • Page 313 313
  • Page 314 314
  • Page 315 315
  • Page 316 316
  • Page 317 317
  • Page 318 318
  • Page 319 319
  • Page 320 320
  • Page 321 321
  • Page 322 322
  • Page 323 323
  • Page 324 324
  • Page 325 325
  • Page 326 326
  • Page 327 327
  • Page 328 328
  • Page 329 329
  • Page 330 330
  • Page 331 331
  • Page 332 332
  • Page 333 333
  • Page 334 334
  • Page 335 335
  • Page 336 336
  • Page 337 337
  • Page 338 338
  • Page 339 339
  • Page 340 340
  • Page 341 341
  • Page 342 342
  • Page 343 343
  • Page 344 344
  • Page 345 345
  • Page 346 346
  • Page 347 347
  • Page 348 348
  • Page 349 349
  • Page 350 350
  • Page 351 351
  • Page 352 352
  • Page 353 353
  • Page 354 354
  • Page 355 355
  • Page 356 356
  • Page 357 357
  • Page 358 358
  • Page 359 359
  • Page 360 360
  • Page 361 361
  • Page 362 362
  • Page 363 363
  • Page 364 364
  • Page 365 365
  • Page 366 366
  • Page 367 367
  • Page 368 368
  • Page 369 369
  • Page 370 370
  • Page 371 371
  • Page 372 372
  • Page 373 373
  • Page 374 374
  • Page 375 375
  • Page 376 376
  • Page 377 377
  • Page 378 378
  • Page 379 379
  • Page 380 380
  • Page 381 381
  • Page 382 382
  • Page 383 383
  • Page 384 384
  • Page 385 385
  • Page 386 386
  • Page 387 387
  • Page 388 388
  • Page 389 389
  • Page 390 390
  • Page 391 391
  • Page 392 392
  • Page 393 393
  • Page 394 394
  • Page 395 395
  • Page 396 396
  • Page 397 397
  • Page 398 398
  • Page 399 399
  • Page 400 400
  • Page 401 401
  • Page 402 402
  • Page 403 403
  • Page 404 404
  • Page 405 405
  • Page 406 406
  • Page 407 407
  • Page 408 408
  • Page 409 409
  • Page 410 410
  • Page 411 411
  • Page 412 412
  • Page 413 413
  • Page 414 414
  • Page 415 415
  • Page 416 416
  • Page 417 417
  • Page 418 418
  • Page 419 419
  • Page 420 420
  • Page 421 421
  • Page 422 422
  • Page 423 423
  • Page 424 424
  • Page 425 425
  • Page 426 426
  • Page 427 427
  • Page 428 428
  • Page 429 429
  • Page 430 430
  • Page 431 431
  • Page 432 432
  • Page 433 433
  • Page 434 434
  • Page 435 435
  • Page 436 436
  • Page 437 437
  • Page 438 438
  • Page 439 439
  • Page 440 440
  • Page 441 441
  • Page 442 442
  • Page 443 443
  • Page 444 444
  • Page 445 445
  • Page 446 446
  • Page 447 447
  • Page 448 448
  • Page 449 449
  • Page 450 450
  • Page 451 451
  • Page 452 452
  • Page 453 453
  • Page 454 454
  • Page 455 455
  • Page 456 456
  • Page 457 457
  • Page 458 458
  • Page 459 459
  • Page 460 460
  • Page 461 461
  • Page 462 462
  • Page 463 463
  • Page 464 464
  • Page 465 465
  • Page 466 466
  • Page 467 467
  • Page 468 468
  • Page 469 469
  • Page 470 470
  • Page 471 471
  • Page 472 472
  • Page 473 473
  • Page 474 474
  • Page 475 475
  • Page 476 476
  • Page 477 477
  • Page 478 478
  • Page 479 479
  • Page 480 480
  • Page 481 481
  • Page 482 482
  • Page 483 483
  • Page 484 484
  • Page 485 485
  • Page 486 486
  • Page 487 487
  • Page 488 488
  • Page 489 489
  • Page 490 490
  • Page 491 491
  • Page 492 492
  • Page 493 493
  • Page 494 494
  • Page 495 495
  • Page 496 496

Husqvarna 120iTK4-H Manual de utilizare

Tip
Manual de utilizare