Ubiquiti UniFi SWITCH 8 60W Ghid de inițiere rapidă

Marca: Ubiquiti

Model: UniFi SWITCH 8 60W

Tip: Ghid de inițiere rapidă

Acest manual este potrivit și pentru

Enterprise Gateway Router

with Gigabit Ethernet

Model: USG

Introduction

Thank you for purchasing the Ubiquiti Networks® UniFi®

Security Gateway. This Quick Start Guide is designed to guide

you through installation and also includes warrantyterms.

Package Contents

UniFi Security Gateway Power Adapter

(12V, 1A)

Power Cord

Enterprise Gateway Router

with Gigabit Ethernet

Model: USG

Screws

(Qty. 2)

Screw Anchors

(Qty. 2)

Quick Start Guide

installer’s responsibility to follow local country regulations and indoor cabling requirements.

UniFi Controller System Requirements

• Microsoft Windows 8, MacOSX, or Linux

• Java Runtime Environment 1.6 (or above)

• Web Browser: Mozilla Firefox, Google Chrome, Microsoft

Edge, or Microsoft Internet Explorer 11

• UniFi Controller software v5.4 or higher (available at:

www.ubnt.com/download/unifi)

Network Requirements

A UniFi Cloud Key or management station running the UniFi

Controller software, located either on-site and connected to

the same Layer-2 network, or off-site in the cloud or NOC

US-16-150W

USG

(DHCP Server)

Internet

UAP-AC-PRO UAP-AC-LR

LAN

WAN

UniFi Cloud Key

(UniFi Controller)

Remote Access to

UniFi Controller

UAP-AC-M-PRO

13.2 GB

GUI 5.0.2075

REFRESH RATE CURRENT SITE USERNAME

minutes Default UBNT

29.6 1 5 18

WAN

LAN

WLAN

LATENCY THROUGHPUT

msec

DOWNLOADTHROUGHPUT&LATENCY DEVICESON 2.4 GHZ CHANNEL

DEVICESON 5 GHZ CHANNEL

Mbps

ACTIVE DEVICE ACTIVE DEVICES ACTIVE DEVICES

0.2

0.01

118

229

413

700

116

200

0.9

SPEED TEST

Inacve Inacve

Pending Pending

Inacve

Pending

40 40msec

30msec

20msec

10msec

msec

Mbps

UPLOAD

DEVICES CLIENTS

WAN

Ubiqui Streaming Media 6.49 GB

3.44 GB

921 MB

813 MB

1.25 GB

379 MB

Network Protocols

Web / Web 2.0

Security Update

Unknown

Other

NestLabs

Google

Desktop/Laptop

NAS

Other

LAN

WLAN

DEEP PACKET INSPECTION

THROUGHPUT& LATENCY

Avg/Max Throughput Latency

12HRS

NOW

HRS

40 44 48 52 56 60 64

100 104 108

112

116 120 124 128

132 136 140 144 149 153 157 165161

2 3 4 5 6 7 8 9 10 11

1Mbps

0.8Mbps

0.6Mbps

0.4

Mbps

0.2Mbps

24HRS 12HRS NOW

Mbps

msec

CLIENTS TRAFFICDEVICES

Sample Network Diagram

All UniFi devices support off-site management controllers. For

setup details, see the User Guide on our website at:

www.ubnt.com/download/unifi

Hardware Overview

Ports Panel

Interface Description

Console

RJ45 serial console port for CLI management.

Use a RJ45-to-DB9 serial console cable to

connect the Console port to your computer.

Then configure using the following settings:

• Baud rate 115200

• Data bits 8

• Parity NONE

• Stop bits 1

• Flow control NONE

Reset

Resets to factory defaults. The UniFi Security

Gateway should be powered on. Press and hold

the Reset button for about 10seconds until

the right LED on the WAN 2 / LAN 2 port starts

flashing and then becomes solidly lit. After a

few seconds, the LED will turn off, and the UniFi

Security Gateway will automatically reboot.

WAN 1

Supports 10/100/1000 Ethernet WAN

connections. Default setting is DHCP client.

LAN 1

Supports 10/100/1000 Ethernet LAN

connections. Default setting is DHCP Server.

Server IP: 192.168.1.1/24

WAN 2 /

LAN 2

Supports 10/100/1000 Ethernet connections.

Configure the port using the UniFi Security

Gateway configuration interface.

LEDs

Power Speed/Link/Act

Status

LED State Status

Status Indicator

Status

White Fully Booted; Not Adopted

Blue Adopted and Provisioned

Alternating

White/Blue

Device Firmware is

Upgrading

Blue

Flashing

Device Locator Activated

from UniFi Controller

Console

Power

Off Power Off

Green Power On

Ethernet

Speed/

Link/

Act

Off No Link

Amber

Link Established at

10/100 Mbps

Amber

Flashing

Link Activity at

10/100 Mbps

Green

Link Established at

1000 Mbps

Green

Flashing

Link Activity at

1000 Mbps

Hardware Installation

The UniFi Security Gateway can be used on a level, stable

surface, or mounted to a wall with the included screws and

anchors. If you are not going to mount the UniFi Security

Gateway on a wall, then skip to the section, Connecting Power.

WARNING: To reduce the risk of fire or electric shock, do

not expose this product to rain or moisture.

WARNING: FAILURE TO PROVIDE PROPER VENTILATION

MAY CAUSE FIRE HAZARD. KEEP AT LEAST 20 MM OF

CLEARANCE NEXT TO THE VENTILATION HOLES FOR

ADEQUATE AIRFLOW.

Wall-Mounting

To mount the UniFi Security Gateway on a wall, you will need a

drill, a 6mm drill bit, and a Phillips screwdriver.

1. Use a 6 mm drill bit to drill two holes 90 mm apart. Insert a

Screw Anchor into each hole.

90 mm

*640-00120-04*

640-00120-04

2. Use a Phillips screwdriver to secure a Screw into each

anchor. Leave a clearance of approximately 3 mm between

the screw head and the wall.

3 mm

3. Position the UniFi Security Gateway over the Screws, and

insert the Screws into the wall-mount slots located on the

bottom of the UniFi Security Gateway. Then slide the UniFi

Security Gateway down to lock it into place.

12VDC

Connecting Power

1. Connect the Power Adapter to the power port.

2. Connect the Power Cord to the Power Adapter. Connect the

other end of the Power Cord to a grounded powersource.

Network Connections

1. Connect an Ethernet cable from a broadband modem or

WAN to the WAN 1 port.

2. Connect an Ethernet cable from a network switch to the

LAN 1 port.

Note:

LAN 1 is set to DHCP Server by default.

Software Installation

Download and install the latest version of the UniFi Controller

software at: www.ubnt.com/download/unifi

From a management station connected to the same Layer-2

network, launch the installer and follow the on-screen

instructions.

Note: If you already have UniFi Controller v5.4 or higher

installed, go to the section, Adopting the UniFi Security

Gateway.

1. The Ubiquiti UniFi Controller window will appear. Click

Launch a Browser to Manage the Network.

2. Select your country and time zone. Alternatively, you can

click restore from a previous backup to use a file that

contains your backup settings. Click Next.

3. The UniFi Controller will discover the UniFi Security

Gateway with the default IP Address,192.168.1.1. Select the

device, and click Next.

4. Create an SSID (wireless network name) and Security

Key. Click Next. If you do not have any UniFi APs on the

network, click Skip.

5. Create an Admin Name and Password for super admin

access to the UniFi Controller. Confirm the Password, and

click Next.

6. Review the UniFi Controller settings. Click Finish to

complete the UniFi Setup Wizard.

7. The login screen for the UniFi Controller will appear. Enter

the Admin Name and Password that you created in the

UniFi Setup Wizard. Click Login.

The UniFi Controller dashboard window will appear.

Adopting the UniFi Security Gateway

1. From the UniFi Controller dashboard, click Devices in the

left menu bar.

2. In the Devices window, locate UniFi Gateway in the list of

devices under the Model column. To adopt and provision

the gateway, click Adopt.

3. The Status Indicator on the UniFi Security Gateway will turn

blue to confirm that it is successfully adopted.

Optional WAN Port Configuration via Layer 3

By default, the WAN port is set to DHCP so it can be assigned

network settings by the service provider. To change the

setting, connect a computer directly (or through a switch) to

the LAN 1 port of the UniFi Security Gateway.

1. From a web browser, go to https://setup.ubnt.com/

https://setup.ubnt.com

2. The UniFi Gateway login window will appear. Enter your

Username and Password. Click Sign In.

Note: If the UniFi Security Gateway has not been

adopted by a UniFi Controller, the login window will

be skipped and the Setup window will appear.

3. In the Setup window, click Edit Configuration to configure

the WAN port to DHCP, Static IP, or PPPoE.

For information on using the UniFi Controller software, refer to

the User Guide located on our website at:

www.ubnt.com/download/unifi

Specifications

UniFi Security Gateway

Dimensions 135 x 135 x 28.3 mm

(5.32 x 5.32 x 1.11")

Weight 366 g (12.9 oz)

Networking Interfaces

Serial Console Port

Data Ports

(1) RJ45 Serial Port

(3) 10/100/1000 Ethernet Ports

Max. Power Consumption 7W

Power Supply 12VDC, 1A Power Adapter (Included)

Supported Voltage Range 9 to 24VDC

LEDs

System

Serial Console Port

Data Ports

Status

Power

Speed/Link/Activity

Layer 3 Forwarding

Performance

Packet Size: 64 Bytes

Packet Size: 512Bytes

or Larger

1,000,000 pps

3 Gbps (Line Rate)

Processor Dual-Core 500 MHz, MIPS64

with Hardware Acceleration

for Packet Processing

System Memory 512 MB DDR2 RAM

On-Board Flash Storage 2 GB

Rackmount Yes

Operating Temperature -10 to 45° C (14 to 113° F)

Operating Humidity 10 to 90% Noncondensing

Certications CE, FCC, IC

Safety Notices

1. Read, follow, and keep these instructions.

2. Heed all warnings.

3. Only use attachments/accessories specified by the manufacturer.

WARNING: Failure to provide proper ventilation may

cause fire hazard. Keep at least 20 mm of clearance next

to the ventilation holes for adequate airflow.

WARNING: To reduce the risk of fire or electric shock, do

not expose this product to rain or moisture.

WARNING: Do not use this product in a location that can

be submerged by water.

WARNING: Avoid using this product during an electrical

storm. There may be a remote risk of electric shock from

lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current

requirements indicated on the manufacturer’s label. Connection to a

different power source than those specified may result in improper

operation, damage to the equipment or pose a fire hazard if the

limitations are not followed.

2. There are no operator serviceable parts inside this equipment. Service

should be provided only by a qualified service technician.

3. This equipment is provided with a detachable power cord which has

an integral safety ground wire intended for connection to a grounded

safety outlet.

a. Do not substitute the power cord with one that is not the provided

approved type. Never use an adapter plug to connect to a 2-wire

outlet as this will defeat the continuity of the grounding wire.

b. The equipment requires the use of the ground wire as a part of the

safety certification, modification or misuse can provide a shock

hazard that can result in serious injury or death.

c. Contact a qualified electrician or the manufacturer if there

are questions about the installation prior to connecting the

equipment.

d. Protective earthing is provided by Listed AC adapter. Building

installation shall provide appropriate short-circuit backup

protection.

e. Protective bonding must be installed in accordance with local

national wiring rules and regulations.

Limited Warranty

UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the

product(s) furnished hereunder (the “Product(s)”) shall be free from defects

in material and workmanship for a period of one (1) year from the date

of shipment by UBIQUITI NETWORKS under normal use and operation.

UBIQUITI NETWORKS’ sole and exclusive obligation and liability under

the foregoing warranty shall be for UBIQUITI NETWORKS, at its discretion,

to repair or replace any Product that fails to conform to the above

warranty during the above warranty period. The expense of removal and

reinstallation of any Product is not included in this warranty. The warranty

period of any repaired or replaced Product shall not extend beyond its

original term.

Warranty Conditions

The above warranty does not apply if the Product:

(I) has been modified and/or altered, or an addition made thereto,

except by Ubiquiti Networks, or Ubiquiti Networks’ authorized

representatives, or as approved by Ubiquiti Networks in writing;

(II) has been painted, rebranded or physically modified in any way;

(III) has been damaged due to errors or defects in cabling;

(IV) has been subjected to misuse, abuse, negligence, abnormal physical,

electromagnetic or electrical stress, including lightning strikes, or

accident;

(V) has been damaged or impaired as a result of using third party

firmware;

(VI) has no original Ubiquiti MAC label, or is missing any other original

Ubiquiti label(s); or

(VII) has not been received by Ubiquiti within 30 days of issuance of

the RMA.

In addition, the above warranty shall apply only if: the product has been

properly installed and used at all times in accordance, and in all material

respects, with the applicable Product documentation; all Ethernet cabling

runs use CAT5 (or above), and for outdoor installations, shielded Ethernet

cabling is used, and for indoor installations, indoor cabling requirements

are followed.

Returns

No Products will be accepted for replacement or repair without obtaining

a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS

during the warranty period, and the Products being received at UBIQUITI

NETWORKS’ facility freight prepaid in accordance with the RMA process of

UBIQUITI NETWORKS. Products returned without an RMA number will not

be processed and will be returned freight collect or subject to disposal.

Information on the RMA process and obtaining an RMA number can be

found at: www.ubnt.com/support/warranty

Disclaimer

EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI

NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA,

SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM

AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND,

EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO,

REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY,

ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY,

SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS

FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT AND ANY

WARRANTIES ARISING FROM ANY COURSE OF DEALING, USAGE OR

TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS AND SERVICES.

BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI NETWORKS NOR

ITS THIRD PARTY PROVIDERS CONTROL BUYER’S EQUIPMENT OR THE

TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING

THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE

SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS

AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS

FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD

PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS,

DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT

CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY

OF THE FOREGOING. In addition, UBIQUITI NETWORKS does not warrant

that the operation of the Products will be error-free or that operation will

be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible

for damages or claims of any nature or description relating to system

performance, including coverage, buyer’s selection of products (including

the Products) for buyer’s application and/or failure of products (including

the Products) to meet government or regulatory requirements.

Limitation of Liability

EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL

UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR

DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES

(INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING

OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE

PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER

LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES.

Note

Some countries, states and provinces do not allow exclusions of implied

warranties or conditions, so the above exclusion may not apply to you. You

may have other rights that vary from country to country, state to state, or

province to province. Some countries, states and provinces do not allow the

exclusion or limitation of liability for incidental or consequential damages,

so the above limitation may not apply to you. EXCEPT TO THE EXTENT

ALLOWED BY LOCAL LAW, THESE WARRANTY TERMS DO NOT EXCLUDE,

RESTRICT OR MODIFY, AND ARE IN ADDITION TO, THE MANDATORY

STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF ANY SOFTWARE

(EMBEDDED IN THE PRODUCT) TO YOU. The United Nations Convention

on Contracts for the International Sale of Goods shall not apply to any

transactions regarding the sale of the Products.

Compliance

FCC

Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including

interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. Operations of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to

correct the interference at his own expense.

ISED Canada

CAN ICES-3(A)/NMB-3(A)

This Class A digital apparatus complies with Canadian CAN ICES-3(A).

CAN ICES-3(A)/NMB-3(A)

Cet appareil numérique de la classe A est conforme à la norme NMB-3(A)

Canada.

Australia and New Zealand

Warning: This is a Class A product. In a domestic environment this

product may cause radio interference in which case the user may

be required to take adequate measures.

CE Marking

CE marking on this product represents the product is in compliance with all

directives that are applicable to it.

Pagina se încarcă ...

Ubiquiti UniFi SWITCH 8 60W Ghid de inițiere rapidă

Marca: Ubiquiti

Model: UniFi SWITCH 8 60W

Tip: Ghid de inițiere rapidă

Acest manual este potrivit și pentru

Descărcați PDF

raport

în alte limbi

English: Ubiquiti UniFi SWITCH 8 60W Quick start guide
italiano: Ubiquiti UniFi SWITCH 8 60W Guida Rapida

Ubiquiti UniFi SWITCH 8 60W Ghid de inițiere rapidă

Acest manual este potrivit și pentru

Ubiquiti UniFi SWITCH 8 60W Ghid de inițiere rapidă

în alte limbi

Lucrări conexe

Alte documente