Pioneer ND-DVR100 Manual de utilizare

Marca: Pioneer

Model: ND-DVR100

Tip: Manual de utilizare

CYR1207-B < 1 > CYR1207-B < 2 > CYR1207-B < 3 > CYR1207-B < 4 >

Thank you for buying this Pioneer product. Please read through these instructions so

you will know how to operate your model properly. After you have finished reading the

instructions, keep this document in a safe place for future reference.

Always read and follow the “Safety Precautions” described in this manual when in-

stalling this product in a vehicle. There is a risk of accident and injury if this product is

installed using methods other than those described in this manual, or if parts are used

other than those described in this manual. P

ioneer Corporation accepts no responsibility

whatsoever in these cases.

< KNGZ18B >< CYR1207-B >

Owner’s Manual

DASH CAMERA

ND-DVR100

Safety Precautions

Always observe the precautions described here to pre-

vent harm to yourself and others and to prevent damage

to property before it happens.

Internal Rechargeable Lithium-ion Battery

This device uses an internal rechargeable lithium

ion battery that should last the lifetime of the

device. If you suspect your battery may be dead,

try charging it several times. If the battery does not

recharge, please consult Pioneer support.

Important safeguards

WARNING

⨋

Do not install this product in your vehicle if its

location or use would obstruct the driver’s clear view

of the road or the operation of any vehicle airbag. It

is also the driver’s responsibility to know and comply

with the laws, rules, and regulations of the driving

location, including, for example, passenger privacy

rights, and not to use the device in any location where

its installation or use is prohibited.

⨋

The laws in your location may require you to provide no-

tice to passengers that a recording device is in use. If so,

you should place the notice sticker in a location clearly

visible to your passengers.

⨋

Any obstruction of or other interference with the air-

bag, either deployed or non-deployed, or with the clear

view of the road must be avoided and, accordingly,

professional installation is required.

⨋

We recommend that this product be set up and

installed by a technician who has special training and

experience in mobile electronics.

Important safety information

WARNING

⨋

Do not allow this product to come into contact with

liquids. Electrical shock could result. Also, damage

to the product, smoke, and overheating could result

from contact with liquids.

⨋

If liquid or foreign matter should get inside this prod-

uct, park your vehicle in a safe place, turn the ignition

switch off (ACC OFF) and unplug the cigarette lighter

plug immediately, and consult your dealer or the nearest

authorized Pioneer Service Station. Do not use this prod-

uct in this condition because doing so may result in a

fire, electric shock, or other failure.

⨋

If you notice smoke, a strange noise or odor from

this product, or any other abnormal signs on the LCD

screen, turn off the power immediately and consult

your dealer or the nearest authorized Pioneer Service

English

Declaration of Conformity with regard to the Radio Equipment Directive 2014/53/EU

Manufacturer:

Pioneer Corporation

28-8, Honkomagome 2-chome, Bunkyo-ku,

Tokyo 113-0021, JAPAN

EU Representative's & Importer:

Pioneer Europe NV

Haven 1087,Keetberglaan 1,9120 Melsele,Belgium

http://www.pioneer-car.eu

[*] ND-DVR100

English:

Hereby, Pioneer declares that the radio equipment

type [*] is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is

available at the following internet address:

http://www.pioneer-car.eu/compliance

Suomi:

Pioneer vakuuttaa, että radiolaitetyyppi [*] on direk-

tiivin 2014/53/EU mukainen.

EU-vaatimustenmukaisuusvakuutuksen täysimit-

tainen teksti on saatavilla seuraavassa internetosoit-

teessa:http://www.pioneer-car.eu/compliance

Nederlands:

Hierbij verklaar ik, Pioneer, dat het type radioappa-

ratuur [*] conform is met Richtlijn 2014/53/EU.

De volledige tekst van de EU-conformiteitsverklaring

kan worden geraadpleegd op het volgende interne-

tadres:http://www.pioneer-car.eu/compliance

Français:

Le soussigné, Pioneer, déclare que l'équipement

radioélectrique du type [*] est conforme à la direc-

tive 2014/53/UE.

Le texte complet de la déclaration UE de conformité

est disponible à l'adresse internet suivante:

http://www.pioneer-car.eu/compliance

Svenska:

Härmed försäkrar Pioneer att denna typ av radiout-

rustning [*] överensstämmer med direktiv 2014/53/EU.

Den fullständiga texten till EU-försäkran om över-

ensstämmelse finns på följande webbadress:

http://www.pioneer-car.eu/compliance

Dansk:

Hermed erklærer Pioneer, at radioudstyrstypen [*] er

i overensstemmelse med direktiv 2014/53/EU.

EU-overensstemmelseserklæringens fulde tekst kan

findes på følgende internetadresse:

http://www.pioneer-car.eu/compliance

Deutsch:

Hiermit erklärt Pioneer, dass der Funkanlagentyp

[Bezeichnung] der Richtlinie 2014/53/EU entspricht.

Der vollständige Text der EU-Konformitätserklärung

ist unter der folgenden Internetadresse verfüg-

bar:http://www.pioneer-car.eu/compliance

Ελληνικά:

Με την παρούσα ο/η Pioneer, δηλώνει ότι ο

ραδιοεξοπλισμός [*] πληροί την οδηγία 2014/53/ΕΕ.

Το πλήρες κείμενο της δήλωσης συμμόρφωσης

ΕΕ διατίθεται στην ακόλουθη ιστοσελίδα στο

διαδίκτυο:http://www.pioneer-car.eu/compliance

Italiano:

Il fabbricante, Pioneer, dichiara che il tipo di apparec-

chiatura radio [*] è conforme alla direttiva 2014/53/UE.

Il testo completo della dichiarazione di conformità

UE è disponibile al seguente indirizzo Internet:

http://www.pioneer-car.eu/compliance

Español:

Por la presente, Pioneer declara que el tipo de equi-

po radioeléctrico [*] es conforme con la Directiva

2014/53/UE.

El texto completo de la declaración UE de conformi-

dad está disponible en la dirección Internet sigui-

ente:http://www.pioneer-car.eu/compliance

Português:

O(a) abaixo assinado(a) Pioneer declara que o

presente tipo de equipamento de rádio [*] está em

conformidade com a Diretiva 2014/53/UE.

O texto integral da declaração de conformidade está

disponível no seguinte endereço de Internet:

http://www.pioneer-car.eu/compliance

Čeština:

Tímto Pioneer prohlašuje, že typ rádiového zařízení

[*] je v souladu se směrnicí 2014/53/EU.

Úplné znění EU prohlášení o shodě je k dispozici na

této internetové adrese:

http://www.pioneer-car.eu/compliance

Eesti:

Käesolevaga deklareerib Pioneer, et käesolev

raadioseadme tüüp [*] vastab direktiivi 2014/53/EL

nõuetele.

ELi vastavusdeklaratsiooni täielik tekst on kättesaa-

dav järgmisel internetiaadressil:

http://www.pioneer-car.eu/compliance

Magyar:

Pioneer igazolja, hogy a [*] típusú rádióberendezés

megfelel a 2014/53/EU irányelvnek.

Az EU-megfelelőségi nyilatkozat teljes szövege

elérhető a következő internetes címen:

http://www.pioneer-car.eu/compliance

Latviešu valoda:

Ar šo Pioneer deklarē, ka radioiekārta [*] atbilst Direk-

tīvai 2014/53/ES.

Pilns ES atbilstības deklarācijas teksts ir pieejams

šādā interneta vietnē:

http://www.pioneer-car.eu/compliance

Lietuvių kalba:

Aš, Pioneer, patvirtinu, kad radijo įrenginių tipas [*]

atitinka Direktyvą 2014/53/ES.

Visas ES atitikties deklaracijos tekstas prieinamas

šiuo interneto adresu:

http://www.pioneer-car.eu/compliance

Malti:

B'dan, Pioneer, niddikjara li dan it-tip ta' tagħmir

tar-radju [*] huwa konformi mad-Direttiva 2014/53/UE.

It-test kollu tad-dikjarazzjoni ta' konformità tal-UE

huwa disponibbli f'dan l-indirizz tal-Internet li ġe-

j:http://www.pioneer-car.eu/compliance

Slovenčina

Pioneer týmto vyhlasuje, že rádiové zariadenie typu

[*] je v súlade so smernicou 2014/53/EÚ.

Úplné EÚ vyhlásenie o zhode je k dispozícii na tejto

internetovej adrese:

http://www.pioneer-car.eu/compliance

Slovenščina:

Pioneer potrjuje, da je tip radijske opreme [*] sklad-

en z Direktivo 2014/53/EU.

Celotno besedilo izjave EU o skladnosti je na voljo

na naslednjem spletnem naslovu:

http://www.pioneer-car.eu/compliance

Română:

Prin prezenta, Pioneer declară că tipul de echipa-

mente radio [*] este în conformitate cu Directiva

2014/53/UE.

Textul integral al declarației UE de conformitate este

disponibil la următoarea adresă internet:

http://www.pioneer-car.eu/compliance

Български:

С настоящото Pioneer декларира, че този

тип радиосъоръжение [*] е в съответствие с

Директива 2014/53/ЕС.

Цялостният текст на ЕС декларацията за

съответствие може да се намери на следния

интернет адрес:

http://www.pioneer-car.eu/compliance

Polski:

Pioneer niniejszym oświadcza, że typ urządzenia

radiowego [*] jest zgodny z dyrektywą 2014/53/UE.

Pełny tekst deklaracji zgodności UE jest dostępny

pod następującym adresem internetowym:

http://www.pioneer-car.eu/compliance

Norsk:

Herved Pioneer erklærer at radioutstyr type [*] er i

samsvar med direktiv 2014/53 / EU.

Den fullstendige teksten i EU-samsvarserklæringen

er tilgjengelig på følgende internettadresse :

http://www.pioneer-car.eu/compliance

Íslenska:

Hér með Pioneer lýsir yfir að tegund þráðlausan

búnað [*] er í samræmi við tilskipun 2014/53/ESB.

The fullur texti af ESB-samræmisyfirlýsingu er í boði

á eftirfarandi veffangi:

http://www.pioneer-car.eu/compliance

Hrvatski:

Pioneer ovime izjavljuje da je radijska oprema tipa

[*] u skladu s Direktivom 2014/53/EU.

Cjeloviti tekst EU izjave o sukladnosti dostupan je

na sljedećoj internetskoj adresi:

http://www.pioneer-car.eu/compliance

Türk:

Burada. Pioneer radyo ekipmani turunun [*] 2014/53/

EU direktiflerine uyumlu oldugunu beyan eder.

Avrupa uyumluluk beyaninin tam metni belirtilen

internet sitesinde mevcuttur :

http://www.pioneer-car.eu/compliance

PIONEER CORPORATION

28-8, Honkomagome 2-chome, Bunkyo-ku,

Tokyo 113-0021, Japan

PIONEER ELECTRONICS (USA) INC.

P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.

TEL: (800) 421-1404

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/

Belgique

TEL: (0) 3/570.05.11

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

2 Jalan Kilang Barat, #07-01, Singapore 159346

TEL: 65-6378-7888

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

5 Arco Lane, Heatherton, Victoria, 3202, Australia

TEL: (03) 9586-6300

PIONEER ELECTRONICS DE MÉXICO S.A. DE C.V.

Blvd. Manuel Ávila Camacho 138, 10 piso

Col.Lomas de Chapultepec, México, D.F. 11000

Tel: 52-55-9178-4270, Fax: 52-55-5202-3714

先鋒股份有限公司

台北市內湖區瑞光路407號8樓

電話 : 886-(0)2-2657-3588

先鋒電子（香港）有限公司

香港九龍長沙灣道909號5樓

電話 : 852-2848-6488

Precaution

Certain country and state laws may prohibit or restrict

the placement and use of this product in your vehicle.

Please comply with all applicable laws and regulations

regarding the use, installation and operation of this

product.It is the user’s responsibility in compliance

with all applicable laws and ordinance.

Information for users on collection and dis-

posal of old equipmentand used batteries

(Symbol for

equipment)

(Symbol examples for batteries)

These symbols on the products, packaging, and/or

accompanying documents mean that used electri-

cal and electronic products and batteries should

not be mixed with general household waste.

For proper treatment, recovery and recycling of

old products and used batteries, please take them

to applicable collection points in accordance with

your national legislation.

By disposing of these products and batteries correctly,

you will help to save valuable resources and prevent

any potential negative effects on human health and the

environment which could otherwise arise from inappro-

priate waste handling.

For more information about collection and recycling of

old products and batteries, please contact your local

municipality, your waste disposal service or the point of

sale where you purchased the items

These symbols are only valid in the European

Union.

For countries outside the European Union:

If you wish to discard these items, please contact

your local authorities or dealer and ask for the correct

method of disposal.

CAUTION

⨋

The graphical symbol placed on the product

means direct current.

⨋

Information to User - Alteration or modifications

carried out without appropriate authorization may

invalidate the user’s right to operate the equipment.

Information to User

⨋

FEDERAL COMMUNICATIONS COMMISSION DEC-

LARATION OF CONFORMITY

Product Name:DASH CAMERA

Model Number:ND-DVR100

Responsible Party Name: PIONEER ELECTRONICS

(USA), INC. SERVICE SUPPORT DIVISION

Address: 1925 E. DOMINGUEZ ST. LONG BEACH, CA

90810-1003, U.S.A.

Phone: 1-800-421-1404

URL: http://www.pioneerelectronics.com

⨋

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

⨋

NOTE: This equipment has been tested and found

to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However,

there is no guarantee that interference will not occur

in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to

try to correct the interference by one or more of the

following measures:

—

Reorient or relocate the receiving antenna.

—

Increase the separation between the equipment

and receiver.

—

Connect the equipment into an outlet on a circuit dif-

ferent from that to which the receiver is connected.

—

Consult the dealer or an experienced radio/TV

technician for help.

The Safety of Your Ears is in Your Hands

Get the most out of your equipment by playing it at a

safe level—a level that lets the sound come through

clearly without annoying blaring or distortion and, most

importantly, without affecting your sensitive hearing.

Sound can be deceiving. Over time, your hearing “com-

fort level” adapts to higher volumes of sound, so what

sounds “normal” can actually be loud and harmful to

your hearing. Guard against this by setting your equip-

ment at a safe level BEFORE your hearing adapts.

ESTABLISH A SAFE LEVEL:

⨋

Set your volume control at a low setting.

⨋

Slowly increase the sound until you can hear it com-

fortably and clearly, without distortion.

⨋

Once you have established a comfortable sound level,

set the dial and leave it there.

BE SURE TO OBSERVE THE FOLLOWING

GUIDELINES:

⨋

Do not turn up the volume so high that you can’t hear

what’s around you.

⨋

Use caution or temporarily discontinue use in poten-

tially hazardous situations.

CYR1207-B.indd 1-4 2018/02/06 15:27:48

CYR1207-B < 5 > CYR1207-B < 6 > CYR1207-B < 7 > CYR1207-B < 8 >

⨋

The storage areas on the microSD card are split

into the four areas shown in the following diagram

according to the type of recording.

Event video file storage area

Continuous video file storage area

Parking mode video file storage area

Photo file storage area

You can change the percentage of space used by

these storage areas.

→

“System” - “SD card partition”

⨋

Note that files be overwritten when there is insufficient

free space in the file storage areas. We recommend

that you back up any important files you want to keep.

→

“Using this product” - “Backing Up Recorded Files”

⨋

You can view video files on your PC. However, the

video may stutter or stop depending on the perfor-

mance of the PC.

⨋

The power terminal will be extremely hot immediately

after using the cigarette lighter. The tip of the Ciga-

rette Lighter Power Cable may melt or short circuit if

it is plugged in while hot. Wait for the terminal to cool

before plugging in the Cigarette Lighter Power Cable.

⨋

Do not touch the lens with your hands. Wipe the lens

off with a soft cloth if you touch it.

Precautions When Handling the

microSD Card

CAUTION

⨋

Keep the microSD card out of the reach of small chil-

dren to prevent them from accidentally swallowing it.

⨋

To prevent data loss and damage to the microSD

card, never remove it from this product while data is

being transferred.

⨋

If data loss or corruption occurs on the microSD card

for any reason, it is usually not possible to recover the

data. Pioneer accepts no liability for damages, costs

or expenses arising from data loss or corruption.

⨋

Never insert or eject an microSD card while driving.

⨋

This product supports microSDHC cards (8 GB to 32 GB,

Class 10). Not all microSDHC cards are guaranteed to work

with this product.

⨋

Format the microSD card before using it. Do not use

a microSD card that contains other data, such as

that from a PC.

⨋

Do not eject the microSD card when it is being ac-

cessed.

The file or card may be corrupted.

⨋

Even if the microSD card is used normally, you may

no longer be able to write data to the card or erase

data from the card normally.

⨋

The service life of the microSD card is not covered

under the warranty.

⨋

The microSD card is a consumable part. We recom-

mend that you regularly replace the microSD card

with a new card. If you use the microSD card for a

long period of time, this product may no longer be

able to save data to the card correctly due to bad

sectors, or an error may occur and the card will no

longer be usable.

⨋

On rare occasions, a microSD card that is recognized by

your computer may not be recognized by this product.

In this case, depending on the problem with the mi-

croSD card, this product may be able to recognize the

card by formatting it with this product format feature

→

“System” - “Format SD card”

However, all files,

including protected files, saved to the microSD card will

be erased when it is formatted. Always back up the files

on the microSD card before formatting it.

⨋

Pioneer Corporation does not make any assurances that

microSD card problems will be repaired by formatting

the card. Pioneer Corporation bears no responsibility for

files that are erased from the microSD card or dam-

age that occurs from formatting the card. Format the

microSD card according to your own judgment and at

your own responsibility.

When Replacing the Fuse

Check if the fuse has blown when the power will not turn on or the battery cannot be charged even though the

included Cigarette Lighter Power Cable is connected.

Connect to

vehicle

cigarettelighter

socket

Fuse (2 A/250 V)

Remove this part.

Remove carefully.

These parts are easily lost.

When Replacing the Fuse

Twist counterclockwise to remove.

Note

When the fuse has blown, replace the fuse with a new

cartridge fuse (5.2 mm diameter/20 mm long), and

firmly tighten the tip of the plug. Always replace the

fuse with a fuse of the specified capacity (2 A/250 V).

How to read this Manual

Notation Meaning

These symbols are used to draw your attention to items you should be aware of when

using this product and items you should be aware of to maintain its performance.

Note /Notes

Notes provide useful tips and extra information about product features.

[○○]

Square brackets are used to indicate selectable items displayed on the screen.

→

“

○○○○

”

Quotation marks are used to indicate references and settings.

⨋

The illustrations and example screens used in this

manual may differ from the actual product.

⨋

The actual screens of the product may be changed

without prior notification for the purpose of improve-

ments to product performance and features.

⨋

In this manual, the microSDHC memory card is

referred to as “the microSD card” for convenience.

Usage Precautions

Precautions When Handling this

product

⨋

The driver may manually set the device to save video

to assist in the monitoring of driver performance.

⨋

There are limits to the scope of video that can be

recorded with this product (

→

“Specifications”

). First

check the video that will be recorded before using this

product.

⨋

Be careful not to infringe on the privacy of any subject

in video recorded with this product when using said

video. You are fully responsible for the use of said video.

Video recorded with this product may include personal

information, such as license plate numbers.

⨋

When this product is not fully charged immediately

after purchase and the power to this product is

stopped (the engine is turned off and the Cigarette

Lighter Power Cable is unplugged), the recording time

may be shorter or this product may not be able to

record video.

⨋

The internal battery is a consumable part. The operat-

ing time will slowly decrease as the battery is repeat-

edly charged. Contact Pioneer support if you feel that

the operating time has become too short.

⨋

If this product is used near another device that uses

GPS, such as a car navigation system, that device may

temporarily be unable to receive radio waves from GPS

satellites due to radio interference. There may also

be a negative impact on the functions of surrounding

devices.

⨋

Pioneer does not offer a data recovery service for

corrupted or deleted files.

Check the Accessories

This product × 1 Installation Bracket (attached to

this product) × 1

Cigarette Lighter

Power Cable (3.5 m / 11 ft. 6 in.) × 1

Cleaning Cloth × 1 Owner’s Manual

microSDHC Card (8 GB) × 1

SD Conversion Adapter × 1

Before Installing the Product

CAUTION

⨋

First check with the vehicle manufacturer for precautions related to the installation work when installing the prod-

uct in a vehicle equipped with airbags. Otherwise there is a risk of airbag malfunction.

⨋

Always use the included parts as specified. There is a risk of product failure if other parts are used.

⨋

Install this product in a location where it will not hinder vehicle equipment and the ability to drive the vehicle.

Installation Tips

Before Installing and Securing the Product

⨋

First, temporarily connect this product and confirm that it operates correctly, and then install it. If the product

does not operate correctly, check again if there is a mistake in the connection.

Before Applying Double-sided Tape

⨋

Clean the location where the double-sided tape will be applied.

The double-sided tape cannot be reapplied once applied and peeled off because its adhesive power will weaken.

Temporarily attach this product and carefully review the routing of the cable before applying the double-sided tape.

Installation Precautions

⨋

This product is for installation to the front windshield only. Do not install it anywhere else inside or outside of the

vehicle.

⨋

Always install this product to the specified position of the front windshield and within the specified dimensions.

⨋

Depending on the vehicle, it may not be possible to install this product to the specified position and within the

specified dimensions. Consult with your dealer or the nearest authorized Pioneer Service Station for details.

⨋

Do not cover this product or get the lens dirty.

⨋

Do not place reflective objects near the lens.

⨋

Take care when handling this product so that it does not drop and you do not touch the lens.

⨋

Recording quality may be affected if the front windshield of the vehicle is coated or has been specially treated.

⨋

This product may not be able to receive GPS signals if the front windshield of the vehicle has been specially

treated.

⨋

Check the GPS reception status indicator displayed on the screen of this product. If a GPS signal cannot be

received, this product cannot be installed in this vehicle.

→ “Using this product” - “Status Display”

⨋

Choose a working location free from dust and debris in the air.

⨋

When the temperature is low or there is condensation on the glass, turn on the heater and defroster to warm up

the window in order to prevent poor adhesion of the double-sided tape.

Disclaimer

⨋

Given the large number of variables and conditions

that can be involved in an accident, Pioneer cannot

guarantee that every accident or occurrence will

trigger the recording feature in this device.

⨋

This product features may not operate properly due to

the effects of settings, how this product is installed,

the condition of the microSD card, and driving condi-

tions (including the road conditions).

⨋

If brightly colored objects are placed on the dash-

board, they may be reflected in the front windshield

and the camera image. Do not place brightly colored

objects on the dashboard.

⨋

This product is not guaranteed to be effective as

evidence in an accident.

⨋

This product is not guaranteed to save video in all

situations.

⨋

You may not be able to recognize the conditions in the

front of the vehicle in recorded video, depending on the

ambient conditions, such as the weather and time.

⨋

LED traffic signals may appear as flashing or flicker-

ing when recorded with this product. The color may

also not be correctly identifiable. Pioneer Corpora-

tion accepts no responsibility whatsoever for these

phenomena.

⨋

This product saves video before and after an accident

occurs by detecting the impact (acceleration) with the

G-sensor (accelerometer). However, this product is not

guaranteed to save video in all situations

⨋

Pioneer Corporation accepts no responsibility whatsoever

for product failures or damage that occur due to the

microSD card wearing out.

⨋

Pioneer Corporation does not make any assurances that

microSD card problems will be repaired by formatting

the card. Pioneer Corporation bears no responsibility for

files that are erased from the microSD card or damage

that occurs from formatting the card. Format the mi-

croSD card according to your own judgment and at your

own responsibility.

Station. Using this product in this condition may

result in permanent damage to the system.

⨋

Do not disassemble or modify this product, as there

are high-voltage components inside which may cause

an electric shock. Be sure to consult your dealer or

the nearest authorized Pioneer Service Station for

internal inspection, adjustments or repairs.

Before using this product, be sure to read and fully

understand the following safety information:

⨋

Do not operate this product if doing so will divert your

attention in any way from the safe operation of your

vehicle. Always observe safe driving rules and follow

all existing traffic regulations. If you experience diffi-

culty in operating this product or reading the display,

park your vehicle in a safe location and apply the park-

ing brake before making the necessary adjustments.

⨋

Never set the volume of this product so high that you

cannot hear outside traffic and emergency vehicles.

⨋

Keep this manual handy as a reference for operating

procedures and safety information.

⨋

Certain functions (such as viewing of screen and cer-

tain button operations) offered by this product could

be dangerous (possibly resulting in serious injury or

death) and/or unlawful if used while driving. Screen

display and button operation are disabled for this

product while the vehicle is moving.

To ensure safe driving

WARNING

⨋

In some countries the viewing of video image on a dis-

play inside a vehicle even by persons other than the

driver may be illegal. Where such regulations apply,

they must be obeyed.

Precautions before connecting the system

CAUTION

⨋

Firmly install this product so it does not fall off the

window. If this product is not firmly installed, it may

fall off the window while driving and cause an acci-

dent. Periodically inspect this product.

⨋

Secure all wiring with cable clamps or electrical tape.

Do not allow any bare wiring to remain exposed.

⨋

It is extremely dangerous to allow cables to become

wound around the steering column or gearstick. Be

sure to install this product, its cables, and wiring away

in such so that they will not obstruct or hinder driving.

⨋

Make sure that the cables and wires will not interfere

with or become caught in any of the vehicle’s mov-

ing parts, especially the steering wheel, gearstick,

handbrake, sliding seat tracks, doors, or any of the

vehicle’s controls.

⨋

Do not route wires where they will be exposed to high

temperatures. If the insulation heats up, wires may

become damaged, resulting in a short circuit or mal-

function and permanent damage to the product.

⨋

Do not shorten any cables. If you do, the protection

circuit (fuse holder, fuse resistor or filter, etc.) may fail

to work properly.

⨋

Never feed power to other electronic products by

cutting the insulation of the power supply cable of this

product and tapping into the cable. The current capac-

ity of the cable will be exceeded, causing overheating.

To prevent damage

WARNING

⨋

When replacing the fuse, be sure to only use a fuse of

the rating prescribed on this product.

Precautions before installation

CAUTION

Never install this product in places where, or in a

manner that:

⨋

Could injure the driver or passengers if the vehicle

stops suddenly.

⨋

May interfere with the driver’s operation of the vehi-

cle, such as on the floor in front of the driver’s seat, or

close to the steering wheel or gearstick.

⨋

To ensure proper installation, be sure to use the

supplied parts in the manner specified. If any parts

are not supplied with this product, use compatible

parts in the manner specified after you have the parts’

compatibility checked by your dealer. If parts other

than supplied or compatible ones are used, they may

damage internal parts of this product or they may

work loose and the product may become detached.

⨋

Do not install this product where it may

(i) obstruct the driver’s vision,

(ii) impair the performance of any of the vehicle’s op-

erating systems or safety features, including airbags,

hazard lamp buttons or

(

iii) impair the driver’s ability to safely operate the vehicle.

⨋

Never install this product in front of or next to the

place in the dashboard, door, or pillar from which one

of your vehicle’s airbags would deploy. Please refer

to your vehicle’s owner’s manual for reference to the

deployment area of the frontal airbags.

⨋

Consult with your nearest dealer if installation requires

drilling holes or other modifications of the vehicle.

⨋

Before making a final installation of this product, tem-

porarily connect the wiring to confirm that the con-

nections are correct and the system works properly.

⨋

Do not install this product in places subject to high

temperatures or humidity, such as:

—

Places close to a heater, vent or air conditioner.

—

Places that may be exposed to rain, such as close to

the door or on the vehicle’s floor.

Precautions for cigarette lighter plug

WARNING

⨋

When using a power supply in the vehicle, use the

dedicated cigarette lighter plug.

Using a plug other than the specified plug may result

in fire, electric shock, or product failure.

⨋

Unplug the cigarette plug after using the product and

when the product will not be used for a long period of time.

Depending on the vehicle, the cigarette socket may

not be turned off even when the engine is turned off.

For this reason, there is a risk of fire or a dead battery.

⨋

Fully insert the cigarette lighter plug. Poor contact may

occur due to vibrations while driving, resulting in an ex-

tremely dangerous situation where the unit overheats.

⨋

Regularly inspect and clean the cigarette lighter sock-

et. Foreign material inside the cigarette lighter socket,

such as ashes, may cause heat generation due to

poor contact, resulting in fire or electric shock.

CYR1207-B.indd 5-8 2018/02/06 15:27:51

CYR1207-B < 9 > CYR1207-B < 10 > CYR1207-B < 11 > CYR1207-B < 12 >

Installation

Specified Installation Position

⨋

Install this product in a vehicle and at a position that satisfies all of the following conditions.

—

A position where the lens of this product is in the area swept by the windshield wipers.

—

A position where the lens of this product is not affected by the sun visor and frit band.

—

A position where this product faces in the horizontal direction to the front and side to side.

—

A position where the Cigarette Lighter Power Cable can easily reach the socket.

⨋

This product must be slid to the left to remove it from the bracket after installation to the front windshield. If this

product is installed too close to the rear view mirror when it is installed on the right side of the rear view mirror in

a left-hand drive vehicle, you will not be able to remove it from the bracket.

Horizontal Direction

This product

Front Windshield

Ground

Installation Direction

This product

Horizontal DirectionHorizontal Direction

Installation Angle

Forward Direction

of Vehicle

Front Wind

shield

Front Wind

shield

Allowable Installation Angle: 5° to 80°

(With Lens Horizontal)

Install this product in a location where it will

not interfere with the driver’s field of view,

such as behind the rearview

mirror.

Drive Recorder UnitThis product

Airbag

Rearview Mirror

A Pillar

Within 20 % of Height

Range of Windshield Wipers

A Pillar

This product

IMPORTANT

Always install this product in the specified installation position to ensure a safe field of view while driving and to

achieve full performance from the product.

1 Clean the installation area of

dirt and oils using the included

cleaning cloth.

2 Install this product.

Peel off the sticker on the Installation Bracket

(①) and attach this product to the front

windshield.

Firmly push the top of the product and both

sides of the LCD (②). Never touch the surface

of the LCD.

Installation Bracket

Use extreme care as the double-sided tape

on the Installation Bracket in (①) is extreme-

ly strong, and it will be difficult to reapply the

tape once it has been applied.

3 Route the cable.

Route the Cigarette Lighter Power Cable to the

passenger seat side.

Cigarette

Lighter

Power Cable

The power terminal will be extremely hot

immediately after using the cigarette lighter.

The tip of the Cigarette Lighter Power Cable

may melt or short circuit if it is plugged in

while hot. Wait for the terminal to cool be-

fore plugging in the Cigarette Lighter Power

Cable.

4 Adjust the angle of the lens.

Note

A protective film is applied to the lens when the prod-

uct is purchased. Peel off this film.

Removing this product

The Installation Bracket is attached to this product when the product is purchased. After this product is installed in

the vehicle, remove this product from the Installation Bracket with the following steps.

1 Slide this product to the left as viewed from the LCD of this product.

Slide this product in the opposite direction of the "LOCK

" symbol.

2 Remove this product so that the hooks on the Installation Bracket disengage

from the slots on this product.

Installation Bracket Slots

Installation Bracket Hooks

Reverse the steps to reattach this product. Line up and fit together the hooks on the Installation Bracket with the

slots on this product, then slide this product to the right as viewed from the LCD (the direction indicated by the

“LOCK➡” symbol on the Installation Bracket).

Part Names

(Front)

(Back)

① System Indicator

② Mini USB Terminal (mini-B type)

The Cigarette Lighter Power Cable is connected

to this terminal. You can also connect this

product to your computer with a commercially

available USB cable.

③ Speaker

④ Function Buttons

⑤ Power Button/Function Button

⑥ Microphone

⑦ microSD Card Slot

⑧ Reset Button

Press this button with the tip of a ballpoint pen

to reset this product. (When the product is reset,

the power turns off. To turn the power back on,

press and hold the power button.)

⑨ Installation Bracket Slots

⑩ Lens

⑪ Indicator

The indicator is illuminated when powered.

CYR1207-B.indd 9-12 2018/02/06 15:27:54

CYR1207-B < 13 > CYR1207-B < 14 > CYR1207-B < 15 > CYR1207-B < 16 >

Inserting and Ejecting the microSD Card

Turn off the power to this product when inserting and removing the microSD card.

microSD Card Slot

Inserting the microSD Card

Hold the top edge of the microSD card, position the microSD card so that the label is facing the backside of this

product, and slowly insert it into the microSD card slot until it clicks.

Ejecting the microSD Card

Slowly push in the top edge of the microSD card until it clicks. The lock will be released. Pull out the microSD card.

Playing Files on a PC

You can play the files on the microSD card with your PC by inserting the microSD card ejected from this product into

your PC, using the included SD Conversion Adapter if necessary.

Folder and File Structure

Event

(Event video file)

Parking

(Parking mode video file)

Photo

(Photo file)

Video

(Continuous video file)

EVEN******-******.MP4

EVEN******-******.NMEA

PARK******-******.MP4

PARK******-******.NMEA

IMG******-******.JPG

FILE******-******.MP4

FILE******-******.NMEA

DEVICE.XML

(System file)

Folder File

SD Conversion Adapter

(included)

microSD Card

Notes

⨋

The file name is automatically assigned a name using the year, month, day, hours, minutes, and seconds.

⨋

Files with the extension “.NMEA” are administration files.

⨋

Files can be played on your PC by connecting this product and PC with a commercially available USB cable.

⨋

This product does not support USB 3.0.

Using this product

Before using this product, first stop the vehicle in a safe location and apply the parking brake.

This product Power

This product starts when the vehicle’s engine is turned on (ACC ON), and it automatically starts recording. (Contin-

uous recording)

The recorded video is saved to the microSD card as one file of the set increment of time, and when the microSD

card runs out of free space, the files are overwritten starting from the oldest file.

CAUTION

⨋

This product may not start when the engine is started if the internal battery is discharged or insufficiently

charged.

Start this product with the following methods when it does not start.

—

Press the power button on this product.

—

Charge this product and let it sit for about three minutes. Then unplug the plug of the Cigarette Lighter

Power Cable from the cigarette power socket and plug it back in.

Notes

Continuous recording will stop under the following circumstances.

—

When the settings menu is displayed – During event recording

—

When the power supply is stopped – When parking mode has started

■ Manually Turning the Power On and Off

To manually turn this product power on and off, press and hold the

power button for two or more seconds.

System Indicator Display

The operating status of this product is displayed with the system indicator.

System Indicator Charging Continuous Recording

Event/Parking Mode

Recording

Illuminated green

○

Illuminated red

○

Illuminated amber

○

Check this product settings for the parking mode settings. →

“This product Settings”

Function Buttons

The functions of the function buttons are indicated by the icons displayed at the bottom of the screen.

The functions of the buttons will depend on the displayed screen.

Notes

The following restrictions will occur when the product detects that the vehicle is moving faster than

approx. 15 km/h. (Only when a GPS signal can be received.)

⨋

will be hidden.

⨋

The product switches to the recording state while the settings menu screen is displayed.

■ Recording

2 3 4

① Power off

② Display settings menu

③ Take photo

④ Record event

Status Display

The status display shows the operating status of this product.

18:16:23

1 32

① Recording indicator

This icon flashes during recording.

② Current time

The time displayed here is recorded as the event

recording time.

→ “System”-“Date/Time”

③ GPS reception status

The bars are green when receiving GPS signals.

GPS signals cannot be received when the bars

are white and a red × is displayed.

④ Recording screen

Event Recording

■ Automatic Recording by Detecting

Impacts (Event Recording)

The continuous video file when an impact was detected

by this product, such as an impact with another vehicle,

is saved to the “Event” folder as an event video file. The

number of event video files and the recording time will

depend on when the impact was detected.

⨋

When the impact was detected at the beginning

of the file

When the impact was detected within 10 seconds

of the start of the continuous video file, the current

file where the impact was detected and the previous

file (continuous video file 1 and 2 in the following

diagram) are saved as the event video file.

Continuous video file 2Continuous video file 1

Impact detected

Continuous video file 2

Start recording

Within 0 to 10 seconds

⨋

When the impact was detected at the end of the file

When the impact was detected in the 9 seconds

before the end of the continuous video file, the file

will be extended by 10 seconds of recording time

and saved as the event video file. If an impact was

detected during the extended period, a subsequent

video file will be added and saved as an event video

file. Video files will be repeatedly added while the

impact continues.

Continuous video

file 1

Impact

detected

Start recording

9 secondsbefore

end of video

Extended by

10 seconds

Continuous video

file 2

⨋

When the impact was detected at a time other

than the beginning or end of the file

Only the continuous video file when the impact was

detected is saved as the event video file.

■ Manual Recording (Manual Event

Recording)

Switch to event recording by pressing the

button

during continuous recording. The recorded video is

saved to the

“Event” folder as an event video file.

This

product returns to continuous recording when event

recording ends.

Notes

⨋

Stop event recording by pressing the

button

during event recording.

⨋

The recording time can be set with

“Video Clip

Length”

→

“Video Recording” - “Video Clip Length”

⨋

You can also adjust the sensitivity for detecting

impacts.

→ “Video Recording” - “G-Sensor Sensitivity”

Parking Mode

Parking mode operates for a maximum of approximately

50 minutes after the power supplied to this product

stops (the engine is turned off or the cigarette power

cable is unplugged). If this product detects vibration

or the movement of people/vehicles due to changes

in the image, 20 seconds of video is recorded after the

detected event.

Notes

⨋

To use parking mode, under “Parking Mode”, set

“Parking Mode” to ON.

→ “Parking Mode” - “Parking Mode”

⨋

You can adjust the sensitivity for detecting vibration.

→ “Parking Mode” - “G-Sensor Sensitivity”

⨋

You can adjust the sensitivity for detecting the

movement of people and vehicles.

→

“Parking Mode” - “Motion Detection”

■ Settings menu

6 7 8

⑤ Back

⑥ Next settings screen

⑦ Previous settings screen

⑧ Confirm

Notes

The following restrictions will occur when the product detects that the vehicle is moving faster than

approx. 15 km/h. (Only when a GPS signal can be received.)

⨋

If the monitor display is set to [Always On], the recording screen and

will be hidden.

⨋

When the screen is off, the screen can be displayed by pressing any button.

CYR1207-B.indd 13-16 2018/02/06 15:27:58

CYR1207-B < 17 > CYR1207-B < 18 > CYR1207-B < 19 > CYR1207-B < 20 >

Using this product

Before using this product, first stop the vehicle in a safe location and apply the parking brake.

Taking Photos

You can take a photo by pressing the button

during continuous recording.

Backing Up Recorded Files

When the free space of the file storage areas is low,

recording proceeds by first deleting old files.

We recommend that you back up any important files you

want to keep with the following procedure.

Note

Prepare a spare microSD card in advance.

1 Replace the microSD card.

After recording a video or taking photos that you

want to back up, first stop the vehicle is a safe

location. Then turn off this product power, eject

the microSD card, and replace it with a spare

microSD card.

2 Copy or move the files to a PC.

Insert the microSD card into a PC, using the SD

card adapter if necessary.

Copy or move the videos and photo files to back

up to a suitable location on the PC.

Note

For the folder and file structure

→ “Playing Files on a PC”

Playing Recorded Files

You can play recorded video files and view photo files.

1 Press the button to open the

settings menu.

2 Press the

/ function

buttons, select [Playback], and

then press

Playback

Sound Recording

Parking Mode

Video Recording

1/2

3 Press the / function

buttons, select the folder, and then

press

Playback

Video

Event

Parking

Photo

You can select the following folders.

• Video • Event

• Parking • Photo

▼

The thumbnails of the selected folder will be displayed.

4 Press the / function

buttons, select the file to play, and

then press

Video

1/6

▼

The selected file will play.

Note

You can perform the following operations by pressing

the function buttons during playback.

⨋

Press

to return to the thumbnails.

⨋

Press / during video playback to

play the previous/next movie. Press and hold the

buttons to rewind or fast forward the video.

⨋

Press during video playback and a menu

will be displayed that allows you to perform the

following operations.

—

Pause:

Pauses the video. Press again to start playback.

—

Move to Event:

Moves the current video file to the event folder.

—

Delete:

Deletes the current video file.

⨋

Press / while viewing a photo to dis-

play the previous/next photo. Press

to delete

the current photo.

These settings configure this product. You can reset the settings to the default when the product is purchased.

You can also format the microSD card and check this product version information.

Note that continuous recording will stop while the setting screens are displayed.

1 Press the button to open the

settings menu.

2 Press the

/ function

buttons, select the setting, and

then press

Video Recording

Video Clip Length

WDR

G-Sensor Sensitivity

1/2

3 Press the

/ function

buttons, select the value for the

setting, and then press

Video Clip Length

20 sec

1 min

3 min

▼

To complete the settings, press the

button until returning to the recording screen.

■ Configurable Features

Bold: Default setting value when the product is purchased.

Setting Details Values

Playback

Select [Video], [Event], [Parking], or [Photo] to play and delete recorded

videos and photo files. →

“Using this product” - “Playing Recorded Files”

Sound Recording

Sets whether or not to record sound around

this product when recording video files.

[ON]/[OFF]

Parking Mode

Parking Mode Sets parking mode. [ON]/[OFF]

Detection Method

Sets the combination of sensors to use for

detection.

[Both Motion & G-sensor]/

[Only G-sensor]/[Only Motion]

Auto Entry

When the product is powered but no vibrations

to the vehicle are detected for approximately

five minutes, the product will automatically

start parking mode. You can set the sensitivity

of the sensor that starts parking mode.

—

[Easy]: Parking mode starts easily.

—

[Difficult]: Parking mode does not start easily.

—

[OFF]: Turns off Auto Entry.

For low-vibration vehicles, the product may

start parking mode while driving, even when

the sensitivity is set to [Difficult]. In this case,

set Auto Entry to [OFF].

[Easy]/[Medium]/[Difficult]/

[OFF]

Motion Detection

Sets the sensitivity for detecting the

movement of people and vehicles through

changes in the image.

[Low]/[Medium]/[High]

G-Sensor

Sensitivity

Sets the sensitivity for detecting that the

vehicle has been exposed to vibrations.

[Low]/[Medium]/[High]

This product Settings

Before using this product, first stop the vehicle in a safe location and apply the parking brake.

Setting Details Values

Video Recording

Video Clip Length

Sets the recording time for one

continuous recording video file.*

[20 sec]/[1 min]/[3 min]

WDR(Wide

Dynamic Range)

Sets use of the feature that automatically

adjusts the image in situations where

there is a large difference between light

and dark.

[ON]/[OFF]

EV(Exposure

Value)

Sets the exposure level for adjusting

image brightness.

[－1]

～

[0]

～

[＋1]

G-Sensor

Sensitivity

Sets the sensitivity for detecting vibration

and impact during continuous recording.

[1]～[4]～[6]

Speed Stamp

Sets whether or not to display the travel

speed in the video file.

[ON]/[OFF]

Text Stamp

Sets a maximum of 12 characters that will be displayed at the bottom

right of the image when playing a video file.

System

Date/Time

Select [Use GPS time] or [Manual] and

set the date and time. When [Use GPS

time] is selected, the date and time will

be automatically set using Greenwich

Mean Time (GMT) received as a signal

from the GPS satellites. When using [Use

GPS time], set the time zone ([GMT-12:00]

to [GMT+12:00]) and Daylight Saving

Time for the region where the product will

be used. (The default setting when the

product is purchased is [GMT-06:00].)

[Use GPS time]/[

Manual

]

System Sound

Sets whether or not to output alarm

sounds and menu beeps.

[ON]/[OFF]

Volume Sets the volume when playing video files.

[1]～[3]～[5]

LCD Standby

Sets the screen to be [Always On] or the

time to display the screen.

[Always On]/

[10 sec screen off]/

[1 min screen off]/

[3 min screen off]

Language

Sets the language used to display the

screen.

[English]/[繁體中文]/[简体中

文]/[Русский]/[Nederlands]/

[Français]/[Deutsch]/[Español

Mexicano]/[ไทย]/[Bahasa

Indonesia]

Distance Unit

Sets the unit of distance/speed.

[Meter]/[Mile]

SD card partition

Sets the percentage of memory to use for

saving continuous video, events, parking

mode video, and photos.

→

“Guide to Recording Time and No. of

Photos”

[79% 10% 10% 1%]/

[59% 30% 10% 1%]

[Last storage 20 clips 10 clips

400 pics]

Restore to

Defaults

Restores all settings to the defaults when the product is purchased.

Version Allows you to check the version information of this product firmware.

Format SD card Formats the microSD card. All files on the card will be deleted.

*1 Approx. 20 seconds of video is recorded for parking mode videos. If vibrations or the movements of people

and vehicles are detected during recording, the recording time will be extended approx. 20 seconds at a time

up to a maximum of approx. 1 minute.

If the microSD card experiences a problem, the “SD card error” screen will be displayed.

*3 In California in the United States of America, set this to 20 seconds to comply with state laws.

CYR1207-B.indd 17-20 2018/02/06 15:28:06

CYR1207-B < 21 > CYR1207-B < 22 > CYR1207-B < 23 > CYR1207-B < 24 >

Troubleshooting

Check the following information before sending the product in for repairs.

Symptom Cause Action

An error occurred during the

display and operation of the this

product .

The microcomputer in this

product is malfunctioning.

Press the reset button.

A file that should have been

saved cannot be found.

If there is insufficient space in

the storage areas of the microSD

card, the files will be overwritten

in order from the oldest files.

We recommend that you back up any

important files you want to keep.

→

“Using this product”- “Backing Up Recorded

Files”

The product makes parking mode

files when I get in and out of the

vehicle.

The vibration when people get

in and out of the vehicle and the

movement of people are being

detected.

Adjust the combination of sensors and their

sensitivity.

→

“Parking Mode” - “Detection Method”,

“G-Sensor Sensitivity”, “Motion Detection”

There are many videos where

nothing happens in the files

recorded while parked.

The sensitivity of vibration

detection and motion detection

may not be appropriate.

Adjust the combination of sensors and their

sensitivity.

→

“Parking Mode” - “Detection Method”,

“G-Sensor Sensitivity”, “Motion Detection”

My vehicle was hit while parked,

but a video file wasn’t made.

This may be due to the service

life of the battery.

Please consult with the nearest authorized

Pioneer Service Station.

An accident occurred during

driving, but a video file wasn’t made.

The sensitivity of impact

detection may not be appropriate.

Adjust the sensitivity of vibration detection.

→

“Video Recording” - “G-Sensor Sensitivity”

There’s no sound when I play a

video file.

The sound recording setting may

be OFF.

Check the sound recording setting again.

→

“Sound Recording”

Guide to Recording Time and No. of Photos

The following table provides estimates of the video recording times and number of photos possible with different

“SD card partition” settings. The actual values will depend on various factors, such as the microSD card being used,

subject being recorded, and recording conditions.

The “SD card partition” setting is expressed as follows.

Example: [79% 10% 10% 1%]

As a percentage of memory card capacity, the continuous recording time will be 79%, the event recording time will

be 10%, the parking mode time will be 10%, and the number of photos will be 1%.

Guide to Recording Time and No. of Photos with an 8 GB microSD Card

SD card partition Continuous

Recording

Event Recording Parking Mode

Recording

No. of Photos

[79% 10% 10% 1%]

Approx. 1 hours 9

minutes

Approx. 6

minutes

Approx. 7

minutes

Approx. 500

photos

[59% 30% 10% 1%]

Approx. 45 minutes Approx. 24

minutes

Approx. 7

minutes

Approx. 500

photos

Remaining capacity*1 Approx. 15 minutes 20 files 10 files 400 photos

Guide to Recording Time and No. of Photos with an 32 GB microSD Card

SD card partition Continuous

Recording

Event Recording Parking Mode

Recording

No. of Photos

[79% 10% 10% 1%]

Approx. 4 hours 47

minutes

Approx. 33

minutes

Approx. 35

minutes

Approx. 2 000

photos

[59% 30% 10% 1%]

Approx. 3 hours 35

minutes

Approx. 1 hour 48

minutes

Approx. 35

minutes

Approx. 2 000

photos

Remaining capacity*1 Approx. 5 hours 20 files 10 files 400 photos

*1 This setting saves 20 files for event recording, 10 files for parking mode recording, 400 photos, and

continuous recordings in the remaining memory.

Guide to Recording Time When Fully Charged

Parking mode standby time: Maximum of approx. 50 minutes

■ Guide to Charging Time

Approx. 3 hours

Note

The recording times are estimates. The actual recording times will depend on the scenery being recorded and

charge status of the battery.

GPS

⨋

GPS (Global Positioning System) is a system that measures your current position by receiving position measure-

ment radio signals from GPS satellites.

⨋

The GPS satellite signals cannot pass through solid matter (except glass). The signals from GPS satellites may be

blocked when this product is in the following locations.

—

Inside tunnels and parking structures

–

On the bottom level of a two-level highway

—

Around concentrations of skyscrapers

–

In a dense forest

Trademarks & Copyrights

⨋

microSDHC logo is a trademark of SD-3C, LLC.

Please Recycle the Rechargeable Battery

(For other than American and Canadian Users)

This product uses a lithium ion battery. Lithium ion batteries are a valuable resource that can be recycled. Remove

the lithium ion battery from the product when replacing the battery or disposing of the product and recycle it. Re-

move the lithium ion battery from the product with the following procedure when disposing of the product.

CAUTION

⨋

The purpose of this section is to describe how to remove the internal battery when disposing of the product. This

product warranty will be void when you open the product.

⨋

Fully discharge the internal battery before removing it to prevent short circuits. The battery still retains a charge even when

the power does not turn on. We recommend that you leave the product for a number of days before removing the battery.

⨋

Eject the microSD card before removing the battery.

⨋

Be careful not to injure yourself when disassembling the case.

1 Remove the two screws on the

bottom of this product.

Note

Remove the screws with a commercially available #0

Phillips screwdriver.

2 Release the four hooks that hold

the display side of the case.

The locations of the hooks are shown in the

following diagram.

Note

The hooks can be released with a flathead screw-

driver.

3 Disconnect the display-side

connector.

4 Disconnect the speaker connector,

and remove the four screws

holding the board.

5 Lift up the board, disconnect the

connector, and remove the battery.

CAUTION

The battery is attached with double-sided tape. If the

battery is difficult to remove, insert a flathead screw-

driver in between the battery and case to remove it.

Be careful not to damage the battery when doing so.

Specifications

Recording Medium microSDHC card, Class 10 (8 GB to 32 GB)

Imaging Element CMOS sensor, 2.07 million pixels

Recording Angles 95° horizontal, 52° vertical, 111° diagonal

F-Number F2.0

Recording Resolution Full HD (1 920 × 1 080 pixels)

GPS Built-in

G-Sensor

3-axis G-sensor (During event recording: level can be set in 6 steps/

during parking mode: level can be set in 3 steps)

Recording Methods

Continuous recording/event recording/manual event recording/

parking mode recording

Video File Structure 20 sec/1 min/3 min

Display 2-inch LCD

Sound Recording Can be set to ON or OFF

Frame Rate 27.5 fps

Compression Method

(Video)

MP4 (H.264 + ADPCM codec)

Compression Method

(Photo)

JPEG

Power Supply Voltage This product 5 VDC (includes a 12 V/24 V Cigarette Lighter Power Cable)

Power Consumption 1.8 W (2.8 W when charging)

Dimensions (W × H × D)

61 mm × 67 mm × 39.2 mm (2-3/8 in. × 2-5/8 in. 1-1/2 in.)

(This product)

Weight

87 g(1.9 lbs)

(excluding the Installation Bracket and Cigarette Lighter Power Cable,

etc.)

Operating Temperature −10 °C to +60 °C (−50 °F to +140 °F)

Internal Battery Capacity 500 mAh

Note

Specifications and design are subject to possible modifications without notice due to improvements.

WARNING/DISPOSAL OF UNIT

(For American Users, Canadian Users)

Please do NOT attempt to change the battery yourself. If the battery has died and you do not want us to replace your

battery, you should follow the disposal instructions below:

⨋

Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances.

⨋

Always dispose of used batteries/electronics in accordance with the prevailing community regulations that apply

to the disposal of batteries/electronics. If there are no local regulations concerning battery/electronics disposal,

please dispose of the device in a waste bin for electronic devices.

⨋

Many electronics retailers now recycle batteries and other electronic components at no charge. Check to see

which ones in your area do so.

CYR1207-B.indd 21-24 2018/02/06 15:28:09

Pioneer ND-DVR100 Manual de utilizare

Marca: Pioneer

Model: ND-DVR100

Tip: Manual de utilizare

Descărcați PDF

raport

în alte limbi

English: Pioneer ND-DVR100 User manual
italiano: Pioneer ND-DVR100 Manuale utente

Pioneer ND-DVR100 Manual de utilizare

Pioneer ND-DVR100 Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente