Krups XP2240 10 Manualul proprietarului

XP2240

www.krups.com

EN

DE

PL

SK

CS

HU

RU

UK

RO

BG

AR

Downloaded from www.Manualslib.com manuals search engine

Français

1

English

 Before turning your espresso machine on, read these instructions for use carefully.

 Only use an earthed socket to plug the machine in. Check that the power voltage indicated on the

nameplate of the appliance corresponds to that of your mains installation.

 Do not remove the filter holder containing the ground coffee while the water is going through,

because the appliance is under pressure at that time.

 Do not use the appliance if the drip tray and the grid are not in place.

 Remove the plug if a problem occurs as the coffee is passing through, or before you clean the

appliance.

 Do not unplug the appliance by pulling on the cord, and do not run the cord over a sharp edge or

the corner of a piece of furniture.

 Ensure that the cord and your hands do not touch the hot parts of the appliance (filter holder, steam

nozzle).

 Never immerse your appliance in water.

 Keep the appliance out of the reach of children and do not leave the power cord hanging.

 Refer to the instructions for descaling your appliance.

SAFETY INSTRUCTIONS

ESPRESSO PART

a - Espresso and coffee maker water tank lid

b - Removable espresso water tank

c - Measuring spoon

d - Cup tray

e - Espresso on/off switch

f - Function switch

f1- Coffee position

f2-Off position

f3-Steam reheating position

f4-Steam position

g - Percolation head

h - Filter holder

i - Drip tray grid

j - Drip tray

k - Multidirectional steam nozzle

l - Cappuccino accessory

FILTER COFFEE MAKER PART

A - Filter holder cover

B - Lid opening button

C - Coffee maker water tank

D - Filter holder with locking handle

E - Graduated water level in coffee maker water

compartment

F - Graduated jug

G - Hotplate

H - Receptacle for “XS1000 Duo Filter” water fil-

ter (not supplied)

I - Filter coffee maker on/off button

DESCRIPTION

We appreciate your trust in and your loyalty to Krups products. Your machine is equipped with a filter

holder which boasts three exclusive systems:

- One for the gradual tamping of the espresso ground coffee as the filter holder is being positioned

(KTS "Krups Tamping System").

- Another is for ejecting the used grounds.

- The last is for using E.S.E. (Easy Serving Espresso) or soft pods.

It is also removable, and so can be frequently cleaned to be maintained in perfect working order. For your

safety, your filter holder is equipped with a locking system to keep it in place when the pressure rises.

Downloaded from www.Manualslib.com manuals search engine

English

2

 Do not turn the appliance on if it is damaged or if the cord is in poor condition.

 If the power cable is damaged, it must be replaced by the manufacturer, its after-sales service or any

person with similar qualifications, in order to avoid all danger.

 Make sure the filter holder is tightly fitted before running the coffee through.

 This appliance is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a person responsible for their safety.

 Children must be supervised to ensure that they do not play with the appliance.

The accessories and the removable parts of the appliance are not dishwasher safe.

This appliance is intended to be used only in the household.

It is not intended to be used in the following applications, and the guarantee will not apply for:

- Staff kitchen areas in stores, offices and other working environments;

- Farm houses,

- By clients in hotels, motels and other residential type environments,

- Bed and breakfast type environments.

This product has been designed for domestic use only. Any commercial use, inappropriate use or

failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will

not apply.

 Pump: 15 bars

 KTS: Krups Tamping System, for automatic and optimum tamping of the ground coffee.

 Filter holder with grounds ejection system. Compatible with ground coffee and all types of pods, ESE

or flexible.

 Steam function

 Automatic shutoff after 30 minutes (protection of the environment).

 Removable water compartment (capacity: 1.1 litres)

 Power: 2450 W

 Voltage: 220-240 V – 50/60Hz

 Anti-overheating safety mechanisms

 Dimensions: H. 320 mm, L. 345 mm, P. 290 mm

IMPORTANT!

Operating voltage: This appliance is designed to work only at alternating current

220-240 V.

Type of use: Your appliance is EXCLUSIVELY designed FOR USE IN THE HOME.

MAKING AN ESPRESSO

TIPS

 For an espresso with intense flavour, we recommend using freshly ground special espresso coffee which

is ideal for the delicacy of this type of drink, along with cups with a capacity not exceeding 50 ml.

 Keep the espresso ground coffee in the refrigerator, it retains its flavour longer.

 Do not fill your filter holder to the brim, but use the measuring spoon (1 cup = 1 spoon - 2 cups =

2 spoons).

TECHNICAL CHARACTERISTICS:

Downloaded from www.Manualslib.com manuals search engine

Français

3

English

 If you do not use the appliance for more than 5 days, rinse and drain the water tank.

 Before removing the water tank to fill or empty it, always turn the appliance off.

 Always place the unit on a flat, stable, heat-resistant surface.

 To obtain an espresso at exactly the right temperature, we recommend that you preheat your cups.

 To prolong the life of your appliance, we recommend you always use a Claris Aqua Filter System

cartridge (reference: F088) and that you descale the appliance at regular intervals.

IMPORTANT!

Before using for the first time, after a prolonged period of inactivity or after desca-

ling, the appliance must be cleaned as described in paragraph 1: "USING FOR THE

FIRST TIME".

Before using your espresso machine, clean all the accessories in soapy water and dry them.

If you do not use the Claris cartridge, refer directly to the section "RINSE YOUR APPLIANCE.

INSTALLATION OF THE CLARIS CARTRIDGE

If you use a Claris cartridge, please apply the following procedure to fill it with water.

 Screw the Claris filter into the bottom of the water tank.

 Fill it with water (fig. 2).

 Replace the water tank by positioning it firmly, to ensure the water inlet is in place, and close the lid

(fig.3)

 Turn the appliance on by pressing the "On / Off" button (fig.4).

 Turn the switch to the “steam preheating” position. Once the light stops blinking, turn back the switch

to the "off" position. Repeat this operation 4 more times.

To make sure the Claris cartridge is full of water, place a container under the percolation head, turn the

switch to the "coffee" position and make sure some water is running through. If not, repeat the above

procedure.

IMPORTANT:

The Claris cartridge needs to be replaced every 2 months if it is used daily.

RINSING YOUR APPLIANCE

Then rinse the appliance. To do so:

 Turn the machine on and fill the water tank

 Insert the filter holder (without ground coffee) in the appliance (fig.7).

 Place a container of sufficient volume under the filter holder.

 As soon as the appliance reaches the required temperature, the "on/off" light stops flashing. Turn the

switch to the “coffee” position and let all the water run from the water compartment (fig.8).

 If necessary, stop the operation by turning the switch to the "off" position (fig. 9) to empty the

container and then resume the operation.

 Empty the container and unlock the filter holder: press the "OPEN" button on the filter holder and

turn it to the left (fig.10).

1.USING FOR THE FIRST TIME

Downloaded from www.Manualslib.com manuals search engine

English

4

In order to release all the aromas of the coffee and ensure your complete satisfaction, this machine

pre-infuses each coffee. The pump works 3 seconds, stops the following 3 seconds and then the cycle

continues until the end of the preparation.

PREHEATING THE ACCESSORIES

 For the best results, we recommend that you preheat the accessories (filter holder and cups)

without ground coffee. To do so:

 Fill the water tank and turn the machine on (fig. 1, 2, 3 and 4).

 Put the filter holder in place, place the cups below.

 As soon as the appliance reaches the required temperature, the light stops flashing.

 Turn the switch to the “coffee” position (fig.8).

 When the cups are filled with hot water, turn the switch to the "off" position (fig.9).

 Remove the cups.

 Unlock the filter holder: press “OPEN” while turning the filter holder to the left and remove it from the

machine (fig. 10).

Note: When the appliance is hot, the espresso cups can be preheated on the cup warming plate.

WITH ESPRESSO GROUND COFFEE

The type of coffee you choose will determine the strength and taste of your espresso.

 Fill the water tank and turn the machine on (fig. 1, 2, 3 and 4). During the pre-heating phase, the

indicator lamp will flash.

 Using the measuring spoon, place the espresso ground coffee in the filter holder: one spoon (full to

the brim) per cup (fig.5).

 Remove the excess espresso ground coffee from the edge of the filter.

IMPORTANT:

Do not tamp the coffee down in the filter holder. The coffee is automatically tamped

using the KTS “Krups Tamping System”.

 Only use Espresso Ground Coffee. Do not use any other coffee such as instant coffee.

 Insert the filter holder in the appliance by turning it to the right as far as it will go, up to the stop

(fig.7).

 Put one or two cups under the filter holder.

 As soon as the appliance reaches the required temperature, the light stops flashing.

 Turn the switch to the “coffee” position (fig.8).

 When you have the desired amount of coffee, turn the switch to the "off" position (fig.9)

 Unlock the filter holder: press “OPEN” while turning the filter holder to the left and remove it from the

machine (fig. 10).

Remove the grounds using the ejection system by pressing the "EJECT" button located between the

two coffee outlet nozzles (fig.11). Wash the filter under running water, pressing "EJECT" to eliminate

the remnants of grounds.

The filter holder now can be filled again to prepare other espressos.

WITH AN “E.S.E." ESPRESSO POD

“ESE” for “Easy Serving Espresso" is a packaged pod (44 mm diameter) of 7g of selected

coffee, ground and compacted between two paper filters, specially designed to make Italian

style ristretto (small and strong) espressos.

2. MAKING AN ESPRESSO

Downloaded from www.Manualslib.com manuals search engine

Français

5

English

This system allows immediate, simple, clean and comfortable use of your machine.

 Fill the water tank and turn the machine on (fig. 1, 2, 3 and 4). During the pre-heating phase, the

indicator light will flash.

 Tear the excess paper off the pod, put the E.S.E. pod in the filter holder with the red writing facing

down (fig.6).

Be sure to place all the paper inside the filter holder, otherwise there might be leaks.

 If the pod is not placed correctly, the coffee you'll get in the cup will not be satisfactory.

 Never use two pods together.

 Follow the steps in figures 7 to 11 in the preparation of an espresso.

WITH A SOFT POD

Your machine is also compatible with soft pods (usually 60 mm in diameter). Given that this

kind of pod is not specifically designed for espresso machines, you will get a less full-bo-

died espresso than with an E.S.E. pod.

 Fill the water tank and turn the machine on (fig. 1, 2, 3 and 4). During the pre-heating phase, the

indicator light will flash.

 Place a soft pod in the filter holder. Never use two pods together. If the pod is not placed correctly,

the coffee you'll get in the cup will not be satisfactory.

 Follow the steps in figures 7 to 11 in the preparation of an espresso.

 The steam is used to foam up milk (for example to make a cappuccino or a cafe latte).

 To produce steam, the pump works by emitting an intermittent noise.

 After using the steam function, the appliance cools automatically by pumping cold water

through the heating system. During the pumping cycles, the excess steam in the heating system

is released with the hot water into the drip tray.

 The steam and noise that accompany this phase are important for cooling the appliance.

NOTE:

during and after using the appliance, the metal parts of the steam nozzle can

be very hot.

USING THE STEAM NOZZLE TO FROTH MILK

 Fill the water tank and turn the machine on (fig. 1, 2, 3 and 4).

 Turn the switch to the “steam preheating” position. The indicator lamp flashes (fig.12).

 Turn the steam nozzle towards the outside of the appliance.

 Pour 60 to 100ml of very fresh, very cold milk into a small container of about 1/2 litre and which can

go under the steam nozzle. The milk and its container should be quite cold.

 We recommend that you use pasteurised or UHT milk and that you avoid untreated milk.

 As soon as the indicator lamp stops blinking, plunge the steam nozzle into the milk.

 Turn the switch to the “steam” position (fig. 13).

 For good results, hold the nozzle at the bottom of the container for about 25 seconds while the milk

heats (without however touching the bottom). Then bring the container down gradually so that the

nozzle moves up towards the surface (without ever coming out of the milk) (fig.14).

 Once the froth has been formed, turn the switch to the “stop” position (fig.15).The appliance will

now automatically cool itself by launching 3 intermittent pumping cycles. Once this is automatic

operation is complete, you can make a coffee.

3. STEAM FUNCTION

Downloaded from www.Manualslib.com manuals search engine

English

6

IMPORTANT:

To avoid blocking the holes in the cappuccino accessory, the milk foam should

never reach the black plastic ring.

It is important to clean the cappuccino accessory after each use to prevent the milk from drying out on

the inside. To do so:

 Place the cappuccino accessory in a container filled with water.

 Turn the switch to the “steam preheating” position.

 Once the light has stopped blinking, turn the switch to the "steam" position (to remove the remaining

milk) and run the steam for 30 seconds.

 Turn the switch to the “stop” position.

 Clean the cappuccino accessory with a damp cloth.

For thorough cleaning of the cappuccino accessory, see paragraph 4, "Cleaning and Maintenance".

ATTENTION!

The steam nozzle is still hot!

Do not wash your espresso machine accessories in the dishwasher.

OF THE APPLIANCE

 Unplug the power supply before cleaning and let the appliance cool down.

 Clean the outside of the appliance from time to time with a damp sponge. After use, the water tank

must be emptied.

 Rinse the inside of the tank regularly.

 When a thin white layer starts to form in the tank, carry out a descaling operation (see paragraph 5

"DESCALING").

OF THE DRIP TRAY

 The drip tray must be emptied after each time the appliance is used. Lift up slightly and remove it

from the appliance.

 If multiple espressos are prepared one after the other, it should be emptied from time to time (every

7 to 8 espressos approximately) (fig.19&20)

 The presence of water is normal and is not the sign of a leak.

 If necessary, clean the drip drawer and its grid with water and a little gentle washing-up liquid, rinse

and dry. When reassembling the components, make sure everything is in the right place.

OF THE PERCOLATION HEAD AND FILTER HOLDER

 They must be cleaned after each use. Simply wipe a damp cloth over the percolation head (fig. 21)

and clean the filter holder under running water and a little gentle washing-up liquid.

 Do not use alcohol or solvent-based cleaning products.

 For best results, you can activate the "EJECT" button several times during rinsing.

We recommend that you shake the filter holder thoroughly in order to remove all the water.

4. CLEANING AND MAINTENANCE OF THE APPLIANCE

Downloaded from www.Manualslib.com manuals search engine

Français

7

English

 Rinse and dry.

 When not using your espresso coffee maker, do not leave the filter holder on it, in order to prevent

wear to the joint.

For more thorough cleaning, the filter holder can be dismantled:

 You can remove the black plastic part where the coffee outlets and the "EJECT" button are to be

found: turn it to the left and pull sharply (fig. 22).

 Clean the various components under running water and a little gentle washing-up liquid.

 Rinse and dry.

 Replace the black plastic part in the metal component, turn it to the right until the two arrows on each

component line up.

 If the percolation head is very clogged, unscrew the grid using a Phillips screwdriver, clean it and

reassemble it, screwing tightly (fig.23).

OF THE CAPPUCCINO ACCESSORY

 To clean it, unclip it from its articulated arm by pulling the black ring downwards (fig.16).

 This accessory is composed of 3 parts: the inner tube, the outer tube and a stainless steel protection.

 To clean this accessory, take it apart completely.

 To remove the inner tube, unscrew the end of the steam nozzle.

 You can then remove the stainless steel protection.

 Clean the 3 components under running water and a little gentle washing-up liquid (fig. 17).Rinse and

dry.

 Once the steam nozzle has been cleaned and reassembled, taking care to tighten it properly, replace

it on its articulated arm, ensuring that the mobile black plastic ring is held downwards.

 Then make a circular movement upwards in order to click with the steam nozzle. Then clip the black

plastic part by moving it upwards (fig.18).

The guarantee does not cover appliances which become faulty because the descaling operations have

not been carried out regularly.

Descale your espresso maker regularly with white vinegar or a packet of citric or sulphamic acid which

you can buy in hardware stores.

We recommend that you use the Krups descaling accessory, reference F054, available in Krups

authorised service centres. In addition to two descaling doses, this accessory includes a water hard-

ness tape tester to assess the required frequency with which your appliance should be descaled, in nor-

mal use. The amount of scale depends on the hardness of the water but also the level of use.

The frequency of descaling given by the F054 accessory is therefore purely indicative. If in doubt, it is

recommended to descale every month.

5.DESCALING

DESCALING FREQUENCY

Ave. number

coffees per week

Soft water

(<19°th)

Hard water

(19-30°th)

Very hard water

(>30°th)

Less than 7 Once a year Every 8 months Every 6 months

From 7 to 20 Every 4 months Every 3 months Every 2 months

Over 20 Every 3 months Every 2 months Every month

Downloaded from www.Manualslib.com manuals search engine

English

8

DESCALING THE STEAM CIRCUIT AND ESPRESSO

 Empty the water compartment and put it back in place.

 If your appliance is fitted with our Claris - Aqua Filter System F088 cartridge, please remove the

cartridge before the descaling operation.

 Fill the tank with a mixture composed of three parts water for one part white vinegar or a mixture of

½ litre of water and a packet of citric or sulphamic acid available in hardware stores.

 Insert the filter holder (without ground coffee) into the appliance and lock it by turning it to the right

as far as it will go.

 Place a container underneath the steam nozzle.

 Press the “on-off” button (fig.4).

 Immediately turn the switch to the “steam” position (without stopping at the "steam preheating"

position) (fig.13).

 Let the mixture run through the nozzle until steam appears.

 Turn the switch back to the “stop” position (fig.15).

 Place a container of sufficient volume under the filter holder.

 Once the light stops blinking, turn the switch to the “coffee” position and let half of the mixture run

through (fig.8).

 Turn the machine off using the "on off" button and leave the switch on the "coffee" position.

 After 15 minutes, turn the machine back on.

 Let the rest of the water run through.

 Turn the switch to the “stop” position.

RINSING

IMPORTANT!

After descaling, perform 2-3 rinsing operations with clear water (without es-

presso ground coffee), as described in paragraph 1 "using for the first time".

Remember to rinse the steam circuit by following the instructions below:

 Place a container underneath the steam nozzle.

 Press the “on-off” button (fig.4).

 Immediately turn the switch to the “steam” position (without stopping at the “steam preheating”

position). (fig.13).

 Let the water run through the nozzle until steam appears.

 Turn the switch back to the “stop” position.

 The appliance is descaled and ready to be used again.

 Your appliance is covered by guarantee but any connection or handling error or any use of the

appliance other than that described in these instructions renders the guarantee invalid.

 This product has been designed for domestic use only. Any commercial use, inappropriate use or

failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee

will not apply.

 No repair made because of a lack of descaling will be covered by the guarantee.

 For any after-sales and spare parts problem, consult our Helpline or an authorised service dealer.

Helpline:

0845 602 1454 - UK

01 677 4003 - ROI

or consult our web site: www.krups.co.uk

6.GUARANTEE

Downloaded from www.Manualslib.com manuals search engine

Français

9

English

7. PROBLEMS, PROBABLE CAUSES AND CORRECTIVE ACTIONS

The water tank leaks

when it is carried.

The valve at the bottom of

the tank is dirty or defective.

The valve is blocked by

scale.

Wash the water tank and operate the valve at the

bottom of the tank with your finger.

Descale the appliance (paragraph 5).

Water leaks under

the appliance.

Internal leak.

Check the position of the tank. If the fault persists,

do not use the appliance, contact an approved

service centre.

Problems Possible causes Solutions

The espresso is not

hot enough.

The cups and the filter

holder are cold.

Preheat the accessories: cups and filter holder

(see paragraph 2).

The filter holder is

blocked

You forgot to unlock the

filter.

Press “OPEN” while turning the filter holder to the

left.

The grounds are not

dry after water has

run through.

You have not tightened the

filter holder properly.

Tighten the filter holder by turning it to the right

as far as it will go, up to the stop.

The coffee flows too

slowly.

You have tightened the filter

holder too much.

The ground coffee is too

fine, too fatty or floury.

The filter holder is dirty.

The water drip-through grid

is clogged.

Loosen it slightly.

Choose a slightly larger grained ground coffee.

Clean your filter holder (see paragraph 4).

When the appliance has cooled, clean the

percolation head with a damp cloth. (fig.21).

The water does not

run through.

No water in the tank.

Tank poorly fitted.

The filter is clogged. The

ground coffee is too fine.

Your appliance is scaled up.

The Claris cartridge has not

been primed.

Fill the tank.

Press firmly on the tank.

Clean the filter holder (see paragraph 4) and try

a less fine grind.

See paragraph 5

Refer to section 1 "Using for the first time" and

"installation of the Claris cartridge".

Water leaks from

the filter holder after

an espresso has

been made.

The switch has not been

positioned on the "stop"

position.

Formation of scale because

of especially hard water.

Turn off your appliance by positioning the switch

on the "stop" position. (fig.9).

Descale the appliance according to the manual

(see paragraph 5).

Coffee grounds in

the cup.

The filter holder is clogged.

The grind is too fine.

Clean the filter holder with hot water. Press

“EJECT” to eliminate the remnants of the

grounds. Shake to drain the water.

Choose a slightly larger grind.

Downloaded from www.Manualslib.com manuals search engine

English

10

The machine leaks

on the sides of the

filter holder.

The filter holder has not

been properly positioned.

The edge of the filter holder

is clogged by ground

coffee.

Pod poorly positioned in the

filter.

Put the filter holder in place and lock it (by

turning it to the right as far as it will go, up to the

stop).

Remove excess coffee.

Place all the paper inside the filter holder.

Your espresso

tastes bad.

After descaling, the rinsing

was not performed properly.

Rinse the appliance according to the manual

(see paragraph 5).

The appliance does

not work

The pump was unprimed

due to lack of water.

The detachable water tank

is not properly clicked in

place.

Fill the water tank and reprime the pump (see

paragraph 1). Avoid completely emptying the

tank.

Click the tank into place by pressing firmly.

The steam nozzle

does not froth the

milk.

The steam nozzle is blocked

or scaled up.

The milk is too hot.

The shape of the container

is not appropriate.

The milk is not fresh enough.

Descale the steam nozzle (see paragraph 5) or

unblock it with a needle.

Use cold milk.

Use a small pitcher.

Use very fresh, very cold milk. You may also

need to change your brand of milk.

Problems Possible causes Solutions

Crackling is heard....

This is normal. It is the filter

holder safety lock.

The pump is

unusually noisy.

No water in the tank.

Tank poorly fitted.

Stop the appliance, fill the water tank and turn

the machine back on.

Press down firmly on the tank.

The cups are not

filled equally.

The filter holder is clogged. See paragraph 4.

Downloaded from www.Manualslib.com manuals search engine

Français

11

English

FILTER COFFEE MAKER PART

Before using for the first time

 Operate the coffee maker for the first time with 1 litre of water, without ground coffee, by filling the

water compartment and pressing the on/off button on the filter coffee maker side.

IMPORTANT

The quality of the water you use is crucial to the taste of your coffee. You must

make sure that the water has just come out of the tap (so that it has not had

time to become stagnant in contact with the air), that it has no smell of chlorine

and that it is relatively cold.

We recommend that the water be filtered with a Krups Duo Filter cartridge reference XS

1000 available in stores.

 Use filter paper n° 4.

 Fill the water compartment using the graduated jug, according to the desired number of cups

(fig.24).

 Observe the maximum amount of water in the tank, using the water level.

 Lift the lid by pressing the OPEN button (fig.25).

 Place a paper filter in the filter holder and fill it with ground coffee using the measuring spoon, with

one spoon per cup of coffee (fig. 26).

 Press the "on/off" button on the filter coffee maker part, the light comes on, the cycle starts.

 The filter coffee maker is fitted with an anti-drip appliance which enables you to serve the coffee

before it has completely finished running through. If you serve yourself a coffee while the cycle is still

running, place the jug back in position quickly to prevent any spillage.

 The jug and lid are compatible for reheating in microwave ovens.

 Never leave your empty jug in the microwave oven.

 To remove the coffee grinds, remove the filter holder from the appliance.

 Unplug the appliance.

 Do not clean when hot.

 Clean with a damp cloth or sponge.

 Never place it in water or under a running tap.

Descaling

Number of cycles between 2 descaling operations

Without duo filter With duo filter

Soft water 60 120

Hard water 40 80

DESCALING THE FILTER COFFEE MAKER

CLEANING

MAKING COFFEE

Downloaded from www.Manualslib.com manuals search engine

English

12

To descale your coffee maker, you can use:

- either a sachet of descaler from the stores diluted in 250ml of water

- Or 250 ml of white vinegar available from hardware stores.

 Pour the descaler or vinegar in the water compartment and turn the coffee maker on (without filter

and without ground coffee).

 Let half of this mixture run through into the jug then turn the appliance off by pressing the "On / Off"

button.

 Leave for one hour.

 Turn the appliance back on by pressing the "On / Off" button and let the rest of the water run through.

 Rinse the coffee maker by running two jugs of fresh water through.

The guarantee does not cover coffee makers that do not work properly or do not work at all

because they have not been descaled.

-

IN CASE OF PROBLEM:

Problems Solutions

The coffee maker does not come on: Check the connection

There seems to be a leak:

Make sure the water tank was not filled beyond the

limit

The water takes too long to run

through or the appliance makes exces-

sive noise:

Descale your appliance.

Your appliance still does not work? Contact a Krups approved service centre.

END OF LIFE ELECTRICAL AND ELECTRONIC PRODUCT

Environmental protection first!



Your appliance contains valuable materials which can be recovered or recycled.



Leave it at a local civic waste collection point.

If you have any product problems or queries, please contact our Customer Relations Team first for expert

help and advice:

Helpline:

0845 602 1454 - UK

(01) 677 4003 - ROI

web site: www.krups.co.uk

Downloaded from www.Manualslib.com manuals search engine

Français

13

Deutsch

TEIL ESPRESSOMASCHINE

a - Deckel der Wasserbehälter Espresso- und

Kaffeemaschine

b - Abnehmbarer Wasserbehälter der Espresso-

maschine

c - Messlöffel

d - Tassenvorwärmplatte

e - An/Aus Knopf Espresso

f - Funktionswähler

f1 - Position Kaffee

f2 - Position Stop

f3 - Position Vorheizen Dampf

f4 - Position Dampf

g - Perkolationsteil

h - Filterhalter

i - Abstellgitter

j - Tropfenauffangschale

k - orientierbare Dampfdüse

l -Cappuccino-Zubehörteil

TEIL KAFFEEMASCHINE ZUR ZUBEREI-

TUNG VON F ILTERKAFFEE

A - Filterhalter Deckel

B - Knopf zum Öffnen des Deckels

C - Wasserbehälter der Kaffeemaschine

D - Filterhalter mit Feststell-Griff

E - Wasserstandsanzeige mit Messeinteilung des

Wasserbehälters der Kaffeemaschine

F - Kanne mit Messeinteilung

G - Warmhalteplatte

H - Behälter für „Duo Filter XS1000“ Wasserfilter

(Filter wird nicht mitgeliefert)

I - An/Aus Knopf der Kaffeemaschine zur Zube-

reitung von Filterkaffee

 Bitte lesen Sie diese Gebrauchsanweisung vor der Inbetriebnahme der Espressomaschine aufmerksam

durch. Bei unsachgemäßen Gebrauch, entgegen der Gebrauchsanweisung übernimmt Krups keine Haftung

und die Garantie erlischt.

 Schließen Sie das Gerät unbedingt nur an geerdete Steckdosen an. Vergewissern Sie sich, dass die auf

dem Typenschild Ihres Geräts angegebene Betriebsspannung mit der Spannung Ihrer Elektroinstallation

übereinstimmt.

 Entnehmen Sie den mit Kaffeemehl gefüllten Filterhalter nicht während des Wasserdurchlaufs, da das Gerät

zu diesem Zeitpunkt unter Druck steht.

 Setzen Sie das Gerät nur mit eingesetzter Tropfenauffangschale und eingesetztem Gitter in Betrieb.

 Bei Problemen beim Kaffeedurchlauf und vor der Reinigung des Geräts muss der Stecker gezogen werden.

 Stecken Sie das Gerät nicht durch Ziehen am Stromkabel aus und lassen Sie das Stromkabel nicht mit

scharfen Kanten und Möbelecken in Berührung kommen.

 Sorgen Sie dafür, dass das Stromkabel und Ihre Hände nicht mit den heißen Teilen des Geräts (Filterhalter,

Dampfdüse) in Kontakt gerät.

 Tauchen Sie das Gerät , das Kabel und den Stecker nicht ins Wasser.

SICHERHEITSHINWEISE

Wir bedanken uns für Ihr Vertrauen und Ihre Treue zu den Produkten von Krups. Ihr Gerät ist mit einem Filter-

halter mit drei exklusiven Funktionen ausgestattet:

- Langsames Festdrücken des Kaffeemehls beim Einsetzen des Filterhalters (KTS System „Krups Tamping

System“).

- Auswurf des Kaffeesatzes.

- Und schließlich wahlweiser Einsatz von E.S.E. (Easy Serving Espresso) Kaffeepads oder weichen Kaf-

feepads.

Außerdem ist der Filterhalter abnehmbar, kann deshalb regelmäßig gereinigt werden und bleibt stets in opti-

malem Zustand. Aus Sicherheitsgründen ist der Filterhalter mit einem Verriegelungssystem ausgestattet, das

dafür sorgt, dass er beim Ansteigen des Drucks nicht verrutscht.

BESCHREIBUNG

Downloaded from www.Manualslib.com manuals search engine

Deutsch

14

 Bewahren Sie das Gerät nicht in Reichweite von Kindern auf und lassen Sie das Stromkabel nicht

herunterhängen.

 Halten Sie sich beim Entkalken an die Anweisungen der Gebrauchsanweisung.

 Setzen Sie das Gerät nicht in Betrieb, wenn es beschädigt ist oder wenn sich das Stromkabel in schlechtem

Zustand befindet.

 Wenn das Stromkabel beschädigt ist, darf es, um jedwede Gefahr zu vermeiden, nur vom Hersteller, dem

Kundendienst oder ähnlich qualifizierten Personen ausgetauscht werden.

 Vergewissern Sie sich vor dem Durchlaufen des Kaffees, dass der Filterhalter fest sitzt.

 Dieses Gerät darf nicht von Personen (inbegriffen Kindern) mit eingeschränkten körperlichen, sensorischen

oder geistigen Fähigkeiten benutzt werden. Das Gleiche gilt für Personen, die keine Erfahrung mit dem Gerät

besitzen oder sich mit ihm nicht auskennen, außer wenn sie von einer für ihre Sicherheit verantwortlichen

Person beaufsichtigt werden oder von dieser mit dem Gebrauch des Gerät vertraut gemacht wurden.

 Kinder müssen beaufsichtigt werden, damit sie nicht mit dem Gerät spielen. Achtung:austretender Dampf

und Wasser sind sehr heiß

 Das Zubehör und die abnehmbaren Teile des Geräts sind nicht spülmaschinengeeignet.

Dieses Gerät ist ausschließlich für den Haushaltsgebrauch bestimmt.

Die Garantie gilt nicht für die Benutzung des Geräts in folgenden Bereichen:

- In Kochecken für das Personal in Geschäften, Büros und sonstigen Arbeitsumfeldern,

- auf Bauernhöfen,

- für den Gebrauch durch Gäste von Hotels, Motels und sonstigen Umfeldern mit Beherbergungscharakter,

- in Umfeldern wie Gästezimmern.

 Pumpe: 15 Bar

 KTS: Krups Tamping System zum automatischen und optimalen Andrücken des Kaffeemehls

 Filterhalter mit Funktion Auswurf des Kaffeesatzes. Geeignet für gemahlenen Kaffee sowie für alle Arten von

 Kaffeepads, E.S.E. und weiche.

 Dampffunktion

 Automatische Abschaltung nach 30 Minuten (Umweltschutz).

 Abnehmbarer Wasserbehälter (Kapazität: 1,1 Liter)

 Leistung: 2450 W

 Spannung: 220-240 V – 50/60Hz

 Sicherheits-Überhitzungsschutz.

 Abmessungen: H. 320 mm, B. 345 mm, T. 290 mm

WICHTIG!

Betriebsspannung: Dieses Gerät ist ausschließlich für den Betrieb mit Wechselstrom

angelegt (220-240 V).

Verwendungsart: Dieses Gerät ist AUSSCHLIEßLICH FÜR DEN HAUSGEBRAUCH

bestimmt.

TEIL ESPRESSOMASCHINE

HINWEISE

 Um ein intensives Aroma Ihres Espressos zu gewährleisten, sollten Sie einen speziellen, frisch gemahlenen

Espresso-Kaffee verwenden, der für diese besonders anspruchsvolle Zubereitung geeignet ist. Außerdem

sollten die verwendeten Tassen nicht mehr als 50 ml Fassungsvermögen besitzen.

 Bewahren Sie das Kaffeemehl im Kühlschrank auf, da es auf diese Weise sein Aroma länger behält.

TECHNISCHE EIGENSCHAFTEN:

Downloaded from www.Manualslib.com manuals search engine

Pagina se încarcă ...

Krups XP2240 10 Manualul proprietarului

Krups XP2240 10 Manualul proprietarului

în alte limbi

Lucrări conexe

Alte documente