Grundfos R100 Installation And Operating Istructions

Marca: Grundfos

Model: R100

Tip: Installation And Operating Istructions

R100

GRUNDFOS INSTRUCTIONS

Installation and operating instructions

R 100

For Sales & Service Contact

2650 E. 40th Ave. • Denver, CO 80205

Phone 303-320-4764 • Fax 303-322-7242

1-800-833-7958

www.geotechenv.com

Declaration of Conformity

We Grundfos declare under our sole responsibility that the product R100, to which this declaration

relates, is in conformity with the Council Directives on the approximation of the laws of the EC Member

States relating to

– Electromagnetic compatibility (89/336/EEC).

Standards used: EN 61000-6-2 and EN 61000-6-3.

Konformitätserklärung

Wir Grundfos erklären in alleiniger Verantwortung, dass das Produkt R100, auf das sich diese Erklärung

bezieht, mit den folgenden Richtlinien des Rates zur Angleichung der Rechtsvorschriften der EG-Mit-

gliedstaaten übereinstimmt:

– Elektromagnetische Verträglichkeit (89/336/EWG).

Normen, die verwendet wurden: EN 61000-6-2 und EN 61000-6-3.

Déclaration de Conformité

Nous Grundfos déclarons sous notre seule responsabilité que le produit R100 auquel se réfère cette

déclaration est conforme aux Directives du Conseil concernant le rapprochement des législations des

Etats membres CE relatives à

– Compatibilité électromagnétique (89/336/CEE).

Standards utilisés: EN 61000-6-2 et EN 61000-6-3.

Dichiarazione di Conformità

Noi Grundfos dichiariamo sotto la nostra esclusiva responsabilità che il prodotto R100 al quale questa

dichiarazione si riferisce è conforme alle Direttive del Consiglio concernente il ravvicinamento delle legi-

slazioni degli Stati membri CE relative a

– Compatibilità elettromagnetica (89/336/CEE).

Standard usati: EN 61000-6-2 e EN 61000-6-3.

Declaración de Conformidad

Nosotros Grundfos declaramos bajo nuestra única responsabilidad que el producto R100 al cual se

refiere esta declaración es conforme con las Directivas del Consejo relativas a la aproximación de las

legislaciones de los Estados Miembros de la CE sobre

– Compatibilidad electromagnética (89/336/CEE).

Normas aplicadas: EN 61000-6-2 y EN 61000-6-3.

Declaração de Conformidade

Nós Grundfos declaramos sob nossa única responsabilidade que o produto R100 a qual se refere esta

declaração está em conformidade com as Directivas do Conselho das Comunidades Europeias relativas

à aproximação das legislações dos Estados Membros respeitantes à

– Compatibilidade electromagnética (89/336/CEE).

Normas utilizadas: EN 61000-6-2 e EN 61000-6-3.

Δήλωση Συμμόρφωσης

Εμείς η Grundfos δηλώνουμε με αποκλειστική μας ευθύνη ότι το προιόν R100, με το οποίο σχετίζεται η

παρούσα δήλωση, είναι σε συμφωνία με την Οδηγία του Συμβουλίου επί της σύγκλισης των νόμων των

Κρατών Mελών της Ευρωπαικής Ενωσης σε σχέση με τα

– Ηλεκτρομαγνητική συμβατότητα (89/336/EEC).

Πρότυπα που χρησιμοποιήθηκαν: EN 61000-6-2 και EN 61000-6-3.

Overeenkomstigheidsverklaring

Wij Grundfos verklaren geheel onder eigen verantwoordelijkheid dat het product R100, waarop deze

verklaring betrekking heeft in overeenstemming zijn met de Richtlijnen van de Raad inzake de onderlinge

aanpassing van de wetgevingen van de Lid-Staten betreffende

– Elektromagnetische compatibiliteit (89/336/EEG).

Normen: EN 61000-6-2 en EN 61000-6-3.

Försäkran om överensstämmelse

Vi Grundfos försäkrar under ansvar, att produkten R100, som omfattas av denna försäkran, är i över-

ensstämmelse med Rådets Direktiv om inbördes närmande till EU-medlemsstaternas lagstiftning,

avseende

– Elektromagnetisk kompatibilitet (89/336/EC).

Använda standarder: EN 61000-6-2 och EN 61000-6-3.

Vastaavuusvakuutus

Me Grundfos vakuutamme yksin vastuullisesti, että tuote R100, jota tämä vakuutus koskee, noudattaa

direktiivejä jotka käsittelevät EY:n jäsenvaltioiden koneellisia laitteita koskevien lakien yhdenmukai-

suutta seuraavasti:

– Elektromagneettinen vastaavuus (89/336/EY).

Käytetyt standardit: EN 61000-6-2 ja EN 61000-6-3.

Overensstemmelseserklæring

Vi Grundfos erklærer under ansvar, at produktet R100, som denne erklæring omhandler, er i overens-

stemmelse med Rådets direktiver om indbyrdes tilnærmelse til EF medlemsstaternes lovgivning om

– Elektromagnetisk kompatibilitet (89/336/EØF).

Anvendte standarder: EN 61000-6-2 og EN 61000-6-3.

Deklaracja zgodności

My, Grundfos, oświadczamy z pełną odpowiedzialnością, że nasz wyrób R100 którego deklaracja

niniejsza dotyczy, zgodny jest z następującymi wytycznymi Rady d/s ujednolicenia przepisów prawnych

krajów członkowskich EG:

– zgodność elektromagnetyczna (89/336/EWG),

zastosowane normy: EN 61000-6-2 i EN 61000-6-3.

Декларация о соответствии

Компания Grundfos заявляет о своей исключительной ответственности за то, что изделия модели

R100, на которые распространяется эта декларация, соответствуют нижеследующим

рекомендациям Совета по унификации правовых норм стран - членов Европейского Союза:

– Электромагнитная совместимость (89/336/ЕЭС).

Применявшиеся стандарты: Евростандарт EN 61000-6-2 и EN 61000-6-3.

Konformitási nyilatkozat

Mi, a Grundfos egyedüli felelősséggel kijelentjük, hogy a R100 termék, amelyre jelen nyilatkozat

vonatkozik, megfelel az Európai Unió tagállamainak jogi irányelveit összehangoló tanács alábbi

irányelveinek:

– Elektromágneses összeférhetőség (89/336/EGK).

Alkalmazott szabványok: EN 61000-6-2 és EN 61000-6-3.

Izjava o ustreznosti

Mi, Grundfos, pod polno odgovornostjo izjavljamo, da so izdelki R100, na katere se ta izjava nanaša, v

skladu z naslednjimi smernicami Sveta za uskladitev pravnih predpisov držav članic Evropske skupnosti:

– Elektromagnetna kompatibilnost (89/336/EWG).

Uporabljeni normi: EN 61000-6-2 in EN 61000-6-3.

Izjava o usklađenosti

Mi, Grundfos, izjavljujemo uz punu odgovornost da je proizvod R100, na kojeg se ova izjava odnosi,

sukladan smjernicama Savjeta za prilagodbu propisa država članica EZ:

– Elektromagnetska kompatibilnost (89/336/EEZ).

Korištene norme: EN 61000-6-2 i EN 61000-6-3.

Izjava o konformitetu

Mi, Grundfos, izjavljujemo pod potpunom odgovornošću da su proizvodi R100 na koje se odnosi ova

izjava u saglasnosti sa smernicama i uputstvima Saveta za usaglašavanje pravnih propisa članica

Evropske unije:

– elektromagnetna usaglašenost (89/336/EWG),

korišćeni standardi: EN 61000-6-2 i EN 61000-6-3.

Declaraţie de conformitate

Noi, Grundfos, declarăm asumându-ne întreaga responsabilitate că produsele R100 la care se referă

această declaraţie sunt în conformitate cu Directivele Consiliului în ceea ce priveşte alinierea legislaţiilor

Statelor Membre ale CE, referitoare la:

– Compatibilitate electromagnetică (89/336/CEE).

Standarde aplicate: EN 61000-6-2 şi EN 61000-6-3.

Декларация за съответствие

Ние, фирма Grundfos заявяваме с пълна отговорност, че продуктите R100, за които се отнася

настоящата декларация, отговарят на следните указания на Съвета за уеднаквяване на правните

разпоредби на държавите членки на ЕО:

– Електромагнетична поносимост (89/336/EИO).

Приложени норми: EN 61000-6-2 и EN 61000-6-3.

Prohlášení o konformitě

My firma Grundfos prohlašujeme na svou plnou odpovědnost, že výrobek R100 na nějž se toto

prohlášení vztahuje, je v souladu s ustanoveními směrnice Rady pro sblížení právních předpisů

členských států Evropského společenství v oblastech:

– elektromagnetická kompatibilita (89/336/EWG),

použité normy: EN 61000-6-2 a EN 61000-6-3.

Prehlásenie o konformite

My firma Grundfos, na svoju plnú zodpovednost’ prehlasujeme, že výrobok R100, na ktorý sa toto

prehlásenie vzt’ahuje, je v súlade s nasledovnými smernicami Rady pre zblíženie právnych predpisov

členských zemí Európskej únie:

– Elektromagnetická kompatibilita (89/336/EWG),

Použité normy: EN 61000-6-2 a EN 61000-6-3.

Uygunluk Bildirgesi

Biz Grundfos olarak, bu beyanda belirtilen R100 ürününün,

– Elektromanyetik uyumluluk (89/336/EEC).

Kullanılan standartlar: EN 61000-6-2 ve EN 61000-6-3.

ile ilgili olarak Avrupa topluluğu'na Üye Devletlerin yasalarında yer alan Belediye Yönetmeliklerine uygun

oldugunu, tüm sorumluluğu bize ait olmak üzere beyan ederiz.

Vastavuse deklaratsioon

Meie, Grundfos, deklareerime enda ainuvastutusel, et toode R100, mille kohta käesolev juhend käib, on

vastavuses EL nõukogu Direktiividega EMÜ liikmesriikide seaduste ühitamise kohta, mis käsitlevad:

– Elektromagnetilist ühilduvust (89/336/EEC).

Kasutatud standardid: EN 61000-6-2 ja EN 61000-6-3.

Atitikties deklaracija

Mes, Grundfos, su visa atsakomybe pareiškiame, kad gaminys R100, kuriam skirta ši deklaracija,

atitinka Tarybos Direktyvas dėl Europos Ekonominės Bendrijos šalių narių įstatymų suderinimo šiose

srityse:

– Elektromagnetinis suderinamumas (89/336/EEC).

Naudojami standartai: EN 61000-6-2 ir EN 61000-6-3.

Paziņojums par atbilstību prasībām

Sabiedrība Grundfos ar pilnu atbildību dara zināmu, ka izstrādājums R100, uz kuru attiecas šis

paziņojums, atbilst šādām Padomes direktīvām par tuvināšanos EK dalībvalstu likumdošanas normām:

– Elektromagnētiskā savienojamība (89/336/EEK).

Piemērotie standarti: EN 61000-6-2 un EN 61000-6-3.

Свідчення про відповідність вимогам

Ми, фірма Grundfos, із усією відповідальністю заявляємо, що вироби R100 до яких і відноситься

дане свідоцтво відповідають вимогам наступних указівок Ради ЄЕС про уніфікацію законодавчих

розпоряджень країн-членів ЄЕС:

– Електромагнітна сумісність (89/336/EEC).

Стандарти, що застосовувалися: Євростандарт EN 61000-6-2 і EN 61000-6-3.

Bjerringbro, 1st March 2007

Jan Strandgaard

Technical Director

R100

Installation and operating instructions 8

Montage- und Betriebsanleitung 18

Notice d'installation et d'entretien 29

Istruzioni di installazione e funzionamento 40

Instrucciones de instalación y funcionamiento 50

Instruções de instalação e funcionamento 61

Οδηγίες εγκατάστασης και λειτουργίας 72

Installatie- en bedieningsinstructies 83

Monterings- och driftsinstruktion 94

Asennus- ja käyttöohjeet 104

Monterings- og driftsinstruktion 114

Instrukcja montażu i eksploatacji 124

Руководство по монтажу и эксплуатации 134

Szerelési és üzemeltetési utasítás 145

Navodila za montažo in obratovanje 155

Montažne i pogonske upute 166

Uputstvo za montažu i upotrebu 177

Instrucţiuni de instalare şi utilizare 187

Упътване за монтаж и експлоатация 197

Montážní a provozní návod 208

Návod na montáž a prevádzku 219

Montaj ve kullanım kılavuzu 230

Paigaldus- ja kasutusjuhend 242

Įrengimo ir naudojimo instrukcija 252

Uzstādīšanas un ekspluatācijas instrukcija 263

Інструкції з монтажу та експлуатації 274

CONTENTS

Page

1. General description 8

1.1 Switching on the R100 10

1.2 Switching off the R100 10

2. Setting the R100 10

2.1 Language 11

2.2 Real-time setting 11

2.3 Name and address 11

2.4 Character editor 12

3. Starting the communication 12

4. Menu structure 13

4.1 Menu GENERAL 14

4.2 File structure 15

5. USB connection 16

5.1 Programming the R100 16

5.2 Upgrading of the R100 application software 16

6. Technical data 17

7. Disposal 17

1. General description

The Grundfos R100 remote control is designed for wireless IR communica-

tion with Grundfos products.

The functions available depend on the product with which the R100

communicates. See installation and operating instructions for the product in

question.

Read these operating instructions before using the R100 remote

control.

Fig. 1 R100 remote control

TM02 4710 1502

Buttons Description

and

Used to navigate in a menu and to change values in

a display.

Only values in framed setting fields can be changed.

and Steps from one menu to the other.

and Moves one display forwards or backwards.

Accepts the entered value or function, resets fault indica-

tions, exchanges data between the R100 and the product.

R 100

1.1 Switching on the R100

Press to switch on the R100.

Press and the entry display will appear.

Light and contrast in display

In all displays, the light can be switched on or off by simultaneously pressing

and any of the arrow buttons.

If the buttons are not pressed for 2 minutes, the light in the R100 is automat-

ically switched off.

The display contrast can be adjusted by simultaneously pressing and

or .

1.2 Switching off the R100

Press and simultaneously to switch off the R100.

If the buttons are not pressed for 5 minutes, the R100 is automatically

switched off.

2. Setting the R100

Settings to be made:

• Language

• Real-time setting

• Name and address.

Communication

Contrast

Setting

Light

2.1 Language

The R100 has been factory-preset to show texts and data in English.

The user can select any of the supported languages.

If US English is selected, the units of the displayed data will change as

follows:

2.2 Real-time setting

In this display, the real time can be entered.

This entry is only of importance for the function Store status data where

the information will appear in the generated file.

2.3 Name and address

In this display, the name and address can be entered.

This entry is only of importance for the function Store status data where

the information will appear in the generated file.

Measurement

Unit

SI US

Flow [m

/h] [US gpm]

Head [m] [ft]

Temperature [°C] [°F]

Specific energy consumption [Wh/m

] [Wh/kgal]

2.4 Character editor

2.4.1 Tool line

2.4.2 Character list

1. Use or to move one line forwards or backwards in the character list.

2. Use or to move the cursor to the desired character.

3. Accept the desired character with .

3. Starting the communication

Point the R100 at the product and select START with . A red indicator

light on the product will flash rapidly, indicating that communication takes

place.

Note: During the entire communication, the R100 must be pointed at the

product in question.

The data transmission time depends on the amount of data to be transferred,

which differs from product to product.

End of entry

Next text line

Previous text line

Move text cursor to the left

Move text cursor to the right

Delete backwards

Space

Character list

Text line number

Tool line

Text line

More than one product?

The R100 can only communicate with one product at a time. If the R100

comes into contact with more than one product, it is necessary to select a

product.

Possible solutions:

• Move the R100 closer to the product in question and press .

• Hide the line of sight to the product next to the desired product, for exam-

ple with your hand, and press .

If the product has already been given a unique number, you can select the

number of the product you want to communicate with.

4. Menu structure

Each product has a specific menu structure.

The functions in the GENERAL menu are common to all products. The main

functions are described on the next pages.

The displays relating to the individual product are described in detail in

the installation and operating instructions for the product in question.

Setting field

The current/last transferred value will appear as light-coloured text on a dark

background.

When values are changed, the text will be dark-coloured on a light back-

ground.

When has been pressed and the new data have been transferred to

the product, the text will again be light-coloured.

Continuous display of status values

When is pressed continuously in a display under OPERATION or

STATUS, the displayed value is being updated continuously.

4.1 Menu GENERAL

4.1.1 Return to start

4.1.2 Delete all changes

4.1.3 Store settings

4.1.4 Call up settings

Options:

• DELETE: Deletes the selected setting file. A warning appears in the

display.

• USE: Transfers the selected setting file to the product in question

(point at the product).

• RENAME: Renames the selected setting file. The character editor

appears.

• CANCEL: Cancels the operation.

4.1.5 Store status data

Returns to start.

The R100 can now communicate with another product.

Changes the product back to the original setting,

i.e. before communication was started.

Stores the product settings in the R100. The settings

will remain stored as a file (*.set) even if the R100 is

switched off.

Can be used to transfer the factory presetting or stored

product settings in the R100 to the product you com-

municate with.

When is pressed, a file (*.txt) is generated.

4.1.6 Call up status data

Options:

• DELETE: Deletes the selected status data file. A warning appears in the

display.

• RENAME: Renames the selected status data file. The character editor

appears.

• CANCEL: Cancels the operation.

4.2 File structure

When the R100 is connected to a PC, it will be displayed as "Removable

Disk".

The folder structure is shown in fig. 2. For PC connection via USB connec-

tion, see fig. 3.

Fig. 2 Folder structure

Each of the main folders contains the product folders: CU 3, CU 300,

CU 301, E-pump, IO 351, MAGNA, MGE, MP 204, Multi-E, UPE, UPS.

Each of the product folders contains the R100 auto-generated files.

Note: The service folder SERVDATA is displayed, but cannot be changed.

Accesses the data files generated by Store status

data.

5. USB connection

The USB connection is used for

• transfer of updated application program from a PC to the R100

• transfer of status data files (type *.txt) and setting files (type *.set) from

the R100 to the PC.

When the status data files have been transferred to the PC via the USB con-

nection, the data can be displayed, examined and organised by any text

processing software and be printed on any printer.

Fig. 3 Connection to PC via USB connection

5.1 Programming the R100

If "Unknown product" appears in the R100 display during communication

with a product, the R100 must be upgraded with a new application software

version. To get the new software, please contact Grundfos.

5.2 Upgrading of the R100 application software

1. Switch off the R100.

2. Connect the R100 to the PC via the USB cable.

3. Press all four arrow buttons and simultaneously. The R100 will then

be switched on and open in "Programming mode" showing the message

"USB link established". In a Windows browser, it will appear as

"Removable Disk" and the application program file (type *.mk2) will

appear.

4. Delete the application program file. "Device busy" appears in the R100

display during the deletion, which takes 30 seconds. After the deletion,

"USB link established" appears in the R100 display.

5. Copy the new application program file to "Removable Disk". "Device

busy" appears in the R100 display during the file transfer, which takes

approximately 50 seconds. After the file transfer, "Device safe to remove"

appears in the R100 display.

6. Perform a safe removal of the R100 USB connection.

The R100 display will show "Application program download complete".

This will take 5 to 10 seconds. The update procedure has now been

successfully completed.

Type A

Type B

mini

USB

7. Press and simultaneously to switch off the R100.

8. Switch on the R100. After start-up, the R100 updates its file structure for

the new application software. This takes approximately 45 seconds.

"Updated successfully" appears in the display.

6. Technical data

Ambient temperature

–10°C to +50°C during operation.

–20°C to +60°C during storage.

Relative air humidity

Maximum 95%.

Voltage supply

2 batteries, 1.5 V, type AA.

Enclosure class

IP 40.

IR communication

Reach: Minimum 3 metres.

Transmission angle: ±12°.

Batteries

During battery replacement, the R100 will store its settings (Language, Real-

time setting, Name and address, display contrast) for at least 10 minutes.

Low-battery indicator.

7. Disposal

This product or parts of it must be disposed of in an environmentally sound

way:

1. Use the public or private waste collection service.

2. If this is not possible, contact the nearest Grundfos company or service

workshop.

Subject to alterations.

285

286

1. OPERATION0. GENERAL

GRUNDFOS MAGNA is shown as an example.

287

3. INSTALLATION2. STATUS

Pagina se încarcă...

Grundfos R100 Installation And Operating Istructions

Marca: Grundfos

Model: R100

Tip: Installation And Operating Istructions

Descărcați PDF

raport

în alte limbi

English: Grundfos R100
italiano: Grundfos R100

Lucrări înrudite

Alte documente

Roland UM-ONE MK2 Manualul proprietarului