Landxcape LX791 Manualul proprietarului

Categorie
Cositoare
Tip
Manualul proprietarului

Acest manual este potrivit și pentru

LX790 LX791
LX792 LX793
P09
P22
P37
P51
P64
P78
P91
P105
P119
P131
P144
P158
P172
P185
EN
D
F
I
ES
NL
PL
HU
RO
CZ
SK
PT
TR
SL
Owner’s Manual
Benutzerhandbuch
Mode d’emploi
Manuale d’uso
Manual del propietario
Gebruikershandleiding

Felhasználói kézikönyv
Manual utilizator


Manual de utilizador

Navodila za uporabo
Original instructions EN
Originalbetriebsanleitung D
Notice originale F
Istruzioni originali I
Manual original ES
Oorspronkelijke gebruiksaanwijzing NL
Instrukcja oryginalna PL
Eredeti használati utasítás HU
 RO
 CZ
 SK
Manual original PT
 TR
 SL
127 8
21
20
9 10
11
12
13
14
15
16
17
18 19
22 23 24
3 4
6
5
A
C
B
DD
E1
E2 F
G
H
K2
K1
K3
1
2
L
I
J
M
N
O1
O2
P
Q1
Q3
Q5Q4
Q2
1
2 2
EN 9
1. Product Safety
1.1 General & Additional Safety Instruction
WARNING: Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Carefully read the instructions for the safe operation of the
machine.
Save all warnings and instructions for future reference.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with
the appliance.
The appliance is only to be used with the power supply unit
provided with the appliance.
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
SAFE OPERATION PRACTICES
Training
a) Read the instructions carefully. Make sure you understand the
instructions and be familiar with the controls and the proper use of
the appliance;
b) Never allow people unfamiliar with these instructions or children
to use the appliance. Local regulations can restrict the age of the
operator;
c) The operator or user is responsible for accidents or hazards
occurring to other people or their property.
Preparation
a) Ensure the correct installation of the boundary wire as instructed.
b) Periodically inspect the area where the appliance is to be used and
remove all stones, sticks, wires, bones, and other foreign objects.
c) Periodically visually inspect to see that the blades, blade bolts
and cutter assembly are not worn or damaged. Replace worn or
damaged blades and bolts in sets to preserve balance.
d) On multi-spindle appliances, take care as rotating one blade can
cause other blades to rotate.
e) WARNING! The lawnmower shall not be operated without the guard
in place.
OPERATION
1. GENERAL
a) Never operate the appliance with defective guards, or without
safety devices, for example deflectors, in place.
b) Do not put hands or feet near or under rotating parts. Keep clear of
the discharge opening at all times.
c) Never pick up or carry an appliance while the motor is running.
d) Operate the disabling device from the appliance.
- Before clearing a blockage;
- Before checking, cleaning or working on the appliance.
e) It is not permitted to modify the original design of robotic
lawnmower. All modifications are made at your own risk.
f) Start robotic lawnmower according to the instructions. When the
power key is switched on, make sure you keep your hands and
feet away from the rotating blades. Never put your hands and feet
under the mower.
g) Never lift up robotic lawnmower or carry it when the power key is
switched on.
h) Do not let persons who do not know how robotic lawnmower
works and behaves use the mower.
i) Do not put anything on top of robotic lawnmower or its charging
station.
j) Do not allow robotic lawnmower to be used with a defective blade
disc or body. Neither should it be used with defective blades,
screws, nuts or cables.
k) Always switch off robotic lawnmower when you do not intend to
use the mower. Robotic lawnmower can only start when the power
key is switched on and the correct PIN code has been entered.
l) Keep your hands and feet away from the rotating blades. Never
place your hands or feet close to or under the body when robotic
lawnmower is in operation.
m) To avoid using the machine and its peripherals in bad weather
conditions especially when there is a risk of lightning.
n) Not to touch moving hazardous parts before these have come to a
complete stop.
o) For machines used in public areas, that warning signs shall be
placed around the working area of the machine. They shall show
the substance of the following text:
WARNING!
Automatic lawnmower! Keep away from the
machine! Supervise children!
2. ADDITIONALLY WHEN THE APPLIANCE IS OPERATING
AUTOMATICALLY
a) Do not leave the machine to operate unattended if you know that
there are pets, children or people in the vicinity.
MAINTENANCE AND STORAGE
When the mower is turned upside down the power key must
always be switched off.
The power key should be switched off during all work on the
mower’s underframe, such as cleaning or replacing the blades.
a) Keep all nuts, bolts and screws tight to be sure the appliance is in
safe working condition.
b) Inspect the robotic lawnmower each week and replace worn or
damaged parts for safety.
c) Check especially that the blades and blade disc are not damaged.
Replace all blades and screws at the same time if necessary so
that the rotating parts are balanced.
d) Ensure that only replacement cutting means of the right type are
used.
e) Ensure that batteries are charged using the correct charger
recommended by the manufacturer. Incorrect use may result in
electric shock, overheating or leakage of corrosive liquid from the
battery.
f) In the event of leakage of electrolyte flush with water/neutralizing
agent, seek medical help if it comes into contact with the eyes etc.
g) Servicing of the appliance should be according to manufacturers’
instructions.
Recommendation
To connect the machine and/or its peripherals only to a supply circuit
protected by a residual current device (RCD ) with a tripping current of
not more than 30 mA.
EN10
Residual risks
To avoid injuries, wear protective gloves when replacing the blades.
Transport
The original packaging should be used when transporting robotic
lawnmower over long distances.
To safely move from or within the working area:
a) Press the STOP button to stop the mower.
You select the four digit PIN code when you start the mower for the
first time.
b) Always switch off robotic lawnmower if you intend to carry the
mower.
c) Carry the mower by the handle at the front under the mower. Carry
the mower with the blade disc away from the body.
Safety Warnings for battery pack inside the tool
a) Do not dismantle, open or shred battery pack.
b) Do not short-circuit a battery pack. Do not store battery
packs haphazardly in a box or drawer where they may short-
circuit each other or be short-circuited by conductive
materials.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails, screws or
other small metal objects, that can make a connection from one
terminal to another. Shorting the battery terminals together may
cause burns or a fire.
 
direct sunlight.
d) Do not subject battery pack to mechanical shock.
e) In the event of battery leaking, do not allow the liquid to
come into contact with the skin or eyes. If contact has been
made, wash the affected area with copious amounts of water
and seek medical advice.
f) Seek medical advice immediately if a cell or battery pack
has been swallowed.
g) Keep battery pack clean and dry.
h) Battery pack gives its best performance when it is operated
at normal room temperature (20 °C ± 5 °C).
i) When disposing of battery packs, keep battery packs of
different electrochemical systems separate from each
other.
 
TM
.

for use with the equipment. A charger that is suitable for one

another battery pack.
k) Do not use any battery pack which is not designed for use
with the equipment.
l) Keep battery pack out of the reach of children.
m) Retain the original product literature for future reference.
n) Dispose of properly.
2. Information on the Landxcape
TM
WARNING - Robotic lawnmower can be dangerous if
incorrectly used.
Read through the Operator’s manual carefully and
understand the content before using your robotic
lawnmower.
WARNING - Keep a safe distance from the machine
when operating.
WARNING – Operate the disabling device before
working on or lifting the machine.
WARNING - Do not ride on the machine.
Do not burn
Do not expose to rain or water.
Do not dispose of batteries. Return exhausted
batteries to your local collection or recycling point.
Do not wash the machine with a high pressure
washer
Class III appliance
Waste electrical products must not be disposed of
with household waste. Please recycle where facilities
exist. Check with your local authorities or retailer for
recycling advice.
EN 11
1. STOP BUTTON
2. CUTTING HEIGHT ADJUSTMENT KNOB
3. ON/OFF KEY
4. START KEY
5. HOME BUTTON
6. DISPLAY
7. CHARGING STRIPS
8. RAIN SENSOR
9. FRONT WHEEL
10. BLADE TURNING DISC
11. CUTTING BLADE
12. BATTERY PACK
13. USB PORT
14. REAR DRIVING WHEEL
15. HANDLE
16. CONTACT PINS
17. CHARGING BASE
18. POWER ADAPTER
19. WIRE PEGS
20. BOUNDARY WIRE
21. CHARGING BASE FIXING NAILS
22. BOUNDARY WIRE DISTANCE GAUGE
23. HEX KEY
24. CONNECTOR
Not all the accessories illustrated or described are included in standard delivery.
2. Component List
EN12
3. Technical data and noise data
3.1 Technical data
Type LX790 LX791 LX792 LX793 (790-799 - designation of
machinery, representative of Robotic Lawn mower)
LX790 LX792 LX791 LX793
Rated voltage 20V
Max.*
No load speed 2800/min
Cutting area 600m
2
900m
2
Cutting diameter 16cm 18cm
Cutting height 30-60mm
Cutting height positions 4
Battery type Lithium-ion
Battery model LA0001 LA0002
Charging time approx. 1.3hrs 2hrs
Charger model LA8001 / LA8002
Charger rating
Input: 100-240V~50/60Hz, 38W,
Output: 20V
, 1.5A
Machinery weight 8.4kg
Protection degree III
*Voltage measured at no load. Initial battery voltage reaches maximum
of 20 volts. Nominal voltage is 18 volts.
Accessories
LX790 LX792 LX791 LX793
Screw 9 9
Charging base 1 1
Charging base fixing nails 7 7
Boundary wire 150m 180m
Wire pegs 210 250
Hex key 1 1
Boundary wire distance gauge 2 2
Blade 9 9
Connector 2 2
Battery pack (LA0001/ LA0002) 1 1
Charger (LA8001 / LA8002) 1 1
We recommend that you purchase genuine accessories listed in the
above list from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store personnel can assist you
and offer advice.
3.2
Noise data
A weighted sound pressure L
pA
= 44.2dB (A), K
PA
= 0.4dB(A)
A weighted sound power
L
wA
= 64.2dB (A) K
wA
= 0.4dB(A)
Wear ear protection when
sound pressure is over
80dB(A)
A degree of noise from the machine is not avoidable. Route noisy work
is to be licensed and limits for certain periods. Keep rest periods and
they may need to restrict the working hours to a minimum. For their
personal protection and protection of people working nearby, an ap-
propriate hearing protection shall be worn.
Intended Use
The garden product is intended for domestic lawn mowing. It is de-
signed to mow often, maintaining a healthier and better looking lawn
than ever before. Depending on the size of your lawn, your Landxcape
TM
may be programmed to operate at any time or frequency. It is impos-
sible for digging, sweeping or snow cleaning.
EN 13
4. Control panel
Start
1) After the boundary wire installation, you can start using Landxcape
TM
(Please refer to Installation Guide for boundary wire installation).
2) Press
until Landxcape
TM
turns on. For the first use, input the default PIN code 0000 by pressing for four times when the number 0 is
blinking. (The PIN code can be changed, please refer to “Setting” in the Installation Guide).
NOTE:
Landxcape
TM
will turn off if it does not receive any input within 30 seconds after it is turned on. If you enter wrong PIN code three times,
Landxcape
TM
will raise the alarm “di-di” and then turn off.
3) Press
, then press to start mowing.
4) Press then to make Landxcape
TM
go to the charging base, with the blades rotating to cut grass on the way home.
Landxcape
TM
will work continuously until reaching low battery power level and then it will return to the charging base. Once charging is complete,
Landxcape
TM
will automatically resume mowing or it stay in the charging base according to the mowing schedule.
NOTE:
When Landxcape
TM
turns on, all lights on the display will be illuminated and then turn off. Check if there is any light damaged. It is
recommended to shield the display with your hand when the outdoor light gets too strong.
POWER ON/OFF
Turns Landxcape
TM
on
and off
LOCK
BATTERY CAPACITY
Working time
START
Starts mowing/
Selects up
STANDBY PAGE:
Landxcape
TM
is not in the
working hours.
SLEEP PAGE:
Landxcape
TM
is fully charged and is
not in the working hours.
DISPLAY
Displays the state of your setting
STOP
Stops Landxcape
TM
during
operation
HOME
Sends Landxcape to its
charging base during
operation with the blades
rotating to cut grass
on the way home and
activates charging/Selects
down
OK
Confirms any setting
EN14
5. Understanding Your Landxcape
TM
Congratulations on your new purchase of Landxcape
TM
and welcome
to the care-free life of automatic mowing. In the following, we want to
help you to better understand how your Landxcape
TM
thinks.
5.1 How does my Landxcape
TM
know what
to mow?
Landxcape
TM
chooses its direction at random. It will make sure your
entire lawn is evenly mowed without leaving unattractive mowing paths
(See Fig. A).
5.2 How does my Landxcape
TM
know where
to go?
Your Landxcape
TM
is made to work on its own. Landxcape
TM
knows
when it needs to go to its charging base to charge, can sense when it is
raining, can stop itself if it senses a problem, and knows to stop, draw
back, and turn around when it bumps into something blocking its path.
Landxcape
TM
will also automatically stop its blade turning disc from
rotating if it is lifted off the ground to prevent an accident.
A. Finding the Charging Base
When your Landxcape
TM
needs to recharge, it will stop mowing and
follow the boundary wire in an anti-clockwise direction back to its
charging base. Landxcape
TM
is pre-programmed to mow the grass near
the boundary wire twice a week. By default, Landxcape
TM
will mow near
the boundary wire every Monday and Friday after it is powered on.
B. Rain sensors
Landxcape
TM
is equipped with a rain sensor which detects rain and tells
Landxcape
TM
to stop mowing and follow the boundary wire back to its
charging base (See Fig. B).
Landxcape
TM
will resume mowing after passing the delay time. The
default delay time is 180mins.
When the rain sensors are wet,
Landxcape
TM
returns to its charging
base. When the rain sensors are dry,
Landxcape
TM
will begin the delay
time countdown. If you want to exit from the rain delay, dry the sensor
area, and perform a power cycle by operating the on/off key. After the
power cycle has been performed, you can operate again.
C. Sensing the boundary wire
Landxcape
TM
always obeys the border set by the boundary wire and
uses sensors at its front to detect it. (See Fig. C)
D. Starting and stopping while mowing (See Fig. D, E1, E2)
To start mowing, press the on/off key and input the PIN code. Press
, then press . If you would like
Landxcape
TM
to stop mowing, simply
press the STOP button on top of the mower.
If
Landxcape
TM
senses something is wrong, it will display a fault message
on the display. For information on these messages, refer to the Error
Messages.
Landxcape
TM
will turn off if it does not receive any input from
the user within 20 minutes.
To resume:
• Press , then press
Now Landxcape
TM
will begin to mow!
5.3 Setting
First please set the height to a desired grass level after cut and you can
do the program setting manually.
NOTE: When doing the program setting manually, Landxcape
TM
will
enter the standby page if it does not receive any input from the user
within 30 seconds.
(1) Change PIN code
To change the PIN code, keep pressing both
and buttons at the
same time for 5 seconds. The icon will be blinking, and will
be rolling flashing. After that, the first number will be blinking, use or
to select the number you want and press to confirm. The next
number will be blinking. Use the same method to complete other numbers.
For example, the new PIN code is set to be 0326. After that,
will be rolling flashing and the first number will be blinking again. Use the
same method to input the new PIN code you set just now (in this example,
). Then “ will be rolling flashing on the display.
Your PIN code has been changed successfully.
Only for reference
(2) Set year, date and time
Set year, date and time are compulsory setting items. If you don’t set these
items, it will influence the schedule time in the following setting. These
items should be set in the order of year, date and time. For the year setting,
keep pressing
for 3 seconds until the icon and a number are
blinking on the display, for example, . Use or to select
the year you want. Then press to confirm to finish the year setting.
Only for reference
EN 15
Meanwhile, the icon
will be flashing again and a number will be
displayed to indicate the date, for example, , meaning September
29. When is flashing, use or to select the number and press
to confirm. Then will be flashing. Use the same method to select
the number and press to confirm to finish the date setting.
Only for reference
Meanwhile, the icon
will be flashing and the time will be displayed,
for example, . When is blinking, use or to to select
the number and press to confirm. Then will be blinking, use the
same method to select the number and press to confirm. Now the
time setting is completed and Landxcape
TM
will enter the standby page.
Only for reference
(3) Set work area
Keep pressing
for 3 seconds. When the icon is blinking, press
. A number will be blinking on the display, for example, , which
is the lawn area. The working time will be automatically set according to
the size of your garden. Use or to set the lawn area (the area will
increase / decrease by 50m
2
each time the / is pressed), and
press to confirm. Then Landxcape
TM
will enter the standby page.
Only for reference
(4) Change default start time
The default start time of 9:00 can be changed to anytime by keep pressing
both
and buttons at the same time until a ding sound is heard.
For example, keep pressing both and buttons at 14:05, and
your Landxcape
TM
will start mowing from 14:05.
Only for reference
5.4 How efficiently will my Landxcape
TM
mow the grass?
Mowing times are different for every lawn depending on the factors
mentioned below. Gradually adjust the time you allow Landxcape
TM
to
mow each day until you find the most suitable setting.
Your Landxcape
TM
is capable of mowing areas of different sizes,
although this depends on various factors, such as:
Species of grass in your lawn and its growth rate
Sharpness of the cutting blades
• Humidity
Surrounding temperature
Amount of obstacles in your Lawn
Unlike most other mowers,
Landxcape
TM
uses a side charging system,
which is able to cut the surrounding grass as much as possible. The holes
on the bottom of the charging base allow the grass to grow through the
base to help disguise it and create an elegant appearance.
Landxcape
TM
s cutting height can be adjusted between 3cm-6cm. Before
starting your Landxcape
TM
for the first time, you should cut the grass to
the height no more than 9 cm with your manual lawnmower. Then, set the
cutting height of your Landxcape
TM
to its maximum setting (6cm) for its
first time mowing. (See Fig. F)
Your Landxcape
TM
will cut best in dry weather. Wet grass can build up
on the blade turning disc and within the motor, and can also cause
loose traction and slippage while working.Your Landxcape
TM
is afraid of
lightning storms. In case of a lightning storm, protect Landxcape
TM
by
unplugging the charging base, disconnecting the boundary wire, and
making sure Landxcape
TM
is not allowed to charge.
Your Landxcape
TM
loves mowing grass and requires the cutting blades
to be kept in good condition to cut at its best. Landxcape
TM
can do most
things by itself, but will sometimes need your help to prevent damage
to itself.
Never let Landxcape
TM
travel over gravel.
Remove or prevent access to obstacles that Landxcape
TM
could
accidentally climb on and damage its blade turning disc.
Remove all debris and foreign objects from your lawn.
6. Boundary Wire Basics
6.1. Pegging the Boundary Wire
Use the boundary wire distance gauge to set the correct distance
between the wire and the border of your lawn (more than 26cm).This
is the recommended distance. The provided distance gauge ensures
proper installation.
If your neighbor also uses a Landxcape
TM
, keep a spacing of at least 1
metre between your boundary wire and your neighbor’s.
The boundary wire must outline the intended mowing area
EN16
exactly.
Your Landxcape
TM
will become confused by extra bends or
coils of boundary wire that are not part of its mowing area (See Fig.
G). If there is excess boundary wire after the mowing area has been
outlined, cut it off and store this additional wire in a separate location.
It is important to leave the necessary length where it connects to the
charging base so it can be connected and still remain buried.
6.2 Burying the Boundary Wire
If you are planning to bury the boundary wire, it is recommended to first
peg it down. This allows you to easily change the layout if necessary before
burying the wire. When the boundary wire installation is complete, have
Landxcape
TM
follow and check the path by pressing and . This
allows your
Landxcape
TM
to adjust to its new environment. .
While observing
Landxcape
TM
you can easily make alterations to the
boundary wire to ensure
Landxcape
TM
's trouble-free tracking when locating
the charging station. Confirm that
Landxcape
TM
docks in the charging
station successfully, and bury the wire if desired.
6.3 Joining the boundary wire
If you want to extend and splice the boundary wire, use a connector.
The connector is waterproof and provides optimal connection.
Insert both wire ends in any two of the three holes of the connector.
Insert the wires fully until both wire ends are visible on the other side of
the connector. (See Fig. H) Press the connector together by using a pair
of pliers. (See Fig. I, J)
WARNING!
It is not recommended to simply splice the boundary
wire with insulating tape or use a screw terminal block for
connection. A broken circuit may occur after a period of time as soil
moisture can oxidize the wire.
7. Software update
The software can be updated when new versions become available.
The latest software can be downloaded from our website
www.landxcape-robotics.com.
Update via USB. See below for download and installation instructions:
(1) Locate the latest software version at: www.landxcape-robotics.
com. Save the file to an empty
FAT32
formatted USB (flash drive).
Delete any other files on the drive and check the format. If the drive
is not formatted in
FAT32
, please reformat the drive.
NOTE:
the software update is downloaded as a zipped file. You will
need to unzip or extract it before proceeding.
(2) Place Landxcape
TM
on a secure and level surface. Press
to turn
off your Landxcape
TM
.
(3) Insert the USB drive (flash drive) in the port. (See Fig. K1)
(4) Turn Landxcape
TM
on. The update will begin automatically. Wait until
the display shows “ (See Fig. K2), then remove the USB drive
(flash drive) and tightly close the protective cover. When the display
shows “ ”, the update is complete and Landxcape
TM
will enter
the PIN page.
The manual included with your Landxcape
TM
is based on the default
software at the time of production. Some new features/functions in the
new version may not exist in the manual. If you found some settings not
in the manual, please visit www.landxcape-robotics.com to download
the latest manual.
8. Maintenance
Your Landxcape
TM
works hard and needs to be cleaned and checked
from time to time. Some parts will require replacement as they become
worn. Never use your Landxcape
TM
with defective main switch.
Switch off the machine before carrying out any service or maintenance.
Here's how to take care of your Landxcape
TM
.
8.1 Keep it sharp
WARNING: Before cleaning, adjusting, or replacing the
blades, turn your Landxcape
TM
OFF and put on protective
gloves.
WARNING: When fitting new blades, make sure you
replace ALL the blades. Always use new screws when
fitting blades. This is important to ensure blade retention and
balance the blade turning disc. Failure to use new screws could
cause serious injury.
Landxcape
TM
does not cut grass like other mowers. Its cutting blades
are razor sharp on 2 edges and rotate in both directions for maximum
cutting capacity (See Fig. L). Each blade of your
Landxcape
TM
has 2
cutting edges. The blade turning disc will make forward and reverse
rotation at random to use both cutting edges and minimize the
frequency of replacing the blades. Each cutting blade will last up to
2 months when it is programmed to mow everyday. Always check to
see if the blades are chipped or damaged and replace them if they
are. When the cutting blades are dull and worn out, they should be
replaced with the spare blades provided with your
Landxcape
TM
. Spare
blades are also available at your nearest
Landxcape
TM
retailer.
A. Replace the Blades
After some time, usually every season, your Landxcape
TM
s Blades
will need to be replaced. When replacing the blades, make sure to
replace ALL of them at the same time. You can replace them with one
of the spare blade kits and extra blade screws supplied with your
Landxcape
TM
.
Before attempting to replace your Landxcape
TM
s blades, turn the
power off and put on protective gloves and follow these steps:
1. Gently flip Landxcape
TM
over.
2. Remove the battery cover and remove the battery.
3. Take the screws off the blades with a screwdriver. (See Fig. M)
4. Firmly screw on the new blades.
5. Refit the battery and the battery cover.
IMPORTANT: After screwing the blade to the blade disc, make
sure the blade is able to spin freely.
8.2 Keep it clean
WARNING:
Before cleaning, turn your Landxcape
TM
OFF.
Put on protective gloves before cleaning the blade
turning disc and do not rinse or flush with water.
A. Cleaning the body
Your Landxcape
TM
will live a much happier and longer life if it is
cleaned regularly. Although, since your Landxcape
TM
is an electric
machine, you will need to take care when cleaning.
DO NOT use a
hose, high pressure washers and do not pour running water on
your Landxcape
TM
.
It is best to use a spray bottle filled with water.
When cleaning the machine body, use a soft brush or clean cloth and
avoid using solvents or polishes (See Fig. N). Lastly, remove all build
up of grass clippings and debris.
B. Cleaning the Underside
Again, it is important that you power Landxcape
TM
OFF and
wear
EN 17
protective gloves before touching the blade turning disc
.
First, flip your Landxcape
TM
upside down to expose its underside. Here
you will see the blade disc, the chassis, and the front wheel and driving
wheels. Clean everything thoroughly with a soft brush or moist rag.
WARNING:
NEVER clean the underside of Landxcape
TM
with
running water. Component damage can occur. (See Fig. O1,
O2)
Rotate the blade disc to ensure it rotates freely. Check the blades spin
freely around the fixing screws. Remove any obstructions.
IMPORTANT:
Remove any lodged debris so that it does not cause
a crack in the blade disc. Even the tiniest crack can decrease
your Landxcape
TM
's mowing output.
C. Clean the contact pins and the charging strips
Clean the contact pins located on the charging base and the charging
strips located on Landxcape
TM
using a cloth. Remove any built up
grass clippings or debris around the contact pins and charge strips
periodically to ensure Landxcape
TM
successfully charges each time.
8.3 Battery life
The heart of Landxcape
TM
is its 20V Li-Ion battery. For proper storage of
the battery, make sure it is fully charged and kept in a cool dry place.
NOTE:
The recommended Landxcape
TM
operation temperature is
between 0-55
0
C.
The life-span of Landxcape
TM
s battery depends on various factors,
such as:
The length of the mowing season in your region
Amount of hours Landxcape
TM
mows per day
Battery maintenance during storage
Landxcape
TM
can be charged manually without the boundary
wire.
1. Connect the charging base to a suitable power supply. The
green light on the charging base will turn on.
2. Manually dock Landxcape
TM
into the charging base while
Landxcape
TM
is powered off. (See Fig. P)
3. The green light on the charging base will be flashing.
Landxcape
TM
will begin to charge.
8.4 Winter hibernation
Your Landxcape
TM
will live longer and healthier if it is allowed to
hibernate. So even though it is troublesome, we recommend storing
your Landxcape
TM
in your shed or garage during the winter.
Before you prepare your Landxcape
TM
for winter hibernation, we
recommend you:
Thoroughly clean your Landxcape
TM
Fully charge the battery and remove it from Landxcape
TM
Turn power off
To maximize the battery life, fully charge the battery and remove it from
Landxcape
TM
before storage during winter.
WARNING: Protect the underside of Landxcape
TM
from
water. NEVER store Landxcape
TM
upside down outdoors.
The boundary wire can be left in the ground but its ends should be
protected, such as placed in a tin can with grease. If the charging base
is left outside for the winter, leave the boundary wire connected.
NOTE:
When bringing Landxcape
TM
back to work after winter
hibernation, make sure the charging strips and contact pins are clean.
We recommend using a fine grade emery cloth to clean the contacts.
8.5 Replacing the battery
WARNING: Power off before attempting any adjustment,
replacement or repair.
Before replacing the blades, turn your Landxcape
TM
OFF and put on
protective gloves.
If you need to replace the battery, follow these steps:
1. Gently turn your Landxcape
TM
upside down.
2. Remove the screws on the battery cover. Remove the battery cover.
(See Fig. Q1)
3. Lift out the old battery carefully. Press the latch and release the
connectors. (See Fig. Q2)
NOTE:
Do not pull by the cables. Hold the connectors and release the
latch.
4. Connect a new original battery by attaching the connectors until
they click into position. (See Fig. Q3, Q4)
5. Fit the battery as shown. (See Fig. Q5) Place the cover back in its
position and tighten the screws.
EN18
9. Function Messages
Display Message Action
Rain delay activated. No action is required.
10. Error Messages
Display Cause Action
Landxcape
TM
is outside
working area.
1. If
Landxcape
TM
is actually outside its territory: turn
Landxcape
TM
off, take
Landxcape
TM
inside its territory. Turn
Landxcape
TM
on. Press then .
2. If
Landxcape
TM
is inside its territory, check if the LED on the charging base is green. If not,
verify that the charging base is properly connected to the charger and that the charger is
connected to a suitable power supply. If they are properly connected, the boundary wires are
clamped incorrectly and must be reversed.
3. If the LED light on the charging base turns on red, confirm that the boundary wire is well
connected to the clamps on the charging base. If the problem persists, check that the boundary
wire hasn’t been cut.
Wheel motor blocked
1. Turn Landxcape
TM
off; take Landxcape
TM
to an area free of obstacles.
2. Turn Landxcape
TM
on. Press then .
3. If the error message is still displayed, turn power off; turn Landxcape
TM
upside-down and
check if there’s anything preventing the wheels from rotating.
4. Remove any obstruction, turn Landxcape
TM
upright, turn power on. Press then .
Blade disc blocked
1. Turn Landxcape
TM
off.
2. Turn Landxcape
TM
upside down and check if there’s anything preventing the blade disc to
rotate.
3. Remove any obstruction.
4. Turn Landxcape
TM
upright and take it to an area with short grass or adjust the cutting
height;
5. Turn Landxcape
TM
on. Press then .
Landxcape
TM
is trapped.
1. Turn Landxcape
TM
off;
2. Take Landxcape
TM
to an area in your lawn free of obstacles obstacles.
3. Turn Landxcape
TM
on. Press
then .
4. If the error message is still displayed; turn power off; turn Landxcape
TM
upside-down.
Check if there is anything preventing the wheels from rotating.
5. Remove any obstruction, turn Landxcape
TM
upright, turn power on. Press
then .
Landxcape
TM
is lifted up.
1. Turn Landxcape
TM
off.
2. Take Landxcape
TM
to a lawn area clear of obstacles, turn Landxcape
TM
on. Press
then .
3. If the error message is still displayed: turn Landxcape
TM
off, turn Landxcape
TM
upside-
down and check if there’s anything preventing the front wheels from rotating.
4. Remove any possible object, turn Landxcape
TM
upright, turn Landxcape
TM
on. Press
then .
Landxcape
TM
is upside
down.
Turn Landxcape
TM
upright. Press then .
Battery error
1. Check the battery temperature. If the temperature is too high, wait until the
temperature has cooled down. Press then .
2. If the error message is still displayed, replace a new battery. Restart Landxcape
TM
.
Press then .
3. If the error repeatedly occurs, try to change the working schedule.
EN 19
It takes too long for
Landxcape
TM
to go back to
the charging base.
Manually dock Landxcape
TM
in the charging base for charging. After Landxcape
TM
is
fully charged, Press then .
Error unknown.
Restart Landxcape
TM
. Press then . If the error message is still displayed,
contact a service agent for help.
NOTES
Before turning power on, always return Landxcape
TM
to its territory. If not,
will be displayed. This message is also displayed when
Landxcape
TM
is sitting over the boundary wire when turned on.
If for any reason—i.e. a party, children playing...—you want to park your Landxcape
TM
in the charging base: Press then . Landxcape
TM
will go to its charging base and stay there. Press to turn Landxcape
TM
off.
If an error repeatedly occurs in the same area of your lawn, you might have a problem with the boundary wire. Please refer to the Installation
Guide and check your set up with its help.
If your lawn is divided in two separate areas connected by a corridor less than 1m, one of which is not provided with the charging base: when
Landxcape
TM
runs out of charge, take it manually to the charging base, the charge process will start.
If Landxcape
TM
runs abnormally once in a while, please try to restart it. If the problem is not resolved, try to removing and reinstalling the
battery . If the problem is still not resolved, please contact a Landxcape
TM
service agent for help.
Do not wash your Landxcape
TM
with a high pressure washer. This could cause damage to the battery or the machine.
11. Troubleshooting
If your Landxcape
TM
does not work correctly, follow the troubleshooting guide below. If the issue persists, contact your Dealer.
Symptom Cause Action
The LED light on the charging base does
not turn on.
There is no power.
Check the charging base is connected properly to the
charger and the charger is connected to a suitable
power supply.
Red light turns on the charging base. The boundary wire isn’t connected.
Check that the boundary wire has been connected
correctly to the charging base.
Check there are no breaks in the boundary wire, especially
in the wire ends.
Landxcape
TM
turns on, but the blade
disc does not move.
Landxcape
TM
is searching for the charging
base (unless you press then button to
make it go to the charging base)
This is normal. Landxcape
TM
needs to recharge, the
blade disc does not rotate while it is searching for the
charging base automatically.
Landxcape
TM
vibrates.
Blades may be damaged. Check condition of
the blade disc.
Check the blades, and replace them if damaged.
Remove debris and foreign objects from the blades
and blade disc.
Grass is being cut unevenly.
Landxcape
TM
does not work enough hours per
day.
Add more hours to the scheduled mowing time.
Mowing area is too big.
Try decreasing the size of the mowing area or adding
more hours to the mowing time.
Blades are dull.
Change all the blades and screws in order to balance
the blade disc.
The cutting height is too low for the length of
the grass.
Raise the cutting height and then gradually lower.
Grass or other object has wrapped around the
blade disc.
Check the blade disc and remove the grass or other
object.
There is a build-up of grass in the blade disc or
motor frame box.
Make sure the blade disc rotates easily. If need be, you
may take off the blade disc and remove the debris.
Your Landxcape
TM
is inside its territory
and the boundary wire is connected.
And “
“ is displayed.
The boundary wire ends are clamped
incorrectly.
Reverse the boundary wire ends.
The boundary wire is broken. Repair damaged boundary wire with connectors.
EN20
The charging time is far more than the
rated charging time.
Poor connection caused by debris on the
charging strip.
Clean the contact pins located on the charging base
and the charging strip on Landxcape
TM
using a cloth.
The charging protection program has activated
due to high temperature.
Place the charging base in a shady area or wait until
the temperature has cooled down.
The mower does not charge.
There is no power.
Check the power cord is connected properly to the
charger and the charger is connected to a suitable
power supply.
Landxcape
TM
does not operate correctly while
manually charging.
Refer to manual charging in Section 8.3.
Landxcape
TM
is starting to have shorter
run-times between charges.
Something is clogging in the blade disc. Take off the blade disc and clean it.
The grass is too high and too thick.
Check the Blade Disc and blades, remove debris and
foreign objects from the blades and Blade Disc.
Landxcape
TM
is shaking heavily.
Check the blade disc and blades, remove debris and
foreign objects from the blades and blade disc.
Landxcape
TM
is not operating at the
correct time.
The clock is not set to the correct time.
Set the clock to the correct time (refer to Section 5.3)
or by using App.
Programmed cutting times for Landxcape
TM
are not correct.
Change the time settings for the mower to start and
stop.
Landxcape
TM
is manually docked in the
charging base.
Press
then .
The battery does not charge as its temperature
rises above 55
O
C in hot weather.
Wait until the battery has cooled down.
Landxcape
TM
cannot correctly dock
with the charging base.
Environmental influences. Restart Landxcape
TM
.
Poor connection caused by debris on the
charging strip.
Clean the contact pins located on the charging base
and the charging strip on Landxcape
TM
using a cloth.
The green light on the charging base
turns on before charging is complete.
The charging base is overheated.
Place the charging base in a shady area or wait until
the temperature has cooled down.
Landxcape
TM
runs outside the boundary
wire. Landxcape
TM
does not mow an
area within a boundary wire zone.
Landxcape
TM
reverses or rotates
erratically near the boundary wire.
The boundary wire of another Landxcape
TM
or another robotic mower is positioned too
closely.
Ensure your Landxcape
TM
boundary wire has at least
1m of space between the neighboring boundary wire.
The boundary wire has been installed with
tight corners.
Check the boundary wire to ensure the corners are
smooth.
In wet conditions, the boundary wire electric
signal may leak were wire has been joined or
repaired.
Check boundary wire joints. Insulate to provide a fully
waterproof connection.
There is boundary wire electric signal leakage
due to broken insulation.
Repair damaged boundary wire insulation with
connectors.
The cutting area is larger than the allowable
cutting area for Landxcape
TM
.
Reduce the cutting area or use Landxcape
TM
with a
larger allowable cutting area.
Landxcape
TM
wheels skid or damage
lawn.
Foreign obstacles, such as twigs and branches
may be lodged under Landxcape
TM
.
Remove foreign objects from underside of
Landxcape
TM
.
The lawn is too wet. Wait until lawn has dried.
Landxcape
TM
exits the boundary wire
due to high speed when going down a
hill.
The boundary wire is placed on a slope
steeper than 17% (10°).
Reposition the boundary wire away from slopes that
are steeper than 17% (10°). Please refer Installation
Guide for details.
Software update failure occurs. Try again according to section “Software update”.
Environmental Protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local
Authority or retailer for recycling advice.
1 / 1

Landxcape LX791 Manualul proprietarului

Categorie
Cositoare
Tip
Manualul proprietarului
Acest manual este potrivit și pentru