Widex mRIC Charger WPT1 Instrucțiuni de utilizare

GB

AL

BA

BG

RS

HR

RO

SI

SK

TR

UA

USER INSTRUCTIONS

WIDEX mRIC CHARGE n CLEAN

WPC101 model

GB USER INSTRUCTIONS ........................................................................3

AL UDHËZIMET E PËRDORIMIT ............................................................24

BA KORISNIČKO UPUTSTVO ................................................................45

BG УПЪТВАНЕ ЗА УПОТРЕБА ..................................................................67

RS UPUTSTVO ZA UPOTREBU ............................................................. 89

HR KORISNIČKE UPUTE ......................................................................108

RO INSTRUCTIUNI DE UTILIZARE ............................................................127

SI NAVODILA ZA UPORABO ..............................................................147

SK NÁVOD NA POUŽITIE ....................................................................167

TR KULLANMA KILAVUZU ..................................................................186

UA ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ ......................................................... 206

FCC AND ISED STATEMENTS ................................................................ 228

2

3

IMPORTANT SAFETY INFORMATION

Read these pages carefully before you start using your charger.

Keep the charger and other small parts away from children, pets, and

mentally disabled people.

Never expose the charger to temperatures above 60° C (140° F), to

prolonged sunlight, open flames or ignition sources.

Place the charger upright on a flat, stable surface when charging, with

adequate space around the charger. Do not cover or place near flam-

mable substances. This also applies when using a power bank.

Never try to open or repair the charger yourself. Contact your hearing

care professional if you experience defects.

Use only a Widex charger with your hearing aids. Use of a charger not

recommended by WIDEX A/S may compromise the system or result in

dangerous situations.

Never leave the charger in direct sunlight and do not immerse it in wa-

ter.

Never insert other objects than your hearing aids in the charging wells.

Use only a Widex power adapter and cable with your charger.

4

YOUR CHARGER

Welcome

Thank you for choosing this product. Your new CHARGE n CLEAN charger

is intended to detect, charge and maintain your MRR2D hearing aid.

Read these instructions carefully before you start using this device.

NOTE

Your charger may not look exactly like the one illustrated in this booklet. We

reserve the right to make any changes we consider necessary.

The charger at a glance

The charger consists of a charging unit for each hearing aid, a mainte-

nance compartment for the receivers and a light indicator with three indi-

cator lights that show the charging status of the hearing aids and the sta-

tus of the maintenance cycle.

5

IMPORTANT SAFETY INFORMATION

Read these pages carefully before you start using your charger.

YOUR CHARGER

Welcome

Thank you for choosing this product.

Your new WIDEX MOMENTTM mRIC Charge n CLEAN charger is intended to detect,

charge and maintain your WIDEX MOMENTTM mRIC MRR2D hearing aid.

Read these instructions carefully before you start using this device.

NOTE

Your charger may not look exactly like the one illustrated in this booklet. We

reserve the right to make any changes we consider necessary.

The charger at a glance

The charger consists of a charging unit for each hearing aid, a maintenance

compartment for the receivers and three indicator lights that show the charging

status of the hearing aids and the status of the maintenance cycle.

2

3

65 7

4

1

1. Micro USB port

2. Left hearing aid charging well

3. Right hearing aid charging well

4. Receivers maintenance compartment

5. Left hearing aid charge indicator light

6. Right hearing aid charge indicator light

7. Maintenance indicator light

1. Micro USB port

2. Left hearing aid charging well

3. Right hearing aid charging well

4. Maintenance compartment for the

receivers

5. Left hearing aid charging indicator

light

6. Right hearing aid charging indicator

light

7. Maintenance indicator light

5

Operating, storage and transport conditions

Your charger is designed for indoor use. It is sensitive to extreme condi-

tions such as high temperatures, and it should not be operated, stored or

transported in direct sunlight.

Operate the charger within the following conditions:

Minimum Maximum

Temperature 0° C (32° F) 35° C (95° F)

Humidity 20% rH 75% rH

Store and transport the charger within the following conditions:

Minimum Maximum

Temperature -20° C (-4° F) 60° C (140° F)

Humidity 5% rH 90% rH

Atmospheric pressure 750 mbar 1060 mbar

You can find technical data sheets and additional information on your

charger on https://global.widex.com.

6

OPERATING THE CHARGER

Getting ready for use

Power supply

For optimal operation, connect your charger to the mains and use only the

included cable and power supply.

7

OPERATING THE CHARGER

Power supply

For optimal operation, connect your charger to the mains and use only the

included cable and power supply.

Check that your USB port is at

least compatible with USB 2.0.

If it is not, the device (charging

and maintenance) will not work.

USB 2.0

Logo

Connect the cable to the charger:

1. Micro USB port

1

Please make sure that the

USB port is USB 2.0 compati-

ble.

Connect the cable to the charger:

7

OPERATING THE CHARGER

Power supply

For optimal operation, connect your charger to the mains and use only the

included cable and power supply.

Check that your USB port is at

least compatible with USB 2.0.

If it is not, the device (charging

and maintenance) will not work.

USB 2.0

Logo

Connect the cable to the charger:

1. Micro USB port

1

7

Power on

When the charger is connected to the power supply, the indicator lights

flash white 5 times and then turn off:

8

The charger is now in standby mode and ready to charge your hearing aid.

Power on

When the charger is connected to the power supply, the light indicators ﬂash

white 5 times and then turn o:

5X

Right hearing aidLeft hearing aid

Charging the hearing aid

Gently place your hearing aids in their respective charging wells and the

receivers in the maintenance compartment. The hearing aids turn o

automatically. Then close the lid.

The charger is now in standby mode and ready to charge your hearing

aid.

Charging the hearing aid

Gently place your hearing aids in their respective charging wells and the

receivers in the maintenance compartment. The hearing aids turn off au-

tomatically. Then close the lid.

8

The charger is now in standby mode and ready to charge your hearing aid.

Power on

When the charger is connected to the power supply, the light indicators ﬂash

white 5 times and then turn o:

5X

Right hearing aidLeft hearing aid

Charging the hearing aid

Gently place your hearing aids in their respective charging wells and the

receivers in the maintenance compartment. The hearing aids turn o

automatically. Then close the lid.

8

Left hearing aid Right hearing aid

When connected to the power supply, the charger can charge two hearing

aids simultaneously. Depending on the state of the hearing aids, each

hearing aid can also be charged individually. If one hearing aid is fully

charged and placed in the charger, it will not charge, but the other hear-

ing aid, which is not fully charged, will be charged.

Charging your hearing aid fully will take approximately 4 hours. If you

charge your hearing aid for half an hour, you will have approximately 4

hours of use.

While charging the hearing aids, the maintenance (Ultraviolet-C treat-

ment and drying) is carried out. The maintenance cycle takes 30 minutes.

Charging indicators

While the charger is detecting the hearing aid, the light indicator turns

solid yellow:

10

Charging indicators

While the charger is detecting the hearing aid, the light indicator turns

solid yellow:

Once the charger has detected the hearing aid, the charging will begin.

The light indicator will ﬂash green to indicate that the hearing aid is low

on battery and less than 40% charged:

Once the charger has detected the hearing aid, the charging will begin.

9

The light indicator will flash green to indicate that the hearing aid is low

on battery and less than 40% charged:

10

Charging indicators

While the charger is detecting the hearing aid, the light indicator turns

solid yellow:

Once the charger has detected the hearing aid, the charging will begin.

The light indicator will ﬂash green to indicate that the hearing aid is low

on battery and less than 40% charged:

The light indicator will glow green to indicate that the hearing aid is more

than 40% charged:

11

The light indicator will glow green to indicate that the hearing aid is more

than 40% charged:

The light indicator will turn solid green to indicate that the hearing aid is

100% charged:

The light indicator will turn solid green to indicate that the hearing aid is

100% charged:

11

The light indicator will glow green to indicate that the hearing aid is more

than 40% charged:

The light indicator will turn solid green to indicate that the hearing aid is

100% charged:

10

After charging

Avoid removing the hearing aids from the charging wells by pulling the

earwire, as this could damage the connection between the earwire and

the hearing aid. Instead, put your fingers around the hearing aid when re-

moving it from the charger.

When you remove the hearing aid from the charger, the hearing aid turns

on after a few seconds. Remember to turn it off if you are not going to use

it right away.

Immediately after charging, the hearing aid may temporarily feel warm. If

you are not comfortable with this, wait a few minutes for the hearing aid

to reach room temperature, before putting the hearing aid on.

Maintenance

The light indicator will flash white to indicate that the maintenance cycle

is in progress (Ultraviolet-C treatment or drying):

12

Maintenance indicators

The light indicator will ﬂash white to indicate that the maintenance cycle

is in progress (UV-C treatment/drying):

After charging

Avoid removing the hearing aids from the charging wells by pulling the

earwire, as this could damage the connection between the earwire and

the hearing aid.

Instead, put your ﬁngers round the hearing aid when removing it from the

charger. When you remove the hearing aid from the charger, the hearing

aid turns on after a few seconds. Remember to turn it o if you are not

going to use it right away. Immediately after charging, the hearing aid

may temporarily feel warm. If you are not comfortable with this, wait

a few minutes, for the hearing aid to reach room temperature, before

putting the hearing aid on.

11

The light indicator turns solid white to indicate the end of the mainte-

nance cycle:

13

If the lid is opened during the maintenance cycle, the cycle is

paused but the charging continues. The maintenance cycle will

restart when the lid is closed.

The indicator light turns solid white to indicate the end of the

maintenance cycle:

Maintenance pause

(solid yellow light)

If the lid is opened during the maintenance cycle, the cycle is paused but

the charging continues. The maintenance cycle will restart when the lid is

closed.

Maintenance pause

(solid yellow light)

13

If the lid is opened during the maintenance cycle, the cycle is

paused but the charging continues. The maintenance cycle will

restart when the lid is closed.

The indicator light turns solid white to indicate the end of the

maintenance cycle:

Maintenance pause

(solid yellow light)

12

Overview of indicator lights

Charging

14

OVERVIEW OF LIGHT INDICATORS

Charge

Light indicators Status

Solid yellow The charger is detecting the hearing aid.

Flashing green The hearing aid is charging,

low battery, less than 40%.

Glowing green The hearing aid is charging,

battery more than 40%.

Solid green The hearing aid is fully charged,

battery 100% charged.

Indicator lights Status

Solid yellow The charger is detecting the hearing

aid.

Flashing green The hearing aid is charging.

Low battery, less than 40%.

Glowing green The hearing aid is charging.

Battery more than 40%.

Solid green The hearing aid is fully charged.

Battery 100%.

One indicator flashing red An error occurred during charging

and the charging has stopped.

See Troubleshooting.

13

Indicator lights Status

Both indicators flashing red An error occurred during charging

and the charging has stopped.

See Troubleshooting.

Flashing yellow The temperature of the hearing aid

has become too high during charg-

ing and charging is paused.

See Troubleshooting.

Maintenance

16

MAINTENANCE

Light indicators Status

Flashing white

The maintenance cycle is in progress

(UV-C treatment/drying).

Solid white The maintenance cycle is complete.

Solid yellow The maintenance cycle is paused but the

charging cycle continues.

Flashing red An error occurred during the

maintenance and the cycle has stopped.

See Troubleshooting.

Indicator lights Status

Flashing white The maintenance cycle is in pro-

gress (Ultraviolet-C treatment or

drying).

Solid white The maintenance cycle is complete.

14

Indicator lights Status

Solid yellow The maintenance cycle is paused

but the charging cycle continues.

Flashing red An error occurred during the main-

tenance and the cycle has stopped.

See Troubleshooting.

Flashing yellow The maintenance cycle is paused

due to overheating (fan still run-

ning).

See Troubleshooting.

Cleaning

The charger does not generally require cleaning. If necessary, carefully

wipe off the charger with a soft dry cloth.

If you notice any dust in the charging well, gently blow it clean. If this is

not enough, gently clean the charging well with a cotton bud.

To remove earwax from the charger, carefully wipe with a soft cloth with

a bit of mild household detergent.

Never use sharp/pointy objects to clean the charger.

15

TROUBLESHOOTING

These pages contain advice on what to do if your charger does not work

as expected.

Light indicators Possible cause Solution

No lights The charger is not

connected. Make sure that the USB

cable is correctly connec-

ted to the charger and a

USB 2.0 compatible USB

port or plug the USB ca-

ble into the wall socket

using the included power

adaptor.

The hearing aid is not

placed correctly in the

charger.

Place the hearing aid

correctly in the charger.

Right and/or left

indicators flashing

yellow

The temperature of your

surroundings or of the

hearing aid exceeds a

critical limit and the

charging is paused.

The charging will contin-

ue when the temperature

of your surroundings or

the hearing aid has

dropped.

If this happens

continually, find a cooler

place to charge your

hearing aid.

16

Light indicators Possible cause Solution

Right or left indica-

tor flashing red The charger cannot

recognise the hearing aid. Remove the incompatible

hearing aid.

The hearing aid has a

critical error. Remove the hearing aid,

disconnect from the pow-

er for 10 seconds and

then try again.

If the charger is still

flashing red, contact your

hearing care professional.

Central indicator

flashing red The maintenance cycle

has a critical error. Remove the hearing aid,

disconnect from the pow-

er for 10 seconds and

then try again.

If the charger is still

flashing red, contact your

hearing care professional.

Right and left indi-

cators flashing red The charger has a critical

error. Remove the hearing aid,

disconnect from the pow-

er for 10 seconds and

then try again.

If the charger is still

flashing red, contact your

hearing care professional.

17

REGULATORY INFORMATION

Intended use

The WIDEX charger WPC101 model is to be used for charging the MRR2D

hearing aid.

EU directives

Directive 2014/53/EU

Hereby, WSAUD A/S declares that the WPC101 is in compliance with the

essential requirements and other relevant provisions of Directive

2014/53/EU.

The WPC101 contains a radio transmitter operating at: 6.78 MHz, 13.4

dBµA/m @ 3 m.

A copy of the Declaration of Conformity according to 2014/53/EU can be

found at

https://global.widex.com/doc

N26346

Information regarding disposal

Do not dispose of hearing aids, hearing aid accessories and chargers with

ordinary household waste.

18

Hearing aids, hearing aid accessories and chargers should be disposed of

at sites intended for electrical waste and electronic equipment, or given to

your hearing care professional for safe disposal.

For returning or shipping the devices, please contact your hearing care

professional.

FCC and ISED statements

Federal Communications Commission Statement

This device complies with part 15/part 18 of the FCC Rules. Operation is

subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interfer-

ence that may cause undesired operation.

NOTE:

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accord-

ance with the instructions, may cause harmful interference to radio com-

munications. However, there is no guarantee that interference will not oc-

cur in a particular installation. If this equipment does cause harmful inter-

19

ference to radio or television reception, which can be determined by turn-

ing the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

NOTE:

This equipment complies with FCC radiation exposure limits set forth for

an uncontrolled environment. This transmitter must not be co-located or

operating in conjunction with any other antenna or transmitter.

Changes or modifications to the equipment not expressly approved by

WSAUD A/S could void the user’s authority to operate the equipment.

ISED Statement / Déclaration d’ISED

CAN RSS-216/CNR-216

CAN ICES-1/NMB-1

This device contains licence-exempt transmitter(s)/receiver(s) that com-

ply with Innovation, Science and Economic Development Canada’s li-

cence-exempt RSS(s). Operation is subject to the following two condi-

tions:

(1) This device may not cause interference.

20

Pagina se încarcă ...

Widex mRIC Charger WPT1 Instrucțiuni de utilizare

Acest manual este potrivit și pentru

Widex mRIC Charger WPT1 Instrucțiuni de utilizare

în alte limbi

Lucrări conexe

Alte documente