Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany
www.sennheiser.com
Publ. 09/20, 588566/A03
China RoHS
部件名称
(Part Name)
有害物质
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(CrVI)
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
金属部件
(Metal Parts)
x o o o o o
电路模块
(Circuit Modules)
x o o o o o
充電盒
(Charging Case)
x o o o o o
本表格依据 SJ/T 11364 的规定编制。
o:表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572规定的限量要求以下。
x:表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572规定的限量要求。
This device complies with Part 15 of the FCC rules, RSS-247 of Innovation, Sci-
ence and Economic Development Canada (ISED). Operation is subject to the fol-
lowing two conditions: 1) This device may not cause harmful interference, and 2)
This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guar-
antee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications made to this equipment not expressly approved by
Sennheiser electronic Corp. may void FCC authorization to operate this equipment.
Déclaration requise par la FCC et ISDE
Cet appareil est conforme à la Partie 15 des réglementations de la FCC et aux
normes CNR-247 d’Innovation, Sciences et Développement économique Cana-
da (ISDE). L’utilisation de l’appareil doit respecter les deux conditions suivantes :
(1) L’appareil ne doit pas produire d’interférences nuisibles, et, (2) il doit accepter
toutes interférences reçues, y compris celles qui pourraient avoir des effets non
désirés sur son fonctionnement.
CAN ICES-3(B)/NMB-3(B)
RF Radiation Exposure Information
The product complies with the rules of FCC and ISED (RSS-102) for the porta-
ble RF exposure limit set forth for an uncontrolled environment and is safe for
intended operation as described in this manual. This product is not subjected
to FCC routine RF exposure evaluation per Section 2.1093 and RSS-102 of ISED.
Further RF exposure reduction can be achieved if the product can be kept as far
as possible from the user body or set the device to lower output power if such
function is available.
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter. Use of other accessories not verified by the man-
ufacturer may not ensure the compliance.
Informations sur l’exposition aux radiations RF
Le produit est conforme aux règles de la FCC et d’ISDE (CNR-102) en ce qui
concerne la limite d’exposition portable RF définie pour un environnement non
contrôlé et est sans danger pour le fonctionnement prévu, tel que décrit dans
ce manuel. Ce produit n’est pas soumis à l’évaluation de routine de l’exposition
aux RF par la FCC conformément à la section 2.1093 et à la norme CNR-102
d’ISDE. Une réduction supplémentaire de l’exposition aux RF peut être obtenue
si le produit peut être maintenu aussi loin que possible du corps de l’utilisateur
ou si l’appareil est réglé sur une puissance de sortie inférieure, si cette fonction
est disponible.
Cet émetteur ne doit pas être installé ou utilisé en conjonction avec une autre
antenne ou un autre émetteur. L’utilisation d’autres accessoires non vérifiés par
le fabricant ne peut pas garantir la conformité.
Taiwan
經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自
變更頻率、加大功率或變更原設計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象
時,應立即停用,並改善至無干擾時方得繼續使用。前項合法通信,指依電信法規
定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用
電波輻射性電機設備之干擾。
Việt nam
Kể từ ngày 1 tháng 12 năm 2012, các sản phẩm được sản xuất bởi Sennhe-
iser tuân thủ Thông tư 30/2011/TT-BCT quy định về giới hạn cho phép đối
với một số chất độc hại trong các sản phẩm điện và điện tử.
Statements regarding FCC and ISED
SENNHEISER
Model No:
FCC Supplier's Declaration of Conformity (SDoC)
We,
Sennheiser Electronic Corporation
One Enterprise Drive • Old Lyme •
CT 06371 • USA
Tel: +1 (860) 434 9190
Fax: +1 (860) 434 1759
declare the above device comply with the requirements of Federal Communications Commission.
This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions:
1) This device may not cause harmful interference, and
2) This device
must accept any interference received, including interference that may cause
undesired operation.
Responsible Party: Michael Lieske
CX400TW1 R
CX400TW1 L
CX400TW1 C