Vaisala MOG100 Manual de utilizare

Marca: Vaisala

Model: MOG100

Tip: Manual de utilizare

M211951EN-D

User Guide

Vaisala Multi-Observation Gateway

MOG100

PUBLISHED BY

Vaisala Oyj

Vanha Nurmijärventie 21, FI-01670 Vantaa, Finland

P.O. Box 26, FI-00421 Helsinki, Finland

+358 9 8949 1

Visit our Internet pages at www.vaisala.com.

No part of this document may be

reproduced, published or publicly

displayed in any form or by any

means, electronic or mechanical

(including photocopying), nor

may its contents be modiﬁed,

translated, adapted, sold or

disclosed to a third party without

prior written permission of the

documents and translated

portions of multilingual

documents are based on the

original English versions. In

ambiguous cases, the English

versions are applicable, not the

translations.

The contents of this document are

subject to change without prior

notice.

Local rules and regulations may

vary and they shall take

precedence over the information

contained in this document.

Vaisala makes no representations

on this document’s compliance

with the local rules and

regulations applicable at any

given time, and hereby disclaims

any and all responsibilities related

thereto.

This document does not create

any legally binding obligations for

Vaisala towards customers or end

users. All legally binding

obligations and agreements are

included exclusively in the

applicable supply contract or the

General Conditions of Sale and

General Conditions of Service of

Vaisala.

This product contains software

developed by Vaisala or third

parties. Use of the software is

governed by license terms and

conditions included in the

applicable supply contract or, in

the absence of separate license

terms and conditions, by the

General License Conditions of

Vaisala Group.

This product may contain open

source software (OSS)

components. In the event this

product contains OSS

components, then such OSS is

governed by the terms and

conditions of the applicable OSS

licenses, and you are bound by

the terms and conditions of such

licenses in connection with your

use and distribution of the OSS in

this product. Applicable OSS

licenses are included in the

product itself or provided to you

on any other applicable media,

depending on each individual

product and the product items

delivered to you.

Table of Contents

1. About This Document................................................................................... 3

1.1 Version Information.......................................................................................... 3

1.2 Related Manuals................................................................................................3

1.3 Documentation Conventions...........................................................................4

1.4 Trademarks........................................................................................................ 4

2. Product Overview........................................................................................... 5

2.1 Vaisala Multi-Observation Gateway MOG100................................................5

2.2 Safety................................................................................................................. 6

2.2.1 ESD Protection........................................................................................... 7

2.3 Regulatory Compliances.................................................................................. 7

2.3.1 Applicable European Directives...............................................................7

2.3.2 FCC Compliance.........................................................................................8

2.3.3 Ocial Modem Identiﬁcation...................................................................8

3. Overview to Conﬁguration and Installation.........................................9

4. Conﬁguration.................................................................................................. 10

4.1 Installing SIM Card.......................................................................................... 10

4.2 Installing AQ Tool..............................................................................................11

4.3 Establishing Maintenance Connection..........................................................12

4.4 Conﬁguring Wireless Communication.......................................................... 13

4.5 Registering MOG100 in Beacon Cloud..........................................................13

5. Installation........................................................................................................ 15

5.1 Installing MOG100........................................................................................... 15

5.1.1 Installing Mounting Bracket on 60 ... 100‑mm Mast.............................16

5.1.2 Installing Mounting Bracket on Sensor Support Arm or

35 ... 40‑mm Mast.....................................................................................16

5.1.3 Installing Mounting Bracket on Wall...................................................... 18

5.1.4 Installing MOG100 on Mounting Bracket...............................................18

5.2 Installing AQT400/WXT530.......................................................................... 21

5.3 Connecting Cables and Powering................................................................. 21

5.4 Verifying Installation...................................................................................... 23

6. Troubleshooting............................................................................................ 24

6.1 Writing Problem Report................................................................................ 24

7. MOG100 Speciﬁcations..............................................................................25

Appendix A:

EU Declaration of Conformity............................................. 27

Warranty............................................................................................................29

Technical Support............................................................................................29

Recycling........................................................................................................... 29

Table of Contents

MOG100 User Guide M211951EN-D

1. About This Document

1.1 Version Information

This document provides information about the installation and operation of Vaisala Multi-

Observation Gateway MOG100.

Table 1 Document Versions

Document

Code

Date Description

M211951EN-D March 2019 • Operating altitude added

• Regulatory compliance information updated

• Simpliﬁed EU Declaration of Conformity added

M211951EN-C June 2018 • Beacon View changed to Beacon Cloud

• Beacon Cloud web address update

M211951EN-B February 2018 • MOG100 registration instructions updated.

• New 3.5G modem in MOG100.

• Change of UI application names:

• AQ-View changed to Beacon View.

• AQT Conﬁguration Tool changed to AQ Tool.

1.2 Related Manuals

Table 2 Related Manuals

Document Code Name

M211942EN Vaisala Air Quality Transmitter AQT400 Series User Guide

M212056EN Vaisala Multi-Observation Gateway MOG100 Conﬁguration Guide

M212019EN Vaisala Observation Network Manager NM10 Conﬁguration and Maintenance

Manual

M211840EN Vaisala Weather Transmitter WXT530 Series User Guide

The documentation is available online at www.vaisala.com.

Chapter 1 – About This Document

1.3 Documentation Conventions

Warning alerts you to a serious hazard. If you do not read and

follow instructions carefully at this point, there is a risk of injury or even death.

WARNING!

Caution warns you of a potential hazard. If you do not read and

follow instructions carefully at this point, the product could be damaged or

important data could be lost.

CAUTION!

Note highlights important information on using the product.

Tip gives information for using the product more eciently.

Lists tools needed to perform the task.

Indicates that you need to take some notes during the task.

1.4 Trademarks

Vaisalaâ is a registered trademark of Vaisala Oyj.

Microsoftâ and Windowsâ are either registered trademarks or trademarks of Microsoft

Corporation in the United States and other countries.

All other product or company names that may be mentioned in this publication are trade

names, trademarks, or registered trademarks of their respective owners.

MOG100 User Guide M211951EN-D

2. Product Overview

2.1 Vaisala Multi-Observation Gateway MOG100

Vaisala Multi-Observation Gateway MOG100 is a gateway and logger device for Vaisala Air

Quality Transmitter AQT400 Series and Vaisala Weather Transmitter WXT530 Series. MOG100

includes the following components:

• GSM module for wireless communication

• Battery regulator for solar panel and battery input

• Memory for data logging and local buering

MOG100 sends the measuring data from the air quality or weather transmitters to Vaisala

Beacon Cloud, Vaisala Observation Network Manager NM10, and third-party servers, using the

integrated 3.5G (4‑band GSM) cellular modem. MOG100 communicates using the secure HTTP

over TCP/IP protocol (HTTPS).

MOG100 is enclosed in an IP66‑rated weatherproof aluminum casing and can be installed

outdoors. The unit has dedicated connectors for AQT400, WXT530, and for power and

maintenance.

Table 3 MOG100 Options and Accessories

Option Details Order Code

MOG100 unit -

4G/3G/2G GSM antenna - 250327

Mounting kit - ASM211983

Sensor cable, M12/8(F)‑open for power/

maintenance

5 m (16 ft 5 in) 223283

Chapter 2 – Product Overview

Option Details Order Code

Sensor cable, M12/8(F)‑M12/8(F) for

AQT400/WXT536

0.8 m (2 ft 7 in) 248086

1.8 m (5 ft 10 in) 248090

Optional Accessories

Mounting kit for pole mast For 60 mm (2.36 in) pole APPKP60-SET1/2

For 75 mm (2.95 in) pole APPKP75-SET1/2

For 86 mm (3.39 in) pole APPKP86-SET1/2

For 100 mm (3.94 in) pole APPKP100-SET1/2

Sensor cable, M12/8(F)-M12/8(F) for

WXT536

5 m (16 ft 5 in) 248091

Service cable kit, including adapter,

cable, power supply, and USB-RS-232

converter

- 253163SET

2.2 Safety

This product has been tested for safety. Note the following precautions:

Do not substitute parts or modify the system, or install

unsuitable parts in the system. Improper modiﬁcation can damage the product

or lead to malfunction.

WARNING!

Do not perform installation or maintenance procedures when

there is a risk of thunderstorm or lightning activity in the area.

WARNING!

Follow the risk assessments you have carried out for the

installation work. To ensure safety, make sure that all work is organized and

planned, and carried out by competent persons.

WARNING!

Follow local and state legislation and regulations on occupational

safety.

WARNING!

MOG100 User Guide M211951EN-D

Failure to comply with these precautions or with speciﬁc

warnings elsewhere in these instructions violates safety standards of design,

manufacture, and intended use of the product. Vaisala assumes no liability for

the customer's failure to comply with these requirements.

WARNING!

If the equipment is used in a manner not speciﬁed by Vaisala, the

protection provided by the equipment may be impaired.

WARNING!

2.2.1 ESD Protection

Electrostatic Discharge (ESD) can damage electronic circuits. Vaisala products are adequately

protected against ESD for their intended use. However, it is possible to damage the product by

delivering electrostatic discharges when touching, removing, or inserting any objects in the

equipment housing.

To avoid delivering high static voltages to the product:

• Handle ESD-sensitive components on a properly grounded and protected ESD workbench

or by grounding yourself to the equipment chassis with a wrist strap and a resistive

connection cord.

• If you are unable to take either precaution, touch a conductive part of the equipment

chassis with your other hand before touching ESD-sensitive components.

• Hold component boards by the edges and avoid touching component contacts.

2.3

Regulatory Compliances

2.3.1 Applicable European Directives

The device is in conformity with the following EC directives:

• RoHS Directive 2011/65/EU

• EMC Directive 2014/30/EU

• RE Directive 2014/53/EU(*)

* When applicable, the product conforms to the corresponding RED articles:

RF spectrum eciently, Article 3 (2); EMC, Article 3 (1b); Safety, Article 3 (1a)

This product complies with the following test standards:

• EN 301489-1

• EN 55032 Class B / CISPR 32

• EN 61010-1

Chapter 2 – Product Overview

Compliance with the following test standards is derived from Telit HE910 cellular module's

declaration of conformity:

• EN 62311:2008

• EN 301 489-1 V2.1.1, Draft EN 301 489-52 V1.1.0

• Final draft EN 301 489-3 V2.1.1

• EN 300 440 V2.1.1 / EN 301 511 V12.5.1

• EN 301 908-1 V11.1.1 / EN 301 908-2 V11.1.1

To comply with RE directive one must use only the antenna provided with the product

package.

2.3.2 FCC Compliance

This product contains a transmitter module FCC ID RI7HE910.

MOG100 complies with FCC Chapter 47 Part 15, 22H, and 24E. Operating is subject to the

following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

2.3.3 Ocial Modem Identiﬁcation

This product contains part identiﬁed as follows by national authorities:

• FCC ID: RI7HE910

• IC ID: 5131A-HE910

• GITEKI (MIC) ID: 005-100269

• JATE ID: AD12-0318001

MOG100 User Guide M211951EN-D

3. Overview to Conﬁguration and

Installation

First set up MOG100 conﬁguration and verify that it is sending data. Next, install MOG100 to

the selected location.

In conﬁguring MOG100 you need:

• Laptop computer

• Mobile phone or another device for unlocking SIM

• Mobile subscription from service provider, including SIM card

• T10 Torx key

In installing MOG100 you need:

• 5‑mm Allen key

• T10 Torx key

• Crosshead screwdriver

Chapter 3 – Overview to Conﬁguration and Installation

4. Conﬁguration

4.1 Installing SIM Card

• Mobile phone or another device for unlocking SIM

• Mobile subscription from service provider, including SIM card

• T10 Torx key

To enable wireless communication, install the SIM card in MOG100.

1. Insert the SIM card in a mobile phone or a similar device and disable the PIN code query

(SIM card lock). Remove the SIM card from the phone.

2. Remove the 6 screws that hold the cover of MOG100.

3. To unlock the SIM card holder, push and lift it.

4. Insert the SIM card on the device with the chip facing down.

5. To lock the SIM in place, turn the SIM card holder down and push to locking position.

6. Reattach the cover and tighten the 6 screws.

MOG100 User Guide M211951EN-D

7. Connect the GSM antenna to the antenna connector in the middle.

Figure 1 MOG100 Connectors

1 M12 connector for WXT530

2 M12 connector for AQT400

3 SMA connector for GSM antenna

4 M12 connector for power and

maintenance

4.2 Installing AQ Tool

You need a computer with one of the following operating systems:

• Microsoft Windows 7

• Microsoft Windows 8

• Microsoft Windows 10

With AQ Tool, you can conﬁgure where AQT400 sends measurement data.

1. Search www.vaisala.com downloadable ﬁles for "AQT" and save the AQ Tool installer on

your computer (AQT Conﬁguration Tool + USB Driver).

2. Unpack the ﬁles and double-click the EXE ﬁle to start the installer. If prompted about

trusting the program, select Run.

3. Follow the onscreen instructions and accept the default installation location or select

Browse to select a dierent location.

4. To complete the installation, select Finish.

Chapter 4 – Conﬁguration

4.3 Establishing Maintenance Connection

To change and check MOG100 settings, establish a maintenance connection with RS-232 and

AQ Tool.

1. Use the service cable kit to connect your computer to the PWR COMM connector in

MOG100.

Leave the protective caps on the connectors in MOG100 that you are not

going to use.

2. Connect the open-ended cables of the power source to the adapter and attach the

adapter to the DC power connector.

Wire Color

Power

Red +

Black −

Alternatively, connect your own power source directly to the DC power connector.

3. On your computer, select Start > AQ Tool.

4. To connect to the device, select Connect in AQ Tool.

AQ Tool shows the device information in Communication and Conﬁguration.

MOG100 User Guide M211951EN-D

4.4 Conﬁguring Wireless Communication

Before conﬁguring wireless communication, make sure that you have installed the SIM card

and AQ Tool, and established a maintenance connection.

Make sure to disable the PIN code query, for example, with a mobile device.

To enable wireless connection, deﬁne the APN settings using AQ Tool.

1. In AQ Tool Conﬁguration, set the following parameters:

Parameter Alias Description

GSM APN address gsm_apn Access point name (APN) supplied by the

SIM card provider.

GSM username gsm_username Username supplied by the SIM card

provider. If not supplied, leave empty.

GSM password gsm_password Password supplied by the SIM card

provider. If not supplied, leave empty.

2. To save the edited parameters in AQ Tool, select Write to eeprom.

3. Connect power and wait for 15 ... 30 minutes for the device to start sending data to

Beacon Cloud. The device starts to collect data and you can view the data in Beacon

Cloud when you have registered the device.

4.5

Registering MOG100 in Beacon Cloud

Before you start the registration, make sure that MOG100 has been connected to a power

source for 15 ... 30 minutes so that the device has started to send data to Beacon Cloud.

Registering MOG100 links the device with a user account in Beacon Cloud.

1. Locate the test report that is in the product package.

2. In the test report, scan the QR code, for example, with your mobile device.

Beacon Cloud shows the service number and device key. Check that they match with the

ones in the test report.

3. If you are new to Beacon Cloud, select Create Account and give the required information.

Beacon Cloud sends an email that contains the username and password.

If you have a user account in Beacon Cloud, log in to complete the registration.

4. Alternatively, if you cannot use the QR code, go to http://beacon.vaisala.com/mobile.php.

a. Give the serial number and device key and select Next.

b. Continue from step 3.

Beacon Cloud conﬁrms whether the registration was successful.

Chapter 4 – Conﬁguration

5. In Overview in Beacon Cloud, check that MOG100 is listed and its status is Active.

If you have multiple devices, repeat the procedure using the QR code or in Beacon Cloud,

select Overview > Add Device.

Disconnect the service cable.

MOG100 User Guide M211951EN-D

5. Installation

5.1 Installing MOG100

Install MOG100 to a dierent height and away from the air quality transmitter.

First attach the mounting bracket on a mast, sensor support arm, or wall, depending on your

choice of installation, and then attach MOG100 on the mounting bracket:

• Installing Mounting Bracket on 60 ... 100‑mm Mast (page 16)

• Installing Mounting Bracket on Sensor Support Arm or 35 ... 40‑mm Mast (page 16)

• Installing Mounting Bracket on Wall (page 18)

• Installing MOG100 on Mounting Bracket (page 18)

Figure 2 MOG100 Installation Options

Chapter 5 – Installation

5.1.1 Installing Mounting Bracket on 60 ... 100‑mm Mast

• 5‑mm Allen key

For optimum installation, the material of the tube or mast is a minimum of 3 mm

(0.12 in) thick and the outside diameter of the tube or mast is 60 … 100 mm

(2.36 ... 3.94 in).

For masts with a diameter of 60 ... 100 mm (2.36 ... 3.94 in), use the APPKP mounting kit. The

options are:

• APPKP60-SET1/2: Ø 60 mm (2.36 in) pole mast

• APPKP75-SET1/2: Ø 75 mm (2.95 in) pole mast

• APPKP86-SET1/2: Ø 86 mm (3.39 in) pole mast

• APPKP100-SET1/2: Ø 100 mm (3.94 in) pole mast

1. Attach the mounting bracket to the clamp and mount the assembly on the mast.

1 Mounting bracket

2 Clamp

3 Nut DIN985 M6 (2 pcs)

4 Washer DIN125 M6 (4 pcs)

5 Spring washer DIN127 M6 (2 pcs)

6 Hex screw DIN912 M6×16 (2 pcs)

7 Nut DIN929 M6 (2 pcs)

8 Spring washer DIN127 M6 (2 pcs)

9 Hex screw DIN912 M6×25 (2 pcs)

5.1.2 Installing Mounting Bracket on Sensor Support Arm or

35 ... 40‑mm Mast

• 5‑mm Allen key

MOG100 User Guide M211951EN-D

For optimum installation, the material of the tube or mast is a minimum of 3 mm

(0.12 in) thick and the outside diameter of the tube or mast is 35 … 40 mm

(1.38 ... 1.57 in).

1. Attach the mounting bracket on a sensor support arm or mast.

1 Sockethead hex screw M6×60 DIN912 A4 (4 pcs)

2 Flat washer A6,4 DIN125 A4 (4 pcs)

3 Clamp plate

4 Mounting bracket

5 Sensor support arm

Chapter 5 – Installation

5.1.3 Installing Mounting Bracket on Wall

• Screws (2 pcs), suitable for the wall material

• Screwdriver

1. Drill holes into the wall. Use the mounting bracket as a guide.

1 Hole for wall mounting (2 pcs)

2 Mounting bracket

2. Attach the mounting bracket on a wall.

Use wall plugs if necessary, and screws that are suitable for the wall material.

5.1.4 Installing MOG100 on Mounting Bracket

• Crosshead screwdriver

MOG100 User Guide M211951EN-D

Pagina se încarcă ...

Vaisala MOG100 Manual de utilizare

Marca: Vaisala

Model: MOG100

Tip: Manual de utilizare

Descărcați PDF

raport

în alte limbi

English: Vaisala MOG100 User manual

Vaisala MOG100 Manual de utilizare

Vaisala MOG100 Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente