Gigabyte GS27Q X Manual de utilizare

GAMING MONITOR

GS SERIES USER GUIDE

GS27Q X / GS27QA

Copyright

The trademarks mentioned in this manual are legally registered to their respective

owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of

GIGABYTE.

Changes to the specifications and features in this manual may be made by

GIGABYTE without prior notice.

No part of this manual may be reproduced, copied, translated, transmitted,

or published in any form or by any means without GIGABYTE’s prior written

permission.

• In order to assist in the use of this monitor, carefully read the User Guide.

• For more information, check on our website at:

https://www.gigabyte.com

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade Dress

and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing

Administrator, Inc.

CONTENTS

INTRODUCTION..................................................4

Package Contents ...............................................4

Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

GETTINGSTARTED6

Installing the Stand Base ........................................6

Cable Management .............................................7

Adjusting the Viewing Angle .....................................8

Installing a Wall-Mount Bracket (Optional) ........................9

USINGTHEDEVICE 10

Turning the Power On/O ..................................... 10

Selecting the Input Source..................................... 11

OPERATIONS 11

Quick Menu ................................................... 11

Function Key Guide ........................................... 13

APPENDICES................................................... 22

Specications ................................................. 22

Supported Timing List ......................................... 23

Troubleshooting .............................................. 25

Basic Care..................................................... 25

GIGABYTE Service Information ................................. 25

SAFETYINFORMATION 26

Safety Precautions ............................................ 26

Stability Hazard Precautions ................................... 27

User Comfort Recommendations............................... 27

REGULATORYINFORMATION.................................... 28

- 4 -

INTRODUCTION

PackageContents

The following items come with your packaging box. If any of them is missing,

please contact your local dealer.

Note: Please keep the packaging box and packing materials for possible

transportation of the monitor.

Monitor

Stand

Monitor Base

DP Cable

Power Cable

Quick Start Guide

Warranty Card

- 5 -

ProductOverview

FrontView

RearView

1Power LED 2Control button

1HDMI ports (x2) 3Headphone jack

2DisplayPort 4AC IN jack

1

2

DPHDMI-1 HDMI-2

43

12

HDMI-1 HDMI-2 DP AC

1

2

DPHDMI-1 HDMI-2

43

12

HDMI-1 HDMI-2 DP AC

- 6 -

GETTING STARTED

InstallingtheStandBase

1. Position the monitor face down on a flat surface with its protective foam

underneath and with its Styrofoam bag covered.

2. Fit the stand riser and stand base together with a coin, a screwdriver, or the

pull ring attached on the stand base.

3. Tear apart the Styrofoam bag. Fit the stand riser to the groove on the back of

the monitor. Push the stand until it snaps into place.

4. Take the monitor from the protective foam by holding its stand riser. Place it

upright on a table.

- 7 -

CableManagement

1. Take out the cable clip from the EPS.

2. Snap the cable clip into the stand, then pass the power cord and the cable

through the cable clip in the stand to connect them to the monitor.

- 8 -

AdjustingtheViewingAngle

1. Place one hand on the base to prevent the monitor from tipping over during

the adjustment.

2. Place the other hand on the top-center of the screen and apply forward or

backward pressure to adjust the angle to the desired viewing angle (-5° to 20°).

20°

5°

- 9 -

InstallingaWall-MountBracket(Optional)

Use only 100 x 100 mm compliant wall mount kit. Install the wall mount according

to the manufacturer’s instructions.

1. Position the monitor face down with its protective foam or with a nonabrasive

cloth underneath.

2. Align the wall-mount bracket installation holes with the screw holes on the

back of the monitor.

3. Use the screws to secure the bracket in place.

Note: To mount the monitor on the wall, refer to the installation guide that is

included in the wall-mount bracket kit.

100 mm

HDMI-1HDMI-2 DP AC

100 mm

HDMI-1HDMI-2 DP AC

- 10 -

USING THE DEVICE

TurningthePowerOn/Off

Make sure the power switch next to the AC power input jack is switched to ON.

PowerOn

1. Connect one end of the power cable to the AC IN jack at the rear of the monitor.

2. Connect other end of the power cable to a power outlet.

3. Press the Control button to turn on the monitor. The Power LED will light in

white, indicating the monitor is ready to use.

PowerOff

Press the Control button for 2 seconds to turn off the monitor.

Note: When the Main menu appears on the screen, you can also turn off the monitor

by moving the Control button down ( ). Refer to page 13.

- 11 -

SelectingtheInputSource

1. Move the Control button right ( ) to

enter the Input menu.

2. Move the Control button center ( ) to

select the desired input source. Then

press the Control button to confirm.

OPERATIONS

QuickMenu

HotKey

By default, the Control button has been assigned with the specific function.

Note: To change the preset hot key function, refer to the “Quick Switch” section on

page 20.

To access the hot key function, do the following:

• Move the Control button up ( ) to enter the BlackEqualizer menu.

Move the Control button up/down

( ) to adjust the setting and press the

Control button to confirm.

ExitAdjust

10

Black Equalizer

ExitSelect

Input

HDMI 1

HDMI 2

DisplayPort

- 12 -

• Move the Control button down ( ) to enter the PictureMode menu.

Move the Control button center ( ) to

select the desired option and press the

Control button to confirm.

• Move the Control button left ( ) to enter the Crosshair menu.

Move the Control button up/down ( )

to select the desired option and press the

Control button to confirm.

• Move the Control button right ( ) to enter the Input menu. Refer to the

“Selecting the Input Source” section.

Note: To close the menu, move the Control button left ( ).

Picture Mode

Standard

Gaming

Movie

Reader

sRGB

Custom

ECO

ExitSelect

Crosshair

OFF

Style 1

Style 2

Style 3

Style 4

ExitSelect

- 13 -

FunctionKeyGuide

• Press the Control button to display the Main menu.

GameAssist

• When the Main menu appears on the screen, move the Control button right

( ) to enter the GameAssist menu.

Then use the Control button to select the desired function and configure the

related settings.

Game Info

Display Alignment

Gaming Timer

Refresh Rate

Info Location

ExitSelect

Game Assist

EXIT

SETTING

POWER OFF

GAME ASSISTCROSSHAIR

Game AssistCrosshair

Exit

Settings

Power Off

- 14 -

• GameINFO: Configure the FPS (First Person Shooting) game related settings.

√ Select GamingTimer to select countdown timer mode. To disable this

function, set the setting to OFF.

√ Select RefreshRate to enable/disable real-time refresh rate setting.

√ Select InfoLocation to specify the location of the information to be shown

on the screen.

• DisplayAlignment: When the function is enabled, it displays the alignment

lines on the four sides of the screen, providing handy tool for you to line up

multiple monitors perfectly.

ConfiguretheDeviceSettings

When the Main menu appears on the screen, move the Control button up ( )

to enter the Settings menu.

Note: Use the Control button to navigate through the menu and make

adjustments.

60





Exit

Move/Adjust

Enter/Conrm

Button Guide

Exit

Move/Adjust

Enter/Confirm

Button Guide

- 15 -

Gaming

Configure the game related settings.

Item Description

Aim Stabilizer When this function is enabled, it reduces the motion blur

in a fast moving games.

Note: This function is not available under the following conditions:

- when the frequency setting is lower than 100Hz.

- when the FreeSync Premium function is activated.

Black Equalizer Adjust the brightness of the black areas.

Super Resolution Sharpen the low resolution images.

Display Mode Select the aspect ratio of the screen.

• Full: Scale the input image to fill the screen. Ideal for 16:9

aspect images.

• Aspect: Display the input image without geometric distortion

filling as much of the screen as possible.

Note: This option is not compatible with FreeSync Premium and

PIP/PBP functions.

Overdrive Improve the response time of the LCD monitor.

FreeSync

Premium

When this function is enabled, it eliminates the screen lag

and tearing while playing games.

Picture Mode: Standard

Gaming

Picture

Display

PIP/PBP

System

Language

Reset all

Resolution

2560x1440

Black Equalizer

10

Aim Stabilizer

OFF

FreeSync Premium

ON

Overdrive

OFF

Refresh Rate

60 HZ

Aim Stabilizer

Black Equalizer

Super Resolution

Display Mode

Overdrive

FreeSync Premium

Exit

Move/Adjust

Enter/Confirm

10

Picture Mode: Standard

- 16 -

Picture

Configure the image related settings.

Item Description

Standard For editing documents or browsing websites.

Gaming For playing games.

Movie For watching movies.

Reader For viewing documents.

sRGB For viewing photos and graphics on the computer.

Custom Customized picture mode settings.

ECO For Energy saving mode.

Note: Picture mode “Standard”, Low blue light “Level 10” is the optimized setting in

compliance with TÜV Low Blue Light Certification.

Picture Mode: Standard

Gaming

Picture

Display

PIP/PBP

System

Language

Reset all

SDR Brightness

50

Contrast

50

Color Temperature

Normal

Sharpness

5

Gamma

Gamma 3

Standard

Gaming

Movie

Reader

sRGB

Custom

ECO

Brightness

Contrast

Color Vibrance

Sharpness

Gamma

Color Temperature

Low Blue Light

DCR Exit

Move/Adjust

Enter/Confirm

50

Picture Mode: Standard

- 17 -

Display

Configure the display screen related settings.

Item Description

Input Select the input source.

Overclock Select ON/OFF.

RGB Range Select an appropriate RGB range setting or let the monitor

to detect it automatically.

Note: This option is only available for HDMI input.

Overscan When this function is enabled, it slightly enlarges the input

image to hide the outermost edges of the image.

Picture Mode: Standard

Gaming

Picture

Display

PIP/PBP

System

Language

Reset all

SDR Brightness

50

Contrast

50

Color Temperature

Normal

Sharpness

5

Gamma

Gamma 3

Input

Overclock

RGB Range

Overscan

HDMI 1

HDMI 2

DisplayPort

Exit

Move/Adjust

Enter/Confirm

Picture Mode: Standard

- 18 -

PIP/PBP

Configure multi-image related settings.

Item Description

OFF Disable PIP/PBP function.

PIP Divide the screen into two parts (main window and inserted

window)

• Signal source: Change the input source of the inserted window.

• PIP size: Adjust size of the inserted window.

• Position: Move the inserted window to a different position.

• Display switch: Switch between the two windows.

• Audio switch: Select the audio source of the desired sound.

PBP Display 1x1 split screen (with left and right windows).

• Signal source: Change the input source of the right window.

• PBP size: Adjust size of the window.

• Display switch: Switch between the two windows.

• Audio switch: Select the audio source of the desired sound.

Note: PIP/PBP is not compatible with HDR and FreeSync Premium functions.

Picture Mode: Standard

Gaming

Picture

Display

PIP/PBP

System

Language

Reset all

SDR Brightness

50

Contrast

50

Color Temperature

Normal

Sharpness

5

Gamma

Gamma 3

OFF

PIP

PBP

Exit

Move/Adjust

Enter/Confirm

Picture Mode: Standard

- 19 -

System

Configure the system related settings.

Item Description

Audio Configure the headphone settings.

• Volume: Adjust the volume level.

• Mute: Enable/Disable the mute function.

OSD Settings Configure the on-screen display (OSD) menu related settings.

• Display Time: Set the length of time the OSD menu remains on

the screen.

• OSD Transparency: Adjust the OSD menu transparency.

• OSD Lock: When this function is enabled, no OSD adjustment

is allowed.

Note: To disable the OSD lock function, press the Control key.

When the message appears on the screen, select Yes to confirm.

The button is locked,

confirm to unlock OSD.

No Yes

Picture Mode: Standard

Gaming

Picture

Display

PIP/PBP

System

Language

Reset all

SDR Brightness

50

Contrast

50

Color Temperature

Normal

Sharpness

5

Gamma

Gamma 3

Audio

OSD Setting

Quick Switch

Other Setting

Volume

Mute

Exit

Move/Adjust

Enter/Confirm

Picture Mode: Standard

- 20 -

Item Description

Quick Switch Assign the function of the hot keys.

Available options: Aim Stabilizer, Black Equalizer, Crosshair,

Low Blue Light, Volume, Input, Contrast, Brightness, and

Picture Mode.

The default setting of the hot keys as below:

ÖUp ( ): Black Equalizer

ÖDown ( ): Picture Mode

ÖRight ( ): Input

ÖLeft ( ): Crosshair

Other Settings • Resolution Notice: When this function is enabled, the current

resolution message will appear on the screen when the monitor

switches to another input source.

• Input Auto Switch: When this function is enabled, it automatically

switches to an available input source.

• Auto Power Off: When this function is enabled, the monitor

will automatically turn off after a certain amount of time.

• LED Indicator: By default, the LED indicator is set to AlwaysON.

ÖAlways OFF: Turn off the Power LED.

ÖAlways ON: The Power LED lights white during operation and

lights interval every 1 sec. in standby mode.

ÖStandby ON: The Power LED turns off during operation and

lights interval every 1 sec. in standby mode.

(Note:The Power LED will turn on for 1 minute after restarting

the display in Standby ON mode.)

• Quick Boot: When this function is enabled, it slightly improves

the boot-up speed of the screen.

Pagina se încarcă ...

Gigabyte GS27Q X Manual de utilizare

Gigabyte GS27Q X Manual de utilizare

în alte limbi

Lucrări conexe