Wellis Coyote pizza oven Manual de utilizare

EN

DE

FR

HU

RO

Coyote

WB00377

Coyote Pizza Oven

INSTRUCTION GUIDE

Pizzaofen

BEDIENUNGSANLEITUNG

Four à pizza

GUIDE D’UTILISATION

Coyote pizzasütő

HASZNÁLATI ÚTMUTATÓ

Cuptor pentru pizza

GHID DE INSTRUCȚIUNI

EN

IMPORTANT:

Save for electrical inspector’s use.

Installer: Leave installation instructions with the homeowner.

Homeowner: Keep installation instructions for future reference

EN Coyote Pizza Oven

INSTRUCTION GUIDE

Instructions:

Cleaning of the pizza oven:

The oven burns with wood. To heat the oven, only wood or briquette

may be used. Place the wood into the rebox of the oven and light it!

Do not use gasoline or any other substance that may be det-

rimental to health! Let the wood completely burn down, push the

embers remaining from the wood to the edge of the cooking area, and

put the prepared pizza on top of the heated stone! Take the complete

pizza out with a pizza peel! When you’re done cooking, pull the cold

ashes into the ash box!

Let the pizza stone cool completely before cleaning!

Use the ash rake to pull the majority of ash out, and sweep the rest

out with the help of a wire brush!

Wipe the oven’s inside and outside with a wet, soft cloth if needed!

Do not use strong chemicals or substances that may damage the

surface!

WARNING: Do not use any ammable

liquids to start a re

Welcome

Thank you for purchasing your Coyote Pizza Oven Appliance! We appreciate

your business and we recommend that you read this entire User’s Manual

before operating your new appliance for the rst time.

This manual contains instructions on how to properly install and set up your

new range, as well as insights into the unique features that our product offers.

Please keep this manual for future reference, as it contains answers to ques-

tions that you might have as you begin to cook.

Thank you

This manual applies to the following models’ series:

Model # WB00377 (Coyote Pizza Oven)

EN Parts Explosive Pictures

Explosive Part Name Quantity

1 Chimney coping 1

2 Chimney supporting rod 1

3 Chimney pipe assembly 1

4 Pizza oven cavity 1

5 Thermometer 1

6 Mica plate 1 4

7 Pizza oven door handle assembly 1

8 Pizza oven door assembly 1

9 Beam welding assembly 1

10 Cabinet left side panel 1

11 Left/Right handle welding assembly 1

12 S-shape Pothook 1

13 Pothook 1 3

14 Pothook 2 1

15 Cabinet top panel welding assembly 1

16 Condiment storage welding assembly 1

17 Kick panel plate 1

18 Supporting leg 2

19 Fixed caster 2

20 Universal caster with brake 2

21 Cabinet bottom panel welding assembly 1

22 Left door assembly 1

23 Right door assembly 1

24 Beam welding assembly 1

25 Cabinet right side panel welding assembly 1

26 back panel welding assembly 1

27 Ash pan welding assembly 1

28 Cordierite rebrick B 4

29 Cordierite rebrick A 2

30 Net Cover 1

31 Door hinge 4

32 Ash pan holder 2

33 Pizza wheel 1

Parts List

EN 34 Pizza cutter 1

35 Pizza oven brush 1

36 Large pizza oven shovel 1

37 ¼” Philips thumb head screw with antislip design 65

38 Philips thumb head screw 2

39 at head screw 24

40 1/4” nut 3

41 cabinet back connecting plate 2

42 cabinet front connecting plate 1

43 ¼” at gasket 3

44 ¼” spring washer 1

Product Dimension

EN Cabinet Installation

Step 1

1. Install 2 pcs supporting legs (Part # 18) to bottom welding part

(Part # 21) and adjust the supporting legs to suitable position;

2. Use 16 pcs ¼” at Philip’s screw head (Part # 37) to connect 2 pcs

xed casters (Part # 19) and 2 pcs universal casters with brake

(Part # 20) to Part #21

Step 2

1. Use 2 pcs Philips thumb head screw (Part # 38) to install Kick panel plate

(Part # 17) to Part # 21;

2. Use 3 pcs ¼” at Philip’s screw head (Part # 37) to connect left side panel

(Part # 10) to Part # 21;

3. Use 3 pcs Part # 37 to connect right side panel (Part # 25) to Part # 21;

4. Use 8 pcs Part # 37 to connect back panel (Part # 26) to Part #21, # 10

and #25;

5. Make sure all the connections are smooth, Do not over-tighten all the

screws until parts are lined up

EN Step 3

1. Use 4 pcs Part # 37 to connect beam welding part (Part # 24) to

Part # 10 and Part # 25;

2. Use 4 pcs Part # 37 to connect top cover welding part (Part # 15)

to Part # 10 and Part # 25

Door Stop: Front

Step 4

1. Make sure all the connections are smooth and the design is looking like

below picture

EN Step 5

1. Use 2 pcs ¼” 14” screw (Part # 37) to go through the two holes on

Pizza oven door handle assembly (Part # 67), then go through 4

pcs mica plates (Part # 6), 2 pcs ¼” at gasket (Part # 43), 2 pcs

¼” spring gasket (Part # 44), and 2 pcs ¼” hexagon nut (Part #40)

to install Part # 7 to Pizza oven door assembly (Part # 8)

2 x 1/4 14” screw

4 x mica plate

2 x 1/4” at gasket

2 x 1/4” spring gasket

2 x 1/4” hexagon nut

Step 6

1. Use 4 pcs ¼” Philips thumb head screw with anti-slip design (Part # 37) to

put 2 pcs ash pan holder (Part # 32) to the back of Pizza oven cavity (Part

# 4);

2. One part # 32 are installed, install ash pan welding assembly (Part # 27)

“a” Enlarged View

EN Step 7

1. Use 1 pc ¼” nut (Part # 40) and 1 pc ¼” at gasket (Part # 43) to

connect chimney coping (Part # 1) to chimney supporting rod (Part

# 2)

2. Install Part # 1 and # 2 to the top of Chimney Pipe Assembly (Part

# 3);

3. Use 4 pcs ¼” at Philip’s screw head (Part # 37) to connect Part #

3 to Pizza Oven Cavity (Part # 4)

Step 8

1. Put 4 pcs Cordierite Brick B (Part # 28), 2 pcs Cordierite Brick A (Part #

29) and 1 pc net cover (Part # 30) inside Pizza oven Cavity (Part # 4)

2. Insert Pizza oven door assembly (Part #8) into designated position on Part

# 4.

3. Maximum Temperature inside the Pizza Oven Cavity is 430 °C

EN Step 9

1. Use 6 pcs ¼” Philips thumb head screw with anti-slip design (Part

# 37) to install Pizza oven cavity (Part # 4) to Cabinet left side pan-

el (Part # 10) and Cabinet right panel (Part # 25). Make sure the

connection is smooth;

2. Do not over-tighten all the screws until parts are lined u

Step 10

1. Use 2 pcs Part # 37 to connect condiment storage welding assembly (Part

# 16) to front panel assembly (Part # 15);

2. Use 24 pcs Parts # 39 to install door hinge (Part # 31) Part # 22 with Part

# 10, and Part # 23 with Part # 25;

3. Connect Part # 22 with Part # 10 and connect Part # 23 with Part # 25;

4. Do not over-tighten all the screws until parts are lined up

EN

Detailed Installation Pictures for Door hinge is shown below:

Step 11

1. Use 4 pcs Part # 37 to connect Left handle welding assembly (Part # 11)

to Left side panel (Part # 10), then put S-shape pothook (Part # 12) on

Part # 11;

2. Use 8 pcs Part # 37 to connect side panel hook 1 (Part # 13) and side

panel hook 2 (Part # 14) to the left panel (Part # 10);

3. Part # 11, # 12, # 13 and # 14 could be installed on the right panel of pizza

oven cabinet (Part #2 5) if needed. Please make sure the connections are

smooth.

EN

You Coyote Pizza Oven Outdoor Cabinet could be connected with any other Coyote Outdoor Cabinet models.

If you are having a Corner Cabinet and you would like to connect it to another cabinet, use corner cabinet

connecting plate with 2 pcs 1/4" screws (Part # 06.02.00093-000-AO) to connect both cabinets;

If you are having a Sink Cabinet, Appliance Cabinet or Pizza oven Cabinet, use cabinet connecting plate with 2 pcs

1/4" screws to connect both cabinets.

Cabinet front

connecting

Plate

Corner Cabinet

Front connecting

plate

Pagina se încarcă...

Wellis Coyote pizza oven Manual de utilizare

Wellis Coyote pizza oven Manual de utilizare

în alte limbi

Lucrări înrudite

Alte documente