Parkside PLBS 30 A1 Operation and Safety Notes

FINE SOLDERING IRON SET PLBS 30 A1

FINE SOLDERING IRON SET

Operation and Safety Notes

SET ZA PRECIZNO LEMLJENJE

Upute za posluživanje i za Vašu sigurnost

SET CIOCAN DE LIPIT

Instrucţiuni de utilizare şi de siguranţă

ΗΛΕΚΤΡΙΚΟ ΚΟΛΛΗΤΗΡΙ ΣΕΤ

Υποδείξεις χειρισμού και ασφαλείας

КОМПЛЕКТ ЗА ФИНО ЗАПОЯВАНЕ

Инструкции за обслужване и безопасност

FEINLÖTKOLBEN-SET

Bedienungs- und Sicherheitshinweise

IAN 86586

GB Operation and Safety Notes Page 5

HR Upute za posluživanje i za Vašu sigurnost Stranica 21

RO Instrucţiuni de utilizare şi de siguranţă Pagina 35

BG Инструкции за обслужване и безопасност Cтраница 51

GR Υποδείξεις χειρισμού και ασφαλείας Σελίδα 67

DE / AT / CH Bedienungs- und Sicherheitshinweise Seite 83

Before reading, unfold the page containing the illustrations and familiarise yourself with all

functions of the device.

Prije nego što pročitate tekst, otvorite stranicu sa slikama i upoznajte se na osnovu toga sa svim

funkcijama uređaja.

Înainte de a citi instrucţiunile, priviţi imaginile şi familiarizaţi-vă cu toate funcţiile aparatului.

Преди да прочетете отворете страницата с фигурите и след това се запознайте с всички

функции на уреда.

Πριν ξεκινήσετε την ανάγνωση, ανοίξτε τη σελίδα με τις εικόνες και εξοικειωθείτε με όλες τις

λειτουργίες της συσκευής.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend

mit allen Funktionen des Gerätes vertraut.

1

2

3

8

7

4

5

A B

C D

10

3

119

5

4

6

12

2

5 GB

Introduction

Proper use ............................................................................... Page 6

Features and equipment ......................................................... Page 6

Included items ......................................................................... Page 7

Technical information ............................................................. Page 7

Safety advice

1. Workplace safety ............................................................... Page 8

2. Electrical safety .................................................................. Page 8

3. Personal safety ................................................................... Page 9

4. Careful handling and use of electrical power tools ........ Pag e 11

Original accessories / attachments .......................................Pag e 11

Before first use

Fitting the helical spring ......................................................... Page 12

Inserting / replacing soldering tips ........................................Page 12

Operation

Switching on and off .............................................................. Page 13

Third hand ............................................................................... Page 13

Solder sponge.........................................................................Page 13

Soldering ................................................................................. Page 14

Maintenance and cleaning .................................. Page 15

Service centre .................................................................Page 16

Warranty ............................................................................ Page 16

Disposal ................................................................................ Page 17

Declaration of Conformity /

Manufacturer

.................................................................. Page 18

Table of contents

6 GB

IntroductionIntroduction

Fine soldering iron set PLBS 30 A1

Q

Introduction

We congratulate you on the purchase of your new device. You have

chosen a high quality product. The instructions for use are part of the

product. They contain important information concerning safety, use

and disposal. Before using the product, please familiarise yourself with

all of the safety information and instructions for use. Only use the unit as

described and for the speciﬁed applications. If you pass the product on

to anyone else, please ensure that you also pass on all the documen-

tation with it.

Q

Proper use

The appliance is intended for electronic soldering for leisure and DIY

purposes. It is designed for uses such as soldering work, wood-engrav-

ing, welding and gluing plastics and the application of decorations.

Use the device only as described and for the indicated purposes. The

device is not intended for commercial use. Any other use or modiﬁca-

tion to the device shall be considered as improper use and could give

rise to considerable dangers. The manufacturer will not accept liability

for loss or damage arising from improper use.

Q

Features and equipment

1

Soldering pencil

2

Soldering tip

7 GB

IntroductionIntroduction

3

Helical spring

4

Clips

5

Third hand

6

Holder for copper attachments

7

Multifunctional holder

8

Soldering sponge

9

Universal attachment

10

Pointed attachment

11

Conical attachment

12

Tin solder

Q

Included items

1 Fine soldering iron set PLBS 30 A1

1 Multifunctional holder

2 Rolls of soldering tin (10 grams each)

2 Soldering tips (1x installed)

4 Copper attachments (engraving tips)

1 Solder sponge

1 Operating instructions

Q

Technical information

Electricity supply: 230 V AC

Nominal frequency: 50 Hz

Rated power: 30 W

8 GB

Q

Safety advice

CAUTION! Failure to observe the instructions and

advice given below may result in electric shock, ﬁre

and / or serious injury.

1. Workplace safety

a) Keep your working area clean and well lit. Untidy or

poorly lit working areas can lead to accidents.

b) Do not work with the device in potentially explosive

environments in which there are inflammable liquids,

gases or dusts. Electrical power tools create sparks, which can

ignite dusts or fumes.

c) Keep children and other people away while you are

operating the electrical tool. Distractions can cause you to

lose control of the device.

2. Electrical safety

To avoid danger to life from electric shock:

a)

The mains plug on the device must match

the mains sock-

et. The plug must not be modified in any way. Do not

use an adapter plug with devices fitted with a protec-

tive earth. Unmodiﬁed plugs and matching sockets reduce the

risk of electric shock.

b) Keep the device away from rain or moisture. Water en-

tering an electrical device increases the risk of electric shock.

Safety adviceSafety advice

9 GB

c) Use a residual current device (RCD) for protection if

operating the electrical power tool in a moist environ-

ment is unavoidable. The use of an RCD reduces the risk of

electric shock.

d) Do not use the mains lead for any purpose for which it

was not intended, e.g. to carry the device, to hang up

the device or to pull the mains plug out of the mains

socket. Keep the mains lead away from heat, oil,

sharp edges or moving parts of the device. Damaged or

tangled mains leads increase the risk of electric shock.

e) D

o not operate the device if the mains lead or mains plug is damaged.

A damaged mains lead presents a serious

danger to life from electric shock.

f) Always keep the mains lead out of the operating area and run it

away from the rear of the device.

g) Always pull out the mains plug if you are about to leave the device

unattended or wish to carry out any tasks on the device.

3. Personal safety

a) Children or persons who lack the knowledge or expe-

rience to use the device or whose physical, sensory or

intellectual capacities are limited must never be al

lowed

to use the device without supervision or instruction

by a person responsible for their safety. Children must

never be allowed to play with the device.

b) Remain alert at all times, watch what you are doing

and always proceed with caution. Do not use the

device if you are tired or under the influence of drugs,

alcohol or medication. One moment of carelessness when

using the device can lead to serious injury.

Safety adviceSafety advice

10 GB

DANGER OF BURNS! Never touch the hot soldering tip or the

molten solder. You could suﬀer burn injuries. Always let the device

cool before you replace components on the device, clean it or check

its condition.

After use let the soldering pencil cool down in air only. Under no

circumstances quench the tip in water!

CAUTION! DANGER OF FIRE! Place the soldering pencil down

only in the special multifunctional holder or on a ﬁre-resistant pad.

Place the soldering pencil in the multifunctional holder during

pauses in your work.

Keep the device away from combustible material.

Never leave the device switched on and unattended.

CAUTION! DANGER OF INJURY! Keep your hands away

from the hot workpiece. The heat from soldering can be conducted

through the workpiece. For this reason you should use the third

hand to hold small workpieces.

Avoid placing the hot soldering tip in contact with the plastic parts

of the multifunctional holder. Failure to observe this advice may

result in damage to the device.

If a dangerous situation arises, pull the mains plug immediately

out of the mains socket.

CAUTION! DANGER OF POISONING! Do not breathe air

contaminated with soldering fumes.

When working with the device for long periods do not allow the

fumes from soldering to build up. They may be hazardous to

health. Always provide adequate ventilation of your working area.

In addition, it is recommended

that you wear protective gloves, a

face mask and a protective

apron.

Do not eat, drink or smoke in rooms where soldering is carried

out. Otherwise your hands may transfer any adhering traces of

lead via food or cigarettes into your body.

Always wash your hands immediately after soldering .

Safety adviceSafety advice

11 GB

Do not dispose of soldering waste with the household rubbish.

Soldering waste must disposed of as special waste.

4. Careful handling and use

of electrical power tools

a) When not in use always ensure that electrical power

tools are kept out of reach of children. Do not let any-

one use the device if he or she is not familiar with it

or has not read the instructions and advice. Electrical

power tools are dangerous when they are used by inexperienced

people.

b) Look after the device carefully. Check for broken

parts or parts that are damaged to the extent they

detrimentally affect the functioning of the device.

Have any damaged parts repaired before you use

the device. Many accidents have their origins in poorly main-

tained electrical tools.

Q

Original accessories / attachments

Use only the accessories detailed in the operating instructions. The

use of attachments or accessories other than those recommended

here could lead to you suﬀering an injury.

Safety adviceSafety advice

12 GB

Q

Before ﬁrst use

Q

Fitting the helical spring

Insert the narrower end of the helical spring

3

into the opening

of the multifunctional holder

7

.

Ensure that the outwardly bent end of the helix points upwards

and insert it into the recess provided for it in the multifunctional

holder

7

(see arrow in Fig. B).

Push the helical spring

3

into the opening as far as it will go.

Turn the helical spring

3

clockwise to ﬁx the multifunctional

holder

7

in place.

Q

Inserting / replacing soldering tips

CAUTION! DANGER OF BURNS! Allow the soldering pencil to

heat up without a soldering tip.

Removal of a soldering tip

2

or a copper attachment

9

10

11

may only be done when the appliance has been switched oﬀ and

the soldering tip or attachment has cooled down.

All soldering tips and attachments have a screw thread and can,

therefore, be easily and quickly replaced on the soldering pencil

1

.

Turn the soldering tip or attachment anti-clockwise to remove it.

Turn the soldering tip or attachment clockwise to ﬁx it in place.

OperationBefore first use

13 GB

Q

Operation

Q

Switching on and oﬀ

Switching on:

Insert the mains plug into a suitable mains socket.

Switching off:

Pull the plug out of the mains socket to switch oﬀ the device.

Q

Third hand

CAUTION! DANGER OF BURNS! The clips on the third hand

5

can become hot while you are soldering the workpiece.

1. Fold out the third hand

5

upwards.

2. Rotate the clips

4

until they are oriented in the required direction.

3. Clamp the workpiece between the two clips

4

.

Q

Solder sponge

CAUTION! The hot soldering tip

2

must never be placed in

contact with a dry solder sponge

8

, otherwise the solder sponge

may be damaged.

The solder sponge

8

is used to clean soldering tips.

Moisten the solder sponge

8

before you use it.

OperationBefore first use

14 GB

Soldering

If inhaled, vapours may cause headaches and fatigue as

well as other symptoms.

— The soldering pencil has a rated output of 30 watts and is therefore

ideal for electronics soldering.

— The design of the soldering pencil makes it especially suitable for

use where access is diﬃcult or for ﬁne soldering work.

— To achieve the best results use electronics solder 1.0 or 1.5 mm

diameter 60 % Sn, 40 % Pb. We recommend the use of soldering

paste (not soldering grease or soldering ﬂuid) as a ﬂux.

Clean the soldering tip

2

on the moist solder sponge

8

.

After cleaning the tip

2

it must be “tinned” (coated with solder).

This is done by melting solder on to the hot soldering tip

2

.

Guide the soldering tip

2

to the intended joint site and heat the joint.

Place the solder (with ﬂux) between the joint site and the tip

2

to melt it.

Continue to feed further solder until the whole joint has a covering

of solder.

Then quickly remove the soldering tip in order to avoid overheating

the molten solder.

Allow the solder to harden while not subjecting it to vibration or

movement.

Note: The ﬂux is either already contained in the solder or applied

separately. Ask the advice of the retailer when buying solder in or-

der to choose the most suitable solder for your intended purpose.

Attachments and applications:

ATTENTION! Do not carry out any special changes or repairs to the

electrics or other parts. Exceptions are permitted if the person carrying

out such changes or repairs is qualiﬁed or trained to do so.

Operation / Maintenance and cleaningOperation

15 GB

You can fashion and decorate various materials with your soldering

pencil. Remove the parts of the surface or engrave design elements

into it (see Fig. D).

You can carry out these decorations in, for example, wood, leather,

paper, papier mâché, smooth fabrics, thin plastics or candle wax.

Try every application out on surplus material and see if you get the eﬀect

you wish to have. This means you will avoid damaging the item you

wish to work on.

Universal attachment

9

:

E.g. for drawings with broad and thin lines on various materials

Pointed attachment

10

:

E.g. for details or shading in over large areas

Conical attachment

11

:

E.g. for dots, curves and handwriting, detailed work

Q

Maintenance and cleaning

RISK OF INJURY! Before you carry out any

work on the device always pull the mains plug out of the mains socket

and allow the device to cool.

Clean the device after you have ﬁnished using it.

Use a cloth and a little mild detergent for cleaning the device.

In no circumstances use sharp objects, or petrol, solvents or clean-

ing agents that might attack plastic.

Do not allow any liquids to enter the inside of the device.

Operation / Maintenance and cleaningOperation

16 GB

Q

Service centre

Have your device repaired only by

qualified specialist personnel using original manufac-

turer parts only. This will ensure that your device remains safe

to use.

If the plug or mains lead needs to be

replaced, always have the replacement carried out

by the manufacturer or his service centre. This will ensure

that your device remains safe to use.

Q

Warranty

The warranty for this appliance is for 3 years from the

date of purchase. The appliance has been manufactured

with care and meticulously examined before delivery.

Please retain your receipt as proof of purchase. In the

event of a warranty claim, please make contact by tele-

phone with our Service Department. Only in this way can a

post-free despatch for your goods be assured.

The warranty covers only claims for material and maufacturing defects,

but not for transport damage, for wearing parts or for damage to frag-

ile components, e.g. buttons or batteries. This product is for private use

only and is not intended for commercial use.

The warranty is void in the case of abusive and improper handling, use

of force and internal tampering not carried out by our authorized ser-

vice branch. Your statutory rights are not restricted in any way by this

warranty.

Warranty / DisposalService centre / Warranty

17 GB

The warranty period will not be extended by repairs made unter war-

ranty. This applies also to replaced and repaired parts. Any damage

and defects extant on purchase must be reported immediately after un-

packing the appliance, at the latest, two days after the purchase date.

Repairs made after the expiration of the warranty period are subject to

payment.

GB

Service Great Britain

Tel.: 0871 5000 720

(0,10 GBP/Min.)

e-mail: k[email protected]

IAN 86586

Q

Disposal

The packaging is wholly composed of environmentally-friendly

materials that can be disposed of at a local recycling centre.

Do not dispose of electrical devices

with the household rubbish!

In accordance with European Directive 2002 / 96 / EC (covering

waste electrical and electronic equipment) and its transposition into

national legislation, worn out electrical devices must be collected

separately and taken for environmentally compatible recycling.

Contact your local refuse disposal authority for more details of how to

dispose of your worn-out devices.

Warranty / DisposalService centre / Warranty

18 GB

Q

Declaration of Conformity / Manufacturer

We, Kompernaß GmbH, the person responsible for documents:

Mr Semi Uguzlu, Burgstr. 21, D-44867 Bochum, Germany, hereby

declare that this product complies with the following standards, norma-

tive documents and EU directives:

EU Low Voltage Directive

(2006 / 95 / EC)

Electromagnetic Compatibility

(2004 / 108 / EC)

RoHS Directive

(2011 / 65 / EU)

Applicable harmonized standards

EN 60335-2-45/A1:2008

EN 60335-1/A13:2008

EN 62233:2008

EN 55014-1/A1:2009

EN 55014-2/A2:2008

EN 61000-3-2/A2:2009

EN 61000-3-3:2008

Type / Device description:

Fine soldering iron set PLBS 30 A1

Date of manufacture (DOM): 01–2013

Serial number: IAN 86586

Declaration of Conformity / ManufacturerDeclaration of Conformity / Manufacturer

19 GB

Bochum, 31.01.2013

Semi Uguzlu

- Quality Manager -

We reserve the right to make technical modiﬁcations in the course of

further development.

Declaration of Conformity / ManufacturerDeclaration of Conformity / Manufacturer

20

Popis sadržaja

Pagina se încarcă...

Parkside PLBS 30 A1 Operation and Safety Notes

Parkside PLBS 30 A1 Operation and Safety Notes

Lucrări înrudite

Alte documente