Samsung VR10R7220W1 Manual de utilizare

ART WORK SPEC

Product

Model/PJT

Changes Note: NEW

Vacuum CleanerHQ R&D PIC: Jungran Kim

Material: Wood Free 80g VR7200

Design: Hyunwoo Lim

Size: 182mm x 257mm

Page: 184 Print Color: Black Part Code DJ68-00780D

Date: 2019-03-19 Post Processing : Cut Rev No 00

POWERbot

Quick reference guide

VR20R72**** Series

• Before operating this unit, please read the instructions carefully.

• For indoor use only.

VR7200_Q_guide_13ge_00780D-00_GE.indb 1 2019-03-19 오후 5:13:57

English-2

Parts list

1

Main

body

Basic

Parts

Remote

controller

Docking

Station

Batteries

(AAA type)

Quick reference

guide

Spare lter Power cord

Battery Charger Boundary

markers

Soft Action Brush

/ Brush cover

Combo Brush /

Brush cover

 Accessories may differ depending on the models.

 Refer to page 9 for the installation of boundary markers.

 Battery Spec : Lithium-ion, 21.6V, 3600mAh, 12cell

 For VR20R726*** models, combo brush and soft action brush are provided.

VR7200_Q_guide_13ge_00780D-00_GE.indb 2 2019-03-19 오후 5:13:59

English-3

Safety information

2-1

Safety information

WARNING

• Before operating the appliance, please

read this manual thoroughly and retain

it for your reference.

WARNING

• Because these following operating

instructions cover various models, the

characteristics of your vacuum cleaner

may differ slightly from those described

in this manual.

Caution/Warning symbols used

WARNING

Indicates that a danger of death or serious

injury exists.

CAUTION

Indicates that a risk of personal injury or

material damage exists.

Other symbols used

NOTE

Indicates that the following text contains

additional important information.

Important safety instructions

When using an electrical appliance, basic

precautions should be observed, including

the following:

Read all instrucrions before using your

robot vacuum cleaner.

Unplug the charger / docking station

from outlet when not in use and before

conducting maintenance.

WARNING

To reduce the risk of re, electric

shock, or injury:

General

• Use only as described in this manual.

• Do not operate POWERbot or the

charger/docking station if it has been

damaged in any way.

• If the vacuum cleaner is not working as

it should, has been dropped, damaged,

left outdoors, or dropped in water,

return it to a customer care center.

• Do not handle the charger / docking

station or POWERbot with wet hands.

• Use only on dry, indoor surfaces.

• This appliance can be used by children

aged from 8 years and above and

persons with reduced physical, sensory

or mental capabilities or lack of

experience and knowledge if they have

been given supervision or instruction

concerning use of the appliance in a

safe way and understand the hazards

involved. Children shall not play with

the appliance. Cleaning and user

maintenance shall not be made by

children without supervision.

• If the supply cord is damaged, it must

be replaced by the manufacturer or its

service agent or a similarly qualied

person in order to avoid a hazard.

VR7200_Q_guide_13ge_00780D-00_GE.indb 3 2019-03-19 오후 5:14:00

English-4

Safety information

2-2

Charger / Docking station

• Do not modify the polarized plug to t a

non-polarized outlet or extension cord.

• Do not use outdoors or on wet surfaces.

• Unplug the charger / docking station

from the outlet when not in use and

before servicing.

• Use only the charger / docking station

supplied by the manufacturer to

recharge.

• Do not use with a damaged cord or plug

or a loose power outlet.

• Do not pull or carry by the cord, use

the cord as a handle, close the door on

the cord, or pull the cord around sharp

edges or corners. Keep the cord away

from heated surfaces.

• Do not use extension cords or outlets

with inadequate current carrying

capacity.

• Do not unplug by pulling on the cord. To

unplug, grasp the plug, not the cord.

• Do not mutilate or incinerate batteries as

they will explode at high temperatures.

• Do not attempt to open the charger /

docking station. Repairs should only be

carried out by a qualied customer care

center.

• Do not expose the charger / docking

station to high temperatures or allow

moisture or humidity of any kind to

come into contact with the charger /

docking station.

• Do not charge the non-rechargeable

batteries with the charger / docking

station.

POWERbot

• Do not pick up hard or sharp objects

such as glass, nails, screws, coins, and

etc.

• Do not use without a lter in place.

When servicing the unit, never put

ngers or other objects into the fan

chamber in case the unit accidentally

turns on.

• Do not put any objects into openings.

Do not use with any openings blocked;

keep openings free of dust, lint, hair, and

anything that may reduce air ow.

• Do not pick up toxic materials (chlorine

bleach, ammonia, drain cleaner, etc.).

• Do not pick up anything that is burning

or smoking, such as cigarettes, matches,

or hot ashes.

• Do not use to pick up ammable or

combustible liquids such as gasoline or

use in areas where they may be present.

Also do not use in:

– Locations with candles or desk lamps

on the oor.

– Locations with unattended res (re or

embers).

– Locations with distilled alcohol,

thinner, ashtrays with burning

cigarettes, etc.

• Do not use POWERbot in an enclosed

space lled with vapours given off by oil

based paint, paint thinner, moth proong

substances, ammable dust, or other

explosive or toxic vapours.

• Leaks from battery cells can occur

under extreme usage or temperature

conditions. If the liquid gets on

skin, wash quickly with water. If the

liquid gets into the eyes, ush them

immediately with clean water for a

minimum of 10 minutes. Seek medical

attention.

• For information on Samsung’s

environmental commitments and

product specic regulatory obligations

e.g. REACH visit: samsung.com/uk/

aboutsamsung/samsungelectronics/

corporatecitizenship/data_corner.html

VR7200_Q_guide_13ge_00780D-00_GE.indb 4 2019-03-19 오후 5:14:00

English-5

Safety information

2-3

WARNING

Power related

• Please prevent any risk of electric shock

or re.

– Do not damage the power cord.

– Do not pull the power cord too hard or

touch the power plug with wet hands.

– Do not use a power source other than

100-240V~ and also do not use a

multi outlet to supply power to number

of devices at the same time. (Do not

leave the cord carelessly on the oor.)

– Do not use a damaged power plug,

power cord or loose power outlet.

• Clean dust or any foreign matters on the

pin and contact part of the power plug.

– There is a risk of electric shock or

malfunction.

Before use

• Do not use POWERbot near a heater or

combustible materials.

– Do not use powerbot near re or

ame such as a movable heater, a

candlelight, a desk lamp, a replace

etc. or in a place where combustible

materials such as gasoline, alcohol,

thinner etc. exist.

• Make sure there are no dangerous

objects around the POWERbot’s cleaning

area to prevent collision and unplug any

electric heaters or fans.

• The POWERbot is intended for household

use therefore do not use it in an attic,

basement, storage, industrial building,

out of indoor space, places with moisture

(such as bathroom, laundry), on the table

or shelves.

– The POWERbot can be damaged or

malfunction.

• Be sure POWERbot does not pass

through or touch any kind of liquids.

– The POWERbot can be severely

damaged and it may contaminate other

areas if the wheels pass through liquid.

• Attach the boundary markers to places

where the POWERbot may fall such as

the top of a staircase or a bannister to

prevent product damage and injury.

– Please keep the cliff sensor clean at all

times for safety.

• Do not spill any liquids on the docking

station.

– There is a risk of re or electric shock.

• Do not use the charger / docking station

for anything other than its intended

purpose.

– There is a risk of re or severe damage

to the docking station.

• Always keep the cliff sensor clean for

your safety.

In use

• If any abnormal sounds, smells or smoke

come from POWERbot, immediately shut

off the emergency switch at the bottom

of POWERbot and contact a service

center.

Cleaning and maintenance

• When power cord is damaged, contact

a service center to get it replaced by

certied repairman.

– There is a risk of re or electric shock.

• Please check with a Samsung Electronics

service center when exchanging

batteries.

– Using batteries from other products

can cause malfunction.

CAUTION

Before use

• Insert the dustbin before using POWERbot.

• Be careful with the followings for proper

automatic recharging.

– Always turn on the power of the

docking station.

– Install the docking station where the

POWERbot can nd it easily.

– Do not leave any object in front of the

docking station.

VR7200_Q_guide_13ge_00780D-00_GE.indb 5 2019-03-19 오후 5:14:00

English-6

Safety information

2-4

• When installing the docking station, do

not leave the cord carelessly on the oor

since POWERbot may get tangled by it.

• Do not use POWERbot on black colored

oors.

– The POWERbot may not be able to

operate normally.

• Do not pick up POWERbot by the dustbin

holder.

• Do not place any objects within 0.5 m

to both sides and 1 m to the front of the

docking station.

• Make sure the docking station’s charging

contact is not damaged or have any

foreign matters on it.

• Do not install the docking station in an

area with a dark oor.

– If the oor around the docking station

is dark, recharging is hindered.

• Move any obstacles that may disturb

POWERbot’s movement (such as children’s

indoor swing or slides) before cleaning.

• Do not use the POWERbot in a place

which is narrower than the turning

radius (0.5 m or less) of the POWERbot.

• To clean all areas of your house, open all

rooms and attach the boundary markers

on the places where the POWERbot

may get damaged such as a front door,

veranda, bathroom, and stairs for safety.

• For the very low areas where the

POWERbot may get stuck, attach the

boundary markers to prevent the

POWERbot from getting in.

• If a brush or brush cover is not assembled

correctly, scratches may occur on the

oor, or product malfunction may occur.

• Before operating the POWERbot, remove

the objects which could break such as

a frame, mirror, and porcelain items

so that the POWERbot works without

interruption.

In use

• Using POWERbot on thick carpet may

damage both POWERbot and the carpet.

– The POWERbot cannot pass over carpet

that is thicker than 1 cm.

• Do not use POWERbot on tables or other

high surfaces.

– There is a risk of damage if it falls.

• The POWERbot may bump into chair,

desk legs therefore move them away for

faster and efcient cleaning.

• When POWERbot is operating, do not lift

it up or carry it to another area.

• Do not hold by driving wheels of

POWERbot when carrying it to another

area.

• Do not put any objects on top

of POWERbot since it may cause

malfunction.

• Remove any large papers or plastic bags

immediately when using POWERbot

since they may block the intake.

• Do not aim the red pointer directly at

people or animals.

• Do not lie down around the POWERBOT

that is running.

– Your hair may be caught in the brush,

resulting in physical injury.

Cleaning and maintenance

• Prevent any damage to POWERbot by

complying the followings.

– Do not clean POWERbot by spraying

water directly onto it or use benzene,

thinner, acetone or alcohol to clean it.

• Do not disassemble or repair POWERbot.

This should only be done by a certied

repairman.

• Always keep the obstacle sensor and

cliff sensor clean.

– If foreign matter accumulates, sensors

may malfunction.

VR7200_Q_guide_13ge_00780D-00_GE.indb 6 2019-03-19 오후 5:14:00

English-7

3

Charging

Charge the POWERbot fully before using for the first time.

Please install the docking station in a place

where the oor is level and wall is straight.

How to turn on the

emergency switch

Hold the robot vacuum cleaner and

turn on the emergency switch without

pressing any buttons.

"

" will turn on according to

charging progress and "FULL" will

turn on when charging is complete.

When the product is purchased, the battery is not charged, so charging must initially be done manually.

0.5 m

1 m

0.5 m

Make sure the

charge pins on the

robot vacuum cleaner

and the charger are

aligned.

Ensure the power

cord is arranged

neatly next to the

wall.

Ú Install with the grain of wood oors.

Install the charger

where the robot vacuum

cleaner can easily nd

it.

VR7200_Q_guide_13ge_00780D-00_GE.indb 7 2019-03-19 오후 5:14:02

English-8

4-1

Using the robot vacuum cleaner

Starting Auto clean mode

The POWERbot moves and

automatically cleans the set

areas only once.

Stop cleaning:

Press and release the button

Starting Spot clean mode

Press and release this button.

The POWERbot cleans a

localized area intensely.

Recharging

You can command POWERbot

to recharge at the docking

station automatically while it is

cleaning by pressing this button.

Auto Clean Spot Clean Repeat clean

Manual Clean

Manual clean mode

can be selected by the

direction control buttons

of the remote controller.

Press the [

] on the

remote controller rst

and then press the [Start/

Stop ].

 POWERbot increases suction power in Spot clean and Point cleaning mode.

VR7200_Q_guide_13ge_00780D-00_GE.indb 8 2019-03-19 오후 5:14:05

English-9

Using the robot vacuum cleaner

4-2

To prevent the POWERbot from entering the following areas, attach

the boundary markers on the oor in the shape at an interval of

about 15cm.

About 15cm

Boundary

markers

About 5cm

About 15cm

Boundary

markers

where a raised spot is below 5cm where there is a slide, swing, replace or any

ammable substance or moisture.

Above 1.5cm

boundary

markers

Boundary

markers

where a threshold is above 1.5cm where there is risk of falling such as stairs, porches

or guardrails.

About the boundary markers

VR7200_Q_guide_13ge_00780D-00_GE.indb 9 2019-03-19 오후 5:14:06

English-10

1. Power

Turn POWERbot's power on/off

2. Recharging

Select to recharge POWERbot at the docking station

automatically

3. Start/Stop

Select to start or stop cleaning process

4. Auto clean

Select to clean all set areas only once and then

automatically return to the docking station

5. Spot clean

Select to clean a localized area intensely

6. Repeat clean

Select to clean repeatedly until the battery becomes

very low with indicator blinking

7. Turbo mode

Select to clean with the strongest suction power

8. Normal mode

Select to clean with moderate suction power

9. Quiet mode

Select to clean with lower operation noise

10. Sound

Select to set the voice guide

• Voice Guide (English)  Sound Effects  Mute

• Press and hold the sound button to change and set

a language.

11. Schedule / Cancel(3sec)

Refer to page 11

12. Clock

Refer to page 11

13. Remote control

Select to turn Wi-Fi function on or off

Using the robot vacuum cleaner

4-3

2

6

8

12

10

7

13

5

9

11

3 4

1

VR7200_Q_guide_13ge_00780D-00_GE.indb 10 2019-03-19 오후 5:14:06

English-11

Setting time/schedule

Only Auto clean mode can be scheduled.

5

Setting the time

You must set the current time before using the One-time/daily schedule.

Setting the schedule

Setting/cancelling the schedule can only be done while POWERbot is docked on the docking station.

Setting complete

Start setting Select "Hour" Select "Minute"

Select "AM/PM"

Skip to previous,

next setting

Start setting

Setting complete Select "AM/PM" Select "Minute"

Select "One-time" or

"Daily" schedule

Select "Hour"

Skip to previous, next setting

Cancelling during setup

Setting will be canceled automatically when there's no input for

7seconds

Cancelling One-time/Daily schedule

When both One-time/

Daily schedule are set

or

Press for 3 sec. Select the schedule Cancel complete

When either One-time

or Daily schedule is set

Press for 3 sec.

VR7200_Q_guide_13ge_00780D-00_GE.indb 11 2019-03-19 오후 5:14:09

English-12

Cleaning and maintaining

You must turn off the emergency switch before cleaning POWERbot.

6-1

Dustbin

1

Press the button to

remove the dustbin

2

Remove the dustbin

cover

3

Remove dust in the

dustbin and cyclone

unit

'Click'

4

Detach the cyclone

unit from the dustbin

cover, and then wash

the dustbin and the

lter

5

Reassemble the

dustbin

6

Reinsert the dustbin

into the main body

until it clicks

VR7200_Q_guide_13ge_00780D-00_GE.indb 12 2019-03-19 오후 5:14:12

English-13

Cleaning and maintaining

You must turn off the emergency switch before cleaning POWERbot.

6-2

Brush and Auto shutter tool

Soft Action Brush

Combo Brush

1

Remove the

brush cover

2

Remove the

brush

3

Clean the brush

Remove remaining dirt

on the soft action brush

with a wet tissue or a

dry cloth.

4

Clean the auto

shutter tool

5

Reassemble the brush

6

Reassemble the brush cover

For VR20R726*** models, check that the brush cover

is correct for the assembled brush.

 If a brush or brush cover is not assembled correctly after the maintenance work, scratches may occur on the

oor, or product malfunction may occur. Therefore, assemble them correctly by referring to the cleaning and

maintaining section of a user manual.

Information codes

 Refer to the user manual for steps to take for each Information code with mark on the display panel.

Brush design may differ depending on the model. Do not clean the brush with water.

VR7200_Q_guide_13ge_00780D-00_GE.indb 13 2019-03-19 오후 5:14:18

English-14

Downloading the SmartThings App

f Download and install the SmartThings app from the markets (Google Play Store, Apple App

Store, or Samsung Galaxy Apps). To nd the app, use the keyword “SmartThings”.

NOTE

f SmartThings is incompatible with tablets and some mobile devices.

– Android 6.0 or later (at least 2GB of RAM) is recommended.

f iPad and some mobile devices may not be supported.

– iOS 10.0 or later / iPhone 6 or later is supported.

f Visit Play Store or App Store to see if your mobile device is compatible with SmartThings.

f The supported features are subject to change without any prior notice.

Setting up a Samsung account

f You must sign in to a Samsung account before using the SmartThings app.

f To set up a Samsung account, you can follow the directions provided by the SmartThings app.

f Or, if you have a Samsung smartphone, you can add your Samsung account in the setting app

of your smartphone. Then, it will automatically sign in to your Samsung account.

NOTE

f If you cannot complete the product registration, please take the following steps.

– Try the registration procedure again as you have directed by the pop-up messages.

– Conrm that the UPnP option of your wireless router is active, and then try the registration procedure

again.

– Conrm that your wireless router is operating in wireless mode, and then try the registration

procedure again.

– If you have two or more POWERbots, turn off the other POWERbots, and then try to register your

POWERbot again.

– If there is any other wireless router that has the same SSID as your wireless router, the registration

might be failed.

f

Remote control and Wi-Fi indicator

On

Remote control is blocked. (The remote controller can still be

allowed.)

Off Remote control is allowed.

On The POWERbot is connected to the wireless router.

Off The POWERbot is trying to connect the wireless router.

SmartThings App

The SmartThings App is only compatible with models that have a Wi-Fi

function.

7

VR7200_Q_guide_13ge_00780D-00_GE.indb 14 2019-03-19 오후 5:14:20

POWERbot

Brzi referentni vodič

Serija VR20R72****

• Pre korišćenja uređaja pažljivo pročitajte uputstva.

• Samo za upotrebu u zatvorenim prostorima.

VR7200_Q_guide_13ge_00780D-00_GE.indb 1 2019-03-19 오후 5:14:25

Srpski-2

Lista delova

1

Kućište

Osnovni

delovi

Daljinski

upravljač

Bazna

stanica

Baterije

(tip AAA)

Brzi referentni

vodič

Rezervni lter Kabl za napajanje

Punjač za bateriju Oznake granice Meka četka /

poklopac četke

Kombinovana

četka / poklopac

četke

 Dodatna oprema se može razlikovati u zavisnosti od modela.

 Pogledajte stranicu 9 da biste postavili oznake granice.

 Specikacije baterije: Litijum-jonska, 21,6 V, 3.600 mAh, 12 ćelija

 Kombinovana i meka četka su priložene uz modele VR20R726***.

VR7200_Q_guide_13ge_00780D-00_GE.indb 2 2019-03-19 오후 5:14:27

Srpski-3

Bezbednosne informacije

2-1

Bezbednosne informacije

UPOZORENJE

• Pre rukovanja uređajem pažljivo

pročitajte ovaj priručnik i sačuvajte ga

za buduću upotrebu.

UPOZORENJE

• Karakteristike vašeg modela usisivača

mogu neznatno da se razlikuju u odnosu

na one opisane u ovom priručniku jer

se ova uputstva za rukovanje odnose na

različite modele.

Korišćeni simboli za oprez/upozorenje

UPOZORENJE

Ukazuje na moguću opasnost od smrtnog

ishoda ili ozbiljnih povreda.

OPREZ

Ukazuje na moguću opasnost od telesnih

povreda ili oštećenja imovine.

Drugi simboli koji se koriste

NAPOMENA

Ukazuje na tekst koji sadrži dodatne važne

informacije.

Važna bezbednosna uputstva

Prilikom korišćenja električnog uređaja

morate se pridržavati osnovnih mera

predostrožnosti, što podrazumeva sledeće:

Pročitajte sva uputstva pre korišćenja

robot usisivača.

Isključite punjač / baznu stanicu iz

utičnice kada ne koristite uređaj, kao i pre

održavanja.

UPOZORENJE

Da biste smanjili rizik od požara,

strujnog udara i povrede:

Opšte

• Usisivač koristite isključivo prema

uputstvima iz ovog priručnika.

• Nemojte da koristite POWERbot ni

punjač/baznu stanicu ako su na bilo

koji način oštećeni.

• Ako usisivač ne radi ispravno, ako je

ispušten, oštećen, ostavljen napolju ili

ispušten u vodu, odnesite ga u centar za

korisničku podršku.

• Nemojte da koristite punjač / baznu

stanicu niti POWERbot ako su vam ruke

mokre.

• Uređaj koristite na suvim površinama u

zatvorenom prostoru.

• Uređaj mogu da koriste deca starija od

8 godina i osobe sa umanjenim zičkim,

čulnim ili psihičkim sposobnostima i

osobe koje ne poseduju odgovarajuće

iskustvo i znanje ako su pod nadzorom

ili su dobile uputstva za bezbedno

korišćenje uređaja i ako razumeju

opasnosti koje korišćenje uređaja

sa sobom nosi. Deca ne smeju da se

igraju sa uređajem. Deca ne smeju da

obavljaju čišćenje i održavanje uređaja

beznadzora.

• Ako je kabl za napajanje oštećen,

neophodno je tražiti zamenu od

proizvođača, predstavnika ovlašćenog

servisa ili slično kvalikovanog lica

kako bi se izbegla mogućnost nastanka

opasnosti.

Punjač / bazna stanica

• Nemojte da prepravljate polarizovani

utikač da biste mogli da ga uključite

u nepolarizovanu utičnicu ili produžni

kabl.

• Nemojte da koristite usisivač na

otvorenom niti na mokrim površinama.

• Isključite punjač / baznu stanicu iz

utičnice kada ih ne koristite i pre

servisiranja.

VR7200_Q_guide_13ge_00780D-00_GE.indb 3 2019-03-19 오후 5:14:28

Srpski-4

Bezbednosne informacije

2-2

• Za punjenje koristite samo punjač

/ baznu stanicu koju je isporučio

proizvođač usisivača.

• Nemojte da koristite oštećen kabl i

utikač ili utičnicu koja nije pravilno

pričvršćena na zid.

• Nemojte vući kabl niti nositi uređaj

držeći ga za kabl, koristiti kabl kao

ručku, gnječiti kabl vratima niti zatezati

kabl oko oštrih ivica ili ćoškova. Kabl

držite dalje od zagrejanih površina.

• Nemojte da koristite produžne kablove

niti utičnice koje ne mogu da podnesu

opterećenje uređaja.

• Nemojte da isključujete uređaj iz utičnice

povlačenjem kabla. Da biste ga isključili,

uhvatite utikač, ne kabl.

• Nemojte da prepravljate ili spaljujete

baterije jer mogu da eksplodiraju na

visokim temperaturama.

• Ne pokušavajte da otvorite punjač /

baznu stanicu. Popravke sme da obavlja

samo kvalikovano lice iz centra za

korisničku podršku.

• Ne izlažite punjač / baznu stanicu

visokim temperaturama i ne dozvolite

da voda ili vlaga ma koje vrste dođu u

kontakt sa punjačem / baznom stanicom.

• Baterije koje se ne mogu puniti nemojte

da punite pomoću punjača.

POWERbot

• Nemojte da usisavate čvrste niti oštre

predmete, kao što su staklo, ekseri,

zavrtnji, metalni novac itd.

• Nemojte da koristite usisivač ako nije

postavljen lter. Prilikom servisiranja

uređaja, nemojte stavljati prste

niti druge predmete u komoru sa

ventilatorom jer se uređaj može slučajno

uključiti.

• Nemojte da stavljate predmete u otvore.

Nemojte da koristite uređaj ako su otvori

začepljeni; čistite otvore od prašine,

vlakana, dlaka itd. koje mogu smanjiti

protok vazduha.

• Nemojte da usisavate toksična sredstva

(izbeljivač, amonijak, sredstvo za

odmašćivanje cevi itd.).

• Nemojte da usisavate ništa što gori ili se

dimi, kao što su cigarete, šibice ili pepeo

sa žarom.

• Usisivač ne smete da koristite za

usisavanje zapaljivih tečnosti, kao što je

benzin, niti na površinama na kojima je

prosuta takva tečnost.

Usisivač takođe nemojte da koristite u

sledećim situacijama:

– Mesta na kojima se sveće ili stone

lampe nalaze na podu.

– Mesta na kojima postoji vatra bez

nadzora (vatra ili žar).

– Mesta na kojima se nalazi destilovani

alkohol, razređivač, pepeljare sa

upaljenim cigaretama itd.

• Nemojte da koristite POWERbot

usisivač u zatvorenom prostoru u kom

su prisutna isparenja uljanih farbi,

razređivača, sredstava za zaštitu od

insekata, zapaljiva prašina i druga

eksplozivna ili toksična isparenja.

• Do curenja baterije može doći usled

prekomernog korišćenja ili pregrevanja.

Ako tečnost iz baterije dođe u dodir

sa kožom, brzo je operite vodom. Ako

tečnost iz baterije dođe u kontakt

sa očima, ispirajte ih čistom vodom

najmanje 10 minuta. Potražite pomoć

lekara.

• Za informacije o posvećenosti

kompanije Samsung zaštiti životne

sredine i regulatornim obavezama

specičnim za proizvod, npr. REACH

(Registracija, evaluacija, autorizacija

i restrikcije hemikalija), posetite

sledeću stranicu: samsung.com/uk/

aboutsamsung/samsungelectronics/

corporatecitizenship/data_corner.html

VR7200_Q_guide_13ge_00780D-00_GE.indb 4 2019-03-19 오후 5:14:28

Srpski-5

Bezbednosne informacije

2-3

UPOZORENJE

Informacije o napajanju

• Otklonite svaki rizik od strujnog udara ili

požara.

– Nemojte da oštetite kabl za napajanje.

– Nemojte da vučete kabl previše jako ili

da dodirujete utikač za struju vlažnim

rukama.

– Koristite isključivo izvor napajanja

od 100-240 V naizmenične struje i

nemojte da koristite produžni kabl sa

više utičnica za istovremeno napajanje

više uređaja. (Nemojte da ostavljate

kabl na podu.)

– Nemojte da koristite oštećeni utikač

i kabl ili utičnicu koja nije pravilno

pričvršćena na zid.

• Očistite prašinu i uklonite sva strana tela

sa kontakata na utikaču.

– Postoji opasnost od strujnog udara ili

kvara.

Pre korišćenja

• Nemojte da koristite POWERbot u blizini

grejalice ili zapaljivih materijala.

– Nemojte da koristite POWERbot blizu

izvora toplote ili plamena kao što

je pokretna grejalica, sveća, stona

lampa, kamin itd. ili na mestu na kom

se nalaze zapaljivi materijali poput

benzina, alkohola, razređivača itd.

• Postarajte se da u blizini područja

čišćenja usisivača POWERbot nema

opasnih predmeta da biste sprečili sudar

i isključivanje električnih grejalica ili

ventilatora.

• POWERbot namenjen je za upotrebu

u domaćinstvu i ne sme se koristiti za

čišćenje tavana, podruma, skladišta,

industrijskih objekata, izvan zatvorenog

prostora, na mestima sa vlagom (kao

što je kupatilo, perionica), na stolu ili na

policama.

– POWERbot može da se ošteti ili da se

pokvari.

• Vodite računa da POWERbot ne prođe

kroz ili ne dodirne bilo kakve tečnosti.

– POWERbot može ozbiljno da se ošteti

i može da zaprlja druga područja ako

točkići prođu kroz tečnost.

• Pričvrstite oznake granice na mestima na

kojima POWERbot može pasti kao što su

vrh stepenica ili ograda da biste sprečili

oštećenje proizvoda i povrede.

– Senzor za kosine održavajte čistim sve

vreme radi bezbednosti.

• Ne prosipajte tečnost na baznu stanicu.

– Postoji opasnost od požara ili strujnog

udara.

• Punjač / baznu stanicu koristite samo za

predviđenu namenu.

– Postoji opasnost od požara ili ozbiljnog

oštećenja bazne stanice.

• Radi sopstvene bezbednosti, redovno

čistite senzor za kosine.

Tokom korišćenja

• Ako se iz usisivača POWERbot čuju

čudni zvukovi, osećaju mirisi ili izlazi

dim, odmah ga isključite pritiskom na

prekidač za napajanje koji se nalazi

sa donje strane usisivača POWERbot i

obratite se servisnom centru.

Čišćenje i održavanje

• Ako je kabl oštećen, obratite se

servisnom centru kako bi ga popravio

ovlašćeni majstor.

– Postoji opasnost od požara ili strujnog

udara.

• Konsultujte se sa servisnim centrom

kompanije Samsung Electronics prilikom

zamene baterija.

– Ako koristite baterije iz drugih

proizvoda, uređaj se može pokvariti.

OPREZ

Pre korišćenja

• Pre korišćenja usisivača POWERbot

postavite posudu za prašinu.

VR7200_Q_guide_13ge_00780D-00_GE.indb 5 2019-03-19 오후 5:14:28

Pagina se încarcă...

Samsung VR10R7220W1 Manual de utilizare

Acest manual este potrivit și pentru

Samsung VR10R7220W1 Manual de utilizare

în alte limbi

Lucrări înrudite

Alte documente