Yamaha YST-MS50 Manual de utilizare

Categorie
Boxe soundbar
Tip
Manual de utilizare

Acest manual este potrivit și pentru

POWERED MULTIMEDIA SPEAKERS
YST-MS50
UCA
OWNER’S MANUAL
MODE D’EMPLOI
B
A
S
S
0
1
0
S
P
E
A
K
E
R
S
M
U
L
T
IM
E
D
IA
P
O
W
E
R
E
D
Y
S
T
-M
S
5
0
P
O
W
E
R
E
D
M
U
L
T
I
M
E
D
I
A
S
P
E
A
K
E
R
S
V
O
L
U
M
E
Explanation of Graphical Symbols
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
CAUTION
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
IMPORTANT
Please record the serial number of this system in the
space below.
Model:
Serial No.:
The serial number is located on the rear of the main
unit.
Retain this Owner’s Manual in a safe place for future
reference.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
i
SAFETY INSTRUCTIONS
1 Read Instructions – All the safety and operating
instructions should be read before the product is
operated.
2 Retain Instructions – The safety and operating
instructions should be retained for future reference.
3 Heed Warnings – All warnings on the product and in
the operating instructions should be adhered to.
4 Follow Instructions – All operating and use instructions
should be followed.
5 Cleaning – Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6 Attachments – Do not use attachments not
recommended by the product manufacturer as they
may cause hazards.
7 Water and Moisture – Do not use this product near
water – for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or near
a swimming pool; and the like.
8 Accessories – Do not place this product on an unstable
cart, stand, tripod, bracket, or table. The product may
fall, causing serious injury to a child or adult, and
serious damage to the product. Use only with a cart,
stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting of
the product should follow the manufacturer’s
instructions, and should use a mounting accessory
recommended by the manufacturer.
9 A product and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the product and cart
combination to overturn.
10 Ventilation – Slots and openings in the
cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from
overheating, and these openings must not be blocked
or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar
surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s
instructions have been adhered to.
11 Power Sources – This product should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to
your home, consult your product dealer or local power
company. For products intended to operate from
battery power, or other sources, refer to the operating
instructions.
12 Grounding or Polarization – This product may be
equipped with a polarized alternating current line plug
(a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
13 Power-Cord Protection – Power-supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
product.
14 Lightning – For added protection for this product during
a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system.
This will prevent damage to the product due to lightning
and power-line surges.
15 Power Lines – An outside antenna system should not
be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken
to keep from touching such power lines or circuits as
contact with them might be fatal.
16 Overloading – Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
17 Object and Liquid Entry – Never push objects of any
kind into this product through openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid
of any kind on the product.
18 Servicing – Do not attempt to service this product
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
19 Damage Requiring Service – Unplug this product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen
into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician to
restore the product to its normal operation,
e) If the product has been dropped or damaged in
any way, and
f) When the product exhibits a distinct change in
performance - this indicates a need for service.
20 Replacement Parts – When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.
21 Safety Check – Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product is
in proper operating condition.
22 Wall or Ceiling Mounting – The unit should be mounted
to a wall or ceiling only as recommended by the
manufacturer.
23 Heat – The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
ii
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party:
Address:
Telephone:
FAX:
Type of Equipment:
Model Name:
Yamaha Corporation of America
6600 Orangethorpe Ave.
Buena Park, CA90622
714-522-9011
714-527-5782
Powered Multimedia Speaker
YST-MS50
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference that may cause undesired operation.
See user manual instructions if interference to radio reception is suspected.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s
Consumer Electronics Group want you to get the most
out of your equipment by playing it at a safe level. One
that lets the sound come through loud and clear without
annoying blaring or distortion – and, most importantly,
without affecting your sensitive hearing.
Since hearing damage from loud sounds
is often undetectable until it is too late,
YAMAHA and the Electronic Industries
Association’s Consumer Electronics
Group recommend you to avoid prolonged
exposure from excessive volume levels.
FCC INFORMATION (U.S.A)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications
not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B”
digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a
residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses
radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference
harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will
not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the
product “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the
lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this
type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America 6600 Orangetho-
rpe Ave. Buena Park, CA90622, U.S.A.
FOR CANADIAN CUSTOMERS
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT AND FULLY INSERT.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH
CANADIAN ICES-003.
POUR LES CONSOMMATEURS CANADIENS
POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRO-
DUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE ET
POUSSER JUSQU’AU FOND.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST
CONFORME À LA NORME NMB-003 DU CANADA.
Connection / Connexion
SATELLITE
LEFT
SPEAKER
SUBWOOFER
SATELLITE
RIGHT
SPEAKER
1
2
3
BASS
0
10
POWERED MULTIMEDIA SPEAKERS YST-MS50
POWERED MULTIMEDIA SPEAKERS
TO RIGHT
SPEAKER
TO LEFT
SPEAKER
VOLUME
TO
SUB Wo.
INPUT 1
INPUT 2
TO
SUB Wo.
AC cord
(To AC outlet)
1 3.5 mm stereo mini plug cable (Accessory) / Câble avec fiches mini-jack stéréo 3,5 mm (Accessoire)
2 8 pin plug cable (Accessory) / Câble avec connecteur à 8 broches (Accessoire)
3 RCA pin plug cable (Accessory) / Câble RCA/Cinch (Accessoire)
Controls & Connectors / Commandes et Connecteurs
BASS
0
10
INPUT 1
INPUT 2
TO
SUB Wo.
TO RIGHT
SPEAKER
TO LEFT
SPEAKER
1
3 4
2
8
9
0
SUBWOOFER FRONT SUBWOOFER REAR
SATELLITE RIGHT SPEAKER FRONT
SATELLITE RIGHT SPEAKER REAR
SATELLITE LEFT SPEAKER REAR
TO
SUB Wo.
VOLUME
5 76
POWER
OFF ON
1
2
English
Thank you for purchasing Yamaha’s YST-MS50 Powered Multimedia Speakers. Advanced Yamaha Active Servo
Technology offers exceptionally high performance, allowing these compact speakers to produce a rich bass sound.
Cautions
Please read the following operating precautions before
use:
When you disconnect the AC power cable from an
AC outlet, hold the plug, not the cord.
If the YST-MS50s are not going to be used for a
while, disconnect the AC power cord from the AC
receptacle.
Always disconnect the AC power cord from the AC
receptacle before making any connections.
The YST-MS50s do not contain any user serviceable
parts. Refer all servicing to your Yamaha dealer.
Never open the cabinet.
If a foreign object drops
into the set, contact your dealer, and do not use the
YST-MS50s. Otherwise, you may cause a re.
Do not expose the YST-MS50s to temperature
extremes, direct sunlight, excessive dust, humidity,
or vibration.
Position the YST-MS50s on a level, stable surface.
Do not drop the YST-MS50s, apply excessive force
to their controls, or put heavy items on top of them.
Since this unit has a built-in power amplier, heat
will radiate from the rear panel. Therefore, place
the unit away from walls, allowing a space of at
least 20 cm (7.9") above, and 10 cm (4") behind and
at the sides. Also, do not position with the rear
panel facing down on the oor or other surface.
(Subwoofer only)
Do not obstruct the port with your hand or a foreign
object.
To protect the YST-MS50 speakers, avoid micro-
phone feedback, continuous and excessive output
from electronic musical instruments, and excessive
signal distortion.
If the YST-MS50s are located close to uorescent
or neon lights, a slight hum may be heard. In this
case, relocate the YST-MS50s away from the light.
Although the YST-MS50 speakers are magnetically
shielded, keep oppy disks and tapes away from
them.
The YST-MS50s may cause picture distortion when
located close to a television or computer monitor. In
this case, move them away a short distance.
Avoid sources of hum (transformers, motors). To
prevent re or electrical shock, do not expose to
rain and water.
Do not use force on switches, knobs, or cables.
When you move the YST-MS50, rst turn off the
power to the speakers, then disconnect the power
cable from the AC outlet and the cables from the
connected devices.
Always turn the volume control counterclockwise
to the minimum before starting to play the audio
source: increase the volume gradually to an appro-
priate level after the playback has started.
Do not turn off the POWER switch on the sub-
woofer while the (standby/on) button on the
front panel of the right satellite speaker is on (while
the standby/on indicator is lit). Otherwise, the
speakers may be damaged.
Note for headphone:
When you use headphones, make sure that they have a
cable of less than 3m. (UK and Europe models)
Connections & Controls
Refer to the illustrations on page 1.
1
BASS control:
Use this control to adjust the vol-
ume of the subwoofer. We recommend that the
control be set to the 12 or 1-oclock position. Turn
it clockwise to increase the volume; counterclock-
wise to decrease it.
2
Main POWER switch:
Normally, leave this
switch in the ON position. When you will not use
this unit for a long period of time, set this switch to
the OFF position.
3
TO RIGHT SPEAKER:
Using the 8 pin plug
cable, connect this jack to the TO SUB Wo. jack on
the satellite right speaker.
4
TO LEFT SPEAKER:
Using the RCA pin plug
cable, connect this jack to the TO SUB Wo. jack on
the satellite left speaker.
5
(standby/on) button and indicator:
Press the
(standby/on) button to turn on the YST-MS50s;
the standby/on indicator lights up. Press again to
turn off. Turn down the VOLUME control before
turning on and off the YST-MS50s.
A small amount of power is always consumed even
while the YST-MS50s are on standby.
6
(Headphone):
A pair of stereo headphones can
be connected here for private listening. The YST-
MS50 speakers do not produce sound when head-
phones are connected to this jack.
7
VOLUME control:
Use this control to adjust the
volume of the left and right speakers. Turn it clock-
wise to increase the volume; counterclockwise to
decrease it.
8
INPUT 1 and 2:
These 3.5 mm stereo mini jacks
are used to input signals independently to the YST-
MS50. You can, for example, connect a CD player
and personal computer to these jacks. The signals
from these jacks are mixed together.
9
TO SUB Wo. (on the right):
Using the 8 pin plug
cable, connect this jack to the TO RIGHT
SPEAKER on the subwoofer.
0
TO SUB Wo. (on the left):
Using the RCA pin
plug cable, connect this jack to the TO LEFT
SPEAKER jack on the subwoofer.
3
Non skid pad
To prevent the speakers from sliding around, attach the supplied pads to the four points
on the bottom of each satellite speaker. Place the speaker on a stable, flat surface.
Specifications
Type
.......................... Advanced Active Servo Technology
Output power
Satellite speakers...... 20 W + 20 W (1 kHz, 4
at
T.H.D.=10%)
Subwoofer................40 W (100 Hz, 5
at T.H.D.=10%)
Input sensitivity
.................200 mV (1 kHz, 4
at 20 W)
Input impedance
...............25 k
Frequency response
...........32 Hz to 20 kHz
Speaker unit
Satellite speakers
Tweeter................ 19 mm (3/4") dome, magnetic shielding
Midrange ...........8 cm (3") cone, magnetic shielding
Subwoofer..................16 cm (6.5") cone, magnetic shielding
Power consumption
...........65W
Power supply
U.S.A. and Canada models....AC 120 V, 60 Hz
Australia model....................AC 240 V, 50 Hz
U.K. and Europe models......AC 230 V, 50 Hz
Dimensions (W
×
H
×
D)
Satellite speakers......97 (3.8")
×
159 (6.3")
×
178 (7") mm
Subwoofer.................350 (13.8")
×
210 (8.3")
×
321
(12.6") mm
Weight
Satellite speakers......0.7 kg (1 lb. 9 oz.)
×
2
Subwoofer.................8.0 kg (17 lbs. 10 oz.)
Finish
YST-MS50 W...........Computer white
YST-MS50 B............Black
Accessories
3.5 mm stereo mini plug cable
×
1 (1.8m), RCA pin plug
cable
×
1 (1.8m), 8 pin plug cable
×
1 (1.8m), 8 pcs of non
skid pads
×
1
* Specifications subject to change without notice.
Troubleshooting
If the speakers fail to operate normally, check the following table. It lists common operation errors and simple mea-
sures that you can take to correct problems. If a problem cannot be corrected, or the symptom is not listed, discon-
nect the AC power cord and contact your authorized YAMAHA dealer or service center for help.
Even if the (standby/on) button is turned off, a small amount of sound may be heard from the headphones if
the VOLUME control is set to max. This is normal.
FAULT CAUSE CURE
No sound comes
from the speakers or
subwoofer.
The AC power cord is not properly plugged
into the wall outlet.
Insert the AC power cord firmly into the wall outlet.
The main power switch on the subwoofer is
set to OFF.
Set the main power switch to ON.
The (standby/on) button is turned off. Turn on the (standby/on) button (the indicator
lights).
Connections are faulty or incomplete. Make the connections again, firmly, or use a differ-
ent cable.
The volume is set to minimum. Turn the speaker VOLUME control to the right to
increase the volume.
Turn the subwoofer VOLUME control to the right to
increase the volume.
The level of the signal being input is too low. Turn up the volume on the connected component.
Headphones are connected. Disconnect the headphones.
Sound is distorted. The level of the signal being input is too high. Turn down the volume on the connected component.
Noise. Connections are faulty or incomplete. Make the connections again, firmly, or use a differ-
ent cable.
Noise is heard when
the power is turned
on.
The power cord of this unit connected to
another unit’s SWITCHED AC OUTLET.
Connect the power cord to an UNSWITCHED AC
OUTLET.
Make sure to use the (standby/on) button on
this unit to turn on and off.
5
Pieds anti-dérapage
Pour éviter que les baffles glissent, nous vous conseillons de fixer les pieds anti-dérapage
aux quatre coins de la face inférieure des baffles satellites. Placez le baffle sur une sur-
face stable et plate.
Fiche technique
Type .........................Advanced Active Servo Technology
Puissance de sortie
Baffles satellites
20 W + 20 W (1 kHz, 4 avec une dist. harm. =10%)
Subwoofer
40 W (100 Hz, 5 avec une dist. harm. =10%)
Sensibilité d’entrée...............200 mV (1 kHz, 4 à 20 W)
Impédance d’entrée..............25 k
Réponse en fréquence ..........32 Hz à 20 kHz
Haut-parleur
Baffles satellites
Tweeter.... Dôme de 19 mm (3/4"), blindage magnétique
Medium... Cône de 8 cm (3"), blindage magnétique
Subwoofer... Cône 16 cm (6,5"), protection magnétique
Consommation........65 W
Alimentation
Modèle pour les E.U. et le Canada ..... AC 120 V, 60 Hz
Modèle pour l’Australie...................... AC 240 V, 50 Hz
Modèle pour le R.U. et l’Europe......... AC 230 V, 50 Hz
Dimensions (L × H × P)
Baffles satellites
97 (3,8") × 159 (6,3") × 178 (7") mm
Subwoofer
350 (13,8") × 210 (8,3") × 321 (12.6") mm
Poids
Baffles satellites .......0,7 kg (1 lb. 9 oz.) × 2
Subwoofer................8,0 kg (17 lbs. 10 oz.)
Finition
YST-MS50 W...........Blanc ordinateur
YST-MS50 B............Noire
Accessoires
Câble avec fiches mini-jack stéréo 3,5mm × 1 (1,8m), Câble
RCA/Cinch × 1 (1,8m), câble avec connecteur à 8 broches ×
1 (1,8m), jeu de 8 patins anti-dérapants × 1
* Spécification sujettes à modifications sans préavis.
En cas de problème
Si les enceintes ne fonctionnent pas normalement, passez le tableau suivant au crible. Il reprend les erreurs de mani-
pulations les plus communes, auxquelles il est fort simple de remédier. Si votre problème n’y trouve pas de solution
ou si vous n’y trouvez pas les symptômes, débranchez le cordon d’alimentation et contactez un revendeur ou un cen-
tre de service après-vente YAMAHA autorisé.
Même lorsque le commutateur (standby/alimentation) est coupé, il est possible d’entendre un faible son dans le casque si la
commande VOLUME
est au maximum. C’est normal.
PROBLEME CAUSE REMEDE
Les enceintes
et le subwoofer
restent muets.
Le cordon d’alimentation n’a pas été cor-
rectement branché.
Branchez correctement le cordon d’alimentation à une
prise secteur.
L’interrupteur principal sur le subwoofer
est sur OFF.
Réglez l’interrupteur principal sur ON.
Le commutateur (standby/alimentation)
est coupé.
Appuyez sur le commutateur (standby/alimentation)
pour mettre l’appareil sous tension (le témoin s’allume).
Connexions mauvaises ou incomplètes. Vérifiez les connexions et changez éventuellement les
câbles.
La commande volume se trouve sur le
niveau minimum.
Tournez la commande VOLUME des enceintes vers la
droite pour augmenter le niveau.
Tournez la commande VOLUME du subwoofer vers la
droite pour augmenter le niveau.
Le niveau de sortie du signal est trop bas. Augmentez le volume de l’appareil externe.
Vous avez branché un casque. Débranchez le casque.
Il y a distorsion
du signal.
Le niveau du signal entrant est trop élevé. Diminuez le volume de l’appareil externe.
Bruit. Connexions mauvaises ou incomplètes. Vérifiez les connexions et changez éventuellement les
câbles.
Il y a du bruit
lors de la mise
sous tension.
Le cordon d’alimentation est branché au
connecteur SWITCHED AC OUTLET d’un
autre appareil.
Branchez le cordon d’alimentation à une borne
UNSWITCHED AC OUTLET. Veillez à utiliser le com-
mutateur
(standby/alimentation) du YST-MS50 pour
le mettre sous et hors tension.
Printed in China V836340
IP
1 / 1

Yamaha YST-MS50 Manual de utilizare

Categorie
Boxe soundbar
Tip
Manual de utilizare
Acest manual este potrivit și pentru