Yamaha YST-M8 Manual de utilizare

Marca: Yamaha

Model: YST-M8

Categorie: Boxe soundbar

Tip: Manual de utilizare

Acest manual este potrivit și pentru

YSTM8

POWERED MULTIMEDIA SPEAKERS

YST-M8

Active Servo

Technology

Active Servo

Technology

VOLUME

TONE

UCA

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert you to the

presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert you to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

OWNER’S MANUAL / MODE D’EMPLOI

English .............................. 4

Français ............................ 9

SAFETY INSTRUCTIONS

1 Read Instructions — All the safety and operating instructions

should be read before the unit is operated.

2 Retain Instructions — The safety and operating instructions

should be retained for future reference.

3 Heed Warnings — All warnings on the unit and in the operating

instructions should be adhered to.

4 Follow Instructions — All operating and other instructions

should be followed.

5 Water and Moisture — The unit should not be used near water –

for example, near a bathtub, washbowl, kitchen sink, laundry

tub, in a wet basement, or near a swimming pool, etc.

6 Carts and Stands — The unit should be

used only with a cart or stand that is

recommended by the manufacturer.

6A An unit and cart combination should be

moved with care. Quick stops, excessive

force, and uneven surfaces may cause the

unit and cart combination to overturn.

7 Wall or Ceiling Mounting — The unit should be mounted to a

wall or ceiling only as recommended by the manufacturer.

8 Ventilation — The unit should be situated so that its location or

position does not interfere with its proper ventilation. For

example, the unit should not be situated on a bed, sofa, rug, or

similar surface, that may block the ventilation openings; or

placed in a built-in installation, such as a bookcase or cabinet

that may impede the flow of air through the ventilation openings.

9 Heat — The unit should be situated away from heat sources

such as radiators, stoves, or other appliances that produce heat.

10 Power Sources — The unit should be connected to a power

supply only of the type described in the operating instructions or

as marked on the unit.

11 Power-Cord Protection — Power-supply cords should be routed

so that they are not likely to be walked on or pinched by items

placed upon or against them, paying particular attention to

cords at plugs, convenience receptacles, and the point where

they exit from the unit.

12 Cleaning — The unit should be cleaned only as recommended

by the manufacturer.

13 Nonuse Periods — The power cord of the unit should be

unplugged from the outlet when left unused for a long period of

time.

14 Object and Liquid Entry — Care should be taken so that objects

do not fall into and liquids are not spilled into the inside of unit.

15 Damage Requiring Service — The unit should be serviced by

qualified service personnel when:

A. The power-supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the unit; or

C. The unit has been exposed to rain; or

D. The unit does not appear to operate normally or exhibits a

marked change in performance; or

E. The unit has been dropped, or the enclosure damaged.

16 Servicing — The user should not attempt service the unit

beyond those means described in the operating instructions. All

other servicing should be referred to qualified service personnel.

17 Power Lines — An outdoor antenna should be located away

from power lines.

18 Grounding or Polarization — Precautions should be taken so

that the grounding or polarization is not defeated.

FCC INFORMATION (for US customers only)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product,

when installed as indicated in the instructions contained in this manual,

meets FCC requirements. Modifications not expressly approved by

Yamaha may void your authority, granted by the FCC, to use the

product.

2. IMPORTANT: When connecting this product to accessories and/or

another product use only high quality shielded cables. Cable/s supplied

with this product MUST be used. Follow all installation instructions.

Failure to follow instructions could void your FCC authorization to use

this product in the USA.

NOTE: This product has been tested and found to comply with the

requirements listed in FCC Regulations, Part 15 for Class “B” digital

devices. Compliance with these requirements provides a reasonable level

of assurance that your use of this product in a residential environment will

not result in harmful interference with other electronic devices.

This equipment generates/uses radio frequencies and, if not installed

and used according to the instructions found in the users manual, may

cause interference harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that interfer-

ence will not occur in all installations. If this product is found to be the

source of interference, which can be determined by turning the unit

“OFF” and “ON”, please try to eliminate the problem by using one of

the following measures:

Relocate either this product or the device that is being affected by the

interference.

Utilize power outlets that are on different branch (circuit breaker of

fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna.

If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to

coaxial type cable.

If these corrective measures do not produce satisfactory results, please

contact the local retailer authorized to distribute this type of product. If

you can not locate the appropriate retailer, please contact Yamaha

Corporation of America, 6600 Orangethorpe Ave, Buena Park, CA 90620

The above statement apply ONLY to those products distributed by

Yamaha Corporation of America or its subsidiaries.

FOR CANADIAN CUSTOMERS

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

POUR LES CONSOMMATEURS CANADIENS

POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE

DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À LA NORME NMB-003 DU CANADA.

YAMAHA and the Electronic Industries Association’s

Consumer Electronics Group want you to get the most out of

your equipment by playing it at a safe level. One that lets the

sound come through loud and clear without annoying blaring

or distortion – and, most importantly, without affecting your

sensitive hearing.

Since hearing damage from loud sounds is

often undetectable until it is too late,

YAMAHA and the Electronic Industries

Association’s Consumer Electronics Group

recommend you to avoid prolonged exposure

from excessive volume levels.

WARNING

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE

THIS UNIT TO RAIN OR MOISTURE.

We Want You Listening For A Lifetime

System Example / Exemple de connexion

PORTABLE CD PLAYER / LECTEUR DE CD PORTATIF

KEYBOARD / CLAVIER / KEYBOARD

CD-ROM PLAYER / LECTEUR DE CD ROM

PERSONAL COMPUTER / ORDINATEUR INDIVIDUEL

SUBWOOFER / HAUTEUR PARLEUR D’EXTREME-GRAVE

3.5 mm stereo mini plug cable / Câble à minifiches stéréo 3,5 mm

RCA plug cable / Câble à fiches RCA

AC Adaptor / Adaptateur CA

The AC adaptor varies depending on the country of destination. / Le modèle de l’adaptateur secteur dépend du pays de destination.

MADE IN CHINA

RIGHT

SPEAKER

SER. NO.

POWERED SPEAKER

MODEL NO. YST-M8

INPUT 1

INPUT 2

LEFT

SPEAKER

OUTPUT

(ADJ.VOL.)

DC 12V

SER. NO.

MADE IN CHINA

POWERED SPEAKER

MODEL NO. YST-M8

BASS VOLUME

POWERED MULTIMEDIA SUBWOOFER YST-MSW8

010010

Front & Rear Panel / Face et Face arrière

MADE IN CHINA

INPUT 1

INPUT 2

LEFT

SPEAKER

OUTPUT

(ADJ.VOL.)

DC 12V

MADE IN CHINA

RIGHT

SPEAKER

SER. NO.

POWERED MULTIMEDIA

SPEAKERS

MODEL NO. YST-M8

SER. NO.

POWERED MULTIMEDIA

SPEAKERS

MODEL NO. YST-M8

VOLUME

TONE

Cautions

Please read the following operating precautions before use:

• Use the AC adaptor designed specifically for the YST-M8 only. Yamaha

cannot be held responsible for damage caused by using other power supply

adaptors.

• When disconnecting the AC adaptor from an AC receptacle, hold and pull the

adaptor, not the power cord.

• If the YST-M8 are not going to be used for a while, disconnect the AC adaptor

from the AC receptacle.

• Always disconnect the AC adaptor from the AC receptacle before making any

connections.

• YST-M8 do not contain any user serviceable parts. Refer all servicing to your

Yamaha dealer.

• Do not expose the YST-M8 to temperature extremes, direct sunlight, excessive

dust, humidity, or vibration.

• Place the YST-M8 on a level, stable surface. Do not drop the YST-M8, apply

excessive force to their controls, or put heavy items on top of them.

• If the YST-M8 should require cleaning, use a soft cloth. If necessary, use a

damp cloth.

• To protect the YST-M8 speakers, avoid microphone feedback, continuous and

excessive output from electronic musical instruments amplifiers signal

distortion.

• If the YST-M8 are located close to fluorescent or neon type lights, a slight

hum may be heard. In this case, relocate the YST-M8 away from the light.

• Although the YST-M8 speakers are magnetically shielded, keep floppy disks

and tapes away from them.

• The YST-M8 may cause picture distortion when placed close to a television or

computer monitor. In this case, move them away a little.

Thank you for purchasing Yamaha’s YST-M8 Powered Multimedia Speakers. Yamaha’s Active Servo Technology offers

exceptional high performance.

This unit is not disconnected from the AC power source as long as

it is connected to the wall outlet, even if this unit itself is turned off.

This state is called the standby mode.

In this state, this unit is designed to consume a very small quantity

of power.

Connections

Refer to page 4 for system connections.

Rear Panel (right cabinet) (Refer to page 5)

1 INPUT 1 and 2: These are 3.5 mm jack connections for inputting signals to

the YST-M8. Using these two inputs will mix two input signals.

For example, you may connect your CD-ROM player and personal computer

to these input terminals.

2 TO LEFT SPEAKER: This should be connected to the TO RIGHT

SPEAKER connection on the left-channel cabinet using the supplied RCA

plug cable.

3 OUTPUT (ADJ. VOL.): This 3.5 mm stereo jack outputs the input signal

after the VOLUME control.

4 DC 12V: Connect the supplied AC adaptor to this connection.

Rear Panel (left cabinet)

5 TO RIGHT SPEAKER: This should be connected to the TO LEFT

SPEAKER connection on the right cabinet using the supplied RCA plug cable.

Specifications

Type Active Servo Technology

Output power 5 W + 5 W (1 kHz, 4 Ω)

Input sensitivity 200 mV (1 kHz, 4 Ω at 5 W)

Input Impedance 25 kΩ

Frequency response 80 Hz to 20 kHz

Speaker unit

6.5 cm (2.5") full-range cone, magnetic shielding

Output Impedance 600 Ω

Output level 0.9 V (at 200 mV Rated Input)

Power supply DC 12 V

U.S.A. and Canada models AC 120 V, 60 Hz

Europe and U.K. models AC 230 V, 50 Hz

Australia model AC 240 V, 50 Hz

Dimensions (W×H×D) 86 (3

") × 216 (8

") × 130 (5

") mm

Weight 0.7 kg (1 lb 9 oz.)/Right channel unit

0.6 kg (1 lb 5 oz.)/Left channel unit

Finish YST-M8 W: Computer white

YST-M8 B: Black

Accessories AC adaptor × 1

3.5 mm stereo mini plug cable × 1

RCA plug cable × 1

8 non skid pads × 1

* Specifications subject to change without notice.

Non skid Pads

The pads supplied with the YST-M8 should be stuck onto

the bottom of each speaker cabinet as shown. As well as

preventing the YST-M8 from slipping around, these pads

also isolate the cabinet from the mounting surface.

Controls

Front Panel (right cabinet) (Refer to page 5)

6 (power) switch and indicator: Press the (power) switch to turn on the

YST-M8; the indicator will light up. Press it again to turn off. Before

turning on and off, turn down the VOLUME control.

7 VOLUME control: Use this control to set the volume level. Turn it clockwise

to increase the volume, and counterclockwise to reduce it.

8 TONE control: This control allows frequency boost and cut up to ±7 dB at

10 kHz. This tends to emphasize vocals, providing a warmer intimate sound.

Turn it clockwise to boost, and counterclockwise to cut.

9 (headphones) jack: Use this jack to connect stereo headphones for

monitoring. No sound is output from the speakers or the OUTPUT

(ADJ.VOL.) jack when headphones are connected.

English

Troubleshooting

If your speakers fail to operate normally, check the following table. It lists common operating errors and simple measures which you can take to correct the problem. If it

cannot be corrected, or the symptom is not listed, disconnect the speaker’s AC adaptor and contact your authorized YAMAHA dealer or service center for help.

FAULT

No sound comes from one, or both of

the speakers.

No sound comes from the unit

connected to the OUTPUT (ADJ.VOL.)

jack on the rear panel.

Sound is distorted.

Noise is heard when the power is

turned on.

Noise.

CURE

• Insert the AC adaptor firmly into the wall outlet.

• Turn ON the (power) switch (the indicator lights).

• Make the connections again, firmly, or use a different

cable.

• Turn VOLUME control to the right to increase the

volume.

• Turn up the volume on the connected component.

• Disconnect the headphones.

• Turn down the volume on the connected component.

• Connect the power cord to an UNSWITCHED AC

OUTLET.

Make sure to use the (power) switch on this unit to

turn on and off.

• Make the connections again, firmly, or use a different

cable.

CAUSE

• The AC adaptor is not properly plugged in to the wall

outlet.

• The (power) switch is turned OFF.

• Connections are faulty or incomplete.

• The volume is set to minimum.

• The signal being input is too small.

• Headphones are connected.

(No sound comes from the OUTPUT jack when

headphones are connected.)

• The signal being input is too large.

• The power cord of this unit is connected to another

unit’s SWITCHED AC OUTLET.

• Connections are faulty or incomplete.

• Even if the (power) switch is set to off, a small amount of sound may be heard from the headphones if the VOLUME control is turned fully clockwise to the

maximum position.