Tellur TLL331281 Manual de utilizare

Marca: Tellur

Model: TLL331281

Categorie: Detectoare de fum

Tip: Manual de utilizare

Acest manual este potrivit și pentru

TLL331281 Wi-Fi Smoke Sensor

Wi-Fi Smoke Sensor

User Manual

TLL331281

For other languages, please visit smart.tellur.com

Thank you for choosing Tellur!

To ensure an optimum performance and safety, please read this user manual

carefully before using the product. Keep this user manual safe for future

references.

WHAT’S IN THE BOX

Please consult this checklist for all parts.

1 x Tellur Smoke sensor

1 x CR123A battery

1 x 3M tape

2 x Screws

2 x Tapping screws

Tellur Smoke sensor

Screws Tapping screws

3M tape CR 123A battery

User manual

1.PRODUCT OVERVIEW

Increase your sense of security with Tellur's WiFi Smart Smoke Sensor.

Having an intelligent double-checking algorithm, the device senses smoke

and temperature changes and triggers the alarm.

When it detects smoke, the sensor alerts you through an acoustic alarm, a

light indicator and a push notiﬁcation is sent to your smartphone. You will

also be notiﬁed on your smartphone when the batteries are running low or

when someone tries to dismount the device.

The WiFi Smart Smoke Sensor works with a CR123A DC 3V battery

(included) and has a low energy consumption.

The sensor integrates perfectly in the Smart Home ecosystem and allows

you to check its working status and history records by simply accessing the

Tellur Smart app from your smartphone.

2.PRODUCT FEATURES

Detects smoke & temperature change and triggers the alarm.

Multiple types of alarms: light indicator, high-decibel acoustic alarm & push

notiﬁcation.

Low battery & tamper notiﬁcations.

Compatible with Tellur Smart app, perfectly integrated in the Smart Home

ecosystem.

Works with a CR123A DC 3V battery (included) with low energy consumption.

Working in 802.11 b/g/n 2.4GHz wireless network (no hub required).

WiFi network conﬁguration with EZ (Smart Conﬁg) and AP (Access Point)

mode.

Share the device with your family.

Mounting with adhesive tape or screw.

Quick guide:

• Make sure the WiFi network is a 802.11 b/g/n 2.4GHz band and internet is

available.

• Download the app from Apple store or Google Play;

• Register an account in the app and login with your email address;

• Setup the device WiFi connection;

• Mount the device on speciﬁed location;

• Test and check the device and app working state;

3.PRODUCT DIAGRAM

Buzzer

LED light

Mute/Test

Anti-tamper switch

Battery insulation strip

Battery slot

Bracket

4.PRODUCT SPECIFICATIONS

Power supply: 1 x CR123A DC 3V (included)

Battery life: Up to 3 years

Detection range: Up to 50 m2

Alarm level: 85dB @ 3 meters

Push notiﬁcations: Yes

Tamper notiﬁcations: Yes

Low battery notiﬁcations: Yes

History record: Yes

Self test: Yes

WiFi standard: IEEE 802.11b/g/n

Supported WiFi network: 2.4GHz

Color: White

Housing material: PC + ABS

Installation method: Screws or 3M tape

Operating temperature: -10°C - +55°C

Operating humidity: 5% - 95% RH

Product dimensions: 70 x 70 x 29mm

Product weight: 88 gr

Set up router

This device only supports 2.4GHz frequency band router, does not support

5GHz frequency band router, please set the relevant parameters of the

router before WiFi conﬁguration, WiFi passwords do not include special

characters such as ~!@#$%^&*(). When the device is conﬁgured in WiFi,

the mobile phone and device are as close as to the router, which can speed

up the conﬁguration of the device.

5. INSTALL APP AND REGISTER AN ACCOUNT

Download the Tellur Smart App for both iOS and Android OS.

Scan the QR code to download Tellur Smart App

Android

IOS Download App(IOS&android)

6. ADD AND REMOVE DEVICE IN YOUR APP ACCOUNT

6.1 Open the app and login, Click Add Devices > Security and Sensor >

Smoke Detector (Wi-Fi) to start the device adding.

6.2 Press the device button for 5 seconds to enter the Wi-Fi conﬁguration

state (fast blinking in EZ mode or slow blinking in AP mode).

6.3 Input the Wi-Fi SSID and password of the Wi-Fi network that the device

is going to work with, then waiting around 30 seconds for the Wi-Fi

conﬁguration ﬁnished until a device is successfully added;

6.4 Change the device name and share it within APP account as you want.

6.5 Click the device just added to launch the device state UI to check the

state, battery level, record history and the APP notiﬁcation setting.

Note:

*Make sure the device and APP work in same Wi-Fi conﬁguration mode, both

in EZ mode or in AP mode.

*In some case that the EZ mode is not working Wi-Fi network, AP mode is the

only option.

• EZ mode:

make sure your APP is internet available and device and APP both work in

EZ mode. Then input the Wi-Fi network password to ﬁnish the device

adding. If you want to change the Wi-Fi network, please check the “Change

network” in APP;

• AP mode:

Click AP Mode, make sure your APP is internet available and device and

APP both work in AP mode. Conﬁrm to input the SSID and Password of

Wi-Fi network, then select the Device AP name with Tellur Smart App in

Wi-Fi list then back to App to ﬁnish the device adding.

After the device is successfully added to APP account, the LED will turn

off. Using the methods mentioned in LED indicator to check the device is

successfully added or not. If not, please repeat the Device adding again.

6.6 Remove device

1) Click “Remove Device” to remove this device from your account; click

“Restore manufacturer Defaults” to remove the device from your account

and clear the history record in cloud.

2) After remove device or Restore manufacturer defaults from the APP,

repeating the Device add steps to your account;

7.PRODUCT INSTALLATION

•The product is only for indoor ceiling installation;

•It is recommended to install this product in each corridor outside the

room. If more rooms face different corridors, it is suggested to install the

product in each corridor;

•For the room or corridor that is longer than 12m, it is recommended to

install a product at each end;

•If your house has multiple ﬂoors, it is recommended to install it on every

ﬂoor, including the loft and the basement.

•Keep a distance of at least 50cm from the lamps or decorations;

Keep at least 15cm away from the corner. The installation position should

be 15~30cm from the corner as shown in ﬁgure 1;

15cm

Figure 1

center

If the ceiling is inclined, as the top is a "dead air" area, install the device on

the top of the horizontal 90cm, as shown in ﬁgure 2

Figure 2

90cm

•Do not install in the bathroom, or in places accessible to water or

water droplets.

•Do not install in an area with temperature below -100C or above 550C.

•Do not install in very ventilated areas, such as near air conditioners,

ceiling fans, or fresh air vent.

•Do not install in the place where burning particles are generated

during combustion, such as the kitchen, near the stove or the exhaust

gas from the garage.

•Screw installation is recommended. The user is responsible for any

accidents and safety incidents caused by poor installation.

7.1Installation Method I (Screw installation)

•Mark the center point of the two holes in the bracket at the selected

installation place on the ceiling or wall, drill two holes in the mark with the

drill bit and insert the tapping screw to make it ﬂush with the ceiling or wall.

(Note: keep the sensor away from dust when drilling)

•Use the two screws in the accessories kit to install the bracket in position.

Screw hole

• As shown in the ﬁgure below, align the product body with the bracket

at an angle by referring to the "Product installation alignment icon

on the bracket. Rotate the product body clockwise until the product is

securely ﬁxed into the bracket.

Product installation

alignment icon side view

Product installation

alignment icon front view

7.2Installation Method II (3M tape installation)

•As shown in the ﬁgure below, align the product body with the bracket

at an angle by referring to the "Product installation alignment icon "

on the bracket. Rotate the product body clockwise until the product is

securely ﬁxed into the bracket.

Product installation

alignment icon side view

Product installation

alignment icon back view

•Use the 3M tape from the accessories kit, stick it on the back of the

bracket and place the product in the desired position.

Alarm and self-test function

In normal working state, the LED will ﬂash RED every 1 minute. If smoke is

detected, the RED LED ﬂashes quickly and a sound prompt will be activated.

For a self-test press the Test/Mute button once. The sensor will make a

prompt sound and the LED will ﬂash RED, GREEN and YELLOW, meaning the

device is working properly. During self-test the sensor will also send a

notiﬁcation to the Tellur Smart app.

! Important notes

-The sensor will self-check for online status every 10 hours.

-The sensor will send an audible, visual and a notiﬁcation on the app when

smoke is detected.

-Do not test the sensor with open ﬂame to avoid damaging the product.

-If alarm is sent during the test, it warns you of potential danger and needs

immediate attention. Never ignore any alarm, it may lead to casualties or

property damage.

-If the sensor fails to self-test please refer to “Troubleshooting” part of the

manual. If the fault can not be ﬁxed, the product should be replaced

immediately.

Mute function

In the eventuality of a non-ﬁre alarm caused by a known factor, such as

cooking smoke, the sensor can be muted by one short pressing of the

Test/Mute button. The mute period is 90 seconds, during which proper

measures needs to be made (ventilate the area, remove the smoke).

! Important notes

-After 90 seconds of Mute function, the sensor will alarm again if the smoke

concentration is still too high.

-If you do not know the source of smoke, don’t ignore it. It can lead to

casualties or property damage.

Fault mode

In case of fault alarm (such as low battery, dismantling, sensor failure), press

the Test/Mute button for 3 seconds then release. The sensor will be muted

for 12 hours, during which you can replace the battery, re-mount the device,

self-test the sensor.

Press Test/Mute button again for 3 seconds to re-activate the sensor to

normal working state.

During mute period, if another alarm occurs, the sensor alarm will be

activated.

Replace the battery

Remove the sensor, take out the battery and press the Test/Mute for 5

seconds to release the residual energy stored in the sensor. Insert the new

battery and press Test/Mute button, this will make the device to self-test. If

the self-test is ok, the sensor will switch to normal working state.

Daily maintenance

-Test the sensor at least once a week.

-Keep the sensor clean and without dust. You can clean it with a vacuum

cleaner and a soft fabric material.

-Do not use solvents or cleaning agents to clean the smoke sensor. It can

cause damages to the sensor.

-Don’t paint the sensor, it can affect the normal working of the product.

8.TROUBLESHOOTING

-If the sensor is not reacting, check if the sensor is properly installed on the

bracket.

-Check if the battery has sufﬁcient energy and replace it whenever

necessary.

-In case of anti-dismantling alarm check if the sensor is properly installed on

the bracket.

-Re-position the sensor if there are many false alarms (non-ﬁre alarms)

-Try to clean the sensor if there are many false alarms.

9.WARNING

-Always use indicated battery type, do not replace it with other battery.

-Proper dispose of the battery, do not incinerate, burn, dismantle the

battery.

-Do not leave the product in extreme high temperature environment.

-Do not disassemble the sensor, it will cause the warranty to be lost.

-Keep out of reach of children, especially the battery.

Disposal and recycling information

The crossed-out wheeled-bin symbol on your product, battery, literature or

packaging reminds you that all electronic products and batteries must be

taken to separate waste collection points at the end of their working lives;

they must not be disposed of in the normal waste stream with household

garbage. It is the responsibility of the user to dispose of the equipment

using a designated collection point or service for separate recycling of

waste electrical and electronic equipment (WEEE) and batteries according

to local laws. Proper collection and recycling of your equipment helps

ensure EEE waste is recycled in a manner that conserves valuable

materials and protects human health and the environment, improper

handling, accidental breakage, damage, and/or improper recycling at the

end of its life may be harmful for health and environment.

For other langauges please scan th QR code

Pentru manuale in alte limbi vă rugăm să scanați codul QR

Para otros idiomas, escanee el código QR

Pour les autres langages, veuillez scanner le code QR

Für andere Sprachen scannen Sie bitte den QR-Code

Per altre lingue, eseguire la scansione del codice QR

www.tellur.com/manual-tll331281

Tellur TLL331281 Manual de utilizare

Marca: Tellur

Model: TLL331281

Categorie: Detectoare de fum

Tip: Manual de utilizare

Acest manual este potrivit și pentru

TLL331281 Wi-Fi Smoke Sensor

Descărcați PDF

raport

în alte limbi

English: Tellur TLL331281 User manual

Tellur TLL331281 Manual de utilizare

Acest manual este potrivit și pentru

Tellur TLL331281 Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente