Beko DEN 477 MWD Manual de utilizare

Categorie
Frigidere
Tip
Manual de utilizare

Acest manual este potrivit și pentru

DEN 477 WD
DEN 477 MWD
Refrigerator
Frigider
Hűtőszekrény
Please read this manual first!
Dear Customer,
We hope that your product, which has been produced in modern plants and
checked under the most meticulous quality control procedures, will provide you
an effective service.
For this, we recommend you to carefully read the entire manual of your product
before using it and keep it at hand for future references.
This manual
• Will help you use your appliance in a fast and safe way.
• Read the manual before installing and operating your product.
• Follow the instructions, especially those for safety.
• Keep the manual in an easily accessible place as you may need it later.
• Besides, read also the other documents provided with your product.
Please note that this manual may be valid for other models as well.
Symbols and their descriptions
This instruction manual contains the following symbols:
C Important information or useful usage tips.
A Warning against dangerous conditions for life and property.
B Warning against electric voltage.
This product bears the selective sorting symbol for waste electrical and
electronic equipment (WEEE).
This means that this product must be handled pursuant to European Directive
2002/96/EC in order to be recycled or dismantled to minimize its impact on
the environment. For further information, please contact your local or regional
authorities.
Electronic products not included in the selective sorting process are potentially
dangerous for the environment and human heatlh due to the presence of
hazardous substances.
Recycling
EN
2
1 Your refrigerator 3
Technical specifications of your refrigerator... 4
2 Warnings 5
General safety .............................................. 5
Starting Up ................................................... 6
If there are any children at home... ................ 6
Intended use ................................................ 6
Safety instructions ........................................ 6
Things to be done for energy saving ............. 6
3 Installation 7
Preparation ................................................... 7
Points to be considered when re-transporting
your refrigerator ............................................ 7
Before operating your refrigerator ................. 8
Electric connection ....................................... 8
Disposing of the packaging .......................... 8
Disposing of your old refrigerator .................. 9
Adjusting the legs ......................................... 9
Installing the lower ventilation cover .............. 9
Changing the illumination lamp .................... 9
4 Using your refrigerator 10
Indicator Panel ............................................ 10
Water dispenser ......................................... 12
Odour filter ................................................. 14
Snack compartments ................................. 14
Crisper humidity control sliders ................... 15
Using the rotary crisper (in some models) ... 15
Icematic and ice storage container ............. 16
5 Maintenance and cleaning 17
Protection of plastic surfaces ..................... 17
6 Recommended solutions for the
problems 18
CONTENTS
EN
3
C Figures that take place in this instruction manual are schematic and may not
correspond exactly with your product. If the subject parts are not included in the
product you have purchased, then it is valid for other models.
1 Your refrigerator
Freezer compartment shelf
1.
Icematic
2.
Ice storage container
3.
Adjustable glass shelves
4.
Wine rack
5.
Illumination lens
6.
Odour filter (in the air duct)
7.
Snack compartments
8.
Crisper humidity control sliders
9.
Crisper cover
10.
Crisper
11.
Lower ventilation cover
12.
Adjustable legs
13.
Freezer compartment door shelf
14.
Water dispenser
15.
Egg holders
16.
Fridge compartment door shelves
17.
Freezer compartment
18.
Fridge compartment
19.
5
1
2
3
4
4
4
6
4
8
10
11
12
13
7
18
19
14
17
17
17
15
14
9
17
16
EN
4
A+
355
355
90
15
6
T
40
445
189
70
68
90
160
230-50
R600a
Technical specifications of your refrigerator
* (Actual consumption varies depending on where and how the appliance is used)
** (Power failure safety; it is recommended not to consume the food in freezer
compartment after this period.)
C Technical specifications can be changed to increase the product quality without
being subject to prior notice.
C Values stated on the markings on the product or in the printed materials supplied
with the product are the values obtained in laboratory in accordance with relevant
standards. Such values may vary depending on the usage of the product and the
ambient conditions.
C The dimensions given on the table describe the minimum required space to place
the unit with doors closed.
Energy Class
Annual Energy Consumption (kWh/year)*
Fridge Compartment Volume (Net-lt)
Total Frozen Food Compartment Volume
(Net-lt)
Star Class
Temperature Increasing Time (hours)**
Freezing Capacity (kg/24 hours)
Climate Class
Noise Level (dB(A))
Total Net Volume (lt)
(H) Height (cm)
(W) Width (cm)
(D) Depth (cm)
Weight (kg)
Total Power (W)
Electric Supply (V/Hz)
Coolant Type
EN
5
2 Warnings
Please review the following
information. If these are not followed,
personal injury or material damage
may occur. Otherwise, all warranty and
reliability commitments will become
invalid.
The usage life of the unit you
purchased is 10 years. This is the
period for keeping the spare parts
required for the unit to operate as
described.
General safety
When you want to dispose/scrap
the product, we recommend you
to consult the authorized service in
order to learn the required information
and authorized bodies.
Consult your authorized service for
all your questions and problems
related to the refrigerator. Do not
intervene or let someone intervene to
the refrigerator without notifying the
authorized services.
Do not eat cone ice cream and ice
cubes immediately after you take
them out of the freezer compartment!
(This may cause frostbite in your
mouth.)
Do not put bottled and canned
liquid beverages in the freezer
compartment. Otherwise, these may
burst.
Do not touch frozen food by hand;
they may stick to your hand.
Vapor and vaporized cleaning
materials should never be used in
cleaning and defrosting processes
of your refrigerator. In such cases,
the vapor might get in contact with
the electrical parts and cause short
circuit or electric shock.
Never use the parts on your
refrigerator such as the door as a
means of support or step.
Do not use electrical devices inside
the refrigerator.
Do not damage the cooling circuit,
where the refrigerant is circulating,
with drilling or cutting tools. The
refrigerant that might blow out when
the gas channels of the evaporator,
pipe extensions or surface coatings
are punctured may cause skin
irritations and eye injuries.
Do not cover or block the ventilation
holes on your refrigerator with any
material.
Repairs of the electrical appliances
must only be made by qualified
persons. Repairs performed by
incompetent persons may create a
risk for the user.
In case of any failure or during
a maintenance or repair work,
disconnect your refrigerators mains
supply by either turning off the
relevant fuse or unplugging your
appliance.
Do not pull by the cable when pulling
off the plug.
Place the beverage with higher
proofs tightly closed and vertically.
Flammable items or products that
contain flammable gases (e.g.
spray) as well as the explosive
materials should never be kept in the
appliance.
Do not use mechanical devices
or other means to accelerate the
EN
6
defrosting process, others than those
recommended by the manufacturer.
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to
ensure that they do not play with the
appliance
Starting Up
Do not operate a damaged
refrigerator. Consult your service if
you have any doubts.
Electrical safety of your refrigerator
shall be guaranteed only if the earth
system in your house complies with
standards.
If there are any children at
home...
Do not allow children play with
your refrigerator. They might harm
themselves and the refrigerator. (E.g.
do not allow them hang from the
door.)
Intended use
This product is designed for
domestic use.
It should not be used outdoors. It
is not appropriate to use it outdoor
even if the place is covered with a
roof.
Safety instructions
Exposing the product to rain, snow,
sun and wind is dangerous with
respect to electrical safety.
Contact the authorized service when
there is a power cable damage and
etc. so that it will not create a danger
for you.
Caution: Never plug the refrigerator
into the wall outlet during installation.
Otherwise, risk of death or serious
injury may arise.
Things to be done for energy
saving
C Do not leave the doors of your
refrigerator open for a long time.
C Do not put hot food or drinks in your
refrigerator.
C Do not overload your refrigerator so
that the air circulation inside of it is
not prevented.
C Do not install your refrigerator
under direct sunlight or near heat
emitting appliances such as ovens,
dishwashers or radiators.
C Pay attention to keep your food in
closed containers.
A Your product is equipped with a
natural cooling system (R600a)
which does not contain CFC and
HFC gases. This gas is flammable.
Therefore, pay attention to not
damaging the cooling system
and piping during usage and
transportation. In the event of
damage, do not dispose the product
in fire; keep your product away from
potential fire sources that can cause
the product catch a fire and ventilate
the room in which the unit is placed.
EN
7
3 Installation
B Please remember that the
manufacturer shall not be held
liable if the information given in the
instruction manual is not observed.
Preparation
Your refrigerator should be installed
at least 30 cm away from heat
sources such as hobs, ovens, central
heater and stoves and at least 5
cm away from electrical ovens and
should not be located under direct
sunlight.
The ambient temperature of
the room where you install your
refrigerator should at least be 1C.
Operating your refrigerator under
cooler conditions than this is not
recommended with regard to its
efficiency.
Please make sure that the interior
of your refrigerator is cleaned
thoroughly.
If two refrigerators are to be installed
side by side, there should be at least
2 cm distance between them.
When you operate your refrigerator
for the first time, please observe the
following instructions during the initial
six hours.
- The door should not be opened
frequently.
- It must be operated empty without
any food in it.
- Do not unplug your refrigerator. If
a power failure occurs out of your
control, please see the warnings in
the Recommended solutions for the
problems” section.
Original packaging and foam
materials should be kept for future
transportations or moving.
Points to be considered
when re-transporting your
refrigerator
1. Your refrigerator must be
emptied and cleaned prior to any
transportation.
2. Shelves, accessories, crisper and
etc. in your refrigerator must be
fastened securely by adhesive tape
against any jolt before repackaging.
3. Packaging must be tied with thick
tapes and strong ropes and the
rules of transportation printed on the
package must be followed.
Please remember…
Every recycled material is an
indispensable source for the nature
and for our national resources.
If you wish to contribute to recycling
the packaging materials, you can
get further information from the
environmental bodies or local
authorities.
EN
8
Before operating your
refrigerator
Before starting to use your refrigerator
check the following:
1. Is the interior of the refrigerator dry
and can the air circulate freely in the
rear of it?
2. Insert the 2 plastic wedges onto
the rear ventilation as illustrated in
the following figure. Plastic wedges
will provide the required distance
between your refrigerator and the wall
in order to allow the air circulation.
3. Clean the interior of the refrigerator as
recommended in the “Maintenance
and cleaning” section.
4. Plug the refrigerator into the wall
Important:
The connection must be in
compliance with national regulations.
The power cable plug must be easily
accessible after installation.
Voltage and permitted fuse protection
are indicated in the Specifications
section.
The specified voltage must be equal
to your mains voltage.
Extension cables and multiway plugs
must not be used for connection.
A damaged power cable must be
replaced by a qualified electrician.
B Product must not be operated before
it is repaired! There is danger of
electric shock!
Disposing of the packaging
The packing materials may be
dangerous for children. Keep the
packing materials out of the reach
of children or dispose them of by
classifying them in accordance
with the waste instructions. Do not
dispose them of along with the normal
household waste.
The packing of your refrigerator is
produced from recyclable materials.
Disposing of your old
refrigerator
Dispose of your old machine without
giving any harm to the environment.
outlet. When the fridge door is open
the fridge compartment interior light
will come on.
5. You will hear a noise as the
compressor starts up. The liquid and
gases sealed within the refrigeration
system may also give rise to noise,
even if the compressor is not running
and this is quite normal.
6. Front edges of the refrigerator may
feel warm. This is normal. These
areas are designed to be warm to
avoid condensation.
Electric connection
Connect your product to a grounded
socket which is being protected by a
fuse with the appropriate capacity.
EN
9
Installing the lower
ventilation cover
You can install the lower ventilation
cover as illustrated in the figure.
Adjusting the legs
If your refrigerator is unbalanced;
You can balance your refrigerator by
turning the front legs of it as illustrated
in the figure. The corner where the
leg exists is lowered when you turn
in the direction of black arrow and
raised when you turn in the opposite
direction. Taking help from someone
to slightly lift the refrigerator will
facilitate this process.
Changing the illumination
lamp
To change the lamp used for
illumination of your refrigerator, please
call your Authorized Service.
You may consult your authorized
dealer or waste collection center of
your municipality about the disposal
of your refrigerator.
Before disposing of your refrigerator,
cut out the electric plug and, if there
are any locks on the door, make them
inoperable in order to protect children
against any danger.
EN
10
1
3
4 11 13 12 6
7
5
2 10 9 8
4 Using your refrigerator
Indicator Panel
1- Quick Freeze Function
Quick Freeze indicator will remain lit
when the Quick Freeze function is
enabled. To cancel this function press
Quick Freeze button again. Quick
Freeze indicator will turn off and return
to its normal settings. If you do not
cancel it, Quick Freeze will cancel itself
automatically after 4 hours or when the
freezer compartment reaches to the
required temperature.
If you want to freeze large amounts
of fresh food, press the Quick Freeze
button before putting the food into the
freezer compartment. Compressor
will not start running immediately if
you press the Quick Freeze button for
more then once with short intervals
since the electronic circuit protection
system will be activated.
This function is not recalled when
power restores after a power failure.
2- Quick Freeze Indicator
This icon flashes in an animated style
when the Quick Freeze function is
active.
3- Freezer Set Function
This function allows you to make the
freezer compartment temperature
setting. Press this button to set
the temperature of the freezer
compartment to -18, -20, -22, -24
respectively.
4- Freezer Compartment
Temperature Setting Indicator
Indicates the temperature set for the
Freezer Compartment.
5- Fridge Set Function
This function allows you to make
the fridge compartment temperature
setting. Press this button to set the
temperature of the fridge compartment
to 8, 6, 4, 2 respectively.
EN
11
6- Fridge Compartment
Temperature Setting Indicator
Indicates the temperature set for the
Fridge Compartment.
7- Quick Fridge Function
When you press Quick Fridge button,
the temperature of the compartment
will be colder than the adjusted values.
This function can be used for food
placed in the fridge compartment and
required to be cooled down rapidly.
If you want to cool large amounts
of fresh food, it is recommended to
active this feature before putting the
food into the fridge. Quick Fridge
indicator will remain lit when the Quick
Fridge function is enabled. To cancel
this function press Quick Fridge button
again. Quick Fridge indicator will turn
off and return to its normal settings.
If you do not cancel it, Quick Fridge
will cancel itself automatically after 2
hours or when the fridge compartment
reaches to the required temperature.
This function is not recalled when
power restores after a power failure.
8- Quick Fridge Indicator
This icon flashes in an animated style
when the Quick Fridge function is
active.
9- Lock Function
Press Freezer Set and Fridge Set
buttons simultaneously for 3 sec. to
activate the Lock function. Not other
function can be selected from the
display panel when the lock function
is active. Press Freezer Set and Fridge
Set buttons simultaneously for 3 sec.
again to deactivate the Lock function.
10- Eco-Fuzzy (Special Economic
Usage) Function
Press the Quick Freeze button for 3
seconds to activate the Eco Fuzzy
Function. If this function is activated,
refrigerator will start to operate at
the most economic mode minimum
6 hours later and economic usage
indicator will turn on. Press the Quick
Freeze button for 3 seconds again to
deactivate the Eco Fuzzy Function.
11- High Temperature/ Error
Warning Indicator
This light comes on during high
temperature failures and error
warnings.
12. Economic Usage Indicator
Economic Usage Indicator turns on
when the Freezer Compartment is set
to -18°C. Economic Usage Indicator
turns off when the Quick Fridge or
Quick Freeze function is selected.
13- Humidity Indicator
Indicator light lights up continuously.
This light indicates that the food kept
in the refrigerator is preserved for a
long time under ideal humidity.
EN
12
Water dispenser
Water dispenser is a very useful
feature to obtain chilled water without
opening the door of your fridge. Since
you do not have to open the door of
your fridge frequently, you also save
on electricitiy.
Using the water dispenser
Push in the lever of the water
dispenser with your glass. By releasing
the lever, you cut off the dispensing.
When operating the water dispenser,
maximum flow is achieved by fully
depressing the lever. Please note, how
much water flows from the dispenser
depends on how far you
depress the lever. As the level of water
in your cup / glass rises, gently reduce
the amount of pressure on the lever to
avoid overflow. If you depress the lever
a small amount, then water will trickle;
this is perfectly normal and is not a
fault.
Filling in the water tank of water
dispenser
Open the cap of the water tank as
illustrated in the figure. Fill in with pure
and clean drinking water. Close the
cap.
Caution!
Do not fill water tank with any liquid
other than drinking water; beverages
such as fruit juice, carbonated fizzy
soda drinks, alcoholic drinks are not
suitable for use with water dispenser.
If such liquids are used, the water
dispenser will malfunction and may
be damaged beyond repair. The
guarantee does not cover such uses.
Some chemical ingredients and
additives in such drinks / beverages
may also attack and damage water
tank material.
Only use clean pure drinking water.
Capacity of water dispenser tank is 2.2
litres [3.8 pints], do not overfill.
Push the water dispenser lever with a
rigid cup. If you are using a plastic
disposable cup, then push the lever
with your fingers from behind the
cup.
Cleaning the water tank
Remove the water tank, open the
latches on both sides and detach the
top cover mechanism from the water
tank. Clean the water tank with warm
clean water, reinstall the top cover
mechanism and fasten the latches.
EN
13
When installing the water tank, make
sure that hooks behind it fits securely
into the hangers on the door. Make
sure that parts removed during
cleaning (if any) are installed correctly
into their original locations. Otherwise,
water may leak.
Important:
Water tank and components of water
dispenser are not dishwasher-proof.
Water tray
Water that drips while using the water
dispenser accumulates in the drip
tray. Remove the drip tray by pulling
it towards yourself and empty it from
time to time.
Remove the plastic drainer part as
shown in the diagram by pressing
down on the edge.
Remove the water valve from the water
tank as shown in the diagram. When
re-fitting, make sure the O-shaped seal
is in place.
EN
14
Odour filter
Odour filter in the air duct of the fridge
compartment prevents the build-up of
unpleasant odours in the refrigerator.
Snack compartments
You can increase the inner volume
of your refrigerator by removing the
desired snack compartment. Pull the
compartment towards yourself until it
is stopped by the stopper. Raise the
front part for approximately 1 cm and
pull the compartment towards yourself
again to remove it completely.
You can place the food that you want
to freeze in order to prepare them for
freezing in these compartments. You
can also use these compartments
if you want to store your food at a
temperature a few degrees below the
fridge compartment.
EN
15
Using the rotary crisper (in
some models)
The crisper of your refrigerator which
opens with a rotating movement is
designed specially to provide ease of
usage and allow you to store more
vegetables and fruits (large volume)
you buy during large shopping.
When you grab and pull the handle
on the lower left hand side of the
crisper, it will rotate from left to right
and open easily. The separator in the
crisper will allow you to separate the
vegetables and fruits according to their
types and prevent them from crushing.
Crisper humidity control
sliders
Using the crisper humidity control
sliders
Crisper of your refrigerator is designed
specially to keep your vegetables
freshly without loosing their humidity.
Cold air circulates basically around
the crisper and the amount of the
cold air passing through the crisper is
controlled by the sliders on the front
side of the crisper cover.
You can adjust the humidity control
sliders to a suitable position according
to the humidity and cooling condition
of your food in the crisper.
If you want your food in the crisper
to cool more, open the holes of the
humidity control sliders and if you
want them to cool less and keep their
humidity for a longer time, close the
holes.
EN
16
Icematic and ice storage
container
Using the Icematic
* Fill the Icematic with water and place
it into its seat. Your ice will be ready
approximately in two hours. Do not
remove the Icematic from its seating to
take ice.
* Turn the knobs on it clockwise by 90
degrees.
Ice cubes in the cells will fall down into
the ice storage container below.
* You may take out the ice storage
container and serve the ice cubes.
* If you wish, you may keep the ice
cubes in the ice storage container.
Ice storage container
Ice storage container is only intended
for accumulating the ice cubes. Do not
put water in it. Otherwise, it will break.
EN
17
5 Maintenance and cleaning
A Never use gasoline, benzene or
similar substances for cleaning
purposes.
B We recommend that you unplug the
appliance before cleaning.
Never use any sharp abrasive
instrument, soap, household
cleaner, detergent and wax polish for
cleaning.
Use lukewarm water to clean the
cabinet of your refrigerator and wipe
it dry.
Use a damp cloth wrung out in
a solution of one teaspoon of
bicarbonate of soda to one pint of
water to clean the interior and wipe it
dry.
Make sure that no water enters the
lamp housing and other electrical
items.
If your refrigerator is not going to be
used for a long period of time, unplug
the power cable, remove all food,
clean it and leave the door ajar.
Check door seals regularly to ensure
they are clean and free from food
particles.
To remove door racks, remove all the
contents and then simply push the
door rack upwards from the base.
Protection of plastic
surfaces
Do not put the liquid oils or oil-
cooked meals in your refrigerator
in unsealed containers as they
damage the plastic surfaces of your
refrigerator. In case of spilling or
smearing oil on the plastic surfaces,
clean and rinse the relevant part of
the surface at once with warm water.
EN
18
6 Recommended solutions for the problems
Please review this list before calling the service. It might save you time and
money. This list includes frequent complaints that are not arising from defective
workmanship or material usage. Some of the features described here may not
exist in your product.
Complaint
Possible Reason Solution
The refrigerator does not
operate
Is the refrigerator properly plugged
in? Insert the plug to the wall socket.
Is the fuse of the socket which your
refrigerator is connected to or the
main fuse blown out?
Check the fuse.
Condensation on the
side wall of the fridge
compartment.
Very cold ambient conditions.
Frequent opening and closing of
the door. Highly humid ambient
conditions. Storage of food
containing liquid in open containers.
Leaving the door ajar.
Switching the thermostat to a colder
degree.
Decreasing the time the door left open or
using it less frequently.
Covering the food stored in open
containers with a suitable material.
Wipe the condensation using a dry cloth
and check if it persists.
Compressor is not running
Protective thermic of the compressor
will blow out during sudden power
failures or plug-out plug-ins as the
refrigerant pressure in the cooling
system of the refrigerator has not
been balanced yet.
Your refrigerator will start running
approximately after 6 minutes. Please call
the service if your refrigerator does not
startup at the end of this period.
The fridge is in defrost cycle.
This is normal for a full-automatically
defrosting refrigerator. Defrosting cycle
occurs periodically.
Your refrigerator is not plugged into
the socket.
Make sure that he plug is inserted tightly
to the wall socket.
Are the temperature adjustments
correctly made?
There is a power failure. Call your electricity supplier.
The fridge is running
frequently or for a long time.
Your new refrigerator may be wider
than the previous one.
This is quite normal. Large refrigerators
operate for a longer period of time.
The ambient room temperature may
be high.
This is quite normal.
The refrigerator might have been
plugged in recently or might have
been loaded with food.
Cooling down of the refrigerator
completely may last for a couple of hours
longer.
Large amounts of hot food might
have been put in the refrigerator
recently.
Hot food causes longer running of the
refrigerator until they reach the safe
storage temperature.
Doors might have been opened
frequently or left ajar for a long time.
The warm air that has entered into the
refrigerator causes the refrigerator to run
for longer periods. Open the doors less
frequently.
Freezer or fridge compartment door
might have been left ajar.
Check if the doors are tightly closed.
EN
19
Complaint Possible Reason Solution
The fridge is running
frequently or for a long
time.
The refrigerator is adjusted to a very
low temperature.
Adjust the refrigerator temperature to
a warmer degree and wait until the
temperature is achieved.
Door seal of the fridge or freezer may
be soiled, worn out, broken or not
properly seated.
Clean or replace the seal. Damaged/
broken seal causes the refrigerator to
run for a longer period of time in order
to maintain the current temperature.
The temperatures are too low
Freezer temperature is
very low while the fridge
temperature is sufficient.
The freezer temperature is adjusted
to a very low temperature.
Adjust the freezer temperature to a
warmer degree and check.
Fridge temperature is
very low while the freezer
temperature is sufficient.
The fridge temperature is adjusted to
a very low temperature.
Adjust the fridge temperature to a
warmer degree and check.
Food kept in the fridge
compartment drawers are
freezing.
The fridge temperature is adjusted to
a very low temperature.
Adjust the fridge temperature to a
warmer degree and check.
The temperatures are too high.
Temperature in the fridge
or freezer is very high.
The fridge temperature is adjusted to
a very high degree. Fridge adjustment
has an effect on the temperature of
the freezer.
Change the temperature of the fridge
or freezer until the fridge or freezer
temperature reaches to a sufficient level.
Doors might have been opened
frequently or left ajar for a long time.
Warm air rushes into the fridge or
freezer when the doors are opened.
Open the doors less frequently.
The door might be left ajar. Close the door completely.
Large amounts of hot food might
have been put in the refrigerator
recently.
Wait until the fridge or freezer reaches
the desired temperature.
The refrigerator might have been
plugged in recently.
Cooling down of the refrigerator
completely takes time because of the
size.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66

Beko DEN 477 MWD Manual de utilizare

Categorie
Frigidere
Tip
Manual de utilizare
Acest manual este potrivit și pentru

în alte limbi