Simplicity 2691473-01 Manual de utilizare

Original Instruction

Form No. 1761306

Revision: 1

Original Instruction

Form No. 1758032

Revision D

Not for Reproduction

8 
18 
29 
40 
51 
62
73
82
92
102
112
123
134
145
156
166
176
186
196
206
216
226
237
247
259
271
282
292
302
Not for Reproduction

English Operating Instruction – Lawnmower with IC engine

8

Contents

For your safety . . . . . . . . . . . . . . 8

Assembly . . . . . . . . . . . . . . . . . 10

Operation . . . . . . . . . . . . . . . . . 10

Tips on lawn care . . . . . . . . . . . 13

Transport . . . . . . . . . . . . . . . . . 14

Servicing/cleaning . . . . . . . . . . 14

Immobilizing . . . . . . . . . . . . . . . 15

Warranty . . . . . . . . . . . . . . . . . 15

Engine . . . . . . . . . . . . . . . . . . . 15

Identifying and eliminating

malfunct

ions . . . . . . . . . . . . . . . 15

Information on the

identification plate

These specifications are very

important for subsequent

identification when ordering spare

parts and for customer service. You

wi

ll find the identification plate in

the vicin

ity of the engine. Copy all

information stated on the

identification plate into the following

space.

You can find these and further

de

tails on the device in the

separate CE declaration of

conformity that is a constituent part

of th

is operating manual.

Illustrations

Fold out the illustrated pages at the

start of the operating manual.

Various models are described in

these op

erating instructions.

Graphical representations can vary

in detail from the appliance which

ha

s been bought.

For your safety

Use the appliance properly

This device is approved solely for

use

– in accordance with the

descrip

tions and safety

instructions specified in these

operating instructions

– to mow the lawns of domestic

and

leisure gardens.

Any other use is not an intended

use. Improper use is not covered

by the warranty and the

manufacturer will reject any liability.

The user is then liable for all

injuries to third parties and damage

to their property.

Unauthorised changes to the

de

vice shall exclude all liability of

the manufacturer for any resulting

damage and/or injury.

Only for appliances with electric

starter:

When the appliance is fitted with an

el

ectric starter, the provided

charger is intended exclusively to

charge the accumulator fitted in the

appliance The accumulator must

be charged from this charger only.

Observe the safety and

operating information

Before operating the appliance for

the first time, please read these

operating instructions carefully and

act accordingly. Comply with the

operating manual and keep it for

subsequent use. Never allow

children or other people unfamiliar

with this operating manual to use

the unit.

All persons involved in bringing into

service

, operation or maintenance

of the mower must be appropriately

qualified.

If the mower changes ownership,

ha

nd over the operating manual.

General notes on safety

In this section you will find general

information about safety. Warnings

that apply specifically to individual

parts of the mower, functions or

activities are shown at the

corresponding point in this user's

guide.

Before working with the mower

Persons who use the mower must

not be under the influence of

intoxicants, e.g. alcohol, drugs or

med

ication.

Do not permit children under the

ag

e of 16 to handle this power tool

(e.g. local regulations may specify

the minimum age of the user).

Do not use the mower if you have

no

t received appropriate training or

are tired or ill.

This appliance is not intended for

use

by persons (including children)

with reduced physical, sensory or

mental capabilities, or lack of

experience and knowledge, unless

they have been given supervision

or instruction concerning use of the

appliance by a person responsible

for their safety.

Children should be supervised to

en

sure that they do not play with

the device.

Before starting work,

familiarise

yourself with all the equipment and

controls as well as their functions.

Store fuel in permi

tted containers

only and never near heat

sources (e.g. cooker or hot water

tank). R

efuel the mower outdoors

only.

Never refuel the mower while the

en

gine is running or hot.

Replace the exhaust, tank or fuel

cap

if they become damaged.

Before using the appliance,

– whether the grass catcher works

and the deflector closes

correctly. Replace damaged,

worn out or missing parts

immediately.

– check for any wearing or damage

to

the cutters, fastening pins, and

the whole cutter unit. Have worn

or damaged parts replaced by a

specialist company and only in

sets to exclude imbalances.

Spare parts and accessories must

satisfy the requirements specified

by the manufacturer.

Therefore only use original spare

pa

rts and original accessories or

spare parts and accessories that

have been authorised by the

manufacturer.

Not for Reproduction

Operating Instruction – Lawnmower with IC engine English

9

The use of spare parts or

accessories that have not been

approved by the manufacturer can

represent a significant safety risk.

Have repairs performed

exclu

sively by a qualified

technician or specialist workshop.

Ensure that maintenance work is

al

ways performed to schedule so

that the mower remains in a safe

condition.

When working with the mower

When working with or on the

appliance you must wear protective

clothing. This includes:

– Safety shoes,

– trousers,

– close-fitting garments,

– hearing protection,

– protective goggles.

Wearing personal protective

equipment reduces the risk of

injuries. Avoid the wearing of loose

clothing or clothing with hanging

cords or belts. Working without ear

protection may result in loss of

hearing. Even when wearing ear

protection, include regular work

breaks to give your ears a rest.

All safety devices must be installed

on

the appliance, and they must be

complete and in a fully functional

condition.

Do not make any changes to the

safety

devices.

Operate the mower onl

y in the

technical condition stipulated and

delivered by the manufacturer.

Never change the preset factory

en

gine settings.

Prevent naked flames a

nd spark

formation, and do not smoke.

Notes on vibrations:

The impact of vibrations can cause

damage to nerves and disrupt

blood circulation in the hands and

arms.

– When working in cold

envi

ronments, wear warm

clothing and keep your hands

warm and dry.

– Take breaks.

– If you notice that the skin on your

finge

rs or hands is becoming

numb, tingling, painful or going

white in colour, cease working

with the machine and, if

necessary, seek medical

attention.

Before carrying out any work on

this mower

To prevent injury, before

performing any work on the

appliance (e.g. maintenance and

ad

justments) and before

transporting it (e.g. lifting or

carrying):

– switch off the engine,

– remove the ignition key (if used),

– wait until all moving pa

rts have

come to a complete stop and

the engine has cooled down,

– remove the spark plug connector

on the en

gine to prevent the

engine from being accidentally

started,

– which takes into account

additional safety information in

the engine manual.

After working with the device

Never leave the appliance without

switching off the engine and – if

used – without removing the

ignition key.

Safety devices

Fig. 1

Danger

Never use an appliance if it has

da

maged safety devices or if there

are no safety devices fitted.

Safety lever (1)

The safety lever stops the motor

and cutting blades in an

emergency.

There must be no atte

mpt to

circumvent this function, which is

crucial for your personal safety.

Ejection flap (2) or impact

protection (3)

The ejection flap/impact protection

protects you from being injured by

the blade or by ejected solid

objects. The appliance must

always be operated with the

ejection flap or impact protection.

Symbols on the unit

On the device you will find various

symbols on adhesive labels. They

have the following meanings:

Caution! Before

switching on, read the

op

erating

instructions!

Keep third parties out

of the danger area!

Switch off the engine

and remove the

ign

ition key before

carrying out any work

on the appliance and

before leaving the

appliance.

Please follow

ad

ditional information

in the section entitled

”For your safety”.

Always remove the

spark plug connector

before working on the

cutters!

Keep fingers and feet

away from the

cutt

ers! Always

switch off the mower

and

remove the spark

plug connector before

adjusting, cleaning or

checking it.

Risk of injury – only work with

impact

protection mounted.

!

Not for Reproduction

English Operating Instruction – Lawnmower with IC engine

10

Risk of injury – only work with tail

clamp mounted.

Risk of injury – only work with

deflector mounted.

Ensure these symbols mounted on

the un

it remain legible.

Replace any damaged or illegible

symbols

.

Symbols in the operating

manual

Symbols are employed in the

operating manual to indicate

hazards or draw attention to

important information. Here is an

explanation of the symbols:

Danger

Draws your attention to sources of

po

tential danger associated with

the task you are undertaking at the

time which constitute a danger to

persons.

Caution

Draws your attention to potential

hazards associated with the task

you are undertaking at the time

which could result in damage to

the mower.

Note

This indicates important

information and application tips.

Assembling the appliance

Assembly of the appliance is

illustrated on a separate

supplementary sheet.

Disposal instructions

Dispose of packaging remnants,

old mowers, etc. in accordance

with local regulations.

Operation

Also follow the instructions in the

engine handbook.

Danger

Accident

– No person, especially children,

and

/or animals should be

allowed to stand close to the

appliance while it is in use. Risk

of injury due to ejected stones or

other objects.

Falling over

– Only push the machine along at

wal

king pace.

– Be particularly careful when

mowin

g in reverse and pulling

the appliance towards you.

– When mowing on steep slopes,

there is a risk

of the mower

tipping over and you could be

injured as a result. Mow

crossways to the slope, never

upwards and down-wards. Do

not mow on slopes with an incline

greater than 20%.

– Be particularly careful when

chan

ging the direction and

always pay attention to a good

position.

– Mowing along perimeters

involves a r

isk of injury. Mowing

near edges, hedges or steep

inclines is dangerous. Keep a

safe distance from perimeters

when mowing.

– If the ground is w

et the mower

could slip due to reduced traction

and overturn. Only cut the grass

when the ground is dry.

– Work only by daylight or in good

artificial

lighting.

Injury

– Always observe the safety

distance to the rotating tool

specified by the steering handle.

– The working area of the operator

is behind the steering handle

during operation.

– Never place your hands or feet

on or under rotating parts.

– Do not use the device in adverse

w

eather conditions, e. g. if there

is a risk

of rain or a storm.

– Turn off the engine and wait until

the bla

de has stopped:

– before tilting the ap

pliance,

– for transporting over surfaces

othe

r than grass,

– Switch off the engine to prevent

the engine from being started

unintentionally: Remove ignition

key (if used), leave the engine to

cool down and remove the spark-

plug terminal,

– before you clear the ejector of

bl

ockages and other

hindrances,

– before you check, clean, or

config

ure the appliance or

perform any work on it,

– immediately after a foreign

ob

ject. Check the appliance for

damage, and have any

damage repaired at a

specialised garage,

– immediately after the appliance

st

arts to vibrate. With unusual

violence and before you check

the appliance.

– Never lift or carry the appliance

whe

n the engine is running.

– Inspect the ground on which the

mower is goi

ng to be used and

remove any loose objects that

could be picked up and thrown

out again by the mower.

– If the cutter strikes a foreign

o

bject (e.g. stone) or if the mower

starts vibrating unusually:

Immediately switch off the

engine.

Before continuing to use the unit,

have

it checked for damage by a

specialist workshop.

– When rotary mowing, never

sta

nd in front of the grass

discharge openings.

!

Not for Reproduction

Operating Instruction – Lawnmower with IC engine English

11

Appliances with grass catchers:

– If you remove the grass catcher,

you or other person

s might get

injured due to ejected, mowed

materials or foreign bodies.

Never empty the grass sack

while the engine is running.

Switch off the appliance.

Danger of asphyxiation due to

ca

rbon monoxide poisoning

Run the internal combustion engine

ou

tdoors only.

Danger of explosion and fire

– Petrol vapours are explosive and

petrol is hig

hly flammable.

– Fill with fuel before

starting the

engine. Keep the tank closed

while the engine is running or still

hot.

– Before refuelling, switch off the

eng

ine and wait until it has

cooled down. Prevent naked

flames and spark formation, and

do not smoke. Refuel the mower

outdoors only.

– If fuel has overflowed, do not

sta

rt the engine. Remove unit

from the fuel-contaminated area

and wait until the fuel vapours

have evaporated.

– To avoid fire hazard, please keep

th

e following parts free of grass

and escaping oil:

– Engine

– Exhaust

– Batteries / accumulators

– Petrol tank.

Danger of stumbling

– Operate the mower at wa

lking

speed only.

Caution

Damage to the lawn mower

– Stones, branches or similar

obj

ects lying about may damage

the unit and its mode of

operation. Remove all objects

from the appliance’s path before

every use.

– Do not operate the mower if it is

not in perfect w

orking order.

Before operating the unit, always

carry out a visual inspection.

Check in particular the safety

equipment, controls and

threaded connections for

damage and secure attachment.

Replace damaged pa

rts before

operating.

Operating times

Comply with the national/municipal

reg

ulations concerning the times

when the machine may be used

(if required, contact your local

au

thority).

Location details

Specified positions on the

ap

pliance (e.g. on the left, on the

right) are always seen from the

steering handle in the working

direction of the appliance.

Before starting up the

appliance for the first time

Filling the engine with oil

Caution

For reasons of transportation the unit

is delivered without engine oil.

 Therefore, you must fill the

engine with oil before putting into

operation for the first time.

Charging the accumulator

(appliances with electric starter)

Risk of chemical burns/

poisoning

In extreme cases be alert to the

esca

pe of liquids or gases.

Depending on the model, the

accu

mulator is located in the

dashboard, on the upper handle

(Fig. 2a) or on the mower deck

(Fig. 2b/c).

Risk of electric shock

Before using the charger, always

che

ck for external damage. Never

use a damaged charger.

Caution

– Ensure that the power supply

operates at 220–230 V and

50 Hz according to the

specifica

tions on the rating plate

of the charger.

– Protect the charger from

humi

dity, rain, snow and frost.

– Charge accumulator in well

ventil

ated and dry rooms only.

Do not exceed the maximum

charging time of 12 hours.

– Before switching on, disconnect

the charge

r from the power

supply and appliance.

Fig. 2



Before using the unit for the first

time, charge the accumulator for

at least 10 hours. Only use the

battery charger incl

uded in the

delivery.

Note

Disconnect the battery charger in

re

verse order.

Disposal information for the

charger

The charger is subject to the

disposal regulations for electrical

appliances. Observe the local

regulations.

Always adjust machine

before using

Risk of injury

Before carrying ou

t any work on

this mower

– Switch off the engine

– Remove the ignition key (if used),

– Wait until all moving parts have

come to

a standstill; the engine

must have cooled down,

– Remove the spark plug

conn

ector on the engine in order

to prevent the engine from

accidentally being started.

Hang the grass catcher

(only in the case of appliances with

grass catchers)

Fig. 11

 Lift up the deflector flap and hook

the grass sack onto the lawn

scarifier.

Set the cutting height

Caution

Select cutting height for uneven

terrain to prevent the cutter from

ever coming into contact with the

ground.

!

Not for Reproduction

English Operating Instruction – Lawnmower with IC engine

12

Fig. 3

Set the cutting height

of the grass

as required.

Setting option (depending on

mode

l) from approx. 3

cm to

maximum 9

cm.

Note

If appliances have individual wheel

ad

justment, set all wheels to the

same height.

Model A

 Attach the wheels in the position

required.

Model B

 Pull the flap and snap into place

in the position required.

Model C



Advance or push back the lever of

the central vertical adjustment and

snap into place in the position

required.

Locking front wheels

(only appliances with lockable front

wheels)

Fig. 4

Lock wheels to drive straight ahead

–

set the wheels in forward position

and put hoop into large hole.

Wheels are freely movable – put

cla

mp into large hole.

Fill up with fuel and check the

oil level

 Fill up with lead-free petrol (see

engine manual).

 Fill fuel tank up to max. 2 cm

below the lower edge of the inlet

nozzle.

 Close fuel tank tightly.

 Check oil level and, if required,

top up (see Engine manual).

Starting the engine

Fig. 5

Danger

To prevent injury:

– Do not start the engine when you

are standing in front of the

ejector;

– Keep hands and feet well away

fro

m the cutting blade;

– never place your hands, feet, or

other parts of the bo

dy near

rotating parts; Always keep away

from the ejector.

Before starting the engine,

di

sengage the clutches for all

cutters and drives.

Do not tip the appliance when

starti

ng. Keep the appliance on an

even surface with little or the

shortest possible grass.

Information about the engine

Observe the information in the

en

gine manual.

– Some models have no throttle

and

the speed is adjusted

automatically. The engine

always runs at optimum speed.

– Even if the engine is warm, it may

be necessary to actuate the

choke or the primer.

– Some models have no choke and

no pri

mer. The engine is

automatically set to the particular

starting process.

If the engine

is cold:

 Open the fuel tap (if fitted).

Units with choke :

 Set the choke lever to , or pull

out the choke and set the

accelerator lever (if

fitted) to

/max. (Fig. 5A)

or

 Set the accelerator lever to -

fig. 5A.

Appliances with primer:

 Press primer forcefully 1–5x and

move throttle (if fitted) to

/max. – fig. 5B.

If the engine

is warm:

 Open the fuel tap (if fitted).

 Set throttle (if available) to

/max. – Fig. 5B

Appliances without electric starter:

Fig. 5C

 Stand behind appliance – Press

and hold safety lever.

 Slowly pull the starter cable grip

until you feel resistance, and

then pull quickly and strongly. Do

not let the pull-starter handle

spring back, but slowly guide it

back.

For appliances with electric starter:

Fig. 5D

 Disconnect charger from power

supply and unit.

 Stand behind appliance – Press

and hold safety lever.

 Turn ignition key on the steering

handle until the engine starts

(start attempt max. 5 seconds,

wait 60 seconds before the next

attempt).

Note:

If appliances feature electric

starter, the eng

ine (depending on

model) can also be started

manually with the pull-starter

handle.

When the engine is running:

 After starting the engine

(depending on the model):

– return the choke (if fitted),

– move the accelerator lever (if

fi

tted) between /max and

/min so that the engine can

warm up briefly.

 Set the throttle to full throttle (if

available).

Note

If you need more information about

op

erating the engine, please refer

to the engine manual.

Stopping the engine

Fig. 7

 Bring throttle (if available) into

position /min.

 Release the safety hoop. The

engine and the cutting tool stop

after a short time.

Working with the snow-

clearing machine

Engaging/disengaging gear

drive

(only in the case of appliances with

gear drives)

Fig. 6A, B, C

Wheel drive activation

/ :

 Pull and hold the lever/hoop.

Wheel drive deactivation

/ :

 Release lever/hoop.

!

Not for Reproduction

Operating Instruction – Lawnmower with IC engine English

13

Information for units

corresponding with Fig. 6C

The unit can be switched on/off

with the left or the right lever or

even with both levers together.

Note

When the unit is pulled back, there

may

be increased resistance on the

back wheels on account of the

design. This is not a fault with the

appliance but occurs for technical

reasons.

Remedy (depending on model):

W

ithout pulling the drive handle,

push appliance forwards a little,

then backwards.

Changing drive speed of the

wheel drive

(depending on model)

Caution

Damage to the la

wn mower

Make adjustments when the engine

is running only.

Model 6D, E

 Select from the different speeds

using the small lever (1/min./

and 4/max./ ).

Fig. 6F, G

 Select from the different speeds

using the lever (1/min./ and

4/max./ ).

Note

For technical reasons the speed

may

be difficult to change when the

appliance is at a standstill.

Remedy: Pull drive bar and select

spe

ed setting.

Detaching and emptying the

grass sack

(for appliances with grass catchers)

Fig. 11

If cut grass is left lying on the

gro

und or if the level indicator

(optional, Fig. 12) indicates that the

basket is full:

 Release safety hoop and wait

until the engine stops.

 Lift the deflector flap and unhook

the grass sack.

 Empty out the contents.

Working without the grass sack

Whenever you detach the grass

sack, the deflector flap drops down.

When working without a grass

catcher, the mowed grass is

ejected directly downwards.

Retrofitting for mulching

(for appliances with optional

mulcher)

Appliances with rear discharge:

Fig. 8A

 Lift the ejection flap.

 Remove the grass catcher.

 Insert mulch key

(depending on model).

 Lower the ejection flap.

Note

Models with integrated

mulching

function do not require a separate

mulch key – a specially shaped rear

flap assumes this function (fig. 8B).

Appliances with side discharge:

Fig. 9

 Attach impact protection/mulch

lock instead of the side discharge

(Fig. 9A)

or

 Remove side discharge – impact

protection/mulch lock closes

automatically (Fig. 9B).

Changing appliances over to

side discharge

(depending on model)

 If fitted:

Remove grass catcher and lower

the rear discha

rge flap.

 Lift impact protection/mulch lock

and attach side discharge

(Fig.

9C).

After finishing work

 Remove the ignition key (if used).

 Wait until all moving parts have

come to a complete stop and

the engine has cooled down.

 Turn off the fuel tap (if fitted – see

engine manual).

 Disconnect the spark plug

terminal on the engine.

 Empty grass catcher.

For appliances with electric starter:

 Recharge accumulator for

10 hours.

Note

Leave engine to cool down before

pl

acing the mower in an enclosed

space.

Tips on lawn care

Here are some tips to help you

keep your lawn looking healthy and

ensure uniform growth.

Mowing

A lawn is made up of various

different types of grass. If you mow

your lawn frequently, those types of

grass which form strong roots and

a firm turf surface will grow better.

If you only rarely cut the grass, you

wi

ll encourage the development of

high-growing types of grass and

other weeds, such as clover and

da

isies.

The normal height of a lawn

is

approx. 4–5 cm. Only 1/3 of the

total he

ight should be mown;

therefore cut 7–8 cm long grass to

no

rmal height.

Preferably do not cut the lawn

sho

rter than 4 cm, otherwise the

turf

will be damaged in a dry period.

If the grass has grown particularly

hi

gh (e.g. during a holiday period),

cut it

back to its normal height in

stages.

When mowing, always overlap the

mown

swaths slightly.

Mulching (using the

accessories)

During mowing the grass is cut into

small pieces (approx. 1 cm) and is

le

ft on the ground. A lot of the

nutrients in the cut grass are

retained for the benefit of the lawn.

For the best possible result the

gra

ss must always be kept short,

see also section ”Mowing”.

Observe the following mulching

instructions:

– Do not mow wet grass.

– Never mow more than 2 cm.

– Drive slowly.

– Use the maximum engine speed.

– Regularly clean the cutter deck.

Not for Reproduction

English Operating Instruction – Lawnmower with IC engine

14

Transporting

Short distances by hand

Danger

Solid objects may be hit/propelled

by th

e rotating cutter deck causing

damage.

First stop the engine before moving

it over surfa

ces other than grass.

When using a vehicle

Danger

Before transportation, always stop

the

engine and leave to cool down.

Remove spark-plug terminal.

The mower must not be tilted when

it is tran

sported.

When transporting the scarifier in

or

on a vehicle, ensure that it does

not move around unintentionally.

Empty the fuel tank before

transpo

rting the device. The filler

cap must be closed tightly.

Appliances with collapsible bars:

Fig. 10

 The steering handle can be

folded down to facilitate storage.

Servicing/cleaning

Danger

To protect against injury

before all

work on the device

– switch off the engine,

– Remove the ignition key (if used),

– wait until all moving parts have

co

me to a complete stop and

the engine has cooled down,

– remove the spark plug connector

on the eng

ine to prevent the

engine from being accidentally

started,

– which takes into account

add

itional safety information in

the engine manual.

Danger

To protect against injury from the

cutters, have

a specialist garage

perform all work such as replacing

or regrinding the cutters (special

tools required).

Caution

When tilting the unit, always ensure

that t

he spark plug is face up to

prevent fuel or oil damaging the

engine.

Note

Regular care ensures a long

service

life and fault-free operation.

Inadequate maintenance of your

appliance may lead to safety-

related defects.

Maintenance

Caution

Observe the servicing

instructions

in the engine manual. At the end of

the season, have the mower

inspected and serviced by a

specialist workshop.

Any repairs as well as the

re

placement of defective

accumulators or defective fuses

may be carried out by a specialist

workshop only.

Caution

Environmental hazard caused by

e

ngine oil.

After changing the oil, take the

wa

ste oil to a waste oil collecting

point or to a waste disposal

company.

Batteries / accumulators

pollute the environment.

Used accumulators do no

t belong

in domestic waste. Give used

accumulators to your dealer or

other disposal company. Remove

batteries / accumulators before

appliances are scrapped.

Note

Observe the inspection and

ma

intenance intervals in the engine

manual.

Depending on the model, your

ap

pliance features an electronic

maintenance indicator (fig. 13).

Observe the appropriate

maintenance indicators in addition

to the written maintenance

instructions. Operation as well as

further information can be found in

the separate operating instructions

which are enclosed with the

maintenance indicator.

Before each operation

 Check the oil level and top up as

necessary.

 Check all screw fittings for firm

seating, tighten them if

necessary.

 Check the safety features.

Check the point of contact of the

clutch:

(only in the case of appliances with

ge

ar drives)

– The appliance should not drive

forwards whe

n the engine is

running and when the gear drive

is not engaged.

– The appliance should drive

forwards when the engine is

running and the gear drive is

engaged.

Fig. 15

 If required, set contact point using

thumb wheel/adjusting nut on the

wheel drive lever (depending on

design on the underside of the

control panel) or Bowden cable.

Note

Adjustments are not possible on

some mode

ls.

After the first 2–5 operating

hours

 Change oil (please see engine

manual enclosed).

Each time after mowing or

every 8 weeks

(only appliance with electric starter)

 Recharge accumulator for

10 hours.

Once a season

 Change oil (please see engine

manual enclosed).

 Lubricate the pivot points and

torsion spring on the ejector

cover.

 At the end of the season the unit

must be checked and serviced by

a specialist workshop.

Cleaning

Caution

Clean the device after every use.

A device which is not cleaned will

result in damaged materials and

impaired function.

Do not clean the unit with a high

-

pressure cleaner.

!

Not for Reproduction

Operating Instruction – Lawnmower with IC engine English

15

Cleaning the grass sack

(only in the case of appliances with

grass catchers)

The easiest time to clean the grass

catcher is immedia

tely after

mowing.

 Detach and empty the grass

sack.

 The grass catcher may be

cleaned with a powerful jet of

water (garden hose).

 Allow the grass sack to dry out

thoroughly before using it again.

Cleaning lawn mower

Danger

Work on the cutters

can cause

injury. Wear safety gloves for your

protection.

Caution

When tilting the unit, always ensure

that t

he spark plug is face up to

prevent fuel or oil damaging the

engine.

Do not spray the device with water,

oth

erwise electric components may

be damaged.

Whenever possible, always clean

the appliance directly after mowing.

Units without deck washing

system:

 Clean the cutter chamber and the

ejector cover with brush, hand

broom, or cloth,

 Set the appliance down on its

wheels, and remove all visible

grass residue and other soiling.

Units with deck washing system:

Fig. 14

Lawnmowers with a de

ck washing

system feature a water connection.

Grass clippings can then be rinsed

off the underside of the mower

deck and deposits of corrosive

chemicals prevented.

After mowing, proceed as follows:

 Place appliance on level ground,

free of debris, stones, etc.

Note

Discharge chute must n

ot be

directed at houses, garages, etc.

 Attach a commercially available

hose adapter (optionally included

in the product package) to a

water hose and connect to the

water connection on the mower

deck.

 Turn on water.

 Start engine and leave running

for several minutes.

 Stop engine and remove water

hose from the appliance.

At the end of the cleaning process:

 Start engine and leave running

for several minutes to dry the

underside of the mower deck.

 Stop the engine.

Immobilizing

Danger

Risk of explosion and fire.

When there is fuel (petrol) in the

tank, never keep

the appliance in

rooms where fuel vapours can

come into contact with naked

flames or sparking.

Caution

Damage to mower materials.

Only store the unit (with the engine

cooled down) in a clean and dry

room. Protect the appliance when

storing it for longer periods of time

e.g. against rust in winter.

At the end of the season or if the

unit will not be used for longer than

a month:

 Drain off the fuel into a suitable

receptacle, and immobilise the

engine as described in the

engine manual.

Caution

Drain fuel outdoors only.

 Clean the appliance and the

grass sack.

 To protect metal parts from rust,

wipe them all down with an oiled

cloth (resin-free oil) or apply an

oil spray.

 Charge the accumulator

(if fitted).

Warranty

The warranty rules issued by our

company or the importer apply to

every country. Faults will be

repaired free of charge within the

framework of the guarantee,

provided that they have been

caused by a material defect or

manufacturing error. Should you

need to call upon the warranty,

please apply to the vendor of your

machine or to the nearest agency.

Engine

The manufacturer of the engine is

liable for all engine-related

problems with respect to output

power, power measurement,

specifications, warranties, and

service. More detailed information

ca

n be found in the owner/operator

ha

ndbook provided separately

by the engine manufacturer.

Identifying and eliminating

malfunctions

Malfunctions that occur during the

operation of your lawnmower often

have simple causes that you

should know and be able to repair

on your own. In cases of doubt your

specialised dealer will be pleased

to assist you further.

!

Not for Reproduction

English Operating Instruction – Lawnmower with IC engine

16

.

Problem Possible cause(s) Remedy

Starter cable resists pulling. Safety lever has not been

pr

essed.

Press safety loop against the upper

bar.

Blade is blocked. Remove spark plug connector and

get rid of

the blockage.

Engine defective. Contact a specialist garage

Engine does no

t start. Throttle is not in the right

position.

Set throttle to position or CHOKE

(if the engine is cold).

Set throttle to /max position or

START (if the engine is warm).

Lawnmower is standing in long

gr

ass.

Place the lawnmower onto a surface

with shorter grass.

No fuel in the tank. Fill tank with clean

, fresh fuel

Spark-plug lead not connected. Connect spark-plug terminal.

Fuel old or dirty. Replace with new fuel.

Air filter clogged. Clean air filter.

Choke not actuated. Pull out choke.

Primer not actuated for cold

start.

Actuate primer.

– For appliances with electric starting

devices:

Accumulator discharged. Charge accumulator with the

charge

r provided.

Lead damaged. Check whether electric lead OK.

Fuse defective. Have defective fuse replaced by a

specia

list workshop.

Unusual noises (rattling, clanging,

knocking).

Bolts, nuts or other mounting

parts slack.

Tighten parts. If the

noises persist:

Contact a specialist garage

Shaking, vibrations. Cutter(s) loose. Cutter fastening screw must be

tighten

ed at specialist garage.

Cutter(s) damaged. Cutters must be replaced at

specia

list garage.

Cutters not balanced correctly. Cutters must be replaced or

bal

anced at specialist garage.

Engine not secure. Engine must be secured at

specia

list garage.

Unclean cut or speed is decreasing. Grass too high. Set larger cutting height, if

nece

ssary mow twice.

Grass is not being picked up or grass

catch

er is not filling.

Grass too damp. Let the lawn dry.

Ejector clogged. Switch OFF engine, remove

hin

drance.

Blades blunt. Cutters must be replaced or

regrou

nd at a specialist garage.

Insufficient power from motor. Mow more often. Select

a greater

cutting height.

Grass sack full. Switch off engine. Unload grass

catcher.

Dirty grass sack. Switch off engine. Clean air ducts in

the grass catch

er.

Not for Reproduction

Operating Instruction – Lawnmower with IC engine English

17

Wheel drive does not work. V belt torn or gears defect. Damaged parts must be replaced at

a specialist garage.

Cable pull/Bowden cable torn. Damaged parts must be replaced at

a specia

list garage.

Problem Possible cause(s) Remedy

Not for Reproduction

Français Notice d’instructions – Tondeuse à gazon avec moteur thermique

18

Sommaire

Pour votre sécurité . . . . . . . . . . .18

Montage . . . . . . . . . . . . . . . . . . .20

Utilisation . . . . . . . . . . . . . . . . . . .20

Conseils pour entretenir le

gazon . . . . . . . . . . . . . . . . . . . . . .24

Transport . . . . . . . . . . . . . . . . . . .24

Maintenance / Nettoyage . . . . . .25

Remisage . . . . . . . . . . . . . . . . . .26

Garantie . . . . . . . . . . . . . . . . . . . .26

Information sur le moteur . . . . . .26

Dérangements et remèdes . . . . .26

Indications sur la plaque

signalétique

Ces indications sont très

importantes car elles permettront

ultérieurement d'identifier l'appareil

et de commander les pièces de

rechange. Elles sont également

utiles au service après-vente. Vous

trouverez la plaque signalétique à

proxi

mité du moteur. Veuillez

reporter dans le champ ci-dessous

toutes les indications figurant sur la

plaque signalétique de votre

appareil.

Ces indications ainsi que d’autres,

relatives à l’

appareil, figurent sur la

déclaration de conformité CE

séparée, qui fait partie intégrante du

présent mode d’

emploi.

Illustrations

Dépliez les volets illustrés situés en

début de notice.

La présente notice d’instructions

décri

t différents modèles d’appareil.

Dans le détail, les illustrations

graphiques peuvent différer de

l

’appareil acheté.

Pour votre sécurité

Utilisation correcte de

l’appareil

Cet appareil est exclusivement

destiné à servir

– conformément aux descriptions et

co

nsignes de sécurité énoncées

dans la présente notice ;

– à tondre les surfaces gazonnées

de l

a maison ou d’un jardin

d’agrément.

Toute autre utilisation est non

conforme. Toute utilisation non

conforme à l’usage prévu e

ntraîne

une perte de la garantie, et le

fabricant décline pour sa part toute

responsabilité. L’utilisateur répond

de tous les dommages occasionnés

aux tiers et à leurs biens.

Les modifications apportées

arbitrairement à la machine

dégagent l

e fabricant de toute

responsabilité à l'égard des

dommages en résultant.

Appareils à démarreur électrique

uniquement :

Le chargeur compris dans les

fournitures est exclusivement

destiné à recharger l’accu présent

sur l’appareil. Cet accu ne pourra

être rechargé que par ce chargeur.

Respecter les consignes de

sécurité et les instructions de

commande

Avant d'utiliser l’appareil pour la

première fois, veuillez, en tant

qu’utilisateur, lire attentivement la

présente notice. Respectez les

consignes figurant dans la notice et

rangez cette dernière en vue d’une

utilisation future. Ne permettez

jamais aux enfants, ou aux

personnes qui ne connaissent pas le

contenu de la notice d’instructions,

d’utiliser l’appareil.

Toutes les personnes chargées de

l

a mise en service, de l’emploi et de

la maintenance de la tondeuse

doivent disposer des qualifications

adéquates.

En cas de changement de

propriétaire,

remettez-lui également

le mode d’emploi avec l’appareil.

Consignes de sécurité

générales

Dans cette section, vous trouverez

des consignes de sécurité

générales. Les mises en garde se

référant à des pièces précises de

l’appareil, à des fonctions ou

activités spécifiques, se trouvent à

l’endroit correspondant dans la

présente notice.

Après les travaux avec l’appareil

L’utilisation de cet appareil est

interdite aux personnes sous

l’emprise de l’alcool, de drogues

psychotropes ou sous l

’effet de

médicaments.

Il est interdit aux personnes de

moi

ns de 16 ans d’utiliser cet

appareil

ou d’effectuer tous travaux

dessus, dont par exemple de

maintenance, nettoyage, réglage.

Des dispositions en vigueur

localement peuvent fixer un âge

minimum différent.

N'utilisez pas l'appareil sans

formati

on adéquate ou si vous êtes

fatigué ou malade.

Cet appareil n’est pas destiné à être

util

isé par des personnes

(y compris les enfants) présentant

des capaci

tés physiques,

sensorielles ou mentales

restreintes, ou en l’absence de

l’expérience et/ou des

connaissances requises, sauf si

elles sont surveillées par une

personne responsable de leur

sécurité, ou si elles ont reçu de sa

part des instructions sur la façon

d’utiliser l’appareil.

Il faut surveiller les enfants pour être

sûr qu’

ils ne jouent pas avec

l’appareil.

Avant de commencer le tr

avail,

familiarisez-vous avec tous les

organes de l’appareil et leurs

fonctions.

Ne stockez le carburant que dans

des récipi

ents homologués à cet

effet et jamais à proximité de

sources de chaleur (par ex. fours

ou chauffe-eau accumul

ateurs). Ne

faites le plein de l’appareil qu’en

plein air.

Not for Reproduction

Notice d’instructions – Tondeuse à gazon avec moteur thermique Français

19

Ne faites jamais le plein moteur en

train de tourner ou encore très

chaud.

Remplacez le pot d’échappement, le

rése

rvoir ou le bouchon du réservoir

s’ils sont abîmés.

Avant chaque utilisation, vérifiez

– si le dispositif de ramassage

d’herbe foncti

onne et le clapet

d’éjection se ferme correctement.

Remplacez immédiatement les

pièces endommagées, usées ou

manquantes.

– si les outils de coupe, boulons de

fixati

on et l’ensemble de l’unité de

coupe sont usés ou

endommagés. Pour exclure toute

apparition d’un balourd, faites

remplacer les pièces usées ou

endommagées par jeu entier, par

un atelier spécialisé.

Les pièces de rechange et les

accessoires doivent satisfaire aux

exigences définies par le fabricant.

Pour ces raisons, n’util

isez que des

pièces de rechange d’origine ou des

pièces de rechange et accessoires

homologués par le fabricant.

L’utilisation de pièces de rechange

ou d'accessoires non agréés par l

e

fabricant, peut constituer un risque

considérable pour la sécurité.

Confier les réparations

excl

usivement à un spécialiste

qualifié ou un atelier spécialisé.

Réalisez toujours les travaux de

maintenance

aux intervalles prévus

afin de maintenir l’appareil dans un

état de fonctionnement sûr.

Pendant les travaux avec

l’appareil

Pendant les travaux avec ou sur

l’appareil, portez une tenue de

travail appropriée telle que par

exemple :

– des chaussures de sécurité,

– des vêtements moulants,

– vêtements moulants,

– protection auditive,

– une paire de lunettes de

protection.

Le port de l’équipement de

protection indi

viduelle réduit le

risque de blessures. Évitez de porter

des vêtements amples ou

présentant des cordons ou des

ceintures pendants. Le travail sans

protection auditive peut entraîner

une perte auditive. Le port d'une

protection auditive ne dispense pas

de faire des pauses afin de ménager

l'ouïe.

Tous les dispositifs de protection

doivent toujours ê

tre fixés contre

l’appareil et se trouver dans un état

impeccable.

N’apportez aucune modification aux

équipements de sécurité.

N’utilisez l’appareil que dans l’état

techni

que prescrit et livré par le

fabricant.

Ne modifiez jamais les préréglages

du moteur effectu

és en usine.

Évitez toute flamme nue ainsi que la

producti

on d’étincelles et ne fumez

pas.

Remarques relatives aux

vibrations :

Une exposition aux vibrations peut

entraîner des lésions nerveuses et

causer des défauts de circulation

sanguine au niveau des mains et

des bras.

– Lors de travaux effectués dans le

froi

d, portez des vêtements

chauds et maintenez vos mains

au chaud et au sec.

– Faites des pauses.

– Si vous constatez que la peau de

vo

s doigts ou de vos mains

s'engourdit, picote, fait mal ou

blanchit, stoppez les travaux et

consultez éventuellement un

médecin.

Avant d'effectuer des travaux sur

cet appareil

Pour vous prémunir du risque de

blessure avant de procéder à des

travaux sur cet appareil (p. ex.

travaux de

maintenance et de

réglage) et de le transporter

(p. ex. soulever ou porter)

– arrêter le moteur,

– retirez la clé de contact (si

présente),

– attendez que toutes les pièces

mobil

es se soient entièrement

immobilisées et que le moteur ait

refroidi.

– détachez la cosse de la bougie sur

le moteur pour e

mpêcher un

démarrage intempestif du moteur

de ce dernier,

– lire les consignes de sécurité

su

pplémentaires figurant dans le

manuel du moteur.

Après les travaux avec l’appareil

Ne descendez jamais de l’appareil

sans éteindre le moteur et retirez la

clé de contact si présente.

Dispositifs de sécurité

Fig. 1

Danger

N’utilisez jamais un appareil dont les

équipements de sécurité sont

endommagés ou s’ils n’ont pas été

montés.

Etrier de sécurité (1)

L’étrier de sécurité a été conçu pour

votre sécurité et pour, en cas

d’urgence, arrêter le moteur et le

mécanisme de coupe.

Ne tentez pas de contourner une

foncti

on.

Clapet d’éjection (2) ou

chicane

(3)

Le clapet d’éjection / la chicane vous

protège des blessures que

pourraient occasionner le

mécanisme de coupe ou des corps

solides catapultés. Faites

impérativement marcher l’appareil

avec le clapet d’éjection ou la

chicane.

!

Not for Reproduction

Français Notice d’instructions – Tondeuse à gazon avec moteur thermique

20

Symboles figurant sur

l'appareil

Vous trouverez différents symboles

sur l’appareil, sous forme

d’autocollants. Voici l’explication de

ces symboles :

Attention ! Avant la

mise en service, lire la

notice

d’instructions !

Éloignez les tiers de la

zone dangereuse !

Éteignez le moteur et

retirez la clé de

contact avant

d’effectuer tous

travaux sur l

’appareil

et avant de quitter

l’appareil.

Tenez compte des

consignes

suppl

émentaires

figurant à la section

« Pour votre

séc

urité ».

Avant d’effectuer des

travaux sur les outils

de coupe, débranchez

la cosse de la bougie !

Éloignez les mains et

les

pieds des outils de

coupe ! Avant de

régler ou de nettoyer

l’

appareil ou avant de

le vérifier, éteignez-le

puis débranchez la

cosse de la bougie.

Risque de blessures – Ne travaillez

qu’avec l

a chicane en place.

Risque de blessures – Ne travaillez

avec qu’avec l

’étrier arrière monté.

Risque de blessures – Ne travaillez

qu’avec l’orifice d’éjection en place.

Maintenez toujours ces symboles

sur l

’appareil en parfait état de

lisibilité.

Remplacez les pictogrammes

détériorés ou devenus i

llisibles.

Symboles utilisés dans

la notice

Cette notice fait appel à divers

symboles pour signaler des risques

particuliers ou des consignes

importantes. Voici l’explication de

ces symboles :

Danger

Ce symbole désigne des risques liés

aux activités décrites et qui posent

une menace pour les personnes.

Attention

Ce symbole désigne des risques liés

aux activités décrites et qui peuvent

entraîner un endommagement de

l’appareil.

Remarque

Caractérise les informations et

conseils d'utilisation importants.

Montage

Le montage de l’appareil est illustré

par des figures sur feuille à part.

Consigne pour la mise au rebut

Éliminez les restes d’emballage, les

appareils usagés, etc.

conformément aux prescriptions

locales.

Utilisation

Respectez également les

consig nes figurant dans le manuel

du

moteur.

Danger

Accident

– Lors de la tonte, veillez à ce que

les personnes (les enfants en

particulier) et les animaux soient

éloignés de l'appareil. Risque de

blessures par des pierres ou

autres objets catapultés.

Chute

– Ne déplacez l’appareil qu’au pas.

– Soyez particulièrement prudent

lorsque vous tondez en marche

arrière et que vous ti

rez l’appareil

à vous.

– Lors de la tonte sur des surfaces

en pente, l’appareil risque de se

renverser et de vous blesser.

Tondez transversalement à la

pente, jamais en montée ou en

descente. Ne tondez pas sur des

pentes ayant une déclivité

supérieure à 20 %.

– Soyez particulièrement prudent

lorsque vous changez de sens et

ve

illez à toujours bien vous tenir

en équilibre.

– Risque de blessures également

dans les zones limi

tes. Tondre à

proximité de bordures, de haies

ou de pentes abruptes est une

opération dangereuse. Pendant la

tonte, maintenez une distance de

sécurité.

– Lorsque vous tondez de l’herbe

humide, l’appareil

peut déraper

par suite d’une baisse

d’adhérence et vous risquez de

chuter. Ne tondez que lorsque

l’herbe est sèche.

– Ne travaillez que de jour ou avec

un b

on éclairage artificiel.

!

Not for Reproduction

Pagina se încarcă ...

Simplicity 2691473-01 Manual de utilizare

Acest manual este potrivit și pentru

Simplicity 2691473-01 Manual de utilizare

în alte limbi

Alte documente