Heinner HWM-TL8013IVC++ Manualul proprietarului

Categorie
Mașini de spălat
Tip
Manualul proprietarului
l:
HCNF-V291F+/HCNF-V
1SF+/
HCNF-V291BKF+
Automatic washing machine
Loading capacity: 8 kg
Energy class: C
AUTOMATIC WASHING MACHINE
Model:
HWM-TL8013IVC++
www.heinner.com
1
1. INTRODUCTION
Please read the instructions carefully and keep the manual for future information.
This manual is designed to give all necessary instructions concerning installation, use and maintenance of the
unit. In order to operate the unit correctly and safely, please read this instruction manual carefully before
installation and use.
2. CONTENT OF YOUR PACKAGE
Automatic washing machine
User manual
Warranty card PACHET
ULUI DUMNEAVOAST
3. CONTENT OF YOUR PACKAGE
II. MASURI DE SIGURANTA
GENERAL
Please read the following safety information thoroughly and follow it strictly to minimize the risk of fire or
explosion, electric shock and to prevent property damage, personal injury or loss of life. Failing to follow
these instructions shall void any warranty.
•The appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user maintenance shall not be done by children without
supervision.
•Children should be supervised so that they do not play with the appliance.
•Children 3 years and under shall be kept away from the appliance or continuously supervised.
•Animals and children may climb into the machine. Check the machine before every operation.
•Do not climb or sit on the appliance
•All washing and additional substances are to be kept in a safe place out of the reach of children.
•Do not install the machine on a carpet floor. The obstruction of the openings by a carpet can damage the
machine.
•Keep the appliance clear from heating sources and direct sunlight to avoid plastic and rubber parts
corroding.
•Do not use the appliance in humid environments or rooms containing explosive or caustic gas. In case of
water leakage or water splashes let the appliance dry in the open air.
•The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the
opposite side to that of the washing machine.
www.heinner.com
2
•Do not operate the machine in rooms with a temperature of below 5°C. This can cause damage to parts of
it. If it is unavoidable, make sure to drain the water completely from the appliance after every use to avoid
damages caused by frost.
•Never use flammable sprays or substances in the immediate proximity of the appliance.
•If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
•If the machine is damaged, it must not be operated unless repaired by the manufacturer, its service agent
or similarly qualified persons. Risk of electric shock!
INSTALATION
•Remove all packaging material and transport bolts before using the appliance. Otherwise, serious damage
may result.
•This appliance is equipped with a single inlet valve and can be connected to the cold-water supply only.
•Mains plug must be accessible after installation.
•Before washing clothes for the first time, the product shall be operated once throughout all the
procedures without any clothes inside.
•Before using the washing machine, the product shall be calibrated.
•Do not put any excessively heavy objects on the appliance, like water containers or heating devices.
•The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be
reused.
•Max. Inlet water pressure 1 MPa. Min. inlet water pressure 0.1MPa.
ELECTRICAL CONNECTION
•Make sure the supply cable is not trapped by the machine, it can get damaged.
•Connect the product to a grounded outlet protected by a fuse complying with the values in the “Technical
specifications“table. The grounding installation has to be done by a qualified electrician. Ensure that the
machine is installed in accordance with the local regulations.
WARNING!
•Don´t use multiple plugs or extension cords.
•The appliance must not have an external switching device such as a timer or connected to a circuit that is
regularly switched on and off.
•Do not pull the plug out of the mains outlet if there is flammable gas around.
•Never pull out the power plug with wet hands.
•Always pull at the plug, not at the cable.
•Always unplug the appliance if it is not being used.
WATER CONNECTIONS
•Check the connections of the water inlet tubes, the water taps and the outlet hose for possible problems
due to changes of water pressure. If the connections loosen or leak close the water tap and get it repaired.
Do not use the appliance before the pipes and hoses are installed properly by qualified people.
•Glass door may become very hot during the operation. Keep children and pets far away from the machine
while it is operating.
www.heinner.com
3
•The water inlet and outlet hoses have to be safely installed and remain undamaged. Otherwise, water
leakage can occur.
•Do not remove the drain pump filter while there is still water in the appliance. Big quantities of water can
leak out, and there is a risk of scalding due to hot water.
OPERATION AND MAINTENANCE
•Never use any flammable, explosive or toxic solvents. Do not use gasoline and alcohol etc. as detergents.
Only select detergents that are suitable for machine washing.
•Make sure that all pockets are emptied. Sharp and rigid items such as coins, brooches, nails, screws,
stones etc. may cause serious damage to this machine.
•Remove all objects from pockets such as lighters and matches before using the appliance.
•Thoroughly rinse items that have been washed by hand.
•Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot
removers, turpentine, wax and wax removers should be washed in heat with an extra amount of detergent
before being dried in the appliance.
•Items containing foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles and
clothes or pillows fitted with foam rubber pads should not be dried in the machine
•Fabric softeners or similar products should be used as recommended in their instructions.
•Never try to open the door forcefully. The door will unlock shortly after the end of a cycle.
•Please do not close the door with excessive force. If it is found difficult to close the door, please check if
the clothes are properly inserted and distributed.
•Always unplug the appliance and close the water tap before cleaning and maintenance and after each use.
•Never pour water over the appliance for cleaning purposes. Risk of electric shock!
•Repairs shall only be carried out by the manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard. The producer will not be responsible for damage caused by the intervention of
non-authorized persons.
TRANSPORT
•Before Transport:
-Bolts shall be reinstalled to the machine by a specialized person
Accumulated water shall be drained out of the machine.
•This appliance is heavy.
Transport with care.
Never hold any protruding part of the machine when lifting.
The machine door cannot be used as a handle.
www.heinner.com
4
INTENDED USE
The product is intended only for home use and for textiles in household amounts suitable for machine
washing and drying. This appliance is for indoor use only and not intended for built in use. Only use
according to these instructions. The appliance is not intended for commercial use. Any other use is
considered improper use. The producer is not responsible for any damage or injuries that may result of it.
•This appliance is intended to be used in household and similar applications such as:
-Staff kitchen areas in shops, offices and other working environments.
-Farm houses.
-By clients in hotels, motels and other residential type environments.
-Bed and breakfast type environments.
-Areas for communal use in blocks of flats or in launderettes.
4. PRODUCT DESCRIPTION
Accessories
www.heinner.com
5
5. CONTROL PANEL
1. Power
Product is on/off.
2. Start/Pause
Press the button to start or pause the washing cycle.
3. Option
This allows you to select an additional function and will light when selected.
4. Programs
Available according to the laundry type.
5. Display
The display shows the settings, estimated time remaining, options, and status messages for your
washer. The display will remain on through the cycle.
www.heinner.com
6
6. INSTALLATION
Installation area
• Stability is important to prevent the product from wandering!
Make sure that the product should not stand on the power cord.
Before installing the machine, the location characterized as follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Room temperature is above 0
5.Keep far away from the heat resources such as coal or gas.
Unpacking the washing machine
• Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
There is a risk of suffocation!
Keep all packaging well away from children.
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing. Make sure the small triangle foam is removed
with the bottom one together. If not, lay the unit down with side surface, then remove the small foam from
the unit bottom manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum. Make sure the small triangle.
www.heinner.com
7
Remove transport bolts.
• You must remove the transport bolts from the backside before using the product.
You’ll need the transport belts again if you move the, so make sure keep them in a safe place.
Please take the following steps to remove the bolts:
1.Loosen 4 bolts with spanner and then remove them.
2.Stop the holes with transport hole plugs.
3.Keep the transport bolts properly for future use.
Levelling the washing machine
• The lock nuts on all four feet must be screwed tightly against the housing
1. Loosen the lock nut.
2. Turn your foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a spanner. Make sure the machine is level and steady.
Connect the water supply hose!
To prevent leakage or water damage, follow the instructions.
• Do not kink, crush or modify water inlet hose.
• Connect manually, do not use tools. Check if the connections are tight.
www.heinner.com
8
Drain Hose
• Position drain hose properly, otherwise damage might result of water leakage.
•Do not kink or protract the drain hose
There are two ways to place the end of drain hose:
• If the machine has drain hose support, please install it like the following.
•When installing drain hose, fix it properly with a rope
• If the drain hose is too long, do not force it into washing machine as it will cause abnormal noises.
7. OPERATION
• Before washing, please make sure the washing machine is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove any residual water and to
neutralize potential odors, it’s recommended to clean your appliance before first use. For this reason, start
the Cotton program at 60°C without laundry and detergent.
Before washing.
• Detergent needs to be added in "case I “after selecting pre-washing for machines with this function.
• Make sure that the drum flaps are properly locked.
www.heinner.com
9
•All metal hooks must be properly hooked inside the rear door flap.
•Check the roller before each laundry, it must roll smoothly.
Washing and after washing
“End” on display.
Before Each Washing
• The ambient temperature of the washing machine should be 5-40°C. If used under 0°C, the inlet valve and
draining system may be damaged. If the machine is installed under freezing conditions, it should be
transferred to normal ambient temperature to ensure the water supply hose and drain hose can unfreeze
before use.
• Please check your laundry care labels and the detergent use instructions before washing. Use non-
foaming or less-foaming detergent suitable for machine washing properly.
www.heinner.com
10
• Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible
or explosive substances like wax, oil, paint, gasoline, alcohol, kerosene, and other flammable materials.
• Washing single clothes items may easily create big eccentricity and cause alarm due to unbalance.
Therefore, it is suggested to add one or two more laundry items to the wash so that spin can be done
smoothly.
Detergent Dispenser
• Detergent only needs to be added in "case I “after selecting pre-washing for machines with this function.
• Do not exceed the “MAX” level mark when filling in detergent, additives or softener.
www.heinner.com
11
Detergent Recommendation
Recommended washing detergent
Wash cycles
Washing temp
Type of laundry and
textile
Heavy-duty detergent with bleaching
agents and optical brighteners
Cotton, ECO 40-
60, Mix
20/30/40/60
White laundry made
from boil-proof cotton
or linen
Color detergent without bleaching
agent and optical brighteners
Cotton, ECO 40-
60, Mix
Cold/20/30/40
Colored laundry made
from cotton or linen
Color or mild detergent without optical
brighteners
Synthetics
Cold/20/30/40
Colored laundry made
from easy care fibres or
synthetic materials
Mild washing detergent
Synthetics
20/30
Delicate textiles, silk,
viscose
Special wool detergent
Wool
20/30
Wool
•Agglomerating or ropy detergent or additive can be diluted in some water before pouring it into the
detergent dispenser, to avoid its inlet getting blocked and thus cause a water overflow.
• Please choose the suitable type of detergent to get a maximum of washing performance and a minimum
of water and energy consumption
• To achieve the best cleaning result a proper detergent dosing is important.
• Use a reduced detergent amount if the drum is not filled completely.
• Always adjust the amount of detergent to the water hardness, if your tap water is soft, use less
detergent.
• Dose according to how dirty your laundry is, less dirty clothes require less detergent.
• Highly concentrated (compact detergent) requires particularly accurate dosing.
Following symptoms are a sign of detergent overdosing:
- heavy foam formation
- poor washing and rinsing result
Following symptoms are a sign of detergent underdosing:
- laundry turns grey
- built-up of limescale deposits on the drum, the heating element and/or the laundry
www.heinner.com
12
Washing temperature
40°C
Maximum wash laundry amount
8kg
Spin speed selection(rpm)
1000
Additional functions
Default program duration (Min)
03:39
Laundry type / descriptions
Hard-wearing textiles, heat-resistant textiles made of
cotton or linen.
Washing temperature
40°C
Maximum wash laundry amount
4 kg
Spin speed selection(rpm)
1000
Additional functions
Default program duration (Min)
03:18
Laundry type / descriptions
Wash synthetic articles, for example: shirts, coats,
blending. While washing the knitting textiles, detergent
quantity shall be reduced due to its loose string
construction and easily forming bubbles
Washing temperature
60°C
Maximum wash laundry amount
4 kg
Spin speed selection(rpm)
1000
Additional functions
Default program duration (Min)
01:42
Laundry type / descriptions
Washing the baby’s clothes, it can make the baby's wear
cleaner. and make the rinse performance better to
protect the baby skin.
Washing temperature
40°C
Maximum wash laundry amount
2 kg
Spin speed selection(rpm)
1000
Additional functions
Default program duration (Min)
00:45
Laundry type / descriptions
Washing few and not very dirty clothes quickly.
Washing temperature
40°C
Maximum wash laundry amount
4 kg
Spin speed selection(rpm)
1000
Additional functions
Default program duration (Min)
01:20
Laundry type / descriptions
Mixed load consisting of textiles made of cotton and
synthetics.
www.heinner.com
13
Washing temperature
20°C
Maximum wash laundry amount
4 kg
Spin speed selection(rpm)
1000
Additional functions
Default program duration (Min)
01:01
Laundry type / descriptions
20 defaults, can choose cold water
Washing temperature
70°C
Maximum wash laundry amount
4 kg
Spin speed selection(rpm)
1000
Additional functions
Default program duration (Min)
02:27
Laundry type / descriptions
Consistent 70 washing ensures sterilization effects.
Loading weight lower than 5kg is suggested.
Washing temperature
Cold
Maximum wash laundry amount
2 kg
Spin speed selection(rpm)
800
Additional functions
Default program duration (Min)
00:15
Laundry type / descriptions
Extra short programme approx., suitable for lightly
soiled washing as a small amount of laundry
Washing temperature
40°C
Maximum wash laundry amount
2 kg
Spin speed selection(rpm)
800
Additional functions
Default program duration (Min)
01:07
Laundry type / descriptions
Hand or machine-washable wool or rich wool textiles.
Especially gentle wash programme to prevent shrinkage,
longer programme pauses (textiles rest in wash liquor)
Washing temperature
--
Maximum wash laundry amount
8 kg
Spin speed selection(rpm)
1000
Additional functions
Default program duration (Min)
00:12
Laundry type / descriptions
Extra spin with selectable spin speed.
www.heinner.com
14
Rinse & Spin
Washing temperature
--
Maximum wash laundry amount
8 kg
Spin speed selection(rpm)
1000
Additional functions
Default program duration (Min)
00:20
Laundry type / descriptions
Extra rinse with spin.
ECO 40-60
Washing temperature
--
Maximum wash laundry amount
8 kg
Spin speed selection(rpm)
1300
Additional functions
Default program duration (Min)
03:59
Laundry type / descriptions
Washing brightly coloured clothes, it can protect the colours better.
Default 40, not selectable, suitable for laundry washing at about
40-60
Drum Clean
Washing temperature
90°C
Maximum wash laundry amount
-
Spin speed selection(rpm)
1000
Additional functions
Default program duration (Min)
01:18
Laundry type / descriptions
Specially set in this machine to clean the drum and tube. It applies
90 °C high temperature sterilization to make the clothes washing
greener. When this programme is performed, the clothes or other
washing cannot be added. When proper amount of chlorine
bleaching agent is put in, the barrel cleaning effect will be better.
The customer can use this programme regularly according to the
need.
Duvet
Washing temperature
40°C
Maximum wash laundry amount
2.5 kg
Spin speed selection(rpm)
800
Additional functions
Default program duration (Min)
01:27
Laundry type / descriptions
This program is specially designed for washing duvet coats.
Sports
Washing temperature
20°C
Maximum wash laundry amount
4 kg
Spin speed selection(rpm)
1000
Additional functions
Default program duration (Min)
00:45
Laundry type / descriptions
Washing the activewear
www.heinner.com
15
Spin Speed
When needed, the spinning speed can be adjusted pressing the Speed button in the following steps: 1300:
0-400-600-800-1000-1200-1300
Delay
Set the Delay function:
1. Select a program.
2.Press the Delay button to choose the time (the delay time is 0-24h).
3.Press [Start/Pause] to commence the delay operation
Cancel the Delay function: Press the [Delay] button until the display light is off.
It should be pressed before starting the program.
If the program already started, should switch off the program to reset it to a new one.
Pre-Wash
Extra washing function before the main washing cycle starts to increase the washing performance. Note:
Detergent needs to be added to compartment I.
Extra Rinse
The laundry will undergo an extra rinse after selecting this function.
Temp.
When needed, the washing temperature can be adjusted by pressing the temperature button in the
following steps: Cold - 20°C - 40°C - 60°C - 90°C.
Child Lock
This function is meant to keep children from misusing the controls.
When the Child Lock is activated, the display will alternately show “CL” and the remaining time.
Pressing any other button will cause the Child Lock indicator to flash.
When the program ends, “CL” and “END” will alternate on the display.
The Child Lock deactivates the function of all buttons except the On/Off button and the Child lock button!
Only the simultaneous pressing of the two buttons [Temp.] and [Function] can deactivate the Child Lock!
Please deactivate the Child Lock before selecting a new program!
www.heinner.com
16
Mute the buzzer
CAUTION
• After Muting the buzzer function, the sounds will not be activated any more
8. MAINTENANCE
Cleaning and Care
• Before your maintenance starts, please unplug the machine and close the tap.
Cleaning The Cabinet
•Proper maintenance on the washing machine can extend its working life.
•The surface can be cleaned with diluted non-abrasive neutral detergents when necessary.
•If there is any water overflow, use the wet cloth to wipe it off immediately.
•No sharp items are allowed.
•Formic acid and its diluted solvents or equivalent are forbidden, such as solvents or chemical products,
etc.
Cleaning the drum
•The rusts left inside the drum by the metal articles shall be removed immediately with chlorine-free
detergents.
•Never use steel wool.
• Don’t put laundry in the washing machine during the drum cleaning.
Cleaning the Inlet Filter
• Diminishing water flow is a sign that the filter needs to be cleaned.
1. Close the tap and remove the water supply hose from it.
2. Clean the filter with a brush.
3. Unscrew the water supply hose from the backside of the machine. Pull out the filter with long nose
pliers.
4. Use a brush to clean the filter.
5. Reinstall the filter to the water inlet and reconnect the water supply hose.
6. Clean the Inlet filter every 3 months to ensure the normal operation of the appliance.
www.heinner.com
17
Clean The Detergent Dispenser
1.Press down the arrow location on softener cover inside the dispenser drawer.
2.Lift the clip up and take out softener cover and wash all grooves with water.
3.Restore the softener cover and push the drawer into position.
• Do not use abrasive or caustic agents to clean plastic parts.
• Clean the detergent dispenser every 3 months to ensure the normal operation of the appliance.
Cleaning the Drain Pump Filter
• Make sure that the machine has finished the washing cycle and is empty. Switch it off and unplug it
before cleaning the drain pump filter.
• Be careful of hot water. Allow the water to cool down. Risk of scalding!
• Clean the filter periodically every 3 months to ensure the normal operation of the appliance.
www.heinner.com
18
9. TROUBLESHOOTING
The start of the appliance does not work, or it stops during operation. First try to find a solution to the
problem, If not, contact the service center.
Description
Reason
Solution
Washing machine
cannot start up
Door is not closed properly
Restart after the door is closed
Check if the clothes is stuck
Door can’t be opened
Washer's safety protection design is
working
Disconnect the power, restart
the product
Water leakage
The connection between inlet pipe or
outlet hose is not tight
Check and fasten water pipes
Clean up outlet hose
Detergent residues in
the box
Detergent is dampened or agglomerated
Clean and wipe the detergent
box
Indicator or display
does not light
Disconnect the power PC board or harness
has connection problem
Check if the power is shut down
and the power plug is connected
correctly
Abnormal noise
Check if the fixing (bolts) has
been removed.
Check it’s installed on a solid and
level floor
Description
Possible Cause
Solution
E30
Door is not closed properly.
Close the door properly and restart
E10
Water injecting problem
during wash cycle.
Check if the water pressure is high enough. Straighten
the water pipe. Clean the inlet valve filter.
E21
Overtime water draining
Check the drain hose for blockage.
E12
Water overflow
Restart the appliance
EXX
Others
Restart the appliance. If problem persists, please
contact the customer service.
IMPORTANT STEPS WHEN MOVING THE APPLIANCE
• Check if the door and the detergent dispenser are closed properly.
• Remove the water inlet pipe and the outlet hose from the house installations.
• Let the water drain completely from the appliance
• Important: Re-install the 4 transport bolts in the back of the appliance.
• This appliance is heavy.
Transport with care.
Never hold any protruding part of the machine when lifting.
The machine door cannot be used as a handle.
www.heinner.com
19
TECHNICAL DATA
The technical information is situated in the rating plate on the internal side of the appliance and on the
energy label.
The QR code on the energy label supplied with the appliance provides a web link to the information related
to the performance of the appliance in the EU EPREL database.
Keep the energy label for reference together with the user manual and all other documents provided with
this appliance.
It is also possible to find the same information in EPREL using the link https:// eprel.ec.europa.eu and the
model name and product number that you find on the rating plate of the appliance.
To access information about your product in the EPREL portal, you can scan the codes below:
Thank you for purchasing this product. If you need support with your product, visit our website using the
links below.
Get User manuals: https://www.heinner.ro
Get Service information: https://www.heinner.ro
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77

Heinner HWM-TL8013IVC++ Manualul proprietarului

Categorie
Mașini de spălat
Tip
Manualul proprietarului