GP-103IT/GP-102IT
Quick Installation Guide
03-2022 / V1.0
Contents
I. Product Information ................................................ 1
I-1. Package Contents ................................................................ 1
I-2. Hardware Overview ............................................................. 1
I-3. LED Status ........................................................................... 1
II. Hardware Installation ............................................. 2
II-1. Mounting ......................................................................... 2
II-2. Connection ....................................................................... 2
III. More Information .................................................... 3
IV. Safety Instructions ................................................... 3
1
I. Product Information
GP-103IT: IEEE 802.3bt Gigabit 90W PoE++ Injector
GP-102IT: IEEE 802.3bt Gigabit 60W PoE++ Injector
I-1. Package Contents
I-2. Hardware Overview
I-3. LED Status
Function
Color
Status
Description
PWR
Green
On
Power on
Off
Power off or fail
PoE
Green
On
Powered Device (PD)connected
Off
No Powered Device (PD)Connected
Gigabit
Data Input
Gigabit Data & PoE Power Output
(GP-103IT: 90W, GP-102IT 60W)
PoE++ Injector
GP-103IT or GP-102IT
Power Cord
PoE++ Injector
GP-103IT gP-102IT
Screws
Power Socket, AC Power Input
100~240V
Power, PoE
LED Indicator
Quick Installation
Guide
Screws
2
II. Hardware Installation
To connect a PoE Injector, please follow the steps below,
II-1. Mounting
The product is designed with wall-mounted holes. You can either wall-mount
the PoE injector or place the PoE injector on a flat surface.
II-2. Connection
1. Plug injector power cord into a wall outlet.
2. Plug an Ethernet cable from the DATA Input port to the router or switch.
3. Plug an Ethernet cable from the PoE/DATA Output port to the device or
any devices that base unit Ethernet port.
PoE Devices:
1. Power on
2. Data Input
3. PoE/Data
Output
PoE Device
Switch or Router
PE+
802.3at
Up to 30W
PE++
802.3bt
Up to 90W
802.11n High
Power AP
Alarm
System
PTZ/Speed Dome
IP Camera
Video IP
Phone
RFID
Reader
802.11ac/ax
Access Point
Digital
Signage
Information
Kiosk
POS
System
PTZ/Speed
Dome IP Camera
3
III. More Information
You can find more product information or supporting documents from the link
below or via the QR code:
https://www.edimax.com/download/
Please search the model name “GP-103IT” or “GP-102IT” to enter the referred
page.
IV. Safety Instructions
The following general safety guidelines are provided to help ensure your own
personal safety and protect your product from potential damage. Remember
to consult the product user instructions for more details.
˙ This product is designed for indoor use only.
˙ Static electricity can be harmful to electronic components. Discharge static
electricity from your body (i.e. touching grounded bare metal) before
touching the product.
˙ The device contains no user serviceable parts. Do not attempt to service
the product and never disassemble the product.
˙ Do not spill food or liquid on your product and never push any objects into
the openings of your product.
˙ Do not use this product near water, areas with high humidity, or
condensation.
˙ Keep the product away from radiators and other heat sources.
˙ This device is not designed to be operated by children.
˙ Always unplug the product from mains power before cleaning and use a
dry lint free cloth only.
4
COPYRIGHT
Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication
may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language or computer language, in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written
permission from Edimax Technology Co., Ltd.
Edimax Technology Co., Ltd. makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any warranties,
merchantability, or fitness for any particular purpose. Any software described in this
manual is sold or licensed as is. Should the programs prove defective following their
purchase, the buyer (and not this company, its distributor, or its dealer) assumes the
entire cost of all necessary servicing, repair, and any incidental or consequential damages
resulting from any defect in the software. Edimax Technology Co., Ltd. reserves the right
to revise this publication and to make changes from time to time in the contents hereof
without the obligation to notify any person of such revision or changes.
The product you have purchased and the setup screen may appear slightly different from
those shown in this QIG. The software and specifications are subject to change without
notice. Please visit our website www.edimax.com for updates. All brand and product
names mentioned in this manual are trademarks and/or registered trademarks of their
respective holders.
5
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also
complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other
antenna or transmitter. End-users and installers must be provided with antenna installation instructions and
consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
R&TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT
AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal equipment and the
mutual recognition of their conformity (R&TTE). The R&TTE Directive repeals and replaces in the directive
98/13/EEC (Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000.
Warning: Operation of this equipment in a residential environment could cause radio interference.
Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However, special
attention must be paid to the dangers of electric shock and static electricity when working with electrical
equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to
ensure the safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI
version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and
Switzerland.
EU Countries Not Intended for Use
None
6
EU Declaration of Conformity
English: This equipment is in compliance with the essential requirements and other relevant
provisions of Directive 2014/30/EU.
Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la
directive 2014/30/EU.
Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními
směrnic 2014/30/EU.
Polski: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami
określonymi Dyrektywą UE 2014/30/EU.
Română: Acest echipament este în conformitate cu cerinţele esenţiale şi alte prevederi relevante ale
Directivei 2014/30/EU.
Русский: Это оборудование соответствует основным требованиям и положениям Директивы
2014/30/EU.
Magyar: Ez a berendezés megfelel az alapvető követelményeknek és más vonatkozó irányelveknek
(2014/30/EU).
Türkçe: Bu cihaz 2014/30/EU. direktifleri zorunlu istekler ve diğer hükümlerle ile uyumludur.
Українська: Обладнання відповідає вимогам і умовам директиви 2014/30/EU.
Slovenčina: Toto zariadenie spĺňa základné požiadavky a ďalšie príslušné ustanovenia smerníc
2014/30/EU.
Deutsch: Dieses Gerät erfüllt die Voraussetzungen gemäß den Richtlinien 2014/30/EU.
Español: El presente equipo cumple los requisitos esenciales de la Directiva 2014/30/EU.
Italiano: Questo apparecchio è conforme ai requisiti essenziali e alle altre disposizioni applicabili
della Direttiva 2014/30/EU.
Nederlands: Dit apparaat voldoet aan de essentiële eisen en andere van toepassing zijnde bepalingen
van richtlijn 2014/30/EU.
Português: Este equipamento cumpre os requesitos essênciais da Directiva 2014/30/EU.
Norsk: Dette utstyret er i samsvar med de viktigste kravene og andre relevante regler i Direktiv
2014/30/EU.
Svenska: Denna utrustning är i överensstämmelse med de väsentliga kraven och övriga relevanta
bestämmelser i direktiv 2014/30/EU.
Dansk: Dette udstyr er i overensstemmelse med de væ sentligste krav og andre relevante
forordninger i direktiv 2014/30/EU.
suomen kieli: Tämä laite täyttää direktiivien 2014/30/EU. oleelliset vaatimukset ja muut asiaankuuluvat
määräykset.
-----------------------------------------------------------------------------------------------------------------------
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as household or general waste. It
should be handed over to the applicable collection point for the recycling of electrical and electronic
equipment, or returned to the supplier for disposal.
7
Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the
equipment described below complies with the requirements of the European R&TTE
directives.
Equipment:
IEEE 802.3bt Gigabit 90W PoE+Injector
1-port Giga Ethernet 60W PoE Injector
Model No.:
GP-103IT
GP-102IT
The following European standards for essential requirements have been followed:
Directives 2014/30/EU
EMC
:
EN 55032:2015+A11:2020
EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1:2019
EN 55035:2017+A11:2020
Safety (LVD)
:
EN 62368-1:2014+A11:2017
Date & Place of Issue: 30/March/2022, Taipei
Signature:
Printed Name:
Hunter Chen
Title:
Director
a company of:
Edimax Technology Co., Ltd.
No. 278, Xinhu 1st Rd., Neihu Dist.,
Taipei City, Taiwan
Edimax Technology Europe B.V.
Fijenhof 2,
5652 AE Eindhoven,
The Netherlands
Date & Place of Issue: 30/March/2022, Eindhoven
Signature:
Printed Name:
David Huang
Title:
Director
8
Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the
equipment described below complies with the requirements of the United Kingdom
EMC and Safety directives.
Equipment:
IEEE 802.3bt Gigabit 90W PoE+Injector
1-port Giga Ethernet 60W PoE Injector
Model No.:
GP-103IT
GP-102IT
The following European standards for essential requirements have been followed:
Electromagnetic Compatibility Regulations 2016 (S.I. 2016/1091)
EMC
:
EN 55032:2015+A11:2020
EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1:2019
EN 55035:2017+A11:2020
Safety (LVD)
:
EN 62368-1:2014+A11:2017
Date & Place of Issue: 30/March/2022, Taipei
Signature:
Printed Name:
Hunter Chen
Title:
Director
a company of:
Edimax Technology Co., Ltd.
No. 278, Xinhu 1st Rd., Neihu Dist.,
Taipei City, Taiwan
Edimax Technology Europe B.V.
Fijenhof 2,
5652 AE Eindhoven,
The Netherlands
Date & Place of Issue: 30/March/2022, Eindhoven
Signature:
Printed Name:
David Huang
Title:
Director
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
în alte limbi
- English: Edimax GP-103IT Installation guide
- italiano: Edimax GP-103IT Guida d'installazione
Lucrări conexe
-
Edimax GP-102IT Ghid de instalare
-
Edimax IEW-7811UTC Ghid de instalare
-
Edimax AX1800 Ghid de instalare
-
-
Edimax EW-7811ULC Ghid de instalare
-
-
Edimax BT-8500 Ghid de instalare
-
-
Edimax EW-7822UAC Ghid de instalare