Edimax EN-9320TX-E V2 10 Gigabit Ethernet PCI Express Server Adapter Ghid de instalare

Tip
Ghid de instalare
EN-9320TX-E V2 & EN-9225TX-E
Quick Installation Guide
05-2021 / v1.1
Contents
I. Product Information ...................................... 1
I-1. Package Contents ............................................... 2
I-2. Driver Support / System Requirements .......................... 3
I-3. LED Indicator .................................................... 3
I-4. Hardware Overview ............................................. 4
II. Hardware Installation ................................... 5
III. Install Driver ................................................ 7
III-1. Driver Installation ......................................................................... 7
III-2. Driver Uninstallation .................................................................... 8
1
I. Product Information
The two hyper speed Edimax 10G EN-9320TX-E V2 and 2.5G EN-9225TX-E
Network Cards each ensure backward compatibility with your network
infrastructure.
The 10G EN-9320TX-E V2 Network Card provides and supports fast 10G speed
with backwards compatibility of 10GbE, 5GbE, 2.5GbE, 1GbE and 100MbE
networking standard that delivers a speed of up to 10Gbps which is 10 times
faster than standard gigabit Ethernet. The other 2.5G 3 speeds EN-9225TX-E
Network Card provides 2.5GbE, 1GbE and 100MbE networking standard.
And whats more, both of the network cards support QoS that helps improve
your router’s Internet traffic management capabilities through better
bandwidth allocation.
You can find all supporting documents from the link below or via QR Code:
https://www.edimax.com/download
(Once youve visited the Edimax official website, please enter the model no.
EN-9320TX-E V2 or EN-9225TX-E into the search box to search for your
product.)
2
I-1. Package Contents
Please refer to your product for the illustrations below,
LED
EN-9320TX-E V2 or
QIG
Low Profile Bracket
EN-9225TX-E
3
I-2. Driver Support / System Requirements
EN-9320TX-E V2:
- Windows 7, 8, 8.1,10 (32/64-bit)
- Linux kernels support to 3.0 ~ 4.9
EN-9225TX-E:
- Windows 7, 8, 8.1,10 (32/64-bit)
- Linux kernels support to 3.1, 3.12, 3.2, 4.2, 4.4
I-3. LED Indicator
EN-9320TX-E V2:
EN-9225TX-E
Color
LED Status
Description
Yellow
On
5Gbps
/
2.5Gbps
/
1Gbps/ 100Mbps
Green
On
- 10Gbps
- No data transmission
Blinking
Green light blinking when transmitting
data
Color
LED Status
Description
Yellow
On
1Gbps / 100Mbps
Green
On
- 2.5Gbps
- No data transmission
Blinking
Green light blinking when transmitting
data
4
I-4. Hardware Overview
EN-9320TX-E V2 & EN-9225TX-E:
Description
RJ45 Port
Standard Profile Bracket
PCI-E (EN-9320TX-E V2 X4/EN-9225TX-E X1)
1
2
3
1
2
3
5
II. Hardware Installation
Please follow the instructions below to install the network adapter in your PC,
1. Turn off the PC and unplug the power cord.
2. Remove the side panel of the computer by unscrewing it and identify
empty PCI-E slot.
3. Install the card by firmly pressing it into the expansion slot,
6
4. Reattach the side panel and put the power cord back
7
III. Install Driver
Please follow the instructions below to install and uninstall the driver.
III-1. Driver Installation
You can find diver from the Edimax website below or via QR Code:
https://www.edimax.com/download
(Once youve visited the Edimax official website, please enter the model no.
EN-9320TX-E V2 or EN-9225TX-E into the search box to search for your
product.)
Click on download button to visit download page:
8
III-2. Driver Uninstallation
For Windows 10:
1. Open Control Panel using the Start menu or Search function.
2. Select Uninstall a program under the programs category.
9
3. Select Edimax (or similar) and click Uninstall)
10
COPYRIGHT
Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication
may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language or computer language, in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written
permission from Edimax Technology Co., Ltd.
Edimax Technology Co., Ltd. makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any warranties,
merchantability, or fitness for any particular purpose. Any software described in this
manual is sold or licensed as is. Should the programs prove defective following their
purchase, the buyer (and not this company, its distributor, or its dealer) assumes the
entire cost of all necessary servicing, repair, and any incidental or consequential damages
resulting from any defect in the software. Edimax Technology Co., Ltd. reserves the right
to revise this publication and to make changes from time to time in the contents hereof
without the obligation to notify any person of such revision or changes.
The product you have purchased and the setup screen may appear slightly different from
those shown in this QIG. The software and specifications are subject to change without
notice. Please visit our website www.edimax.com for updates. All brand and product
names mentioned in this manual are trademarks and/or registered trademarks of their
respective holders.
11
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Any changes or modifications not expressly approved by the
party responsible for compliance could void the authority to operate equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However, special
attention must be paid to the dangers of electric shock and static electricity when working with electrical
equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to
ensure the safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI
version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and
Switzerland.
EU Countries Not Intended for Use
None
12
EU Declaration of Conformity
English: This equipment is in compliance with the essential requirements and other relevant
provisions of Directive 2014/30/EU.
Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la
directive 2014/30/EU.
Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními
směrnic 2014/30/EU.
Polski: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami
określonymi Dyrektywą UE 2014/30/EU.
Română: Acest echipament este în conformitate cu cerinţele esenţiale şi alte prevederi relevante ale
Directivei 2014/30/EU.
Русский: Это оборудование соответствует основным требованиям и положениям Директивы
2014/30/EU.
Magyar: Ez a berendezés megfelel az alapvető követelményeknek és más vonatkozó irányelveknek
(2014/30/EU).
re: Bu cihaz 2014/30/EU. direktifleri zorunlu istekler ve diğer hükümlerle ile uyumludur.
Українська: Обладнання відповідає вимогам і умовам директиви 2014/30/EU.
Slovenčina: Toto zariadenie spĺňa základné požiadavky a ďalšie príslušné ustanovenia smerníc
2014/30/EU.
Deutsch: Dieses Gerät erfüllt die Voraussetzungen gemäß den Richtlinien 2014/30/EU.
Español: El presente equipo cumple los requisitos esenciales de la Directiva 2014/30/EU.
Italiano: Questo apparecchio è conforme ai requisiti essenziali e alle altre disposizioni applicabili
della Direttiva 2014/30/EU.
Nederlands: Dit apparaat voldoet aan de essentiële eisen en andere van toepassing zijnde bepalingen
van richtlijn 2014/30/EU.
Português: Este equipamento cumpre os requesitos essênciais da Directiva 2014/30/EU.
Norsk: Dette utstyret er i samsvar med de viktigste kravene og andre relevante regler i Direktiv
2014/30/EU.
Svenska: Denna utrustning är i överensstämmelse med de väsentliga kraven och övriga relevanta
bestämmelser i direktiv 2014/30/EU.
Dansk: Dette udstyr er i overensstemmelse med de væ sentligste krav og andre relevante
forordninger i direktiv 2014/30/EU.
suomen kieli: Tämä laite täyttää direktiivien 2014/30/EU. oleelliset vaatimukset ja muut asiaankuuluvat
määykset.
-----------------------------------------------------------------------------------------------------------------------
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as household or general waste. It
should be handed over to the applicable collection point for the recycling of electrical and electronic
equipment, or returned to the supplier for disposal.
13
Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the
equipment described below complies with the requirements of the European Radio
Equipment directives.
Equipment:
3-speed 2.5GBase-T / NBASE-T Network Adapter Card
Model No.:
EN-9225TX-E
The following European standards for essential requirements have been followed:
Directives 2014/30/EU
Spectrum
:
EN 55032:2015+AC:2016 Class B
AS/NZS CISPR 32:2015 Class B
EN 55035:2017
Date of Signature:
Jan., 2020
Signature:
Printed Name:
Albert Chang
Title:
Director
Edimax Technology Co., Ltd.
Edimax Technology Europe B.V.
Fijenhof 2,
5652 AE Eindhoven,
The Netherlands
a company of:
Edimax Technology Co., Ltd.
No. 278, Xinhu 1st Rd.,
Neihu Dist., Taipei City,
Taiwan
Printed Name:
David Huang
Title:
Director
Edimax Technology Europe B.V.
14
Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the
equipment described below complies with the requirements of the European Radio
Equipment directives.
Equipment:
5-speed 10GBase-T / NBASE-T Network Adapter Card
Model No.:
EN-9320TX-E V2
The following European standards for essential requirements have been followed:
Directives 2014/30/EU
Spectrum
:
EN 55032:2015+AC:2016 Class B
EN 55035:2017
AS/NZS CISPR 32:2015 Class B
CISPR 32:2015+C1:2016 Ed. 2.0 Class B
Date of Signature:
Jan., 2020
Signature:
Printed Name:
Albert Chang
Title:
Director
Edimax Technology Co., Ltd.
Edimax Technology Europe B.V.
Fijenhof 2,
5652 AE Eindhoven,
The Netherlands
a company of:
Edimax Technology Co., Ltd.
No. 278, Xinhu 1st Rd.,
Neihu Dist., Taipei City,
Taiwan
Printed Name:
David Huang
Title:
Director
Edimax Technology Europe B.V.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Edimax EN-9320TX-E V2 10 Gigabit Ethernet PCI Express Server Adapter Ghid de instalare

Tip
Ghid de instalare