Revolabs Executive HD Microphone System — Tandberg C60/C90 Setup
This setup guide will guide you through the steps needed to properly connect a
Revolabs Executive HD Microphone System to a Tandberg C60 or C90 video codec.
Note:
It is important to
carefully follow these instructions in order and completely.
Otherwise your
Executive HD Microphone System and/or the
video codec may not
function properly. Please read through these instructions completely before
proceeding. Contact Yamaha Unified Communications, Inc. technical support:
if you have any questions.
Requirements for connecting systems:
1. Revolabs Executive HD 4 or 8 channel Microphone System
2. Tandberg C60 or C90 video codec
3. XLR male to mini-Phoenix cables
NOTE: The Tandberg C60 has 4 microphone inputs and the C90 has 8
microphone inputs. Therefore, the 4-channel Executive HD will interface
directly only to the C60 while both the 4 and 8 channel Executive HD
systems will interface directly with the C90.
NOTE:
IMAGES OF SET UP SCREENS ARE DEFAULT SETTINGS FROM TANDBERG AND ARE PART OF
THE TANDBERG CODEC C90 ADMINISTRATOR’S GUIDE © JULY 2009