Electrolux EPI18LEIWE Manual de utilizare

Marca: Electrolux

Model: EPI18LEIWE

Tip: Manual de utilizare

EPI09LEIW

EPI12LEIW

EPI18LEIW

EPI24LEIW

EN USER MANUAL 1

HEAT PUMP

SPLIT INVERTER

BOMBA DE CALOR

INVERSOR SPLIT

MANUAL DE UTILIZARE

SISTEM DE CLIMATIZA-

RE CU POMPĂ DE

CĂLDURĂ ŞI INVERTOR

DE TIP SPLIT

MANUAL DO UTILIZADOR

MANUAL DE INSTRUCCIONES

BOMBA DE CALOR

INVERSOR SPLIT

1 www.electrolux.com

Contents

1. Safety precautions ................................................................................................ 3

2. Description ............................................................................................................ 6

3. Remote control ..................................................................................................... 6

4. Cleaning and maintenance ................................................................................. 11

5. Troubleshooting .................................................................................................. 12

6. Operation tips ..................................................................................................... 14

7. Installation .......................................................................................................... 15

WE’RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings

with it decades of professional experience and innovation. Ingenious and stylish, it has

been designed with you in mind. So whenever you use it, you can be safe in the

knowledge that you’ll get great results every time. Welcome to Electrolux.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.electrolux.com

www.electrolux.com/productregistration

Buy Accessories, Consumables and Original spare parts for your

appliance: www.electrolux.com/shop

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts.

When contacting Service, ensure that you have the following data available.

The information can be found on the rating plate. Model, PNC, Serial Number.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

ENGLISH 2

1. SAFETY PRECAUTIONS

 Read the manual carefully before operation.

 Keep the manual for further reference.

 This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the

appliance. Cleaning and user maintenance shall not be

made by children without supervision.

 If something abnormal occurs (e.g. unpleasant smells of

burning), disconnect the unit from the power supply and

contact an authorised service centre. If the abnormality

remains, the air conditioner may be damaged or even

cause electric shock or fire.

 Before cleaning or maintenance, switch off the unit and

disconnect the unit from the power supply. If the unit is

connected to a fuse box, remove the fuse.

 If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified

persons in order to avoid a hazard.

 Do not use an unspecified mains cord to prevent electric

shock or fire.

 The unit must be installed according to national regulations

for electrical safety. Incorrect wiring can lead to over heat

or fire in the cable, the plug or the electrical outlet.

 Do not switch on and off the unit frequently.

 If the voltage is too high, electrical elements will be

damaged easily, If the voltage too low, the compressor will

vibrate fiercely and damage the cooling system or the

compressor. Electrical components cannot be operated.

 Make sure that the unit is properly grounded to prevent

electric shock.

3 www.electrolux.com

 Do not attempt to repair the unit yourself to prevent electric

shock or fire. Have the unit repaired by an authorised

service centre.

 Keep combustible materials at least 1 m from the unit to

prevent fire or explosion.

 Install the outdoor unit firmly to prevent personal injury.

 Do not stand on the outdoor unit. Do not place heavy

things on the outdoor unit.

 Do not block the air inlet or the air outlet.

 Do not splash water on the unit to prevent electric shock.

 Do not operate the unit with wet hands to prevent electric

shock.

 Do not insert your hands or objects into the air inlet or the

air outlet.

 Do not expose animals or plants directly to the air flow.

 Do not expose yourself to cold air directly for a long time.

 Do not use the unit for any other purpose, such as

preserving food or drying clothes.

 Select the most appropriate temperature to save electric

energy.

 Do not keep windows and doors open for a long time

during operation.

 To change the airflow direction, use remote control to

adjust the horizontal and vertical airflow direction.

ENGLISH 4

 Do not dispose this product as unsorted municipal waste.

Collection of such waste separately for special treatment is

necessary.

Correct Disposal of this product

This marking indicates that this product should not be disposed

with other household wastes throughout the EU. To prevent

possible harm to the environment or human health from

uncontrolled waste disposal, recycle it responsibly to promote

the sustainable reuse of material resources. To return your

used device, please use the return and collection systems or

contact the retailer where the product was purchased. They can

take this product for environmental safe recycling.

You can also get this manual through your local distributor

or by visiting our website.

Please find the Electrolux web addresses to your local country from below table.

Country

Website address Country Website address

Albania www.electrolux.al Netherlands www.electrolux.nl

Austria www.electrolux.at Norway www.electrolux.no

Belgium www.electrolux.be Poland www.electrolux.pl

Bulgaria www.electrolux.bg Portugal www.electrolux.pt

Croatia www.electrolux.hr Romania www.electrolux.ro

Czech Republik www.electrolux.cz Serbia www.electrolux.rs

Denmark www.electrolux.dk Slovakia www.electrolux.sk

Finland www.electrolux.fi Slovenia www.electrolux.sl

France www.electrolux.fr Spain www.electrolux.es

Germany www.electrolux.de Sweden www.electrolux.se

Greece www.electrolux.gr Switzerland www.electrolux.ch

Hungary www.electrolux.hu Turkey www.electrolux.com.tr

Italy www.electrolux.it UK & Ireland www.electrolux.co.uk

Luxembourg www.electrolux.lu

Please visit www.electrolux.com for more information.

5 www.electrolux.com

2. DESCRIPTION

3. REMOTE CONTROL

The remote control can be used for

different models. Depending on the

model, some functions on the remote

control might not be available.

CAUTION



Do not drop or throw the remote

control.



Do not pour liquid onto the remote

control.



Do not expose the remote control

to direct sunlight.

 Do not place the remote control in

areas where it is very hot.

Indoor unit

Air inlet (indoor unit)

Air outlet (indoor unit)

Outdoor unit

Air inlet (outdoor unit)

Air outlet (outdoor unit)

Mains cord

Remote control

Front panel

Filter

Horizontal louvre

Wall pipe

Binding tape

Connection pipe

Drain hose

Drain connector

ENGLISH 6

Explanation of buttons

No. Button Explanation

ON/OFF

Press the button to switch on the unit. Press the button again

to switch off the unit.

MODE

Press the button to set the operation mode: AUTO, COOL,

DRY, HEAT and FAN. Default setting: AUTO.

In the AUTO mode, the initial value is 24 °C.

FAN

Press the button to set the fan speed: AUTO, LOW, MEDIUM

and HIGH. Default setting: AUTO. In the DRY mode, only

LOW can be set.

UP ^

Press the button to increase the temperature. Each press will

increase the setting temperature 1 °C increments. Release

the button to set the temperature and send the order, then

the setting temperature will be displayed constantly.

Temperature range: 17-30 °C.

In FAN mode, the temperature cannot be set.

DOWN v

Press the button to increase the temperature. Each press will

increase the setting temperature 1 °C increments. Release

the button to set the temperature and send the order, then

the setting temperature will be displayed constantly.

Temperature range: 17-30 °C.

In FAN mode, the temperature cannot be set.

LED

Press the button to switch the display of the indoor unit on or

off. Default setting: OFF.

TURBO

In COOL or HEAT mode, press the button to enable or

disable the turbo function. If the turbo function is enabled, the

turbo symbol will be shown. Default setting: OFF.

If the turbo function is enabled, the unit will operate at turbo

speed to cool or heat rapidly so that the ambient temperature

approaches the set temperature as soon as possible.

If the operation mode or the fan speed is changed, the turbo

function will be canceled.

TIMER ON

Press this button to initiate the auto-on time sequence. Each

press will increase the auto-timed setting in 30 minutes

increments. When the setting time displays 10, each press

will increase the auto-timed setting 60 minutes increments.

To cancel the auto-timed program, simply adjust the auto-on

time to 0.0.

7 www.electrolux.com

TIMER OFF Press this button to initiate the auto-off time sequence. Each

press will increase the auto-timed setting in 30 minutes

increments. When the setting time displays 10, each press

will increase the auto-timed setting 60 minutes increments.

To cancel the auto-timed program, simply adjust the auto-off

time to 0.0.

DIRECT Used to change the louver movement and set the desired

up/down air flow direction. The louver changes 6° in angle

for each press.

SWING Used to stop or start horizontal louver auto swing feature.

FRESH Press this button to enable or disable the clean air function. If

the clean air function is enabled the clean air symble on the

indoor unit display will be shown.

This air conditioner is equipped with ionizer or Plasma Dust

Collector(Depending on specific configuration of the model).

With the anions generated by Ionizer, the air circulation of the

air conditioner fills the room with refreshing, natural and

healthy air. The Plasma Dust Collector generates a high

voltage ionization zone, through which the air is converted to

plasma. Inside the air most of the dust, smoke, and pollen

particles are captured by the electrostatic filter.

SLEEP Press the button to enable or disable the SLEEP function,

during AUTO, COOL or HEAT mode

If you enable SLEEP function under COOL mode, the air

conditioner will automatically increase setting temperature

1°C per hour for the first 2 hours, then hold steadily for

thenext 5 hours, after that it will switch off. This mode saves

you energy and brings you comfort at night.

If you enable SLEEP function under HEAT mode, the air

conditioner will automatically decrease setting temperature

1°C per hour for the first 2 hours, then hold steadily for

thenext 5 hours, after that it will switch off. This mode saves

you energy and brings you comfort at night.

SELF-

CLEAN

Press the button to enable or disable the SELF-CLEAN

function, during AUTO (cooling), COOL or DRY mode.

The unit will operate as following sequence : FAN ONLY

mode at Low fan speed--Heating operation with LOW fan

speed(applicable to cooling & heating modles only) --FAN

ONLY operation--Stop Operation---Turn off.

This function is only available under COOL(AUTO COOL,

FORCED COOL) and DRY mode.

ENGLISH 8

Before select the function, it is recommended to run the air

conditioner under Cooling operation for about half an hour.

Once the Self Clean function is activated, all TIMER setting

will be cancelled.

During Self Clean operation, when press the SELF CLEAN

button on the remote controller again will stop the

operation and turn off the unit automatically.

Push this button to initiate the Follow Me feature, the remote

display is actual temperature at its location. The remote

control will send this signal to the air conditioner every 3

minutes interval until press the Follow Me button again. The

air conditioner will cancel the Follow Me feature

automatically if it does not receive the signal during any 7

minutes interval.

SHORTCUT Used to restore the current settings or resume previous

settings.

Push this button when remote controller is on, the system

will automatically revert back to the previous settings

including operating mode, setting temperature, fan speed

level and sleep feature(if activated). And transmit the signals

to the unit.

If push this button when remote controller is off, the system

will only resume the previous settings and will not transmit

the signals to the unit. And the sleep feature is disable.

If pushing more than 2 seconds, the system will

automatically restore the current operation settings including

operating mode, setting temperature, fan speed level and

sleep feature(if activated ).

3.1. General operation

1. Disconnect the unit from the power

supply.

2. Press the ON/OFF button to start

the unit.

3. Press the MODE button to set the

operation mode.

4. Press the UP and DOWN buttons

to set the temperature. (Note: It is

unnecessary to set the

temperature in FAN mode.)

5. Press the FAN button to set the

fan speed.

6. Press the DIRECT and SWING

buttons to set the swing.

3.2. Optional operation

1. Press the SLEEP button to enable

or disable the sleep mode.

2. Press the TIMER ON and TIMER

OFF buttons to enable or disable

the timer function.

3. Press the LED button to turn on or

to turn off the display of the indoor

unit.

4. Press the TURBO button to enable

or disable the turbo function.

3.3. Special functions

AUTO mode

The unit automatically sets the

operation mode

9 www.electrolux.com

3.4. Replacing the batteries

The remote control operates with two

1.5V AAA batteries.

1. Open the battery compartment.

2. Remove the old batteries.

3. Insert the new batteries. Make sure

that the positive (+) and negative (-)

markings on the batteries match the

positive (+) and negative (-)

markings on the battery

compartment.

4. Close the battery compartment.

CAUTION



Always use new batteries of the same

type. Do not use old batteries or

different batteries types.



Remove the batteries when the

remote control will not be used for a

long time.

NOTE:



Operate the remote control within its

transmitting and receiving range.



Operate the remote control at least

1 m away from your TV set or stereo

sound set.



Aim the remote control at the receiver

of the main unit to improve the

receiving sensitivity of the main unit.



If the remote control transmits a

signal, the transmitting symbol will

blink. The bell will ring if the main unit

receives the signal.



If the remote control does not operate

normally, remove the batteries and

insert them again 30 seconds later.

If the remote control still does not

operate normally, replace the

batteries.

3.5. Emergency operation

Units are equipped with a switch to run

emergency operation mode. It can be

accessed by opening the front panel.

This switch is used for manual operation

in case the remote controller fails to

work or maintenance necessary.

1. Open and lift the front panel up to an

angle until it remains fixed with a

clicking sound. For some models,

please use suspension bars to prop

up the panel.

2. One press of the manual control

switch will lead to the forced AUTO

operation. If press the switch twice

within five seconds, the unit will

operate under forced COOL operation.

To turn off the unit, press the switch

again.

3. Close the panel firmly to its original

position

NOTE



The unit must be turned off before

operating the manual control button. If

the unit is operational, continue

pressing the manual control button

until the unit is off.



To restore the remote controller

operation, use the remote controller

directly.

ENGLISH 10

4. CLEANING AND MAINTENANCE

WARNING



Before cleaning and maintenance,

disconnect the unit from the power

supply.



Do not immerse the unit in water or

other liquids. If the unit is immersed in

water or other liquids, do not remove

the unit with your hands. Immediately

disconnect the unit from the power

supply. If the unit is immersed in

water or other liquids, do not use the

unit again.



Do not splash water on the unit to

prevent electric shock.

CAUTION



Do not use aggressive liquids (e.g.

thinner or gasoline) to clean the unit.

Clean the unit using a soft, dry cloth

or a cloth slightly moistened with

water or cleaner.

4.1. Cleaning the front panel

1. Remove the front panel.

2. Clean the front panel using a cloth

slightly moistened with water.

3. Install the front panel.

4.2. Cleaning the air filter

The air filter must be cleaned every

3 months.

Air freshening filter

WARNING



Do not touch the fin of the indoor unit

to prevent personal injury.

CAUTION



Do not use water above 45 °C to

clean the air filter to prevent

deformation or discoloration.

1. Open the front panel.

2. Remove the air filter.

3. Remove dust from the air filter using

a vacuum cleaner.

4. If the air filter is dirty, clean the air

filter with warm water and a mild

detergent. Allow the air filter to dry

naturally in a cool, dark place.

5. Install the air filter.

6. Close the front panel.

4.3.

Check before use



Make sure that nothing obstructs the

air inlet or the air outlet.



Make sure that the installation stand

of the outdoor unit is not damaged. If

the installation stand is damaged,

consult a qualified technician.



Make sure that the batteries are

inserted into the remote control.

4.4.

Maintenance after use



Disconnect the unit from the power

supply.



Clean the filters and the housings of the

indoor unit and the outdoor unit.



Remove any obstructions from the

outdoor unit.

Filter Handle

11 www.electrolux.com

5. TROUBLESHOOTIN

CAUTION



The unit is not user-serviceable. Do

not attempt to repair the unit yourself

to prevent electric shock or fire. Have

the unit repaired by an authorised

service centre. The following checks

can save you time and money before

consulting an authorised service

centre.

Problem

Solution

The unit does not operate.

The unit does not operate if it is switched on

immediately after switching off the unit. After

switching off the unit, wait for approximately 3

minutes before switching on the unit.

Odours are emitted.

Some odours may be emitted from the indoor

unit as the result of room smells (furniture,

tobacco, etc.) which have been taken into the

unit. If the odours persist, contact an

authorised service centre.

Water-flowing noise.

The water-flowing noise is the refrigerant

flowing inside the unit.

Mist is emitted in COOL mode.

During cooling operation, mist may be emitted

from the indoor unit due to high room

temperature and humidity. The mist will

disappear if the room temperature and

humidity decrease.

Cracking noise.

The cracking noise is the sound of friction

caused by expansion and/or contraction of the

front panel or other parts due to the change in

temperature.

The unit cannot be started.

Is the unit disconnected from the power

supply?

Is the mains plug loose?

Is the circuit protection device tripped off?

Is the voltage higher or lower? (tested by

professionals)

Is the timer function used correctly?

The cooling/heating effect is poor. Is the temperature set correctly?

Is the air inlet or the air outlet blocked?

Is the air filter dirty?

Is the window or the door open?

Is a low fan speed set?

Are there heat sources in the room?

ENGLISH 12

The remote control does not

work.

Is there any magnetic or electrical

interference near the unit? If yes, remove

and reinsert the batteries.

Is the remote control within its transmitting

and receiving range without any

obstructions? If necessary, replace the

batteries.

Is the remote control damaged?

Water leakage in indoor unit. The room humidity is high.

Condensing water overflows.

The drain hose is loose.

Water leakage in outdoor unit.

In COOL mode, water condensate is

generated around the pipes and connection

joints.

In HEAT mode, the water on the heat

exchanger drips out.

In defrost mode, the thaw water flows out.

Noise from indoor unit.

The noise emitted when the fan or

compressor relay is switched on or off.

If the defrost mode is started or stopped, you

will hear the sound of refrigerant flowing in

the reverse direction.

The indoor unit cannot blow air.

In HEAT mode, when the temperature of the

indoor heat exchanger is low, the airflow is

stopped within a few minutes in order to

prevent cold air.

In HEAT mode, when the outdoor

temperature is low or the outdoor humidity is

high, frost will be formed on the outdoor heat

exchanger. The unit will defrost automatically

and the indoor unit will stop blowing air for 4-

10 minutes.

In defrost mode, water or vapour may be

emitted.

Moisture on air outlet.

If the unit operates at high humidity for a long

time, moisture will be generated on the grill

of the air outlet.

If one of the following code

appears on the display area :

E0,E1,E2,E3...or P0,P1,P2,P3...

Stop the air conditioner immediately,

disconnect the power and then connect it in

again. If the problem still exists, disconnect

the power and contact the nearest customer

service center.

There is harsh sound during

operation.

Immediately stop operation, disconnect the

unit from the power supply and contact an

authorised service centre.

Strong odours are emitted during Immediately stop operation, disconnect the

13 www.electrolux.com

operation. unit from the power supply and contact an

authorised service centre.

Water is leaking from the indoor

unit.

Immediately stop operation, disconnect the

unit from the power supply and contact an

authorised service centre.

The air switch or protection switch

often interrupts power supply.

Immediately stop operation, disconnect the

unit from the power supply and contact an

authorised service centre.

Water or other liquid is splashed

into the unit.

Immediately stop operation, disconnect the

unit from the power supply and contact an

authorised service centre.

Mains cord and mains plug are

overheated.

Immediately stop operation, disconnect the

unit from the power supply and contact an

authorised service centre.

6. OPERATION TIPS

6.1. Cooling operation

Air conditioners absorb heat from indoor

and transmit the heat to the outdoor unit

in order to decrease the room

temperature. The cooling capacity will

increase or decrease according to the

outdoor temperature.

Anti-freezing function

COOL mode and in a low ambient

temperature, frost will be formed on the

heat exchanger of the indoor unit. If the

temperature of the heat exchanger

decreases below zero, the compressor

will stop operation to protect the unit.

6.2. Heating operation

Air conditioners absorb heat from

outdoor and transmit the heat to the

indoor unit in order to increase the room

temperature. The heating capacity will

increase or decrease according to the

outdoor temperature.

Defrosting

 If the outdoor temperature is low and

the outdoor humidity is high, frost will

form on the outdoor unit during

extended operation. The heating

capacity will decrease. The unit may

stop operation during defrosting.

 During defrosting, the fan motors of

the indoor unit and outdoor unit will

stop operation.

 During defrosting, the indoor indicator

flashes and the outdoor unit may emit

vapour. This is normal operation to

remove frost from the heat exchanger

of the outdoor unit.

 After defrosting, the heating operation

will resume automatically.

6.3. Refrigerant Leakage

Detection

With this new technology, the dipsplay

area will appear EC and the indication

lamps continue flashing when the

outdoorunit detects refrigerant leakage.

ENGLISH 14

6.4. Anti-cold air function

In HEAT mode, the indoor fan will not

operate in order to prevent cold air from

blowing out if the indoor heat exchanger

does not reach a certain temperature in

one of the following situations:



when the heating operation starts;

 when the defrosting operation is

finished;

 when heating at low temperature.

6.5. Gentle breeze

The indoor unit may blow gentle breeze

and the horizontal louvre rotates to

acertain position in one of the following

situations:



In HEAT mode, the compressor does

not start operation after switching on

the unit.

 In HEAT mode, the temperature

reaches the set value and the

compressor has stopped operation for

1 minute.

6.6. Opetaring temperature

range

The operating temperature range for

cooling-only units is 0-50 ˚C. The

operating temperature range for heat-

pump units is -15-(+30)˚C.

Indoor side (°C) Outdoor side (°C)

Max. cooling 32 50

Min. cooling 17 0

Max. heating 30 30

Min. heating 0 -15

6.7. Tip for energy saving

 Do not overcool or overheat. Setting

the temperature at a moderate level

helps energy saving.

 Cover windows with a blind or a

curtain. Blocking sunlight and air from

outdoor is favorable for cooling.

 Clean air filters every two weeks.

Clogged air filters lead to inefficient

operation and energy waste.

6.8. Tip for relative humidity

 If the unit is operated in an area with

a relative humidity of more than 80%

for a long time, condensate may drip

from the indoor unit.

7. INSTALLATION

7.1. Installation notes

 Not following the instructions can

cause personal injury and/or property

damage.

 Not following the instructions can

cause the unit to fail.

 Let the unit be installed by an

authorised service centre.

 Let the unit be installed in compliance

with local and governmental

regulations.

 Let the unit be installed according to

the instructions from this manual.

 First contact an authorised service

centre before relocating an already

installed unit

 Disconnect power before working on

the unit.

 The mains plug must remain

accessible after installation.

 Keep sufficient distance between the

interconnection cable and the

refrigerant circuit because the circuit

operating temperature is high.

 The pipes connecting the indoor and

outdoor unit are not included in the

unit.

15 www.electrolux.com



The outdoor unit is powered by the

indoor unit.

 This air conditioner uses R410A

refrigerant

7.2. Installation site

 Do not install the unit in areas with:

- strong heat sources;

- vapours or flammable gasses;

- contamination with oil particles;

- high frequency electromagnetic

equipment (e.g. welding equipment or

medical devices);

- high salinity (e.g. close to coastal

areas);

- sulphuric gas (e.g hot water springs);

- poor air quality.

Indoor unit



Maintain the minimum installation

distances specified in this document.

Do not block the air inlet or the air

outlet.

 Do not use the unit in places with

extremely high humidity.

 Install the indoor unit out of reach of

children.

 The wall must be strong enough to

support the weight and vibration of

the unit.

 Install the indoor unit at least 230 cm

above the floor surface.

 Leave sufficient space for cleaning

and maintenance.

 The air filter should remain accessible.

 Leave at least 1 m distance between

the unit and other electrical

appliances.

 Install the indoor unit in a place where

the condensate water can be seaily

drained.

 Install at a location protected from

direct sunlight.

Outdoor unit



Maintain the minimum installation

distances specified in this document.

 Do not block the air inlet or the air

outlet.

 Install the outdoor unit out of reach of

children.

 Install the outdoor unit where there is

sufficient ventilation.

 Install the outdoor unit where

produced noise and airflow will not

disturb neighbors or animals.

 Install the outdoor unit in a dry place.

 Install the outdoor unit in a place not

exposed to direct sunlight or strong

wind.

 Install the unit in a place that supports

the weight and vibration of the unit.

 The height difference between the

indoor unit and the outdoor unit must

be less than 5 m.

 The length of the connecting pipes

must be less than 10 m.

 Leave sufficient space for cleaning.

 The outdoor unit is powered by the

indoor unit.

Safety precautions for electrical

appliances



Use a dedicated mains circuit.

 The unit must be properly grounded.

 Install a Residual-current device

(RCD) to protect against personal

injury in case of leakage currents.

 Use an all pole disconnection switch

with a contact separation of at least 3

mm in all poles in fixed wiring. For

models with a mains plug, make sure

that the mains plug is within reach

after installation.

 The installation must comply with

local electrical safety regulations and

with other relevant local regulations

 The unit must be installed in

accordance with national wiring

regulations.

 Do not subject the mains cable to

force.

ENGLISH 16

 The distance between the unit and

heat sources is at least 1.5 m.

 Use an circuit breaker. The air switch

must have functions for magnetic

tripping.

and heat tripping to prevent short

circuit and overload. The suitable

capacity is specified in the following

table.

Cooling Capacity (BTU) Circuit Breaker

9,000 16A

12,000-18,000 20A

24,000 25A

NOTE

 Make sure that the live wire, the

neutral wire and the ground wire in

the mains socket are properly

connected.

 Inadequate or incorrect electrical

connections can cause electric shock

or fire.

Grounding requirements



The unit is a type I electrical

appliance. Make sure that the unit is

properly grounded.

 The yellow-green wire is the ground

wire that cannot be used for other

purposes. Improper grounding can

cause electric shock.

 The ground resistance must comply

with local regulations.

 The mains supply must have reliable

ground terminal. Do not connect the

ground wire to water pipes, gas pipes,

contamination pipes or other possible

unsafe places.

 Fuses must comply with the

prescribed model and rating printed

on the fuse cover or circuit board.

17 www.electrolux.com

7.3. Installation drawing

The dimensions required for proper

installation of the unit include the

minimum permissible distances to

adjacent parts.

* Recommended distance for

maximum airflow is 15 cm.

ENGLISH 18

7.4. Indoor unit

Installing the mounting plate



Fit the installation plate horizontally

on structural parts of the wall with

spaces around the installation plate.

 If the wall is made of brick, concrete

or the like, drill five or eight 5mm

diameter holes in the wall. Insert Clip

anchor for appropriate mounting

screws.

 Fit the installation plate on the wall

with five or eightSelf-tapping Screw

ST3.9x25.

NOTE:



Mount the Installation Plate and drill

holes in the wall according to the wall

structure and corresponding mounting

points on the installation plate.

 The installation plate provided

 with the machine differ from appliance

to appliance.

 Dimensions are in mm unless

otherwise stated.

150mm or more to ceiling

120mm or

more to wall

120mm or

more to wall

Indoor unit outline

18000Btu/h models

Left rear side

refrigerant pipe

hole Ø 65

Right rear side

refrigerant pipe

hole Ø 65

12000Btu/h models

120mm or

more to wall

120mm or

more to wall

Left rear side

refrigerant pipe

hole Ø 65

Right rear side

refrigerant pipe

hole Ø 65

150mm or more to ceilin

Indoor unit outline

150mm or more to ceiling

120mm or

more to wall

Left rear side

refrigerant pipe

hole Ø 65

9000Btu/h models

120mm or

more to wall

Indoor unit outline

Right rear side

refrigerant pipe

hole Ø 65

19 www.electrolux.com

Drill piping hole

1. Slant the piping hole (Ø 65 mm) on

the wall slightly downward to the

outdoor side.

2. Insert the piping-hole sleeve into the

hole to prevent damage to the

connection piping and wiring.

Installing the drain hose

1. Connect the drain hose to the outlet

pipe of the indoor unit. Bind the joint

with rubber belt.

2. Put the drain hose into the insulating

tube.

3. Wrap the insulating tube with wide

rubber belt to prevent the insulating

tube from shifting. Slant the drain

hose slightly downward for smooth

drainage of the condensate water.

NOTE



The insulating tube must be

connected reliably with the sleeve

outside the outlet pipe. The drain

must be slanted downward slightly

without distortion, bulge or fluctuation.

Do not put the outlet of the drain hose

in water to prevent the drain hose

from freezing.

Wiring connection of indoor unit

Terminal block of indoor unit

CAUTION



Check the wiring to make sure that

there is no short circuit. Incorrect

wiring can cause malfunction.



Ensure the colour of wires of outdoor

unit and the terminal Nos. are the

same to the indoor’s respectively.



The indoor power cord (purchared on

local) type is H05VV-F or H05V2V2-F,

the outdoor power cord and

interconnected cord type is H07RN-F.

150mm or more to ceilin

Right rear side

refrigerant pipe

hole Ø 65

120mm or

more to wall

Installation plate

24000Btu/h models

120mm or

more to wall

Indoor unit outline

Left rear side

refrigerant pipe

hole Ø 65

Front Panel

Electronic

box cover

Wall

Indoor

Outdoor

5-7 mm

To outdoor unit

2(N)

1(L)

Pagina se încarcă ...

Electrolux EPI18LEIWE Manual de utilizare

Marca: Electrolux

Model: EPI18LEIWE

Tip: Manual de utilizare

Descărcați PDF

raport

în alte limbi

English: Electrolux EPI18LEIWE User manual
español: Electrolux EPI18LEIWE Manual de usuario
português: Electrolux EPI18LEIWE Manual do usuário

Electrolux EPI18LEIWE Manual de utilizare

Electrolux EPI18LEIWE Manual de utilizare

în alte limbi

Alte documente