Electrolux EW1267F Manual de utilizare

132 997 230

EW 1067 F

EW 1267 F

HR

UPUTE ZA UPORABU

PERILICA RUBLJA

132997230•gb 19-04-2001 15:24 Pagina 1

2

Dear customer,

Please read these operating instructions carefully

and pay particular attention to the safety notes

indicated in the first pages. We recommend that you

keep this instruction booklet for future reference and

pass it on to any future owners.

Transport damages

When unpacking the appliance, check that it is not

damaged. If in doubt, do not use it and contact the

Service Centre.

The symbols you will see on some paragraphs of this booklet have the following meaning:

The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly

important for your safety or correct functioning of the appliance.

The information marked with this symbol provides additional instructions and practical tips on the use of

the appliance.

Tips and information about economical and ecological use of the machine are marked with this symbol.

Our contribution to the protection of the

environment: we use recycled paper.

132997230•gb 19-04-2001 15:24 Pagina 2

ENGLISH

Contents

3

Maintenance 22

Bodywork 22

Detergent dispenser drawer 22

Drain filter 22

Water inlet filter 22

Emergency emptying out 23

Frost precautions 23

Something not working? 24-25

Warnings 4-5

Disposal 5

Tips for environmental protection 5

Technical specifications 6

Installation 7

Unpacking 7

Positioning 7

Water inlet 7

Water drainage 8

Electrical connection 8

Your new washing machine 9

Description of the appliance 9

Door locked pilot light 9

Detergent dispenser drawer 9

Use 10

Control panel 10

Controls 10-13

Functions 13

Programme information 14

Washing hints 15

Sorting the laundry 15

Temperatures 15

Before loading the laundry 15

Maximum loads 15

Laundry weights 15

Removing stains 15

Detergents and additives 16

International wash code symbols 17

Operating sequence 18-19

Washing programmes 20

Special programmes 21

132997230•gb 19-04-2001 15:24 Pagina 3

Warnings

4

Installation

• All internal packing must be removed before using

the appliance. Serious damage may be caused to

the machine or adjacent furniture if the protective

transit devices are not removed or are not

completely removed. Refer to the relevant

paragraph in the instruction book.

• Any electrical work required to install this appliance

must be carried out by a qualified electrician.

• Any plumbing work required to install this

appliance must be carried out by a qualified

plumber.

• After having installed the machine, check that it is

not standing on its electrical supply cable.

• If the appliance is placed on a carpeted floor,

ensure that air can circulate freely between the feet

and the floor.

Use

• This appliance is designed for domestic use. It

must not be used for purposes other than those for

which it was designed.

• Only wash fabrics which are designed to be

machine washed. Follow the instructions on each

garment label.

• Do not overload the appliance. Follow the

instructions in the instruction book.

• Make sure that all pockets are empty. Objects such

as coins, safety pins, pins and screws can cause

extensive damage.

• Do not machine wash garments saturated with

petroleum, methylated spirits, trichlorethylene, etc.

If such fluids have been used to remove stains

prior to washing, wait until they have completely

evaporated from the fabric before placing garments

in the appliance.

• Place small items such as socks, belts, etc. in a

cloth bag or pillowcase to prevent them getting

trapped between the drum and the tub.

• Use only the recommended quantities of fabric

softener. An excessive amount could damage the

laundry.

• Leave the porthole door slightly ajar when the

appliance is not in use. This preserves the door

seal and prevents the formation of musty smells.

• Always check that water has emptied out before

opening the door. If not, drain the water following

the instructions in the instruction book.

• Always unplug the appliance and shut the water

tap after use.

General safety

• Repairs to the machine must be carried out only by

qualified personnel. Repairs carried out by

inexperienced persons could cause serious

danger. Contact your local Service Centre.

• Never pull the power supply cable to remove the

plug from the socket; always take hold of the plug

itself.

• During high temperature wash programmes the

door glass may get hot. Do not touch it!

The following warnings are provided in the interests of overall safety. You must read them carefully before

installing or using the appliance.

132997230•gb 19-04-2001 15:24 Pagina 4

ENGLISH

5

Disposal

Tips for environmental protection

Packaging materials

The materials marked with the symbol are

recyclable.

>PE<=polyethylene

>PS<=polystyrene

>PP<=polypropylene

This means that they can be recycled by disposing of

them properly in appropriate collection containers.

Machine

Use authorised disposal sites for your old appliance.

Help to keep your country tidy!

To save water, energy and to help protect the

environment, we recommend that you follow these

tips:

• Normally soiled laundry may be washed without

prewashing in order to save detergent, water and

time (the environment is protected too!).

• The machine works more economically if it is fully

loaded.

• With adequate pre-treatment, stains and limited

soiling can be removed; the laundry can then be

washed at a lower temperature, so saving energy.

• Measure out detergent according to the water

hardness, the degree of soiling and the quantity of

laundry being washed.

Child safety

• Children are often not aware of how dangerous

electrical appliances can be. When the machine is

working, children should be carefully supervised

and not be allowed to play with the appliance.

• The packaging components (e.g. plastic film,

polystyrene) can be dangerous to children - danger

of suffocation! Keep them out of children’s reach.

• Keep all detergents in a safe place out of children’s

reach.

• Make sure that children or pets do not climb into

the drum.

• When the appliance is to be scrapped, cut off the

electrical supply cable and destroy the plug with

the remaining cable. Disable the door catch in

order to prevent children from becoming trapped

inside while playing.

132997230•gb 19-04-2001 15:24 Pagina 5

Technical specifications

6

DIMENSIONS Height 85 cm

Width 60 cm

Depth 58 cm

MAXIMUM LOAD Cotton 5.5 kg

Synthetics 2.5 kg

Delicates 2.5 kg

Woollens 2 kg

SPIN SPEED 1000 rpm max. (EW 1067F)

1200 rpm max. (EW 1267F)

POWER SUPPLY VOLTAGE/FREQUENCY 220-230 V/50 Hz

TOTAL POWER ABSORBED 2200 W

MINIMUM FUSE PROTECTION 10 A

WATER PRESSURE Minimum 50 kPa

Maximum 800 kPa

This appliance complies with the following EEC Directives:

73/23/EEC of 19/02/73 relating to low voltage

89/336/EEC of 03/05/89 relating to electromagnetic compatibility.

132997230•gb 19-04-2001 15:24 Pagina 6

ENGLISH

Installation

7

Unpacking

All transit bolts and packing must be removed

before using the appliance.

You are advised to keep all transit devices so that

they can be refitted if the machine ever has to be

transported again.

1. Using a spanner, unscrew and remove the rear

right-hand bolt and lay the machine on its back,

taking care not to squash the hoses. This can be

avoided by placing one of the corner packing

pieces between the machine and the floor.

2. Remove the polystyrene block from the bottom of

the machine and release the two plastic bags.

3. Carefully remove the right-hand bag (1) then the

left-hand bag (2) by pulling them towards the

centre of the machine.

4. Set the machine upright and remove the two

remaining bolts from the back.

5. Pull out the three plastic spacers from the holes

into which the bolts were fitted.

6. Plug all the holes with the plugs which you will

find at the back of the appliance or in the

envelope containing the user manual.

P0020

P0256

2

1

P1066

P1068

P0255

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is

not impeded by carpets, rugs etc. Check that the

machine does not touch the wall or other kitchen

units.

Carefully level by screwing the adjustable feet in or

out. Never place cardboard, wood or similar

materials under the machine to compensate for any

unevenness in the floor.

Water inlet

Connect the water inlet hose to a tap with a 3/4"

thread.

The other end of the inlet hose which connects to the

machine can be turned in any direction. Simply

loosen the fitting, rotate the hose and retighten the

fitting, making sure there are no water leaks.

The inlet hose must not be lengthened. If it is too

short and you do not wish to move the tap, you will

have to purchase a new, longer hose specially

designed for this type of use.

P0021

P1088

P1051

132997230•gb 19-04-2001 15:24 Pagina 7

8

Water drainage

The end of the drain hose can be positioned in three

ways:

Hooked over the edge of a sink using the plastic

hose guide supplied with the machine. In this

case, make sure the end cannot come unhooked

when the machine is emptying.

This could be done by tying it to the tap with a piece

of string or attaching it to the wall.

In a sink drain pipe branch. This branch must be

above the trap so that the bend is at least 60 cm

above the ground.

Directly into a drain pipe at a height of not less

than 60 cm and not more than 90 cm.

The end of the drain hose must always be

ventilated, i.e. the inside diameter of the drain pipe

must be larger than the outside diameter of the drain

hose.

The drain hose must not be kinked. Run it along the

floor; only the part near the drainage point must be

raised.

P0023

P0022

Electrical connection

This machine is designed to operate on a 220-230 V,

single-phase, 50 Hz supply.

Check that your domestic electrical installation can

take the maximum load required (2.2 kW), also

taking into account any other appliances in use.

Connect the machine to an earthed socket.

The manufacturer declines any responsibility

for damage or injury through failure to comply

with the above safety precaution.

Should the appliance power supply cable

need to be replaced, this should be carried

out by our Service Centre.

Please ensure that when the appliance is installed

the power supply cable is easily accessible.

132997230•gb 19-04-2001 15:24 Pagina 8

ENGLISH

Your new washing machine

9

This new washing machine, which is fitted with the Direct Spray system, patented Electrolux, meets all modern

needs for effective treatment of laundry with low water, energy and detergent consumption.

Further savings are achieved by washing small loads of laundry, since water and electricity consumption is

proportional to the quantity and type of laundry being washed.

• The programme selector dial combines the function of programme and temperature selection, making it

easier to set the programme.

• The programme progress display shows the programme steps selected and the programme phase which

is running.

• The special wool programme with its new delicate wash system treats your woollens with extreme care.

• The balance control device ensures the machine is stable during the spin.

1 Detergent dispenser drawer

2 Programme chart

3 Control panel

4 Door locked pilot light

5 Drain filter

6 Adjustable feet

Door locked pilot light

It stays on during the whole programme indicating

that the door is locked.

When the light goes out, the door can be opened

(see page 14).

Detergent dispenser drawer

Prewash

Main wash

Fabric softener, starch

Description of the appliance

1

3

4

6

5

1200

900

700

500

EW 1267 F

2

P0874

132997230•gb 19-04-2001 15:24 Pagina 9

10

Use

1200

900

700

500

EW 1267 F

12 3 4 5 6 7 8 9 1011 13 14

12

Control panel

1 Programme chart

A programme chart in English is supplied with the

user manual.

2 Mains-on light

This light comes on when the ON/OFF button is

pressed, and goes out when it is pressed again.

3 ON/OFF button

Press this button to switch the machine on. Press it

again to switch the machine off.

4 Programme selector dial

The selector is divided into 5 sections:

• Cotton, linen (light blue section)

• Synthetics (yellow section)

• Delicates (black section)

• Woollens (hand washing) (black section)

• Special programmes A....G

• Reset programme O

The selector dial can be turned either clockwise or

anticlockwise.

95°

60°

40°

30°

40°

A

B

C

D

F

G

60

°

E

40

°

E

30°

60°

40°

30°

E

30°

40°

Position E corresponds to the ENERGY SAVING

programme and position to “cold wash”.

At the end of the programme the selector dial

must be turned to position O.

Programme Option buttons

Depending on the programme, different functions

can be combined. These must be selected after

choosing the desired programme and before

depressing the START/PAUSE button.

When these buttons are pressed, the corresponding

pilot lights come on. When they are pressed again,

the pilot lights go out.

If an incorrect option is selected, the pilot lights flash

for about 2 seconds and the message Err is

displayed.

5 Prewash button

The machine performs a prewash cycle at 30°C max.

The prewash cycle ends with a short spin at 650 r.p.m.

in programmes for Cotton and Synthetics, and with

emptying of the water for Delicates.

This option is not available with the wool programme.

For use when washing heavily soiled laundry.

6 Spin speed button

Press this button to reduce the maximum speed of the

final spin proposed by the machine for the selected

programme or to select position (no spin).

The light corresponding to the selected option

illuminates.

The following speeds are available for the different

fabrics.

EW 1267 F

• Cotton, linen:

500/700/900 max 1200 r.p.m.

Spin speed

132997230•gb 19-04-2001 15:24 Pagina 10

ENGLISH

• Synthetics, wool:

500/700 max 900 r.p.m.

• Delicates:

500 max 700 r.p.m.

EW 1067 F

• Cotton, linen:

450/650/850 max 1000 r.p.m.

• Synthetics, wool:

450/650 max 850 r.p.m.

• Delicates:

450 max 650 r.p.m.

By selecting this option the spinning phases are

suppressed.

This function is not available for cotton and linen.

To be selected for extremely delicate items.

7 Anti-crease button

When this button is pressed, the last rinse water is

not emptied out, to prevent the fabrics from creasing.

When the programme has finished, the pilot light of

the START/PAUSE button flashes and the phase

light is alight to indicate that the water must be

emptied out.

To empty out water there are 3 possibilities:

• Select programme “D” (draining):

The water is emptied out without spinning.

Attention! Before selecting programme “D” the

selector dial has to be positioned on O (cancelling).

• Depress START/PAUSE button : after

emptying, the machine performs the spin cycle

corresponding to the type of fabric previously

selected.

• Select the spin speed by means of the relevant

button and then depress the START/PAUSE

button.

8 Quick wash button

By pressing this button the washing time is reduced

as follows:

• 52 minutes for cotton 95°C

• 63 minutes for cotton 60°C

• 72 minutes for cotton 40°C and 30°C

• 24 minutes for synthetics

• 8 minutes for delicates

This option is not available with the wool programme

and the Energy saving programme.

To be used for lightly soiled laundry.

9 Extra rinse button

Can be used with all programmes except the wool

programme. The machine performs 4 rinses instead

of 3.

This option is recommended for people who are

allergic to detergents and in areas where the water is

very soft.

10 “Bio” button

This function can be selected for cotton and

synthetics with a washing temperature of 40 or more

degrees.

The machine will maintain a temperature of 40° for

about 10 minutes to enable the enzymes contained

in the detergent to eliminate the dirt.

To be used for laundry with “stubborn” stains.

11 DELAY START button

The wash programme can be delayed from 1 hour

up to a maximum of 24 hours by means of this

button.

• Switch the machine on by depressing the ON/OFF

button .

• Select the programme and the required options.

• Select the delay start.

• Depress START/PAUSE button : the machine

starts its hourly countdown.

The programme will start after the selected delay has

expired.

• Depress START/PAUSE button .

• Depress DELAY START button until the required

time is displayed.

If you wish to cancel the delay, depress the button

only once: the symbol 0 h is displayed.

• Depress START/PAUSE button again.

Altering the delayed start

Selecting the delayed start

11

No spin

132997230•gb 19-04-2001 15:24 Pagina 11

12 DISPLAY

The display shows the following information:

Cancelling - Duration of the programme -

Delayed start - Incorrect option selection - Alarm

code - End of programme.

If a programme has been cancelled - programme

selector dial on position O - three flashing dashes

appear on the display.

Now you can select a new programme.

After selecting a programme, the duration is

displayed in hours and minutes ( for example 2.05).

The duration is calculated automatically on the basis of

the maximum recommended load for each type of fabric.

After the programme has started, the time remaining

is updated every minute.

The selected delay (24 hours max) set by means of

the relevant button appears on the display for 3

seconds, then the duration of the previously selected

programme is displayed.

Delayed start

2.05

Duration of the selected

programme

---

Cancelling

The countdown is updated every hour.

If an option which is not compatible with the set wash

programme is selected, the message Err is

displayed for 2 seconds.

In the event of operating problems, some alarm

codes can be displayed, for example E20 (see

paragraph “Something not working”).

E20

Alarm codes

Incorrect option selection

12

132997230•gb 19-04-2001 15:24 Pagina 12

ENGLISH

When the programme has finished a flashing zero

is displayed.

If you have selected the Anti-crease option , the

zero will not flash.

13 START/PAUSE button

This button has three functions:

Start - Pause - Draining of water.

After having selected the required programme, press

this button to start the machine; the corresponding

pilot light stops flashing.

If you have selected the delayed start, the machine

begins its countdown. The duration of the

programme or the delay appears on the display.

To interrupt a programme which is running, depress

the Start/Pause button: the corresponding pilot light

starts to flash.

To restart the programme from the point at which it

was interrupted, press the START/PAUSE button

again.

By depressing the Start/Pause button

• The water of programme “A” (Soak) is emptied out

Draining of water

Pause

Start

End of programme

• The water of the last rinse on programmes with

Anti-crease option is emptied out and the

laundry is spun.

14 Programme progress display

By selecting the wash programme, the pilot lights

corresponding to the various phases making up the

programme come on.

After the machine has started, only the running

phase pilot light stays on. When the programme has

finished, the End pilot light comes on.

The END pilot light flashes in the event of

operating problems.

At the same time one of the following lights starts to

flash and an alarm code appears on the display.

E10 + = the machine does not fill

E20 + = the machine does not empty

E40 + = the door has not been closed

To eliminate the problem, see paragraph “Something

not working”.

If at the end of the programme the pilot light

flashes this means that the drain filter must be

cleaned.

Functions

End of programme

When the door locked light has gone out, the door

can be opened. The light (END) on the

programme progress display illuminates.

A flashing zero appears on the display.

Switch the machine off and remove the laundry.

Turn the programme selector dial to O.

Altering a programme

You can alter the programme before it starts.

When the programme has started, you can only

reset it by turning the programme selector dial to O

and then you can select the new programme.

Start it by depressing the START/PAUSE button.

Prewash

Main wash

Rinses

Stop with water in the tub

Drain

Spin

Clogged filter

End

13

132997230•gb 19-04-2001 15:24 Pagina 13

Interrupting a programme

Depress the START/PAUSE button to interrupt a

programme which is running, the corresponding light

starts to flash. Depress the same button again to

restart the programme.

Cancelling a programme

Turn the selector dial to O to cancel a programme

which is running: three flashing dashes appear on

the display. Now you can select a new programme.

Opening the door after the programme

has started

First set the machine to PAUSE by pressing the

START/PAUSE button.

The door can be opened when the door locked light

has gone out.

If the door does not open, this means that the machine

is already heating, that the water level is above the

bottom edge of the door or that the drum is turning.

If you cannot open the door but you need to open it

you have to switch the machine off by depressing the

ON/OFF button . After about 3 minutes the door

can be opened (pay attention to the water level and

temperature!). To restart the programme depress

ON/OFF button again after closing the door.

Programme information

Washing programme for machine washable wool as

well as for hand washable woollens and delicate

fabrics with the “hand washing” care symbol.

Select this programme for heavily soiled laundry.

Pour the detergent into the compartment .

This programme is not suitable for wool.

The machine performs a soak at 30°C and stops

with the water in the drum. The water can be

emptied out in 2 ways:

• Draining only by depressing the START/PAUSE

button.

• Draining and spin: turn the programme selector

dial to O, select programme “F” (spin), reduce

eventually the spin speed by means of button

and depress START/PAUSE button.

Important!

• If the water is not emptied out within 18 hours, the

machine empties automatically.

A = Soak

Wool

• At the end of the soak (after having emptied out

the water) you can select the washing programme.

Turn first the programme selector dial to O, then

select the programme and depress the

START/PAUSE button.

With this programme it is possible to rinse and spin

garments which have been washed by hand.

The machine performs 3 rinses, followed by a final

spin at the max. speed.

The spin speed can be reduced by depressing

button .

Hand washed garments can be softened with this

programme.

The machine performs 1 rinse, followed by a final

spin at the max. speed, which can be reduced by

depressing button .

For emptying out the water of the last rinse in

programmes with the Anti-crease option.

Turn first the programme selector dial to O, then

select programme “D” and depress the

START/PAUSE button.

Separate spin at the maximum speed for hand washed

garments. You can reduce the speed by means of

button to adapt it to the fabrics to be spun.

This is a complete programme that can be

combined with the following options: spin speed

reduction, no spin, anti-crease and delayed start.

To be used for laundry which is lightly soiled or

which needs freshening up.

Max load 2.5 kg.

Washing temperature 30°C

Programme duration 30 minutes

Final spin speed 700 or 650 r.p.m.

To reset a programme turn the selector dial to O.

Now can a new programme be selected.

O = Cancelling

G = Short programme

F = Spin

D = Drain

C = Softeners

B = Rinses

14

132997230•gb 19-04-2001 15:24 Pagina 14

ENGLISH

15

Washing hints

Sorting the laundry

Follow the wash code symbols on each garment

label and the manufacturer’s washing instructions.

Sort the laundry as follows:

whites, coloureds, synthetics, delicates, woollens.

Temperatures

95° for normally soiled white cottons and linen

(e.g. tea cloths, towels, tablecloths,

sheets...)

60° for normally soiled, colour fast garments

(e.g. shirts, night dresses, pyjamas....) in

linen, cotton or synthetic fibres and for

lightly soiled white cotton (e.g. underwear).

(cold)for delicate items (e.g. net curtains), mixed

30°-40° laundry including synthetic fibres and

woollens.

Before loading the laundry

Never wash whites and coloureds together. Whites

may lose their “whiteness” in the wash.

New coloured items may run in the first wash; they

should therefore be washed separately the first time.

Make sure that no metal objects are left in the

laundry (e.g. hair clips, safety pins, pins).

Button up pillowcases, close zip fasteners, hooks

and poppers. Tie any belts or long tapes.

Remove persistent stains before washing. Rub

particularly soiled areas with a special detergent or

detergent paste.

Treat curtains with special care. Remove hooks or tie

them up in a bag or net.

Maximum loads

Recommended loads are indicated in the

programme charts.

General rules:

Cotton, linen: drum full but not too tightly packed;

Synthetics: drum no more than half full;

Delicate fabrics and woollens: drum no more than

one third full.

Washing a maximum load makes the most efficient

use of water and energy.

For heavily soiled laundry, reduce the load size.

Laundry weights

The following weights are indicative:

bathrobe 1200 g

napkin 100 g

quilt cover 700 g

sheet 500 g

pillow case 200 g

tablecloth 250 g

towelling towel 200 g

tea cloth 100 g

night dress 200 g

ladies’ briefs 100 g

man’s work shirt 600 g

man’s shirt 200 g

man’s pyjamas 500 g

blouse 100 g

men’s underpants 100 g

Removing stains

Stubborn stains may not be removed by just water

and detergent. It is therefore advisable to treat them

prior to washing.

Blood: treat fresh stains with cold water. For dried

stains, soak overnight in water with a special

detergent then rub in the soap and water.

Oil based paint: moisten with benzine stain

remover, lay the garment on a soft cloth and dab the

stain; treat several times.

Dried grease stains: moisten with turpentine, lay

the garment on a soft surface and dab the stain with

the fingertips and a cotton cloth.

Rust: oxalic acid dissolved in hot water or a rust

removing product used cold. Be careful with rust

stains which are not recent since the cellulose

structure will already have been damaged and the

fabric tends to hole.

Mould stains: treat with bleach, rinse well (whites

and fast coloureds only).

Grass: soap lightly and treat with bleach (whites and

fast coloureds only).

Ball point pen and glue: moisten with acetone (*),

lay the garment on a soft cloth and dab the stain.

Lipstick: moisten with acetone as above, then treat

stains with methylated spirits. Remove any residual

marks from white fabrics with bleach.

Red wine: soak in water and detergent, rinse and

treat with acetic or citric acid, then rinse. Treat any

residual marks with bleach.

132997230•gb 19-04-2001 15:24 Pagina 15

Quantity of detergent to be used

The type and quantity of detergent will depend on

the type of fabric, load size, degree of soiling and

hardness of the water used.

Water hardness is classified in so-called “degrees” of

hardness. Information on hardness of the water in

your area can be obtained from the relevant water

supply company, or from your local authority.

Follow the product manufacturers’ instructions on

quantities to use.

Use less detergent if:

– you are washing a small load,

– the laundry is lightly soiled,

– large amounts of foam form during washing.

Degrees of water hardness

Ink: depending on the type of ink, moisten the fabric

first with acetone (*), then with acetic acid; treat any

residual marks on white fabrics with bleach and then

rinse thoroughly.

Tar stains: first treat with stain remover, methylated

spirits or benzine, then rub with detergent paste.

(*) do not use acetone on artificial silk.

Detergents and additives

Good washing results also depend on the choice of

detergent and use of the correct quantities to avoid

waste and protect the environment. Although

biodegradable, detergents contain substances

which, in large quantities, can upset the delicate

balance of nature.

The choice of detergent will depend on the type of

fabric (delicates, woollens, cottons, etc.), the colour,

washing temperature and degree of soiling.

All commonly available washing machine detergents

may be used in this appliance:

– powder detergents for all types of fabric,

– powder detergents for delicate fabrics (60°C max)

and woollens,

– liquid detergents, preferably for low temperature

wash programmes (60°C max) for all types of

fabric, or special for woollens only.

The detergent and any additives must be placed in

the appropriate compartments of the dispenser

drawer before starting the wash programme.

If using concentrated powder or liquid detergents, a

programme without prewash must be selected.

The washing machine incorporates a recirculation

system which allows an optimal use of the

concentrated detergent.

Pour liquid detergent into the dispenser drawer

compartment marked just before starting the

programme.

Any fabric softener or starching additives must be

poured into the compartment marked before

starting the wash programme.

Follow the product manufacturer’s recommendations

on quantities to use and do not exceed the «MAX»

mark in the detergent dispenser drawer.

16

Level Characteristic

Degrees

German

°dH

French

°T.H.

soft

medium

hard

very hard

0- 7

8-14

15-21

more than

21

0-15

16-25

26-37

more than

37

1

2

3

4

132997230•gb 19-04-2001 15:24 Pagina 16

ENGLISH

17

International wash code symbols

These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.

Energetic wash

Delicate wash

Max. wash

temperature

95°C

Max. wash

temperature

60°C

Max. wash

temperature

40°C

Max. wash

temperature

30°C

Hand wash Do not

wash

at all

Bleaching Bleach in cold water Do not bleach

Ironing Hot iron

max 200°C

Warm iron

max 150°C

Lukewarm iron

max 110°C

Do not iron

Dry cleaning Dry cleaning

in all solvents

Dry cleaning in

perchlorethylene,

petrol, pure alcohol,

R 111 & R 113

Dry cleaning

in petrol,

pure alcohol

and R 113

Do not

dry clean

Drying Flat On the line On clothes

hanger

Tumble dry

high

temperature

low

temperature

Do not

tumb

le dr

y

A

P

F

95

60

40

30

132997230•gb 19-04-2001 15:24 Pagina 17

18

4. Switch the machine on

To switch the machine on, press the ON/OFF button

: the mains-on light comes on.

If the programme selector dial is on the RESET O

position, three flashing dashes will be displayed. If

the programme selector dial is positioned on a wash

programme, a flashing zero will be displayed.

5. Select the desired programme

Turn the programme selector dial to the desired

position: the lights corresponding to the different

phases making up the selected programme light on.

The duration of the programme appears on the

display.

6. Select the spin speed or option

Depress the spin speed button to choose the

required speed or option : the corresponding light

comes on.

1200

900

700

500

Prewash

Main wash

Rinses

Stop with water in the tub

Drain

Spin

Clogged filter

End

95°

60°

40°

30°

40°

A

B

C

D

F

G

6

0

°

E

40

°

E

30°

60°

40°

30°

E

30°

40°

---

0

Operating sequence

Before washing your first load of laundry, we

recommend that you run a cotton cycle at 60°C, with

the machine empty, in order to remove any

manufacturing residue from the drum and tub.

Pour half a measure of detergent into the main wash

compartment and start up the machine.

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible.

Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure

out the amount of detergent recommended by the

manufacturer in a graduated cup and pour it into the

main wash compartment .

If you wish to carry out the prewash, pour detergent

into the appropriate compartment marked .

3. Measure out the additives

If required, pour fabric softener into the compartment

marked , without exceeding the «MAX» mark.

P0877

P0876

P0004

132997230•gb 19-04-2001 15:24 Pagina 18

ENGLISH

The pilot light corresponding to the wash phase

which is running is on.

The door light comes on to indicate that the door is

locked.

The machine starts operating.

If you have selected the delayed start the machine

starts its countdown. The display shows the delay or

the duration of the programme.

10. At the end of the programme

The machine stops automatically.

If the anti-crease option has been selected, the

light of the START/PAUSE button flashes

and the light of the programme progress display

is on to indicate that the water must be emptied out

before opening the door. The display shows a zero.

At the end of the programme (after draining) a

flashing zero appears on the display.

The door can only be opened after the door locked

light has gone out.

Release of the lock is also indicated by the coming

on of the light

.

Turn the programme selector dial to Reset O.

Switch the machine off by pressing the ON/OFF

button .

Remove the laundry from the drum and carefully

check that the drum is empty so as to avoid any

forgotten items being damaged in a subsequent

wash (e.g. shrinking) or their colour running into a

load of whites.

If you do not intend to carry out another wash, close

the water tap.

Leave the door open to prevent the formation of

mildew and unpleasant smells.

19

7. Select the required options

The light corresponding to the depressed button

illuminates.

8. Select the DELAY START option

To delay starting of a programme, press the DELAY

START button. The figures corresponding to the

selected delay will be displayed for about 3 seconds,

after which the duration of the selected programme

will appear on the display.

During this period it is possible to load other laundry:

• depress START/PAUSE button;

• load the laundry;

• close the door and depress START/PAUSE button

again.

9. Start the programme

To start the selected programme, press the

START/PAUSE button; the corresponding light stops

flashing.

132997230•gb 19-04-2001 15:24 Pagina 19

20

Programme chart

Washing programmes

* The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on

the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. It refers to the

highest temperature for each wash programme and to a wash load of 5 kg for cotton.

** In compliance with EC directive 92/75, the consumption figures indicated on the energy label refer to the

60°C wash programme for cotton with a wash load of 5 kg.

Section

BIO

light blue

yellow

black

95°

E

60°

60° **

E

40°

-30°-

40°

-30°-

40°-60°

E

40°

30°-40°

-30°-

40°

Temp.

Type of

fabric

Additional

functions

5.5 kg

2.5 kg

2 kg

Max.

load

Consumption*

Energy

kWh

Water

lt.

Time

min.

White

cotton

White

cotton

economy

Fast

coloureds

Coloureds

economy

Non-fast

coloureds

Synthetics

economy

Delicates

Wool

Programme

description

Wash at 95°C

3 rinses

Normal spin

Wash at 67°C

3 rinses

Normal spin

Wash at 60°C

3 rinses

Normal spin

Wash at 45°C

3 rinses

Normal spin

Wash at 30°-40°C

or cold wash

3 rinses

Normal spin

Wash at 30°-40°-

60°C or

cold wash

3 rinses

Delicate spin

Wash at 45°C

3 rinses

Delicate spin

Wash at 30°-40°C

3 rinses

Delicate spin

Wash at 30°-40°C

or cold wash

3 rinses

Delicate spin

1.9

1.3

0.95

0.7

0.85

0.8

0.65

0.5

0.35

47

44

60

53

42

148

138

130

136

115

87

93

64

55

132997230•gb 19-04-2001 15:24 Pagina 20

Pagina se încarcă ...

Electrolux EW1267F Manual de utilizare

Electrolux EW1267F Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente