Samsung DA-E650 Manual de utilizare

Wireless Audio with Dock

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more a complete service,

please register your product at

www.samsung.com/register

DA-E650

DA-E651

2

features

Dual Docking Audio Speaker System

Using the system's dual docking station, dock, charge, and then play either Samsung Galaxy devices or Apple

devices through the system's built-in speakers.

USB Host support

Connect and play music files from external USB storage devices such as MP3 players, USB flash memory, etc.

using the Wireless Audio with Dock's USB HOST function.

Bluetooth Function

Connect a Bluetooth device to the Wireless Audio with Dock and enjoy music from the device with high quality

stereo sound, all without wires!

aptX

®

aptX enables high quality Bluetooth stereo audio, delivering wired audio quality wirelessly.

LICENSE

iPad, iPhone, iPod, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple Inc., registered in the U.S. and

other countries.

3

EnG

safety information

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates “dangerous voltage”

inside the product that presents a risk of

electric shock or personal injury.

This symbol indicates important instructions

accompanying the product.

WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

• This apparatus shall always be connected to a AC outlet with a protective grounding connection.

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains

plug shall be readily operable.

CAUTION

• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the

apparatus.

• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power

plug must be easily and readily accessible at all times.

4

PRECAUTIONS

Ensure that the DC power supply in your house complies with the power requirements listed on the identification sticker located on the

back of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (70~100

mm). Make sure the ventilation slots are not covered. Do not place the

unit

on amplifiers or other equipment which may become hot. This

unit

is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to

leave it unused for a long period of time.

During thunderstorms, disconnect the AC plug from the

wall outlet. Voltage peaks due to lightning could damage the unit.

Protect the

product

from moisture (i.e. vases) , and excess heat

(e.g.fireplaces) or equipment creating strong magnetic or electric fields

Disconnect the power cable from the AC supply if the unit malfunctions.

Your

product

is not intended for industrial use. This product is for

personal use only.

Condensation may occur if your

product

has been stored in cold temper-

atures. If transporting the

unit

during the winter, wait approxi

mately 2 hours

until the unit has reached room temperature before using.

Do not expose the unit to direct sunlight or other heat sources.

This could cause the unit to overheat and malfunction.

The batteries used with this product contain chemicals that are harmful to

the environment.

Do not dispose of batteries in the general household trash.

The batteries used with this product contain chemicals that are harmful to

Phones

3.9 inch 3.9 inch

2.7 inch

3.9 inch

99.1mm

68.6mm

99.1mm

5

EnG

contents

FEATURES

2

2 Features

2 License

SAFETY INFORMATION

3

3 Safety warnings

4 Precautions

GETTING STARTED

6

6 Before reading the user’s manual

6 What’s included

DESCRIPTIONS

7

7 Front/Rear Panel

REMOTE CONTROL

9

9 Tour of the remote control

POWER ON AND VOLUME

CONTROL

10

10 Turning the Power on/off

10 Adjusting the volume

CONNECTIONS

11

11 Installing the Toroidal Ferrite on the Power

Cable

12 Using Rubber

13 Connecting a device to the Dual Dock

14 Connecting an audio device using AUX IN

16 Connecting to Bluetooth devices

PLAYING

18

18 Using the TV mode (Sound Share)

18 Using the docking mode with Samsung

Galaxy and Apple Devices

20 Using the Bluetooth mode

21 Using the USB mode

FUNCTIONS

22

22 Basic functions

23 Advanced functions

24 Software upgrade (only USB mode)

TROUBLESHOOTING

25

25 Troubleshooting

APPENDIX

26

26 Specifications

6

BEFORE READING THE USER’S MANUAL

Note the following terms before reading the user manual.

Icons used in this manual

Icon Term Definition

Caution

Indicates a situation where a function does not operate or settings may be

canceled.

Note

Indicates tips or instructions on the page that help a function operate.

Safety Instructions and Troubleshooting

1) Familiarise yourself with the Safety Instructions before using this product. (See page 3)

2) If a problem occurs, check Troubleshooting. (See page 25)

Copyright

written permission of Samsung Electronics Co.,Ltd.

getting started

▪ The appearance of the accessories may differ slightly from the illustrations above.

WHAT’S INCLUDED

Check for the supplied accessories shown below.

MUTE

VOL

BASS

FUNCTION

Remote Control / Lithium Battery (3V) DC Adapter Power Cable

Audio Cable

(Rubber-Support: 2EA)

(Rubber-Skin)

(Large)

(For Power Cable 1EA)

Rubber-Support / Rubber-Skin Ferrite Core Cloth User Manual

7

EnG

● DEscriptions

descriptions

FRONT/REAR PANEL

ONLY FOR

SERVICE

AUX IN

DC 14V 4A

USB

5V 500mA

ONLY FOR

SERVICE

AUX IN

DC 14V 4A

USB

5V 500mA

ONLY FOR

SERVICE

AUX IN

DC 14V 4A

USB

5V 500mA

ONLY FOR

SERVICE

AUX IN

DC 14V 4A

USB

5V 500mA

4

1 2 3

8

7

65

<FRONT>

<REAR>

8

FUNCTION

Switches the mode as follows : ; ; ; ; AUX (LED Off)

VOLUME -/+

Controls the volume level.

PLAY/PAUSE

Play or pause a music file.

DUAL DOCK

Provides a 5 pin dock for Samsung Galaxy devices and a 30 pin dock

for Apple devices.

When you change the mode with the Function button, the selected

mode will be displayed in red on the Function Display.

The LED stops blinking when the power of the unit turns on.

5

DC 14V

Connect the unit's DC adapter to this jack.

6

USB PORT

Connect an external USB storage device such as an MP3 player here

to play files located on the device.

7

AUX IN

Connect to the Analog output of an external device.

8

ONLY FOR

SERVICE

This jack is for service only.

▪ When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.

▪ To upgrade the product's software through the USB Host jack, you must use a USB memory

stick.

▪ This unit can connect to mobile devices with high audio output levels. When you connect this

unit to external devices with high output levels, it may lower the audio output to protect the amp

and speakers.

▪ When disconnecting the power cable from the wall outlet, hold the plug.

Do not pull the cable.

9

EnG

● rEmotE control

remote control

TOUR OF THE REMOTE CONTROL

Operation Range of the Remote Control

You can use the remote control up to 23 feet (7 meters) in a straight line from the unit. You can also operate the

remote at a horizontal angle of up to 30° from the remote control sensor.

MUTE

VOL

BASS

FUNCTION

POWER BUTTON

Turns the unit on and off.

CONTROL BUTTON

Search for the next or previous

music file.

VOLUME

Adjusts the volume level of the unit.

PLAY/PAUSE BUTTON

Play or pause a music file.

FUNCTION BUTTON

Selects the Function mode.

MUTE BUTTON

Mutes the sound from this unit.

Press again to restore the sound

to the previous volume level.

BASS BUTTON

Optimise the sound based on

your tastes.

▪ Be careful not to catch your fingernail in the gap when you lift the cover. You can damage

your fingernail.

Installing battery in the Remote Control

1.

Open the cover of the remote

control by putting your fingernail

into the gap between the cover

and body of the remote control.

Then, lift the cover and separate

it completely.

2.

Install a 3V Lithium battery.

Insert the battery into the battery

compartment with the + side facing

up.

3.

Fit the remote control's cover to the

remote control. Next, lower the cover so

that it is flush with the body of the remote,

and then press the cover into the body by

pushing the edges down with your hand.

10

power on and volume control

TURNING THE POWER ON/OFF

MUTE

VOL

BASS

FUNCTION

MUTE

VOL

BASS

FUNCTION

ONLY FOR

SERVICE

AUX IN

DC 14V 4A

USB

5V 500mA

ONLY FOR

SERVICE

AUX IN

DC 14V 4A

USB

5V 500mA

or

1. To turn on this unit, touch any button on the unit's front panel when the unit is in Standby mode.

or,

Press POWER on the remote control.

2. To turn off this unit, touch the +# button on the unit's front panel for more than 3 seconds.

or,

Press POWER on the remote control again.

ADJUSTING THE VOLUME

Use +,- buttons to adjust the volume. The function LEDs light from left to right when your turn the volume up and

from right to left when you turn the volume down. The LEDs do not light if you try to increase the volume when it has

already been set to maximum or try to decrease the volume when it has already been set to minimum.

ONLY FOR

SERVICE

AUX IN

DC 14V 4A

USB

5V 500mA

ONLY FOR

SERVICE

AUX IN

DC 14V 4A

USB

5V 500mA

MUTE

VOL

BASS

FUNCTION

MUTE

VOL

BASS

FUNCTION

or

Touch the +/– button on the right side of the front panel.

or,

Press VOL +/– on the remote control.

▪ The volume level increases or decreases when you press VOL +/–.

▪ You can also use the volume controls of devices connected using the Dual Dock or Bluetooth to control

the volume. However, your ability to control the volume using the volume controls of devices connected

using Bluetooth may be limited.

11

EnG

● connEctions

connections

INSTALLING THE TOROIDAL FERRITE ON THE POWER CABLE

Wind Power cable around the core three times.

(Start winding at 5-10cm away from the plugs)

Close the lock back.

Lift up to release the lock and open the core.

12

Rubber-Support

Rubber-Skin

USING RUBBER

Attach the Rubber to avoid direct contact with this set when you hold Samsung Galaxy Device and Apple Device.

RUBBER-SUPPORT

1. Attach the Rubber to the proper place considering the size of the device which you want to use.

2. After attach the Rubber-Support, set your device to the Dual dock.

RUBBER-SKIN

1. Cover the Rubber-Skin on the Dual dock.

2. After cover the Rubber-Skin on the Dual dock, set your device to the Dual dock.

▪ Use the product after removing the Rubber-Skin attached to the product if you have the protection case

for your device.

▪ You can use this product only when the thickness of the protection case is under 1.5mm when you attach

the Spacer cover to your device. It is impossible to use this product when the thickness of the protection

case is over 1.5mm or has special shape with round.

13

EnG

● connEctions

CONNECTING A DEVICE TO THE DUAL DOCK

How to connect a device to the Dual Dock.

1. The DUAL DOCK is located on the front of the product. To open, push it in gently.

2. Touch the

button on the front panel of the Wireless Audio with Dock repeatedly until the icon appears in

the display.

• Each time you press the button, the selection changes as follows :

; ; ; ; AUX (LED Off)

• The selected mode is displayed in red in the Function Display.

3. If you have a Samsung Galaxy device, connect the device to the 5 pin (smaller) connector to connect to the Dual

Dock. If you have an Apple device, connect the device to the 30 pin (larger) connector on the Dual Dock.

▪ Turn on your Samsung Galaxy device before you attach it to the Dual Dock.

▪ This unit doesn't support the simultaneous docking of Samsung Galaxy and Apple devices.

▪ Connect your Samsung Galaxy or Apple device to the Dual Dock before starting Docking mode.

(See page 18)

14

CONNECTING AN AUDIO DEVICE USING AUX IN

This section explains how to connect the unit to an audio device.

This unit is equipped with one audio analog jack for connecting an audio device.

AUX IN

1. Connect AUX IN (Audio) on the back of the unit to the earphone jack of the external device or audio device.

2. Touch the

button repeatedly until the function LEDs are off.

• The AUX mode is active when no function LED is lit.

▪ Before moving or installing this product, be sure to turn off the power and disconnect the power cord.

ONLY FOR

SERVICE

AUX IN

DC 14V 4A

USB

5V 500mA

ONLY FOR

SERVICE

AUX IN

DC 14V 4A

USB

5V 500mA

ONLY FOR

SERVICE

AUX IN

DC 14V 4A

USB

5V 500mA

AUX IN

Earphones

jack

Audio Cable

External device

15

EnG

● connEctions

BLUETOOTH

You can connect the Wireless Audio with Dock to Bluetooth devices and enjoy music with high quality stereo

sound, all without wires!

What is Bluetooth?

Bluetooth technology lets Bluetooth-compliant devices interconnect easily with each other using a short

wireless connection.

• A Bluetooth device may cause noise or malfunction, depending on usage, when:

- A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or

the Wireless Audio with Dock.

- It is subject to electrical variation from obstructions caused by a wall, corner, or by office partitioning.

- It is exposed to electrical interference from same frequency-band devices including medical

equipment, microwave ovens, and wireless LANs.

• Keep the Wireless Audio with Dock and the Bluetooth device close together when pairing.

• The further the distance between the Wireless Audio with Dock and Bluetooth device, the worse the

quality. If the distance exceeds the Bluetooth operational range, the connection is lost.

• In poor reception-sensitivity areas, the Bluetooth connection may not work properly.

• The Bluetooth connection only works when the Bluetooth device is close to the set. The connection is

automatically cut off if the Bluetooth device moves out of range. Even within range, the sound quality

may be degraded by obstacles such as walls or doors.

• This wireless device may cause electric interference during its operation.

▪ You may be required to enter a PIN code (password) when connecting the Bluetooth device to

the Wireless Audio with Dock. If the PIN code input window appears, enter <0000>.

▪ The Wireless Audio with Dock supports SBC data (44.1kHz, 48kHz).

▪ The AVRCP feature is not supported.

▪ Connect only to a Bluetooth device that supports the A2DP (AV) function.

▪ You cannot connect to a Bluetooth device that supports only the HF (Hands Free) function.

▪ Only one Bluetooth device can be paired at a time.

▪ Once you have turned off the Wireless Audio with Dock and the pairing is disconnected, the

pairing will not be restored automatically. To reconnect, you must pair the devices again.

▪ The Wireless Audio with Dock may not search or connect properly in the following cases:

- If there is a strong electrical field around the Wireless Audio with Dock.

- If several Bluetooth devices are simultaneously paired to the Wireless Audio with Dock.

- If the Bluetooth device is turned off, not in place, or malfunctions

- Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and

gas stoves use the same frequency range as the Bluetooth device, which can cause electric

interference.

16

CONNECTING TO BLUETOOTH DEVICES

This section explains how to connect the Wireless Audio with Dock to Bluetooth compatible TVs and other

Bluetooth devices.

To connect the Wireless Audio with Dock to a Bluetooth compatible 2012

Samsung TV (Sound Share)

Connect

To produce TV sound on your Wireless Audio with Dock via Bluetooth connection, you need to pair your system to

the Bluetooth compliant TV first. Once the pairing is established, the pairing information is recorded and kept and no

further Bluetooth connection message will appear from the next time.

1. Turn on the Samsung TV and Wireless Audio with Dock.

•Turn the device “On” in the “SoundShare Settings” menu of the Samsung TV. (Refer to the TV user manual for

instructions)

2. When you change the mode of Wireless Audio with Dock to

, a message asking whether to proceed with

Bluetooth pairing appears. Select <Yes> on the TV screen, then the pairing with the Wireless Audio with Dock

will be completed.

•The Wireless Audio with Dock Bluetooth pairing is complete.

If you want to pair your Wireless Audio with Dock to a TV other than the connected TV, you should cancel the

existing pairing in the Wireless Audio with Dock. It is possible to cancel the pairing in the way below.

The

LED will blink once when you press the Play/Pause key on the remote control for 5 seconds in . This

unit will automatically pair to a TV once you cancel the existing pairing and the new TV is ready for connection.

▪ If the TV cannot be connected, please try to reconnect it after pressing the Play/Pause Key on the

remote control for 5 seconds in the Bluetooth

mode.

▪ You should update a TV software with the latest version to operate TV pairing (Sound Share) function.

▪ Check the instructions for updating and applicable models from the support page on (Samsung. com)

website or contact the call centre.

17

EnG

● connEctions

To connect the Wireless Audio with Dock to a Bluetooth device

Before you begin, confirm that your Bluetooth device supports the Bluetooth compliant stereo headset function.

Connect

External device

1. Touch the button on the front panel of the Wireless Audio with Dock repeatedly until the icon appears in

the display.

• Each time you press the button, the selection changes as follows :

; ; ; ; AUX (LED Off)

• The selected mode is displayed in red in the Function Display.

2. Select the Bluetooth menu on your Bluetooth device.

(Refer to the Bluetooth device's user manual for instructions.)

3. Scan or search for All Devices or for Headsets.

• You will see a list of devices.

4. Select "[Samsung]W_Audio XXXXXX" from the searched list.

• If the Bluetooth device fails to pair with the Wireless Audio with Dock, delete the "[Samsung]W_Audio XXXXXX"

found by the Bluetooth device, and search for the Wireless Audio with Dock again, and then repeat Steps 2, 3,

and 4.

18

playing

USING THE TV MODE (Sound Share)

Touch the button to select the mode, and then connect the TV to the Wireless Audio

with Dock. (See page 16)

• The unit will play the TV's audio when it is connected to the TV.

• If you change the Wireless Audio with Docks Bluetooth input source or turn it off, you will

hear audio from the TV again.

▪ You can control the volume only with the Wireless Audio with Dock.

USING THE DOCKING MODE WITH SAMSUNG GALAXY AND APPLE

DEVICES

Touch the button to select the mode, and then connect the Samsung Galaxy or Apple

device to the Dual Dock. (See page 13)

To use your Samsung Galaxy series device with the Dual Dock, you must download and

install the Docking Mode application from the Android Market on the device. To download,

follow these steps:

1. Tap the Play Store (Android Market) icon on the Samsung Galaxy device's main screen.

2. Tap the search icon on the screen to access the search bar.

3. In the search bar, type in the [Samsung Wireless Audio with Dock], and

then search.

4. In the search result list, find, and then tap [Samsung Wireless Audio with

Dock] to start downloading.

5. Tap [install].

To play music, follow these steps:

1

-1

. If you start the app when the Wireless Audio with Dock is the only device

for the Bluetooth connection,

selecting PLAY in your device automatically establishes the Bluetooth

connection to the Wireless Audio with Dock and the unit plays music.

1

-2

. If there are multiple devices for Bluetooth connection including Wireless Audio with Dock,

1) When you start the app, the list of the devices which you can connect to the Wireless Audio with Dock will

appear.

2) Play music after connecting to the Wireless Audio with Dock by selecting it on the list of devices.

- If there exists a Bluetooth device paired to the Wireless Audio with Dock before, it will not appear in the list

and be connected automatically.

2. If you replace the Wireless Audio with Dock which you have paired to your mobile device, you should delete

the remaining settings saved in your device before pairing to the new one.

•

; [Clear data].

VOLFUNC.

19

EnG

● playinG

▪ Once you started the application, running is not disturbed by charging your mobile device with an

ordinary charger.

▪ When you connect other device to the Wireless Audio with Dock after connecting Samsung Galaxy

device in docking mode, you may have to turn off the Bluetooth mode of the Samsung Galaxy device.

▪ If you have trouble connecting the Samsugn Galaxy device to the Dual Dock, turn off the devices's

Bluetooth mode.

1. Select the mode as described above, and then connect the Apple device to the Dual Dock as described in

Connecting a Device to the Dual Dock (Page 13). You will hear a ringing sound.

2. Select the <Music> menu in the main screen of the Apple device.

3. Select and play the desired music.

• The music will play through the Wireless Audio with Dock's speakers.

▪ While playing a video with your device, Play/Pause/Next/Back operations may not be available.

Use the button on your source device to operate it.

Compatibility list (Apple Device)

Docking mode compatible iPod/iPhone/iPad models

Update the software of your iPod/iPhone/iPad to the latest version before using it with this unit.

- iPod touch (4th generation)

- iPod touch (3rd generation)

- iPod nano (6th generation)

- iPod nano (5th generation)

- iPhone 4S

- iPhone 4

- iPhone 3GS

- iPad 2

- iPad

• Depending on its version of iPod Software, your device may not be compatible or may operate

abnormally.

If you connect an incompatible Apple device, the iPod Function LED will blink.

20

USING THE BLUETOOTH MODE

Touch the button to select the mode, and then connect the Bluetooth device to the

Wireless Audio with Dock. (See page 17)

To connect your Bluetooth device when the Wireless Audio with Dock is in Bluetooth mode,

search for the Wireless Audio with Dock on the device's Bluetooth list. Select the Wireless

Audio with Dock, and then connect. Once the Wireless Audio with Dock has connected,

select and play the desired music.

The music will play through the Wireless Audio with Dock's speakers.

▪ If you want to change the device which is connected through Bluetooth mode to other device,

disconnect the existing device and try to connect to the other device which you want to use.

▪ While in Bluetooth communication, Play/Pause/Next/Back operations may not be available

depending on used mobile device and application.

▪ Operating Bluetooth device paired to the Wireless Audio with Dock may cause stuttering if operated

while the Wireless Audio with Dock is playing back from AUX input.

To disconnect the Bluetooth device from the Wireless Audio With

Dock

You can cancel Bluetooth pairing from the Wireless Audio with Dock. For instructions, see the Bluetooth

device's user manual.

• The Wireless Audio with Dock will be disconnected.

To disconnect the Wireless Audio with Dock from the Bluetooth

device

Touch the button on the top panel of the Wireless Audio with Dock to switch from to another mode

or press the Power button on the remote to turn the Wireless Audio with Dock off.

• The currently connected device will be disconnected.

▪ The Bluetooth connection only works when the Bluetooth device is close to the set. The

connection is automatically cut off if the Bluetooth device moves out of range. Even within

range, the sound quality may be degraded by obstacles such as walls or doors.

▪ If the Bluetooth device comes back into the effective range, you can restart to restore the

pairing with the Bluetooth device.

Pagina se încarcă ...

Samsung DA-E650 Manual de utilizare

Samsung DA-E650 Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente