Silvercrest SEKU 2000 A1 Operating Instructions Manual

Electric Fireplace SEKU 2000 A1

KOMPERNASS GMBH

BURGSTRASSE 21 · D-44867 BOCHUM

www.kompernass.com

ID-Nr.: SEKU 2000 A1-03/11-V3

IAN 66252

7

Electric Fireplace

Operating instructions

Ηλεκτρική εστία τζακιού

Οδηүίες χρήσης

Električni kamin

Upute za upotrebu

Şemineu electric

Instrucţiuni de utilizare

R

Електрическа камина

Ръководство за експлоатация

Elektrokamin

Bedienungsanleitung

CV_66252_SEKU2000A1_LB7.indd 1-2 07.06.2011 14:55:47 Uhr

1

SEKU 2000 A1

GB

CY

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . 2

Information for these operating instructions . . . . .2

Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Limited liability . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Risk of electrocution . . . . . . . . . . . . . . . . . . . . . . .4

Basic Safety Instructions . . . . . . . . . . . . . . . . . . . . 4

Setting up and connecting . . . . . . . . . . . 5

Safety Notices . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Items supplied and delivery checks . . . . . . . . . . .5

Disposal of the packaging . . . . . . . . . . . . . . . . . .5

Installation requirements . . . . . . . . . . . . . . . . . . . .6

Before the ﬁ rst use . . . . . . . . . . . . . . . . . . . . . . . . . 6

Electrical connection . . . . . . . . . . . . . . . . . . . . . . .6

Operating components . . . . . . . . . . . . . 7

Set up . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Individual parts of the electric ﬁ replace . . . . . . . . 8

Screws and assembly material . . . . . . . . . . . . . . .9

Assembly . . . . . . . . . . . . . . . . . . . . . . . . 10

Handling and operation . . . . . . . . . . . 15

Switching the appliance on and oﬀ . . . . . . . . . .15

Maintenance . . . . . . . . . . . . . . . . . . . . . 15

Changing the light bulbs . . . . . . . . . . . . . . . . . . .15

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . 16

Troubleshooting . . . . . . . . . . . . . . . . . . 16

Malfunction causes and remedies . . . . . . . . . . .17

Storage/Disposal . . . . . . . . . . . . . . . . . 17

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Disposal of the appliance . . . . . . . . . . . . . . . . . .17

Appendix . . . . . . . . . . . . . . . . . . . . . . . 18

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Notes on the EC Declaration of Conformity . . . .18

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Importer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Buch_66252_LB7.indb Abs2:1 08.06.2011 15:00:21 Uhr

2

Introduction

SEKU 2000 A1

GB

CY

Introduction

Information for these operating instructions

These operating instructions are a component of the SEKU 2000 A1 Electric Fireplace (henceforth designated

as the appliance) and they provide you with important information about the intended use, safety, installation

and connection as well as operation of the appliance.

These operating instructions must at all times be kept available close to the appliance. They are to be read

and applied by everyone assigned to install, service and repair faults in the appliance.

Keep these operating instructions and hand them over with the appliance to any future owners.

Copyright

This documentation is copyright protected.

Any copying or reproduction of this handbook, including extracts, as well as the rendering of any images,

even in an altered state, is permitted only with the written consent of the manufacturer.

Limited liability

All technical information, data and instructions for installation, connection and operation contained in these

operating instructions correspond to the status at the time of printing and, to the best of our knowledge, take

into account our previous experience and know-how.

No claims can be derived from the details, illustrations and descriptions in these instructions.

The manufacturer assumes no liability for damage caused by failure to observe these instructions, improper

use, inappropriate repairs, making unauthorized modiﬁ cations or for using unapproved replacement parts.

Buch_66252_LB7.indb Abs1:2 08.06.2011 15:00:21 Uhr

3

Introduction

SEKU 2000 A1

GB

CY

Warnings

In these operating instructions the following warnings are used:

DANGER

A warning at this danger level indicates a threateningly dangerous situation.

If the dangerous situation is not avoided, it could result in death or serious injury.

Compliance with the instructions in this warning is necessary to avoid the risk of death or serious injury.

►

WARNING

A warning at this danger level indicates a potentially dangerous situation.

If the dangerous situation is not avoided it can lead to injuries.

The directives in this warning are there to avoid personal injuries.

►

IMPORTANT

A warning of this danger level signiﬁ es possible property damage.

If the situation is not avoided it can lead to property damage.

The directives in this warning are there to avoid property damage.

►

NOTICE

A notice signiﬁ es additional information that assists in the handling of the appliance. ►

Intended use

This appliance is intended for the heating of enclosed living spaces. In addition, artiﬁ cial ﬁ re ﬂ ares can be

created with the appliance to optically replicate an open-hearth ﬁ re.

This appliance is not intended for any other use or for uses other than those mentioned.

WARNING

Risks from unintended use!

Risks can be created by the appliance if it used for unintended purposes and/or for other applications.

Use the appliance exclusively for its intended purposes.

►

Observe the procedures described in these operating instructions. ►

Claims of any kind for damage resulting from unintended use will not be accepted.

The operator alone bears the liability.

Buch_66252_LB7.indb Abs4:3 08.06.2011 15:00:22 Uhr

4

Safety

SEKU 2000 A1

GB

CY

Safety

In this chapter you are being given important safety information regarding the handling of the appliance.

This appliance complies with the statutory safety regulations. Incorrect usage can, however, lead to personal

and property damage.

Do not cover the appliance!

Covering the appliance can cause overheating and thus lead to

the development of a ﬁ re!

Risk of electrocution

DANGER

Risk of electrocution!

A potentially fatal situation can arise from contact with live wires or components!

Pay heed to the following precautions to avoid the risk of electric shock:

Do not use the appliance if the mains power plug or the connecting cable are damaged.

►

Before continuing to use the appliance, arrange for the connecting cable to be replaced by ►

authorised qualiﬁ ed persons.

Do not, under any circumstances, open the appliance housing. There is the risk of receiving

►

an electric shock if the power carrying connections are touched and/or the electrical and

mechanical construction is changed.

Basic Safety Instructions

For safe handling of the appliance observe the following safety information:

Before use check the appliance for visible external damage. Do not put into operation a appliance that is

■

damaged or has been dropped.

Arrange for damaged cables or connections to be replaced by authorized qualiﬁ ed persons or by the

■

Customer Service department.

This appliance is not intended for use by individuals (including children) with restricted physical, physio-

■

logical or intellectual abilities or deﬁ ciences in experience and/or knowledge unless they are supervised

by a person responsible for their safety or receive from this person instruction in how the appliance is to

be used.

Children should be supervised to ensure that they do not play with the appliance.

■

Repairs should only be carried out by authorized specialist companies or by the customer service department. ■

Incorrect repairs can result in signiﬁ cant dangers for the user. In addition warranty claims become void.

During the warranty period repairs to the appliance may only be carried out by a Customer Service

■

department authorised by the manufacturer, if they are not, no additional warranty claims can be

considered for subsequent damages.

Defective components may only be replaced with original replacement parts. Only by using original

■

replacement parts can it be guaranteed that the safety requirements are being complied with.

Buch_66252_LB7.indb Abs3:4 08.06.2011 15:00:22 Uhr

5

Setting up and connecting

SEKU 2000 A1

GB

CY

Protect the appliance from moisture and liquid penetration. ■

The appliance may not be used directly adjacent to a bath-tub, shower or swimming pool. ■

Always pull on the plug when disconnecting from the mains power socket, never pull on the connection cable. ■

Do not use the appliance adjacent to open ﬂ ames. ■

The appliance may not be located directly below a mains power socket. ■

If malfunctions occur or thunder storms threaten, remove the plug from the mains power socket. ■

Never subject the appliance to spray and/or dripwater, do not place any objects ﬁ lled with liquid ■

(i.e. vases), or ﬁ lled drink glasses, on or next to the appliance.

This appliance may not be used with a programme switch, a timer switch, a separate remote control

■

system or any other device that switches the appliance on automatically, as there will be a risk of ﬁ re if

the appliance is covered or positioned incorrectly.

Setting up and connecting

Safety Notices

WARNING

During commissioning of the appliance, damage may occur to persons and property!

Pay heed to the following safety information to avoid these risks:

Packaging material should not be used as a play thing. There is a risk of suﬀ ocation.

►

Comply with the notices in regard to the requirements for the installation site and for the electrical ►

connection to avoid risks for people and property.

Items supplied and delivery checks

The appliance is delivered with the following components as standard:

Electric Fireplace

▯

Lightbulbs, 2 x E14, max. 25 W (preinstalled) ▯

Fireplace panelling including assembly material ▯

Operating instructions ▯

NOTICE

Check the contents to make sure everything is there and for visible damage. ►

If the contents are incomplete, or are damaged due to defective packaging or transportation, contact ►

the Service Hotline (see warranty card).

Disposal of the packaging

The packaging protects the appliance from transport damage. The packaging materials are selected from

the point of view of their environmental friendliness and disposal technology and are therefore recyclable.

The recirculation of packaging into the material circuit saves on raw material and reduces generated waste.

Dispose of packaging material that is no longer needed according to the regionally established regulations.

NOTICE

If possible preserve the appliance's original packaging during the warranty period so that in the case ►

of a warranty claim you can package the appliance properly for return.

Buch_66252_LB7.indb Abs3:5 08.06.2011 15:00:22 Uhr

6

Setting up and connecting

SEKU 2000 A1

GB

CY

Installation requirements

For the safe and correct operation of the appliance, the installation site must satisfy the following requirements:

The appliance must be placed on a ﬁ rm, ﬂ at and horizontal surface.

■

Do not place the appliance in a hot, wet or very humid environment or close to inﬂ ammable materials. ■

The appliance may not be used directly adjacent to a bath-tub, shower or swimming pool. ■

The mains power socket must be easily accessible at all times, thus enabling the plug to be immediately ■

withdrawn should an emergency situation arise.

The appliance may not be located directly below a mains power socket.

■

Ambient temperature range: +5 to +45 °C ■

Humidity (No condensation): 5 - 90 % ■

DANGER

Fire hazard due to material contact!

If the heater makes contact with ﬂ ammable materials, there is a risk of ﬁ re!

Pay heed to the following safety information to avoid these ﬁ re risks:

Keep inﬂ ammable materials well away from the place of installation of the appliance.

►

Prevent the physical contact of combustible materials (e.g. textiles) with the appliance. ►

Do not cover the warm air outlet openings of the appliance. ►

Before the ﬁ rst use

Remove all packaging materials and transport restraints from the appliance. ■

NOTICE

When you ﬁ rst use it, it may temporarily generate a light odour. This is normal and completely harmless. ►

Electrical connection

For a safe and correct operation of the appliance, take note of the following instructions regarding the

electrical connection:

Before you connect the appliance, compare the connection data (voltage and frequency) on the plate

■

with that of your electricity supplier. This data must tally, in order to avoid damage to the appliance.

Ensure that the power cable is undamaged and that it is not placed over hot surfaces and/or sharp edges.

■

The connecting cable must not be taut. ■

Buch_66252_LB7.indb Abs3:6 08.06.2011 15:00:22 Uhr

7

Operating components

SEKU 2000 A1

GB

CY

Operating components

NOTICE

The operating elements are on the front of the appliance, above right and behind the ventilation grille. ►

To operate them, fold the ventilation grille forward. ►

ON/OFF switch (Flames)

2

ON/OFF switch (Heating, level 1)

3

ON/OFF switch (Heating, level 2)

4

Temperature control (Thermostat)

5

Dimmer (for ﬂ ame lamps)

4

3

2

5

Buch_66252_LB7.indb Abs3:7 08.06.2011 15:00:22 Uhr

8

Set up

SEKU 2000 A1

GB

CY

Set up

Before the appliance can be set up, the ﬁ re surround must be assembled.

NOTICE

Check the contents to make sure everything is there and for visible damage. ►

Firstly, become familiar with all parts involved in the assembly. ►

Individual parts of the electric ﬁ replace

2

3

5

6

7

8

4

left side panel

2

left front panel

3

top covering panel

4

right front panel

5

centre front panel

6

Support frame for the ﬁ replace (dismantled)

7

Floor plate

8

right side panel

Buch_66252_LB7.indb Abs3:8 08.06.2011 15:00:22 Uhr

9

Set up

SEKU 2000 A1

GB

CY

Screws and assembly material

No.: Designation: Number:

A

Screws 6 x 25 mm 21

B

Wood plugs 5

C

Double locking pin 6

D

Single locking pin 16

E

Adapter sleeve 28

F

Fixing device 2

G

Connection blocks 4

NOTICE

You require a screwdriver for the assembly; this is not supplied. ►

The assembly of the ﬁ re surround is described in detail in the following.

NOTICE

Carry out the assembly step by step in the order as described. ►

A B C D E

F

G

Buch_66252_LB7.indb Abs3:9 08.06.2011 15:00:23 Uhr

10

Assembly

SEKU 2000 A1

GB

CY

Assembly

Step 1

Screw 5 single locking pins ♦

D

with a screwdriver into the prepared holes on the left front panel

2

.

Insert 5 adapter sleeves

♦

E

into the 5 large holes of the left side panel . Thereby, with the screwdriver

line up the adaptor sleeves

E

so that the arrow on the adaptor sleeves points to the outer edge of the

side panel

.

Then, bring the front panel ♦

2

and side panel together at right angles, so that the locking pins

D

enter the holes on the left edge of the side panel

.

When done, screw all 5 adapter sleeves

♦

E

to the right with the screwdriver until the locking pins are

clamped into the adapter sleeves and the panels are seated ﬁ rmly together and at right angles.

Step 2

Screw 5 single locking pins ♦

D

with a screwdriver into the prepared holes on the right front panel

4

.

Insert 5 adapter sleeves

♦

E

into the 5 large holes of the right side panel

8

. Thereby, with the screwdriver

line up the adaptor sleeves

E

so that the arrow on the adaptor sleeves points to the outer edge of the

side panel

8

.

2

D

E

8

4

D

E

Buch_66252_LB7.indb Abs3:10 08.06.2011 15:00:23 Uhr

11

Assembly

SEKU 2000 A1

GB

CY

Then, bring the front panel ♦

4

and side panel

8

together at right angles, so that the locking pins

D

enter the holes on the right edge of the side panel.

When done, screw all 5 adapter sleeves

♦

E

to the right with the screwdriver until the locking pins are

clamped into the adapter sleeves and the panels are seated ﬁ rmly together and at right angles.

Step 3

Take the centre front panel ♦

5

and lay it face down.

Then place 6 adapter sleeves

♦

E

in the 6 large holes. Turn the adapter sleeves with the screwdriver so

that the arrows on the adapter sleeves each point to the outer edge of the centre front panel

5

.

Insert 6 double locking pins

♦

C

in the holes on the front sides of the panel and turn the adapter sleeves

E

with the screwdriver to the right until the locking pins are ﬁ rmly secured.

Place 2 wood plugs

♦

B

into the holes of the front panel

5

.

Step 4

Now connect the so prepared centre front panel ♦

5

with the side panels prepared in steps 1 and 2.

For this, insert 3 adapter sleeves

♦

E

in the large holes in the side panels. Turn the adapter sleeves

E

with the screwdriver so that the arrows on the adapter sleeves each point to the outer edge of the side

panels.

Then, guide each of the double locking pins

♦

C

of the centre front panel

5

into the corresponding holes

in the edges of the side panels.

When done, turn all 6 adapter sleeves

♦

E

in the centre front panel

5

with the screwdriver to the right,

until all parts are at right angles to each other and ﬁ rmly tightened.

E

5

C

B

E

5

B

C

Buch_66252_LB7.indb Abs3:11 08.06.2011 15:00:24 Uhr

12

Assembly

SEKU 2000 A1

GB

CY

Step 5

Place the ﬂ oor plate ♦

7

on the ﬂ oor.

Insert the 4 connection blocks

♦

G

in the holes of the ﬂ oor plate

7

and secure them with 4 screws of type

A

.

Now take the previously assembled unit and carefully place it on the ﬂ oor plate as shown in the following

♦

diagram.

Then screw together the assembled unit with the connection blocks

♦

G

on the ﬂ oor plate

7

. For this, use

8 screws of the type

A

(2 screws per connection block).

Step 6

Take the top covering panel ♦

3

and place it on the preassembled unit.

Secure the top covering panel

♦

3

from the inner side of the unit with 7 screws of the type

A

.

G

A

G

7

A

3

Buch_66252_LB7.indb Abs3:12 08.06.2011 15:00:24 Uhr

13

Assembly

SEKU 2000 A1

GB

CY

Step 7

Screw the 6 single locking pins ♦

D

with a screwdriver into the holes provided on the front and rear

support frame plates.

Place the 6 adapter sleeves

♦

E

in the large pre-drilled holes in the three middle support frame plates.

Thereby, line up the adaptor sleeves

E

with the screwdriver so that the arrow on the adaptor sleeves

points to the outer edge.

Then, bring all of the plates together so that the single locking pins

♦

D

engage the holes in the middle

support frame plates.

When done, screw all adapter sleeves

♦

E

to the right with the screwdriver until the single locking pins

D

are clamped into the adapter sleeves

E

and the panels are seated ﬁ rmly together and at right angles.

Step 8

Take the support frame ♦

6

and insert 3 wood plugs

B

into the holes of the front plate underside.

Then place the support frame

♦

6

on the ﬂ oor plate

7

so that the 3 wood plugs ﬁ t into the 3 holes in the

ﬂ oor plate.

Rear view Front View

D

E

6

7

B

Buch_66252_LB7.indb Abs3:13 08.06.2011 15:00:25 Uhr

14

Assembly

SEKU 2000 A1

GB

CY

Installing the appliance in the ﬁ re surround

To ﬁ nalise, install the appliance in the assembled ﬁ re surround.

Place the appliance carefully on the base plate (from the rear of the ﬁ re surround) and then push it

♦

gently forward as far as it will go into the opening of the ﬁ re surround.

Secure the appliance to the ﬁ re surround at the edges with the ﬁ xing devices

♦

F

and the screws

6 x 25 mm

A

.

Insert the plug into the mains power socket.

♦

WARNING

Improper laying of the power cable can cause damage to people and property!

Pay heed to the following safety information to avoid these risks:

Do not bend or clamp the power cable and do not lay it tautly.

►

Do not run the power cable over sharp edges. ►

A

F

Buch_66252_LB7.indb Abs3:14 08.06.2011 15:00:25 Uhr

15

Handling and operation/Maintenance

SEKU 2000 A1

GB

CY

Handling and operation

NOTICE

See also "Operating Elements" on page 7. ►

In this chapter you receive important information for the handling and operation of the appliance.

Activate the ON/OFF switch

♦ to turn the unit on. The ﬂ ame replication lights up. Programme in the

desired brightness with the Dimmer

5

.

Then, turn the heater on with the switch

♦

2

; the built-in fan starts to run and the heater is working at level

1 (1000 W).

Activate the additional switch

♦

3

; the heating is now working at level 2 (2000 W).

Using the thermostat

♦

4

, you can set it to the desired temperature. The heat settings switch themselves oﬀ

after reaching the set temperature range, and switch back on when it becomes cooler.

Switching the appliance on and oﬀ

Activate the ON/OFF switch ♦ to turn the appliance on.

Activate the ON/OFF switch

♦ once again to turn the appliance oﬀ .

Maintenance

The maintenance of the appliance is limited to occasional external cleaning.

NOTICE

Keep the appliance, and in particular the ventilation grille, free from dust and dirt. ►

Changing the light bulbs

DANGER

Risk of electrocution!

Contact with electricity can be fatal!

Pay heed to the following safety information to avoid the risks of injury:

Switch the appliance oﬀ .

►

Before changing the bulb, unplug the appliance from the mains power source. ►

WARNING

Risk of injury from sharp edges!

When reaching in through the housing opening, there is a risk of injury from the

sharp edges on sheet metal housing and the reﬂ ector mirrors.

Pay heed to the following safety information to avoid these risks:

Do not touch the edges of the housing and the reﬂ ector mirror

►

11

.

Wear protective gloves if necessary.

►

Buch_66252_LB7.indb Abs3:15 08.06.2011 15:00:26 Uhr

16

Maintenance/Cleaning/Troubleshooting

SEKU 2000 A1

GB

CY

Switch the appliance oﬀ . ♦

Pull the plug from the mains power socket. ♦

Loosen the four screws on the rear panel and remove the metal ventilation panel ♦

9

.

Carefully replace the defective bulb

♦

10

in the light shaft.

Screw the metal ventilation panel

♦

9

back onto the appliance rear.

Cleaning

WARNING

Observe the following safety information to avoid risks and property damage:

Clean the appliance ONLY when it is switched oﬀ and cold. ►

IMPORTANT

Possible damage to the appliance.

Penetrating moisture can cause damage to the appliance.

In order to avoid irreparable damage, when you are cleaning the appliance ensure that moisture

►

cannot get inside it.

Clean the housing exclusively with a soft damp cloth and a mild dishwashing liquid. ■

Troubleshooting

In this chapter you will receive important information for the localisation of malfunctions and remedies for them.

Observe these instructions in order to avoid risks and damage.

WARNING

Observe the following safety information to avoid risks and property damage:

Repairs to electrical appliances may only be carried out by specialists who have been trained by the ►

manufacturer. Considerable risk for the user and damage to the appliance can occur as a result of

incorrect repairs.

9

10

11

Buch_66252_LB7.indb Abs3:16 08.06.2011 15:00:26 Uhr

17

Troubleshooting/Storage/Disposal

SEKU 2000 A1

GB

CY

Malfunction causes and remedies

The following table will help with localising and remedying minor malfunctions:

Defect Possible cause Solution

The ﬂ ame replication does

not light up.

The appliance is not switched on. Switch the appliance on.

The plug is not inserted.

Insert the plug into the

mains power socket.

The mains power socket does

not supply voltage

Check the fuses

The bulbs are defect. Replace the defective bulbs.

The appliance does not heat.

Switch

is not turned on.

Switch

2

is not turned on.

Switch

3

is not turned on.

Heating level control defective

Switch

on.

Switch

2

on.

Switch

3

on.

Inform Customer Services.

The fan does not run.

Switch

is not turned on.

Switch

2

is not turned on.

Fan defect.

Switch

on.

Switch

2

on.

Inform Customer Services.

The heating is not switched oﬀ .

Thermostat

4

falsely adjusted.

Set the thermostat

4

at the

required temperature.

Temperature control

4

defect.

Inform Customer Services.

NOTICE

If you cannot solve the problem with the aforementioned methods, please contact Customer Services. ►

Storage/Disposal

Storage

Disconnect the plug if you are not intending to use the appliance for a long period.

Store the appliance at a dry locality.

Disposal of the appliance

Do not dispose of the apliance in your normal domestic waste. This product is subject to

the provisions of European Directive 2002/96/EC-WEEE (Waste Electrical and Electronic

Equipment).

Dispose of the appliance through an approved disposal centre or at your community waste facility.

Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre.

Buch_66252_LB7.indb Abs3:17 08.06.2011 15:00:26 Uhr

18

Appendix

SEKU 2000 A1

GB

CY

Appendix

Technical data

General

Input voltage 220 - 240 V

~

Mains frequency 50 Hz

Power consumption

Heating level 1

Heating level 2

1000

2000

W

Bulb

2 x Bulbs E14

2 x 25 W

Ambient temperature +5 to +45 °C

Humidity (no condensation) 5 to 90 %

Measurements (W x H x D): 100 x 100 x 39 cm

Weight approx. 45 kg

Notes on the EC Declaration of Conformity

This appliance complies with, in regard to conformance to the basic requirements and other

relevent regulations, the European Directive Low Voltage Directive 2006/95/EC as well

as the European Directive for Electromagnetic Compatibility 2004/108/EC.

The complete original declaration of conformity can be obtained from the importer

Buch_66252_LB7.indb Abs3:18 08.06.2011 15:00:27 Uhr

19

Appendix

SEKU 2000 A1

GB

CY

Warranty

You receive a 3-year warranty for this appliance as of the purchase date. The appliance has been manu-

factured with care and meticulously examined before delivery.

Please retain your receipt as proof of purchase. In the case of a warranty claim, please make contact by

telephone with our Service Department. Only in this way can a post-free despatch for your goods be assured.

NOTICE

The warranty is valid only for material or manufacturing defects not, however, for transport damage, ►

wear and tear or for damage to breakable parts, i.e. switches or rechargeable batteries.

This product is for private use only and is not intended for commercial applications. The warranty becomes

void in the event of abusive and improper handling, use of force and internal tampering not carried out by

our authorised service branch.

Your statutory rights are not restricted in any way by this warranty. The warranty period will not be extended

as a result of repairs made under warranty. This applies also to replacement and repaired parts.

Damages and defects potentially present at the time of purchase must be reported immediately after

unpacking or, at the very least, two days after the date of purchase.

Repairs carried out after expiry of the warranty period are subject to payment.

Service

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E-Mail: k[email protected]

IAN 66252

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: k[email protected]

IAN 66252

CY

Service Cyprus

Tel.: 8009 4409

E-Mail: k[email protected]

IAN 66252

Importer

KOMPERNASS GMBH

BURGSTRASSE 21

44867 BOCHUM, GERMANY

www.kompernass.com

Buch_66252_LB7.indb Abs3:19 08.06.2011 15:00:27 Uhr

Pagina se încarcă...

Silvercrest SEKU 2000 A1 Operating Instructions Manual

Silvercrest SEKU 2000 A1 Operating Instructions Manual

Alte documente