Ubiquiti airFiber NxN Ghid de inițiere rapidă

Marca: Ubiquiti

Model: airFiber NxN

Tip: Ghid de inițiere rapidă

Acest manual este potrivit și pentru

Scalable airFiber

MIMO Multiplexer

Models: AF-MPx4, AF-MPx8

Introduction

Thank you for purchasing the Ubiquiti Networks® airFiberNxN

MIMO Multiplexer. This Quick Start Guide is designed to guide

you through installation and also includes warranty terms.

Package Contents

AF-MPx4

airFiber NxN Multiplexer

AF-MPx8

airFiber NxN Multiplexer

Ubiquiti Networks, Inc. www.ubnt.com

4x4 Radio Bracket 8x8 Radio Bracket* Protective Shrouds

(Left and Right)

Scalable airFiber

MIMO Multiplexer

Models: AF-MPx4, AF-MPx8

M4x12 Screws

(Qty. 2)

M3x8 Screws*

(Qty. 4)

Quick Start Guide

* Only included with the AF-MPx8.

cable and earth grounding must be used as conditions of product warranty. TOUGHCable

™

is designed for outdoor installations. It is the customer’s responsibility to follow local country

regulations, including operation within legal frequency channels, output power, and Dynamic

Frequency Selection (DFS) requirements.

airFiber X Compatibility

The airFiber NxN is designed for use with airFiber 5X radios,

(model AF-5X) and 5 GHz airFiber X or RocketDish

™

antennas.

Note: The airFiber X Antenna OMT Conversion Kit

(AF-5G-OMT-S45) is highly recommended when using a

RocketDish for proper fitting and improved frequency

isolation.

Installation Requirements

• (2) airFiber 5X radios for AF-MPx4

• (4) airFiber 5X radios for AF-MPx8

• airFiber X or RocketDish antenna

• Clear view of the sky for proper GPS operation

• Ground wires – min. 10 AWG (5 mm

) and max. length:

1m. Asa safety precaution, ground the airFiber radios to

grounded masts, poles, towers, or grounding bars.

WARNING: Failure to properly ground your

airFiber radio will void your warranty.

Note: For guidelines about grounding and

lightning protection, follow your local electrical

regulatorycodes.

• Outdoor, shielded Category 6 (or above) cabling and

shielded RJ-45 connectors are required for all wired

Ethernetconnections.

Hardware Overview

airFiber NxN Multiplexer

Chain 0 Chain 1

RF Cables

(AF-MPx8 Shown)

Chain 0 Connect the antenna RF +45° to this connector.

Chain 1 Connect the antenna RF -45° to this connector.

RF Cables Connect each RF Cable pair to the corresponding

RFconnection chain on each airFiber 5X radio. For example,

connect cable A0 to Chain 0, and cable A1 to Chain 1.

Configure the airFiber 5X Radio

Note: The airFiber 5X radios must be running airOS®F

v3.2.1 or newer. The latest firmware is available at:

downloads.ubnt.com/airfiber

Each airFiber 5X radio must be preconfigured for use with the

airFiberNxN before installing them at the site. Configuration

details are available in the airFiber X User Guide, available at:

downloads.ubnt.com/airfiber

Enable airFiber NxN support on each radio:

1. Log into the airOS F Configuration Interface.

2. Click the Wireless tab.

3. Enter the additional Cable Loss value (dB):

a. 4.1 for the AF-MPx4, or

b. 7.2 for the AF-MPx8

4. For the NxN Radio setting, select Enable.

5. Click Change, and then click Apply.

Hardware Installation

The following installation shows the AF-MPx8. For the

AF-MPx4 installation, only the mounting and connecting of

two airFiber 5X radios apply.

1. (For AF-MPx8 only) Attach the 8x8 Radio Bracket to the 4x4

Radio Bracket using four M3x8 Screws.

2. Seat the airFiber NxN Multiplexer into the 4x4 Radio Bracket

either at (a) a 15° angle or (b) vertically:

a. For most antenna models, the airFiber NxN Multiplexer

should be installed at a 15° angle. Insert the airFiber NxN

Multiplexer from behind the 4x4 Radio Bracket and slide

the 15° Angle Tabs into the slots on the bracket.

15° Angle Tab

b. For other antenna configurations that require the

airFiber NxN assembly to be mounted to a pole, the

airFiber NxN Multiplexer must be installed vertically.

Insert the airFiber NxN Multiplexer from behind the 4x4

Radio Bracket and slide the Vertical Tabs into the slots

on the bracket.

Vertical Tab

3. Secure the airFiber NxN Multiplexer to the 4x4 Radio Bracket

using two M4x12 Screws.

Note: Ensure the airFiber 5X radios are preconfigured

and the ground wires are installed as outlined in the

radio’s Quick Start Guide before mounting the radios.

4. Mount the airFiber 5X radios to the 4x4 Radio Bracket:

a. Align the mounting tabs on the back of the radio with

the mounting bracket.

b. Slide the radio down to lock it into place.

Ubiquiti Networks, Inc. www.ubnt.com

5. Mount the airFiber 5X radios to the 8x8 Radio Bracket:

a. Align the mounting tabs on the back of the radio with

the mounting bracket.

b. Slide the radio down to lock it into place.

Ubiquiti Networks, Inc. www.ubnt.com

*640-00230-02*

640-00230-02

6. Connect the RF Cables to the airFiber 5X radios. Connect

each RF Cable pair to the corresponding RFconnection

chain on each radio. For example, connect cable A0 to

Chain 0, and cable A1 to Chain 1.

7. Attach the airFiber NxN assembly to the airFiber X or

RocketDish antenna:

a. Align the mounting tabs on the back of the airFiber NxN

Multiplexer with the mounting bracket.

b. Slide the airFiber NxN Multiplexer down to lock it into

place on the bracket.

Note: The airFiber NxN assembly may be pole-mounted

if it cannot be attached to the antenna. See the

Pole-Mounting section for details.

8. Connect the RF cables from the antenna to the RF

connectors on the airFiber NxN Multiplexer. Connect +45° to

Chain 0 and -45° to Chain 1.

9. Attach the GPS antennas to each of the airFiber 5X radios.

10. Mount the GPS antennas in a location that has a clear view

of the sky, and is above and as far away from the radios as

possible.

11. Attach the Protective Shrouds:

a. Insert the Protective Shroud’s attachment tab between

the airFiber 5X radio and the 4x4 Radio Bracket.

b. Push the Protective Shroud down until the attachment

tab locks into place.

12. Secure the grounding wire from each radio to a grounded

mast, pole, tower, or grounding bar.

WARNING: Failure to properly ground your

airFiber radio will void your warranty.

Note: The ground wire should be as short as

possible and no longer than one meter in length.

Pole-Mounting

1. Ensure the airFiber NxN Multiplexer is installed vertically in

the 4x4 Radio Bracket.

2. Mount the airFiber NxN assembly to the pole using two

metal straps (not included):

a. Insert a metal strap through each mounting bracket on

the back of the airFiber NxN Multiplexer and 4x4 Radio

Bracket.

b. Secure both staps around the pole.

3. Connect the RF cables from the antenna to the

RFconnectors on the airFiber NxN Multiplexer. Connect

+45° to Chain 0 and -45° to Chain 1.

Specifications

AF-MPx4

Dimensions 197.5 x 240.9 x 103.2 mm

(7.78 x 9.48 x 4.06")

Weight 0.4 kg (0.8 lb)

RF Connectors (2) RP-SMA Weatherproof (CH0, CH1)

(4) RP-SMA Weatherproof

(A0, A1, B0, B1)

Cable Loss 4.1 dB

Supported airFiber X Radio AF-5X

Multiplex MIMO 2 x (2x2)

Mounting airFiber X/Rocket Mount Compatible

AF-MPx8

Dimensions 210.5 x 240.9 x 109 mm

(8.29 x 9.48 x 4.29")

Weight 0.45 kg (1.0 lb)

RF Connectors (2) RP-SMA Weatherproof (CH0, CH1)

(8) RP-SMA Weatherproof

(A0, A1, B0, B1, C0, C1, D0, D1)

Cable Loss 7.2 dB

Supported airFiber X Radio AF-5X

Multiplex MIMO 4 x (2x2)

Mounting airFiber X/Rocket Mount Compatible

Limited Warranty

UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the

product(s) furnished hereunder (the “Product(s)”) shall be free from defects

in material and workmanship for a period of one (1) year from the date

of shipment by UBIQUITI NETWORKS under normal use and operation.

UBIQUITI NETWORKS’ sole and exclusive obligation and liability under

the foregoing warranty shall be for UBIQUITI NETWORKS, at its discretion,

to repair or replace any Product that fails to conform to the above

warranty during the above warranty period. The expense of removal and

reinstallation of any Product is not included in this warranty. The warranty

period of any repaired or replaced Product shall not extend beyond its

original term.

Warranty Conditions

The above warranty does not apply if the Product:

(I) has been modified and/or altered, or an addition made thereto,

except by Ubiquiti Networks, or Ubiquiti Networks’ authorized

representatives, or as approved by Ubiquiti Networks in writing;

(II) has been painted, rebranded or physically modified in any way;

(III) has been damaged due to errors or defects in cabling;

(IV) has been subjected to misuse, abuse, negligence, abnormal

physical, electromagnetic or electrical stress, including lightning

strikes, or accident;

(V) has been damaged or impaired as a result of using third party

firmware;

(VI) has no original Ubiquiti MAC label, or is missing any other original

Ubiquiti label(s); or

(VII) has not been received by Ubiquiti within 30 days of issuance of

the RMA.

In addition, the above warranty shall apply only if: the product has been

properly installed and used at all times in accordance, and in all material

respects, with the applicable Product documentation; all Ethernet cabling

runs use CAT5 (or above), and for outdoor installations, shielded Ethernet

cabling is used, and for indoor installations, indoor cabling requirements

are followed.

Returns

No Products will be accepted for replacement or repair without obtaining

a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS

during the warranty period, and the Products being received at UBIQUITI

NETWORKS’ facility freight prepaid in accordance with the RMA process of

UBIQUITI NETWORKS. Products returned without an RMA number will not

be processed and will be returned freight collect or subject to disposal.

Information on the RMA process and obtaining an RMA number can be

found at: www.ubnt.com/support/warranty.

Disclaimer

EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI

NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA,

SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM

AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND,

EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO,

REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY,

ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY,

SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS

FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT AND ANY

WARRANTIES ARISING FROM ANY COURSE OF DEALING, USAGE OR

TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS AND SERVICES.

BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI NETWORKS NOR

ITS THIRD PARTY PROVIDERS CONTROL BUYER’S EQUIPMENT OR THE

TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING

THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE

SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS

AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS

FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD

PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS,

DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT

CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY

OF THE FOREGOING. In addition, UBIQUITI NETWORKS does not warrant

that the operation of the Products will be error-free or that operation will

be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible

for damages or claims of any nature or description relating to system

performance, including coverage, buyer’s selection of products (including

the Products) for buyer’s application and/or failure of products (including

the Products) to meet government or regulatory requirements.

Limitation of Liability

EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL

UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR

DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES

(INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING

OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE

PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER

LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES.

Note

Some countries, states and provinces do not allow exclusions of implied

warranties or conditions, so the above exclusion may not apply to you.

You may have other rights that vary from country to country, state to

state, or province to province. Some countries, states and provinces do not

allow the exclusion or limitation of liability for incidental or consequential

damages, so the above limitation may not apply to you. EXCEPT TO

THE EXTENT ALLOWED BY LOCAL LAW, THESE WARRANTY TERMS DO

NOT EXCLUDE, RESTRICT OR MODIFY, AND ARE IN ADDITION TO, THE

MANDATORY STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF ANY

SOFTWARE (EMBEDDED IN THE PRODUCT) TO YOU. The United Nations

Convention on Contracts for the International Sale of Goods shall not apply

to any transactions regarding the sale of the Products.

Declaration of Conformity

Česky

[Czech]

UBIQUITI NETWORKS tímto prohlašuje, že toto UBIQUITI

NETWORKS zařízení, je ve shod se základními požadavky a dalšími

příslušnými ustanoveními směrnice 1999/5/ES.

Dansk

[Danish]

Hermed, UBIQUITI NETWORKS, erklærer at denne UBIQUITI

NETWORKS enhed, er i overensstemmelse med de væsentlige krav

og øvrige relevante krav i direktiv 1999/5/EF.

Nederlands

[Dutch]

Hierbij verklaart UBIQUITI NETWORKS, dat deze UBIQUITI

NETWORKS apparaat, in overeenstemming is met de essentiële

eisen en de andere relevante bepalingen van richtlijn 1999/5/EC.

English

Hereby, UBIQUITI NETWORKS, declares that this UBIQUITI

NETWORKS device, is in compliance with the essential requirements

and other relevant provisions of Directive 1999/5/EC.

Eesti

[Estonian]

Käesolevaga UBIQUITI NETWORKS kinnitab, et antud UBIQUITI

NETWORKS seade, on vastavus olulistele nõuetele ja teistele

asjakohastele sätetele direktiivi 1999/5/EÜ.

Suomi

[Finnish]

Täten UBIQUITI NETWORKS vakuuttaa, että tämä UBIQUITI

NETWORKS laite, on yhdenmukainen olennaisten vaatimusten ja

muiden sitä koskevien direktiivin 1999/5/EY.

Français

[French]

Par la présente UBIQUITI NETWORKS déclare que l’appareil

UBIQUITI NETWORKS, est conforme aux exigences essentielles et

aux autres dispositions pertinentes de la directive 1999/5/CE.

Deutsch

[German]

Hiermit erklärt UBIQUITI NETWORKS, dass sich dieses UBIQUITI

NETWORKS Gerät, in Übereinstimmung mit den grundlegenden

Anforderungen und den anderen relevanten Vorschriften der

Richtlinie 1999/5/EG befindet.

Ελληνική

[Greek]

Δια του παρόντος, UBIQUITI NETWORKS, δηλώνει ότι αυτή η

συσκευή UBIQUITI NETWORKS, είναι σε συμμόρφωση με τις

βασικές απαιτήσεις και τις λοιπές σχετικές διατάξεις της οδηγίας

1995/5/ΕΚ.

Magyar

[Hungarian]

Ezennel UBIQUITI NETWORKS kijelenti, hogy ez a UBIQUITI

NETWORKS készülék megfelel az alapvető követelményeknek és

más vonatkozó 1999/5/EK irányelv rendelkezéseit.

Íslenska

[Icelandic]

Hér, UBIQUITI NETWORKS, því yfir að þetta UBIQUITI NETWORKS

tæki er í samræmi við grunnkröfur og önnur viðeigandi ákvæði

tilskipun 1999/5/EC.

Italiano

[Italian]

Con la presente, UBIQUITI NETWORKS, dichiara che questo

dispositivo UBIQUITI NETWORKS, è conforme ai requisiti essenziali

ed alle altre disposizioni pertinenti della direttiva 1999/5/CE.

Latviski

[Latvian]

Ar šo, UBIQUITI NETWORKS, deklarē, ka UBIQUITI NETWORKS

ierīce, ir saskaņā ar būtiskajām prasībām un citiem attiecīgiem

noteikumiem Direktīvā 1999/5/EK.

Lietuviškai

[Lithuanian]

UBIQUITI NETWORKS deklaruoja, kad šis UBIQUITI NETWORKS

įrenginys atitinka esminius reikalavimus ir kitas 1999/5/EB

Direktyvos nuostatas.

Malti

[Maltese]

Hawnhekk, UBIQUITI NETWORKS, tiddikjara li dan il-mezz

UBIQUITI NETWORKS huwa konformi mar-rekwiżiti essenzjali u

dispożizzjonijiet rilevanti oħrajn ta ‘Direttiva 1999/5/EC.

Norsk

[Norwegian]

Herved UBIQUITI NETWORKS, erklærer at denne UBIQUITI

NETWORKS enheten, er i samsvar med de grunnleggende kravene

og andre relevante bestemmelser i direktiv

1999/5/EF.

Slovensky

[Slovak]

Týmto

UBIQUITI NETWORKS

, prehlasuje, že toto

UBIQUITI

NETWORKS

zariadenie, je v súlade so základnými požiadavkami a

ďalšími relevantnými ustanoveniami smernice 1999/5/ES.

Svenska

[Swedish]

Härmed UBIQUITI NETWORKS, intygar att denna UBIQUITI

NETWORKS enhet är i överensstämmelse med de väsentliga

egenskapskrav och övriga relevanta bestämmelser som framgår av

direktiv 1999/5/EG.

Español

[Spanish]

Por medio de la presente UBIQUITI NETWORKS declara que este

dispositivo UBIQUITI NETWORKS, cumple con los requisitos

esenciales y cualesquiera otras disposiciones aplicables o exigibles

de la Directiva 1999/5/CE.

Polski

[Polish]

Niniejszym, Ubiquiti Networks, oświadcza, że urządzenie UBIQUITI

NETWORKS, jest zgodny z zasadniczymi wymaganiami oraz

pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

Português

[Portuguese]

UBIQUITI NETWORKS declara que este dispositivo UBIQUITI

NETWORKS, está conforme com os requisitos essenciais e outras

disposições da Directiva 1999/5/CE.

Română

[Romanian]

Prin prezenta, UBIQUITI NETWORKS declară că acest dispozitiv

UBIQUITI NETWORKS este în conformitate cu cerințele esențiale și

alte prevederi relevante ale Directivei 1999/5/CE.

Online Resources

Support support.ubnt.com

Community community.ubnt.com

Downloads downloads.ubnt.com

Networks, the Ubiquiti U logo, the Ubiquiti beam logo, airFiber, airOS, Rocket,

RocketDish, and TOUGHCable are trademarks or registered trademarks of

Ubiquiti Networks, Inc. in the United States and in other countries. All other

trademarks are the property of their respective owners. PH012816

www.ubnt.com

Ubiquiti airFiber NxN Ghid de inițiere rapidă

Marca: Ubiquiti

Model: airFiber NxN

Tip: Ghid de inițiere rapidă

Acest manual este potrivit și pentru

Descărcați PDF

raport

în alte limbi

English: Ubiquiti airFiber NxN Quick start guide
italiano: Ubiquiti airFiber NxN Guida Rapida

Ubiquiti airFiber NxN Ghid de inițiere rapidă

Acest manual este potrivit și pentru

Ubiquiti airFiber NxN Ghid de inițiere rapidă

în alte limbi

Lucrări înrudite