5019 100 75058
AKB 397
1.
Control panel.
2.
Grease filter (inside the extractor grille).
3.
Extractor grille fixing screws.
4.
Lighting unit.
REMOVING AND RENEWING OR
CLEANING THE GREASE FILTER
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the extractor grille and unscrew the
fixing screws to access the grease filter.
3.
Remove the device fixing the grease filter.
4.
Remove the dirty grease filter.
5.
After replacing or cleaning the grease filter
(depends on model), remount in reverse
order, making sure the entire extraction
surface is covered.
REPLACING BULBS
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the extractor grille and unscrew the
fixing screws to access the bulbs.
3.
Remove the burnt-out bulb.
Use 40W max E14 bulbs only.
4.
Remount the extractor grille.
FITTING OR RENEWING THE CARBON
FILTER
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the extractor grille and unscrew the
fixing screws to access the carbon filter
(or the carbon filter location).
3.
Fitting:
Cut off the plastic tab (
c
). Fit the
carbon filter over the motor protection grille -
the reference mark (
a
) on the edge of the
carbon filter should line up with the arrow on
the fan shroud (
b
). Turn clockwise.
Removing:
turn anti-clockwise.
4.
Remount the extractor grille.
CONTROL PANEL
A.
Speed selector.
B.
Light switch.
2
3
1
3
4 4
a
b
c
AB
small amount of steam and fumes
large amount of steam and fumes
a
PRODUCT DESCRIPTION
H SK CZ BGPLRUS GBRO