Yamaha CDR-HD1000 Manualul proprietarului

CDR-HD1000

G

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

Compact Disc Recorder

Lecteur/Enregistreur CD

TEXT/TIME MODE/SET

MULTI JOG

DIGITAL REC LEVEL

PUSH ENTER

TRACK NO.

FINALIZE ERASE

BOOKMARK

COMPLETE

MENU

CLEAR

MIN MAX

OPTICAL

ANALOG REC LEVEL

INPUT

REC

COAXIAL

ANALOG

CAUTION

CAUTION: READ THIS BEFORE OPERATING THIS UNIT

• To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

• Install this unit in a well ventilated, cool, dry, clean place with at

least 30cm on the top, 20cm on the right and left, and 10cm at the

back of this unit for ventilation space – away from direct sunlight,

heat sources, vibration, dust, moisture, and/or cold.

• Locate this unit away from other electrical appliances, motors, or

transformers to avoid humming sounds. To prevent fire or

electrical shock, do not place this unit where it may get exposed

to rain, water, and/or any type of liquid.

• Do not expose this unit to sudden temperature changes from cold

to hot, and do not locate this unit in a environment with high

humidity (i.e. a room with a humidifier) to prevent condensation

inside this unit, which may cause an electrical shock, fire, damage

to this unit, and/or personal injury.

• On the top of this unit, do NOT place:

• Other components, as they may cause damage and/or

discoloration on the surface of this unit.

• Burning objects (i.e. candles), as they may cause fire, damage

to this unit, and/or personal injury.

• Containers with liquid in them, as they may cause electrical

shock to the user and/or damage to this unit.

• Do not cover the rear panel of this unit with a newspaper,

tablecloth, curtain, etc. in order not to obstruct heat radiation. If

the temperature inside this unit rises, it may cause fire, damage to

this unit, and/or personal injury.

• Do not plug in this unit to a wall outlet until all connections are

complete.

• Do not operate this unit upside-down. It may overheat, possibly

causing damage.

• Do not use force on switches, knobs and/or cords.

• When disconnecting the power cord from the wall outlet, grasp

the plug; do not pull the cord.

• Do not clean this unit with chemical solvents; this might damage

the finish. Use a clean, dry cloth.

• Only voltage specified on this unit must be used. Using this unit

with a higher voltage than specified is dangerous and may cause

fire, damage to this unit, and/or personal injury. YAMAHA will

not be held responsible for any damage resulting from use of this

unit with a voltage other than specified.

• To prevent damage by lightning, disconnect the power cord from

the wall outlet during an electrical storm.

• Take care of this unit so that no foreign objects and/or liquid

drops inside this unit.

• Do not attempt to modify or fix this unit. Contact qualified

YAMAHA service personnel when any service is needed. The

cabinet should never be opened for any reasons.

• When not planning to use this unit for long periods of time (i.e.

vacation), disconnect the AC power plug from the wall outlet.

• Be sure to read the “Troubleshooting” section on common

operating errors before concluding that this unit is faulty.

• Before moving this unit, first check that there is no disc in the disc

tray. Finally, press POWER to turn off this unit, and disconnect

the AC power plug from the wall outlet.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

IMPORTANT

The wires in this mains lead are coloures in accordance with the

following code:

GREEN-and-YELLOW:Earth

BLUE:Neutral

BROWN:Live

As the colours of the wires in the mains lead of this apparatus

may not correspond with the coloured markings identifying the

terminals in your plug proceed as follows: The wire which is

coloured GREEN-and-YELLOW must be connected to the

terminal in the plug which is marked by the letter E or by the

safety earth symbol or coloured GREEN or GREEN-and -

YELLOW. The wire which is coloured BLUE must be

connected to the terminal which is marked with the letter N or

coloured BLACK. The wire which is coloured BROWN must be

connected to the terminal which is marked with the letter L or

coloured RED.

For U.K. customers

If the socket outlets in the home are not suitable for the plug

supplied with this appliance, it should be cut off and an appropriate

3 pin plug fitted. For details, refer to the instructions described

above.

Note: The plug severed from the mains lead must be destroyed, as

a plug with bared flexible cord is hazardous if engaged in a live

socket outlet.

Laser component in this product is capable of emitting radiation

exceeding the limit for Class 1.

E-1

PREPARATION

RECORDING AND

COPYING

EDITING

PLAYBACK

ADDITIONAL

INFORMATION

English

Features

• Copying a CD to the HDD at maximum 10x speed

• Copying data on the HDD to a CD-R disc at maximum 8x speed

• Copying data on the HDD to a CD-RW disc at maximum 4x

speed

• CD TEXT compatible

Contents

PREPARATION

Features .................................................................................. 1

DISCS COMPATIBLE WITH THIS UNIT .......................... 2

PREPARATION ............................................................... 4

Supplied Accessories ............................................................. 4

Remote Control ..................................................................... 5

Connections ........................................................................... 6

CONTROLS AND FUNCTIONS ...................................... 7

Front Panel ............................................................................. 7

Remote Control ..................................................................... 8

Display ................................................................................... 9

Display Information ............................................................. 10

RULES OF DIGITAL RECORDING AND NOTES ON

SYSTEM .................................................................... 11

Rules of Digital Recording .................................................. 11

Notes on System .................................................................. 11

RECORDING AND COPYING

RECORDING AND COPYING ....................................... 13

Usable Recording Media ..................................................... 13

Types of Recording and Copying ........................................ 13

Before Starting to Record and Copy ................................... 13

BASIC RECORDING OPERATION ............................... 14

Recording from an External Component onto the HDD ..... 14

Recording from an External Component onto a CD-R or

CD-RW Disc ................................................................... 15

Selecting an Input Source .................................................... 17

Adjusting the Recording Level ............................................ 17

Finalization .......................................................................... 19

ADVANCED RECORDING OPERATION ...................... 20

Selecting a Disc for Recording ............................................ 20

Setting the Recording Mode ................................................ 20

Manual Track Marking ........................................................ 21

BASIC COPYING OPERATION .................................... 22

Copying from a CD onto the HDD ...................................... 22

Copying from the HDD onto a CD-R or CD-RW Disc ....... 24

Duplication of a CD ............................................................. 26

ADVANCED COPYING OPERATION ........................... 28

Selecting a Disc to Be Copied on ........................................ 28

Setting the Copying Mode ................................................... 28

Copying Menu Setting ......................................................... 29

EDITING

ALBUM EDITING .......................................................... 31

TRACK EDITING ........................................................... 37

DISC EDITING ............................................................... 46

UNDO FUNCTION ......................................................... 50

ERASING A CD-RW DISC ............................................ 51

PLAYBACK

BASIC PLAYBACK OPERATION ................................. 52

Playing a CD ........................................................................ 52

Playing Tracks on the HDD ................................................. 52

Finding the Desired Passage (Search) ................................. 53

Finding the Desired Group (Group Skip) ............................ 53

Finding the Desired Track (Track Skip) .............................. 54

ADVANCED PLAYBACK OPERATION ......................... 55

Setting the Play Style ........................................................... 55

Random Play ....................................................................... 56

Single Repeat Play ............................................................... 56

Full Repeat Play .................................................................. 57

Intro Play ............................................................................. 57

Album Play .......................................................................... 58

Bookmark Play .................................................................... 58

Listening with Headphones ................................................. 58

ADDITIONAL INFORMATION

OTHERS ........................................................................ 59

HDD Utility ......................................................................... 59

System Utility ...................................................................... 60

DAC (Digital/Analog Converter) Mode .............................. 62

Display Messages ................................................................ 63

Troubleshooting ................................................................... 64

Specifications....................................................................... 65

ENGLISH

Introduction

Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the best performance,

read this manual carefully. It will guide you in operating your YAMAHA product.

This unit has a built-in hard disk drive (HDD) with large capacity

that makes a long recording possible. You can copy several CDs

onto the HDD, pick up and play your favorite from the copied data

on the HDD. Moreover, various sound sources recorded to the HDD

can be edited variously. By copying the edited sound source to CD-

R or CD-RW discs, your original CD can be easily created by this

unit itself.

E-2

■ Discs that can be used for recording on this unit

Be sure to use only CD-R and CD-RW discs made by reliable

manufacturers.

CD-R and CD-RW digital audio discs that display either of the

following marks can be used with this unit.

■ Discs that can be used for recording

• CD-R discs can only be recorded on once, and the recorded

material cannot be erased.

• CD-RW discs can be recorded on, have the recorded material

erased, and then recorded on again any number of times.

■ Discs that cannot be used for recording on this unit

• Discs bearing marks other than those shown above.

• Discs intended for recording computer data.

• Discs intended for professional use or labeled “FOR

PROFESSIONAL USE ONLY”.

■ Finalization of CD-R discs for playback on standard

CD players

Although a partially recorded CD-R disc can be played on this unit,

it cannot be played on a standard CD player until it has undergone a

process known as “finalization”. In the finalization process, the

Table of Contents (TOC) is written onto the disc and further

recording is not possible.

However, this process makes it possible to play a CD-R disc on a

standard CD player.

Some CD players may not play back the finalized CD-R discs

properly due to differences in the playback system of different

manufacturers.

See page 19 for the finalization procedure.

■ Erasure or loss of data

Yamaha and suppliers accept no liability for the loss of data written

on the HDD and CD-R or CD-RW discs, or any problems caused as

a result of using this unit. As a precaution, it is recommended that

the discs are tested after they have been recorded on. Furthermore,

under no circumstances do Yamaha and suppliers guarantee the

reliability of the discs.

■ Discs that can be played back

In addition to CD-R and CD-RW digital audio discs described

above, commercially available pre-recorded CDs bearing the marks

shown below can also be played on this unit.

DISCS COMPATIBLE WITH THIS UNIT

FOR CONSUMER

FOR CONSUMER USE

FOR MUSIC USE ONLY

■ Playback of CD-RW discs

Please note that even after a CD-RW disc has been finalized, it still

cannot be played on a standard CD player.

CD-RW discs can only be played back on CD-RW-compatible

players such as this unit.

Additionally, CD-RW discs can be erased even after finalization has

been performed, and recorded on again.

■ Playback on DVD players

Before playing back a finalized CD-R or CD-RW discs on a DVD

player, please check whether the DVD player is compatible with

CD-R or CD-RW discs or not. Refer to the owner’s manual of the

DVD player for more information. CD-R or CD-RW discs cannot

be played on a DVD player that is not compatible with CD-R or

CD-RW discs.

IMPORTANT

• Please check the copyright laws in your country to record from

records, CDs, radio, etc. Recording of copyright material may

infringe copyright laws.

E-3

PREPARATION

English

DISCS COMPATIBLE WITH THIS UNIT

■ Handling of discs

Heed the following notes on handling of discs not to create any

cause for a recording failure, a loss of the recorded data, or a

malfunction of this unit.

• This compact disc recorder is designed for use with CDs

(including 8cm [3”] discs) bearing the , , , or

marks only. Never attempt to load any other type of disc into this

unit.

• CDs are not subjected to wear during play. However if the disc is

handled improperly, damage may be created on the disc to

adversely affect the disc’s play.

• Do not use cleaning discs or warped discs. All of these could

damage this unit.

• Although playback of CDs is generally not affected by small

particles of dust or fingerprints on their playing surface, dust,

fingerprints, small scratches and direct sunlight on the recording

surface of a CD-R or CD-RW disc may make recording

impossible. Therefore, for optimal performance of the recorder

and for long-term enjoyment of your CD collection, handle discs

correctly as outlined in the following guidelines.

1. Hold discs by touching only the edges or center hole.

2. When a disc is not currently being used, remove it from the

recorder and store in an appropriate case.

3. With proper disc maintenance, cleaning should not be

necessary. However, should cleaning be required, wipe by

using a clean, dry cloth. Do not wipe with a circular motion;

wipe straight outward from the center.

• Do not try to clean the disc’s surface by using any type of disc

cleaner, record spray, antistatic spray or liquid, or any other

chemical-based liquid, because such substances might irreparably

damage the disc’s surface.

• Do not expose discs to direct sunlight, high temperature, or high

humidity for a long period of time, because this might warp or

otherwise damage the disc.

No!

■ To prevent a malfunction of this unit

• Do not use any non-standard shaped CDs (heart, flower shaped,

etc.) available on the market, because they are off-balance in their

weight.

If a non-standard shaped CD is loaded into this unit, it may create

problems such as improper playback, opening the disc tray,

creating an usual noise, and this unit’s failure.

• Be sure to use a felt-tip pen or similar writing tool when writing

on the label side of the disc. Do not use a ball-point pen, pencil, or

other hard-tipped writing tool, as these may damage the disc and

may adversely affect further recording on the disc.

• Do not use the discs with glue left on their surface. It may get

stuck in this unit or create damage to this unit.

• When using an 8cm (3”) disc, do not place a normal 12cm (5”)

disc on top of it.

E-4

Supplied Accessories

After unpacking, make sure the following items are included in your package.

PREPARATION

• Remote Control • Batteries (size AA, UM-3, or R6) (2)

• RCA Pin Cables (2)

• Optical Fiber Cable

OPEN/CLOSE

COPY REC

TEXT/TIME

INPUT

MODE/SET

MENU

CLEAR

1

ABC

2

DEF

3

GHI

4

JKL

5

MNO

6

PQR

7

STU

8

VWX

9

YZ

SPACE

SYMBOL

0 +10

BOOKMARK

REPEAT RANDOM

GROUP SKIP

INTRO

ENTER

COMPLETE

FINALIZE ERASE

TRACK NO.

WRITE

HDD CDR

E-5

PREPARATION

English

PREPARATION

Remote Control

Cautions

• If operation of this unit by the remote control creates any malfunction in any other components, change the placement of the component.

• Do not spill any liquid on or drop the remote control. Do not place it near a heater or in the bathroom where the temperature and humidity

become high.

• Make sure the remote control sensor is not exposed to direct sunlight or strong lights. If it is, it may not function correctly.

■ Loading the batteries in the remote control

1. Remove the battery compartment cover on the back

of the remote control.

2. Insert 2 batteries (AA, UM-3 or R6 type) according to

the polarity markings on the inside of the battery

compartment.

3. Close the cover until it snaps into place.

■ Battery replacement

If you find that the remote control must be used closer to this unit

than usual, the batteries are weak. Replace both batteries with new

ones.

■ Notes on batteries

• Use only AA, UM-3, or R6 type batteries for replacement.

• Do not mix a new battery with a used one.

• A rechargeable battery cannot be used.

• Do not mix different types of battery.

• Do not attempt to short out the batteries by directly connecting the

plus (+) and the minus (–) with a piece of metal.

• Remove the batteries if the remote control will not be used for an

extended period of time.

• If batteries leak, dispose of them immediately. Clean the battery

compartment thoroughly before installing new batteries.

2

1

3

■ Remote control operation range

NATURAL SOUND HDD/CD RECORDER CDR–HD1000

TEXT/TIME MODE/SET

MULTI JOG

DIGITAL REC LEVEL

PUSH ENTER

TRACK NO.

FINALIZE ERASE

BOOKMARK

COMPLETE

MENU

CLEAR

MIN MAX

OPTICAL

ANALOG REC LEVEL

INPUT

REC

COAXIAL

ANALOG

COPYCDRHDD

MIN MAX

LEVELPHONES

POWER

30°

Remote control sensor

Within 6m (20’)

E-6

PREPARATION

Connections

Turn off the power of this unit and the other components, and unplug them from the wall outlet before making any connections.

• Correctly connect the input and output jacks on this unit to the input and output jacks on the other components.

• Arrow marks (➞) in the illustration below indicate the direction of the audio signal.

■ Digital connections

• Remove the jack covers for the DIGITAL IN/OUT (OPTICAL) jacks before starting to make connections. Using the optical fiber cable,

connect the DIGITAL IN (OPTICAL) jack on this unit to the digital optical output jack on the other component, and the DIGITAL OUT

(OPTICAL) jack on this unit to the digital optical input jack on the other component.

• Keep the jack covers for future use. Replace them in order to protect the DIGITAL IN/OUT (OPTICAL) jacks from dust when the jacks

are not being used.

• When using the DIGITAL IN/OUT (COAXIAL) jacks, make connections with coaxial cables. Connect the DIGITAL IN (COAXIAL) jack

on this unit to the digital coaxial output jack on the other component, and the DIGITAL OUT (COAXIAL) jack on this unit to the digital

coaxial input jack on the other component.

■ Analog connections

• Make sure to connect the L (left) and R (right) input and output jacks on this unit to the correct L (left) and R (right) input and output jacks

on the other component.

• Connect the ANALOG LINE IN (REC) jack on this unit to the analog output jack on the other component, and the ANALOG LINE OUT

(PLAY) jack on this unit to the analog input jack on the other component.

• The ANALOG LINE IN (REC)/LINE OUT (PLAY) jacks on this unit are numbered # and $ respectively. Connect these jacks to the

jacks with the same numbers when connecting this unit to a Yamaha amplifier or receiver.

■ Plug in this unit to a wall outlet when all connections are complete.

Note

• When you play the data on the HDD or CDs, signals are output both from the ANALOG LINE OUT (PLAY) jack and from the DIGITAL

OUT (OPTICAL/COAXIAL) jacks.

RS–232C

DIGITAL

INLINE IN —LINE OUT

COAXIAL OPTICAL

OUT

COAXIAL OPTICAL

R

L

R

L

4 3

ANALOG

REC PLAY

REC

PLAY

OUT

IN

DIGITAL

INPUT

COAXIAL

DIGITAL

OUTPUT

R

L

R

L

OPTICAL

DIGITAL

OUTPUT

COAXIAL

ANALOG LINE IN (REC)/

LINE OUT (PLAY) jacks

* This connector is used for an

examination in the factory.

DIGITAL IN/OUT (OPTICAL) jacks

DIGITAL IN/OUT (COAXIAL) jacks Coaxial cable (optional)

RCA pin cable

(included)

RCA pin cable

(included)

Optical fiber cable

(one included)

To wall outlet

Amplifier or receiver DVD player or DAT deck

E-7

PREPARATION

English

1 POWER ............................................................................. P. 13

2 HDD

3 CDR

4 COPY ..................................................................... P. 23, 25, 27

5 Front panel display ......................................................... P. 9, 10

6 Disc tray

7 v

8 TRACK NO./BOOKMARK ....................................... P. 21, 36

9 TEXT/TIME ....................................................................... P. 10

0 COMPLETE

q MODE/SET

w MULTI JOG knob

e MENU

CONTROLS AND FUNCTIONS

Front Panel

r CLEAR

t PHONES jack ................................................................... P. 58

y PHONES LEVEL control ................................................. P. 58

u REC ............................................................................. P. 14, 16

i t/e

o FINALIZE .......................................................................... P. 19

p ERASE .............................................................................. P. 51

a r/y

s INPUT ................................................................................ P. 17

d w/d

f ANALOG REC LEVEL control ....................................... P. 18

g a

NATURAL SOUND HDD/CD RECORDER CDR–HD1000

TEXT/TIME MODE/SET

MULTI JOG

DIGITAL REC LEVEL

PUSH ENTER

TRACK NO.

FINALIZE ERASE

BOOKMARK

COMPLETE

MENU

CLEAR

MIN MAX

OPTICAL

ANALOG REC LEVEL

INPUT

REC

COAXIAL

ANALOG

COPYCDRHDD

MIN MAX

LEVELPHONES

POWER

1

ty uiopasdfg

23 4 5 6 7890q wer

E-8

CONTROLS AND FUNCTIONS

1 OPEN/CLOSE

2 COPY ..................................................................... P. 23, 25, 27

3 FINALIZE .......................................................................... P. 19

4 ERASE .............................................................................. P. 51

5 TEXT/TIME ....................................................................... P. 10

6 MODE/SET

7 COMPLETE

8 CLEAR

9 Alphabetical/numeric buttons ........................... P. 35, 45, 49, 54

0 REPEAT ...................................................................... P. 56, 57

q RANDOM .......................................................................... P. 56

w GROUP SKIP q

e t

r d

t e

y HDD

u REC ............................................................................. P. 14, 16

i TRACK NO. WRITE ......................................................... P. 21

o INPUT ................................................................................ P. 17

p MENU

a +/–

s ENTER

d BOOKMARK .................................................................... P. 36

f INTRO................................................................................ P. 57

g GROUP SKIP w

h y

j r

k w

l CDR

; a

Remote Control

OPEN/CLOSE

COPY REC

TEXT/TIME

INPUT

MODE/SET

MENU

CLEAR

1

ABC

2

DEF

3

GHI

4

JKL

5

MNO

6

PQR

7

STU

8

VWX

9

YZ

SPACE

SYMBOL

0

+

10

BOOKMARK

REPEAT RANDOM

GROUP SKIP

INTRO

ENTER

COMPLETE

FINALIZE ERASE

TRACK NO.

WRITE

HDD CDR

1

2

3

4

5

6

7

8

9

0

q

w

e

r

t

y

u

i

o

p

a

s

d

f

g

h

j

k

l

;

E-9

PREPARATION

English

CONTROLS AND FUNCTIONS

1 HDD mark

2 Information display

3 CDR mark

4 REC indicator

5 Playback mode/play style indicator ............................ P. 55—58

RNDM indicator

ALBM indicator

S indicator

G indicator

A indicator

REP indicator

6 DUPLCT indicator ............................................................ P. 27

7 BKMARK indicator ........................................................... P. 36

Display

RNDM

S

AUTO PRD DIG

REC

LEVEL

TRACK

GROUP

VAR

CD–RW

L

R

dB –30 –10 –6 –20

MULT ALL SYNC ANLG

ALBM

DUPLCT

REP BKMARKGA

8888888888888

TOC

1

567 8 9 0 qwer

234

8 Recording mode indicator ............................................ P. 20, 28

AUTO indicator

PRD indicator

MULT indicator

ALL indicator

SYNC indicator

9 Copying mode indicator ..................................................... P. 30

DIG indicator

ANLG indicator

0 Level meter ....................................................... P. 18, 19, 30, 51

q TOC indicator .............................................................. P. 19, 51

w CD-RW indicator ......................................................... P. 19, 51

e VAR indicator ............................................................... P. 18, 30

r MULTI JOG status indicator

LEVEL indicator

TRACK indicator

GROUP indicator

E-10

CONTROLS AND FUNCTIONS

Display Information

The display located in the center of this unit provides the

information about the drive (HDD or CDR drive) selected.

■ Display during playback

Each time TEXT/TIME is pressed, the display changes as follows:

Group number, track number and elapsed time of the

track being played

While playing the data on the HDD

While playing a CD

Group number, track number and remaining time of the

track being played

While playing the data on the HDD

While playing a CD

Group number and group total time

While playing the data on the HDD

While playing a CD

Group number and group remaining time

While playing the data on the HDD

While playing a CD

GROUP

L

R

dB –30 –10 –6 –20

Dsc001 1 004

GROUP

CD

L

R

dB –30 –10 –6 –20

1 004

TOC

GROUP

L

R

dB –30 –10 –6 –20

Dsc001 1- 221

GROUP

CD

L

R

dB –30 –10 –6 –20

1- 221

TOC

GROUP

CD

L

R

dB –30 –10 –6 –20

6545

TOC

GROUP

L

R

dB –30 –10 –6 –20

Dsc001 6545

L

R

dB –30 –10 –6 –20

Dsc001 -6240

GROUP

CD

L

R

dB –30 –10 –6 –20

-6240

TOC

Group title or track title

Group title (or CD TEXT)

Track title (or CD TEXT)

Notes

• The group title with the GROUP indicator and the track title with

the TRACK indicator are switched by rotating the MULTI JOG

knob.

• When the title and the name contain more than 13 characters, the

entire title is displayed as scrolled to the left. After the entire title

has scrolled, the first 13 characters are displayed.

■ Display during recording

Each time TEXT/TIME is pressed, the display changes as follows:

Disc number (while recording onto the HDD), track

number and elapsed time of the track being recorded

While recording onto the HDD

While recording onto a CD-R or CD-RW disc

Disc number (while recording onto the HDD) and total

recorded time on the disc

While recording onto the HDD

While recording onto a CD-R or CD-RW disc

Total recordable time on a disc (while recording onto a

CD-R or CD-RW disc)

GROUP

L

R

dB –30 –10 –6 –20

LIVE AT CARNE

L

R

dB –30 –10 –6 –20

PRIDE AND JOY

TRACK

L

R

dB –30 –10 –6 –20

Dsc001 1 004

REC

GROUP

CD-RW

L

R

dB –30 –10 –6 –20

1 004

REC

GROUP

CD–RW

L

R

dB –30 –10 –6 –20

1543

REC

GROUP

L

R

dB –30 –10 –6 –20

Dsc001 1543

REC

GROUP

CD–RW

L

R

dB –30 –10 –6 –20

- 221

E-11

PREPARATION

English

Rules of Digital Recording

■ SCMS—Serial Copy Management System

As a digital audio component, this unit conforms with the Serial

Copy Management System (SCMS) standards. The Serial Copy

Management System restricts copies made by recording digital

signals to first-generation copies only.

The digital program sources that have been recorded cannot be

digitally recorded again.

There are 2 rules as follows:

Rule 1

Digital sources such as commercially available CDs can be copied

digitally onto other recordable digital media with this unit (a first-

generation digital copy). However, the first-generation digital copy

cannot be copied digitally any further.

Rule 2

The source that was recorded via the ANALOG LINE IN (REC)

jacks can be copied digitally onto other recordable digital media (a

first-generation digital copy). However, the first-generation digital

copy cannot be copied digitally any further.

This unit monitors the SCMS status for each track when a digital

recording is made. If the track is protected from digital recording

and copying, it is not possible to make a digital recording and copy

of that track.

The SCMS standard does not apply to analog recording and

copying.

When making a copy from a CD onto the HDD, or from the HDD

onto a CD-R or CD-RW disc, any of the copy methods described

below can be selected. The following selections are contained in

“Copy Method”.

•“Auto Dig/Anlg”:

Automatically switches to analog recording if the track cannot be

digitally recorded for SCMS.

•“Digital Copy/Move”:

Performs recording of only those tracks that can be digitally

copied when recording from a CD onto the HDD. Switches to the

Digital Move method when recording from the HDD onto a CD-R

or CD-RW disc.

•“Analog Copy”:

Performs analog copying regardless of the SCMS standard.

■ Digital Move

This unit has a built-in HDD with large space that makes a long

recording possible. You can create your own CD by editing the

various program sources that have been recorded onto the HDD of

this unit and copying them onto a CD-R or CD-RW disc.

If you want to make a digital copy of the original data that has been

created on the HDD to a CD-R or CD-RW disc, the “Digital Move”

method is convenient. You can make a digital copy from the HDD

onto a CD-R or CD-RW disc even if the track is protected from

making a second-generation copy by the SCMS standard.

However, since the concept of “Digital Move” is that the data is

moved from the HDD onto a CD-R or CD-RW disc, the original

data on the HDD is erased when moving is complete. See page 30

for details.

RULES OF DIGITAL RECORDING AND NOTES ON SYSTEM

Notes on System

■ Number of recordable discs and tracks and their

length

• One CD-R or CD-RW disc, or one disc on the HDD can be

recorded with up to 99 tracks on them.

• Once 99 tracks have been recorded, no further recording is

possible even if space for recording is available on the disc.

• The minimum length of one track must be 4 seconds. If a

recording is stopped while the track is less than 4 seconds long,

this unit will record for 4 seconds, and then stop recording. The

maximum length of one track is 99 minutes 59 seconds for the

HDD.

• 999 discs can be created at maximum on the HDD of this unit.

However, the number of discs that can be created is limited

according to the space availability (total recordable time) on the

HDD. Total recordable time for the HDD is approximately 30

hours.

• The maximum length of one disc on the HDD is 99 minutes 59

seconds. However, since each track on the HDD is handled in the

unit of frame (75 frames are equal to one second), the maximum

length of one track or disc may vary slightly.

■ Source sampling rate conversion

• Digital input of this unit supports sampling frequencies of 32kHz,

44.1kHz, 48kHz, and 96kHz. This unit converts these inputs to

the 44.1kHz,16-bit digital signals and records them onto the

HDD, or a CD-R or CD-RW disc.

• Analog input is also converted to the same digital signal to be

recorded.

• This unit always produces the signals at the sampling frequency

of 44.1kHz, 16-bit from its digital output.

■ Recording of non-audio signals

• This unit is designed exclusively for recording audio signals.

Recording is only possible for audio signals.

• When a CD with CD TEXT is recorded onto the HDD, CD TEXT

will be automatically copied if it is not copy protected.

• If the digital signals contain graphic data such as CD graphics, the

non-audio signals will not be recorded.

• It is not possible to record from non-audio sources such as CD-

ROM or DVD.

■ Data processing

• A small amount of space may be used for data processing besides

recording the actual program sources.

• Although this unit is capable of recording 999 albums at

maximum onto the HDD, the data processing speed may slow

down if a large number of albums is created.

E-12

RULES OF DIGITAL RECORDING AND NOTES ON SYSTEM

■ Data on the HDD

The data recorded onto the built-in HDD of this unit will be

numbered and organized based on the following concept:

Disc

One consequent recording is counted and numbered as one unit of

disc. The HDD of this unit can record 999 discs at maximum.

(However, the number of discs to be created may be less than 999

for the space availability on the HDD.)

Track

99 tracks can be recorded onto a disc at maximum. (However the

number of discs tracks to be recorded may be less than 99 for the

space availability on the HDD.) One track must be 4 seconds at

shortest and 99 minutes 59 seconds at longest.

Album

A group of the source programs selected from different discs and

recorded as the playlist is called “album”. This unit can record 999

albums at maximum onto the HDD. See page 31 for details.

Bookmark

This unit can make a temporary bookmark on a favorite track as

playing back. The list of the program sources marked is called

“bookmark”. This marking is temporary and cannot be duplicated.

However, an album can be easily created by copying the

bookmarked tracks. See page 36 for details.

Group

A collection of tracks such as a disc, album, and bookmark is called

“group”. Any of the recorded discs, created albums, and marked

bookmarks can be selected as a group in the order by rotating the

MULTI JOG knob.

Disc 1

Track 1

Track 2

Track 3

Track 99

✓

Disc 2

Track 1

Track 2

Track 3

Track 99

✓

Disc 999

Track 1

Track 2

Track 3

Track 99

✓

Disc

1

2

Track

1

2

3

Disc

1

2

1

999

2

Track

1

2

3

99

Disc Track Bookmark Album

Example of the playlist

Example of the copied tracks

with bookmarks

* The tracks are listed in the

order of copying.

E-13

RECORDING AND

COPYING

English

Usable Recording Media

The media used for recording and copying with this unit are the

hard disk drive (HDD) or a compact disc for recording (a CD-R or

CD-RW disc). Choose whichever suits your needs.

HDD is convenient to make a long recording, and to edit the

recorded tracks afterwards.

A CD-R and CD-RW disc can be used to make an original CD that

another CD player can play.

Types of Recording and Copying

5 types of recording and copying are possible with this unit as

follows:

• Recording from an external component onto the HDD

➞ See page 14.

• Recording from an external component onto a CD-R or CD-RW

disc

➞ See page 15.

• Copying from a CD onto the HDD

➞ See page 22.

• Copying from the HDD onto a CD-R or CD-RW disc

➞ See page 24.

• Duplication of a CD

➞ See page 26.

Note

• When a CD with CD TEXT is recorded from an external CD

player, CD TEXT cannot be copied even if it is not copy

protected. To copy CD TEXT, copy a CD onto the HDD following

the steps for “Copying from a CD onto the HDD” on pages 22—

23.

RECORDING AND COPYING

Before Starting to Record and Copy

1. Turn on the power of this unit by pressing POWER on

the front panel.

The message “WELCOME TO YAMAHA HDD/CD

SYSTEM” appears on the display. After the message is

displayed, this unit is ready for operation.

2. Select the recording medium.

Press HDD when recording onto the HDD, and CDR when

recording onto a CD-R or CD-RW disc.

NATURAL SOUND HDD/CD RECORDER CDR–HD1000

REC

COPYCDRHDD

MIN MAX

LEVELPHONES

POWER

12

GROUP SKIP

HDD CDR

2

E-14

This section describes the basic recording operation. The operation steps are explained by using the buttons on the front panel and the remote

control.

Recording from an External Component onto the HDD

BASIC RECORDING OPERATION

1. Press REC.

The HDD mark flashes, and the disc and track numbers to be

recorded are indicated on the display. Recording has not been

started yet at this stage. (Recording pause mode)

2. Select the input source to be recorded.

Press INPUT to select the input source from among

OPTICAL, COAXIAL, and ANALOG. See page 17 for

details.

3. Adjust the recording level.

The recording level can be adjusted for both digital and analog

input. See page 17 for details.

4. Select the disc to be recorded.

See page 20 for details.

5. Select the recording mode.

See page 20 for details.

6. Start recording.

Press w/d (w or d on the remote control) to start recording.

Note

• In the multi-synchronized or all-synchronized recording

mode, this unit automatically starts recording when the

source component starts playback.

NATURAL SOUND HDD/CD RECORDER CDR–HD1000

TEXT/TIME MODE/SET

MULTI JOG

DIGITAL REC LEVEL

PUSH ENTER

TRACK NO.

FINALIZE ERASE

BOOKMARK

COMPLETE

MENU

CLEAR

MIN MAX

OPTICAL

ANALOG REC LEVEL

INPUT

REC

COAXIAL

ANALOG

COPYCDRHDD

MIN MAX

LEVELPHONES

POWER

6, 8

12

9

OPEN/CLOSE

COPY REC

TEXT/TIME

INPUT

MODE/SET

MENU

CLEAR

1

ABC

2

DEF

3

GHI

4

JKL

5

MNO

6

PQR

7

STU

8

VWX

9

YZ

SPACE

SYMBOL

0 +10

BOOKMARK

REPEAT RANDOM INTRO

ENTER

COMPLETE

FINALIZE ERASE

TRACK NO.

WRITE

7

STU

8

VWX

9

YZ

SPACE

SYMBOL

0 +10

BOOKMARK

REPEAT RANDOM

GROUP SKIP

INTRO

HDD CDR

1

2

6, 8

9

Disc number to be recorded Track number to be recorded

REC

L

R

dB –30 –10 –6 –20

Dsc002 1 000

GROUP

REC

L

R

dB –30 –10 –6 –20

Dsc002 1 001

GROUP

7. Start playing the source.

8. Press w/d (d on the remote control) to stop recording

temporarily.

The HDD mark flashes and the track number is advanced to the

next.

Press w/d (w or d on the remote control) to resume recording.

9. Press a to stop recording.

The first track number of the disc at which recording has been

stopped is indicated on the display.

IMPORTANT

• Never turn off the power of this unit during recording.

Recording may not be correctly made, or the data on the HDD

may be damaged.

• During recording, make sure that this unit is not subjected to

shock or vibration as the HDD may be damaged.

L

R

dB –30 –10 –6 –20

G

Dsc002 1

GROUP

E-15

RECORDING AND

COPYING

English

BASIC RECORDING OPERATION

1. Press v (OPEN/CLOSE on the remote control) to

open the disc tray.

2. Load a new CD-R or CD-RW disc, or a CD-R or CD-

RW disc without finalization on the disc tray.

Place the CD-R or CD-RW disc correctly aligned in the

recessed area of the disc tray with its recordable side facing

down.

3. Press v (OPEN/CLOSE on the remote control) to

close the disc tray.

Note

• The disc tray can be also closed by pressing the front edge of

the disc tray gently. If a CD-R or CD-RW disc without

finalization has been loaded, this unit starts playback of that

CD-R or CD-RW disc. Press a to stop playback.

This unit starts reading the disc information (type and capacity

of the disc) when the disc has been loaded. It takes

approximately 10 to 15 seconds to complete the reading.

The following message appears on the display during the

reading.

Recording from an External Component onto a CD-R or CD-RW Disc

NATURAL SOUND HDD/CD RECORDER CDR–HD1000

TEXT/TIME MODE/SET

MULTI JOG

DIGITAL REC LEVEL

PUSH ENTER

TRACK NO.

FINALIZE ERASE

BOOKMARK

COMPLETE

MENU

CLEAR

MIN MAX

OPTICAL

ANALOG REC LEVEL

INPUT

REC

COAXIAL

ANALOG

COPYCDRHDD

MIN MAX

LEVELPHONES

POWER

2 1, 3

OPEN/CLOSE

COPY REC

TEXT/TIME

INPUT

MODE/SET

MENU

CLEAR ENTER

COMPLETE

FINALIZE ERASE

TRACK NO.

WRITE

1, 3

GROUP

L

R

dB –30 –10 –6 –20

Reading

When reading the disc information has been completed, the

display changes as follows and this unit becomes ready for

operation.

■ When a CD-R or CD-RW disc without finalization is

loaded

■ When a new CD-R or CD-RW disc is loaded

GROUP

L

R

dB –30 –10 –6 –20

14 6817

CD–RW

GROUP

L

R

dB –30 –10 –6 –20

1

CD–RW

Number of recorded tracks Total recorded time

GROUP

L

R

dB –30 –10 –6 –20

New Disc

CD–R

GROUP

L

R

dB –30 –10 –6 –20

0

CD–R

E-16

BASIC RECORDING OPERATION

1. Press REC.

This unit automatically adjusts the laser strength against the

disc reflection for optimal recording. This process is called

OPC (Optimum Power Calibration) and takes approximately 15

seconds to complete.

The following message appears on the display.

If this unit determines that OPC is not needed for the disc

loaded, “Standby” flashes on the display.

The CDR mark starts flashing in a few seconds, and the track

number is indicated on the display. Recording has not been

started yet at this stage. (Recording pause mode)

Note

• Before starting to record, check the remaining time available

for recording on the CD-R or CD-RW disc. (See page 10.)

2. Select the input source to be recorded.

Press INPUT to select the input source to be recorded from

among OPTICAL, COAXIAL and ANALOG. See page 17 for

details.

3. Adjust the recording level.

The recording level can be adjusted for both digital and analog

input. See page 17 for details.

4. Select the recording mode.

See page 20 for details.

5. Start recording.

Press w/d (w or d on the remote control) to start recording.

Note

• In the multi-synchronized, all-synchronized, or full auto-

synchronized recording mode, this unit automatically starts

recording when the source component starts playback.

6. Start playing the source.

7. Press w/d (d on the remote control) to stop recording

temporarily.

“Wait” flashes on the display. The CDR mark starts flashing in

a few seconds and the track number is advanced to the next.

Press w/d (w or d on the remote control) to resume recording.

8. Press a to stop recording.

“Wait” flashes on the display. The number of recorded tracks

and the total recorded time are indicated on the display in a few

seconds, and then the first track number of the recorded tracks

is indicated on the display in a few seconds.

NATURAL SOUND HDD/CD RECORDER CDR–HD1000

TEXT/TIME MODE/SET

MULTI JOG

DIGITAL REC LEVEL

PUSH ENTER

TRACK NO.

FINALIZE ERASE

BOOKMARK

COMPLETE

MENU

CLEAR

MIN MAX

OPTICAL

ANALOG REC LEVEL

INPUT

REC

COAXIAL

ANALOG

COPYCDRHDD

MIN MAX

LEVELPHONES

POWER

5, 7

12

8

OPEN/CLOSE

COPY REC

TEXT/TIME

INPUT

MODE/SET

MENU

CLEAR

1

ABC

2

DEF

3

GHI

4

JKL

5

MNO

6

PQR

7

STU

8

VWX

9

YZ

SPACE

SYMBOL

0 +10

BOOKMARK

REPEAT RANDOM INTRO

ENTER

COMPLETE

FINALIZE ERASE

TRACK NO.

WRITE

7

STU

8

VWX

9

YZ

SPACE

SYMBOL

0 +10

BOOKMARK

REPEAT RANDOM

GROUP SKIP

INTRO

HDD CDR

1

2

5, 7

8

REC

GROUP

L

R

dB –30 –10 –6 –20

OPC Adjust

CD–RW

REC

L

R

dB –30 –10 –6 –20

Standby

CD–RW

REC

L

R

dB –30 –10 –6 –20

1 000

CD–RW

REC

L

R

dB –30 –10 –6 –20

1 001

CD–RW

REC

L

R

dB –30 –10 –6 –20

Wait

CD–RW

GROUP

L

R

dB –30 –10 –6 –20

1

CD–RW

GROUP

L

R

dB –30 –10 –6 –20

14 6817

CD–RW

E-17

RECORDING AND

COPYING

English

BASIC RECORDING OPERATION

9. Perform finalization when all recordings have been

completed.

See page 19 for the finalization procedure.

IMPORTANT

• Never turn off the power of this unit during recording.

Recording may not be correctly made, or the CD-R or CD-RW

disc may be damaged.

• If the power of this unit is turned off during recording on a

CD-R disc, recording may become impossible or the CD-R

disc may not be played back normally because information is

not written in the PMA (Program Memory Area).

• During recording, make sure that this unit is not subjected to

shock or vibration as it may cause skips or jumps to be

included in the recording.

Selecting an Input Source

Press INPUT to select the appropriate input source to be used for

recording from among OPTICAL (optical digital input),

COAXIAL (coaxial digital input), and ANALOG (analog input).

• Press INPUT to light OPTICAL when recording the source input

to the DIGITAL IN (OPTICAL) jack.

• Press INPUT to light COAXIAL when recording the source input

to the DIGITAL IN (COAXIAL) jack.

• Press INPUT to light ANALOG when recording the source input

to the ANALOG LINE IN (REC) jacks.

Note

• This selection of the input source must be made while this unit is

in the recording pause mode.

E

R CDR–HD1000

TEXT/TIME MODE/SET

MULTI JOG

DIGITAL REC LEVEL

PUSH ENTER

TRACK NO.

FINALIZE ERASE

BOOKMARK

COMPLETE

MENU

CLEAR

MIN MAX

OPTICAL

ANALOG REC LEVEL

INPUT

REC

COAXIAL

ANALOG

COPY

INPUT

OPEN/CLOSE

COPY REC

TEXT/TIME

INPUT

MODE/SET

MENU

CLEAR ENTER

COMPLETE

FINALIZE ERASE

TRACK NO.

WRITE

INPUT

Adjusting the Recording Level

There is an adjusting procedure for each input source to be recorded

as explained below. Choose the one for your input source and

follow the steps.

■ When recording a digital input source

The digital recording level is set to 0dB, the level of the input

source, as an initial setting. Further adjustment is not normally

necessary. However it is possible to adjust the recording level to suit

your needs.

1. Press MENU while this unit is in the recording pause

mode.

The following message appears on the display.

2. Play the loudest passage (highest sound level) of the

source to be recorded.

E

R CDR–HD1000

TEXT/TIME MODE/SET

MULTI JOG

DIGITAL REC LEVEL

PUSH ENTER

TRACK NO.

FINALIZE ERASE

BOOKMARK

COMPLETE

MENU

CLEAR

MIN MAX

OPTICAL

ANALOG REC LEVEL

INPUT

REC

COAXIAL

ANALOG

COPY

3, 4 1

OPEN/CLOSE

COPY REC

TEXT/TIME

INPUT

MODE/SET

MENU

CLEAR

1

ABC

2

DEF

3

GHI

4

JKL

5

MNO

6

PQR

7

STU

8

VWX

9

YZ

SPACE

SYMBOL

0 +10

BOOKMARK

REPEAT RANDOM INTRO

ENTER

COMPLETE

FINALIZE ERASE

TRACK NO.

WRITE

1

3

4

REC

LEVEL

L

R

dB –30 –10 –6 –20

Level 0.0dB

E-18

BASIC RECORDING OPERATION

3. Rotate the MULTI JOG knob (press +/– on the remote

control) to adjust the recording level.

Adjustment is possible in the –12dB to +12dB range by 0.4dB

steps. When the level is set to a value other than 0dB, the VAR

indicator lights on the display.

Adjust the recording level so that the red part on the peak level

meter does not light at the loudest sound levels.

4. Press the MULTI JOG knob (ENTER on the remote

control) to return to the previous display.

Notes

• The recording level can be adjusted while this unit is in either

the recording or recording pause mode. Once recording has

been stopped, the recording level is reset to 0dB.

• Adjustment of the recording level can be canceled by

pressing MENU when the level is adjusted in the recording

pause mode.

• The recording level is set to 0dB by pressing CLEAR when

the level is adjusted in the recording pause mode.

GROUP

VAR

CD–RW

L

R

dB –30 –10 –6 –20

GROUP

VAR

CD–RW

L

R

dB –30 –10 –6 –20

■ When recording an analog input source

1. Play the loudest passage (highest sound level) of the

source to be recorded.

2. Adjust the recording level by rotating the ANALOG

REC LEVEL control.

Rotate the control clockwise to increase the level and

counterclockwise to decrease the level.

Adjust the recording level so that the red part on the peak level

meter does not light at the loudest sound levels.

Note

• The recording level can be adjusted while this unit is in either

the recording or recording pause mode.

E

R CDR–HD1000

TEXT/TIME MODE/SET

MULTI JOG

DIGITAL REC LEVEL

PUSH ENTER

TRACK NO.

FINALIZE ERASE

BOOKMARK

COMPLETE

MENU

CLEAR

MIN MAX

OPTICAL

ANALOG REC LEVEL

INPUT

REC

COAXIAL

ANALOG

COPY

2

Pagina se încarcă...

Yamaha CDR-HD1000 Manualul proprietarului

Yamaha CDR-HD1000 Manualul proprietarului

în alte limbi

Lucrări înrudite

Alte documente