Philips SC2006 Manual de utilizare

User manual

SC2008

SC2006

5

SC2008, SC2006

ENGLISH 6

ČEŠTINA 31

POLSKI 56

ROMÂNĂ 84

SLOVENŠČINA 112

6

Table of contents

Introduction 7

Benets 7

Intense Pulsed Light (IPL) technology for home use 7

Effective hair regrowth prevention for everyday smoothness 7

Gentle treatment, even on sensitive body areas 8

Cordless operation for maximum freedom and exibility 8

Long-lasting battery for complete body and face treatment 8

No replacement parts needed, no hidden costs 8

How Philips’ Intense Pulsed Light technology works 8

Hair growth 8

Working principle 8

General description 9

Important 10

Danger 10

Warning 10

To prevent damage 10

Caution 11

Keep the following things in mind to avoid compromising the

lifetime of your Philips Lumea Precision Plus: 11

For whom is Philips Lumea Precision Plus NOT suitable? 11

Contraindications 11

Never use the appliance if you are pregnant or breast feeding. 11

Never use the appliance if you have an unsuitable skin and/or

hair colour, i.e.: 11

Never use the appliance if you suffer from any of the diseases

listed below, i.e.: 11

Never use the appliance if you take any of the medications

listed below, i.e.: 12

Never use the appliance on the following areas: 12

Never use the appliance on sunburnt, recently tanned

(last 48 hours) or fake-tanned skin: 12

Electromagnetic elds (EMF) 13

Charging 13

Preparing for use 13

Preparing treatment areas 13

Setting the light intensity 14

Recommended light intensities (1-5) 15

Important 15

Tanning advice 15

Using the appliance 16

Choosing the right attachment 16

First use and skin test 17

Subsequent use 17

Guidelines for treatment 19

Average treatment time 19

Intended treatment areas 20

Using the appliance on the legs 20

Tip: White eye pencil 21

Using the appliance in the bikini area 21

Using the appliance on the underarms 21

Using the appliance on the face (upper lip, chin, sideburns) 22

ENGLISH

How to achieve optimal results 22

Maintenance phase 22

Possible side effects and skin reactions 22

After use 23

Cleaning and maintenance 23

Storage 24

Environment 24

Removing the rechargeable batteries 25

Guarantee and support 26

Technical specications 26

Troubleshooting 27

Introduction

Congratulations on your purchase and welcome to Philips!

To fully benet from the support that Philips offers, register your product

at www.philips.com/welcome.

Light-based hair removal is one of the most effective methods to

treat unwanted body hair with longer-lasting results. It is different from

current home hair removal methods because it signicantly reduces

hair regrowth. Philips has been investigating this method together with

leading dermatologists for over 10 years. You can now use this innovative

technology comfortably in the privacy of your own home, whenever and

wherever you want.

This appliance has been specically designed and optimised for use by

women, but can be used by men as well.

Philips Lumea Precision Plus enables treatment of unwanted hair on the

whole body, including the face (upper lip, chin and sideburns), using three

tailored attachments.

Philips Lumea Precision Plus is designed for use by one person only.

For more information about Philips Lumea Precision Plus and movies about

how to use Lumea, see www.philips.com/lumea. Check our homepage

regularly for updates.

Benets

This appliance provides the following benets:

Intense Pulsed Light (IPL) technology for home use

Philips Lumea Precision Plus uses a light-based technology called ‘Intense

Pulsed Light’ (IPL). IPL is also used in the professional beauty market for

hair removal and has been in use for the last fteen years. Philips Lumea

Precision Plus now brings you this innovative technology for safe and

effective use in the comfort of your home.

Effective hair regrowth prevention for everyday smoothness

This method provides you with long-lasting hair regrowth prevention and

silky-smooth skin. Our studies have shown a signicant hair reduction

already after two treatments. Optimal results were generally achieved after

four to ve treatments. A reduction in hair density is visible from treatment

to treatment. How fast the effect becomes visible and how long the results

last varies from person to person. For more information, see section ‘How

to achieve optimal results’ in chapter ‘Using the appliance’.

ENGLISH 7

Gentle treatment, even on sensitive body areas

Philips Lumea Precision Plus has been developed in close cooperation with

leading dermatologists and has been tested by over 2000 women for an

effective and gentle treatment, even on the most sensitive body areas and

the face.

Cordless operation for maximum freedom and exibility

Because the appliance runs on rechargeable batteries, it is portable and can

be used anywhere.

Long-lasting battery for complete body and face treatment

A fully charged battery provides a complete body and face treatment

(upper lip, underarms, bikini line and lower legs) in one go, without

recharging breaks.*

*Based on the average treatment times for each area and the

recommended intensities for one user.

No replacement parts needed, no hidden costs

Philips Lumea Precision Plus is equipped with a high-performance lamp

which does not require replacement. This lamp can generate over

140,000 ashes and should enable you to continuously maintain results for

more than 5 years* while saving money on expensive replacement lamps.

*Based on the average treatment times for each area and the

recommended intensities for one user.

How Philips’ Intense Pulsed Light technology works

Hair growth

Hair growth rates differ from person to person, depending on age,

metabolism and other factors. However, everyone’s hair normally grows in

3 phases.

1 Growing phase (anagen phase)

The hair grows actively from the root. In this phase the concentration of

melanin is highest. Melanin is responsible for the pigmentation of the hair.

Melanin concentration is also the determining factor for the efcacy of this

method. Only hairs in the growing phase are susceptible to treatment with

light.

2 Degradation phase (catagen phase)

Hair growth stops and the root shrinks before the hair sheds.

3 Resting phase (telogen phase)

The old hair separates from its hair follicle and sheds. The follicle remains

at rest until the biological clock tells it to become active again and grow a

new hair.

Working principle

- The appliance works by heating up the hair and root beneath the skin.

The melanin in the hair and hair root absorbs the released light pulses.

The darker the colour of the hair, the more light can be absorbed. This

process stimulates the hair to go into the resting phase.

ENGLISH8

- In between treatments, hair sheds naturally and regrowth is inhibited.

Hairs can take one or two weeks to shed.

- Optimal hair removal cannot be obtained with a single session, since

only hairs in the growing phase are susceptible to treatment with light.

During a treatment, hairs on the treated area are usually in different

stages of the hair growth cycle. To effectively treat all hairs you have to

repeat the treatment every two weeks for a few times.

An integrated optical lter ensures that no UV light reaches the skin

and guarantees that the appliance is safe for the skin.

General description (Fig. 5)

1 Light exit window with integrated UV lter

2 Attachments

A Facial attachment: suitable for all body areas, including upper lip,

chin and sideburns

B Body attachment: suitable for all body areas below the neck

C Bikini area attachment (SC2008 only): suitable for the bikini area

3 Metallic frame inside the attachment

4 Safety system (safety ring with contact switches)

5 Flash button

6 Intensity lights (1- 5)

7 % Intensity increase button

8 ^ Intensity decrease button

9 Charging light and battery low indication

10 On/off button

11 Appliance socket

12 ’Ready to ash’ light

13 Air vents

14 Adapter

15 Small plug

ENGLISH 9

Important

Read this user manual carefully before you use the appliance and save it for

future reference.

Danger

- Water and electricity are a dangerous combination. Do not use this

appliance in wet surroundings (e.g. near a lled bath, a running shower

or a lled swimming pool).

- Keep the appliance and the adapter dry.

- If the appliance is broken, do not touch any inner part to avoid electric

shock.

- Never insert any objects into the appliance.

Warning

- This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, unless they have

been given supervision or instruction concerning use of the appliance

by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the

appliance.

- The appliance is not intended for children under the age of 15 years.

Teenagers aged between 15 and 18 years can use the appliance with

the consent and/or assistance of their parents or the persons who have

parental authority over them. Adults from 19 years and older can use

the appliance freely.

- Only charge the appliance with the adapter supplied.

- Do not use the appliance or the adapter if it is damaged.

- The adapter contains a transformer. Do not cut off the adapter to

replace it with another plug, as this causes a hazardous situation.

- If the adapter is damaged, always have it replaced with one of the

original type in order to avoid a hazard.

- Do not use the appliance if the UV lter of the light exit window is broken.

- Do not use the facial attachment or the bikini area attachment

(SC2008 only) if its lter is broken.

To prevent damage

- Make sure nothing obstructs the air ow through the ventilation slots.

- Never subject the appliance to heavy shocks and do not shake or drop it.

- If you take the appliance from a very cold environment to a very warm

environment or vice versa, wait approximately 3 hours before you use it.

- Store the appliance in a dust-free place to prevent it from becoming dusty.

- Never leave the appliance unattended when it is switched on. Always

switch off the appliance after use.

- Do not expose the appliance to direct sunlight or UV light for several

hours.

- Do not ash against any other surface than the skin. This can cause

severe damage to the attachments and/or the light exit window.

Only ash when the appliance is in contact with skin.

ENGLISH10

Caution

- Never use the appliance around the eyes and near the eyebrows to

avoid the risk of eye damage.

- Use this appliance only at settings suitable for your skin type. Use at

higher settings than those recommended can increase the risk of skin

reactions and side effects.

- This appliance is only intended for removing unwanted body hair from

areas below the cheek bones with the attachments supplied. Do not

use it for any other purpose.

Keep the following things in mind to avoid compromising the

lifetime of your Philips Lumea Precision Plus:

- Do not expose the appliance to temperatures lower than 15°C or

higher than 35°C during use.

- The appliance is equipped with a built-in overheat protection. If the

appliance overheats, it does not ash. Do not switch off the appliance,

but let it cool down for approx. 15 minutes before you continue with

your treatment.

- Always return the appliance to a service centre authorised by Philips

for examination or repair. Repair by unqualied people could cause an

extremely hazardous situation for the user.

- Never use the appliance in any of the cases mentioned in the section

‘Contraindications’.

For whom is Philips Lumea Precision Plus NOT suitable?

Philips Lumea Precision Plus is not designed for everyone. If any of the

following is true for you, then this appliance is not suitable for you to use!

Contraindications

Never use the appliance if you are pregnant or breast feeding.

Never use the appliance if you have an unsuitable skin and/or

hair colour, i.e.:

- If your natural hair colour in the treatment areas is light blond, white,

grey or red.

- If you are of skin type VI (you rarely or never get sunburnt and you tan

very darkly; your skin colour is brownish black or darker). In this case

you run a high risk of developing skin reactions, such as discolourations,

strong redness or burns, when you use Philips Lumea Precision Plus.

See also chapter ‘Using the appliance’, section ‘Possible side effects and

skin reactions’.

Never use the appliance if you suffer from any of the diseases

listed below, i.e.:

- If you have a skin disease such as active skin cancer, you have a history

of skin cancer or any other localised cancer in the areas to be treated.

- If you have pre-cancerous lesions or multiple atypical moles in the areas

to be treated.

- If you have a history of collagen disorder, including a history of keloid

scar formation or a history of poor wound healing.

- If you have a history of vascular disorder, such as the presence of

varicose veins or vascular ectasia in the areas to be treated.

- If your skin is sensitive to light and easily develops a rash or an allergic

reaction.

ENGLISH 11

- If you have infections, eczema, burns, inammation of hair follicles,

open lacerations, abrasions, herpes simplex, wounds or lesions and

haematomas in the areas to be treated.

- If you have had surgery in the areas to be treated.

- If you have epilepsy with ashlight sensitivity.

- If you have diabetes, lupus erythematodes, porphyria or congestive

heart disease.

- If you have any bleeding disorder.

- If you have a history of immunosuppressive disease (including HIV

infection or AIDS).

Never use the appliance if you take any of the medications

listed below, i.e.:

- If your skin is currently being treated with or has recently been treated

with Alpha-Hydroxy Acids (AHAs), Beta- Hydroxy Acids (BHAs),

topical isotretinoin and azelaic acid.

- If you have taken any form of isotretinoin Accutane

®

or Roaccutane

®

in

the last six months.This treatment can make skin more susceptible to

tears, wounds and irritations.

- If you are on painkillers, which reduce the skin’s sensitivity to heat.

- If you are taking photosensitising agents or medications, check the

package insert of your medicine and never use the appliance if it is

stated that it can cause photo-allergic reactions, photo-toxic reactions

or if you have to avoid sun when taking this medicine.

- If you take anticoagulation medications, including heavy use of aspirin, in

a manner which does not allow for a minimum 1-week washout period

prior to each treatment.

- If you take immunosuppressive medications.

Never use the appliance on the following areas:

- Around the eyes and near the eyebrows.

- On nipples, areolas, labia minora, vagina, anus and the inside of the

nostrils and ears.

- Men must not use it on the scrotum and face.

- Over or near anything articial like silicone implants, pacemakers,

subcutaneous injection ports (insulin dispenser) or piercings.

- On moles, freckles, large veins, darker pigmented areas, scars, skin

anomalies without consulting your doctor. This can result in a burn and

a change in skin colour, which makes it potentially harder to identify

skin-related diseases (e.g. skin cancer).

- On warts, tattoos or permanent make-up. This can result in a burn and

a change in skin colour (hypopigmentation or hyperpigmentation).

- On areas, where you use long-lasting deodorants. This can result in skin

reactions. See chapter ‘Using the appliance’, section ‘Possible side effects

and skin reactions’.

Never use the appliance on sunburnt, recently tanned

(last 48 hours) or fake-tanned skin:

- All types of tanning can inuence the safety of the treatment. This applies

to exposure to natural sunlight as well as articial tanning methods,

such as tanning lotions, tanning appliances etc. If you are tanned or are

planning to tan, see chapter ‘Preparing for use’, section ‘Tanning advice’.

Note: This list is not exhaustive. If you are not sure whether you can use the

appliance we advise you to consult a doctor.

ENGLISH12

Electromagnetic elds (EMF)

This Philips appliance complies with all applicable standards and regulations

regarding exposure to electromagnetic elds.

Charging

Fully charge the batteries before you use the appliance for the rst time

and when the batteries are empty. Fully charging the batteries takes up to

1 hour and 40 minutes.

Charge the appliance when the charging light lights up orange during use

to indicate that the battery is low and will run out soon.

Fully charged batteries provide at least 370 ashes at light intensity 5.

Fully charge the appliance every 3 to 4 months, even if you do not use

the appliance for a longer time.

Charge the appliance in the following way:

1 Switch off the appliance.

2 Insert the small plug into the appliance and put the adapter in the

wall socket.

, The charging light ashes green to indicate that the appliance is

charging.

, When the batteries are fully charged, the charging light

lights up green continuously.

Notes:

- The adapter and the appliance feel warm during charging. This is

normal.

- You cannot use the appliance during charging.

- This appliance is equipped with battery-overheat protection and does

not charge if the room temperature exceeds 40°C.

Never cover the appliance and adapter during charging.

3 After charging, remove the adapter from the wall socket and pull the

small plug out of the appliance.

Preparing for use

For optimal results and greatest effect, prepare the areas on which you

intend to use the appliance in the manner described below.

Preparing treatment areas

1 Shave the areas you intend to treat as long as you still experience

hair regrowth.

Note: If your last depilation method involved removing hairs by the roots

(e.g epilating, waxing etc.), wait until you notice signicant hair regrowth

before you use Philips Lumea Precision Plus. Do not use depilatory creams

instead of shaving.

ENGLISH 13

Please note that treatment on unshaved or improperly shaved

areas has a number of undesired effects:

- The light exit window and attachment may become contaminated with

stray hairs and dirt. A contaminated light exit window and attachment

can reduce the life and efcacy of the appliance. In addition, burns or

black spots that appear on the light exit window and attachments due

to contamination can cause the treatment to become painful or cause

skin reactions like redness and discolouration.

- Hairs on your skin can burn, which can result in an unpleasant smell.

2 Clean your skin and make sure it is hair-free, entirely dry and

free from oily substances (e.g. present in cosmetic products like

deodorants, lotions, perfumes, tanning creams and sunscreens).

3 Check the appliance, especially the light exit window and attachment,

for trapped hair, dust and bres. If you see any contamination, clean

the appliance according to the instructions in chapter ‘Cleaning and

maintenance’.

Notes:

- If shaving causes wounds or lesions, your skin may be more sensitive

and the light treatment may sometimes feel uncomfortable.

- Once the hairs stop growing back, which usually happens after 4-5

treatments, you no longer have to shave before you use the appliance.

Setting the light intensity

Philips Lumea Precision Plus is an appliance developed for consumer use at

home and therefore not comparable with professional light-based appliances

with respect to pain sensation. The pulses of light delivered by Philips Lumea

Precision Plus are gentler than those from professional appliances and

therefore you can expect a convenient and effective treatment.

You have to adjust the light intensity to your skin and body hair colour and

to a level you nd comfortable.

The recommended light intensities table below helps you to establish the

right light intensity

1

Consult the table below to determine which light intensities are most

suitable for your skin and body hair colour and to check if this method

is suitable for you (if it is not, this is indicated with x in the table).

2 Each body area and possibly even parts of a body area may require a

separate appropriate light intensity according to the recommended

light intensities table below. The method is more effective at higher

intensities, but you should reduce the light intensity if you experience

any pain or discomfort.

Note: The required light intensity for different body areas may vary due to

different skin colours. For example, the skin of the lower legs can be darker

than the skin of the underarms due to more sun exposure.

Persons with darker skin run a higher risk of skin irritation because their

skin absorbs more light. Therefore lower intensities are recommended

for persons with darker skin.

The light pulse can feel warm or hot on the skin but should never be

painful. To prevent skin reactions, see chapter ‘Using the appliance’,

section ‘Possible side effects and skin reactions’.

ENGLISH14

Recommended light intensities (1-5)

In the table below, ‘x’means that the appliance is not suitable for you.

Skin colour and

characteristics:

White

(always

sunburn,

no

tanning)

Beige

(easy

sunburn,

minimal

tanning)

Light brown

(sometimes

sunburn, good

tanning)

Mid

brown

(rarely

sunburn,

fast and

good

tanning)

Dark

brown

(rarely

sunburn,

very good

tanning)

Brownish

black and

darker (rarely

to never

sunburn, very

dark tanning)

Body hair colour:

dark blond/light

brown/brown/

dark brown/black

4/5 4/5 4/5 3/4 1/2/3 x

white/grey/red/

light blond

x x x x x x

Important

To check whether Philips Lumea Precision Plus is suitable for you, see

section ‘For whom is Philips Lumea Precision Plus not suitable?’.

If your skin has been exposed to natural sunlight or an articial tanning

method, it may be darker than during the previous treatment. Check the

table above to determine which settings are suitable for your skin colour.

Tanning advice

Sun exposure before treatment

- If your skin is tanned, perform a skin test (see chapter ‘Using the

appliance’, section ‘First use’) on the area to be treated to determine

the appropriate light intensity. A failure to do so causes a risk of

developing skin reactions after treatment with Philips Lumea Precision

Plus.

- Wait at least 48 hours after sunbathing before you use the appliance.

Sunbathing can cause skin to darken (tan) and/or can cause sunburn

(reddening of the skin).

- After these 48 hours, check the skin for any remaining sunburn. Do not

use Philips Lumea Precision Plus as long as sunburn persists.

- When the sunburn has disappeared, perform a skin test (see chapter

‘Using the appliance’, section ‘First use’) on the area to be treated to

determine the appropriate light intensity.

Sun exposure after treatment

- Wait at least 24 hours after treatment before you expose treated

areas to the sun. Even after 24 hours, make sure that the treated skin

does not show any redness from the treatment anymore before you

expose it to the sun.

- Cover treated areas when you go out into the sun or use a sunblock

(SPF 30+) in the two weeks after treatment.

- Exposing treated areas to sunlight without protection immediately

after treatment can increase the risk of adverse side effects and skin

reactions. See chapter ‘Using the appliance’, section ‘Possible side effects

and skin reactions’.

ENGLISH 15

Tanning with articial light

- Follow the instructions in ‘Sun exposure before treatment’ and

‘Sun exposure after treatment’ above.

Tanning with creams

- If you have used an articial tanning lotion, wait until the articial tan

has fully disappeared before you use Philips Lumea Precision Plus.

Note: For more details on unwanted skin reactions, see chapter ‘Using the

appliance’, section ‘Possible side effects and skin reactions’.

Using the appliance

Check the recommended light intensities table in chapter ‘Preparing for

use’, section ‘Setting the light intensity’ to determine which light intensities

are most suitable for your skin and body hair colour. Use the appliance in

a well-lit room; this reduces the perceived brightness of the ash. Shave

the area you intend to treat before you use the appliance (see chapter

‘Preparing for use’, section ‘Preparing treatment areas’).

If the treatment becomes intolerably painful at any point in time, reduce

the light intensity setting until the treatment is comfortable again. If you

notice skin reactions stronger than slight redness, stop the treatment

immediately and read section ‘Possible side effects and skin reactions’ in

this chapter.

Choosing the right attachment

- Body attachment

The body attachment can be used to treat unwanted body hair on all

body areas below the neck (for exceptions, see chapter ‘Important’, section

‘Contraindications’). The body attachment can cover an area of 4cm² and

has been specially designed for faster treatment of larger areas like legs.

Do not use the body attachment on the face.

- Facial attachment

The facial attachment has an additional integrated light lter and can be

used for extra-safe treatment of unwanted facial hair on the upper lip, chin

and sideburns. It may also be used on other sensitive areas of the body,

such as the underarms and hard-to-reach areas.

Never use the appliance around the eyes and near the eyebrows.

- Bikini area attachment (SC2008 only)

The bikini area attachment has a special lter for treating the bikini area.

The attachment is optimised for effective hair reduction in the bikini area. It

has been specically designed to remove the coarser hairs in this area. You

can also use the bikini area attachment on the underarms.

Do not use the bikini area attachment on the face.

ENGLISH16

First use and skin test

1 Choose the attachment appropriate for the area you intend to treat.

2 Choose an area close to the area you intend to treat.

Note: Before you use the appliance on the upper lip, chin or sideburns, choose

a mole- and hair-free area below your ear to perform the skin test.

3 Press the on/off button to switch on the appliance.

, The appliance always starts automatically at the lowest setting.

4 Apply one ash at the lowest recommended intensity for your skin

type (for instructions on how to release a ash, see steps 6 to 9

of section ‘Subsequent use’ in this chapter).

5 As long as it feels comfortable (not painful), increase the setting by

one level within the recommended range for your skin type and

apply one ash for each setting. Do not apply more than one ash on

the same spot.

6 After the skin test, wait for 24 hours and check your skin for

any reaction. If your skin shows reactions, choose the highest setting

that did not result in any skin reaction for subsequent use.

When you use the appliance for the rst time, we advise you to perform

a skin test on the area to be treated to check your skin’s reaction to the

treatment and to get accustomed to light-based treatment.

Subsequent use

1 Before every treatment, clean the attachments, the light exit window

and the metallic frame inside the attachments of Philips Lumea

Precision Plus. For more information see chapter ‘Cleaning and

maintenance’.

2 Choose the attachment appropriate for the area you intend to treat.

3 Press the on/off button to switch on the appliance.

Note: It is normal that the appliance and the attachment become warm

during use.

ENGLISH 17

4 Start each treatment by selecting the light intensity very carefully,

based on your skin’s sensitivity and on how comfortable treatment

feels.

Your skin may react differently on different days/occasions for a number of

reasons and especially after tanning. See section ‘Possible side effects and

skin reactions’ in this chapter for more information.

5 Press the % button to increase the intensity. To lower the intensity,

press the ^button.

, Every time you press the button, the corresponding intensity

light starts to ash. This takes a few seconds.

6 Place the appliance at a 90° angle on the skin so that the attachment

and the safety ring are in contact with the skin.

7 Press the safety ring fully onto the skin with slight pressure.

Note: The safety ring has contact switches that together are the safety system

of the appliance. This safety ring prevents unintentional ashing without skin

contact.

, The ‘ready to ash’ light on the back of the appliance lights up green

when all contact switches of the safety ring are in contact with the

skin and the device is charged. This may take a few seconds.

Tip: For easier use, stretch the area of skin you want to treat. On areas with

softer skin, you may need to exert more pressure on the appliance to push in

all contact switches.

ENGLISH18

8 Press the ash button to release a ash. Now you have 2 options to

release the next ash:

A Keep the ash button pressed. The appliance releases one ash

after another as long as the safety ring is in full contact with the skin.

Immediately after the appliance has ashed, slide the appliance to the

next area. Make sure the safety ring is fully pressed onto the skin.

This ‘Slide & Flash mode’ is especially convenient for treatment of larger

areas like the legs.

B Let go of the ash button after each ash. For the next ash, place the

appliance on the area right next to the previously ashed area. Make

sure the safety ring is fully pressed onto the skin.

This ‘Step & Flash mode’ guarantees a precise treatment of e.g. the upper

lip, knees or ankles.

Note: After a few seconds, the appliance is ready to ash again, so make sure

that you move it to the next area immediately after it has ashed.

Do not treat exactly the same area multiple times during one session.

This does not improve the effectiveness of the treatment, but increases

the risk of skin reactions.

Note: The visible light produced by the appliance is the reection of the ash

on the skin and is harmless to your eyes. It is not necessary to wear goggles

during use.

9 To avoid untreated areas, always make sure there is a slight overlap

with the previously treated area when you place the appliance on the

skin. The effective light only comes out of the light exit window. Make

sure the ashes are produced close to each other.

10 Switch off the appliance after you have nished the treatment.

11 Check the light exit window and the attachment for hairs and

dirt and clean the appliance after use (see chapter ‘Cleaning and

maintenance’).

Guidelines for treatment

Average treatment time

Area Approx. treatment time Recommended attachment SC2006

Underarms 1 minute per underarm Body attachment/facial attachment

Bikini line 1 minute per side Body attachment/ facial attachment

Entire bikini area 4 minutes Body attachment/ facial attachment

ENGLISH 19

Area Approx. treatment time Recommended attachment SC2006

One lower leg 8 minutes Body attachment

One full leg 14 minutes Body attachment

Upper lip/ chin/ sideburns 1 minute Facial attachment

Area Approx. treatment time Recommended attachment SC2008

Underarms 1 minute per underarm Body attachment/ Bikini area

attachment

Bikini line 1 minute per side Bikini area attachment

Entire bikini area 4 minutes Bikini area attachment

One lower leg 8 minutes Body attachment

One full leg 14 minutes Body attachment

Upper lip/ chin/ sideburns 1 minute Facial attachment

Note: The average treatment times above have been observed during research

and tests. Individual treatment times may vary from person to person.

Note: Fully charged batteries offer at least 370 ashes at intensity 5. How long

you can use the appliance depends on the size of the area to be treated and

the intensity setting used.

Intended treatment areas

The appliance is intended to treat unwanted hairs from the upper lip, chin,

sideburns, underarms, arms, stomach, bikini area and legs.

Using the appliance on the legs

Check the recommended light intensities table in chapter ‘Preparing for

use’, section ‘Setting the light intensity’ to see which settings are suitable for

your legs.

- You can move the appliance up and down or across the leg, whichever

is more convenient to you.

Note: Bony areas like shinbone and ankles are more sensitive than other areas

of the body. When you press the attachment hard onto these areas, the skin

can be more susceptible to skin reactions, such as skin irritation and redness.

See section ‘Possible side effects and skin reactions’ in this chapter. Press the

attachment onto the skin just hard enough to make the ‘ready to ash’ light go

on, but not harder.

ENGLISH20

Pagina se încarcă...

Philips SC2006 Manual de utilizare

Acest manual este potrivit și pentru

Philips SC2006 Manual de utilizare

în alte limbi

Lucrări înrudite

Alte documente