Yamaha DPX-830 Manual de utilizare

Marca: Yamaha

Model: DPX-830

Categorie: Proiectoare de date

Tip: Manual de utilizare

Acest manual este potrivit și pentru

DPX-830

Digital Cinema Projector

Projecteur Cineme Numerique

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

BRUKSANVISNING

GEBRUIKSAANWIJZING

YAMAHA ELECTRONICS CORPORATION, USA

6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD.

135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H.

SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A.

RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD.

YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND

YAMAHA SCANDINAVIA A.B.

J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD.

17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

DPX-830

Printed in Japan 871D460A20

01EN_DPX-830_EX-cv_new.fm Page 1 Monday, December 26, 2005 8:21 PM

IMPORTANT SAFETY INSTRUCTIONS

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to alert

you to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may

be of sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert you to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

appliance.

Please read all these instructions regarding your projector and retain

them for future reference. Follow all warnings and instructions

marked on the projector.

1 Read instructions: All the safety and operating instructions

should be read before the appliance is operated.

2 Retain instructions: The safety and operating instructions

should be retained for future reference.

3 Warnings: All warnings on the appliance and in the operating

instructions should be adhered to.

4 Instructions: All operating instructions must be followed.

5 Cleaning: Unplug this projector from the wall outlet before

cleaning it. Do not use liquid aerosol cleaners.

6 Attachments and equipment: Never add any attachments

and/or equipment without the approval of the manufacturer as

such additions may result in the risk of fire, electric shock or

other personal injury.

7 Water and moisture: Do not use this projector near water or

in contact with water.

8 Accessories: Do not place this projector on

an unstable cart, stand, tripod, bracket or

table. Use only with a cart, stand, tripod

bracket, or table recommended by the

manufacturer or sold with the projector. Any

mounting of the appliance should follow the

manufacturer's instructions and should use a

mounting accessory recommended by the manufacturer.

An appliance and cart combination should be moved with care.

Quick stops, excessive force and uneven surfaces may cause the

appliance and cart combination to overturn.

9 Ventilation: Slots and openings in the cabinet are provided for

ventilation, ensuring reliable operation of the projector and to

protect it from overheating. Do not block these openings or

allow them to be blocked by placing the projector on a bed,

sofa, rug, or bookcase. Ensure that there is adequate ventilation

and that the manufacturer's instructions have been adhered to.

10 Power sources: This projector should be operated only from

the type of power source indicated on the marking label. If you

are not sure of the type of power, please consult your appliance

dealer or local power company.

11 Power-cable protection: Power-supply cables should be

routed so that they are not likely to be walked on or pinched by

items placed upon or against them. Pay particular attention to

cords at plugs, convenience receptacles, and points where they

exit from the appliance.

12 Overloading: Do not overload wall outlets and extension

cords as this can result in a fire or electric shock.

13 Objects and liquids: Never push objects of any kind through

openings of this projector as they may touch dangerous voltage

points or short-out parts that could result in a fire or electric

shock. Never spill liquid of any kind on the projector.

14 Servicing: Do not attempt to service this projector yourself.

Refer all servicing to qualified service personnel.

15 Damage requiring service: Unplug this projector from the

wall outlet and refer servicing to qualified service personnel

under the following conditions:

(a) If the power-supply cable or plug is damaged.

(b)If liquid has been spilled, or objects have fallen into the

projector.

the operating instructions. Adjust only those controls that are

covered by the operating instructions. An improper

adjustment of other controls may result in damage and may

often require extensive work by a qualified technician to

restore the projector to its normal operation.

(d)If the projector has been exposed to rain or water.

(e) If the projector has been dropped or the cabinet has been

damaged.

(f) If the projector exhibits a distinct change in performance -

this indicates a need for service.

16 Replacement parts: When replacement parts are required,

be sure that the service technician has used replacement parts

specified by the manufacturer or parts having the same

characteristics as the original part. Unauthorized substitutions

may result in fire, electric shock or other hazards.

17 Safety check: Upon completion of any service or repair to

this projector, ask the service technician to perform safety

checks determining that the projector is in a safe operating

condition.

18 Connection cable: Use the supplied RS-232C and RGB

cables with this equipment to keep interference within the limits

of an FCC/EN55022 Class B device.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

For Canadian customers

To prevent electric shock, match wide blade of plug to

wide slot and fully insert.

This Class B digital apparatus complies with Canadian ICES-

003.

IMPORTANT!

Please record the serial number of this unit in the space below.

Model:

Serial No.:

The serial number is located on the bottom of the unit.

Retain this Owner’s Manual in a safe place for future reference.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

COMPLIANCE INFORMATION STATEMENT

(DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party: Yamaha Electronics Corporation

Address: 6660 Orangethorpe Avenue

Buena Park, CA90620

Telephone: 714-522-9105

Fax: 714-670-0108

Type of Equipment: Projector

Model Name: DPX-830

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including interference that may cause undesired operation.

See the owner’s manual instructions if interference to radio reception is suspected.

FCC INFORMATION (for US customers only)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the instructions

contained in this manual, meets FCC requirements.

Modifications not expressly approved by Yamaha may void

your authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories

and/or another product use only high quality shielded cables.

Cable/s supplied with this product MUST be used. Follow

all installation instructions. Failure to follow instructions

could void your FCC authorization to use this product in the

USA.

3. NOTE: This product has been tested and found to comply

with the requirements listed in FCC Regulations, Part 15 for

Class “B” digital devices. Compliance with these

requirements provides a reasonable level of assurance that

your use of this product in a residential environment will not

result in harmful interference with other electronic devices.

This equipment generates/uses radio frequencies and, if not

installed and used according to the instructions found in the

users manual, may cause interference harmful to the operation of

other electronic devices.

Compliance with FCC regulations does not guarantee that

interference will not occur in all installations. If this product is

found to be the source of interference, which can be determined

by turning the unit “OFF” and “ON”, please try to eliminate the

problem by using one of the following measures:

Relocate either this product or the device that is being affected

by the interference.

Utilize power outlets that are on different branch (circuit breaker

or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead, change

the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type

of product. If you can not locate the appropriate retailer, please

contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe

Ave, Buena Park, CA 90620.

The above statements apply ONLY to those products distributed

by Yamaha Corporation of America or its subsidiaries.

iii

Caution: Read this before operating this unit.

Warning

• This unit must be grounded

• Do not use this projector in a computer room

This projector is not for use in a computer room as defined in

the Standard for the Protection of Electronic Computer/Data

Processing Equipment, ANIS/NFPA 75.

• Unplug immediately if there is something wrong with

your projector

Do not operate if smoke, strange noise or odor comes out of

the projector. It might cause fire or electric shock. If this

happens, unplug immediately and contact your dealer.

• Never remove the cabinet

This projector contains high voltage circuitry. An inadvertent

contact may result in an electric shock. Except as specifically

explained in the owner's manual, do not attempt to service

this product yourself. Contact your dealer when you want to

fix, adjust or inspect the projector.

• Do not modify this projector

It can lead to fire or electric shock.

• Do not continue using this projector if you drop or

break it

Unplug the projector and contact your dealer for inspection.

It may lead to fire if you continue using it.

• Do not face the projector lens towards the sun

It can lead to fire.

• Use correct voltage

If you use incorrect voltage, it can lead to fire.

• Do not place the projector on uneven or unstable

surfaces

Place the projector on a leveled and stable surface only.

• Do not look into the lens when it is operating

It may cause serious eye injury.

• Do not turn off the main power abruptly or unplug the

projector during operation

It can lead to lamp breakage, fire, electric shock or other

trouble. Always wait for the fan to turn off before turning the

main power off.

• Avoid all contact with the air exhaust vents and

bottom plate

The air exhaust vents and bottom plate heat up during

operation and may cause personal injury or damage to other

equipment. Do not touch them, place other equipment in front

of the air exhaust vents, or set the projector on a desk which is

easily affected by heat.

• Do not look into the air exhaust vent when the

projector is operating

Heat, dust, etc. may blow out of it and cause injury to your

eyes.

• Do not block the air intake and exhaust vents

If they are blocked, heat may be generated inside the

projector, causing deterioration in the projector quality and/or

fire.

Place of installation

For safety reasons, refrain from setting the projector at any place

subjected to high temperature and high humidity. Maintain an

operating temperature, humidity and setting as specified below:

• Operating temperature: between 41°F (5°C) and 95°F (35°C).

• Operating humidity: between 30% and 90%

• Never put any heat-producing device under the projector. The

projector may overheat.

• Do not install the projector near any equipment that produces a

strong magnetic field. Also refrain from installing near the

projector any cable carrying a large current.

• Do not install the projector in a place that is unstable or subject

to vibration; otherwise, it may fall and cause serious injury

and/or damage to the unit.

• Do not stand the projector on its side; otherwise, it may fall and

cause serious injury and/or damage to the unit.

• Do not tilt the projector more than 10° right/left or 15°

forward/backward; otherwise, it may cause a lamp explosion.

• Do not place the projector near an air conditioning unit or heater

to avoid hot air to the vents of the projector.

• Avoid installing this unit where foreign object may fall onto this

unit and/or this unit may be exposed to liquid dripping or

splashing. On the top of this unit, do not place:

– Other components, as they may cause damage and/or discoloration on

the surface of this unit.

– Burning objects (i.e. candles), as they may cause fire, damage to this

unit, and/or personal injury.

– Containers with liquid in them, as they may fall and liquid may cause

electrical shock to the user and/or damage to this unit.

European compliance notice

This video projector complies with the requirements of the EC

Directive 89/336/EEC “EMC Directive” as amended by Directive

92/31/EEC and 93/68/EEC, and 73/23/EEC “Low Voltage

Directive” as amended by Directive 93/68/EEC.

This unit is not disconnected from the AC power source as long

as it is connected to the wall outlet, even if this unit itself is

turned off. This state is called the standby mode. In this state,

this unit is designed to consume a very small quantity of power.

For U.K. customers

If the socket outlets in the home are not suitable for the plug

supplied with this appliance, it should be cut off and an

appropriate 3-pin plug fitted. For details, refer to the instructions

described below.

Note

• The plug severed from the mains lead must be destroyed, as a plug

with a bared flexible cord is hazardous if engaged in a live socket

outlet.

IMPORTANT

THE WIRES IN THIS MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

GREEN-AND-YELLOW: EARTH

BLUE: NEUTRAL

BROWN: LIVE

As the colours of the wires in the mains lead of this apparatus

may not correspond with the coloured markings identifying the

terminals in your plug, proceed as follows:

The wire which is coloured GREEN-AND-YELLOW must be

connected to the terminal in the plug which is marked by the

letter “E” or the safety earth symbol or coloured GREEN or

GREEN-AND-YELLOW.

The wire which is coloured BLUE must be connected to the

terminal marked with the letter “N” or coloured BLACK.

The wire which is coloured BROWN must be connected to the

terminal marked with the letter “L” or coloured RED.

1 Getting started 2

Inappropriate places for installation .....................2

Accessory check ..................................................3

Inserting the batteries into the remote control......4

2 Controls and functions 5

Projector overview ...............................................5

Remote control overview .....................................6

Using the picture quality adjusting buttons .....6

3 Using the remote control 7

Operational range ................................................7

Reception angle ...................................................7

4 Installation 8

Setting up the screen ...........................................8

Mounting the projector on the table .....................8

Adjusting the projection angle..............................8

Mounting the projector on the ceiling ...................9

Screen size and projection distance ..................10

5 Connections 11

Basic home theater system connection .............11

Connecting to a video player, etc.......................12

Connecting to a DVD player or

HDTV decoder ...................................................12

HDMI or DVI connections ..................................13

D-SUB connections............................................13

Connecting to a computer..................................14

TRIGGER terminal.............................................15

Plugging in the power cable...............................15

6 Projection 16

Viewing video images ........................................16

KEYSTONE adjustment................................17

IRIS button ....................................................17

Examples of the aspect ratio.........................18

Setting the aspect ratio .................................18

Viewing computer images..................................19

AUTO / AUTO SYNC buttons .......................20

Connecting to a notebook computer.............20

7Menu 21

Menu overview...................................................21

How to set the menus ...................................22

Menu settings.....................................................23

8 Adjusting video images 27

Selecting the gamma mode (GAMMA) ............. 27

Customizing the gamma mode (GAMMA) ........ 27

Adjusting brightness (CONTRAST and

BRIGHTNESS).................................................. 27

CONTRAST ................................................. 27

BRIGHTNESS.............................................. 27

Selecting the color temperature

(COLOR TEMP.)............................................... 28

Customizing the color temperature

(COLOR TEMP.)............................................... 28

About color temperature .............................. 28

Adjusting color (SATURATION and HUE) ........ 29

SATURATION.............................................. 29

HUE ............................................................. 29

Sharpening or softening images

(SHARPNESS).................................................. 29

LPF (Progressive filter) ..................................... 29

9 MEMORY function 30

Saving memory settings.................................... 30

10 Adjusting computer images 31

Adjusting computer images............................... 31

Simple method to adjust the image

position......................................................... 31

11 Replacing the lamp 32

Interval of lamp replacement............................. 32

Replacing the lamp ........................................... 33

Maintenance...................................................... 33

12 Attaching a lens filter and cap 34

Attaching a commercially available lens filter.... 34

Attaching the lens cap....................................... 34

13 Troubleshooting 35

Troubleshooting ................................................ 35

14 Indicators 38

Normal conditions ............................................. 38

Abnormal conditions.......................................... 38

15 Specifications 39

Projector specifications ..................................... 39

Dimension drawings.......................................... 41

Table of contents

◆ Inappropriate places for installation

If this unit is not correctly installed in an appropriate place, it may cause fire or failure, or damage the unit itself. Carefully choose the place to

install this unit by avoiding the places listed below.

1. Places where the temperature and humidity vary greatly

• Do not install this unit in a place where the temperature and humidity become extremely high or the temperature becomes extremely

low.

• This unit must be used within a temperature range of 41°F (5°C) to 95°F (35°C).

• This unit must be used within a humidity range of 30% to 90%

2. Places without adequate ventilation

• Install this unit with at least 30 cm (1 feet) of ventilation space on the top, right and left, and back.

• Do not cover the ventilation slots of this unit. Covering the slots will obstruct heat dissipation.

• Install this unit on the firm surface.

• Do not cover this unit with a tablecloth, etc.

• Make sure there is nothing to get sucked into the ventilation slots so that the temperature of this unit does not become too high.

• If you are going to install the unit in a rack, be sure to leave space for ventilation to prevent exhaust overheating the unit.

3. Places where it gets dusty

• If the filter is blocked with dust, the temperature of this unit may become too high.

4. Places with too much vibration or impact

• Vibration and impact can damage parts of this unit.

5. Places where this unit gets exposed to water or high humidity

• If this unit is exposed to water of high humidity, it may cause a fire or electrical shock.

6. Unstable places

• If this unit is installed on an unstable or an inclined tabletop, it may fall and cause damage to the unit or personal injury.

7. In close proximity to a radio or stereo

• The unit may interfere with reception if placed in close proximity to a radio or television receiver.

8. Uneven surfaces

• Slanting the projector more than 10° right and left or 15° front and rear may cause problems (such as the lamp exploding).

Warning

• To ensure vivid, high contrast images, make sure that no light other than the projector light falls directly on the screen.

*DLP

, DMD

, DarkChip2

, and DarkChip3

are registered

trademarks of the Texas Instruments corporation of America.

* HDMI, the HDMI logo and High-Definition Multimedia Interface

are trademarks or registered trademark of HDMI Licensing LLC.

Getting started1

◆ Accessory check

The following accessories are provided with this projector. Check to be sure that all of the accessories are packed in the package.

Important

• The supplied power cables are to be used exclusively for this product. Never use them for other products.

• The power cables for use in the U.S. and Europe are included with this projector. Use the appropriate one for your country.

• The provided power cable for the U.S. is rated at 120 V. Never connect this cable to any outlet or power supply using other

voltages or frequencies than rated. If you use a power supply using other voltage than rated, prepare an appropriate power

cable separately.

■ Cables ■ Power supply parts

RGB cable for PC

(WF76940)

RS-232C cable

(WF76930)

Power cable

• Used for adjustment by service person.

■ Remote control parts ■ Others

Remote control R03 (Size-AAA) battery (two) Lens cap Owner’s manual

mini D-SUB

15-pin

mini D-SUB

15-pin

D-SUB 9-pin

8-pin

(For Europe)

(For US)

RDP-81

-V

-S

STA

ASPECT

HIDE

AUTO

SQUEEZ

S. ZO

NORMAL

COMP.

HDMI

ASPECT

INPUT

KEYSTN

SETTING

BRIGHT

SHAR

C.TEMP

CON

MEMORY

IRIS

GAM

DPX-830

Digital Cinema Projector

Projecteur Cineme Numerique

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

BRUKSANVISNING

GEBRUIKSAANWIJZING

◆ Inserting the batteries into the remote control

1. Remove the rear lid of the remote control.

2. Check the polarity markings (+, –) of the batteries, and set

them correctly, inserting their (–) side first.

• If the battery is inserted from the (+) side first, inserting the (–)

side becomes difficult because the coil spring end hits on the

battery side. If the battery is forced to insert in this way, the

outer label of the battery may get ripped and cause a short-

circuit and heating.

3. Attach the rear lid.

Important

• Use two size-AAA batteries (R03).

• Replace the two batteries with new ones when the remote

control is slow to operate.

Caution

• Using the wrong type of battery may cause an explosion.

• Only Carbon-Zinc or Alkaline-Manganese Dioxide type batteries should be used.

• Dispose of used batteries according to your local regulations.

• Batteries may explode if misused. Do not recharge, disassemble, or dispose of in fire.

• Be sure to handle the battery according to the instructions.

• Load the battery with its positive (+) and negative (–) sides correctly oriented as indicated on the remote control.

• Keep batteries out of reach of children and pets.

• Remove the batteries, if the remote control is not used for a long time.

• Do not combine a new battery with an old one.

• If the solution of batteries comes in contact with your skin or clothes, rinse with water. If the solution comes in contact with

your eyes, rinse them with water and then consult your doctor.

◆ Projector overview

1. FOCUS ring

2. ZOOM ring

3. Control panel

4. Air intake vent

5. Remote control sensor (Front)

6. Air intake vent

7. Air exhaust vent

8. Adjustment foot (Front)

9. Lamp cover (see page 33)

10. Adjustment feet (Rear)

11. Foot adjustment buttons (Left/Right)

12. Air intake vent

Control panel

1. STANDBY/ON, button

2. AUTO SYNC, button

3. D-SUB/HDMI, button

4. MENU button

5. STATUS indicator

6. POWER indicator

7. KEYSTONE, ENTER button

8. VIDEO/S/COMP., button

9. button

Important

• While the menu is on the screen, the KEYSTONE button

functions as the ENTER button and the D-SUB/HDMI,

VIDEO/S/COMP., and AUTO SYNC buttons function as

the , , and buttons respectively.

Rear panel

1. AC IN

2. HDMI input terminal

3. D-SUB input terminal

4. Remote control sensor (Rear)

5. COMPONENT input terminals

6. Air exhaust vent

7. SERIAL terminal

• Used for adjustment by service person.

8. USB terminal

• Used for adjustment by service person.

9. TRIGGER terminal

• Used for the optional electric screen.

10. S-VIDEO input terminal

11. VIDEO input terminal

6 7

Top view

Side view

Bottom

view

DIGITAL CINEMA PROJECTOR DPX-830

AUTO SYNC

AC IN

HDMI

D-SUB

SERIAL

S-VIDEO

VIDEO

COMPONENT

USB

TRIGGER

23145

71011

6 8 9

Controls and functions2

◆ Remote control overview

1. IR signal transmitter

2. ON ( I ) button

3. AUTO button

4. NORMAL button

5. HDMI button

6. D-SUB button

7. Cursor buttons ( / / / )

8. MENU button

9. MEMORY buttons

10. The picture quality adjusting buttons*

* See the below for the picture quality adjusting buttons.

11. STANDBY ( ) button

12. HIDE button

13. ASPECT button

14. S. ZOOM (Smart zoom) button

15. SQUEEZ (Squeeze) button

16. VIDEO button

17. COMP. (Component) button

18. S-VIDEO button

19. ENTER button

20. KEYSTN (Keystone) button

21. IRIS button

(see page 17)

Important

•

When you press a button on the remote control, the buttons

on the remote control will light up. Wait approximately 6

seconds after releasing the button for the lights to turn off.

Using the picture quality adjusting buttons

When you press either of the picture quality adjusting buttons, the message for adjusting the picture quality appears. Adjust the picture quality

by pressing the and buttons. The picture quality adjustment can be made alternatively in the IMAGE menu (see page 23).

CONT. (CONTRAST) ..................................... Adjusts the contrast of the projected image.

GAMMA.......................................................... Selects one of the preset gamma modes.

BRIGHT (BRIGHTNESS) .............................. Adjusts the brightness of the projected image.

SHARP (SHARPNESS) .................................. Adjusts the sharpness of the projected image.

C. TEMP (COLOR TEMPERATURE) ........... Selects one of the preset color temperatures.

POWER

S-VIDEO

D-SUB

STANDBYON

ASPECT

HIDEAUTO

SQUEEZ

S. ZOOM

NORMAL

COMP. VIDEOHDMI

ASPECT

INPUT

ENTER

KEYSTN

SETTING

BRIGHT

SHARP

C.TEMP

CONT.

MEMORY

231

IRIS

GAMMA

RDP-81

◆ Operational range

Operate the remote control within a distance of 10 m from the

projector, pointing the light beam at the remote control sensor (front

or rear) of the projector.

Caution

• Keep the remote control sensor out of direct sunlight or

fluorescent lamp light.

• Keep the remote control sensor at least 2 m away from

fluorescent lamps. Otherwise, the remote control may

malfunction.

• If there is an inverter-operated fluorescent lamp near the

remote control, the remote control operation may become

unstable. On this occasion, stick a commercially available

protection sticker on one of the sensors that is closer to

the fluorescent lamp.

When operating the remote control, keep the distance from the remote

control to the projector via the screen within about 5 m. The operable

range of the remote control, however, depends on the characteristics

of the screen.

◆ Reception angle

Vertical directions

Vertical directions (ceiling mount)

30˚30˚

AC IN

RDP-81

POWER

S-VIDEO

D-SUB

STANDBYON

ASPECT

HIDEAUTO

SQUEEZ

S. ZOOM

NORMAL

COMP. VIDEOHDMI

ASPECT

INPUT

ENTER

KEYSTN

SETTING

BRIGHT

SHARP

C.TEMP

CONT.

MEMORY

231

IRIS

GAMMA

RDP-81

POWER

S-VIDEO

D-SUB

STANDBYON

ASPECT

HIDEAUTO

SQUEEZ

S. ZOOM

NORMAL

COMP. VIDEOHDMI

ASPECT

INPUT

ENTER

KEYSTN

SETTING

BRIGHT

SHARP

C.TEMP

CONT.

MEMORY

231

IRIS

GAMMA

Front panel Rear panel

Distance to sensor Angle to sensor

10 m

(approximate value)

30° left and right

(approximate value)

RDP-81

S-VIDEO

DBY

SPE

HIDEAUTO

SQU

S. Z

ORMA

COM

HDM

PECT

EYSTN

ENU

BRIG

SHAR

MOR

IRIS

AMM

20˚

10˚

20˚

10˚

Using the remote control3

◆ Setting up the screen

Install the screen perpendicularly to the projector. If the screen can not be installed in such a way, adjust the projection angle of the projector as

shown below.

Important

• Before setting up the screen, be sure to set SCREEN ASPECT in the SETUP menu to either 16:9 or 4:3.

• Install the screen and projector so that the projector’s lens is placed at the horizontal position of the screen center.

• Do not install the screen where it is exposed to direct sunlight or lighting. Light directly reflecting on the screen makes the

projected images whitish and hard to view.

◆ Mounting the projector on the table

Determine the distance from the screen to the projector according to the size of the images to be projected (see page 10).

• Do not place this projector on a carpet or blanket because the intake vent on the bottom surface will be blocked and the inside of the

projector will overheat, causing a breakdown or fire.

• Depending on the installation conditions, warm air that is emitted from the exhaust vents may flow into the intake vent, causing the projector

to display “Over Temperature” and then stop projecting images. If this happens, clear the area around the exhaust vent.

◆ Adjusting the projection angle

This projector is provided with three feet for adjusting the projection angle on the bottom surface. Adjust the projection angle depending on

the position of the projector.

For the best projection, project images on a flat screen installed at 90 degrees to the floor. If necessary, tilt the projector using the adjustment

feet on the bottom of the projector.

1. Tilt the projector upwards to the appropriate angle.

2. Press the foot adjustment buttons next to the adjustment

feet (rear), and the adjustment feet will come out.

3. Release the buttons to lock the adjustment feet (rear) to

that position.

4. Rotate the adjustment feet (rear) for fine adjustment.

• If necessary, rotate the adjustment foot (front) for fine

adjustment.

After using the projector

Put the adjustment feet (rear) back into the projector by pressing the foot adjustment buttons.

When projected images are distorted to a trapezoid

When the screen and the projector are not placed perpendicularly to each other, projected images become trapezoidal. If you cannot make the

projector and the screen perpendicular to each other by mechanical adjustments, adjust keystone (see page 17).

A=B

STANDBY/ON

POWER STATUS

AUTO SYNC

ENTER

DIGITAL CINEMA PROJECTOR DPX-830

Projected distance

Height of the

projected image

Screen

Adjustment feet (rear)

4 Installation

◆ Mounting the projector on the ceiling

To view images projected by the ceiling mounted projector from the front:

When the projector is installed on the ceiling, the special ceiling mount bracket, which is commercially available, is required. Be sure to ask a

certified installation specialist for installation of the projector. Contact your dealer for details.

• Yamaha assumes no responsibilities for any damage caused by use of other manufacturer’s ceiling bracket and by inadequate installation

conditions even within the warranty period.

• When installing the projector on the ceiling, set LOCATION in the SETUP menu to FRONT/CEILING.

• Ask your installation specialist to provide a breaker. When you do not use the projector, be sure to shut down the main power by the breaker.

• When the projector is installed on the ceiling, projected images may appear darker than those projected when the projector is installed on the

floor.

• Do not install the projector where the exhaust vents are exposed to air emitted by an air conditioning. Such installation may cause a

breakdown.

• Do not install the projector near a fire alarm because it emits hot air from its exhaust vents.

Optional part

To view images projected on a translucent screen from behind:

Be sure to ask a certified installation specialist for installation of the projector. Contact your dealer for details.

• To view images projected from behind the screen, set LOCATION in the SETUP menu to REAR/TABLE.

Ceiling mount bracket PMT-L71 (low ceilings)

PMT-H75 (high ceilings)

◆ Screen size and projection distance

Refer to the following diagram to determine the screen size.

When the aspect ratio of the screen is 16:9

• The above figures are approximate and may be slightly different from the actual

measurements.

When the aspect ratio of the screen is 4:3

When the aspect ratio of the screen is 4:3, the positional relation between the projected image and the screen is as shown below. Refer to the

following table for installation.

When the aspect ratio of the image is 4:3

• The above figures are approximate and may be slightly different from the actual

measurements.

When the aspect ratio of the image is 16:9

• The above figures are approximate and may be slightly different from the actual measurements.

Screen size

Width of the projected image

Height of the

projected image

Center of the lens

Projected distance (L)

Screen size 16:9 Projected distance (L)

Diagonal Height A Width B Min. Max.

inch cm inch cm inch cm inch m inch m inch cm

40 102 20 50 35 89 56 1.4 68 1.7 6.6 17

60 152 29 75 52 133 85 2.2 103 2.6 9.9 25

80 203 39 100 70 177 114 2.9 139 3.5 13.2 33

100 254 49 125 87 221 143 3.6 174 4.4 16.5 42

150 381 74 187 131 332 216 5.5 262 6.6 24.7 63

200 508 98 249 174 443 289 7.3 349 8.9 32.9 84

250 635 123 311 218 553 362 9.2 – – 41.2 105

275 699 135 342 240 609 398 10.1 – – 45.3 115

Center of the lens

Projected distance (L)

Height of the

projected image

Width of the projected image

Screen size

Screen size 4:3 Project distance (L)

Diagonal Height A Width B Min. Max.

inch cm inch cm inch cm inch m inch m inch cm

40 102 24 61 32 81 65 1.6 79 2.0 6.8 17

60 152 36 91 48 122 98 2.5 119 3.0 10.2 26

80 203 48 122 64 163 132 3.3 159 4.0 13.6 35

100 254 60 152 80 203 165 4.2 200 5.1 17.0 43

150 381 90 229 120 305 248 6.3 300 7.6 25.5 65

200 508 120 305 160 406 332 8.4 – – 34.0 86

250 635 150 381 200 508 – – – – 42.5 108

275 699 165 419 220 559 – – – – 46.8 119

Screen size 4:3 Size of the projected image 16:9 Project distance (L)

Diagonal Height C Width B Height A Blank space (D) Min. Max.

inch cm inch cm inch cm inch cm inch cm inch m inch m inch cm

40 102 24 61 32 81 18.0 46 3.0 8 51 1.3 63 1.6 6.0 15

60 152 36 91 48 122 27.0 69 4.5 11 78 2.0 95 2.4 9.1 23

80 203 48 122 64 163 36.0 91 6.0 15 105 2.7 127 3.2 12.1 31

100 254 60 152 80 203 45.0 114 7.5 19 132 3.3 159 4.0 15.1 38

150 381 90 229 120 305 67.4 171 11.3 29 198 5.0 240 6.1 22.7 58

200 508 120 305 160 406 89.9 228 15.0 38 265 6.7 320 8.1 30.2 77

250 635 150 381 200 508 112.4 286 18.8 48 332 8.4 401 10.2 37.8 96

300 762 180 457 240 610 134.9 343 22.6 57 398 10.1 – – 45.3 115

Screen size

Height of the screen

Width of the projected image

Height of the

projected image

Center of the lens

Projected distance (L)

◆ Basic home theater system connection

Important

• Make sure that the power of the projector and that of the video equipment are turned off.

• Connection methods and terminal names may differ depending on the video equipment you are connnecting. Refer to the

instruction manual for the video equipment.

• Use of a long cable may affect the quality of the projected image.

HDMI

D-SUB

SERIAL

AC IN

VIDEO

COMPONENT

PB/CB

PR/CR

USB

TRIGGER

S-VIDEO

Video player

DVD player

Set-top box or digital tuner

Connections5

◆ Connecting to a video player, etc.

Using the VIDEO terminal

1. Connect one end (yellow) of a commercially available video

cable to the VIDEO input terminal of this projector.

2. Connect the other end (yellow) of the video cable to the

VIDEO output terminal of the video equipment.

Using the S-VIDEO terminal

1. Connect one end of the commercially available S-video

cable to the S-VIDEO input terminal of this projector.

2. Connect the other end of the S-video cable to the S-VIDEO

output terminal of the video equipment.

When a TV tuner or VCR is connected:

When you use this projector with a TV tuner or VCR connected, no image may appear or a No Signal message may appear on the screen when

you change to a channel that is not being received. In this case, set the channels of the TV tuner or VCR again. To avoid this problem, use the

TV tuner or VCR with its channel skip function enabled. (Only channels that are being received will be displayed.)

◆ Connecting to a DVD player or HDTV decoder

This projector can be connected to a video equipment such as a DVD player or HDTV decoder. Be sure to connect component video output

terminals of the video equipment to the COMPONENT input terminals of this projector.

• Images may not be projected correctly depending on the type of

DVD player you use.

• It may take some time before an image is displayed on the screen

depending on the type of the input signal.

S-VIDEO

VIDEO

COMPONENT

Y PB/CB PR/CR

Video player, etc.

To VIDEO

output terminal

Video cable

(commercially available)

To VIDEO

input terminal

S-VIDEO

VIDEO

COMPONENT

Y PB/CB PR/CR

Video player, etc.

S-VIDEO cable

(commercially available)

To S-VIDEO

output terminal

To S-VIDEO

input terminal

VIDEO

COMPONENT

PB/CB

PR/CR

S-VIDEO

Component cable

(commercially available)

DVD player or HDTV decoder

◆ HDMI or DVI connections

You can project high-quality images by connecting the HDMI input terminal of this projector to video equipment having a HDMI output

terminal or a DVI-D output terminal. In addition, this projector supports HDCP and is able to receive encrypted digital video data that are

output from DVD players.

• HDCP (High-bandwidth Digital Content Protection), developed by Intel Corporation, is a method to encrypt digital video data for the

purpose of copy protection.

• HDMI (High-Definition Multimedia Interface) is fully backward compatible with computers, displays and consumer electronics equipments

incorporating the DVI standards.

• Depending on the video equipment you wish to connect, this projector may not display any image or not operate correctly. In such cases,

refer to the instruction manual for the connected video equipment.

When you connect this projector and DVI-Digital equipment (such as DVD player) by using the HDMI

terminal or DVI-D terminal, black color may appear light and pale depending on the type of the connected

equipment.

• This depends on the black level setting of the connected equipment. There are two kinds of methods to digitally transfer image data, in

which different black level settings are employed respectively. Therefore, the specifications of the signals output from DVD players differ

depending on the type of the digital data transfer method they use.

• Some DVD players are provided with a function to switch the methods to output digital signals. If your DVD player has such function, set it

as follows:

EXPAND or ENHANCED NORMAL

• Refer to the instruction manual of your DVD player for details.

• When your digital equipment does not have such function, adjust the BRIGHTNESS to +16 and CONTRAST to -17 in the IMAGE menu of

this projector, or adjust the black color by viewing the image.

◆ D-SUB connections

You can project high-quality images by connecting the D-SUB terminal of this projector to video equipment having a D-SUB output terminal

or BNC terminal.

• Use the supplied RGB cable when connecting the projector and the equipment.

• For video equipment having a BNC terminal, use a commercially available BNC to D-SUB cable when connecting to this projector.

SERIAL

D-SUB

USB

AC IN

TRIGGER

HDMI

Equipment having a DVI-D terminal

DVI-HDMI conversion cable

(commercially available)

To HDMI terminal

To DVI-D terminal

Equipment having a HDMI terminal

HDMI cable (commercially available)

To HDMI terminal

SERIAL

D-SUB

USB

AC IN

TRIGGER

HDMI

Equipment having a D-SUB terminal

Equipment having a BNC terminal

To D-SUB terminal

To BNC terminal

RGB cable

BNC to D-SUB cable (commercially available)

To D-SUB terminal

◆ Connecting to a computer

Important

• Make sure that the power of the projector and that of the computer are turned off.

• When connecting the projector to a desktop computer, disconnect the RGB cable that is connected to the monitor.

• This projector may not display any image or not operate correctly depending on the computer you wish to connect. In such

cases, refer to the instruction manual of the connected computer.

For analog connections:

1. Connect one end of the supplied RGB cable to the D-SUB

terminal of this projector.

2. Connect the other end of the RGB cable to the monitor port

of the computer.

• Additional devices, such as a conversion connector and an

analog RGB output adapter, are required depending on the type

of the computer to be connected.

• This projector does not support 3-line signals (SYNC-ON-

GREEN signals).

For digital connections:

1. Connect one end of a commercially available DVI-HDMI

conversion cable to the HDMI terminal of this projector.

2. Connect the other end of the DVI-HDMI conversion cable to

the DVI terminal of the computer.

• Additional devices, such as a conversion connector and an

analog RGB output adapter, are required depending on the type

of the computer to be connected.

• When viewing images being input from a digital-connected

computer, press the HDMI button on the remote control.

• Turn on the power of the projector before that of the computer.

• Using a long cable may decrease the quality of projected

images.

• The signal input from the HDMI terminal does not output

through the D-SUB terminal.

HDMI

D-SUB

SERIAL

S-VIDEO

VIDEO

COMPONENT

Y PB/CB PR/CR

USB

TRIGGER

To D-SUB terminal

To monitor port

RGB cable

HDMI

D-SUB

SERIAL

S-VIDEO

VIDEO

COMPONENT

Y PB/CB PR/CR

USB

TRIGGER

To DVI

terminal

DVI-HDMI

conversion cable

(commercially

available)

To HDMI terminal

◆ TRIGGER terminal

The TRIGGER terminal on the rear of the projector is a terminal that outputs 12 V signal to control an externally connected equipment when

images are projected.

To use the TRIGGER terminal, set TRIGGER OUT to ON in the

SETUP menu. (The factory default is OFF.) Use the following

steps to change the setting.

With the SETUP menu:

(See page 23 for menu setting.)

1. Display the SETUP menu.

2. Select TRIGGER OUT by pressing the or button.

3. Select ON by pressing the or button.

To exit from the menu:

4. Press the MENU button several times.

• Do not use the signal output from the TRIGGER terminal as

a power for other equipment.

• Do not link the TRIGGER terminal with an audio terminal

of other equipment. This may cause a damage.

• The rated current for the TRIGGER terminal is 200 mA. If

you use a current exceeding this rating, a failure may occur.

• For information about electric screens, please contact screen

manufacturers.

◆ Plugging in the power cable

For US For Europe

1. Plug the supplied power cable into the AC IN of this projector.

2. Plug the other end of the power cable into a power outlet.

• The power cables for use in the U.S. and Europe are included with this projector. Use the appropriate one for your country.

• This projector uses the power plug of three-pin grounding type. Do not take away the grounding pin from the power plug. If the power

plug doesn’t fit your wall outlet, ask an electrician to change the wall outlet.

• The provided power cable for the U.S. is rated at 120 V. Never connect this cable to any outlet or power supply using other voltages or

frequencies than rated. If you use a power supply using other voltage than rated, prepare an appropriate power cable separately.

AC IN

HDMI

D-SUB

SERIAL

S-VIDEO

VIDEO

COMPONENT

Y PB/CB PR/CR

USB

TRIGGER

Ring (NC)

Tip (12 V)

Sleave (ground 0 V)

To TRIGGER terminal

AC IN

HDMI

D-SUB

SERIAL

USB

TRIGGER

Earthing

terminal

Power cable

AC IN

HDMI

D-SUB

SERIAL

USB

TRIGGER

Power cable

Earthing

terminal

◆ Viewing video images

Preparation:

• Always remove the lens cap before operating the projector.

• Turn on the power of the connected video equipment.

1. Confirm the POWER indicator lights up red.

• If the projector was turned off before the lamp was cooled down sufficiently last time, the fan may start rotating and the STANDBY/ON

button may not work after the power cable is plugged. (The STATUS indicator blinks green.) After the fan stops rotating, press the

STANDBY/ON button to turn back on the POWER indicator.

2. Press the STANDBY/ON () button on the projector or ON ( I ) button on the remote control.

• It may take about one minute for the lamp to light up.

• The lamp fails to light up on rare occasions. If this happens, wait for a few minutes and then try again.

• Do not cover the lens with the lens cap while the lamp is on.

3. Select an input source.

• Press the VIDEO/S/COMP. or D-SUB/HDMI button on the projector, or press one of the input selector buttons (VIDEO, S-VIDEO,

COMP., HDMI, or D-SUB) on the remote control to select the input you desire. Be sure to select the input source that is corresponding

to the terminal in use.

–The input source is switched to VIDEO, S-VIDEO or COMPONENT at every press of the VIDEO/S/COMP. button on the projector.

–The input source is switched between D-SUB and HDMI at every press of the D-SUB/HDMI button on the projector.

• There may be a delay before an image is displayed on the screen depending on the type of the input signal.

• Some images become easier to view when the setting of aspect ratio is changed (see page 18).

4. Adjust the position of the projector to keep an appropriate projection distance with which images are projected in their

specified sizes.

5. Adjust the position of the projector so that the projector and the screen are perpendicular to each other (see page 8).

• When the projector cannot be positioned perpendicularly to the screen, adjust the projection angle (see page 8).

6. Adjust the size of the projected image by turning the ZOOM ring.

7. Adjust the focus by turning the FOCUS ring.

Repeat steps 4 to 7, if necessary.

Important

• When a 4:3 image is continuously displayed for a long time before displaying a 16:9 image, the afterimages of the black

bars on each side may appear on the 16:9 image screen. Consult your dealer in this case.

• Do not display a still picture for a long time because the afterimages may persist on the screen.

POWER

S-VIDEO

D-SUB

STANDBYON

ASPECT

HIDEAUTO

SQUEEZ

S. ZOOM

NORMAL

COMP. VIDEOHDMI

ASPECT

INPUT

ENTER

KEYSTN

SETTING

BRIGHT

SHARP

C.TEMP

CONT.

MEMORY

231

IRIS

GAMMA

STANDBY/ON

POWER STATUS

AUTO SYNC

ENTER

DIGITAL CINEMA PROJECTOR DPX-830

RDP-81

STANDBY/ON

button

VIDEO/S/COMP.

button

FOCUS ring

ON (

I )

button

ZOOM ring

COMP. button

VIDEO button

S-VIDEO button

D-SUB/HDMI

button

HDMI button

D-SUB button

Projection6

Pagina se încarcă ...

Yamaha DPX-830 Manual de utilizare

Marca: Yamaha

Model: DPX-830

Categorie: Proiectoare de date

Tip: Manual de utilizare

Acest manual este potrivit și pentru

Descărcați PDF

raport

în alte limbi

Türkçe: Yamaha DPX-830 Kullanım kılavuzu
français: Yamaha DPX-830 Manuel utilisateur
English: Yamaha DPX-830 User manual
suomi: Yamaha DPX-830 Ohjekirja
Deutsch: Yamaha DPX-830 Benutzerhandbuch
italiano: Yamaha DPX-830 Manuale utente
svenska: Yamaha DPX-830 Användarmanual
dansk: Yamaha DPX-830 Brugermanual
Nederlands: Yamaha DPX-830 Handleiding

Yamaha DPX-830 Manual de utilizare

Acest manual este potrivit și pentru

Yamaha DPX-830 Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente