Akai CT-2107ASF Manual de utilizare

Categorie
Televizoare CRT
Tip
Manual de utilizare
Please read this manual carefully before operation.
COLOR TELEVISION
RECEIVER
OPERATION MANUAL
CT-2108APF
AKAI - JAPAN
BEFORE OPERATION
Dear Customer:
Congratulations! You have purchased one of the finest Color TV's on the market!
This manual will help you use many exciting and useful features to make your TV viewing more enjoyable than
ever before.
Before operating your TV set, please read all these safety and operating instructions completely and then retain
for future reference.
Customer's Record
You will find the model number and chassis number on the back of your TV set.
Record these numbers in the spaces provided below.
Refer to them whenever you call upon your dealer regarding this product.
Model Number: Chassis Number:________________
Safety Precautions
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
CAUTIONS:
TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD
RECEPTACLE OR OTHER OUTLET UNLESS THE PRONGS CAN BE FULLY INSERTED INTO THE OUTLET
TO PREVENT ANY EXPOSURE OF THE PRONGS ON THE POLARIZED PLUG.
Avoid displaying stationary images on your TV screen for extended periods of time. Stationary patterns
generated by computer displays, video games, stock market reports, etc .can become permanently engrained
on the picture tube. This damage is not protected by your warranty as it is the result of misuse. Should you
wish to use your Television to display still images, it is always advisable to reduce brightness and contrast
settings. Never leave a video game or computer display unattended.
NOTE TO CABLE INSTALLER:
The cable ground shall be connected to the grounding system of the building, as close to the point of cable entry
as practical.
Important Safety instructions
CAUTION
PLEASE READ THESE INSTRUCTIONS, KEEP THESE INSTRUCTIONS AND HEED ALL WARNINGS.
FOLLOW ALL INSTRUCTIONS.
Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to
assure your personal safety. However improper use can result in potential electrical shock or fire hazards. In
order not to defeat the safe guards incorporated in this TV set, observe the following basic rules for antenna/TV
installation, use and servicing. All operating and use instructions should be followed.
Do not remove the cabinet cover. This may expose you to dangerous voltages. Refer all servicing to
qualified service personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER SER-
VICING TO QUALIFIED SERVICE PERSONNEL.
The lightning symbol in the triangle tells
you that the voltage inside this product
may be strong enough to cause an electric
shock. DO NOT TRY TO SERVICE OR
CHANGE THIS PRODUCT YOURSELF.
The exclamation point in the triangle tells
you that important operating and mainte-
nance instructions follow this symbol.
Mains plug is used as disconnect device and it shall remain readily operable.
I
BEFORE OPERATION
Power Sources-The TV set should be operated only from the type of power source indicated on the TV set or
as indicated in the Operation Manual. If you are not sure of the type of power supply in your home, consult your
sales person or your local power company. For TV sets designed to operate from battery power, or other
sources, refer to the operating instructions.
Grounding or Polarization - Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
Alternate Warnings-This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are
unable to insert the plug into the outlet, contact your electrician to have a suitable outlet installed. Do not defeat
the safety purpose of the grounding plug.
Water and Moisture Warnings-Do not use the TV set near water-for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. The TV set shall not be
exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the TV set.
Ventilation-Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the
TV set and to protect it from overheating, and these openings must not be blocked or covered. The openings
should never be blocked by placing the TV set on a bed, sofa, rug, or other similar surface. This TV set should
not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
Heat - Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Power-Cord Protection-Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Accessories-Do not place the TV set on an unstable cart, stand, tripod, bracket, or table. The TV set may fall,
causing serious injury to a child or adult, and serious damage to the TV set. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or accessory recommended by the manufacturer, or sold
with the TV set, and should use a mounting accessory recommended by the manufacturer.
A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces
may cause the TV set and cart combination to overturn.
Overloading- Do not overload wall outlets, extension cords or integral convenience receptacles as this can
result in fire or electric shock.
Lightning-For added protection for this TV set during a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will
prevent damage to the product due to lightning and power-line surges.
Object and Liquid Entry-Never push objects of any kind into the TV set through openings as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any
kind on the TV set.
Precautions (continued)
Cleaning-Unplug the TV set from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or
aerosol cleaners. Use a dry cloth for cleaning the exterior of the TV set.
II
BEFORE OPERATION (continued)
Precautions (continued)
Attachments-Do not use attachments not recommended by the product manufacturer as they may cause
hazards or electric shock.
If a snapping or popping sound from a TV set is heard continuously or frequently while the TV set is operated,
unplug the TV set and consult your dealer or service technician. It is normal for some TV sets to make
occasional snapping or popping sounds, particularly when being turned on or off.
Damage Requiring Service-Unplug the TV set from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. If the power cord or plug is damaged or frayed.
b. If liquid has been spilled or objects have fallen into the TV set.
c. If the TV set has been exposed to rain or water.
d. If the TV set has been subject to excessive shock by being dropped, or the cabinet has been damaged.
e. If the TV set does not operate normally by following the operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to restore the TV set to its nor
mal operation.
f. When the TV set exhibits a distinct change in performance-this indicates a need for service.
Warning: This unit should only be serviced by an authorized and properly trained technician. Opening the cover
or other attempts by the user to service this unit may result in serious injury or death from electrical shock, and
may increase the risk of fire.
Servicing-Do not attempt to service the TV set yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Replacement Parts-When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the original parts. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
Safety Check-Upon completion of any service or repairs to the TV set, ask the service technician to perform
routine safety checks to determine that the TV set is in proper operating condition.
When the TV set reaches the end of its useful life, improper disposal could result in a picture tube implosion.
Ask a qualified service technician to dispose of the TV set.
ANTENNA
Outdoor Antenna Grounding-if an outdoor antenna is installed, follow the precautions below. An outdoor antenna
system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or
where it can come in contact with such power lines or circuits.
WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN TO
KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM IS ALMOST
INVARIABLY FATAL
Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up
static charges.
This symbol indicates that this product incorporates double insulation between Hazardous mains
voltage and user accessible parts. When servicing use only Identical replacement parts.
III
CONTENTS
INTRODUCTION
Remote Control Keys .................................................................................................................................1
INSTALLATION
To Connect the Antenna ............................................................................................................................2
Installing the Remote Control Batteries .....................................................................................................2
To Connect External Equipment ................................................................................................................ 3
GENERAL OPERATION
Power On/Off .............................................................................................................................................4
MENUS OPERATION
Menus ........................................................................................................................................................5
Tune Menu .................................................................................................................................................5
Picture Menu ..............................................................................................................................................7
Sound Menu ...............................................................................................................................................7
Setup Menu ................................................................................................................................................8
Timer Menu ................................................................................................................................................9
TELETEXT OPERATION .......................................................................................................10
TROUBLESHOOTING GUIDE ..............................................................................................10
Note:
1Designs are subject to change without notice.
2All the pictures used in this operation manual are just used for reference, and may be different with
practicality.
INTRODUCTION
Remote Control Keys
Notes:
1When in operation, please point your remote control directly to the infrared sensor.
2Do not expose the remote control to impacts, water or disassemble it.
3The function buttons which marked with * may not be available due to the chassis functions.
1
DISP
TEXT
INDEX
REVEAL
SIZE
EAST WEST/
MIX
CANCEL
HOLD
SUBCODE
DIGIT
SLEEP
ZOOM
PMODE.
SMODE.
SOUND
PICTURE
TIMER
TUNE
SETUP
SCAN
STANDBY
MUTE
TV/AV SELECT
SLEEP TIMER
CHANNEL AUTO SCAN
DIRECT SELECT
DIGIT SELECT
ON-SCREEN DISPLAY
RECALL
MENU SELECT
VOLUME UP
VOLUME DOWN
SETUP MENU
CHANNEL UP
CHANNEL DOWN
PICTURE MODE SELECT
*ZOOM SWITCH
FASTMENU SELECT IN TV MODE
*SOUND MODE SELECT
*TELETEXT FUNCTIONS
(OPTIONAL)
*TELETEXT FUNCTIONS
(OPTIONAL)
INSTALLATION
Please read the safety instructions in this manual completely before installation.
Install your TV in an area where direct sunlight will not fall upon the screen.
Soft, indirect light is best for television viewing.
Allow enough space (at least 4 in.) between the TV and any walls or enclosures for proper ventilation.
Optimum television viewing distance is 3-5 times the screen's size.
Auto-Degaussing
Color television can be easily affected by magnetism, which shows as color distortion on the screen. If your
TV is affected by nearby magnetic components or appliances, turn it off for a few minutes. The built-in
auto-degaussing circuit will eliminate the magnetic interference.
To Connect the Antenna
VHF
UHF
or Cable
VHF
UHF
75-ohm coaxial cable (not supplied)
300-ohm twin-lead cable (not supplied)
Antenna adapter
(not supplied)
RF Input
(back of TV unit)
Notes:
1. It is recommended that a 75 ohm coaxial cable be used in order to eliminate interference and noise
which may occur due to nearby radio transmissions.
2. The antenna cable should not be tied together with other wiring.
3. Set up a lightning rod and check it regularly when an outdoor antenna is used.
Installing the Remote Control Batteries
1. Remove the battery compartment lid.
2. Insert two AAA batteries (included). Make sure the positive (+) and negative (-) polarities are correctly
aligned.
3. Reattach the battery lid.
Notes:
1. Alkaline batteries are recommended for longer life.
2. Always replace both batteries at the same time.
3. Do not expose batteries to fire or break them open.
4. To avoid battery leakage, remove batteries from the remote control when it is not being used for a long
period of time.
U/V mixer
(not supplied)
2
3.
AV terminals on the side panel can not be used together with the SCART terminal on the rear panel
at the same time.
3
1.
Please turn off the power supply of the TV set and the external equipment before connection.
2. The side terminals may be easier to use with a camcorder.
VCR
AUDIO/VIDEO IN
DVD Player
SCART Cable
Coaxial Cable
ANTENNA IN
Video Cable
Audio Cable
SCART Cable
AV IN on the side panel
SCART terminal
Camcorder
SCART terminal
VCR
AUDIO/VIDEO IN
VCR
INSTALLATION (continued)
To Connect External Equipment
The followings are diagrams showing basic instructions for attaching external equipment, like a VCR or DVD
player, to your TV set. Please refer to operation manuals of external audio/video equipment that will be
connected to your set for additional instructions. PLEASE TURN OFF ALL POWER BEFORE CONNECTING
DEVICES TOGETHER.
Notes:
Connect VCR s RF OUT terminal to the RF IN jack I cated on the rear'oConnect VCR s RF OUT terminal to the RF IN jack I cated on the rear'o
AV
AV
VIDEO
AUDIO
AV IN
L
R
RF IN
GENERAL OPERATION
1POWER[On/Off]
Plug in the supply socket, and press the MAIN POWER SWITCH key on the TV. You may press any of the
STANDBY, Program Number (0-9) and CH-/+ keys on the remote control to turn on the TV.
To switch back to the Standby mode, press STANDBY key. You can also power off the TV directly by pressing
the MAIN POWER SWITCH key. Part of circuit on the TV remains active in the STANDBY mode. To cut off the
power off completely, please press the MAIN POWER SWITCH.
Auto off without signal received
When there is no signal received (for example, the program of a certain channel is over), the TV will switch to the
Standby mode if no key is pressed within 5 minutes. If you have set "Off Time" and the remaining time is less
than 5 minutes, Off Time will be carried out prior to AUTO OFF. At the last 5 minutes, it will hint per-min; and at
the last 1 minute, it will hint per-sec on the screen.
2Num Keys
a. To select channels
b. Press any number button to reset TV when it is standby,and the TV will turn to the right channel as the
number.
c. Press the number button to change AV mode to TV mode.
d. Input the page of sub code in txt mode.
e. Input the channel frequency in tune menu.
f. Input the password of the Hotel mode.
3[CH+/-]&[VOL+/-]
Press CH[+/-] to switch channels; Press the VOL-or VOL+ button to decrease or increase the volume. Adjustable
range: 0-63
During normal play, press the MUTE button and the sound is eliminated. The TV will display a picture
on the
screen. To cancel MUTE, you may press the MUTE button again or the VOL+ button.
4TV/AV Selection
In the TV mode, press the TV/AV button to enter the AV mode. In the AV mode, the TV receives AV signals from
external equipment. To resume broadcast viewing, press the TV/AV buttonCH-/CH+ buttons or Num keys.
To receive signals from external equipment, please select the relevant AV mode. In the hotel mode, if “AV lock” is
ON, there will be “locked” displayed on the screen when switch to AV mode.
5Channel Selection[-/--/---]
Pressing the CH-/CH+ buttons can select another lower-numbered or upper-numbered channel.
Direct selection
To select a one-digit channel number
Press the DIGIT button to choose "-" firstly, then press one of 0-9 buttons.
To select a two-digit channel number
Press the DIGIT button to choose "--" firstly, then enter a first-digit and second-digit. If only one digit is entered,
the channel will automatically shift to the digit related channel in three seconds.
To select a three-digit channel number
Press the DIGIT button to choose "---" firstly, then enter a first-digit, second-digit and third-digit. If only one or two
digits are entered, the channel will automatically shift to the digit (digits) related channel in three seconds.
Note: If you enter a number over 235, the channel will remain the current one.
6MUTE
Press the MUTE button to switch MUTE ON/OFF modes. The “MUTE ON” mode will display on the screen.
When there is no signal received in TV mode,the TV will be in MUTE ON mode.and there will be no sound output.
7PICTURE MODE
There are 4 picture modes to select. Press this button to switch userÎ soft Înature Îrich.
And the user mode can be regulated in the PICTURE MENU.
8DISPLAY
The displayed parts include the Signal Source; Color Sys;Sound Sys and so on.
9MENU
Press the MENU key and the main menu will display on the screen.To stop searching,you can press the MENU
key.
4
10RECALL
Press the RECALL button and the TV will directly skip back to the former program channel.
11SLEEP
This button is used to set fast off time, the adjustale range is 0,5,10,15,………120,0 minutes,press this button
repeatly,and you can select what time you want to set.
12SCAN
Press the SCAN button to scan programs from the current channel. To stop scanning and start the corresponding
operation, please press SCAN button again or any other buttons.
*13ZOOMIf the button does not function, it means this TV does not support this function.
Press the zoom button ,and the TV will switch between 43, 169 and zoom.
*14SOUND MODEIf the button does not function, it means this TV does not support this function.
There are 4 sound modes to select such as userÎnews Îmusic Îtheatre.
And the user mode can be regulated in the SOUND MENU.
MENUS OPERATION
Menus
Press the MENU button when watching TV programs, Press buttons to select and press buttons
to enter, then press the
buttons to adjust.
Menu display disappears 15 seconds after last selection.
Note: In the AV mode, TUNE menu is not available.
Tune Menu
This section gives descriptions about adjustment of items in the TUNE menu. This menu will display
Channel/Colour Sys/Sound Sys/Skip/Frequency/Fine Tune/Auto Search and Swap.
1. Channel
Press buttons to change the channels one by one.
2. Colour Sys
Press buttons to choose the Colour Sys, It is very important to set the correct colour system,suggest
to set it “Auto”.
3. Sound Sys
Press buttons to choose the Sound Sys.It is very important to set the correct sound system,otherwise
much boring noise will be heard.
4. Skip On/Off
After Auto Search, there may be some repeated program or inferior signals received. Skipping the undesired
program position can dramatically quicken channel selection.
After selecting "Skip" in the TUNE menu, press the
buttons to set "Skip On". When the TUNE menu
has disappeared, press the CH-/CH+ buttons and you will find the channel number skipped.
5
Channel 9
Colour Sys Auto
Sound Sys DK
Skip Off
Frequencyy 066 75MHZ.066 75MHZ.
Fine
TuneFine Tune
Auto
SearchAuto Search
Swap
TUNE
SELECT ADJUST
5. Search
In case the desired channel cannot be preset with the Auto Program function, or you would like to set the
desired channels to specific channel numbers, please use the Search function.
After selecting "Frequency" in the TUNE menu, press the
buttons. The TV searches another
lower/upper channel. To stop search, press the MENU button. You can also select the channel frequency
directly by using the Num buttons.
If the selected channel is not the one you want, press the buttons again until the desired channel is selected. If
the TV does not stop searching when finding a channel, please use the Fine Tune function.
6. Frequency Fine-tuning
After selecting "Fine Tune" in the TUNE menu, press the buttons until you get the best sound and
picture effect. Press the DISP button to check up the fine-tuned channel, and you will find that the position
number turns to yellow.
7. Auto Search
Before performing Auto Search, please affirm that the Sound System is correct. After selecting "Auto Search"
in the TUNE menu, press the
button. The TV will search automatically in sequence. After auto searching,
the TV will store receivable channels and returns to POS1.
Unused position number is automatically set to Skip On. During Auto Search, press the MENU button
to stop searching.
8. Swap
Use the SWAP function to resort program position. For example, you want to change Channel 9 to Channel 7.
a. Press the TUNE menu button to select the SWAP menu in the TV mode.
b. Press the
buttons to highlight "Channel A". Press the Numeric buttons to set it to 9. Then set channel B to
7 in the way mentioned above.
c. Select the SWAP menu, and press the
button. The current channel No. is changed to Channel 7 and the
content of Channel 7 is exchanged with that of Channel 9.
The current channel No. is Channel 7.
Repeat the operations mentioned above to sort other searched channel position as desired.
6
Search
VHF H-VHF H- Channel 11
67 75MHz
.67 75MHz.
:
DOWN: DOWN
UPUP
Auto Search
VHF H-VHF H- Channel 11
67 75MHz.67 75MHz.
MENU Stop:MENU Stop:
Channel AChannel A 99
Swap
Swap
SELECT ADJUST
Channel BChannel B
7
Picture Menu
1. Picture Mode Selection
Before shipment, the TV was given three preset picture modes: Soft, Nature and Rich. Press the
P. MODE button to select one of the three preset modes or the User mode.
Refer to the following table about each picture mode.
Mode Picture Quality
Soft
The contrast is low, suitable for watching TV in mild surrounding light.
Nature
Standard status, suitable for watching ordinary programs.
Rich The contrast is high, suitable for watching TV in bright environment.
User Picture quality user sets
available for NTSC DVD discs.
2. To adjust picture quality
To perform the following operation, press the MENU button or the picture menu button directly to select the
PICTURE menu. Press the
buttons to choose and Press the buttons to adjust the digital level of
the selected adjustment as desired.
The adjusted picture level is automatically stored in the User position.
Sound Menu
On the Sound Menu mode ,press the
buttons to choose the parts you want to changethen press the
buttons to change.
NOTE: If there is no BASSTREBLE or LOUDNESS selection on the menu, it means this TV does
not support those functions.
Note : There is no Tint function under PAL or SECAM system for some chassis.
The adjustable “Tint” range is –31-+31, 0” is the normal value. Under DVD mode, "Tint" function is not
7
Contrast 32
Brightness
PICTURE
SELECT ADJUST
Color
32
32
Sharpness
Tint
Skin
ToneSkin Tone
32
0
Off
Volume 32
Treble
SOUND
SELECT ADJUST
Bass
32
32
Loudness
On
Setup Menu
To perform the following operation, press the MENU button or the SETUP button directly to select the SETUP
menu.
NOTE If there is no AVL or DEGAUSS selection on the menu, it means this TV does not support those
functions.
1. Language
Press buttons to select languages.
2. Blue Background
With this function on, the screen will display a mild blue background and mute automatically in TV mode
when no signal is received.
3. Picture Improve
It is recommended to select "picture improve on" to acquire better picture effect.
4. Color temperature adjustment
You may select one of color of background as preferred among normal, Cool and Warm mode. The
adjusted Color Temp mode is automatically stored and remains unchanged until next adjustment.
5. Child lock
The keyboard will be locked when Child lock is “ON”, and it will be cancelled by keeping on pressing the
MENUon the keyboardbutton for 10 seconds.
If the Child Lock is ON under standby mode, you can turn on the TV by pressing the menu button on the
TV set for 10 seconds. The Child Lock will remain “ON” after TV turned on.
6. Hotel mode
Only after entering the correct password by pressing Numeric buttons, you can adjust the following items.
8
Language English
Pic
ImprovePic Improve
SETUP
SELECT ADJUST
Blue ScreenBlue Screen
On
On
Color TempColor Temp
Normal
AVL Off
Hotel
modeHotel mode
Child LockChild Lock
Off
Degauss
Password - - - -----
AV
LockAV Lock
Hotel mode
SELECT ADJUST
Tuning LockTuning Lock
Off
Off
Max volume.Max volume.
63
New PasswordNew Password - - - -----
Clear
AllClear All
Channel LockChannel Lock
Off
(Each time you power on the TV or quit the menu, you need entering the password)
Initial password: 0000 (preset before outgoing)
Universal password: 8888
Tuning lock: To allow/prohibit program (searching program). With Channel Lock ON, the item is also set to
ON.
AV Lock: To prohibit watching AV program; there is a “locked” displayed on the screen.
Maximum Volume: To adjust volume to maximum.
New Password: Enter new password twice and you may change original password, “----”changes into green
means your new password has been set successfully.
Channel Lock: To lock current channel. Generally the Hotel TV does not allowed guests to change setting.
With Tuning Lock ON, the TUNE and SWAP menus are not available.
Clear AllAll the lock setting will be cancelled except “AV Lock”.
To press the MENU button to return the up-menu.
Timer Menu
In the STANDBY or TURN ON mode, the TV can automatically complete some functions such as turn-on,
channel preset and turn-off as desired.
TIMER menu.
1. On/Off timer
Clock: You can enter the current exact time or relative time; Hour entering range is “00 to 23”.
Minute entering range is 00 to 59;
On time 1: one kind of on time. After on timer is performed, the on timer is cleared.
On channel 1: one kind of on channel, press
to select channel.
On time 2: the other kind of on time. After on timer is performed, the on timer is cleared.
On channel 2: another kind of on channel, press
to select channel.
Off timer: You can set the time of off time. After off timer is performed, the off timer is cleared.
You may preset two kinds of On Time and On Channels.
2. Sleep timer
After selecting "Sleep Time", press the buttons to set Sleep time to 5, 10, 15, 20……… 120 minutes or
0.
Notes:
If both the SLEEP TIMER and OFF TIMER are set, the TV will perform the setting with less remaining time prior to
another. The SLEEP function is cancelled at the same time when the OFF TIMER is performed.
To perform the following operation, press the MENU button or the TIMER button directly to select the
9
Clockk0000:00 00:
On
Channel 1On Channel 1
TIMER
SELECT ADJUST
On Time 1On Time 1
--
: ----:--
0
On
Time 2On Time 2
--
: ----:--
On
Channel 2On Channel 2 00
Sleep
TimeSleep Time
Off
TimerOff Timer
--
: ----:--
0
TELETEXT OPERATION (selectable)
If the following described buttons do not function, it means this TV does not support those functions
The TV can receive various TELETEXT signals, including news, weather forecast and stock market quotation,
which is convenient for your operation.
1. TELETEXT on/off
Press the TEXT button firstly to enter the TEXT mode. Press the button again to quit from the TEXT mode
and resume broadcasting view.
2. Check up TELETEXT
1) Page selection Press the Numeric buttons to enter first-digit, second-digit and third-digit page No. in
turn. If a wrong number is entered, reenter the correct number after finishing the wrong numbers.
2) Press the
buttons to select the next or previous page.
3) Fast page selection
Every Color button on the remote control is corresponding to the same color page number appearing at the
bottom of the current screen. Press the Color buttons to select pages quickly as shown below:
Red button - To read the link page or next page
Green button - To read the link page or next second page
Yellow button - To read the link page or next third page
Blue button - To read the link page or previous page
4) Other functions
INDEX- To return to Index Page
REVEAL- To check up the concealed information on the current page
SIZE - To enlarge the current page size
EAST/WEST- To select the TELETEXT language
MIX- To turn on/off TELETEXT background
CANCEL - Note that when a newsflash or subtitle page arrives for the first time after being requested, or is
SUBCODE- To check the current page for appendix (To display "txt clock" when not in TXT mode)
TROUBLESHOOTING
Symptoms
Check the following items
Picture Sound
No picture No sound
1. Make sure the power cord is plugged in.
2. Check if the MAIN POWER SWITCH is pressed or not.
3. Check if the levels of Contrast, Brightness and Volume are set to
minimum.
Normal No sound
Check if the TV is in the MUTE mode or the volume is minimum.
Try pressing the VOL+ button.
Normal Check if the chroma is set to minimum.
No color
With noise
Check if the sound/color system is correct.
With stripes With noise
The TV set is interfered by electric waves from automobiles, motors,
neon lights, etc.
With snow With noise
1. Check if the antenna cable is broken or disconnected.
2. Check if the antenna direction has changed.
Ghost picture
Normal
Check if the antenna direction has changed.
Unclear picture
Normal or weak
Preset channels again.
With spots Normal
1. The TV is moved with power on.
2. Check if magnetic objects are put near the set.
The remote control doesn't work.
The batteries are exhausted or improperly installed.
u
pdated, Cancel display is automatically cancelled in favor of TEXT display
TELETEXT page display
HOLD - To still the current
10
CT-2108APF
MANUAL DE INSTRUCTIUNI
TELEVIZOR COLOR
Cititi acest Manual inainte de utilizarea aparatului.
AKAI - JAPAN
INAINTEA INSTALARII
Draga Utilizator:
Felicitari! Ai achizitionat unul dintre cele mai bune televizoare color existente pe piata!
Acest manual te va ajuta sa te bucuri de toate functiile acestui aparat facandu-ti privitul la televizor mult mai placut
decat a fost vreodata!
Inainte de a instala aparatul dvs. va rugam sa cititi cu atentie aceste instructiuni si sa le retineti pentru utilizarile
viitoare.
Precautii privind siguranta utilizarii:
ATENTIE: PENTRU A EVITA INCENDIUL SAU SOCUL ELECTRIC NU EXPUNETI ACEST APARAT
IN
PLOAIE SAU IN ZONE CU UMEZEALA.
ATENTIE
RISC DE SOC ELECTRIC
NU DESCHIDETI
ATENTIE: PENTRU A REDUCE RISCUL DE SOC
ELECTRIC, NU DEMONTATI CAPACUL DIN SPATE AL
APARATULUI. ADRESATI-VA DOAR PERSONALULUI
CALIFICAT DE LA SERVICE-UL AUTORIZAT.
ATENTIE:
Simbolul fulgerului cu sageata incadrat intr-un
triunghi alerteaza utilizatorul asupra prezentei in
interiorul aparatului a unui voltaj ridicat care poate
fi de o magnitudine suficienta pentru a construi
un risc marit de electrocutare.
Semnul exclamarii incadrat intr-un triunghi,
avertizeaza utilizatorul de prezenta unui echipament
sensibil aflat in interiorul aparatului.
Alimentarea cu tensiune mai mare decat cea specificata sau taierea,innodarea sau/si prelungirea cablului de
alimentare pot duce la electrocutare sau incendiu.
Evitati expunerea pe ecran a unor imagini stationare pentru o peroiada de timp indelungata. Imagimile statice de
genul celor generate de display-ul calculatoarelor, jocuri video, etc. pot ramande impregnate permanent in tubul de
imagine. Aceasta defectiune nu este acoperita de garantie fiind rezultatul unei folosiri necorespunzatoare. Daca
totusi doriti sa expuneti imagini statice pe ecran, va sfatuim sa reduceti setarile de luminozitatea si contrast.
Atentionare privind cablul de alimentare:
Cablul de alimentare trebuie conectat la sistemul de impamantare al cadirii.
Instructiuni de siguranta:
ATENTIE
CITITI ACESTE INSTRUCTIUNI, PASTRATI ACESTE INSTRUCTIUNI, DATI ATENTIE ACESTOR
INSTRUCTIUNI, URMATI TOATE INSTRUCTIUNILE.
Acest aparat a fost produs pentru a va asigura siguranta folosirii. Cu toate acestea, o utilizare necorespunzatoare
poate duce la electrocutare sau incendiu.
Nu demontati capacul din spate al aparatului. Astfel riscati sa va expuneti uni voltaj foarte mare. Adresati-va doar
personalului calificat de la service-ul autorizat.
Asigurati-va ca stingeti televizorul inainte sa scoateti cablu de alimentare din priza.
I
INAINTEA INSTALARII
Precautii privind siguranta utilizarii: (continuare)
Sursa de alimentare – TV trebuie conectat doar la sursa de curent indicata pe aparat sau in maualul utilizare.
Daca nu sunteti sigur de sursa dvs. de alimentare adresati-va vanzatorului dvs. sau companiei de electricitate.
Impamantarea nu ignorati importanta prizei cu impamantare. O priza cu impamantare are in plus doua lame de
metal necesare pentru siguranta dvs.
Priza – stecherul televizorului dvs se va potrivi doar unei prize cu impamantare. Aceasta este o masura pentru a
asigura siguranta dvs. Aveti grija sa nu conectati mai multe cabluri de alimentare in aceeasi priza unde conectati
TV, pentru a preveni aparitia focului sau a socurilor electrice.
Apa si umezeala - Nu amplasati aparatul in medii cu umezeala sau ploaie pentru a evita socurile electrice.
Ventilarea - Nu blocati orificiile de ventilatie ale aparatului. Ventilatia este necesara pentru a preveni defectarea
componentelor electrice.
Caldura - Aparatul trebuie amplasat departe de fereastra sau alte surse de caldura. Nu asezati televizorul
deasupra unei surse de caldura, cum ar fi un video player sau un Amplificator audio. Nu puneti pe aparat obiecte
care produc foc, cum ar fi o lampa aprinsa. Protejati televizorul de razele solare pentru a evita deteriorarea cranului.
Cablul de alimentare - Cablul electric trebuie pozitionat in asa fel incat sa nu fie strivit de talpa televizorului, acesta
putand fi perforat. Atunci cand televizorul CRT nu este folosit pentru o perioada mai lunga de timp, este recomandat
sa se deconecteze aparatul de la sursa de alimentare.
Pozitionarea - Nu pozitionati aparatul pe o suprafata instabila. Daca aparatul cade pot aparea leziuni seriose
persoanelor din preajma si aparatul se poate deteriora. Daca aparatul va fi amplasat intr-un loc stramt, distanta
minima dintre aparat si perete trebuie respectata. Supraincalzirea aparatului poate minimiza durata de functionare a
aparatului, si de asemenea poate fi periculos pentru dvs.
Furtuna - In timpul unei furtuni, pentru siguranta dvs. nu atingeti partile principale ale aparatului sau antena.
Obiectele si lichidele - Nu scapati sau impingeti obiecte in capacul din spate al aparatului sau in orificiul de
aerisire. Nu varsati nici un fel de lichid pe televizor. Nu introduceti nimic in orificiul de ventilatie al aparatului, daca
intra obiecte de metal sau ceva inflamabil exista riscul aparitiei focului. Nu puneti obiecte pe aparat, ecranul
televizorului poate fi afectat. Nu aruncati cu nimic in televizor. Sticla ecranului poate exploda si poate cauza leziuni
serioase persoanelor din preajma.
Manipularea - Mutati aparatul exact cum vi se recomanda, cu ajutorul a doua sau a mai multor persoane. Nu va
sprijiniti de aparat, nu va aplecati peste el sau sa nu impingeti aparatul cand sta in picioare. Atentie la copii. Daca
aparatul cade pot aparea leziuni serioase.
Curatarea - nu folositi dizolvanti, precum benzene, pentru a curata televizorul deoarece va afecta suprafata.
Scoateti aparatul din priza inainte de a curata ecranul. Praful se va sterge cu o laveta moale. Daca ecranul necesita
o curatare mai profunda folositi o laveta umeda. Nu folositi lichid sau spray de curatat.
II
INAINTEA INSTALARII
Precautii privind siguranta utilizarii:
(continuare)
Defecte pentru care trebuie sa va adresati service-ului – scoateti aparatul din priza si adresati-va service-ului
autorizat in una din urmtoarele situatii:
a.daca stecherul sau cablul de alimentare sunt avariate.
b.daca in interiorul aparatului a patruns orice lichid sau obiect.
c.daca aparatul a fost expus ploii.
d.daca televizorul a fost supus unor socuri puternice sau carcasa este Sparta.
e.daca aparatul nu functioneaza corect, in conformitate cu instructiunile de operare.
f. daca televizorul demonstreaza schimbari drastice de performanta.
Avertisment - asupra acestui acestui aparat trebuie sa intrevina doar persoane specializate si instruite ca atare.
Deschiderea capacului din spate sau alte intervenii asupra televizorului se pot solda cu rani grave sau cu
electrocutare si poate creste riscul de producere a incendiilor.
Inlocuirea pieselor – atunci cand este necesara schimbarea unor piese fiti sigur ca tehnicianul a utilizat aceleasi
piese cu cele originale sau cu piese ce au aceleasi caracteristici. Utilizarea pieselor neautorizate poate avea ca
efect socul electric sau incendiul.
Controlul de securitate – atunci cand asupra televizorului s-a intervenit, rugati tehnicianul sa va faca un control
de rutina pentru a va demonstra ca este in stare normala de functionare.
Acest simbol indica faptul ca acest aparat are dubla izolatie intre tensiunile periculoase.
III
INTRODUCERE
CUPRINS
TELECOMANDA..................................................................................................................................1
INSTALAREA
Conectarea
antenei…………………………………………........................................................................................2
Instalarea bateriilor in
telecomanda………………… ..............................................................................................................2
Conectarea echipamentelor
externe ...............................................................................................................................................3
OPERATII GENERALE
Pornirea si Oprirea
aparatului……………….......................................................................................................................4
MENIUL DE OPERARE
Meniul
principal………….................................................................................................................................5
Setarea programelor ……...................................................................................................................5
Meniul
Imagine...............................................................................................................................................7
Meniul Sunet.......................................................................................................................................7
Meniul Setari.......................................................................................................................................8
Meniul
Timp....................................................................................................................................................9
TELETEXT…………………………….................................................................................................
10
Ghid defecte…………………….........................................................................................................10
NOTA :
AKAI isi rezerva dreptul de a schimba design-ul si specificatiile fara notificare.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Akai CT-2107ASF Manual de utilizare

Categorie
Televizoare CRT
Tip
Manual de utilizare

în alte limbi