LG FH4U2TDH1N Manual de utilizare

Categorie
Mașini de spălat
Tip
Manual de utilizare
DWG.
No.
TRIG.
DR COMPLETED
LG Electronics Inc.
UNIT SCALE
N
S
mm
REVIEWEDDESIGNED
RELATED DWG.
CHECKED APPROVED
29.08.2016
MODELING
I
T
L
E
T
APPROVEDPREPAREDDATEREF. NO.REV. NO. REVISION DESCRIPTION
1
2
3
4
RELEASING THIS DRAWING
WITHOUT PERMISSION LG
Electronics SHOULD BE
ACCUSED ACCORDING TO THE
LAWS AND COMPANY RULES.
PDF
ILLUSTRATOR
148 148
210
MFL69485508
MANUAL,OWNER’S
DRUM-EXPORT1/1
MFL69495508
1. Material, printing and exterier size are refer to work tables.
2. Printing, text size and line are based on LG design film.
3. Exterier size on the drawing is cutting line.
4. Before product controlled by criteria sample.
WORK
BRAND
LG
01
CUSTOMER MODEL
MFL69495508
P/NO.
1
LANGUAGE
384
PAGE
REMARK
SEC.
should comply with LG standard of LG(63)-A-5501-34
ENGLISH
HUNGARAIAN
BULGARIAN
CROATIAN
OFFSET WHITE 80 g
LGEWR
A.Walaszczyk
29.08.2016 29.08.2016 29.08.2016
M.Grabek S.Kozłowski N.Kim
A**QCMR
Titan Classic Hybrid
Washing Machine
SERBIAN
ALBANIAN
MACEDONIAN
ROMANIAN
FH4U2TDH1N
F H/1 U2TDH(W)(0~9)(N)
A**QWMR
OWNER'S MANUAL
WASHING
MACHINE
Before beginning installation, read these instructions carefully.
This will simplify installation and ensure that the product is installed
correctly and safely. Leave these instructions near the product after
installation for future reference.
MFL69495508
Rev.00_03082016
www.lg.com
EN ENGLISH HU HUNGARIAN BG BULGARIAN HR CROATIAN
SR SRPSKI SQ SHQIPE MK ΜΑΚΕΔΟΝΊΑ RO ROMÂNĂ
F H/1 4U2TDH(W)(0~9)(N)
TABLE OF CONTENTS
This manual may contain images or content
different from the model you purchased.
This manual is subject to revision by the
manufacturer.
SAFETY INSTRUCTIONS ......................................03
Important Safety Instructions .......................................................04
Disposal of Your Old Appliance ...................................................07
INSTALLATION .......................................................08
Parts ............................................................................................08
Accessories .................................................................................08
Specifications ..............................................................................09
Installation Place Requirements .............
.....................................10
Unpacking and Removing Transit Bolts ....................................... 11
Using Anti-Slip Sheets (Optional) .............
...................................12
Wooden Floors (Suspended Floors) ............................................12
Leveling the Appliance .................................................................13
Connecting the Supply Hose .............
..........................................13
Installing the Drain Hose .............................................................16
Electrical Connections (In the UK Only) ......................................16
OPERATION ...........................................................17
Using the Washing Machine ........................................................17
Sorting Laundry ...........................................................................18
Adding Cleaning Products ...........................................................19
Control Panel ...............................................................................21
Programme Table ........................................................................22
Option Programme ......................................................................27
Using Smart Function (Optional)
.................................................30
MAINTENANCE ......................................................31
Cleaning Your Washing Machine .................................................31
Cleaning the Water Inlet Filter .....................................................31
Cleaning the Drain Pump Filter ...................................................32
Cleaning the Dispenser Drawer ...................................................33
Tub Clean (Optional) ...................................................................33
Caution on Freezing During Winter .............
................................34
TROUBLESHOOTING ............................................37
Diagnosing Problems ..................................................................37
Error Messages ...........................................................................40
WARRANTY ............................................................42
OPERATING DATA .................................................45
Dry (Optional) .............................................................................
29
Using the Smart Diagnosis™ Function .......................................36
03
SAFETY INSTRUCTIONS
The following safety guidelines are intended to prevent unforeseen risks or
damage from unsafe or incorrect operation of the product.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described
below.
This symbol is displayed to the indicate matters and operations that
can cause risk. Read the part with this symbol carefully and follow the
instructions in order to avoid risk.
WARNING
- This indicates that the failure to follow the instructions
can cause serious injury or death.
CAUTION
- This indicates that the failure to follow the instructions
can cause the minor injury or damage the product.
To reduce the risk of re, electric shock, or injury to persons when using
your product, basic safety precautions should be followed, including the
following:
Children in the Household
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Children should be supervised to
ensure that they do not play with the appliance.
For Use in Europe:
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
Children of less than 3 years should be kept away unless continuously supervised.
WARNING
EN
04
Important Safety Instructions
To reduce the risk of re, electric shock, or injury to persons when using
your product, basic safety precautions should be followed, including the
following:
Installation
Never attempt to operate this appliance if it is damaged, malfunctioning, partially
disassembled, or has missing or broken parts, including a damaged cord or plug.
This appliance should only be transported by two or more people holding the
appliance securely.
Do not install the appliance in a damp and dusty place. Do not install or store the
appliance in any outdoor area, or any area that is subject to weathering conditions
such as direct sunlight, wind, rain, or temperatures below freezing.
Tighten the drain hose to avoid separation.
If the power cord is damaged or the hole of the socket outlet is loose, do not use
the power cord and contact an authorized service centre.
This appliance must not be installed behind a lockable door, a sliding door or a
door with a hinge on the opposite side to that of the appliance, in such a way that
a full opening of the appliance door is restricted.
Do not plug multiple socket outlets, an extension power cable or adapter with this
appliance.
This appliance must be grounded. In the event of malfunction or breakdown,
grounding will reduce the risk of electric shock by providing a path of least
resistance for electric current.
This appliance is equipped with a power cord having an equipment-grounding
conductor and a grounding power plug. The power plug must be plugged into an
appropriate socket outlet that is installed and grounded in accordance with all local
codes and ordinances.
Improper connection of the equipment-grounding conductor can result in risk of
electric shock. Check with a qualied electrician or service personnel if you are in
doubt as to whether the appliance is properly grounded.
Do not modify the power cord provided with the appliance.If it does not t the
outlet, have a proper outlet installed by a qualied electrician.
WARNING
EN
05
Operation
Do not use a sharp object like drill or pin to press or separate an operation unit.
Do not repair or replace any part of the appliance. All repairs and servicing must
be performed by qualied service personnel unless specically recommended in
this Owners Manual. Use only authorized factory parts.
Keep the area underneath and around your appliances free of combustible
materials such as lint, paper, rags, chemicals, etc.
Do not put animals, such as pets into the appliance.
Do not leave the appliance door open. Children may hang on the door or crawl
inside the appliance, causing damage or injury.
Use new hose or hose-set supplied with the appliance. Reusing old hoses can
cause a water leak and subsequent property damage.
Never reach into this appliance while it is operating. Wait until the drum has
completely stopped.
Do not put in, wash or dry articles that have been cleaned in, washed in, soaked
in, or spotted with combustible or explosive substances (such as wax, oil, paint,
gasoline, degreasers, drycleaning solvents, kerosene, vegetable oil, cooking oil,
etc.). Improper use can cause re or an explosion.
In case of ood, disconnect the power plug and contact the LG Electronics
customer information centre.
Do not push down on the door excessively, when the appliance door is open.
Do not touch the door during steam or drying programmes.
Do not use ammable gas and combustible substances (benzene, gasoline,
thinner, petroleum, alcohol, etc.) near the appliance.
If the drain hose or supply hose is frozen during winter, use it only after thawing.
Keep all washing detergents, softener and bleach away from children.
Do not touch the power plug or the appliance controls with wet hands.
When pulling out the power plug from an outlet, hold the power plug, not the cable.
Do not bend the power cable excessively or place a heavy object on it.
Do not wash rugs, mats, shoes or pet blankets, or any other items other than
clothes or sheets, in this machine.
EN
06
This appliance must only be used for domestic household purposes and should
not be used in mobile applications.
If there is a gas leakage (isobutane, propane, natural gas, etc.), do not touch the
appliance or power plug and ventilate the area immediately.
Maintenance
Securely plug the power plug in the socket outlet after completely removing any
moisture and dust.
Disconnect the power cord before cleaning the appliance.
Never unplug the appliance by pulling on the power cable. Always grip the power
plug rmly and pull straight out from the socket outlet.
Do not spray the water inside or outside the appliance to clean it.
Disposal
Before discarding an old appliance, unplug it. Cut off the cable directly behind the
appliance to prevent misuse.
Dispose of all packaging materials (such as plastic bags and styrofoam) away from
children. The packaging material can cause suffocatoions.
Remove the door before disposing of or discarding this appliance to avoid the
danger of children or small animals getting trapped inside.
EN
07
Disposal of Your Old Appliance
This crossed-out wheeled bin symbol indicates that waste electrical and
electronic products (WEEE) should be disposed of separately from the
municipal waste stream.
Old electrical products can contain hazardous substances so correct
disposal of your old appliance will help prevent potential negative
consequences for the environment and human health. Your old appliance
may contain reusable parts that could be used to repair other products,
and other valuable materials that can be recycled to conserve limited
resources.
You can take your appliance either to the shop where you purchased
the product, or contact your local government waste ofce for details of
your nearest authorised WEEE collection point. For the most up to date
information for your country please see www.lg.com/global/recycling.
EN
08
INSTALLATION
Parts
Transit bolts
Power plug
Drawer
Control panel
Drum
Door
Drain hose
Drain plug
Drain pump lter
Cover cap
(Location may
vary depending on
products)
Adjustable feet
Accessories
Cold supply hose (1EA)
(Option: Hot (1EA))
Spanner Anti–slip sheets (Optional)
EN
09
Model
Wash Capacity 8 kg (Wash)/ 5kg (Dry)
Power Supply 220 - 240 V~, 50 Hz
Size 600 mm (W) x 560 mm (D) x 850 mm (H)
Product Weight 68 kg
Permissible Water pressure 0.1 - 1.0 MPa (1.0 - 10.0 kgf / cm²)
ve the quality of the product.
The external hot water supply MUST NOT exceed 65°C
ter supply.
F H/1 4U2TDH(W)(0~9)(N)
EN
10
Installation Place Requirements
Location
10
cm
2
cm
2
cm
Level Floor :
Allowable slope under the entire appliance
is 1°.
Power Outlet : Must be within 1.5 meters of either side
of the location of the appliance.
Do not overload the outlet with more than one
appliance.
Additional Clearance : For the wall, 10 cm: rear
/2 cm: right & left side
Do not place or store laundry products on top of the
appliance at any time.
These products may damage the nish or controls.
WARNING
The plug must be plugged into an appropriate outlet
that is properly installed and grounded in accordance
with all local codes and ordinances.
Positioning
Install the appliance on a at hard oor.
Make sure that air circulation around the appliance is
not impeded by carpets, rugs, etc.
Never try to correct any unevenness in the oor with
pieces of wood, cardboard or similar materials under
the appliance.
If it is impossible to avoid positioning the appliance
next to a gas cooker or coal burning stove, an
insulation (85x60 cm) covered with aluminum foil on
the side facing the cooker or stove must be inserted
between the two appliances.
Do not install your appliance in rooms where freezing
temperatures may occur. Frozen hoses may burst
under pressure. The reliability of the electronic control
unit may be impaired at temperatures below freezing
point.
Ensure that when the appliance is installed, it is
easily accessible for an engineer in the event of a
breakdown.
With the appliance installed, adjust all four feet
using the transit bolt spanner provided to ensure the
appliance is stable, and a clearance of approximately
20 mm is left between the top of the appliance and the
underside of any work-top.
If the appliance is delivered in winter and temperatures
are below freezing, place the appliance at room
temperature for a few hours before putting it into
operation.
WARNING
This equipment is not designed for maritime use or for
use in mobile installations such as caravans, aircraft
etc.
Electrical Connection
Do not use an extension cord or double adapter.
Always unplug the appliance and turn off the water
supply after use.
Connect the appliance to an earthed socket in
accordance with the current wiring regulations.
The appliance must be positioned so that the plug is
easily accessible.
Repairs to the appliance must only be carried out
by qualied personnel. Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning. Contact your local service centre.
EN
11
Unpacking and Removing Transit
Bolts
1
Lift the appliance off the foam base.
After removing the carton and shipping material,
lift the appliance off the foam base. Make sure
the tub support comes off with the base and is
not stuck to the bottom of the appliance.
If you must lay the appliance down to remove
the carton base, always protect the side of the
appliance and lay it carefully on its side. Do not
lay the appliance on its front or back.
Tub support
(Optional)
Carton base
2
Remove the bolt assemblies.
Starting with the bottom two transit bolts, use the
spanner (included) to fully loosen all transit bolts
by turning them counterclockwise. Remove the
bolt assemblies by wiggling them slightly while
pulling them out.
Retainer
Shipping
bolt
3
Install the hole caps.
Locate the hole caps included in the accessory
pack and install them in the shipping bolt holes.
Cap
NOTE
Save the bolt assemblies for future use. To prevent
damage to internal components, Do not transport the
washing machine without reinstalling the transit bolts.
Failure to remove transit bolts and retainers may
cause severe vibration and noise, which can lead to
permanent damage to the washing machine. The cord
is secured to the back of the washing machine with
a shipping bolt to help prevent operation with transit
bolts in place.
EN
12
Using Anti-Slip Sheets (Optional)
If you install the appliance on a slippery surface, it may
move because of excessive vibration. Incorrect leveling
may cause malfunction through noise and vibration. If
this occurs, install the anti-slip sheets under the leveling
feet and adjust the level.
1
Clean the oor to attach the anti-slip sheets.
Use a dry rag to remove and clean foreign
objects and moisture. If moisture remains, the
anti-slip sheets may slip.
2
Adjust the level after placing the appliance in the
installation area.
3
Place the adhesive side of the anti-slip sheets on
the oor.
It is most effective to install the anti-slip sheets
under the front legs. If it is difcult to place the
pads under the front legs, place them under the
back legs.
This side up
Adhesive side
4
Ensure the appliance is level.
Push or rock the top edges of the appliance
gently to make sure that the appliance does not
rock. If the appliance rocks, level the appliance
again.
NOTE
You can obtain anti-slip sheets from the LG Service
Centre.
Wooden Floors (Suspended
Floors)
Wooden oors are particularly susceptible to vibration.
To reduce vibration we recommend you place rubber
cups at least 15 mm thick under each foot of the
appliance, secured to at least two oor beams with
screws.
Rubber cup
If possible install the appliance in one of the corners of
the room, where the oor is more stable.
Fit the rubber cups to reduce vibration.
NOTE
Proper placement and leveling of the washing machine
will ensure long, regular, and reliable operation.
The washing machine must be 100% horizontal and
It must not ‘Seesaw’ across corners under the load.
wax and other lubricant coatings.
Do not let the feet of the washing machine get wet.
Failure to do so may cause vibration or noise.
You can obtain rubber cups from
the LG Service Centre.
EN
13
Leveling the Appliance
If the oor is uneven, turn the adjustable feet as required
(Do not insert pieces of wood etc. under the feet). Make
sure that all four feet are stable and resting on the oor
and then check that the appliance is perfectly level (Use
a spirit level).
Once the appliance is level, tighten the lock nuts up
towards the base of the appliance. All lock nuts must
be tightened.
Raise
Lock nut
Lower
Tighten all 4
lock nuts securely
Diagonal Check
When pushing down the edges of the top plate
diagonally, the appliance should not move up and
down at all (Check both directions). If the appliance
rocks when pushing the machine top plate diagonally,
adjust the feet again.
NOTE
Timber or suspended type ooring may contribute to
excessive vibration and unbalance.
If the washing machine is installed on a raised
platform, it must be securely fastened in order to
eliminate the risk of falling off.
Connecting the Supply Hose
Water supply pressure must be between 0.1 MPa and
1.0 MPa (1.0‒10.0 kgf/cm
2
).
Do not strip or crossthread when connecting supply
hose to the valve.
If the water supply pressure is more than 1.0 MPa, a
decompression device should be installed.
Periodically check the condition of the hose and
replace the hose if necessary.
Checking the Rubber Seal on the Supply
Hose
Two rubber seals are supplied with the water supply
hoses.
They are used for preventing water leaks. Make sure the
connection to taps is sufciently tight.
Hose connector
Rubber seal
Hose connector
Rubber seal
EN
14
Connecting Hose to Water Tap
Connecting Screw-Type Hose to Tap with
Thread
Screw the hose connector onto the water supply tap.
Connecting Screw-Type Hose to Tap Without
Thread
1
Loose the four xing screws.
Upper
connector
Rubber
seal
Fixing screw
2
Remove the guide plate if the tap is too large to t
the adapter.
Guide plate
3
Push the adapter onto the end of the tap so that
the rubber seal forms a watertight connection.
Tighten the four xing screws.
4
Push the supply hose vertically upwards so that the
rubber seal within the hose can adhere completely
to the tap and then tighten it by screwing it to the
right.
Plate
Supply
hose
Connecting One Touch Type Hose to Tap
Without Thread
1
Unscrew the adapter ring plate and loose the four
xing screws.
Ring plate
2
Remove the guide plate if the tap is too large to t
the adapter.
Guide plate
EN
15
3
Push the adapter onto the end of the tap so that
the rubber seal forms a watertight connection.
Tighten the four xing screws and the adapter ring
plate .
4
Pull the connector latch plate down, push the
supply hose onto the adapter, and release the
connector latch plate. Make sure the adapter locks
into place.
Latch plate
NOTE
After connecting the supply hose to the water tap,
turn on the water tap to ush out foreign substances
(dirt, sand, sawdust, and etc.) in the water lines. Let
the water drain into a bucket, and check the water
temperature.
Connecting Hose to Appliance
Attach the hot water line to the hot water supply on the
back of the washer. Attach the cold water line to the cold
water supply on the back of the washer.
NOTE
After completing connection, if water leaks from the
hose, repeat the same steps.
Use the most conventional type of tap for the water
supply. In case the tap is square or too big, remove
the guide plate before inserting the tap into the
adaptor.
Using the Horizontal Tap
Horizontal tap
Extension tap
Square tap
Hot
water
supply
Cold
water
supply
EN
16
Installing the Drain Hose
The drain hose should not be placed higher than 100
cm above the oor. Water in the appliance may not
drain or may drain slowly.
Securing the drain hose correctly will protect the oor
from damage due to water leakage.
If the drain hose is too long, do not force it back into
the appliance. This will cause abnormal noise.
about 100 cm
about 145 cm
about 105 cm
When installing the drain hose to a sink, secure it
tightly with string.
Securing the drain hose correctly will protect the oor
from damage due to water leakage.
Laundry tub
Hose
retainer
T
ie strap
Electrical Connections (In the UK
Only)
The wires in the mains lead are coloured in accordance
with the following code:
Green and Yellow: Earth
Blue: Neutral
Brown: Live
This appliance must be earthed.
Green and
Yellow (Earth)
Brown (Live)
Blue (Neutral)
Fuse
Cord grip
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug, proceed
as follows:
The green and yellow wire must be connected to the
terminal in the plug which is marked with the letter E or
by the earth symbol (
) or coloured Green or Green
and Yellow.
The blue wire must be connected to the terminal which
is marked with the letter N or coloured Black.
The brown wire must be connected to the terminal which
is marked with the letter L or coloured Red.
If a 13 amp (BS 1363) plug is used, t a 13 amp BS
1362 fuse.
max. 100 cm
max. 100 cm
max. 100 cm
EN
17
OPERATION
Using the Washing Machine
Before the rst wash, select a washing programme,
allow the washing machine to wash without clothing.
This will remove residue and water from the drum that
may have been left during manufacturing.
1
Sort laundry and load items.
Sort laundry by fabric type, soil level, colour and
load size as needed. Open the door and load
items into the washing machine.
2
Add cleaning products and/or detergent and
softener.
Add the proper amount of detergent to the
detergent dispenser drawer. If desired, add
bleach or fabric softener to the appropriate areas
of the dispenser.
3
Turn on the washing machine.
Press the Power button to turn on the washing
machine.
4
Choose the desired washing cycle.
Press the cycle button repeatedly or turn the
cycle selector knob until the desired cycle is
selected.
5
Begin cycle.
Press the Start/Pause button to begin the cycle.
The washing machine will agitate briey without
water to measure the weight of the load. If the
Start/Pause button is not pressed within 5
minutes, the washing machine will shut off and
all settings will be lost.
6
End of cycle.
When the cycle is nished, a melody will sound.
Immediately remove your clothing from the
washing machine to reduce wrinkling. Check
around the door seal when removing the load for
small items that may be caught in the seal.
EN
18
Sorting Laundry
1
Look for a care label on your clothes.
This will tell you about the fabric content of your
garment and how it should be washed.
Symbols on the care labels.
Wash temperature
Normal machine wash
Permanent press
Delicate
Hand wash
Do not wash
2
Sorting laundry.
To get the best results, sort clothes into loads
that can be washed with the same wash cycle.
Different fabrics need to be washed at varying
temperatures and spin speeds.
Always sort dark colours from pale colours and
whites. Wash separately as dye and lint transfer
can occur causing discolouration of white and
pale garments. If possible, do not wash heavily
soiled items with lightly soiled ones.
Soil (Heavy, Normal, Light) :
Separate clothes according to amount of soil.
Colour (White, Lights, Darks):
Separate white fabrics from coloured fabrics.
Lint (Lint producers, Collectors):
Wash lint producers and lint collectors
separately.
3
Caring before loading.
Combine large and small items in a load. Load
large items rst.
Large items should not be more than half the
total wash load. Do not wash single items. This
may cause an unbalanced load. Add one or two
similar items.
Check all pockets to make sure that they are
empty. Items such as nails, hair clips, matches,
pens, coins and keys can damage both your
washing machine and your clothes.
Close zippers, hooks and strings to make sure
that these items don’t snag on other clothes.
Pre-treat dirt and stains by brushing a small
amount of detergent dissolved water onto stains
to help lift dirt.
Check the folds of the exible gasket (gray) and
remove any small articles.
CAUTION
Check inside the drum and remove any items from a
previous wash.
Remove any clothing or items from the exible gasket
to prevent clothing and gasket damage.
EN
19
Adding Cleaning Products
Detergent Dosage
Detergent should be used according to the instruction
of the detergent manufacturer and selected according
to type, colour, soiling of the fabric and washing
temperature.
If too much detergent is used, too many suds can
occur and this will result in poor washing results or
cause heavy load to the motor.
If you wish to use liquid detergent follow the guidelines
provided by the detergent manufacturer.
You can pour liquid detergent directly into the
main detergent drawer if you are starting the cycle
immediately.
Do not use liquid detergent if you are using Time
delay, or if you have selected Pre Wash, as the liquid
may harden.
If too many suds occur, reduce the detergent amount.
Detergent usage may need to be adjusted for water
temperature, water hardness, size and soil level of the
load. For best results, avoid oversudsing.
Refer to the label of the clothes, before chooseing the
detergent and water temperature.
When using the washing machine, use designated
detergent for each type of clothing only:
General powdered detergents for all types of fabric
Powdered detergents for delicate fabric
Liquid detergents for all types of fabric or
designated detergents only for wool
For better washing performance and whitening, use
detergent with the general powdered bleach.
Detergent is ushed from the dispenser at the
beginning of the cycle.
NOTE
Do not let the detergent harden. Doing so may lead to
blockages, poor rinse performance or odour.
Full load : According to manufacturers
recommendation.
Part load : 3/4 of the normal amount
Minimum load : 1/2 of full load
Adding Detergent and Fabric Softener
Adding Detergent
Main wash only →
Pre wash+Main wash →
NOTE
Too much detergent, bleach or softener may cause an
overow.
Be sure to use the appropriate amount of detergent.
Adding Fabric Softener
Do not exceed the maximum ll line. Overlling can
cause early dispensing of the fabric softener, which
may stain clothes. Close the dispenser drawer slowly.
EN
1 / 1

LG FH4U2TDH1N Manual de utilizare

Categorie
Mașini de spălat
Tip
Manual de utilizare