Makita CL003GZ Manual de utilizare

CL003G

EN Cordless Cleaner INSTRUCTION MANUAL 10

SL Brezžični čistilnik NAVODILA ZA UPORABO 19

SQ Pastruesi me bateri MANUALI I PËRDORIMIT 28

BG Акумулаторна

прахосмукачка РЪКОВОДСТВО ЗА

ЕКСПЛОАТАЦИЯ 37

HR Bežični usisavač PRIRUČNIK S UPUTAMA 48

МК Безжична правосмукалка УПАТСТВО ЗА УПОТРЕБА 57

SR Бежични чистач УПУТСТВО ЗА УПОТРЕБУ 67

RO Aspirator cu acumulator MANUAL DE INSTRUCŢIUNI 77

UK Бездротовий пилосос ІНСТРУКЦІЯ З

ЕКСПЛУАТАЦІЇ 87

RU Аккумуляторный пылесос РУКОВОДСТВО ПО

ЭКСПЛУАТАЦИИ 97

2

Fig.1

11

2

3

Fig.2

12

Fig.3

1

2

1

2

3

4

Fig.4

1

2

3

Fig.5

1

2

3

4

5

6

7

89

Fig.6

3

1

23

Fig.7

1

2

3

4

Fig.8

Fig.9

1

Fig.10

1

2

3

Fig.11

1

2

Fig.12

1

2

Fig.13

12

3

Fig.14

4

Fig.15

1

Fig.16

1

2

3

4

Fig.17

Fig.18

1

2

3

Fig.19

Fig.20

Fig.21

1

Fig.22

5

21

3

4

Fig.23

Fig.24

3

1

2

Fig.25

1

2

Fig.26

Fig.27

Fig.28

1

2

Fig.29

6

1

2

Fig.30

1

2

Fig.31

Fig.32

Fig.33

12

Fig.34

1

2

Fig.35

1

2

Fig.36

1

2

Fig.37

7

Fig.38

Fig.39

1

3

2

Fig.40

1

2

Fig.41

3

2

1

Fig.42

1

Fig.43

8

1

2

3

4

5

Fig.44

Fig.45

Fig.46

14

5

1

3

2

Fig.47

1

2

3

4

Fig.48

12

34

Fig.49

9

12

3

4

Fig.50

1

2

Fig.51

12

4

3

Fig.52

10 ENGLISH

ENGLISH (Original instructions)

WARNING

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sen-

sory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruc-

tion concerning use of the appliance in a safe way and understand the hazards involved.

• Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children with-

out supervision.

• See the chapter “SPECIFICATIONS” for the type reference of the battery.

• See the section “Installing or removing battery cartridge” for how to remove or install the battery.

• When disposing the battery cartridge, remove it from the tool and dispose of it in a safe place. Follow your local

regulations relating to disposal of battery.

• If the tool is not used for a long period of time, the battery must be removed from the tool.

• Do not short the battery cartridge.

• See the chapter “MAINTENANCE” for the appropriate details of precautions during user maintenance.

SPECIFICATIONS

Model: CL003G

Capacity 250 mL / 400 mL (country specic)

Continuous use

(with battery BL4025) 1 (Quiet mode) Approx. 80 min

2 (Normal speed mode) Approx. 40 min

3 (High speed mode) Approx. 25 min

4 (Max speed mode) Approx. 16 min

Overall length (with pipe, nozzle, and battery BL4025) 1,106 mm

Rated voltage D.C. 36 V - 40 V max

Net weight 1.9 - 2.6 kg

• Due to our continuing program of research and development, the specications herein are subject to change

without notice.

• Specications may dier from country to country.

• The weight does not include accessories but battery cartridge(s). The lightest and heaviest combination weight

of the appliance and battery cartridge(s) are shown in the table.

Applicable battery cartridge and charger

Battery cartridge BL4020* / BL4025* / BL4040* / BL4050F

* : Recommended battery

Charger DC40RA / DC40RB / DC40RC

• Some of the battery cartridges and chargers listed above may not be available depending on your region of

residence.

WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges

and chargers may cause injury and/or re.

11 ENGLISH

Symbols

The followings show the symbols which may be used

for the equipment. Be sure that you understand their

meaning before use.

Read the instruction manual.

A representative battery applicable to this

product.

Ni-MH

Li-ion Only for EU countries

Due to the presence of hazardous com-

ponents in the equipment, waste electrical

and electronic equipment, accumulators

and batteries may have a negative impact

on the environment and human health.

Do not dispose of electrical and electronic

appliances or batteries with household

waste!

In accordance with the European Directive

on waste electrical and electronic equip-

ment and on accumulators and batteries

and waste accumulators and batteries,

as well as their adaptation to national law,

waste electrical equipment, batteries and

accumulators should be stored separately

and delivered to a separate collection point

for municipal waste, operating in accor-

dance with the regulations on environmen-

tal protection.

This is indicated by the symbol of the

crossed-out wheeled bin placed on the

equipment.

Intended use

The tool is intended for collecting dry dust.

SAFETY WARNINGS

Cordless cleaner safety warnings

WARNING: IMPORTANT! READ CAREFULLY

all safety warnings and all instructions BEFORE

USE. Failure to follow the warnings and instructions

may result in electric shock, re and/or serious injury.

1. Do not expose to rain. Store indoors.

2. Do not allow to be used as a toy. Close

attention is necessary when used by or near

children.

3. Use only as described in this manual. Use only

manufacturer's recommended attachments.

4. Do not use with damaged battery. If appliance

is not working as it should, has been dropped,

damaged, left outdoors, or dropped into water,

return it to a service center.

5. Do not handle appliance with wet hands.

6. Do not put any object into openings. Do not

use with any opening blocked; keep free of

dust, lint, hair, and anything that may reduce

air ow.

7. Keep hair, loose clothing, ngers, and all parts

of body away from openings and moving parts.

8.

Turn o all controls before removing the battery.

9. Use extra care when cleaning on stairs.

10. Do not use to pick up ammable or combusti-

ble liquids, such as gasoline, or use in areas

where they may be present.

11. Use only the charger supplied by the manufac-

turer to recharge.

12.

Do not pick up anything that is burning or smok-

ing, such as cigarettes, matches, or hot ashes.

13.

Do not use without dust bag and/or lters in place.

14. Do not charge the battery outdoors.

15. Recharge only with the charger specied by

the manufacturer. A charger that is suitable for

one type of battery pack may create a risk of re

when used with another battery pack.

16. Use appliances only with specically desig-

nated battery packs. Use of any other battery

packs may create a risk of injury and re.

17. When (the) battery pack is not in use, keep

it away from other metal objects, like paper

clips, coins, keys, nails, screws or other small

metal objects, that can make a connection

from one terminal to another.

18. Under abusive conditions, liquid may be

ejected from the battery; avoid contact. If con-

tact accidentally occurs, ush with water.

19. Do not use a battery pack or appliance that

is damaged or modied. Damaged or modied

batteries may exhibit unpredictable behaviour

resulting in re, explosion or risk of injury.

20.

Do not expose a battery pack or appliance to

re or excessive temperature. Exposure to re or

temperature above 130 °C may cause explosion.

21. Follow all charging instructions and do not

charge the battery pack or appliance outside

the temperature range specied in the instruc-

tions. Charging improperly or at temperatures

outside the specied range may damage the

battery and increase the risk of re.

SAVE THESE INSTRUCTIONS.

ADDITIONAL SAFETY RULES

This appliance is intended for household use.

1. Read this instruction manual and the charger

instruction manual carefully before use.

2. Do not pick up the following materials:

—

Hot materials such as lit cigarettes or spark/

metal dust generated by grinding/cutting metal

— Flammable materials such as gasoline,

thinner, benzine, kerosene or paint

— Explosive materials like nitroglycerin

— Ignitable materials such as Aluminum,

zinc, magnesium, titanium, phosphorus

or celluloid

— Wet dirt, water, oil or the like

— Hard pieces with sharp edges, such as

wood chips, metals, stones, glasses,

nails, pins or razors

— Powder to clot such as cement or toner

— Conductive dust such as metal or carbon

— Fine particle like concrete dust

12 ENGLISH

Such action may cause re, injury and/or prop-

erty damage.

3. Stop operation immediately if you notice any-

thing abnormal.

4. If you drop or strike the cleaner, check it care-

fully for cracks or damage before operation.

5. Do not bring close to stoves or other heat

sources.

6. Do not block the intake hole or vent holes.

SAVE THESE INSTRUCTIONS.

Important safety instructions for

battery cartridge

1. Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using

battery.

2. Do not disassemble or tamper with the battery

cartridge. It may result in a re, excessive heat,

or explosion.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4. If electrolyte gets into your eyes, rinse them

out with clear water and seek medical atten-

tion right away. It may result in loss of your

eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any con-

ductive material.

(2) Avoid storing battery cartridge in a con-

tainer with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water

or rain.

A battery short can cause a large current

ow, overheating, possible burns and even a

breakdown.

6. Do not store and use the tool and battery car-

tridge in locations where the temperature may

reach or exceed 50 °C (122 °F).

7. Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn

out. The battery cartridge can explode in a re.

8. Do not nail, cut, crush, throw, drop the battery

cartridge, or hit against a hard object to the

battery cartridge. Such conduct may result in a

re, excessive heat, or explosion.

9. Do not use a damaged battery.

10. The contained lithium-ion batteries are subject

to the Dangerous Goods Legislation require-

ments.

For commercial transports e.g. by third parties,

forwarding agents, special requirement on pack-

aging and labeling must be observed.

For preparation of the item being shipped, consult-

ing an expert for hazardous material is required.

Please also observe possibly more detailed

national regulations.

Tape or mask o open contacts and pack up the

battery in such a manner that it cannot move

around in the packaging.

11. When disposing the battery cartridge, remove

it from the tool and dispose of it in a safe

place. Follow your local regulations relating to

disposal of battery.

12. Use the batteries only with the products

specied by Makita. Installing the batteries to

non-compliant products may result in a re, exces-

sive heat, explosion, or leak of electrolyte.

13. If the tool is not used for a long period of time,

the battery must be removed from the tool.

14. During and after use, the battery cartridge may

take on heat which can cause burns or low

temperature burns. Pay attention to the han-

dling of hot battery cartridges.

15. Do not touch the terminal of the tool imme-

diately after use as it may get hot enough to

cause burns.

16. Do not allow chips, dust, or soil stuck into the

terminals, holes, and grooves of the battery

cartridge. It may cause heating, catching re,

burst and malfunction of the tool or battery car-

tridge, resulting in burns or personal injury.

17. Unless the tool supports the use near

high-voltage electrical power lines, do not use

the battery cartridge near a high-voltage elec-

trical power lines. It may result in a malfunction

or breakdown of the tool or battery cartridge.

18. Keep the battery away from children.

SAVE THESE INSTRUCTIONS.

CAUTION: Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that

have been altered, may result in the battery bursting

causing res, personal injury and damage. It will

also void the Makita warranty for the Makita tool and

charger.

Tips for maintaining maximum

battery life

1. Charge the battery cartridge before completely

discharged. Always stop tool operation and

charge the battery cartridge when you notice

less tool power.

2. Never recharge a fully charged battery car-

tridge. Overcharging shortens the battery

service life.

3. Charge the battery cartridge with room tem-

perature at 10 °C - 40 °C (50 °F - 104 °F). Let

a hot battery cartridge cool down before

charging it.

4. When not using the battery cartridge, remove

it from the tool or the charger.

5. Charge the battery cartridge if you do not use

it for a long period (more than six months).

13 ENGLISH

FUNCTIONAL

DESCRIPTION

CAUTION: Always be sure that the tool is

switched o and the battery cartridge is removed

before adjusting or checking function on the tool.

CAUTION: Take care not to trap nger(s)

between cleaner and battery as shown in diagram

when loading battery. Trapping nger(s) may cause

injury.

► Fig.1

Installing or removing battery cartridge

CAUTION: Always switch o the tool before

installing or removing of the battery cartridge.

CAUTION: Hold the tool and the battery car-

tridge rmly when installing or removing battery

cartridge. Failure to hold the tool and the battery

cartridge rmly may cause them to slip o your hands

and result in damage to the tool and battery cartridge

and a personal injury.

► Fig.2: 1. Red indicator 2. Button 3. Battery cartridge

To remove the battery cartridge, slide it from the tool

while sliding the button on the front of the cartridge.

To install the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place. Insert it all the way until it locks in place

with a little click. If you can see the red indicator as

shown in the gure, it is not locked completely.

CAUTION: Always install the battery cartridge

fully until the red indicator cannot be seen. If not,

it may accidentally fall out of the tool, causing injury to

you or someone around you.

CAUTION: Do not install the battery cartridge

forcibly. If the cartridge does not slide in easily, it is

not being inserted correctly.

Battery protection system

The tool is equipped with a tool/battery protection sys-

tem. This system automatically cuts o power to the

motor to extend tool and battery life. The tool will auto-

matically stop during operation if the tool or battery is

placed under one of the following conditions.

Overloaded:

The tool/battery is operated in a manner that causes it

to draw an abnormally high current.

In this situation, turn the tool o and stop the application

that caused the tool to become overloaded. Then turn

the tool on to restart.

If the tool does not start, the tool/battery is overheated.

In this situation, let the tool/battery cool before turning

the tool on again.

Low battery voltage:

The remaining battery capacity is too low and the tool

will not operate. In this situation, remove and recharge

the battery.

Protections against other causes:

Protection system is also designed for other causes

that could damage the tool and allows the tool to stop

automatically. Take all the following steps to clear the

causes, when the tool has been brought to a temporary

halt or stop in operation.

1.

Turn the tool o, and then turn it on again to restart.

2. Charge the battery(ies) or replace it/them with

recharged battery(ies).

3. Let the tool and battery(ies) cool down.

If no improvement can be found by restoring protection

system, then contact your local Makita Service Center.

Indicating the remaining battery capacity

Press the check button on the battery cartridge to indi-

cate the remaining battery capacity. The indicator lamps

light up for a few seconds.

► Fig.3: 1. Indicator lamps 2. Check button

Indicator lamps Remaining

capacity

Lighted O Blinking

75% to 100%

50% to 75%

25% to 50%

0% to 25%

Charge the

battery.

The battery

may have

malfunctioned.

NOTE: Depending on the conditions of use and the

ambient temperature, the indication may dier slightly

from the actual capacity.

NOTE: The rst (far left) indicator lamp will blink when

the battery protection system works.

Switch action

► Fig.4:

1. Suction power change button 2. ON/OFF button

To start the cleaner, simply push the ON/OFF button. To

switch o, push the ON/OFF button again.

You can change the suction power of the cleaner in

four steps by pushing the suction power change button.

Each push on this button repeats the Quiet/Normal/

High/Max mode in a cycle.

Level Indication Mode

1Quiet mode

2

Normal speed mode

3High speed mode

4Max speed mode

14 ENGLISH

NOTE: You can change the suction power before

turning on the cleaner.

NOTE: The cleaner starts the operation with the

same suction power as the last operation.

Lighting up the lamp

CAUTION: Do not look in the light or see the

source of light directly.

To turn on the lamp, push the suction power change

button. The lamp goes o in approximately 10 seconds.

While the cleaner is running, the lamp turns on.

The lamp goes out approximately 10 seconds after

stopping operation.

NOTE: When the remaining battery capacity gets low,

the lamp starts blinking. The timing, at which the lamp

starts blinking depends on the temperature at work

place and the battery cartridge conditions.

► Fig.5: 1. Suction power change button 2. ON/OFF

button 3. Lamp

PARTS DESCRIPTION

Country specic

► Fig.6

1250 mL dust case

(Optional accessory) 2400 mL dust case

(Optional accessory) 3Mesh lter 4Cyclone body

5High performance

lter (Filter frame in

gray color) (Optional

accessory)

6HEPA lter (Filter frame

in white color) (Optional

accessory)

7Sponge sheet 8Cleaner body

9Hand strap (Country

specic) ------

ASSEMBLY

CAUTION: Always be sure that the tool is

switched o and the battery cartridge is removed

before carrying out any work on the tool.

NOTICE: Make sure all the attachments and

components are secured in place properly before

use.

Installing and removing cleaner

attachments

CAUTION: After installing attachments, check

if they are securely installed. If the attachments are

installed imperfectly, they may come o and cause

personal injury.

CAUTION: Be careful not to hit your hand on

the wall etc. when removing the attachments.

When using attachment with lock

function

To install attachment, insert it to the suction inlet of the cleaner

until it clicks. Make sure that the attachment is locked.

► Fig.7: 1. Suction inlet 2. Attachment with lock func-

tion 3. Hook

NOTICE: When installing the attachment with

lock function, be sure to align the release button

on the cleaner with the hook on the attachment. If

they are not aligned, the attachment will not be locked

and may come o from the cleaner.

To remove attachment, pull it o the cleaner while

pressing and holding the arms of the release button.

► Fig.8: 1. Release button 2. Arm of release button

3. Attachment with lock function 4. Suction

inlet

When using attachment without lock

function

NOTICE: To install attachment without lock func-

tion, insert it into the suction inlet of the cleaner

by twisting it as shown in the gure. To detach

attachment, release it from the cleaner by twist-

ing it as shown in the gure. Avoid twisting the

attachment in the direction opposite to the arrow

in the gure as it may loosen the cyclone unit.

► Fig.9

15 ENGLISH

OPERATION

CAUTION:

Do not move your face close to the

air vent when operating the cleaner. If foreign objects

are blown into eyes, it may result in personal injury.

NOTICE: Avoid using the cleaner in a horizontal

or upward facing position. It may otherwise cause

the mesh lter to become clogged.

NOTICE:

Always use the cleaner with lters installed.

Using the cleaner without lters may result in a motor malfunction.

NOTICE: Empty the dust case in the cyclone unit

when dust has accumulated. Continued use will

result in weakened suction force.

The cyclone unit helps reduce the amount of dust that

enters into the cleaner, enhancing the suction perfor-

mance with simple and easy dust disposing.

Cleaning (Suction)

Nozzle

With 250 mL dust case only

Attach the nozzle to clean o tables, desks, furniture,

etc. The nozzle slips on easily.

► Fig.10: 1. Nozzle

Nozzle + Extension wand (Straight pipe)

The extension wand ts in between the nozzle and the

cleaner itself. This arrangement is convenient for clean-

ing a oor in a standing position.

► Fig.11:

1. Cleaner body 2. Extension wand 3. Nozzle

Corner nozzle

Fit on the corner nozzle for cleaning corners and crev-

ices of a car or furniture.

► Fig.12: 1. Corner nozzle 2. Cleaner body

You can store the corner nozzle in the nozzle holder.

► Fig.13: 1. Nozzle holder 2. Corner nozzle

CAUTION: Be careful not to trap nger(s)

between the corner nozzle and the nozzle holder.

Trapping nger(s) may cause injury.

Corner nozzle + Extension wand

(Straight pipe)

In tight quarters where the cleaner itself cannot squeeze

in, or in high places hard to reach, use this arrangement.

► Fig.14:

1. Corner nozzle 2. Extension wand 3. Cleaner body

Cleaning without nozzle

With 250 mL dust case only

You can pick up powder and dust without nozzle.

► Fig.15

For picking up dust on a oor in a standing position, it is conve-

nient to attach the extension wand (straight pipe) to the cleaner.

► Fig.16: 1. Extension wand

Disposing of dust

CAUTION: Empty the dust case before it

becomes too full, or the suction force weakens.

CAUTION:

Be careful not to trap nger(s) between

the dust case and cyclone body when reassembling.

Dispose of accumulated dust as follows before it

exceeds the dust disposal line.

1. Point the cleaner head downwards, hold the dust

case rmly, and then pull it apart from the cyclone body

while pressing and holding the release buttons on both

sides of the dust case.

► Fig.17: 1. Dust disposal line 2. Dust case

3. Release buttons 4. Mesh lter

2. Empty the dust case and clean the adhered dust

o the mesh lter.

► Fig.18

3. Place the dust case back onto the cyclone body to

secure it in place with clicks.

► Fig.19:

1. Dust case 2. Release buttons 3. Cyclone body

CAUTION: The dust may y up when dis-

posed out of the dust case. Be careful not to let

the dust get into your eyes.

NOTICE: When the dust case becomes dirty,

remove and wash it with water. Dry the dust case

thoroughly before reassembly and use.

NOTICE:

Make sure all the attachments and com-

ponents are secured in place properly before use.

NOTICE: If the suction force does not recover

even after disposing of the dust and cleaning the

mesh lter, check whether dust has accumulated

inside the cyclone body or clogging has occurred.

MAINTENANCE

CAUTION: Always be sure that the tool is

switched o and the battery cartridge is removed

before attempting to perform inspection or

maintenance.

NOTICE: Never use gasoline, benzine, thinner,

alcohol or the like. Discoloration, deformation or

cracks may result.

To maintain product SAFETY and RELIABILITY,

repairs, any other maintenance or adjustment should

be performed by Makita Authorized or Factory Service

Centers, always using Makita replacement parts.

After use

CAUTION: Putting the cleaner against the

wall without any other support may cause the

cleaner to fall down, resulting in personal injury

or damage to the cleaner.

► Fig.20

16 ENGLISH

Regular maintenance

NOTICE: Clean the lters in the cyclone unit

when they become clogged. Continued use in the

clogged condition may result in heating or motor

malfunction.

NOTICE: Do not blow dust sticking on the

cleaner and lters by air duster. It brings dust into

the housing and causes failure.

Routine maintenance is required to restore normal

operating conditions.

Cleaner body

Wipe o the outside (cleaner body) of the cleaner using

a cloth dampened in soapy water, and clean out the

suction openings.

► Fig.21

Cyclone unit and lters

NOTICE: Dust o and clean out inside the

cyclone unit and lters, when suction perfor-

mance becomes less eective regardless of the

amount of dust collected in the dust case.

NOTICE: After washing lters, dry them thor-

oughly before use. Insuciently dried lters may

cause poor suction and shorten the service life of the

motor.

NOTICE: After cleaning lters and sponge sheet,

be sure to re-install them before use. If you use the

cleaner without lters and sponge sheet, dust comes

into the motor housing and causes malfunction.

Cyclone unit

1. Tap the cyclone unit several times with your hand

to remove dust adhering to the inner surface of the

cyclone unit and lter.

► Fig.22: 1. Cyclone unit

2. With the suction inlet pointing downwards, turn the

cyclone unit as shown in the gure aligning the pointer

on the cyclone unit with that on the cleaner body to

disengage the lock. Then detach the cyclone unit from

the cleaner body slowly and straightly.

► Fig.23: 1. Cyclone unit 2. Suction inlet 3. Pointers

4. Filter

NOTE: Dust may y out when the cyclone unit is

disassembled. It is recommended to place a garbage

bag underneath the cyclone unit.

3. Dust o inside the cyclone unit and lter.

► Fig.24

4. Place the cyclone unit back onto the cleaner body,

aligning the pointer on the cyclone unit with that on the

cleaner body. Then turn the cyclone unit as shown in

the gure until it is secured in place.

► Fig.25: 1. Cyclone unit 2. Cleaner body 3. Pointers

High performance lter

Optional accessory

1. Disassemble the cyclone unit from the cleaner

body.

2. Hold the mounting end of high performance lter

and pull it apart from the cleaner body.

► Fig.26: 1. High performance lter 2. Cleaner body

3. Wipe and shake dust o the high performance

lter by hand.

► Fig.27

4. Wash the high performance lter in soapy water

when it is clogged with dust and dirt. Dry it out thor-

oughly in the shade before use.

► Fig.28

NOTE: Avoid fastening the attachment end (rubber

sealing ring) of high performance lter when hanging

it up for drying.

5. Hold the mounting end of high performance lter

and squeeze it back into the cleaner body.

► Fig.29: 1. High performance lter 2. Cleaner body

HEPA lter

Optional accessory

NOTICE: Do not rub or scratch the HEPA lter

with hard objects such as a brush and a paddle.

1. Disassemble the cyclone unit from the cleaner

body.

2. Hold the mounting end of HEPA lter (covered with

high performance prelter) and pull it apart from the

cleaner body.

► Fig.30: 1. HEPA lter (covered with high perfor-

mance prelter) 2. Cleaner body

3. Disassemble the high performance prelter from

the HEPA lter by hand twisting.

► Fig.31: 1. High performance prelter 2. HEPA lter

4. Wipe and shake dust o the high performance

prelter and HEPA lter by hand.

► Fig.32

5. Wash the high performance prelter and HEPA

lter in soapy water. Rinse and dry them thoroughly in

the shade before use.

► Fig.33

NOTE: Avoid fastening the attachment end (rubber

sealing ring) of HEPA lter when hanging it up for

drying.

6. Attach the high performance prelter onto the

HEPA lter.

► Fig.34: 1. High performance prelter 2. HEPA lter

7. Hold the mounting end of HEPA lter (covered with

high performance prelter) and squeeze it back into the

cleaner body.

► Fig.35: 1. HEPA lter (covered with the high perfor-

mance prelter) 2. Cleaner body

17 ENGLISH

Sponge sheet

1.

Disassemble the cyclone unit from the cleaner body.

2. Hold the mounting end of lter and pull it apart

from the cleaner body.

► Fig.36: 1. Filter 2. Cleaner body

3. Pull the sponge sheet o from the suction

opening.

► Fig.37: 1. Sponge sheet 2. Suction opening

4. Wipe and shake dust o the sponge sheet by

hand.

► Fig.38

5. Wash the sponge sheet in soapy water when it is

clogged with dust and dirt. Dry it out thoroughly in the

shade before use.

► Fig.39

6. Place the sponge sheet back in the original

position. Make sure that the left and right edges of the

sponge sheet are secured with stoppers and no gap

between the sponge sheet and suction opening.

► Fig.40: 1. Sponge sheet 2. Stopper 3. Suction

opening

7. Hold the mounting end of lter and squeeze it

back into the cleaner body.

► Fig.41: 1. Filter 2. Cleaner body

Condition-based maintenance

NOTICE: Clean the mesh lter in the cyclone

unit when they become clogged. Continued use in

the clogged condition may result in heating or motor

malfunction.

Deep and spot cleaning needs to be carried out accord-

ing to your tool performance.

Mesh lter

Clean up the mesh lter placed in the cyclone unit when

no suggested improvement on suction performance has

been found after completing regular maintenance.

1. Hold the dust case rmly and pull it apart from the

cyclone body while pressing and holding the release

buttons on both sides of the dust case.

► Fig.42: 1. Dust case 2. Cyclone body 3. Release

buttons

2. Turn the mesh lter as shown in the gure to dis-

engage the lock. Then detach it from the cyclone body.

► Fig.43: 1. Mesh lter

3. Disassemble the mesh lter into three compo-

nents: prelter, tubular sponge lter and mesh pipe.

i Squeeze the guide stoppers on top of the mesh

pipe together.

ii Pass the guide stoppers down through the guide

hole on top of the prelter.

iii Pull the the prelter along the tubular sponge lter

and mesh pipe.

iv Remove the tubular sponge lter from the mesh

pipe.

► Fig.44: 1. Prelter 2. Tubular sponge lter 3. Mesh

pipe 4. Guide stoppers 5. Guide hole

4. Wipe and shake dust o the lters and mesh pipe

by hand.

► Fig.45

5. Wash the lters and mesh pipe in soapy water

when they are clogged with dust and dirt. Dry them out

thoroughly in the shade before use.

► Fig.46

6. Reassemble the mesh lter.

i Insert the tubular sponge lter into the prelter.

ii Insert the mesh pipe into the tubular sponge lter

and prelter, passing the guide stoppers on top of the

mesh pipe through the guide hole on top of the prelter.

iii Push the mesh pipe through the tubular sponge

lter and prelter until it lock in place with a click.

► Fig.47: 1. Prelter 2. Tubular sponge lter 3. Mesh

pipe 4. Guide stoppers 5. Guide hole

7. Attach the mesh lter back into the cyclone body

aligning the hooks on the mesh lter with the ports on

the suction outlet of the cyclone body. Turn the mesh

lter as shown in the gure until the hooks are locked

with a click. Make sure that the mesh lter is installed

securely.

► Fig.48: 1. Mesh lter 2. Cyclone body 3. Hook

4. Port

Air channels in cyclone unit

Incoming foreign substance may block the air channels

in the cyclone unit and laden air ows. Remove any

obstacles in the air path if the suction performance is

being aected remarkably.

1. Disassemble the cyclone unit into three compo-

nents: dust case, mesh lter and cyclone body.

► Fig.49: 1. Dust case 2. Mesh lter 3. Cyclone body

4. Cleaner body

2. Press and hold the guide stopper on the inlet pipe

down through the locking hole on the cyclone body

using the hand tool with a point. Then detach the inlet

pipe from the cyclone body.

► Fig.50: 1. Inlet pipe 2. Guide stopper 3. Cyclone

body 4. Locking hole

3. Clean o any substance found in the air channels.

Foreign substance is likely to get stuck around an

incoming air port.

► Fig.51: 1. Suction inlet 2. Incoming air port

4. Insert the inlet pipe back in place until it is securely

locked.

► Fig.52: 1. Inlet pipe 2. Cyclone body 3. O-ring

4. Flap valve

NOTICE: Be sure that the O-ring and ap valve

are securely in place before reassembly. Suction

performance can be aected if the cyclone unit is

operated without the O-ring and ap valve in place.

5. Reassemble the cyclone unit, and attach it onto

the cleaner body.

18 ENGLISH

Troubleshooting

Before asking for repairs, check the following points.

Symptom Area to be investigated Fixing method

Weak suction power Is dust case or inside cyclone unit full of

dust? Empty dust case or inside cyclone unit.

Are lters clogged? Dust down or wash high performance lter/HEPA

lter/sponge sheet/mesh lter.

Anything to block incoming air channels? Clean any dust and objects out of air openings and

channels.

Is battery cartridge discharged? Charge battery cartridge.

Not working Is battery cartridge discharged? Charge battery cartridge.

Noise and vibration Are lters clogged? Dust down or wash high performance lter/HEPA

lter/sponge sheet/mesh lter.

Anything to block openings or holes? Clean any dust and objects out of nozzles, pipes

and air openings.

Is suction inlet of nozzle or pipe closed? Uncover and open suction inlet of nozzle and pipe.

CAUTION: Do not attempt to repair the cleaner by yourself.

OPTIONAL

ACCESSORIES

CAUTION: These accessories or attachments

are recommended for use with your Makita tool

specied in this manual. The use of any other

accessories or attachments might present a risk of

injury to persons. Only use accessory or attachment

for its stated purpose.

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service

Center.

• Extension wand (Straight pipe)

• Nozzle

• Nozzle for carpet

• Shelf brush

• Corner nozzle

• Round brush

• Flexible hose

• High performance lter

• HEPA lter

• Seat nozzle

• Crevice nozzle

• Tool bag

• Makita genuine battery and charger

NOTE: Some items in the list may be included in the

tool package as standard accessories. They may

dier from country to country.

19 SLOVENŠČINA

SLOVENŠČINA (Originalna navodila)

OPOZORILO

• To napravo lahko na varen način, če razumejo vključena tveganja, uporabljajo otroci, stari 8 let in več ter osebe

z zmanjšanimi zičnimi, čutilnimi ali psihičnimi sposobnostmi ter s pomanjkanjem izkušenj in znanja, če so pod

ustreznim nadzorom ali so prejeli navodila v zvezi z uporabo naprave.

• Otroci se z napravo ne smejo igrati. Otroci brez nadzora ne smejo izvajati čiščenja in uporabniškega

vzdrževanja.

• Glejte poglavje „TEHNIČNI PODATKI“ za vrsto baterije.

• Za navodila o nameščanju ali odstranjevanju baterije glejte razdelek „Nameščanje ali odstranjevanje akumula-

torske baterije“.

• Ko želite akumulatorsko baterijo zavreči, jo vzemite iz orodja in odložite med odpadke na varno mesto.

Upoštevajte lokalne uredbe glede odlaganja baterije.

• Če orodja ne boste uporabljali dalj časa, morate odstraniti baterijo.

• Ne povzročite kratkega stika akumulatorske baterije.

• Za primerne podrobnosti o previdnostnih ukrepih med vzdrževanjem glejte poglavje „VZDRŽEVANJE“.

TEHNIČNI PODATKI

Model: CL003G

Zmogljivost 250 mL/400 mL (odvisno od države)

Neprekinjena uporaba

(z akumulatorjem BL4025) 1 (tihi način) Pribl. 80 min

2 (način z običajno hitrostjo) Pribl. 40 min

3 (način z visoko hitrostjo) Pribl. 25 min

4 (način z največjo hitrostjo) Pribl. 16 min

Celotna dolžina (s cevjo, šobo in baterijo BL4025) 1.106 mm

Nazivna napetost D.C. največ 36 V – 40 V

Neto teža 1,9 – 2,6 kg

• Ker nenehno opravljamo raziskave in razvijamo svoje izdelke, se lahko tehnični podatki v tem dokumentu

spremenijo brez obvestila.

• Tehnični podatki se lahko razlikujejo od države do države.

• Teža ne vključuje pripomočkov, vključuje pa akumulatorske baterije. Najlažja in najtežja kombinacija teže

naprave in akumulatorskih baterij sta prikazani v tabeli.

Uporabna akumulatorska baterija in polnilnik

Baterijski vložek BL4020* / BL4025* / BL4040* / BL4050F

* : Priporočeni akumulator

Polnilnik DC40RA / DC40RB / DC40RC

• Nekatere zgoraj navedene akumulatorske baterije in polnilniki morda v vaši državi prebivališča niso na voljo.

OPOZORILO: Uporabljajte le zgoraj navedene akumulatorske baterije in polnilnike. Uporaba drugih

akumulatorskih baterij in polnilnikov lahko povzroči telesne poškodbe in/ali požar.

20 SLOVENŠČINA

Simboli

Naslednji simboli se lahko uporabljajo v povezavi s

strojem. Pred uporabo izdelka se obvezno seznanite z

njihovim pomenom.

Preberite navodila za uporabo.

Vzorec baterije, ki se uporablja za ta

izdelek.

Ni-MH

Li-ion Samo za države EU

Zaradi prisotnosti nevarnih komponent v

opremi imajo lahko uporabljena električna in

elektronska oprema, akumulatorji in baterije

negativen vpliv na okolje in zdravje ljudi.

Električnih in elektronskih naprav ali baterij

ne odlagajte med gospodinjske odpadke!

Skladno z evropsko Direktivo o odpadni

električni in elektronski opremi, o akumula-

torjih in baterijah ter odpadnih akumulator-

jih in baterijah ter njeno uporabo v državnih

zakonih morate rabljeno električno in

elektronsko opremo, baterije in akumula-

torje zbirati ločeno ter dostaviti na posebno

zbiralno mesto za komunalne odpadke, ki

deluje skladno s predpisi za zaščito okolja.

To nakazuje simbol prečrtanega smetnjaka

s kolesi, ki je natisnjen na opremi.

Predvidena uporaba

Orodje je namenjeno za zbiranje suhega prahu.

VARNOSTNA OPOZORILA

Varnostna opozorila za brezžični

čistilnik

OPOZORILO: POMEMBNO! POZORNO

PREBERITE vsa varnostna opozorila in navodila

pred uporabo. Zaradi neupoštevanja opozoril in

navodil lahko pride do električnega šoka, požara in/ali

hudih telesnih poškodb.

1.

Ne izpostavljajte dežju. Hranite v notranjih prostorih.

2. Ne dovolite igranja z napravo. Potrebna je

posebna pozornost, kadar napravo uporabljajo

otroci ali se uporablja v njihovi bližini.

3. Uporabljajte le v skladu z opisi v tem priroč-

niku. Uporabljajte le priključke, ki jih priporoča

proizvajalec.

4.

Ne uporabljajte naprave s poškodovanim akumu-

latorjem. Če naprava ne deluje, kot bi morala, je

padla, je poškodovana, pozabljena na prostem ali

je padla v vodo, jo odnesite v servis.

5. Ne rokujte z napravo z mokrimi rokami.

6. Ne vstavljajte predmetov v odprtine. Ne upo-

rabljajte z zamašenimi odprtinami; odstranite

prah, vlakna, lase in vse, kar bi lahko zmanj-

šalo pretok zraka.

7. Las, ohlapnih oblačil, prstov in nobenih delov

telesa ne približujte odprtinam in premikajočim

se delom.

8. Preden odstranite akumulator, izklopite vse

upravljalne elemente.

9.

Med čiščenjem na stopnicah bodite izjemno previdni.

10. Ne uporabljajte za pobiranje vnetljivih ali gor-

ljivih tekočin, kot je bencin, in ne uporabljajte v

območjih, kjer so lahko prisotne.

11. Za polnjenje uporabljajte samo polnilnik, ki ga

dobavlja proizvajalec.

12. Ne pobirajte ničesar, kar gori ali iz česar se vije

dim, kot so cigarete, vžigalice ali vroč pepel.

13. Ne uporabljajte brez vrečke za prah in/ali

nameščenih ltrov.

14. Akumulatorja ne polnite na prostem.

15. Orodje polnite samo s polnilnikom, ki ga je

določil proizvajalec. Polnilnik, ki je primeren za

eno vrsto akumulatorskega sklopa, lahko pomeni

nevarnost požara, če ga uporabljate z drugim

akumulatorskim sklopom.

16. Naprave uporabljajte samo s predpisano vrsto

akumulatorskih sklopov. Pri uporabi drugih

akumulatorskih sklopov lahko pride do telesnih

poškodb in požara.

17. Ko akumulatorskega sklopa ne uporabljate,

ga ne hranite ob kovinskih predmetih, kot so

sponke za papir, kovanci, ključi, žeblji, vijaki ali

drugi manjši kovinski predmeti, ki lahko pove-

žejo oba terminala.

18. V neprimernih pogojih lahko iz akumulatorja

uhaja tekočina; izogibajte se stiku. Če pride do

nenamernega stika, sperite z vodo.

19. Ne uporabljajte akumulatorskega sklopa ali

naprave, ki je poškodovana ali spremenjena.

Delovanje poškodovanih ali spremenjenih baterij

je nepredvidljivo in lahko povzroči požar, eksplo-

zijo ali telesne poškodbe.

20. Akumulatorskega sklopa oziroma naprave

ne izpostavljajte ognju ali previsoki tempera-

turi. Izpostavljenost ognju ali temperaturam nad

130 °C lahko povzroči eksplozijo.

21.

Upoštevajte vsa navodila glede polnjenja in

akumulatorskega sklopa oziroma naprave ne

polnite zunaj določenega temperaturnega raz-

pona. Nepravilno polnjenje ali polnjenje pri tempe-

raturah zunaj določenega razpona lahko povzroči

poškodbe baterije in poveča nevarnost požara.

SHRANITE TA NAVODILA.

DODATNA VARNOSTNA

PRAVILA

Ta naprava je namenjena le za domačo uporabo.

1. Pred uporabo pozorno preberite ta navodila za

uporabo in navodila za uporabo polnilnika.

2. Ne pobirajte naslednjih materialov:

— vročega materiala, kot so prižgane ciga-

rete ali iskre/kovinski prah, ki nastane

zaradi brušenja/rezanja kovin

— vnetljivih materialov, kot je bencin,

razredčilo, kerozin ali barva

— eksplozivnih materialov, npr. nitroglicerin

— vnetljivih materialov, kot je aluminij, cink,

magnezij, titan, fosfor ali celuloid

— mokre zemlje, vode olja ipd.

Pagina se încarcă ...

Makita CL003GZ Manual de utilizare

Makita CL003GZ Manual de utilizare

Lucrări conexe