Philips AC1214/10 Manual de utilizare

EN User manual 1

CS Příručka pro uživatele 19

HU Felhasználói kézikönyv 37

PL Instrukcja obsługi 57

RO Manual de utilizare 77

SK Príručka užívateľa 97

UK Посібник користувача 117

AC1214

4241 210 98192

1 2

J K L N OM

E

F

G

H

I

A

B

D

C

3s

Contents

1 Important 2

Safety 2

2 Your air purier 5

Product overview (g. a) 5

Controls overview (g. b) 5

3 Getting started 5

Installing the lters 5

Wi-Fi setup 6

4 Using the air purier 7

Understanding the air quality light 7

Turning on and o 7

Changing the fan speed 7

Light sensor 8

Night sensing mode 8

Setting the child lock 9

5 Cleaning 9

Cleaning the body of the air

purier 9

Cleaning the air quality sensor 9

Cleaning the pre-lter 10

6 Replacing the lters 11

Filter replacement indicator 11

Replacing the lters 11

Filter reset 12

1EN

English

7 Storage 12

8 Troubleshooting 13

9 Guarantee and service 16

Order parts or accessories 16

10 Notices 16

Electromagnetic elds (EMF) 16

Recycling 17

Software 17

Environmental friendly paper used. Thanks for your contribution to save trees.

2 EN

• If the power cord is

damaged, you must have

it replaced by Philips, a

service center authorized

by Philips, or similarly

qualied persons in order

to avoid a hazard.

• Do not use the appliance

if the plug, the power

cord, or the appliance

itself is damaged.

• This appliance can be

used by children aged

from 8 years and above

and persons with reduced

physical, sensory or

mental capabilities or

lack of experience and

knowledge if they have

been given supervision or

instruction concerning use

of the appliance in a safe

way and understand the

hazards involved. Child

shall not play with the

appliance. Cleaning and

maintenance shall not be

made by children without

supervision.

• Do not block the air inlet

and outlet, e.g. by placing

items on the air outlet or

in front of the air inlet.

1 Important

Safety

Read this user manual carefully before

you use the appliance, and save it for

future reference.

Danger

• Do not let water or any

other liquid or ammable

detergent enter the

appliance to avoid electric

shock and/or a re

hazard.

• Do not clean the

appliance with water,

any other liquid, or a

(ammable) detergent to

avoid electric shock and/

or a re hazard.

• Do not spray any

ammable materials

such as insecticides or

fragrance around the

appliance.

Warning

• Check if the voltage

indicated on the

appliance corresponds to

the local power voltage

before you connect the

appliance.

• Do not place anything on

top of the appliance.

• Do not sit or stand on

the appliance. Sitting or

standing on the appliance

may lead to potential

injury.

• Do not place the

appliance directly below

an air conditioner to

prevent condensation

from dripping onto the

appliance.

• Make sure all lters

are properly installed

before you switch on the

appliance.

• Only use the original

Philips lters specially

intended for this

appliance. Do not use any

other lters.

• Combustion of the lter

may cause inreversible

human hazard and/or

jeopardize other lives . Do

not use the lter as fuel or

for similar purpose.

• Avoid knocking against

the appliance (the air inlet

and outlet in particular)

with hard objects.

• Make sure that foreign

objects do not fall into

the appliance through the

air outlet.

• Standard WiFi interface

based on 802.11b/g/n at

2.4 GHz with a maximum

output power of 31.62 mW

EIRP.

Caution

• This appliance is not

a substitute for proper

ventilation, regular

vacuum cleaning, or use

of an extractor hood or

fan while cooking.

• If the power socket used

to power the appliance

has poor connections,

the plug of the appliance

becomes hot. Make

sure that you plug the

appliance into a properly

connected power socket.

• Always place and use

the appliance on a

dry, stable, level, and

horizontal surface.

• Leave at least 20cm

free space behind and

on both sides of the

appliance and leave at

least 30cm free space

above the appliance.

3EN

English

• To prevent interference,

place the appliance at

least 2 meters away from

electrical appliances that

use airborne radio waves

such as TVs, radios, and

radio-controlled clocks.

• The appliance is only

intended for household

use under normal

operating conditions.

• Do not use the appliance

in wet surroundings or in

surroundings with high

ambient temperatures,

such as the bathroom,

toilet, or kitchen.

• The appliance does

not remove carbon

monoxide (CO) or radon

(Rn). It cannot be used

as a safety device in

case of accidents with

combustion processes

and hazardous chemicals.

• If you need to move the

appliance, disconnect the

appliance from the power

supply rst.

• Do not move the

appliance by pulling its

power cord.

• Always lift or move the

appliance by the handle

on top of the appliance.

• Do not insert your ngers

or objects into the air

outlet or the air inlet to

prevent physical injury

or malfunctioning of the

appliance.

• Do not use this appliance

when you have used

indoor smoke-type insect

repellents or in places

with oily residues, burning

incense, or chemical

fumes.

• Do not use the appliance

near gas appliances,

heating devices or

replaces.

• Always unplug the

appliance after use

and before cleaning

or carrying out other

maintenance.

• Do not use the appliance

in a room with major

temperature changes,

as this may cause

condensation inside the

appliance.

4 EN

3 Getting started

Installing the lters

Note

• Make sure the air purier is unplugged

from the electrical outlet before

installing the lters.

• Make sure the side of the lter with the

tag is pointing towards you.

1 Pull the bottom part of the front

panel and gently lift to remove it

from the air purier (g. c).

2 Press the clip down (1) and pull the

pre-lter towards you (2) (g. d).

3 Remove all lters (g. e).

4 Remove all packaging materials

from the lters (g. f).

5 Place the thick lter (FY1410) into

the air purier and then the thin

active carbon lter (FY1413) (g. g).

The model numbers are shown on

each lter.

6 Attach the pre-lter back into the

air purier (g. h).

Note

• Make sure the side with the clip is

pointing towards you, and that all

hooks of the pre-lter are properly

attached to the purier.

7 Reattach the front panel by pressing

the top part of the panel onto the

top of the air purier (1). Then, gently

push the panel against the body of

the air purier (2) (g. i).

8 Wash your hands thoroughly after

installing lters.

2 Your air purifier

Congratulations on your purchase, and

welcome to Philips!

To fully benet from the support that

Philips oers, register your product at

www.philips.com/welcome.

Product overview (g. a)

A Control panel

B Air quality light

C Air outlet

D Air quality sensor

E

NanoProtect lter Series 3

(FY1410)

F

NanoProtect lter Active Carbon

(FY1413)

G Pre-lter

H Air inlet

I Front panel

Controls overview

(g. b)

J On/O button

K Night sensing mode button

L Display screen

M Wi-Fi indicator

N Fan speed button

O Child lock button

5EN

English

Note

• This instruction is only valid when

the air purier is being set up for the

rst time. If the network has changed

or the setup needs to be performed

again, consult section “Setting up the

Wi-Fi connection when the network

has changed” on page 6.

• If you want to connect more than one

air purier to your smart device, you

have to do this successively. Complete

the set up of one air purier before you

turn on the other air purier.

• Make sure that the distance between

your mobile device and the air

purier is less than 10 m without any

obstructions.

• This app supports the latest versions

of Android and iOS. Please check

www.philips.com/purier-compatibility

for the latest update of supported

operating systems and devices.

Setting up the Wi-Fi connection

when the network has changed

Note

• This applies when the default network

to which your purier is connected has

changed.

1 Put the plug of the air purier in the

power socket and touch

to turn

on the air purier.

2 Touch and simultaneously

for 3 seconds until you hear a beep.

» The air purier goes to pairing

mode.

» The Wi-Fi indicator

blinks

orange.

3 Follow the steps 4-5 in "Setting up

the Wi-Fi connection for the rst

time" section.

Wi-Fi setup

Setting up the Wi-Fi connection

for the rst time

1 Download and install the 'Air

Matters' app from the App Store or

Google Play.

2 Put the plug of the air purier in the

power socket and touch

to turn

on the air purier.

» The Wi-Fi indicator blinks

orange for the rst time.

3 Make sure that your mobile device

is successfully connected to your

Wi-Fi network.

4 Launch the 'Air Matters' app and

click on the ‘+’ on the top right of

the screen. Follow the onscreen

instructions to connect the air

purier to your network.

5 After the successful pairing and

connection, the Wi-Fi indicator

will light up white. If pairing

is not successful, consult the

troubleshooting section, or the

help section in the 'Air Matters'

app for extensive and up-to-date

troubleshooting tips.

6 EN

» When the air purier is warming

up, "

" displays on the screen.

» After measuring the air

quality for approximately

30 seconds, the air quality

sensor automatically selects

the appropriate air quality light

color.

» The air purier shows the

PM2.5 level and operates in

the Pollution mode with

displayed on the screen.

3 Touch and hold for 3 seconds to

switch o the air purier.

Note

• If the air purier stays connected to

the electrical outlet after turning OFF,

the air purier will operate under the

previous settings when turned ON

again.

• If the air purier accidentally shuts o

during running, it restarts automatically

and operates under previous settings

when the power supply is resumed.

• If the PM2.5 level is higher than 99, "--"

will be displayed on the screen.

Changing the fan speed

There are several fan speeds available.

You can choose the Pollution mode,

speed 1, 2, 3 or turbo mode (t).

Pollution mode

The specially designed pollution

mode can eectively remove airborne

pollutants such as PM2.5.

• Touch the fan speed button

to

select the Pollution mode (g. k).

» Auto (A) displays for 3 seconds

and then the

icon displays on

the screen.

4 Using the air

purifier

Understanding the air

quality light

PM2.5

level

Air quality

light color

Air quality

level

≤12 Blue Good

13-35 Blue-Purple Fair

36-55 Purple-Red Poor

>55 Red Very poor

The air quality light automatically goes

on when the air purier is switched on,

and lights up all colors in sequence.

After approximately 30 seconds, the

air quality sensors select the color that

corresponds to the surrounding air

quality of airborne particles.

Turning on and o

Note

• Always place the air purier on a

stable, horizontal, and level surface

with the front of the unit facing away

from walls or furniture.

• For optimum purication performance,

close doors and windows.

• Keep curtains away from the air inlet or

air outlet.

1 Put the plug of the air purier in the

power socket.

2 Touch to switch on the air purier

(g. j).

» The air purier beeps.

7EN

English

» If the air quality light is not blue,

the air purier operates under

turbo mode for a maximum of

10 minutes, the air quality light

blinks slow during this time, and

then goes to the night sensing

mode.

Auto activating the night

sensing mode

When the air purier operates in the

Pollution mode, if the light sensor

detects the lights in your room are

turned o, the air purier goes to the

night sensing mode automatically. The

air purier will adjust the fan speed in

real-time to make sure the air in your

room is good. The air quality light will be

dimmed.

Note

• The light sensor detects the lights in

your room after 11 hours in the night

sensing mode.

• If the lights in your room are turned

on, the air purier will quit the night

sensing mode and operate under the

previous mode. The air quality light

and the display will be on again.

• To exit the night sensing mode

manually, touch

or button.

Manual

• Touch the fan speed button

repeatedly to select the fan speed

you need (g. l).

Turbo (t)

In turbo mode, the air purier operates

on the highest speed.

• Touch the fan speed button

to

select the turbo mode (t) (g. m).

Light sensor

With the light sensor, the air purier can

work according to the ambient light.

When the ambient light dims for

10 seconds, all the lights on the control

panel will turn o slowly. During this

period, you can touch any of the

buttons, all lights will turn on again. If

you don't perform other operations

within 10 seconds, all lights will turn o.

After the ambient light becomes bright

and lasts at least for 10 seconds, all

lights will turn on again.

Night sensing mode

You can activate the night sensing

mode in two ways.

Activating the night sensing

mode manually

• Before you go to sleep, touch

manually to activate the night

sensing mode (g. n).

» If the air quality light is blue,

the air purier directly goes to

the night sensing mode. The air

purier operates quietly and the

air quality light will be dimmed.

8 EN

5 Cleaning

Note

• Always turn the air purier o and

unplug the air purier from the

electrical outlet before cleaning.

• Never immerse the air purier in water

or any other liquid.

• Never use abrasive, aggressive, or

ammable cleaning agents such as

bleach or alcohol to clean any part of

the air purier.

• Only the pre-lter is washable. The air

lter is not washable.

• Do not attempt to clean the lters or

air quality sensor with a vacuum.

Cleaning the body of the

air purier

Regularly clean the inside and outside

of the air purier to prevent dust from

collecting.

1 Use a soft, dry cloth to clean both

the interior and exterior of the air

purier.

2 The air outlet can also be cleaned

with a dry, soft cloth.

3 Detach the front cover from the air

purier and wash it under running

tap water.

Cleaning the air quality

sensor

Clean the air quality sensor every

2 months for optimal functioning of the

purier.

Setting the child lock

1

Touch and hold the child lock

button

for 3 seconds to activate

child lock (g. o).

» The child lock icon

displays

on the screen.

» When the child lock is on,

all the other buttons are not

responsive, only the child lock

icon

blinks.

2 Touch and hold the child lock

button

for 3 seconds again to

deactivate child lock (g. p).

» The child lock icon

disappears.

Note

• The child lock function is automatically

unlocked when the pre-lter cleaning

code or the lter replacement code

displays on the screen.

9EN

English

3 Press the clip down (1) and pull the

pre-lter towards you (2) (g. d).

4 If the pre-lter is very dirty, use a soft

brush to brush away the dust. Then

wash the pre-lter under running

tap water (g. v).

5 Allow the pre-lter to air dry

thoroughly before placing back in

the air purier.

Note

• To optimize the lifetime of the pre-

lter, make sure it dries completely

after cleaning.

• Wash your hands after handling the

lter.

6 Put the pre-lter back into the air

purier (g. h).

Note

• Make sure the side with the clip is

pointing towards you, and that all

hooks of the pre-lter are properly

attached to the air purier.

7 To reattach the front panel, press

the top part of the panel onto the

top of the air purier (1). Then, gently

push the panel against the body of

the air purier (2) (g. i).

8 Put the plug of the air purier in the

power socket.

9 Touch and hold the for

3 seconds to reset the pre-lter

cleaning time (g. w).

10 Wash your hands thoroughly after

installing lters.

Note

• If the air purier is used in a dusty

environment, it may need to be

cleaned more often.

• If the humidity level in the room is

very high, condensation may develop

on the air quality sensor and the air

quality light may indicate a more poor

air quality even though the air quality

is actually good. If this occurs, clean

the air quality sensor or use the air

purier on a manual speed setting.

1 Switch o the air purier and

unplug from the power socket.

2 Clean the air quality sensor inlet

and outlet with a soft brush (g. q).

3 Open the air quality sensor cover

(g. r).

4 Clean the air quality sensor, the

dust inlet and the dust outlet with a

damp cotton swab (g. s).

5 Dry all parts thoroughly with a dry

cotton swab.

6 Reattach the air quality sensor

cover (g. t).

Note

• Always keep air quality cover closed

while the air purier is working.

Cleaning the pre-lter

Clean the pre-lter when F0 is displayed

on the screen (g. u).

1 Switch o the air purier and

unplug from the power socket.

2 Pull the bottom part of the front

panel and then gently lift to remove

it from the air purier (g. c).

10 EN

Filter alert light

status

Action

A3 displays on

the screen

Replace

NanoProtect lter

Series 3 (FY1410)

C7 displays on

the screen

Replace

NanoProtect lter

Active Carbon

(FY1413)

A3 and C7

display on

the screen

alternately

Replace both lters

1 Turn o the air purier and unplug

from the power socket.

2 Take out the used air lter according

to the lter alert light status

displayed on the screen (g. x).

Discard used lters.

Note

• Do not touch the pleated lter surface,

or smell the lter as it has collected

pollutants from the air.

3 Remove all packaging material from

the new lter (g. f).

4 Place the new lters into the air

purier (g. g).

5 Put the plug of the air purier in the

power socket.

6 Touch and hold the for 3 seconds

to reset the lter lifetime counter

(g. y).

7 Wash your hands after changing a

lter.

6 Replacing the

filters

Filter replacement

indicator

This air purier is equipped with a

lter replacement indicator to make

sure that the air purication lter is in

optimal condition when the air purier

is operating. When the lters need to be

replaced, the lter code displays on the

screen.

If the lters are not replaced in time,

the air purier will stop operating and

automatically lock.

Replacing the lters

Note

• The air purication lters are not

washable nor vacuum cleanable.

• Always turn o the air purier and

unplug from the electrical outlet

before replacing the lters.

• Do not clean the lters with a vacuum

cleaner.

• If the pre-lter is damaged, worn or

broken, do not use. Visit

www.philips.com/support or contact

the Consumer Care Center in your

country.

11EN

English

7 Storage

1 Turn o the air purier and unplug

from the power socket.

2 Clean the air purier, air quality

sensor and pre-lter (see chapter

‘Cleaning’).

3 Let all parts dry thoroughly before

storing.

4 Wrap the lter and pre-lter

separately in air tight plastic bags.

5 Store the air purier, the lter and

pre-lter in a cool, dry location.

6 Always thoroughly wash hands after

handling lters.

Filter reset

You can replace lters even if there is

no lter replacement code displayed on

the screen. After replacing a lter, you

need to reset the lter lifetime counter

manually.

1 Touch and simultaneously for

3 seconds to enter the lter reset

mode (g. z).

» Code (A3) of the NanoProtect

lter Series 3 displays on the

screen.

2 Touch and hold for 3 seconds to

force reset the lter lifetime counter

of the NanoProtect lter Series 3

(g. y).

3 Code (C7) of the Nanoprotect lter

Active Carbon displays on the

screen after the lifetime counter of

the NanoProtect lter Series 3 has

been reset (g. {).

4 Touch and hold for 3 seconds to

force reset the lter lifetime counter

of the NanoProtect lter Active

Carbon and exit the lter reset

mode (g. |).

12 EN

8 Troubleshooting

This chapter summarizes the most common problems you could encounter with the

appliance. If you are unable to solve the problem with the information below, contact

the Consumer Care Center in your country.

Problem Possible solution

The air purier

does not work

even though it is

plugged in to the

power socket and

switched on.

• Check if the front cover is properly installed.

• The lter replacement code has been displaying on the

screen but you have not replaced the corresponding lter

yet. The appliance will be locked if you keep using the

expired lter. In this case, replace the lter and reset the

lter lifetime counter.

The air purier

does not work

even though it is

switched on.

• The lter replacement indicator has been on continuously

but you have not replaced the corresponding lter, and the

air purier is now locked. In this case, replace the lter and

reset the lter lifetime counter.

The air purier

accidentally

powers o.

• The air purier restarts automatically and goes to the

previous mode when the power resumes.

The airow that

comes out of

the air outlet

is signicantly

weaker than

before.

• The pre-lter is dirty. Clean the pre-lter (see chapter

"Cleaning").

The air quality

does not improve,

even though the air

purier has been

operating for a

long time.

• One of the lters has not been placed in the air purier or

the lter is not placed properly. Make sure that all lters

are properly installed in the following order, starting with

the innermost lter:

1) NanoProtect lter Series 3 (FY1410); 2) NanoProtect lter

Active Carbon (FY1413) 3) pre-lter.

• The air quality sensor is wet. Make sure that the air quality

sensor is clean and dry (see chapter "Cleaning").

The color of the air

quality light always

stays the same.

• The air quality sensor is dirty. Clean the air quality sensor

(see chapter "Cleaning").

13EN

English

Problem Possible solution

The air purier

produces a

unpleasant smell.

• The lter may produce smell after being used for a while

because of the absorption of indoor air. Remove the lter

and place it where it has direct sunlight and ventilation for

several hours. Re-install and try using it again. If the odor

remains, please replace the lter.

• If the air purier produces a burnt odor, switch OFF and

unplug from the electrical outlet. Contact Consumer Care

Center in your country.

The air purier is

loud.

• If the air purier is too loud, change the fan speed to a

lower fan speed level. When using the air purier in a

bedroom at night, choose the night sensing mode or select

a lower fan speed level.

The air purier still

indicates that I

need to replace a

lter, but I already

did.

• Perhaps you did not reset the lter lifetime counter. Plug

in the air purier, touch

to switch on the air purier, and

touch and hold the

for 3 seconds.

Error codes "E1",

"E2", "E3" or "E4"

displays on the

screen.

• The appliance has malfunctions. Contact the Consumer

Care Center in your country.

Which App I should

download?

• Please download and install the 'Air Matters' App

developed by FreshIdeas Studio from the App Store or

Google Play.

14 EN

Problem Possible solution

The Wi-Fi setup is

not successful.

• If the router your purier is connected to is dual – band

and currently it is not connecting to a 2.4GHz network,

please switch to another band of the same router (2.4GHz)

and try to pair your purier again. 5GHz networks are not

supported.

• Web authentication networks are not supported.

• Check if the purier is within range of the Wi-Fi router. You

can try to locate the air purier closer to the Wi-Fi router.

• Check if the network name is correct. The network name is

case-sensitive.

• Check if the Wi-Fi password is correct. The password is

case-sensitive.

• Retry the setup with the instructions in section ‘Set up the

Wi-Fi connection when the network has changed’.

• The Wi-Fi connectivity can be interrupted by electromagnetic

or other interferences. Keep the appliance away from other

electronic devices that may cause interferences.

• Check if the mobile device is in airplane mode. Make sure

to have the airplane mode deactivated when connecting

to the Wi-Fi network.

• Consult the help section in the App for extensive and up-

to-date troubleshooting tips.

15EN

English

9 Guarantee and

service

If you need information or if you have a

problem, please visit the Philips website

at www.philips.com or contact the

Philips Consumer Care Center in your

country (you nd its phone number

in the worldwide guarantee leaet). If

there is no Consumer Care Centre in

your country, go to your local Philips

dealer.

Order parts or

accessories

If you have to replace a part or want to

purchase an additional part, go to your

Philips dealer or visit www.philips.com/

support.

If you have problems obtaining the

parts, please contact the Philips

Consumer Care Center in your country

(you can nd its phone number in the

worldwide guarantee leaet).

10 Notices

Electromagnetic elds

(EMF)

This Philips appliance complies with all

applicable standards and regulations

regarding exposure to electromagnetic

elds.

Compliance with EMF

Koninklijke Philips N.V. manufactures

and sells many products targeted at

consumers, which, like any electronic

apparatus, in general have the ability

to emit and receive electromagnetic

signals.

One of Philips' leading Business

Principles is to take all necessary health

and safety measures for our products,

to comply with all applicable legal

requirements and to stay well within the

EMF standards applicable at the time of

producing the products.

Philips is committed to develop,

produce and market products that

cause no adverse health eects. Philips

conrms that if its products are handled

properly for their intended use, they

are safe to use according to scientic

evidence available today.

Philips plays an active role in the

development of international EMF

and safety standards, enabling Philips

to anticipate further developments in

standardization for early integration in

its products.

16 EN

Recycling

This symbol means that this product

shall not be disposed of with normal

household waste (2012/19/EU).

Follow your country’s rules for the

separate collection of electrical and

electronic products. Correct disposal

helps prevent negative consequences

for the environment and human health.

Software

App Store is a service mark of Apple Inc.

Google Play is a trademark of Google

Inc.

Air Matters app developed by Air

Matters Network Pty Ltd.

This Philips appliance and Air Matters

app applied multiple open source

softwares, copies of open source

software license text used in this

product can be derived from website:

www.philips.com/purier-compatibility.

17EN

English

Pagina se încarcă ...

Philips AC1214/10 Manual de utilizare

Philips AC1214/10 Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente