Philips AC5659/10R1 Manual de utilizare

1 2

Control buttons

Display panel

A B

C

D

E

G

H

F

4241 210 97864

AC5659

EN User manual 1

CS Příručka pro uživatele 19

HU Felhasználói kézikönyv 37

PL Instrukcja obsługi 57

RO Manual de utilizare 79

SK Príručka užívateľa 99

UK Посібник користувача 118

29

3

11

7

15

21

3’

19

5

13

9

17

6

14

10

3’

18

24

4

12

8

16

23

22

3’

20

3’

25

27

3’

31

35

33

3’

32

28

26

30

34

1EN

English

Contents

1 Important 2

Safety 2

2 Your air purier 5

Product overview (g. a) 5

Controls overview (g. b) 5

3 Getting started 6

Installing the lters 6

Wi-Fi connection 6

4 Using the air purier 7

Understanding the air quality light 7

Turning on and o 8

Changing the Auto mode setting 8

Changing the fan speed 9

Using the light on/o function 9

Switching the display indicator 10

Setting the child lock 10

5 Cleaning 11

Cleaning schedule 11

Cleaning the body of the air

purier 11

Cleaning the air outlet cover 11

Cleaning the air quality sensor 11

Cleaning the pre-lter 12

6 Replacing the lters 13

Filter replacement indicator 13

Replacing the lters 13

Filter reset 14

7 Storage 14

8 Troubleshooting 15

9 Guarantee and service 17

Order parts or accessories 17

10 Notices 17

Electromagnetic elds (EMF) 17

Recycling 18

Notice 18

Simplied EU declaration of

conformity 18

Environmental friendly paper used. Thanks for your contribution to save trees.

2 EN

1 Important

Safety

Read this user manual carefully before

you use the appliance, and save it for

future reference.

Danger

• Do not let water or any

other liquid or ammable

detergent enter the

appliance to avoid electric

shock and/or a re hazard.

• Do not clean the

appliance with water,

any other liquid, or a

(ammable) detergent to

avoid electric shock and/

or a re hazard.

• Do not spray any

ammable materials

such as insecticides or

fragrance around the

appliance.

Warning

• Check if the voltage

indicated on the

appliance corresponds to

the local power voltage

before you connect the

appliance.

• If the power cord is

damaged, you must have

it replaced by Philips, a

service center authorized

by Philips, or similarly

qualied persons in order

to avoid a hazard.

• Do not use the appliance

if the plug, the power cord,

or the appliance itself is

damaged.

• This appliance can be

used by children aged

from 8 years and above

and persons with reduced

physical, sensory or

mental capabilities or

lack of experience and

knowledge if they have

been given supervision or

instruction concerning use

of the appliance in a safe

way and understand the

hazards involved. Child

shall not play with the

appliance. Cleaning and

maintenance shall not be

made by children without

supervision.

• Do not block the air inlet

and outlet, e.g. by placing

items on the air outlet or

in front of the air inlet.

• Make sure that foreign

objects do not fall into the

appliance through the air

outlet.

3EN

English

• Standard WiFi interface

based on 802.11b/g/n at

2.4 GHz with a maximum

output power of 31.62 mW

EIRP.

Caution

• This appliance is not

a substitute for proper

ventilation, regular

vacuum cleaning, or use

of an extractor hood or

fan while cooking.

• If the power socket used

to power the appliance

has poor connections,

the plug of the appliance

becomes hot. Make

sure that you plug the

appliance into a properly

connected power socket.

• Always place and use the

appliance on a dry, stable,

level, and horizontal

surface.

• Leave at least 20cm free

space behind and on both

sides of the appliance

and leave at least 30cm

free space above the

appliance.

• Do not place anything on

top of the appliance.

• Do not sit or stand on

the appliance. Sitting or

standing on the appliance

may lead to potential

injury.

• Do not place the

appliance directly below

an air conditioner to

prevent condensation

from dripping onto the

appliance.

• Make sure all lters

are properly installed

before you switch on the

appliance.

• Only use the original

Philips lters specially

intended for this

appliance. Do not use any

other lters.

• Combustion of the lter

may cause inreversible

human hazard and/or

jeopardize other lives. Do

not use the lter as fuel or

for similar purpose.

• Avoid knocking against

the appliance (the air inlet

and outlet in particular)

with hard objects.

• Always lift or move the

appliance by the handle

on back side of the

appliance.

4 EN

• To prevent interference,

place the appliance at

least 2 meters away from

electrical appliances that

use airborne radio waves

such as TVs, radios, and

radio-controlled clocks.

• The appliance is only

intended for household

use under normal

operating conditions.

• Do not use the appliance

in wet surroundings or in

surroundings with high

ambient temperatures,

such as the bathroom,

toilet, or kitchen.

• The appliance does

not remove carbon

monoxide (CO) or radon

(Rn). It cannot be used

as a safety device in

case of accidents with

combustion processes

and hazardous chemicals.

• If you need to move the

appliance, disconnect the

appliance from the power

supply rst.

• Do not move the

appliance by pulling its

power cord.

• Always cleanse your

hands after changing the

lters.

• Do not insert your ngers

or objects into the air

outlet or the air inlet to

prevent physical injury

or malfunctioning of the

appliance.

• Do not use this appliance

when you have used

indoor smoke-type insect

repellents or in places

with oily residues, burning

incense, or chemical

fumes.

• Do not use the appliance

near gas appliances,

heating devices or

replaces.

• Always unplug the

appliance after use

and before cleaning,

or carrying out other

maintenance or replacing

the lters.

• Do not use the appliance

in a room with major

temperature changes,

as this may cause

condensation inside the

appliance.

5EN

English

Controls overview

(g. b)

Control buttons

I Power on/o button

J Light on/o button

K Auto mode button

L Fan speed button

M Child lock button

N Reset button

Display panel:

Sleep mode

Speed 1

Speed 2

Speed 3

Turbo

Filter replacement alert

Pre-lter cleaning alert

Wi-Fi indicator

Gas display

PM2.5 display

Indoor Allergen Index

Pollution mode

Allergen mode

Bacteria & Virus mode

Child lock indicator

2 Your air purifier

Congratulations on your purchase, and

welcome to Philips!

To fully benet from the support that

Philips oers, register your product at

www.philips.com/welcome.

Product overview (g. a)

A Control buttons

B Air outlet cover

C Air quality sensor

D Display panel

E

NanoProtect lter Series 3

(FY5185)

F

NanoProtect lter Active Carbon

(FY5182)

G Pre-lter

H Side covers

6 EN

3 Getting started

Installing the lters

Note

• Make sure the air purier is unplugged

from the electrical outlet before

installing the lters.

• Make sure the side of the lter with the

tag is pointing towards you.

1 Pull the top part of the side panel to

remove it from the air purier

(g. c).

2 Press the two clips down (1) and pull

the pre-lter towards you (2)

(g. d).

3 Remove all lters (g. e).

4 Remove all packaging materials

from the lters (g. f).

5 Place the thick lter (FY5185) into

the air purier and then the thin

Active Carbon lter (FY5182). The

model numbers are shown on each

lter (g. g).

6 Attach the pre-lter back into the

air purier (g. h).

Note

• Make sure the side with the two clips

is pointing towards you, and that all

hooks of the pre-lter are properly

attached to the purier.

7 Reattach the front panel by pressing

the top part of the panel onto the

top of the air purier (1). Then, gently

push the panel against the body of

the air purier (2) (g. i).

8 Repeat the above steps and

assemble the lter for the other side

of the air purier.

9 Wash your hands thoroughly after

installing lters.

Wi-Fi connection

Setting up the Wi-Fi connection

for the rst time

1 Download and install the Philips

"Clean Home+" app from the App

Store or Google Play.

2 Put the plug of the air purier in the

power socket and touch

to turn

on the air purier.

» The Wi-Fi indicator

blinks

orange for the rst time.

3 Make sure that your smartphone or

tablet is successfully connected to

your Wi-Fi network.

4 Launch the "Clean Home+" app and

click on "Connect a New Device"

or press the "+" button on the top

of the screen. Follow the onscreen

instructions to connect the air

purier to your network.

5 After the successful pairing and

connection, the Wi-Fi indicator

will light up white. If pairing

is not successful, consult the

troubleshooting section, or the

help section in the "Clean Home+"

App for extensive and up-to-date

troubleshooting tips.

7EN

English

4 Using the air

purifier

Understanding the air

quality light

PM2.5

level

Air quality

light color

Air quality

level

≤12 Blue Good

13-35 Blue-Purple Fair

36-55 Purple-Red Poor

>55 Red Very poor

The air quality light automatically goes

on when the air purier is switched on,

and lights up all colors in sequence.

After approximately 30 seconds, the

air quality sensors select the color that

corresponds to the surrounding air

quality of airborne particles.

PM2.5

AeraSense sensing technology

accurately detects and quickly responds

to even the slightest particle change in

the air. It provides you with reassurance

with real-time PM2.5 feedback.

IAI

The professional-grade AeraSense

sensor detects the level of indoor air

allergen and with numerical feedback

from 1 to 12 the potential risk level of

indoor air allergens can be displayed. 1

indicates best air quality.

GAS

With an advanced as sensor, a display

ranging from L1 to L4 shows the density

level of potential harmful gases (incl.

VOC, odor, etc.) detected. L1 indicates

best air quality.

Note

• This instruction is only valid when

the air purier is being set up for the

rst time. If the network has changed

or the setup needs to be performed

again, consult section "Reset the Wi-Fi

connection" on page 7.

• If you want to connect more than

one air purier to your smartphone

or tablet, you have to do this one by

one. Complete the set up of one air

purier before you turn on the other air

purier.

• Make sure that the distance between

your smartphone or tablet and the air

purier is less than 10 m without any

obstructions.

• This App supports the latest versions

of Android and iOS. Please check

www.philips.com/cleanhome for the

latest update of supported operating

systems and devices.

Reset the Wi-Fi connection

Note

• This applies when the default network

to which your purier is connected has

changed.

• Reset the Wi-Fi connection when your

default network has changed.

1 Put the plug of the air purier in the

power socket and touch

to turn

on the air purier.

2 Touch and simultaneously for

3 seconds until you hear a beep.

» The air purier goes to pairing

mode.

» The Wi-Fi indicator

blinks

orange.

3 Follow the steps 4-5 in "Setting up

the Wi-Fi connection for the rst

time" section.

8 EN

Turning on and o

Note

• Always place the air purier on a

stable, horizontal, and level surface

with the front of the unit facing away

from walls or furniture.

• For optimum purication performance,

close doors and windows.

• Keep curtains away from the air inlet or

air outlet.

1 Put the plug of the air purier in the

power socket.

2 Touch to switch on the air purier

(g. j).

» The air purier beeps.

» The air purier operates under

the Pollution mode by default.

» When the air purier is warming

up, "

" displays on the

screen. After measuring the

particulate matter only in the

air, the air purier shows the

PM2.5 level and operates in the

auto mode with

displayed on

the screen (g. k).

» After 30 seconds, the air

purier shows the IAI level

on the screen. The air quality

sensor automatically selects

the appropriate air quality light

color.

3 Touch and hold for 3 seconds to

switch o the air purier.

Note

• If the air purier stays connected to

the electrical outlet after turning OFF,

the air purier will operate under the

previous settings when turned ON

again.

Changing the Auto mode

setting

You can choose the Pollution mode

(

), Allergen mode ( ), or the

Bacteria & Virus mode ( ).

Pollution mode

The specially designed pollution

mode can eectively remove airborne

pollutants such as PM2.5.

• Touch the Auto mode button

to

select the Pollution mode (g. l).

» Auto (

) and display on the

screen.

Allergen mode

The extra-sensitive allergen mode

is designed to react to even a small

change in allergen levels in the

surrounding air.

• Touch the Auto mode button

to

select the Allergen mode (g. m).

» Auto (

) and display on the

screen.

Bacteria & Virus mode

The bacteria & virus mode boosts the

airow to quickly reduce bacteria &

viruses.

• Touch the Auto mode button

to

select the Bacteria & Virus mode

(g. n).

» Auto (

) and display on the

screen.

9EN

English

Turbo (t)

In turbo mode, the air purier operates

on the highest speed.

• Touch the fan speed button

to

select the turbo mode (

) (g. q).

» The "

" displays on the screen.

» The turbo speed indicator

goes on.

Using the light on/o

function

With the light dimming button, you can

switch on or o the air quality light,

the display screen and the function

indicator if desired.

1 Touch the light dimming button

once, the air quality light will be

dimmed.

2 Touch the light dimming button

again, the air quality light will go o.

3 Touch the light dimming button

for the third time, all lights will be on

again.

Changing the fan speed

In addition to the Auto modes, there are

several fan speeds available.

When using the manual fan speed

settings, the purier will still monitor the

air quality, but it will not automatically

adjust the fan speed if it detects

changes in the air quality.

Sleep mode ( )

In sleep mode, the air purier operates

quietly at a very low speed.

• Touch the fan speed button

to

select the sleep mode (SL) (g. o).

» The "

" displays on the

screen.

» The sleep mode indicator

goes on.

Manual

• Touch the fan speed button

repeatedly to select the fan speed

you need (g. p):

(Speed 1)

(Speed 2)

(Speed 3)

Tips

• If the air quality light lights up blue,

it indicates that the air quality is

good, and you can select a lower fan

speed. On the other hand, if the air

quality light lights up red-purple or

red, it indicates that the air quality

is unhealthy, and you can select a

higher fan speed to purify the air more

quickly.

10 EN

Setting the child lock

1

Touch and hold the child lock

button

for 3 seconds to activate

child lock (g. u).

» The child lock icon

displays

on the screen.

» When the child lock is on,

all the other buttons are not

responsive.

2 Touch and hold the child lock

button

for 3 seconds again to

deactivate child lock.

» The child lock icon

disappears.

Note

• You can still control the appliance

through the App even child lock is

activated.

Switching the display

indicator

The air purier has three display

indicators, PM2.5 index, IAI index and

Gas level.

Note

• The air purier operates in PM2.5 index

by default.

1 Touch the light dimming button

for 3 seconds to switch to IAI display

mode (g. r) .

» The IAI indicator and the actual

IAI index display on the screen.

2 Touch the light dimming button

for 3 seconds again to switch to Gas

level display (g. s).

» The Gas indicator and the

actual Gas level display on the

screen.

3 Touch the light dimming button

for 3 seconds again to switch back

to PM2.5 display mode (g. t).

» The PM2.5 level displays on the

screen.

Note

• It is possible that the air quality light

may still be red even if the PM2.5

index is very low. It's normal. This is

because that at least one of the index

( the IAI index or Gas level) is high that

turns the air quality light to red. The

appliance real-time displays the air

quality index with the highest risk.

11EN

English

5 Cleaning

Note

• Always turn the air purier o and

unplug from the electrical outlet

before cleaning.

• Never immerse the air purier in water

or any other liquid.

• Never use abrasive, aggressive, or

ammable cleaning agents such as

bleach or alcohol to clean any part of

the air purier.

• Only the pre-lter is washable. The air

lters are not washable.

• Do not attempt to clean the lters or

air quality sensor with a vacuum.

Cleaning schedule

Frequency Cleaning method

When

necessary

Wipe the surface of

the appliance with

a soft dry cloth

Clean the air outlet

cover

Every two

months

Clean the air quality

sensor with a dry

cotton swab

When the pre-

lter cleaning

indicator

lights up and

F0 displays on

the screen

Clean the pre-lter

Cleaning the body of the

air purier

Regularly clean the inside and outside

of the air purier to prevent dust from

collecting.

1 Use a soft, dry cloth to clean both

the interior and exterior of the air

purier.

2 The air outlet can also be cleaned

with a dry, soft cloth.

Cleaning the air outlet

cover

1

To unlock the air outlet cover, grab

the handle on the cover and pull

the cover up (g. v).

2 Clean the cover with a brush (g. w).

3 To reattach the cover, mount it onto

the top of the appliance rst, and

then push the side with the handle

towards the appliance (g. x).

Cleaning the air quality

sensor

Clean the air quality sensor every

2 months for optimal functioning of the

purier.

Note

• If the air purier is used in a dusty

environment, it may need to be

cleaned more often.

• If the humidity level in the room is

very high, condensation may develop

on the air quality sensor and the air

quality light may indicate a poorer air

quality even though the air quality is

actually good. If this occurs, clean the

air quality sensor or use the air purier

on a manual speed setting.

12 EN

1 Switch o the air purier and unplug

from the power socket.

2 Clean the air quality sensor inlet and

outlet with a soft brush (g. y).

3 Open the air quality sensor cover

(g. z).

4 Clean the air quality sensor, the

dust inlet and the dust outlet with a

damp cotton swab (g. {).

5 Dry all parts thoroughly with a dry

cotton swab.

6 Reattach the air quality sensor cover

(g. |).

Cleaning the pre-lter

Clean the pre-lter when F0 is displayed

on the screen and the pre-lter cleaning

indicator

is on (g. }).

1 Switch o the air purier and unplug

from the power socket.

2 Pull the top part of the side panel to

remove it from the air purier

(g. c).

3 Press the two clips down (1) and pull

the pre-lter towards you (2)

(g. d).

4 If the pre-lter is very dirty, use a

soft brush to brush away the dust.

Then wash the pre-lter under

running tap water (g. ~).

5 Allow the pre-lter to air dry

thoroughly before placing back in

the air purier.

6 Put the pre-lter back into the air

purier (g. h).

Note

• To optimize the lifetime of the pre-lter,

make sure it air dries completely after

cleaning.

• Wash your hands after handling the lter.

• Make sure the side with the two clips is

pointing towards you, and that all hooks

of the pre-lter are properly attached to

the air purier.

7 To reattach the front panel, press the

top part of the panel onto the top of

the air purier (1). Then, gently push

the panel against the body of the air

purier (2) (g. i).

8 Put the plug of the air purier in the

power socket.

9 Touch the button to switch on the

appliance.

10 Touch and hold the reset button

for 3 seconds to reset the pre-lter

cleaning time.

11 Wash your hands thoroughly after

installing lters.

13EN

English

Filter alert light

status

Action

A3 displays on the

screen and the

lter replacement

alert

goes on

Replace the

NanoProtect

lter Series 3

(FY5185)

C7 displays on the

screen and the

lter replacement

alert

goes on

Replace the

NanoProtect lter

Active Carbon

(FY5182)

A3 and C7 display

on the screen

alternately and the

lter replacement

alert

goes on

Replace both

lters

1 Turn o the air purier and unplug

from the power socket.

2 Take out the used air lter according

to the lter alert light status

displayed on the screen. Discard

used lters (g. ).

Note

• Do not touch the pleated lter surface,

or smell the lters as they have

collected pollutants from the air.

3 Remove all packaging material from

the new lters (g. f).

4 Place the new lters into the air

purier (g. g).

5 Put the plug of the air purier in the

power socket.

6 Touch and hold the reset button

for 3 seconds to reset the lter

lifetime counter.

6 Replacing the

filters

Filter replacement

indicator

This air purier is equipped with a

lter replacement indicator to make

sure that the air purication lter is in

optimal condition when the air purier

is operating. When the lters need to be

replaced, the lter code displays on the

screen (see Filter alert chart).

If the lters are not replaced in time,

the air purier will stop operating and

automatically lock to protect the air

quality in the room. Replace the lters

as soon as possible according to the

lter code.

Replacing the lters

Note

• The air lters are not washable or

reusable.

• Always turn o the air purier and

unplug from the electrical outlet

before replacing the lters.

• Do not clean the lters with a vacuum.

• If the pre-lter is damaged, worn or

broken, do not use. Visit

www.philips.com/support or contact

the Consumer Care Center in your

country.

14 EN

7 Storage

1 Turn o the air purier and unplug

from the power socket.

2 Clean the air purier, air quality

sensor and pre-lter (see chapter

‘Cleaning’).

3 Let all parts air dry thoroughly

before storing.

4 Wrap the lters and pre-lters

separately in air tight plastic bags.

5 Store the air purier, lters and pre-

lters in a cool, dry location.

6 Always thoroughly wash hands after

handling lters.

Note

• Wash your hands after changing a lter.

• This air purier has no other user-

serviceable parts. For assistance,

contact the Consumer Care Center in

your country.

Filter reset

You can replace lters even if there is

no lter replacement code displayed on

the screen. After replacing a lter, you

need to reset the lter lifetime counter

manually.

1 Touch and simultaneously for

3 seconds to enter the lter reset

mode (g. €).

» Code (A3) of the NanoProtect

lter Series 3 displays on the

screen.

2 Touch and hold for 3 seconds to

force reset the lter lifetime counter

of the NanoProtect lter Series 3

(g. ).

3 Code (C7) of the NanoProtect lter

Active Carbon displays on the

screen after the lifetime counter of

the NanoProtect lter Series 3 has

been reset (g. ‚).

4 Touch and hold for 3 seconds to

force reset the lter lifetime counter

of the NanoProtect lter Active

Carbon and exit the lter reset

mode (g. ƒ).

15EN

English

8 Troubleshooting

This chapter summarizes the most common problems you could encounter with the

appliance. If you are unable to solve the problem with the information below, contact

the Consumer Care Center in your country.

Problem Possible solution

The air purier

does not work

even though it is

switched on.

• Check if the top cover is properly installed.

• The lter replacement indicator has been on continuously

but you have not replaced the corresponding lter, and the

air purier is now locked. In this case, replace the lter and

reset the lter lifetime counter.

The airow that

comes out of

the air outlet is

signicantly weaker

than before.

• The pre-lter is dirty. Clean the pre-lter (see chapter

"Cleaning").

The air quality

does not improve,

even though the air

purier has been

operating for a long

time.

• Check if the packing material is removed from the lters.

• One of the lters has not been placed in the air purier

or a lter is not placed properly. Make sure that all lters

are properly installed in the following order, starting with

the innermost lter: 1) NanoProtect lter Series 3 (FY5185);

2) NanoProtect lter Active Carbon (FY5182); 3) pre-lter.

• The air quality sensor is wet. Make sure that the air quality

sensor is clean and dry (see chapter "Cleaning").

The color of the air

quality light always

stays the same.

• The air quality sensor is dirty. Clean the air quality sensor

(see chapter "Cleaning").

The air purier

produces a

unpleasant smell.

• The rst few times you use the appliance, it may produce

a plastic smell. This is normal. However, if the appliance

produces a burnt smell, contact your Philips dealer

or an authorized Philips service center. The lter may

produce smell after being used for a while because of

the absorption of indoor air. Remove the lter and place

it where it has direct sunlight and ventilation for several

hours. Re-install and try using it again. If the odor remains,

please replace the lter.

The air purier is

loud.

• If the air purier is too loud, change the fan speed to a

lower fan speed level. When using the air purier in a

bedroom at night, choose the sleep mode.

16 EN

Problem Possible solution

The air purier still

indicates that I

need to replace a

lter, but I already

did.

• Perhaps you did not reset the lter lifetime counter. Plug

in the air purier, touch

to switch on the air purier, and

touch and hold the reset button

for 3 seconds (see

Filter reset section).

Error code "E1"

displays on the

screeen.

• The motor has malfunctions. Contact the Consumer Care

Center in your country.

Error codes "E2",

"E3", "E4" or "E5"

displays on the

screen.

• The sensor has malfunctions. Contact the Consumer Care

Center in your country.

Which App I should

download?

• Download and install the Philips "Clean Home+" app from

the App Store or Google Play.

The Wi-Fi setup is

not successful.

• If the router your purier is connected to is dual-band

and currently it is not connecting to a 2.4GHz network,

please switch to another band of the same router (2.4GHz)

and try to pair your purier again. 5GHz networks are not

supported.

• Web authentication networks are not supported.

• Check if the purier is within range of the Wi-Fi router. You

can try to locate the air purier closer to the Wi-Fi router.

• Check if the network name is correct. The network name is

case-sensitive.

• Check if the Wi-Fi password is correct. The password is

case-sensitive.

• Retry the setup with the instructions in section ‘Set up the

Wi-Fi connection when the network has changed’.

• The Wi-Fi connectivity can be interrupted by electromagnetic

or other interferences. Keep the appliance away from other

electronic devices that may cause interferences.

• Check if the mobile device is in airplane mode. Make sure

to have the airplane mode deactivated when connecting

to the Wi-Fi network.

• Consult the help section in the App for extensive and up-

to-date troubleshooting tips.

17EN

English

9 Guarantee and

service

If you need information or if you have

a problem, please visit the Philips

website at www.philips.com or contact

the Philips Consumer Care Center in

your country (you nd its phone number

in the worldwide guarantee leaet). If

there is no Consumer Care Centre in

your country, go to your local Philips

dealer.

Order parts or

accessories

If you have to replace a part or want to

purchase an additional part, go to your

Philips dealer or visit

www.philips.com/support.

If you have problems obtaining the

parts, please contact the Philips

Consumer Care Center in your country

(you can nd its phone number in the

worldwide guarantee leaet).

10 Notices

Electromagnetic elds

(EMF)

This Philips appliance complies with all

applicable standards and regulations

regarding exposure to electromagnetic

elds.

Compliance with EMF

Koninklijke Philips N.V. manufactures

and sells many products targeted at

consumers, which, like any electronic

apparatus, in general have the ability

to emit and receive electromagnetic

signals.

One of Philips' leading Business

Principles is to take all necessary health

and safety measures for our products,

to comply with all applicable legal

requirements and to stay well within the

EMF standards applicable at the time of

producing the products.

Philips is committed to develop,

produce and market products that

cause no adverse health eects. Philips

conrms that if its products are handled

properly for their intended use, they

are safe to use according to scientic

evidence available today.

Philips plays an active role in the

development of international EMF

and safety standards, enabling Philips

to anticipate further developments in

standardization for early integration in

its products.

18 EN

Recycling

This symbol means that this product

shall not be disposed of with normal

household waste (2012/19/EU).

Follow your country’s rules for the

separate collection of electrical and

electronic products. Correct disposal

helps prevent negative consequences

for the environment and human health.

Notice

App Store is a service mark of Apple Inc.

Google Play is a trademark of Google

Inc.

This Philips appliance and Clean

Home+ app applied multiple open

source softwares, Copies of open

source software license text used in this

product can be derived from website-

www.philips.com/cleanhome.

Simplied EU declaration

of conformity

Hereby, Philips Consumer Lifestyle B.V.

declares that the radio equipment type

AC5659 is in compliance with Directive

2014/53/EU. The full text of the EU

declaration of conformity is available at

the following internet address:

www.philips.com.

Pagina se încarcă ...

Philips AC5659/10R1 Manual de utilizare

Philips AC5659/10R1 Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente