Parkside PDSSA 18 A1 Original Instructions Manual

MAȘINĂ DE ÎNȘURUBAT CU IMPACT

TANGENŢIAL ȘI ACUMULATOR

Traducerea instrucţiunilor de utilizare originale

АКУМУЛАТОРНА УДАРНА

БОРМАШИНА

Превод на оригиналното ръководство за експлоатация

CORDLESS IMPACT DRIVER

Translation of the original instructions

CORDLESS IMPACT DRIVER PDSSA 18 A1

IAN 273480

AKKU-DREHSCHLAGSCHRAUBER

Originalbetriebsanleitung

ΚΡΟΥΣΤΙΚΟ ΔΡΑΠΑΝΟΚΑΤΣΑΒΙΔΟ

ΜΠΑΤΑΡΙΑΣ

Μετάφραση των αυθεντικών οδηγιών λειτουργίας

273480_par_Akku-Drehschlagschrauber_cover_RO_BG_GR.indd 2 23.11.15 12:06

GB Translation of the original instructions Page

RO Traducerea instrucţiunilor de utilizare originale Pagina

BG Превод на оригиналното ръководство за експлоатация Страница

GR Μετάφραση των αυθεντικών οδηγιών λειτουργίας Σελίδα

DE / AT / CH Originalbetriebsanleitung Seite

Before reading, unfold the page containing the illustrations and familiarise yourself with all

functions of the device.

Înainte de a citi instrucţiunile, priviţi imaginile şi familiarizaţi-vă cu toate funcţiile aparatului.

Преди да прочетете отворете страницата с фигурите и след това се запознайте с всички

функции на уреда.

Πριν ξεκινήσετε την ανάγνωση, ανοίξτε τη σελίδα με τις εικόνες και εξοικειωθείτε με όλες τις

λειτουργίες της συσκευής.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend

mit allen Funktionen des Gerätes vertraut.

PACT

Traducerea instrucţiunilor de utilizare originale

Μετάφραση των αυθεντικών οδηγιών λειτουργίας

273480_par_Akku-Drehschlagschrauber_cover_RO_BG_GR.indd 3 23.11.15 12:06

4

17

31

47

62

1 2 3

4

5

6

7

89

10

15

12

11

13

14

4

G B

Content

Introduction .................................4

Intended purpose .........................4

General description ......................5

Extent of the delivery ........................5

Overview ........................................5

Functional description .......................5

Technical data ..............................5

Safety instructions ........................6

Symbols and icons ...........................6

Symbols on the appliance .................6

Symbols on the battery .....................6

Symbols on the recharger ..................6

General safety instructions for power

tools ...............................................7

Charging the battery ..................11

Removing / inserting the battery .... 12

Recharging the battery .................. 12

Used batteries .............................. 12

Checking the battery charge level ... 12

Assembling ................................12

Attaching the belt clip ................... 12

Operation ..................................13

1. Direction switch ......................... 13

2. Using the tool holder .................. 13

3. Switching on/off ........................ 13

Cleaning and maintenance .........13

Cleaning ..................................... 13

Maintenance ................................ 14

Storage ......................................14

Disposal and protection of the

environment ..............................14

Guarantee .................................14

Repair Service ............................15

Service-Center ............................16

Importer ....................................16

Replacement parts/accessories ...16

Translation of the original EC

declaration of conformity ............77

Introduction

Congratulations on the purchase of your

new device. With it, you have chosen a

high quality product.

During production, this equipment has

been checked for quality and subjected to

a nal inspection. The functionality of your

equipment is therefore guaranteed.

The operating instructions constitute part of

this product. They contain important infor-

mation on safety, use and disposal.

Before using the product, familiarise your-

self with all of the operating and safety

instructions. Use the product only as de-

scribed and for the applications specied.

Keep this manual safely and in the event

that the product is passed on, hand over

all documents to the third party.

Intended purpose

The device is designed for inserting and

releasing bolts as well as tightening and

releasing nuts. The appliance must only be

used by adults. Young people aged 16

and over may only use the trimmer under

adult supervision.

The user or operator is responsible for ac-

cidents causing injury to other people or

damage to property.

The manufacturer cannot be held liable

for damage when the trimmer is not used

in conformity with its intended purpose or

due to incorrect operation.

5

G B

General description

Extent of the delivery

Carefully unpack the appliance and check

that it is complete:

- Cordless impact screwdriver

- Belt clip with screw

- Battery-charger

- Battery

- Bit holder

- Adapter for 1/4“ square

- Translation of the original instructions for

use

The illustrations are on the

front fold-out page.

Overview

1 Tool holder

2 Locking sleeve

3 Direction of rotation switch

4 Belt clip

5 Battery Indicator

6 Charger power supply cord

7 Charger

8 Green LED

9 Red LED

10 Battery

11 Battery release button

12 On/off switch

13 LED working light

14 Adapter for 1/4“ square

15 Bit holder

Functional description

The cordless impact screwdriver has clock-

wise/anticlockwise rotation, a 1/4“

hexagon socket bit holder and an LED

work light.

The rotary impact function of the device

converts the force of the motor into uniform

rotary impacts. The striking mechanism

switches on when tightening and loosening

materials.

The battery included in the scope of de-

livery can also be used for the cordless

reciprocating saw PSSA 18 A1 and the

cordless angular grinder

PWSA 18 A1.

Technical data

Appliance

Motor voltage...........................18 V

Idling speed .....................0-2800 min

-1

Nominal impact rate .........0-3600 min

-1

max. torque for hard screw-driving

applications according to ISO 5393

............................................ 180 Nm

Tool holder ...................................1/4“

Weight (without battery charger) 1.54 kg

Sound power level

(L

pA

) ............. 68.72 dB (A), K

pA

= 3 dB

Sound power level (L

WA

)

Guaranteed ...................... 83 dB (A)

Measured ......79.72 dB (A); K

WA

= 3 dB

Vibration (a

h

) ... 2.455 m/s

2

, K= 1.5 m/s

2

Battery (Li-Ion) ............PAP18-1,5A1

Number of battery cells ..................... 5

Nominal voltage .......................18 V

Capacity .................................. 1,5 Ah

Charging time .......................... ca. 1 h

6

G B

Recharger .................. JLH-H15O-18

Nominal consumption ..................40 W

Uptake voltage/Input

....................... 100-240 V~, 50-60 Hz

Voltage output/Output

................................18 V

1500 mA

Protection class .............................

II

Protection category ...................... IPX0

Noise and vibration values have been

determined according to the standards and

regulations mentioned in the declaration of

conformity.

Technical and optical changes may be

undertaken in the course of further devel-

opment without notice. All dimensions,

references and information in this instruc-

tion manual are therefore not guaranteed.

Legal claims made on the basis of the

instruction manual can therefore not be

considered as valid.

The stated vibration emission value was

measured in accordance with a standard

testing procedure and may be used to com-

pare one power tool to another.

The stated vibration emission value may

also be used for a preliminary exposure

assessment.

Warning: The vibration emission

value may differ during actual use

of the power tool from the stated

value depending on the manner in

which the power tool is used.

Safety precautions aimed at protect-

ing the user should be based on esti-

mated exposure under actual usage

conditions (all parts of the operating

cycle are to be considered, includ-

ing, for example, times during which

the power tool is turned off and

times when the tool is turned on but

is running idle).

Safety instructions

Ensure that the safety instructions are ob-

served when operating the appliance.

Symbols and icons

Symbols on the appliance:

Carefully read these Operating In-

structions.

Caution! Hot surface.

Risk of burns.

Electrical appliances must not be dis-

posed of with the domestic waste.

Symbols on the battery:

Do not dispose of

batteries in house-

hold waste, re or

water.

Do not subject the battery to strong

sunlight over long periods and

do not leave it on a heater (max.

45°C).

Take batteries to an old battery

collection point where they will

be recycled in an environmentally

friendly manner.

Symbols on the recharger:

Warning!

Before using for the rst time, care-

fully read through the user manual

The recharger is for indoor use

only.

7

G B

General safety instructions

for power tools

WARNING! Read all safety

directions and instructions.

Omissions in the compliance with

safety directions and instructions

can cause electrical shock, re

and/or severe injuries.

Retain all safety directions and in-

structions for future use.

The term “Power Tools” used in the safety

instructions refers to mains-operated power

tools (with power cord) and to battery-oper-

ated power tools (without power cord).

1) WORK AREA SAFETY

a) Keep work area clean and well

lit. Cluttered or dark areas invite acci-

dents.

b) Do not operate power tools in

explosive atmospheres, such as

in the presence of ammable

Iiquids, gases or dust. Power tools

create sparks which may ignite the dust

or fumes.

c) Keep children and bystanders

away while operating a power

tool. Distractions can cause you to lose

control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the

outlet. Never modify the plug in

any way. Do not use any adapter

plugs with earthed (grounded)

power tools. Unmodied plugs and

matching outlets will reduce risk of electric

shock.

130°C

Miniature fuse

Protection class II

Electrical appliances must not be dis-

posed of with the domestic waste.

Green LED lights ashes without battery

Charger ready

Green LED lights up

Battery such alleged charged

Red LED lights up Battery charging

Green LED ashes with battery

Battery has to be charged in advance for

30 minutes before charging starts

Red and green LED ashes

Battery defect

Red and green LED lights up

Battery too cold or too warm.

Battery can not be charged

Symbols in the manual

Warning symbols with in-

formation on damage and

injury prevention.

Instruction symbols (the instruction is

explained at the place of the excla-

mation mark) with information on

preventing damage.

Help symbols with information on

improving tool handling.

T2A

8

G B

b) Avoid body contact with earthed

or grounded surfaces, such as

pipes, radiators, ranges and re-

frigerators. There is an increased risk

of electric shock if your body is earthed

or grounded.

c) Do not expose power tools to rain

or wet conditions. Water entering a

power tool will increase the risk of electric

shock.

d) Do not abuse the cord. Never use

the cord for carrying, pulling or

unplugging the power tool. Keep

cord away from heat, oil, sharp

edges or moving parts. Damaged

or entangled cords increase the risk of

electric shock.

e) When operating a power tool

outdoors, use an extension cord

suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the

risk of electric shock.

f)

If operating a power tool in a

damp location is unavoidable,

use a residual current device

(RCD) protected supply. Use of an

RCD reduces the risk of electric shock.

3) PERSONAL SAFETY

a) Stay alert, watch what you are

doing and use common sense

when operating a power tool. Do

not use a power tool while you

are tired or under the inuence

of drugs, alcohol or medication.

A moment of inattention white operating

power tools may result in serious personal

injury.

b) Use personal protective equip-

ment. Always wear eye protec-

tion. Protective equipment such as dust

mask, non-slip safety shoes, hard hat, or

hearing protection used for appropriate

conditions will reduce personal injuries.

c) Prevent unintentional starting.

Ensure the switch is in the off-po-

sition before connecting to power

source and/or battery pack,

picking up or carrying the tool.

Carrying power tools with your nger on

the switch or energising power tools that

have the switch on invites accidents.

d) Remove any adjusting key or

wrench before turning the power

tool on. A wrench or a key left attached

to a rotating part of the power tool may

result in personal injury.

e) Do not overreach. Keep proper

footing and balance at all times.

This enables better control of the power

tool in unexpected situations.

f) Dress properly. Do not wear loose

clothing or jewellery. Keep your

hair, clothing and gloves away

from moving parts. Loose clothes,

jewellery or long hair can be caught in

moving parts.

g) If devices are provided for the

connection of dust extraction and

collection facilities, ensure these

are connected and properly used.

Use of dust collection can reduce dust-

related hazards.

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use

the correct power tool for your

application. The correct power tool will

do the job better and safer at the rate for

which it was designed.

b) Do not use the power tool if the

switch does not turn it on and off.

Any power tool that cannot be controlled

with the switch is dangerous and must be

repaired.

9

G B

c) Disconnect the plug from the

power source and/or the bat-

tery pack from the power tool

before making any adjust -ments,

changing accessories, or storing

power tools. Such preventive safety

measures reduce the risk of starting the

power tool accidentaIly.

d) Store idle power tools out of the

reach of children and do not al-

low persons unfamiliar with the

power tool or these instructions to

operate the power tool. Power tools

are dangerous in the hands of untrained

users.

e) Maintain power tools. Check for

misalignment or binding of mov-

ing parts, breakage of parts and

any other condition that may af-

fect the power tool’s operation. If

damaged, have the power tool repaired

before use. Many accidents are caused

by poorly maintained power tools.

f) Keep cutting tools sharp and

clean. Properly maintained cutting tools

with sharp cutting edges are less Iikely to

bind and are easier to control.

g) Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking into

account the working conditions

and the work to be performed.

Use of the power tool for operations dif-

ferent from those intended could result in

a hazardous situation.

h)

Hold the device by the insulated

gripping surfaces when perfor-

ming work in which the cutting

tool may come into contact with

hidden wiring or its own cord.

Contact with a live wire can also cause

a charge in metal parts of the device

and result in an electric shock.

5) CAREFUL HANDLING AND USE OF

BATTERY DEVICES

a) Charge the batteries only in

chargers that are recommended

by the manufacturer. Risk of re if a

charger that is suitable for a specic type

of battery is used with other batteries.

b) In the power tools, use only the

batteries designed for the pur-

pose. The use of other batteries may

result in injuries and risk of re.

c) Keep the unused battery away

from paper clips, coins, keys,

nails, screws and other small

metal objects, which could cause

bridging of the contacts. A short

circuit between the battery contacts may

cause burns or re.

d) If used incorrectly, liquid may

leak from the battery. Avoid

contact with this. In the event of

accidental contact, rinse off with

water. If the liquid gets into eyes,

seek medical assistance. Leaking

battery uid may cause skin irritations or

burns.

6) SERVICE

Have your power tool serviced by

a qualied repair person using

only identical replacement parts.

This will ensure that the safety of the

power tool is maintained.

7) SPECIAL SAFETY DIRECTIONS FOR

BATTERY-OPERATED TOOLS

a) Ensure that the device is switched

off before inserting the battery.

Inserting a battery into a power tool that

is switched on may result in accidents.

1 0

G B

b) Recharge the batteries indoors

only because the battery charger

is designed for indoor use only.

c) To reduce the electric shock haz-

ard, unplug the battery charger

from the mains before cleaning

the charger.

d) Do not subject the battery to

strong sunlight over long periods

and do not leave it on a heater.

Heat damages the battery and there is a

risk of explosion.

e) Allow a hot battery to cool before

charging.

f) Do not open up the battery and

avoid mechanical damage to the

battery. Risk of short circuit and fumes

may be emitted that irritate the respiratory

tract. Ensure fresh air and seek medical

assistance in the event of discomfort.

g) Do not use non-rechargeable bat-

teries!

8) CORRECT HANDLING OF THE BAT-

TERY CHARGER

• This device can be used by children

aged 8 and over and by people with

reduced physical, sensory or mental

capacities or with a lack of experience

or knowledge, if they are supervised or

have been instructed regarding safe use

of the device and understand the result-

ing risks. Children are not permitted to

play with the device. Cleaning and user

maintenance are not to be undertaken by

children without supervision.

• Keep the equipment away from children

and pets. Children should be supervised

in order to ensure that they do not play

with the equipment.

•

To charge the battery, use only

the charger supplied.

Risk of re and explosion. This ensures

that the safety of the device is maintained.

• Before each use, check the charg-

er, cable and plug and have them

repaired by qualied profession-

als and only with original parts.

Do not use a defective charger and do

not open it up yourself. This ensures that

the safety of the device is maintained.

•

Connect the charger only to a

socket with an earth. Ensure that

the mains voltage matches the

specications on the charger rat-

ing plate. Risk of electric shock.

•

Disconnect the charger from the

mains before closing or opening

connection to the battery / power

tool / device.

•

Keep the charger clean and away

from wet and rain. Do not use

the charger outdoors. Dirt and the

entry of water increase the risk of electric

shock.

•

Operate the charger only with

the appropriate original batteries.

Charging other batteries may result in

injuries and risk of re.

•

Avoid mechanical damage to the

charger. This can result in internal short

circuits.

• Do not operate the charger on a

combustible surface (e.g. paper,

textiles). Risk of re due to heating dur-

ing charging.

• If the power cable for this equipment is

damaged, it must be replaced by the

manufacturer, a customer service agent of

the same or a similarly qualied person in

order to prevent hazards.

• The battery of the appliance is not fully

charged at the time of delivery. It there-

fore needs to be fully recharged before

you use it for the rst time. For the rst

1 1

G B

recharge cycle we recommend that you

charge the battery for about 1 hour. Slot

the battery into the base and plug the bat-

tery charger into a mains outlet.

• When the battery is fully charged, unplug

the charger from the mains and from the

appliance. Charging time is approx. 1

hour.

• Do not charge the battery continuously

since this may damage the battery cells.

Note: Repeatedly charging small capaci-

ties may damage the battery cells. Re-

charge the battery only if the appliance is

becoming slow.

• Do not use the charger to charge non-

rechargeable batteries.

9) RESIDUAL RISKS

Even if properly operating and handling this

electric tool, some residual risks will remain.

Due to its construction and build, this electric

tool may present the following hazards:

a) Cuts

b) Ear damage if working without ear pro-

tection.

c) Damage to your health caused by swing-

ing your hands and arms when operating

the appliance for longer periods of time

or if the unit is not held or maintained

properly.

Warning! During operation, this elec-

tric tool generates an electromagnetic

eld which, under certain circum-

stances, may impair the functionality

of active or passive medical implants.

To reduce the risk of serious or lethal

injuries, we recommend that persons

with medical implants consult their

doctor and the manufacturer of their

medical implant before operating the

machine.

Charging the battery

Do not expose the battery to

extreme conditions such as

heat or impact. Risk of injury

from escaping electrolytic so-

lution! After eye/skin contact,

rinse the affected areas with

water or a neutraliser and

consult a doctor.

Charge the battery in a dry room

only.

Prior to attaching the charger, check

that the battery‘s outer surface is

clean and dry.

There is a risk of injury due to elec-

tric shock.

Only use the original charger from

the package to charge the battery.

Mind not to charge the appliance

for more than 1 hour at a time. If

you do, the battery and the appli-

ance may be damaged and longer

charging times would be a waste

of energy. Excessive charging will

void the warranty.

• Charge the battery before the rst

time of use. Do not briey charge

the battery several time in a row.

• Recharge the battery when you no-

tice that the appliance is becoming

slower.

• If a fully recharged battery lasts

for considerably shorter operating

times, the battery is used up and

needs to be replaced. Only use an

OEM spare battery available from

our Customer Service.

• Always take heed of the applicable

safety instructions as well as the en-

1 2

G B

vironmental protection regulations

and information.

• The warranty excludes all defects

caused by improper handling.

Removing / inserting the

battery

1. To remove the battery ( 10)

from the appliance, press the

release button (

11) on the bat-

tery and pull out the battery.

2. To insert the battery (

10),

place it on the guide track and

push it back into the appliance.

It will audibly snap in.

Recharging the battery

1. Remove the battery ( 10) from

the appliance.

2. Inser the battery (

10) in the

charging compartment of the bat-

tery charger (

7).

3. Plug the battery charger (

7)

into a mains outlet.

4. When the battery is fully re-

charged unplug the battery

charger (

7) from the mains.

5. Pull the battery (

10)out of the

battery charger (

7).

Green LED lights ashes without battery

Charger ready

Green LED lights up

Battery such alleged charged

Red LED lights up Battery charging

Green LED ashes with battery

Battery has to be charged in advance for

30 minutes before charging starts

Red and green LED ashes

Battery defect

Red and green LED lights up

Battery too cold or too warm.

Battery can not be charged

Used batteries

• If a fully recharged battery lasts for

considerably shorter operating times,

the battery is used up and needs to be

replaced. Only use an OEM battery

pack replacement available from our

Customer Service.

• Always take heed of the applicable

safety instructions as well as the envi-

ronmental protection regulations and

information (see “Cleaning and Main-

tenance”).

Checking the battery charge

level

The battery’s charge level ( 5) is indicat-

ed by the charge state indicator (

10).

Press the activation button battery indicator

on the battery.

The LEDs indicate the battery’s charge

level.

red-yellow-green

=Battery fully charged

red and yellow =Battery half charged

red =Battery needs to be charged

Assembling

Attaching the belt clip

Attach the belt clip (

4) either to the right

or left-hand side of the base of the device.

The belt clip (

4) ts into the recess in the

housing. Fasten the belt clip (

4) with the

screw supplied.

1 3

G B

Operation

1. Direction switch

You can toggle between right and left ro-

tation by pushing the direction of rotation

switch (

3).

If you move the direction switch (

3) to

the middle position, the device is secured

against being switched on. You can con-

tinue using the LED lamp when the switch

lock is activated. To do so, press the on/

off switch.

The direction changed may

only be performed in stand-

still mode!

2. Using the tool holder

Pull the locking sleeve ( 2) forward and

push the bit insert as far as it will go into the

tool holder (

1). Release the locking sleeve

(

2) again; the bit insert is xed in place.

Check that the bit insert is locked in the tool

holder by pulling on it.

The tool holder is not suitable

for short 25 mm bits! Use the

bit holder (

15) supplied for

short bits.

3. Switching on/off

By using the on/off switch (

12) you can

progressively control the speed. The LED

work light (

13) is automatically turned on.

The further you push the on/off switch, the

higher the speed and tightening torque.

To turn it off, release the on-off button.

When you move the direction switch (

3)

to the middle position, the device is secured

against being switched on. In this position,

the LED work light (13) can still be used.

The tightening torque depends on the se-

lected speed and impact duration.

The tightening torque actual-

ly achieved must be checked

in all cases with a torque

wrench !

Cleaning and

maintenance

Contact our Service Centre about

repairs and servicing not described

in this manual. Only use OEM

parts. Risk of injury!

Turn off the appliance and, before

doing any servicing, remove the

battery.

The following cleaning and servicing

should be done regularly. This will ensure

a long and reliable service life.

Cleaning

Do not spray the appliance

with water and do not im-

merse it in water. Electric

shock hazard!

• Keep clean the ventilation slots, motor

housing and handles of the appliance.

Use a damp cloth or a brush.

Do not use cleaning agents or solvents.

You may otherwise irreparably dam-

age the appliance.

1 4

G B

Maintenance

The appliance cleaner is maintenance

free.

Storage

• Store the trimmer in a dry place well

out of reach of children.

• In order to keep the battery well

charged, avoid exposing the appli-

ance to extreme heat or cold in stor-

age.

• Remove the battery before storing the

unit for longer periods of time.

Disposal and protection

of the environment

Remove the battery from the device and

take the device, battery, accessories and

packaging for environmentally friendly

recycling.

Machines do not belong with domes-

tic waste.

Do not dispose of batteries in

household waste, re (risk of explo-

sion) or water. Damaged batteries

may damage the environment and

your health if toxic fumes or liquids

leak out.

• Return the unit to a recycling centre.

The plastics and metals in the unit can

be sorted and appropriately recycled.

Ask our Service Centre for details.

• Dispose of batteries in discharged condi-

tion. We recommend covering the pole

with adhesive tape to prevent a short

circuit. Do not open up the battery.

• Dispose of batteries in accordance with

the local regulations. Take batteries to

an old battery collection point where

they will be recycled in an environ-

mentally friendly manner. For informa-

tion about this, ask your local waste

management company or our service

centre.

• Defective units returned to us will be

disposed of for free.

Guarantee

Dear Customer,

This equipment is provided with a 3-year

guarantee from the date of purchase.

In case of defects, you have statutory rights

against the seller of the product. These

statutory rights are not restricted by our

guarantee presented below.

Terms of Guarantee

The term of the guarantee begins on the

date of purchase. Please retain the original

receipt. This document is required as proof

of purchase.

If a material or manufacturing defect

occurs within three years of the date of

purchase of this product, we will repair or

replace – at our choice – the product for

you free of charge. This guarantee requires

the defective equipment and proof of pur-

chase to be presented within the three-year

period with a brief written description of

what constitutes the defect and when it oc-

curred.

If the defect is covered by our guarantee,

you will receive either the repaired product

or a new product. No new guarantee pe-

riod begins on repair or replacement of the

product.

1 5

G B

Guarantee Period and Statutory

Claims for Defects

The guarantee period is not extended by

the guarantee service. This also applies for

replaced or repaired parts. Any damages

and defects already present at the time of

purchase must be reported immediately af-

ter unpacking. Repairs arising after expiry

of the guarantee period are chargeable.

Guarantee Cover

The equipment has been carefully pro-

duced in accordance with strict quality

guidelines and conscientiously checked

prior to delivery.

The guarantee applies for all material and

manufacturing defects. This guarantee

does not extend to cover product parts that

are subject to normal wear and may there-

fore be considered as wearing parts (e.g.

lters or attachments) or to cover damage

to breakable parts (e.g. switches, batteries,

or parts made of glass).

This guarantee shall be invalid if the prod-

uct has been damaged, used incorrectly or

not maintained. Precise adherence to all of

the instructions specied in the operating

manual is required for proper use of the

product. Intended uses and actions against

which the operating manual advises or

warns must be categorically avoided.

The product is designed only for private

and not commercial use. The guarantee

will be invalidated in case of misuse or

improper handling, use of force, or inter-

ventions not undertaken by our authorised

service branch.

Processing in Case of Guarantee

To ensure efcient handling of your query,

please follow the directions below:

• Please have the receipt and item num-

ber (IAN 273480) ready as proof of

purchase for all enquiries.

• Please nd the item number on the rat-

ing plate.

• Should functional errors or other de-

fects occur, please initially contact the

service department specied below by

telephone or by e-mail. You will then

receive further information on the pro-

cessing of your complaint.

• After consultation with our customer

service, a product recorded as defective

can be sent postage paid to the service

address communicated to you, with the

proof of purchase (receipt) and speci-

cation of what constitutes the defect

and when it occurred. In order to avoid

acceptance problems and additional

costs, please be sure to use only the ad-

dress communicated to you. Ensure that

the consignment is not sent carriage

forward or by bulky goods, express or

other special freight. Please send the

equipment inc. all accessories supplied

at the time of purchase and ensure ad-

equate, safe transport packaging.

Repair Service

For a charge, repairs not covered by

the guarantee can be carried out by

our service branch, which will be happy to

issue a cost estimate for you.

We can handle only equipment that has

been sent with adequate packaging and

postage.

Attention: Please send your equipment to

our service branch in clean condition and

with an indication of the defect.

1 6

G B

Equipment sent carriage forward or by

bulky goods, express or other special

freight will not be accepted.

We will dispose of your defective devices

free of charge when you send them to us.

Service-Center

Service Great Britain

Tel.: 0871 5000 720

(£ 0.10/Min.)

E-Mail: [email protected].uk

IAN 273480

Importer

Please note that the following address is

not a service address. Please initially con-

tact the service centre specied above.

Grizzly Tools GmbH & Co. KG

Stockstädter Straße 20

63762 Großostheim

Germany

www.grizzly-service.eu

G B

Replacement parts/accessories

Spare parts and accessories can be obtained at

www.grizzly-service.eu

If you do not have internet access, please contact the Service Centre via telephone (see

“Sercice-Center”). Please have the order number mentioned below ready.

Pos. Description .............................................................Order No.

4 Belt clip .............................................................................91104110

7 Charger ............................................................................80001082

10 Battery 18V / 1,5 Ah .........................................................80001161

14 Adapter for 1/4“ square ......................................................91104111

15 Bit holder ..........................................................................91104112

Battery 18V / 2,6 Ah .........................................................80001162

Charger 18V / 2,6 Ah .......................................................80001086

We recommend using the battery only with the battery charger supplied.

1 7

R O

Cuprins

Introducere ................................17

Domeniul de aplicare ....................17

Descriere generală .....................18

Inventar de livrare .......................... 18

Privire de ansamblu ........................ 18

Descrierea modului de funcţionare ... 18

Date tehnice ...............................18

Instrucţiuni de siguranţă.............19

Simboluri ...................................... 19

Simboluri înscrise pe aparat ............ 19

Ilustrație pe baterie ......................... 19

Simboluri înscrise pe încărcător ........ 19

Instrucţiuni generale de siguranţă

pentru utilajele electrice .................. 20

Procedura de încărcare ................25

Demontarea/

montarea bateriei ............................ 25

Încărcarea bateriei .......................... 26

Baterii uzate .................................. 26

Vericarea nivelului de încărcare a

bateriei ......................................... 26

Montarea ................................... 26

Fixarea clemei ................................ 26

Operarea ...................................26

1. Comutator al sensului de rotaţie .... 26

2. Utilizarea portsculei ................... 27

3. Pornirea/oprirea ......................... 27

Curăţire/Mentenanţă ..................27

Curăţire ........................................ 27

Mentenanţă ................................... 27

Depozitare .................................27

Reciclare/Protecţia mediului

înconjurător ............................... 28

Garanţie .....................................28

Reparaţii-Service ........................ 29

Piese de schimb/Accesorii .......... 30

Service-Center ............................30

Importator ..................................30

Traducerea Declaraţiei Originale

de Conformitate CE ....................78

Introducere

Felicitări pentru achiziţia noului Dvs.

aparat. Aţi luat o decizie înţeleaptă şi

aţi achiziţionat un produs valoros. Acest

aparat a fost vericat din punct de vede-

re calitativ în timpul producţiei şi a fost

supus unui control nal. Astfel, capaci-

tatea funcţională a aparatului Dvs. a fost

garantată.

Manualul de operare este parte integrantă

a acestui produs. Acesta include

instrucţiuni importante despre siguranţă,

utilizare şi eliminare. Înainte de a începe

să folosiţi aparatul, familiarizaţi-vă cu toate

instrucţiunile privind operarea şi siguranţa.

Folosiţi aparatul doarîn conformitate cu

manualul deoperare şi doar în scopurile re-

comandate. Menţineţi manualul în condiţii

corespunzătoare şi, odată cu transmiterea

instalaţiei către terţi, predaţi şi toată

documentaţia aferentă.

Domeniul de aplicare

Aparatul este destinat pentru înşurubarea şi

desfacerea şuruburilor și a piulițelor. Orice

altă utilizare, care nu este menţionată

în acest ghid, poate duce la deteriorarea

aparatului, aceasta generând un risc mărit

pentru utilizator. Aparatul trebuie utilizat

doar de persoane adulte. Tinerii cu vârste

de peste 16 ani pot utiliza aparatul doar

sub supraveghere. Fabricantul nu este

responsabil pentru daunele cauzate de utili-

zarea necorespunzătoare sau de operarea

incorectă a aparatului. Acest aparat nu

este destinat pentru uzul industrial. În cazul

utilizării în scop industrial, dreptul la garanţie

este anulat.

1 8

R O

Descriere generală

Inventar de livrare

Despachetaţi aparatul şi vericaţi conţinutul.

Reciclaţi în mod corespunzător ambalajul.

- Mașină de înșurubat rotativă cu percuție

cu baterie

- Clemă cu șurub

- Încărcător

- Acumulator

- Port-vârf

- Adaptor la 1/4“ secțiune pătrată

- Instrucțiuni de utilizare originale

Imaginile pot  vizualizate

pe partea rabatabilă.

Privire de ansamblu

1 Portsculă

2 Manșon de blocare

3 Comutator al sensului de rotaţie

4 Clemă

5 Aşaj stare încărcare

6 Ștecher încărcător

7 Încărcător

8 LED verde

9 LED roşu

10 Acumulator

11 Tastă de deblocare acumulator

12 Buton de pornire/oprire

13 Lampă LED de lucru

14 Adaptor la 1/4“ secțiune pătrată

15 Port-vârf

Descrierea modului de

funcţionare

Mașina de înșurubat rotativă cu percuție

cu baterie are sens de rotație spre dreap-

ta/stânga, portsculă cu secțiune interioară

pătrată de 1/4“ și o lampă LED de lucru.

Cu ajutorul funcției de percurție rotativă

se transformă puterea motorului în percuții

rotative. Mecanismul de percuție se

activează la înșurubare și deșurubare.

Bateria furnizată poate  folosită de ase-

menea la ferăstrăul tip sabie cu baterie

PSSA 18 A1 și la mașina de șlefuit muchii

PWSA 18 A1.

Date tehnice

Aparat

Tensiune motor .........................18 V

Turaţie de mers în gol ........0-2800 min

-1

Frecvență nominală bătăi...0-3600 min

-1

Cuplu max. înșurubare dură conform

ISO 5393 .............................. 180 Nm

Portsculă ......................................1/4“

Greutate (incl. toate accesoriile) ... 1,54 kg

Nivelul de presiune acustică

(L

pA

) ............. 68,72 dB (A), K

pA

= 3 dB

Nivelul de intensitate acustică (L

WA

)

garantat ........................... 83 dB (A)

măsurat ..........79,72 dB (A); K

WA

= 3 dB

Vibraţie (a

h

) ....2,455 m/s²; K = 1,5 m/s²

Bloc acumulator (Li-Ion)

PAP18-1,5A1

Număr de celule ale bateriei

.............. 5

Tensiune nominală ....................18 V

Capacitate ............................... 1,5 Ah

Timp de încărcare .....................ca. 1 h

Încărcător .................. JLH-H15O-18

Putere consumată nominală ..........40 W

Tensiune de intrare/Input

....................... 100-240 V~, 50-60 Hz

Tensiune de ieşire/Output

...............................18 V

1500 mA

Clasă de izolare ...........................

II

Tip de izolare .............................. IPX0

1 9

R O

În cadrul dezvoltării ulterioare pot 

efectuate modicări tehnice și optice fără

anunț prealabil. De aceea toate dimensiu-

nile, indicațiile și datele sunt doar orienta-

tive. Din acest motiv nu pot  exercitate ni-

ciun fel de drepturi bazate pe instrucțiunile

de utilizare.

Valoarea dată a emisiilor de vibraţie este

măsurată prin intermediul unui proces nor-

mat de testare şi poate  folosită pentrua

efectua comparaţii între diverse utilajeelec-

trice. Valoarea dată a emisiilor de vibraţie

poatre folosită şi pentru o evaluare

iniţială a gradului de expunere.

Avertizare:

În timpul utilizării efective a utila-

jului electric, valoarea emisiilorde

vibraţie poate  diferită ceastabilită

iniţial, în funcţie de tipul utilajului

şi de modul în care acesta este

folosit.Apare necesitatea luării

unor măsuri de siguranţă pentru

protecţia operatorului, bazate pe

o estimare a gradului de expu-

nere din timpul utilizării efective

a utilajului (aici trebuie luate în

calcul toate aspectele procesuluide

operare, cum ar  timpii încare

utilajul electric a fost deconectat,şi

timpii în care a fost conectat dar a

funcţionat fără sarcină).

Instrucţiuni de siguranţă

Atenţie! Atunci când maşina este în

funcţiune, trebuie respectate următoarele

instrucţiuni de siguranţă.

Simboluri

Simboluri înscrise pe aparat

Citiţi manualul de operare!

Atenţie! Suprafață erbinte.

Există pericol de arsuri.

Dispozitivele electrice nu trebuie

aruncate în deşeurile casnice.

Ilustrație pe baterie:

Nu aruncați bateria la

gunoiul menajer, în

foc sau în apă.

Nu expuneți bateria la lumina solară

un timp îndelungat și nu o puneți pe

radiatoare (max. 45°C).

Predați bateriile la un punct de co-

lectare a bateriilor uzate, care le va

elimina corespunzător.

Simboluri înscrise pe încărcător

Atenţie!

Citiţi manualul de operare!

Încărcătorul este prevăzut pentru a

 utilizat doar în interior.

130°C

Siguranța aparatului

Clasă de izolare II

Dispozitivele electrice nu trebuie

aruncate în deşeurile casnice.

T2A

2 0

R O

prevederilor ghidului poate cauza

producerea de şoc electric, incendiu

şi/sau leziuni grave.

Toate instrucţiunile de siguranţă şi

ghidurile trebuie menţinute în bună

stare, pentru a putea  oricând ac-

cesate.

Termenul ,,Utilaj electric”, folosit în

instrucţiunile de siguranţă, se referă la uti-

lajele alimentate de la reţea (cu cablul de

reţea) şi la utilajele alimentate prin acumula-

tor (fără cablu de reţea).

1) SIGURANŢA LA LOCUL DE

MUNCĂ:

• Menţineţi curăţenia şi o bună

iluminare a locului de muncă.

Dezordinea sau locurile neiluminate pot

cauza accidente de muncă.

• Nu operaţi utilajul electric în

zone cu risc de explozie, în care

se aă uide, gaze sau prafuri

inamabile. Utilajele electrice produc

scântei, care pot aprinde praful sau

aburii.

• Menţineţi la distanţă copiii

şi orice alte persoane atunci

cândlucraţi cu utilajul electric. În

cazul devierilor, puteţi pierde controlul

asupra utilajului.

2) SIGURANŢĂ ELECTRICĂ:

• Ştecherul utilajului electric trebu-

ie introdus în priză. Ştecherul nu

trebuie modicat sub nicioformă.

Nu folosiţi şe adaptoare

împreună cu utilajele electrice cu

împământare. Ştecherele nemodi-

cate şi prizele adecvate diminuează

riscul de şoc electric.

LED verde pâlpâie fără baterie

baterie în stare de funcționare

LED-ul verde este aprins

bateria este încărcată

LED-ul roşu este aprins - bateria se încarcă

LED verde pâlpâie cu baterie

bateriile trebuie preîncărcate timp de 30

min. înainte de începerea procesului de

încărcare

LED roșu și verde pâlpâie -

baterie defectă

LED roșu și verde aprinse

bateria prea rece sau prea caldă Nu se

poate încărca bateria

Simboluri folosite

Indicatoare de pericol (în

locul semnului exclamării

poate  ilustrat pericolul) cu

date referitoare la prevenirea

daunelor personale sau ma-

teriale.

Semnale de interdicţie (în locul sem-

nului de exclamare care exprimă

obligativitatea) cu date referitoare

la prevenirea daunelor materiale.

Indicatoare cu date despre ope-

rarea facilă a aparatului.

Instrucţiuni generale de

siguranţă pentru utilajele

electrice

AVERTIZARE! Citiţi toate

instrucţiunile de siguranţă

şi ghidurile. Nerespectarea

instrucţiunilor de siguranţă şi a

Pagina se încarcă ...

Parkside PDSSA 18 A1 Original Instructions Manual

Parkside PDSSA 18 A1 Original Instructions Manual

în alte limbi

Lucrări conexe

Alte documente