Tesla TT34EX81-1232IAW Manual de utilizare

SPLIT-TYPE

AIR CONDITIONER

USER MANUAL

For R32 DC Inverter models:

TT26EX21-0932IA

TT26EX81-0932IAW

TT34EX21-1232IA

TT34EX81-1232IAW

TT34EXC1-1232IAWPC

TT51EX21-1832IA

TT51EX81-1832IAW

TT68EX21-2432IA

Ver. 2021

HU MKD

BIH/

MNE

RO SLO SRBENG BG GR HR

OPERATING INSTRUCTION

Note: All the pictures in this manual are just schematic diagrams, the actual is the standard. Please read

this owner’s manual carefully and thoroughly before operating the unit! Take care of this manual for future

reference.

UPUTE ZA UPOTREBU

Napomena: Sve slike u ovom priručniku su samo shematski dijagrami, ﬁzički proizvod je standard. Molimo

Vas da pažljivo i temeljito pročitate ovo uputstvo za upotrebu prije korištenja uređaja! Čuvajte ovaj priručnik

za buduće korištenje.

FELHASZNÁLÓI KÉZIKÖNYV

Megjegyzés: A kézikönyvben található képek csak sematikus ábrák, az aktuális a szabvány. Kérjük, ﬁgyelmesen

olvassa el ezt a kézikönyvet mielőtt működtetné az eszközt! Őrizze meg ezt a kézikönyvet a későbbiekre is.

ΕΓΧΕΙΡΙΔΙΟ ΧΡΉΣΉΣ

Σημείωση: Οι εικόνες στο παρόν εγχειρίδιο είναι σχεδιαγράμματα, ανατρέξτε στο πραγματικό προϊόν. Διαβάστε

προσεκτικά τις προφυλάξεις στο παρόν εγχειρίδιο προτού θέσετε τη μονάδα σε λειτουργία! Φυλάξτε το παρόν

εγχειρίδιο για μελλοντική χρήση.

ИНСТРУКЦИЯ ЗА УПОТРЕБА

Забележка: Всички снимки в тази инструкция са само схематични диаграми, действителните са

стандартните. Моля, прочетете внимателно тази инструкция за употреба преди да започнете работа с

уреда! Запазете тази инструкция за бъдещи справки

PRIROČNIK ZA UPORABO

Opomba: Vse slike v tem priročniku so le shematske risbe, dejansko stanje je standard. Prosimo, da pred

uporabo skrbno in temeljito preberete ta priročnik za uporabo! Priročnik shranite za kasnejšo uporabo.

MANUAL DE UTILIZARE

Nota: Fotograﬁile din acest manual sunt doar diagrame schematice. Vă rugăm să citiți “Manualul de Utilizare”

cu atenție, înainte de a utiliza aerul condiționat, pentru a asigura funcționarea corespunzătoare. Păstrați

manualul pentru referințe ulterioare.

ENG

HR

HU

GR

BG

UPUTSTVO ZA UPOTREBU

Napomena: Sve slike u ovom priručniku su samo šematski dijagrami, ﬁzički proizvod je standard. Molimo Vas

da pažljivo i temeljno pročitate ovo uputstvo za upotrebu prije korišćenja uređaja! Sačuvajte ovo uputstvo za

buduću upotrebu.

BIH/

MNE

SLO

RO

УПАТСТВО ЗА УПОТРЕБА

Напомена: Сите слики во овој прирачник се само шематски дијаграми, физичкиот производ е

стандард. Ве молиме внимателно и теменлно да го причитате ова упатство за употреба пред

користење на уредот! Сочувајте го ова упатство за идна употреба.

MKD

UPUTSTVO ZA UPOTREBU

Napomena: Sve slike u ovom priručniku su samo šematski dijagrami, ﬁzički proizvod je standard. Molimo

Vas da pažljivo i temeljno pročitate ovo uputstvo za upotrebu pre korišćenja uređaja! Sačuvajte ovo

uputstvo za buduću upotrebu.

SRB

3

ENG

• Read this guide before installing and using the appliance.

• During the installation of the indoor and outdoor units the access to the working area should be forbidden to

children. Unforeseeable accidents could happen.

• Make sure that the base of the outdoor unit is ﬁrmly ﬁxed.

• Check that air cannot enter the refrigerant system and check for refrigerant leaks when moving the air

conditioner.

• Carry out a test cycle after installing the air conditioner and record the operating data.

• The ratings of the fuse installed in the built in control unit are 4A / 250V .

• Protect the indoor unit with a fuse of suitable capacity for the maximum input current or with another overload

protection device.

• Ensure that the mains voltage corresponds to that stamped on the rating plate. Keep the switch or power plug

clean. Insert the power plug correctly and ﬁrmly into the socket, thereby avoiding the risk of electric shock or

ﬁre due to insufﬁcient contact.

• Check that the socket is suitable for the plug , otherwise have the socket changed.

• The appliance must be ﬁtted with means for disconnection from the supply mains having a contact separation

in all poles that provide full disconnection under overvoltage category III conditions, and these means must be

incorporated in the ﬁxed wiring in accordance with the wiring rules.

• The air conditioner must be installed by professional or qualiﬁed persons.

• Do not install the appliance at a distance of less than 50 cm from inﬂammable substances (alcohol, etc.) or from

pressurised containers (e.g. spray cans).

• If the appliance is used in areas without the possibility of ventilation, precautions must be taken to prevent any

leaks of refrigerant gas from remaining in the environment and creating a danger of ﬁre

• The packaging materials are recyclable and should be disposed of in the separate waste bins .Take the air

conditioner at the end of its useful life to a special waste collection centre for disposal.

• Only use the air conditioner as instructed in this booklet. These instructions are not intended to cover every

possible condition and situation . As with any electrical household appliance , common sense and caution are

therefore always recommended for installation, operation and maintenance.

• The appliance must be installed in accordance with applicable national regulations.

• Before accessing the terminals , all the power circuits must be disconnected from the power supply.

• The appliance shall be installed in accordance with national wiring regulations.

• This appliance can be used by children aaged from 8 years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall

not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• Do not try to install the conditioner alone; always contact specialized technical personnel.

• Cleaning and maintenance must be carried out by specialized technical personnel. In any case disconnect the

appliance from the mains electricity supply before carrying out any cleaning or maintenance.

• Ensure that the mains voltage corresponds to that stamped on the rating plate. Keep the switch or power plug

clean. Insert the power plug correctly and ﬁrmly into the socket , thereby avoiding the risk of electric shock or

ﬁre due to insufﬁcient contact.

• Do not pull out the plug to switch off the appliance when it is in operation, since this could create a spark and

cause a ﬁre, etc.

• This appliance has been made for air conditioning domestic environments and must not be used for any other

purpose , such as for drying clothes, cooling food, etc.

• The packaging materials are recyclable and should be disposed of in the separate waste bins . Take the air

conditioner at the end of its useful life to a special waste collection center for disposal.

SAFETY RULES AND RECOMMENDATIONS

FOR THE INSTALLER

SAFETY RULES AND RECOMMENDATIONS

FOR THE USER

4

ENG

• Always use the appliance with the air ﬁlter mounted . The use of the conditioner without air ﬁlter could cause an

excessive accumulation of dust or waste on the inner parts of the device with possible subsequent failures.

• The user is responsible for having the appliance installed by a qualiﬁed technician , who must check that it is

earthed in accordance with current legislation and insert a thermomagnetic circuit breaker.

• The batteries in remote controller must be recycled or disposed of properly. Disposal of Scrap Batteries ---

Please discard the batteries as sorted municipal waste at the accessible collection point.

• Never remain directly exposed to the ﬂow of cold air for a long time. The direct and prolonged exposition

to cold air could be dangerous for your health .Particular care should be taken in the rooms where there are

children , old or sick people.

• If the appliance gives off smoke or there is a smell of burning, immediately cut off the pow er supply and contact

the Service Centre.

• The prolonged use of the device in such conditions could cause ﬁre or electrocution.

• Have repairs carried out only by an authorised Service Centre of the manufacturer . Incorrect repair could

expose the user to the risk of electric shock, etc.

• Unhook the automatic switch if you foresee not to use the device for a long time. The airﬂow direction must be

properly adjusted.

• The ﬂaps must be directed downwards in the heating mode and upwards in the cooling mode.

• Only use the air conditioner as instructed in this booklet. These instructions are not intended to cover every

possible condition and situation. As with any electrical household appliance, common sense and caution are

therefore always recommended for installation , operation and maintenance.

• Ensure that the appliance is disconnected from the power supply when it will remain inoperative for a long

period and before carrying out any cleaning or maintenance.

• Selecting the most suitable temperature can prevent damage to the appliance.

• Do not bend, tug or compress the power cord since this could damage it. Electrical shocks or ﬁre are probably

due to a damaged power cord. Specialized technical personnel only must replace a damaged power cord.

• Do not use extensions or gang modules.

• Do not touch the appliance when barefoot or parts of the body are wet or damp.

• Do not obstruct the air inlet or outlet of the indoor or the outdoor unit. The obstruction of these openings

causes a reduction in the operative efﬁciency of the conditioner with possible consequent failures or damages.

• In no way alter the characteristics of the appliance.

• Do not install the appliance in environments where the air could contain gas , oil or sulphur or near sources of

heat.

• This appliance is not intended for use by persons (including children ) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

• Do not climb onto or place any heavy or hot objects on top of the appliance.

• Do not leave windows or doors open for long when the air conditioner is operating.

• Do not direct the airﬂow onto plants or animals.

• A long direct exposition to the ﬂow of cold air of the conditioner could have negative effects on plants and

animals.

• Do not put the conditioner in contact with water. The electrical insulation could be damaged and thus causing

electrocution.

• Do not climb onto or place any objects on the outdoor unit

• Never insert a stick or similar object into the appliance. It could cause injury.

• Children should be supervised to ensure that they do not play with the appliance. If the supply cord is damaged,

it must be replaced by the manufacturer,its service agent or similarly qualiﬁed persons in order to avoid a

hazard.

SAFETY RULES AND PROHIBITIONS

5

ENG

NAMES OF PARTS

Indoor unit

Outdoor unit

Note: The above or the next pages mentioned ﬁgures are only intended to be a simple diagram of the appliance

and may not correspond to the appearance of the units that have been purchased.

No. Description

1 Front panel

2 Air ﬁlter

3 Optional ﬁlter (if installed)

4 LED Display

5 Signal receiver

6 Terminal block cover

7 Ionizer generator(if installed)

8 Deﬂectors

9 Emergency button

10

Indoor unit rating label (Stick

position optional)

11 Airﬂow direction louver

12 Remote controller

No. Description

13 Air outlet grille

14 Outdoor unit rating label

15 Terminal block cover

16 Gas valve

17 Liquid valve

6

ENG

INDOOR UNIT DISPLAY

EMERGENCY & AUTO-RESTART FUNCTION

Emergency function

Auto-restart function

No. Led Function

1 SLEEP

SLEEP mode

2

Temperature display (if present) /

Error code

1. Lights up during Timer operation when the air

conditioner is operational

2. Displays the malfunction code when fault occurs.

3 TIMER

Lights up during Timer operation.

The shape and position of switches and indicators may be different according to the model, but their function

is the same.

The shape and position of the emergency button may be different according to the model, but their function

is the same.

If the remote controller fails to work or maintenance

necessary, proceed as following:

• Open and lift the front panel up to an angle to reach

the emergency button.

• For heating model, press the emergency button

at ﬁrst time, the unit will operate in COOL mode.

Press at second time within 3 seconds, the unit will

operate in HEATmode. Press at third time after 5

seconds, the unit will turn off.

• For cooling only model, press the emergency

button at ﬁrst time, the unit will operate in COOL

mode. Press again, the unit will turn off.

The appliance is preset with an auto-restart function. In case of a sudden power failure, the module will memorizes

the setting conditions before the power failure. When the power restores, the unit will restart automatically with the

previous settings preserved by the memory function.

front panel

Emergency button

The emergency button is located on E-box cover

of the unit under the front panel.

7

ENG

REMOTE CONTROLLER

No. Button Function

1

To turn on or off the air conditioner .

2 OPTION To activate or deactivate optional function (Check below table).

3

To decrease temperature, time setting or choose the function.

4

To increase temperature , time setting or choose the function.

5 ECO

To activate / deactivate the ECO function which enables the unit automatically to sets the

operation to achieve energy savings.

6 TURBO

Press this button to activate/deactivate the Superfunction which enables the unit to reach

the preset temperature in the shortest time.

7 MODE To select the mode of operation (AUTO COOL DRY FAN HEAT)

8 FAN

To select the fan speed of auto/mute/low/mid/mid/high/high/turbo , cycle as below

Flashing

9

1. If press time interval is over 2 seconds, to activate the swing of vertical ﬂap(left/right)

or deactivate it.

2. If press time interval is in 2 seconds, the swing angle range of vertical ﬂap will cycle as

below.

deactivate

10

1. If press time interval is over 2 seconds, to activate the swing of horizontal

deﬂectors(left/right) or deactivate it.

2. If press time interval is in 2 seconds, the swing angle range of horizontal

deﬂectors(left/right) will cycle as below.

deactivate

Flashing

ON/OFF Mode OPTIONS

ON

AUTO TIMER DISPLAY HEALTH I FEEL

COOL

TIMER DISPLAY HEALTH SLEEP MILDEW I FEEL

DRY TIMER DISPLAY HEALTH MILDEW I FEEL

FAN TIMER DISPLAY HEALTH I FEEL

HEAT

TIMER DISPLAY HEALTH SLEEP I FEEL 8°C H

OFF

AUTO CLEAN TIMER DISPLAY HEALTH I FELL

COOL

CLEAN TIMER DISPLAY HEALTH SLEEP MILDEW I FEEL

DRY CLEAN TIMER DISPLAY HEALTH MILDEW I FEEL

FAN CLEAN TIMER DISPLAY HEALTH I FEEL

HEAT

CLEAN TIMER DISPLAY HEALTH SLEEP I FEEL 8°C H

8

ENG

Meaning of symbols on the liquid crystal display

Optional Function: COMFORTABLE COOLING

airﬂow

HEALTH Optional Function: generate the ionizer

Optional Function: COMFORTABLE HEATING

airﬂow

button: SWING LEFT/RIGHT

Hold and together over 3 seconds

to activate of deactivate the Lock function

You will hear a beep when you press the following buttons or select the following optional functions, though

the actual model haven’t this function, we express our apologies:

No. Symbols Meaning

1

Single indicator

2

Lock function indicator

3

Battery indicator

4 AUTO Mode Auto function indicator

5 COOL Mode Cooling indicator

6 DRY Mode Dry indicator

7 FAN Mode Fan indicator

8 HEAT Mode Heating indicator

9 ECO ECO function indicator

9

ENG

The following angle can not be selected for current models, we express our apologies.

Use 2 LRO 3 AAA (1.5V) batteries . Do not use rechargeable batteries . Replace the old batteries with new

ones of the same type when the display is no longer legible. Do not dispose batteries as unsorted municipal

waste. Collection of such waste separately for special treatment is necessary.

Replacement of Batteries

Remove the battery cover plate from the rear of the remote controller, by sliding it in the direction of the arrow.

Install the batteries according the direction (+and -) shown on the Remote Controller. Reinstall the battery cover by

sliding it into place.

No. Symbols Meaning

10

TIMER

Timer indicator

11

Temperature indicator

12

Flashing

Fan speed indicator: Auto low low mid mid high

13

Mute indicator

14

SUPER indicator

15

Flap swing angle indicator

16

Flashing

Deﬂector swing angle indicator

17

Comfortable cooling airﬂow indicator

18

Comfortable heating airﬂow indicator

19

Optional functions indicator

Notes: There is no HEALTH/WIND FREE/

GEN MODE functions for current models, we

express our apologies.

Flashing

Note:

Child-lock:

Press

and together to activate

Display ON/OFF:

Long press ECO button

Please remove batteries to avoid leakage damage

when not using for a long time.

10

ENG

WARNING!

1. Direct the remote controller toward the Air conditioner.

2. Check that there are no objects between the remote control

and the Signal receptor in the indoor unit.

3. Never leave the remote controller exposed to the rays of the

sun.

4. Keep the remote controller at a distance of at least 1m from

the television or other electrical appliances.

• This adjustment must be done while the appliance is

switched off.

• Never position ”Flaps” manually, the delicate mechanism

might seriously damaged!

• Never poke ﬁngers, sticks or other objects in the air inlet or

outlet vents. Such accidental contact with live pants might

cause unforeseeable damage or hurt.

• The following angle can not be selected for current models,

we express our apologies.

ﬂashing

Signal receptor

OPERATING INSTRUCTIONS

“Swing” control of the air ﬂow

The air sucked by the fan enters from the grill and passes

through the ﬁlter, then it is cooled/dehumidiﬁed or heated

through the heat exchanger.

The direction of the air outlet is motorized up and down by

ﬂaps, and manually moved right and left by the vertical

deﬂectors, for some models, the vertical deﬂectors could be

controlled by motor as well.

1. Press the button

to activate the FLAP ,

1. If press time interval is in 2 seconds, the swing will cycle as below

deactivate

2. If press time interval is over 2 seconds, it will be deactivate the air ﬂow

is directed alternatively from up to down .In order to guarantee an even

diffusion of the air in the room.

2. Press the button

to activates the motorized deﬂectors

1. If press time interval is in 2 seconds the swing will cycle as below

deactivate

ﬂashing

2. If press time interval is over 2 seconds, it will be deactivate the air ﬂow

is directed alternatively from left to right. (Optional function, depends

on the models).

The deﬂectors are positioned manually and placed under the ﬂaps.

They allow to direct the air ﬂow rightward or leftward.

Filter

Heat

Exchanger

Fan

“ﬂaps”

“ﬂap”

movement

Deﬂectors

WARNING!

11

ENG

Cooling mode

Heating mode

Dry mode

Fan mode (not FAN button)

Auto mode

To activate the cooling function (COOL) , press the MODE button until

the symbol COOL appears on the display.

The cooling function is activated by setting the button

or at a

temperature lower than that of the room.

To optimize the function of the Air conditioner, adjust the temperature

(1), the speed (2) and the direction of the air ﬂow (3) by pressing the

button indicated.

To activate the heating function (HEAT) , press the MODE button until the symbol HEAT appears on the display.

With the button

or set a temperature higher than that of the room.

To optimize the function of the Air conditioner adjust the temperature (1), the speed (2) and the direction of the air

ﬂow (3) by pressing the button indicated.

To set the DRY mode, Press MODE until DRY appears in the display. An automatic function of alternating cooling

cycles and air fan is activated.

To set the FAN mode, Press MODE until FAN appears on the display.

To activate the AUTO mode of operation, press the MODE button on the remote controller until the symbol

AUTO appears on the display. In AUTO mode , the air conditioner will run automatically according to the room

temperature.

In HEATING operation, the appliance can automatically activate a defrost cycle, which is

essential to clean the frost on the condenser so as to recover its heat exchange function.

This procedure usually lasts for 2-10 minutes during defrosting,indoor unit fan stop

operation. After defrosting ,it resumes to HEATING mode automatically.

WARNING!

The cooling function allows the air condit- ioner to cool

the room and at the same time reduces Air humidity.

The heating function allows the air conditi- oner to heat

the room.

This function reduces the humid- ity of the air to make the

room more comfortable.

The air conditioner works in only ventilation.

Automatic mode.

12

ENG

Display function (indoor display)

ECO function

Turbo function

Sleep function

Mildew function

Press OPTION at the ﬁst time, select the DISPLAY by pressing the

button

or until symbol DISPLAY is ﬂashing; Press OPTION again to

switch off the LED display on the panel, and

appears on the

remote controller display. Do it again to switch on the LED display.

Only in Heating or Cooling model, press ECO button and symbol

ECO will appear on the display, the air conditioner will work in energy

saving process. To cancel this function, pressing the MODE to switch

other mode or pressing the ECO button again.

To activate turbo function,pressing the button TURBO or pressing the

button FAN until symbol

appears on the display.

To cancel this function, pressing the FAN to switch other fan speed or

pressing the TURBO button again.

In AUTO/HEAT/COOL/FAN mode, When you select TURBO feature, it

will use the highest fan setting to blow strong airﬂow.

Press OPTION at the ﬁst time , select the SLEEP by pressing the button

or until symbol SLEEP is ﬂashing; Press OPTION again to activate

the SLEEP function, and SLEEP appears on the display. Do it again to

deactivate this function. After 10 hours running in sleep mode, the air

conditioner will return to the previous setting mode.

Press OPTION at the ﬁst time , select the MILDEW by pressing the button

or until symbol MILDEW is ﬂashing;

Press OPTION again to activate the MILDEW function, and

appears on the display. Do it again to

deactivate this function. This function enable the air conditioner still blow airﬂow about 15 minutes to dry the

indoor inner parts to avoid mildew, when the air conditioner is off.

Note: MILDEW function only available in DRY/COOLING mode

Switch on/off the LED display on panel

The air conditioner works in economic mode

13

ENG

Self-clean function

Timer function

8°C heating function

Press OPTION at the ﬁst time , select the CLEAN by pressing the

button

or until symbol CLEAN is ﬂashing; Press OPTION again to

activate the CLEAN function, and

appears on the display. Do it

again to deactivate this function.

For timer on, before proceeding with the time: Switch the conditioner

off (with the key

). program the working mode with the button

MODE and the fan speed with the button FAN.

Timer setting/change/cancel:

1. Press OPTION at the ﬁst time, select the Timer by pressing the

button

or until symbol TIMER is ﬂashing;

2. Press OPTION again, the data symbol like

and TIMER will

be ﬂashing;

3. To set the timer orchange the timer:

(1) Press the button

or to set the expected timer (Increase or

decrease at half-hour intervals) the symbols and TIMER both are

ﬂashing.

(2) Press OPTION or wait for 5 seconds without any operation

to conﬁrm the timer, the pre-setting timer like

and symbol

will be on the display.

To cancel the timer (if TIMER is on)

Press OPTION or wait for 5 seconds without any operation to

cancel the timer .

Note: All processing should be operated in 5 seconds, otherwise the

processing will be cancelled.

1. Press OPTION at the ﬁrst time, select the 8°C H by pressing the button

or until symbol 8°C H is ﬂashing;

Press OPTION again to activate the 8°C heating function, and

appears on the display. Do it again or

change the mode to deactivate this function.

2. This function enable the setting temperature 8°C when heating.

1. This function help carry away the accumulated dirt, bacteria, etc from the evaporator.

2. This function will run about 30 minutes, and it will return to the pre-setting mode .You can press

or MODE

to cancel this function during the process. You will hear 2 beeps when it’s ﬁnished or cancelled.

3. It’s normal if there are some noise during this function process, as plastic materials expand with heat and

contract with cold.

4. We suggest operate this function as the following ambient condition to avoid certain safety protection

features.

Indoor unit Temp<30°C

Outdoor unit 5°C <Temp<30°C

5. We suggest operate this function per 3 months.

Switch off the air conditioner.

To set the automatic switch-on /off of the air conditioner

Only can be set in Heating mode

Figure 1

Timer-on

when switch off

Figure 2

Timer-off

when switch on

14

ENG

Temperature

Mode

Cooling operating Heating operating Drying operating

Room

temperature

17°C~32°C 0°C~27°C 17°C~32°C

Outdoor

temperature

15°C~43°C for T1 Climate

-7°C~24°C

15°C~43°C for T1 Climate

15°C~52°C for T3 Climate 15°C~52°C for T3 Climate

Temperature

Mode

Cooling operating Heating operating Drying operating

Room

temperature

17°C~32°C 0°C~30°C 17°C~32°C

Outdoor

temperature

15°C~53°C

-20°C~30°C

15°C~53°C

-15°C~53°C

For models with low

temperature cooling system

-15°C~53°C

For models with low

temperature cooling system

I FEEL function

Operating Temperature

Press OPTION at the ﬁst time , select the I FEEL by pressing the button

or until symbol I FEEL is ﬂashing; Press OPTION again to activate

the I FEEL function, and I

appears on the display. Do it again to

deactivate this function.

This function enable the remote control to measure the temperature

at its current location and send this signal 7 times in 2 hours to the air

conditioner to enable the air conditioner to optimize the temperature

around you and ensure maximum comfort. It will automatically

deactivate 2 hours later , or indoor temperature exceed the range

0~50°C.

The air conditioner is programmed for comfortable and suitable living conditions as below if used outside the

conditions, certain safety protection features might come into effect.,

Fix air conditioner:

Inverter air conditioner:

• The unit does not operate immediately if it is turned on after being turned off or after changing the mode

during operation.This is a normal self-protection action,you need waiting for about 3 minutes.

• The capacity and efﬁciency are according to the test conducted at full-load operation(The highest speed of

indoor fan motor and the maximum open angle of the ﬂaps and deﬂectors are requested.)

WARNING!

15

ENG

Category

LFL

(kg/m

3

)

h

0

(m)

Charge amount (M) (kg) Minimum room area (m

2

)

4 7 10 15 20 30 50

R290 0.038

0.152kg 0.228kg 0.304kg 0.456kg 0.608kg 0.76kg 0.988kg

0.6 82 146 328 584 912 1514

1 30 53 118 210 328 555

1.8 9 16 36 65 101 171

2.2 6 11 24 43 68 115

R32 0.306

1.224kg 1.836kg 2.448kg 3.672kg 4.896kg 6.12kg 7.956kg

0.6 29 51 116 206 321 543

1 10 19 42 74 116 196

1.8 3 6 13 23 36 60

2.2 2 4 9 15 24 40

Table GG.2 - Minimum room area (m

2

)

Installation Safety Principles

1. Site Safety

2. Operation Safety

3. Installation Safety

• Open Flames Prohibited

• Ventilation Necessary

• Mind Static Electricity

• Must wear protective clothing and anti-static gloves

• Don`t use mobile phone

• Refrigerant Leak Detector

• Appropriate Installation Location

Please note that:

1. The installation site should be in a well-ventilated condition.

2. The sites for installing and maintaining an air conditioner using Refrigerant R290 should be free from open ﬁre

or welding, smoking, drying oven or any other heat source higher than 370 which easily produces open ﬁre;

the sites for installing and maintaining an air conditioner using Refrigerant R32 should be free from open ﬁre

or welding, smoking, drying oven or any other heat source higher than 548 which easily produces open ﬁre.

3. When installing an air conditioner, it is necessary to take appropriate anti-static measures such as wear anti-

static clothing and/or gloves.

4. It is necessary to choose the site convenient for installation or maintenance wherein the air inlets and outlets

of the indoor and outdoor units should be not surrounded by obstacles or close to any heat source or

combustible and/or explosive environment.

5. If the indoor unit suffers refrigerant leak during the installation, it is necessary to immediately turn off the valve

of the outdoor unit and all the personnel should go out till the refrigerant leaks completely for 15 minutes. If

the product is damaged, it is a must to carry such damaged product back to the maintenance station and it is

prohibited to weld the refrigerant pipe or conduct other operations on the user’s site.

6. It is necessary to choose the place where the inlet and outlet air of the indoor unit is even.

7. It is necessary to avoid the places where there are other electrical products, power switch plugs and sockets,

kitchen cabinet, bed, sofa and other valuables right under the lines on two sides of the indoor unit.

17

ENG

Special Tools

Indoor unit

• Install the indoor unit on a strong wall that is not

subject to vibrations.

• The inlet and outlet ports should not be

obstructed:the air should be able to blow all over

the room.

• Do not install the unit near a source of heat,

steam,or ﬂammable gas.

• Do not install the unit where it will be exposed to

direct sunlight.

• Select a site where the condensed water can be

easily drained out, and where it is easily connected

to outdoor unit.

• Check the machine operation regularly and reserve

the necessary spaces as shown in the picture.

• Select a place where the ﬁlter can be easily taken

out.

Tool Name Requirement(s) for Use

Mini Vacuum Pump

It should be an explosion-proof vacuum pump; can ensure certain precision and

its vacuum degree should be lower than 10Pa.

Filling Device

It should be a special explosion-proof ﬁlling device; have certain precision and its

ﬁlling deviation should be less than 5g.

Leak Detector It should be calibrated regularly; and its annual leak rate should not exceed 10g.

Concentration Detector

A. The maintenance site should be equipped with a ﬁxed-type combustible

refrigerant concentration detector and connected to a safeguard alarm system;

its error must be not more than 5%.

B. The installation site should be equipped with a portable combustible refrigerant

concentration detector which can realize two-level audible and visual alarm; its

error must be not more than 10%.

C. The concentration detectors should be calibrated regularly.

D. It is necessary to check and conﬁrm the functions before using the concentration

detectors.

Pressure Gauge

A. The pressure gauges should be calibrated regularly.

B. The pressure gauge used for Refrigerant 22 can be used for Refrigerants R290

and R161; the pressure gauge used for R410A can be used for Refrigerant 32.

Fire Extinguisher

It is necessary to carry ﬁre extinguisher(s) when installing and maintaining an

air conditioner. On the maintenance site, there should be two or more kinds

of dry powder, carbon dioxide and foam ﬁre extinguishers and that such ﬁre

extinguishers should be placed at stipulated positions, with eye-catching labels

and in handy places.

Selecting the Installation Place

Mounting plate

Condensed water

drain pipe

Sleeve

Insulating covering

Electrical cable

Water drain pipe

18

ENG

Outdoor unit

Installation Diagram

• Do not install the outdoor unit near sources of heat,

steam or ﬂammable gas.

• Do not install the unit in too windy or dusty

places. Do not install the unit where people often

pass.Select a place where the air discharge and

operating sound will not disturb the neighbours.

• Avoid installing the unit where it will be exposed

to direct sunlight ( other wise use a protection , if

necessary, that should not interfere with the air ﬂow).

• Reserve the spaces as shown in the picture for the

air to circulate freely.

• Install the outdoor unit in a safe and solid place.

• If the outdoor unit is subject to vibration, place

rubber gaskets onto the feet of the unit.

Before starting installation, decide on the position of

the indoor and outdoor units, taking into account the

minim- um space reserved around the units

Minimum space to be reserved (mm)

showing in the picture

Outdoor unit

Indoor unit

The purchaser must ensure that the person and/or company who is to install, maintain or repair this air

conditioner has qualiﬁcations and experience in refrigerant products.

Installation of the Indoor unit

• Do not install your air conditioner in a wet room such as

a bathroom or laundry etc

• The installation site should be 250cm or more above

the ﬂoor.

WARNING!

19

ENG

1. Make the piping hole (ɸ65) in the wall at a slight downward slant to the

outdoor side.

2. Insert the piping-hole sleeve into the hole to prevent the connection

piping and wiring from being damaged when passing through the hole.

1. Open the front panel.

2. Take off the cover as indicated in the piciure ( by

removing a screw or breaking the hooks).

3. For the electrical connections, see the circuit diagram on

the right part of the unit under the front panel.

4. Connect the cable wires to the screw terminals by

following the numbering ,Use wire size suitable to

the electric power input (see name plate on the unit)

and according to all current national safety code

requirements.

To install, proceed as follows:

Installation of the mounting plate

Drilling a hole in the wall for the piping

Electrical connections-Indoor unit

• The cable connecting the outdoor and indoor units must be

suitable for outdoor use.

• The plug must be accessible also after the appliance has been

installed so that it can be pulled out if necessary.

• An efﬁcient earth connection must be ensured.

• If the power cable is damaged, it must be replaced by an

authorised Service Centre.

Note: Optional the wires can been connected to the main PCB

of indoor unit by manufacturer according to the model without

terminal block.

The hole must slope downwards towards the exterior

Note: Keep the drain pipe down towards the direction of the wall hole,

otherwise leakage may occur

1. Always mount the rear panel horizontally and vertically

2. Drill 32 mm deep holes in the wall to ﬁx the plate;

3. Insert the plastic anchors into the hole;

4. Fix the rear panel on the wall with provided tapping screws

5. Be sure that the rear panel has been ﬁxed ﬁrmly enough to withstand the weight

Note: The shape of the mounting plate may be different from the one above, but installation method is similar .

WARNING!

Front panel

Wiring diagram

Terminal block

cover

Indoors Outdoors

20

ENG

The piping can be run in the 3 directions indicated by

numbers in the picture . When the piping is run in direction

1or 3, cut a notch along the groove on the side

of the indoor unit with a cutter.

Run the piping in the direction of the wall hole and bind

the copper pipes , the drain pipe and the power cables

together with the tape with the drain pipe at the bottom, so

that water can ﬂow freely.

• Do not remove the cap from the pipe until connecting it,

to avoid dampness or dirt from entering.

• If the pipe is bent or pulled too often , it will become stiff

. Do not bend the pipe more than three times at one

point.

• When extending the rolled pipe, straighten the pipe by

unwinding it gently as shown in the picture.

1. Remove the indoor unit pipe cap (check that

there is no debris inside).

2. Insert the fare nut and create a ﬂange at the

extreme end of the connection pipe.

3. Tighten the connections by using two

wrenches working in opposite directions.

4. For R32/R290 refrigerants, mechanical

connectors should be outdoors.

The indoor unit condensed water drainage is fundamental for

the success of the installation.

1. Place the drain hose below the piping, taking care not to

create siphons.

2. The drain hose must slant downwards to aid drainage.

3. Do not bend the drain hose or leave it protruding

or twisted and do not put the end of it in water. If an

extension is connected to the drain hose, ensure that it is

lagged when it passes into the indoor unit.

4. If the piping is installed to the right, the pipes, power

cable and drain hose must be lagged and secured onto

the rear of the unit with a pipe connection.

1. Insert the pipe connection into the relative slot.

2. Press to join the pipe connection to the base.

Refrigerant piping connection

Connections to the indoor unit

Indoor unit condensed water drainage

Shape the connection pipe

Extending the rolled pipe

YES

NO

YES

NO NO

Torque wrench

The connectors

should be

outdoors

Indoors Outdoors

Pagina se încarcă ...

Tesla TT34EX81-1232IAW Manual de utilizare

Acest manual este potrivit și pentru

Tesla TT34EX81-1232IAW Manual de utilizare

Lucrări conexe

Alte documente